Uses of Package
com.diozero.devices

Packages that use com.diozero.devices

Package	Description
com.diozero.devices	Classes representing actual devices such as LEDs, Buttons as well as GPIO, devices that are connected via I2C, SPI and Serial interfaces.
com.diozero.devices.mcp23xxx
com.diozero.devices.motor
com.diozero.devices.sandpit

Classes in com.diozero.devices used by com.diozero.devices

Class	Description
Ads112C04
Ads112C04.AdcEvent
Ads112C04.Address	The ADS112C04 has two address pins: A0 and A1.
Ads112C04.Builder
Ads112C04.BurnoutCurrentSources
Ads112C04.ConfigRegister
Ads112C04.ConversionMode
Ads112C04.CrcConfig
Ads112C04.DataCounter
Ads112C04.DataRate
Ads112C04.GainConfig
Ads112C04.Idac1RoutingConfig
Ads112C04.Idac2RoutingConfig
Ads112C04.IdacCurrent
Ads112C04.InputMultiplexerConfig	Input multiplexer configuration
Ads112C04.OperatingMode
Ads112C04.Pga
Ads112C04.TemperatureSensorMode
Ads112C04.VRef
Ads1x15.Address	I2C address configuration
Ads1x15.Ads1015DataRate	Number of samples per second
Ads1x15.Ads1115DataRate	Number of samples per second
Ads1x15.ComparatorMode
Ads1x15.ComparatorPolarity
Ads1x15.ComparatorQueue	Comparator queue configuration
Ads1x15.Mode	Read mode - continuous or single
Ads1x15.Model
Ads1x15.PgaConfig	Programmable Gain Amplifier configuration.
BarometerInterface
BH1750.Mode
BME280.FilterCoefficient	IIR Filter coefficient; can be FILTER_OFF, _2, _4, _8, _16.
BME280.HumidityOversampling	Humidity oversampling multiplier; value can be OVERSAMPLING_1, _2, _4, _8, _16.
BME280.Model
BME280.OperatingMode	Operating mode; value can be MODE_SLEEP, _FORCED, or _NORMAL.
BME280.PressureOversampling	Pressure oversampling multiplier; value can be OVERSAMPLING_1, _2, _4, _8, _16.
BME280.StandbyDuration	Inactive duration in standby mode; can be STANDBY_ 500_US (0.5 ms) 62_5_MS (62.5 ms) 125_MS (125 ms) 250_MS (250 ms) 500_MS (500 ms) 1_S (1 second) 10_MS (10 ms) 20_MS (20 ms)
BME280.TemperatureOversampling	Temperature oversampling multiplier; value can be OVERSAMPLING_1, _2, _4, _8, _16.
BME680.Data
BME680.FilterSize	IIR filter size.
BME680.HeaterProfile	Gas heater profile.
BME680.OversamplingMultiplier	Oversampling multiplier.
BME680.PowerMode	Power mode.
BMP180.BMPMode	Relationship between sampling mode and conversion delay (in ms) for each sampling mode Ultra low power: 4.5 ms minimum conversion delay Standard: 7.5 ms High Resolution: 13.5 ms Ultra high Resolution: 25.5 ms
DistanceSensorInterface
GpioExpander	Interface for GPIO expansion boards such as the MCP23xxx family of devices
HD44780Lcd	LCD with HD44780 controller. Code based on this Raspberry-Pi Spy article, Python code.
HD44780Lcd.LcdConnection
HygrometerInterface
LED	Provides utility methods for controlling a Light Emitting Diode (LED).
LM73.Configuration
LM73.Resolution
LuminositySensorInterface
McpAdc.Type	The MCP3204/3208 devices offer the choice of using the analog input channels configured as single-ended inputs or pseudo-differential pairs.
McpEeprom.Type
MFRC522.AntennaGain
MFRC522.PiccType
MFRC522.StatusCode
MFRC522.UID
PCF8591.InputMode
PiconZero
PiconZero.InputConfig
PiconZero.OutputConfig
PwmLed	PWM controlled LED.
SensorInterface
SGP30.FeatureSetVersion
SGP30.RawMeasurement
SGP30.SGP30Measurement
ThermometerInterface
TSL2561.TSL2561Package
W1ThermSensor
W1ThermSensor.Type

Classes in com.diozero.devices used by com.diozero.devices.mcp23xxx

Class	Description
GpioExpander	Interface for GPIO expansion boards such as the MCP23xxx family of devices

Classes in com.diozero.devices used by com.diozero.devices.motor

Class	Description
PiconZero

Classes in com.diozero.devices used by com.diozero.devices.sandpit

Class	Description
DistanceSensorInterface
SensorInterface