Uses of Package
com.diozero.api

Packages that use com.diozero.api

Package	Description
com.diozero.animation
com.diozero.api	APIs for interfacing with the host board.
com.diozero.api.function
com.diozero.api.sandpit
com.diozero.devices	Classes representing actual devices such as LEDs, Buttons as well as GPIO, devices that are connected via I2C, SPI and Serial interfaces.
com.diozero.devices.imu
com.diozero.devices.mcp23xxx
com.diozero.devices.motor
com.diozero.devices.oled
com.diozero.devices.sandpit
com.diozero.internal
com.diozero.internal.board.allwinner
com.diozero.internal.board.chip
com.diozero.internal.board.odroid
com.diozero.internal.board.raspberrypi
com.diozero.internal.board.tinkerboard
com.diozero.internal.provider.builtin	The built-in default provider supporting GPIO, I2C, SPI and Serial device communication.
com.diozero.internal.provider.builtin.gpio
com.diozero.internal.provider.builtin.i2c
com.diozero.internal.provider.builtin.serial
com.diozero.internal.provider.builtin.spi
com.diozero.internal.spi	Service Provider Interface package.
com.diozero.sbc

Classes in com.diozero.api used by com.diozero.animation

Class	Description
OutputDeviceInterface	Represents a device capable of output (digital or analog).

Classes in com.diozero.api used by com.diozero.api

Class	Description
AbstractDigitalInputDevice	Abstract base class for low-level GPIO digital input devices.
AnalogInputEvent	Represents an input event from an analog device.
DeviceEvent	Abstract class representing an event from a GPIO device.
DeviceInterface
DeviceMode	Valid GPIO modes
DigitalInputDevice	Represents a generic digital input device.
DigitalInputDevice.Builder
DigitalInputDeviceInterface	Base interface for devices with digital input.
DigitalInputEvent	Represents an input event from a digital device.
Event
GpioDevice	Abstract base class for all GPIO related devices.
GpioEventTrigger	Values for input event triggers - none (no events), rising edge (transition from off to on), falling (transition from on to off) and both
GpioInputDevice	Common base class for digital and analog input devices.
GpioPullUpDown
I2CConstants.AddressSize
I2CDevice	Utility class for interfacing with to I2C devices.
I2CDevice.Builder	I2C device builder.
I2CDevice.ProbeMode
I2CDeviceInterface	Inter-Integrated Circuit (I2C) Interface
I2CDeviceInterface.I2CMessage
I2CSMBusInterface	I2C device interface Linux SMBus interface
NoSuchDeviceException
OutputDeviceCollection	A collection of output devices to simplify setting the same output value for a number of devices at the same time
OutputDeviceInterface	Represents a device capable of output (digital or analog).
PinInfo	Describe the various attributes of an individual General-Purpose Input/Output (GPIO) pin.
PwmType
RuntimeIOException
SerialConstants
SerialConstants.DataBits	The number of data bits to use per word.
SerialConstants.Parity	Specifies how error detection is carried out.
SerialConstants.ReadMode	Specifies read mode: whether non-blocking, semi-blocking, blocking; also whether blocks with or without timeout.
SerialConstants.StopBits	The number of stop bits.
SerialDevice	Serial device.
SerialDevice.Builder	Serial device builder.
SerialDevice.DeviceInfo	Provides descriptive information for a connected serial device.
SerialDeviceInterface	Serial Port Interface
Servo
Servo.OutputDeviceUnit
Servo.Trim
SpiClockMode	SPI clock mode determines the clock polarity and phase with respect to data.
SpiDevice	Serial Peripheral Interface device
SpiDevice.Builder	I2C device builder.
SpiDeviceInterface	Serial Peripheral Interface (SPI)
WaitableDigitalInputDevice	Represents a digital input device with distinct waitable states (active / inactive).

Classes in com.diozero.api used by com.diozero.api.function

Class	Description
DeviceEvent	Abstract class representing an event from a GPIO device.

