scala.collection.GenTraversableViewLike
A fall back which forces everything into a vector and then applies an operation on it.
The implementation base trait of this view.
Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.
Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.
Note: /: is alternate syntax for foldLeft; z /: xs is the same as
xs foldLeft z.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this collection or iterator,
going left to right with the start value z on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x1, ..., xn are the elements of this collection or iterator.
Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.
Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as
xs foldRight z.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op between consecutive elements of this collection or iterator,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this collection or iterator.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold and reduce. It has similar
semantics, but does not require the result to be a supertype of the
element type. It traverses the elements in different partitions
sequentially, using seqop to update the result, and then applies
combop to results from different partitions. The implementation of
this operation may operate on an arbitrary number of collection
partitions, so combop may be invoked an arbitrary number of times.
For example, one might want to process some elements and then produce
a Set. In this case, seqop would process an element and append it
to the list, while combop would concatenate two lists from different
partitions together. The initial value z would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop operator (e.g.
Nil for list concatenation or 0 for summation) and may be evaluated
more than once
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Counts the number of elements in the collection or iterator which satisfy a predicate.
Counts the number of elements in the collection or iterator which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p.
Selects all elements except first n ones.
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to drop from this general collection.
a general collection consisting of all elements of this general collection except the first n ones, or else the
empty general collection, if this general collection has less than n elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The predicate used to test elements.
the longest suffix of this general collection whose first element
does not satisfy the predicate p.
Selects all elements of this general collection which satisfy a predicate.
Selects all elements of this general collection which satisfy a predicate.
the predicate used to test elements.
a new general collection consisting of all elements of this general collection that satisfy the given
predicate p. Their order may not be preserved.
Selects all elements of this general collection which do not satisfy a predicate.
Selects all elements of this general collection which do not satisfy a predicate.
the predicate used to test elements.
a new general collection consisting of all elements of this general collection that do not satisfy the given
predicate p. Their order may not be preserved.
Finds the first element of the collection or iterator satisfying a predicate, if any.
Finds the first element of the collection or iterator satisfying a predicate, if any.
Note: may not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an option value containing the first element in the collection or iterator
that satisfies p, or None if none exists.
Folds the elements of this collection or iterator using the specified associative binary operator.
Folds the elements of this collection or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
a type parameter for the binary operator, a supertype of A.
a neutral element for the fold operation; may be added to the result
an arbitrary number of times, and must not change the result (e.g., Nil for list concatenation,
0 for addition, or 1 for multiplication.)
a binary operator that must be associative
the result of applying fold operator op between all the elements and z
Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.
Applies a binary operator to a start value and all elements of this collection or iterator, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this collection or iterator,
going left to right with the start value z on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x1, ..., xn are the elements of this collection or iterator.
Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.
Applies a binary operator to all elements of this collection or iterator and a start value, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this collection or iterator,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this collection or iterator.
Partitions this general collection into a map of general collections according to some discriminator function.
Partitions this general collection into a map of general collections according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new general collection.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to general collections such that the following invariant holds:
(xs groupBy f)(k) = xs filter (x => f(x) == k) That is, every key k is bound to a general collection of those elements x
for which f(x) equals k.
Selects the first element of this collection.
Selects the first element of this collection.
the first element of this collection.
if the collection is empty.
Optionally selects the first element.
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this general collection if it is nonempty,
None if it is empty.
Selects all elements except the last.
Selects all elements except the last.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a general collection consisting of all elements of this general collection except the last one.
if the general collection is empty.
Tests whether this collection is empty.
Tests whether this collection is empty.
true if the collection contain no elements, false otherwise.
Tests whether this general collection can be repeatedly traversed.
Tests whether this general collection can be repeatedly traversed.
true
Selects the last element.
Selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The last element of this general collection.
If the general collection is empty.
Optionally selects the last element.
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the last element of this general collection$ if it is nonempty,
None if it is empty.
Displays all elements of this collection or iterator in a string.
Displays all elements of this collection or iterator in a string.
a string representation of this collection or iterator. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this collection or iterator follow each other without any
separator string.
Displays all elements of this collection or iterator in a string using a separator string.
Displays all elements of this collection or iterator in a string using a separator string.
the separator string.
a string representation of this collection or iterator. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this collection or iterator are separated by the string sep.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this collection or iterator in a string using start, end, and separator strings.
Displays all elements of this collection or iterator in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this collection or iterator. The resulting string
begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method
toString) of all elements of this collection or iterator are separated by
the string sep.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Tests whether the collection or iterator is not empty.
Tests whether the collection or iterator is not empty.
true if the collection or iterator contains at least one element, false otherwise.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this general collection in two general collections according to a predicate.
Partitions this general collection in two general collections according to a predicate.
the predicate on which to partition.
a pair of general collections: the first general collection consists of all elements that
satisfy the predicate p and the second general collection consists of all elements
that don't. The relative order of the elements in the resulting general collections
may not be preserved.
Reduces the elements of this collection or iterator using the specified associative binary operator.
Reduces the elements of this collection or iterator using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
The result of applying reduce operator op between all the elements if the collection or iterator is nonempty.
if this collection or iterator is empty.