Classes in com.diozero.api used by com.diozero.api.sandpit

Class	Description
Event

Classes in com.diozero.api used by com.diozero.devices

Class	Description
AbstractDigitalInputDevice	Abstract base class for low-level GPIO digital input devices.
AnalogInputDevice	The AnalogInputDevice base class encapsulates logic for interfacing with analog devices.
DeviceInterface
DeviceMode	Valid GPIO modes
DigitalInputDevice	Represents a generic digital input device.
DigitalInputDeviceInterface	Base interface for devices with digital input.
DigitalInputEvent	Represents an input event from a digital device.
DigitalOutputDevice	Provides generic digital (on/off) output control with support for active high and low logic.
Event
GpioDevice	Abstract base class for all GPIO related devices.
GpioEventTrigger	Values for input event triggers - none (no events), rising edge (transition from off to on), falling (transition from on to off) and both
GpioInputDevice	Common base class for digital and analog input devices.
GpioPullUpDown
OutputDeviceInterface	Represents a device capable of output (digital or analog).
PinInfo	Describe the various attributes of an individual General-Purpose Input/Output (GPIO) pin.
PwmOutputDevice	Provide generic Pulse Width Modulation (PWM) output control.
RuntimeIOException
SpiClockMode	SPI clock mode determines the clock polarity and phase with respect to data.

Classes in com.diozero.api used by com.diozero.devices.imu

Class	Description
DeviceInterface
RuntimeIOException

Classes in com.diozero.api used by com.diozero.devices.mcp23xxx

Class	Description
DeviceInterface
DeviceMode	Valid GPIO modes
DigitalInputEvent	Represents an input event from a digital device.
GpioEventTrigger	Values for input event triggers - none (no events), rising edge (transition from off to on), falling (transition from on to off) and both
GpioPullUpDown
PinInfo	Describe the various attributes of an individual General-Purpose Input/Output (GPIO) pin.
RuntimeIOException

Classes in com.diozero.api used by com.diozero.devices.motor

Class	Description
DeviceInterface
DigitalOutputDevice	Provides generic digital (on/off) output control with support for active high and low logic.
PwmOutputDevice	Provide generic Pulse Width Modulation (PWM) output control.
RuntimeIOException

Classes in com.diozero.api used by com.diozero.devices.oled

Class	Description
DeviceInterface
DigitalOutputDevice	Provides generic digital (on/off) output control with support for active high and low logic.

Classes in com.diozero.api used by com.diozero.devices.sandpit

Class	Description
AbstractDigitalInputDevice	Abstract base class for low-level GPIO digital input devices.
DeviceInterface
DigitalInputDevice	Represents a generic digital input device.
DigitalInputDeviceInterface	Base interface for devices with digital input.
DigitalInputEvent	Represents an input event from a digital device.
GpioDevice	Abstract base class for all GPIO related devices.
GpioEventTrigger	Values for input event triggers - none (no events), rising edge (transition from off to on), falling (transition from on to off) and both
GpioInputDevice	Common base class for digital and analog input devices.
GpioPullUpDown
RuntimeIOException
SmoothedInputDevice	Represents a generic input device which takes its value from the number of active events over a specific time period.
WaitableDigitalInputDevice	Represents a digital input device with distinct waitable states (active / inactive).

Classes in com.diozero.api used by com.diozero.internal

Class	Description
DeviceInterface

Classes in com.diozero.api used by com.diozero.internal.board.allwinner

Class	Description
DeviceMode	Valid GPIO modes
GpioPullUpDown

Classes in com.diozero.api used by com.diozero.internal.board.chip

Class	Description
DeviceMode	Valid GPIO modes
GpioPullUpDown

Classes in com.diozero.api used by com.diozero.internal.board.odroid

Class	Description
DeviceInterface
DeviceMode	Valid GPIO modes
GpioPullUpDown
PwmPinInfo	Describe the various attributes of an individual General-Purpose Input/Output (GPIO) pin used for Pulse Width Modulation (PWM) output.
RuntimeIOException