Optionally applies a binary operator to all elements of this collection or iterator, going left to right.
Optionally applies a binary operator to all elements of this collection or iterator, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op) is this collection or iterator is nonempty,
None otherwise.
Reduces the elements of this collection or iterator, if any, using the specified associative binary operator.
Reduces the elements of this collection or iterator, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
An option value containing result of applying reduce operator op between all
the elements if the collection is nonempty, and None otherwise.
Applies a binary operator to all elements of this collection or iterator, going right to left.
Applies a binary operator to all elements of this collection or iterator, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this collection or iterator,
going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...)) where x1, ..., xn are the elements of this collection or iterator.
if this collection or iterator is empty.
Optionally applies a binary operator to all elements of this collection or iterator, going right to left.
Optionally applies a binary operator to all elements of this collection or iterator, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op) is this collection or iterator is nonempty,
None otherwise.
Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new general collection containing the prefix scan of the elements in this general collection
Produces a collection containing cumulative results of applying the operator going left to right.
Produces a collection containing cumulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left.
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight has changed. The previous behavior can be reproduced with scanRight.reverse.
The size of this general collection.
The size of this general collection.
Note: will not terminate for infinite-sized collections.
the number of elements in this general collection.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x which satisfy the invariant:
from <= indexOf(x) < until
Note: might return different results for different runs, unless the underlying collection type is ordered.
the lowest index to include from this general collection.
the lowest index to EXCLUDE from this general collection.
a general collection containing the elements greater than or equal to
index from extending up to (but not including) index until
of this general collection.
Splits this general collection into a prefix/suffix pair according to a predicate.
Splits this general collection into a prefix/suffix pair according to a predicate.
Note: c span p is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p), provided the evaluation of the
predicate p does not cause any side-effects.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the test predicate
a pair consisting of the longest prefix of this general collection whose
elements all satisfy p, and the rest of this general collection.
Splits this general collection into two at a given position.
Splits this general collection into two at a given position.
Note: c splitAt n is equivalent to (but possibly more efficient than)
(c take n, c drop n).
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of general collections consisting of the first n
elements of this general collection, and the other elements.
Selects all elements except the first.
Selects all elements except the first.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a general collection consisting of all elements of this general collection except the first one.
if the general collection is empty.
Selects first n elements.
Selects first n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to take from this general collection.
a general collection consisting only of the first n elements of this general collection,
or else the whole general collection, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The predicate used to test elements.
the longest prefix of this general collection whose elements all satisfy
the predicate p.
Uses the contents of this collection or iterator to create a new mutable buffer.
Uses the contents of this collection or iterator to create a new mutable buffer.
Note: will not terminate for infinite-sized collections.
a buffer containing all elements of this collection or iterator.
Converts this collection or iterator to an indexed sequence.
Converts this collection or iterator to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this collection or iterator.
Converts this collection or iterator to an iterable collection.
Converts this collection or iterator to an iterable collection. Note that
the choice of target Iterable is lazy in this default implementation
as this TraversableOnce may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
Note: will not terminate for infinite-sized collections.
an Iterable containing all elements of this collection or iterator.
Returns an Iterator over the elements in this collection or iterator.
Returns an Iterator over the elements in this collection or iterator. Will return the same Iterator if this instance is already an Iterator.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this collection or iterator.
Converts this collection or iterator to a list.
Converts this collection or iterator to a list.
Note: will not terminate for infinite-sized collections.
a list containing all elements of this collection or iterator.
Converts this collection or iterator to a sequence.
Converts this collection or iterator to a sequence. As with toIterable, it's lazy
in this default implementation, as this TraversableOnce may be
lazy and unevaluated.
Note: will not terminate for infinite-sized collections.
a sequence containing all elements of this collection or iterator.
Converts this collection or iterator to a set.
Converts this collection or iterator to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this collection or iterator.
Converts this collection or iterator to a stream.
Converts this collection or iterator to a stream.
Note: will not terminate for infinite-sized collections.
a stream containing all elements of this collection or iterator.
Converts this collection or iterator to an unspecified Traversable.
Converts this collection or iterator to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this collection or iterator.
Converts this collection or iterator to a Vector.
Converts this collection or iterator to a Vector.
Note: will not terminate for infinite-sized collections.
a vector containing all elements of this collection or iterator.
[use case] Returns a new collection containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new collection containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the collection is the most specific superclass encompassing the element types of the two operands.
Example:
scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = LinkedList(2) b: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val c = a ++ b c: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> val d = LinkedList('a') d: scala.collection.mutable.LinkedList[Char] = LinkedList(a) scala> val e = c ++ d e: scala.collection.mutable.LinkedList[AnyVal] = LinkedList(1, 2, a)
the element type of the returned collection.
the traversable to append.
a new collection which contains all elements of this collection
followed by all elements of that.
[use case] Builds a new collection by applying a partial function to all elements of this collection on which the function is defined.
Builds a new collection by applying a partial function to all elements of this collection on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the collection.
a new collection resulting from applying the given partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
The factory companion object that builds instances of class CC.