Classes in com.diozero.api used by com.diozero.internal.board.raspberrypi

Class	Description
DeviceMode	Valid GPIO modes
GpioPullUpDown

Classes in com.diozero.api used by com.diozero.internal.board.tinkerboard

Class	Description
DeviceMode	Valid GPIO modes
GpioPullUpDown

Classes in com.diozero.api used by com.diozero.internal.provider.builtin

Class	Description
DeviceInterface
DeviceMode	Valid GPIO modes
GpioEventTrigger	Values for input event triggers - none (no events), rising edge (transition from off to on), falling (transition from on to off) and both
GpioPullUpDown
I2CConstants.AddressSize
PinInfo	Describe the various attributes of an individual General-Purpose Input/Output (GPIO) pin.
PwmPinInfo	Describe the various attributes of an individual General-Purpose Input/Output (GPIO) pin used for Pulse Width Modulation (PWM) output.
RuntimeIOException
SerialConstants.DataBits	The number of data bits to use per word.
SerialConstants.Parity	Specifies how error detection is carried out.
SerialConstants.StopBits	The number of stop bits.
SerialDeviceInterface	Serial Port Interface
SpiClockMode	SPI clock mode determines the clock polarity and phase with respect to data.
SpiDeviceInterface	Serial Peripheral Interface (SPI)

Classes in com.diozero.api used by com.diozero.internal.provider.builtin.gpio

Class	Description
DeviceMode	Valid GPIO modes
GpioEventTrigger	Values for input event triggers - none (no events), rising edge (transition from off to on), falling (transition from on to off) and both
GpioPullUpDown

Classes in com.diozero.api used by com.diozero.internal.provider.builtin.i2c

Class	Description
DeviceInterface
I2CConstants.AddressSize
I2CDevice.ProbeMode
I2CDeviceInterface	Inter-Integrated Circuit (I2C) Interface
I2CDeviceInterface.I2CMessage
I2CSMBusInterface	I2C device interface Linux SMBus interface

Classes in com.diozero.api used by com.diozero.internal.provider.builtin.serial

Class	Description
SerialConstants.DataBits	The number of data bits to use per word.
SerialConstants.Parity	Specifies how error detection is carried out.
SerialConstants.StopBits	The number of stop bits.

Classes in com.diozero.api used by com.diozero.internal.provider.builtin.spi

Class	Description
SpiClockMode	SPI clock mode determines the clock polarity and phase with respect to data.

Classes in com.diozero.api used by com.diozero.internal.spi

Class	Description
AnalogInputEvent	Represents an input event from an analog device.
DeviceEvent	Abstract class representing an event from a GPIO device.
DeviceInterface
DeviceMode	Valid GPIO modes
DigitalInputEvent	Represents an input event from a digital device.
GpioEventTrigger	Values for input event triggers - none (no events), rising edge (transition from off to on), falling (transition from on to off) and both
GpioPullUpDown
I2CConstants.AddressSize
I2CDeviceInterface	Inter-Integrated Circuit (I2C) Interface
I2CSMBusInterface	I2C device interface Linux SMBus interface
PinInfo	Describe the various attributes of an individual General-Purpose Input/Output (GPIO) pin.
RuntimeIOException
SerialConstants.DataBits	The number of data bits to use per word.
SerialConstants.Parity	Specifies how error detection is carried out.
SerialConstants.StopBits	The number of stop bits.
SerialDeviceInterface	Serial Port Interface
SpiClockMode	SPI clock mode determines the clock polarity and phase with respect to data.
SpiDeviceInterface	Serial Peripheral Interface (SPI)

Classes in com.diozero.api used by com.diozero.sbc

Class	Description
DeviceMode	Valid GPIO modes
NoSuchDeviceException
PinInfo	Describe the various attributes of an individual General-Purpose Input/Output (GPIO) pin.