The factory companion object that builds instances of class CC.
(or its Iterable superclass where class CC is not a Seq.)
[use case] Copies values of this collection to an array.
Copies values of this collection to an array.
Fills the given array xs with values of this collection, beginning at index start.
Copying will stop once either the end of the current collection is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the array to fill.
the starting index.
[use case] Copies values of this collection to an array.
Copies values of this collection to an array.
Fills the given array xs with values of this collection.
Copying will stop once either the end of the current collection is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the array to fill.
[use case] Builds a new collection by applying a function to all elements of this collection and using the elements of the resulting collections.
Builds a new collection by applying a function to all elements of this collection and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of collection. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new collection resulting from applying the given collection-valued function
f to each element of this collection and concatenating the results.
[use case] Converts this collection of traversable collections into a collection formed by the elements of these traversable collections.
Converts this collection of traversable collections into a collection formed by the elements of these traversable collections.
The resulting collection's type will be guided by the static type of collection. For example:
val xs = List( Set(1, 2, 3), Set(1, 2, 3) ).flatten // xs == List(1, 2, 3, 1, 2, 3) val ys = Set( List(1, 2, 3), List(3, 2, 1) ).flatten // ys == Set(1, 2, 3)
the type of the elements of each traversable collection.
a new collection resulting from concatenating all element collections.
[use case]
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Returns string formatted according to given format string.
Returns string formatted according to given format string.
Format strings are as for String.format
(@see java.lang.String.format).
The generic builder that builds instances of CC at arbitrary element types.
The generic builder that builds instances of CC at arbitrary element types.
[use case] Builds a new collection by applying a function to all elements of this collection.
Builds a new collection by applying a function to all elements of this collection.
the element type of the returned collection.
the function to apply to each element.
a new collection resulting from applying the given function
f to each element of this collection and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this collection.
[use case] Finds the first element which yields the largest value measured by function f.
Finds the first element which yields the largest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this collection with the largest value measured by function f.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this collection
[use case] Finds the first element which yields the smallest value measured by function f.
Finds the first element which yields the smallest value measured by function f.
The result type of the function f.
The measuring function.
the first element of this collection with the smallest value measured by function f.
The builder that builds instances of type CC[A]
The builder that builds instances of type CC[A]
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray or mutable.ParHashMap) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements in this collection of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the collection and as result type of product.
Examples of such types are: Long, Float, Double, BigInt.
Defines the prefix of this object's toString representation.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString
applied to this collection. By default the string prefix is the
simple name of the collection class collection.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements in this collection of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the collection and as result type of sum.
Examples of such types are: Long, Float, Double, BigInt.
[use case] Converts this collection into another by copying all elements.
Converts this collection into another by copying all elements.
Note: will not terminate for infinite-sized collections.
The collection type to build.
a new collection containing all elements of this collection.
[use case] Converts this collection to an array.
Converts this collection to an array.
Note: will not terminate for infinite-sized collections.
an array containing all elements of this collection.
An ClassTag must be available for the element type of this collection.
[use case] Converts this collection to a map.
Converts this collection to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
Note: will not terminate for infinite-sized collections.
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U) of this collection.
Transposes this collection of traversable collections into a collection of collections.
Transposes this collection of traversable collections into a collection of collections.
The resulting collection's type will be guided by the static type of collection. For example:
val xs = List( Set(1, 2, 3), Set(4, 5, 6)).transpose // xs == List( // List(1, 4), // List(2, 5), // List(3, 6)) val ys = Vector( List(1, 2, 3), List(4, 5, 6)).transpose // ys == Vector( // Vector(1, 4), // Vector(2, 5), // Vector(3, 6))
the type of the elements of each traversable collection.
an implicit conversion which asserts that the
element type of this collection is a Traversable.
a two-dimensional collection of collections which has as nth row the nth column of this collection.
(Changed in version 2.9.0) transpose throws an IllegalArgumentException if collections are not uniformly sized.
if all collections in this collection are not of the same size.
Converts this collection of pairs into two collections of the first and second half of each pair.
Converts this collection of pairs into two collections of the first and second half of each pair.
val xs = CC( (1, "one"), (2, "two"), (3, "three")).unzip // xs == (CC(1, 2, 3), // CC(one, two, three))
the type of the first half of the element pairs
the type of the second half of the element pairs
an implicit conversion which asserts that the element type of this collection is a pair.
a pair of collections, containing the first, respectively second half of each element pair of this collection.
Converts this collection of triples into three collections of the first, second, and third element of each triple.
Converts this collection of triples into three collections of the first, second, and third element of each triple.
val xs = CC( (1, "one", '1'), (2, "two", '2'), (3, "three", '3')).unzip3 // xs == (CC(1, 2, 3), // CC(one, two, three), // CC(1, 2, 3))
the type of the first member of the element triples
the type of the second member of the element triples
the type of the third member of the element triples
an implicit conversion which asserts that the element type of this collection is a triple.
a triple of collections, containing the first, second, respectively third member of each element triple of this collection.