Uses of Class
tss.CmdStructure

Packages that use CmdStructure

Package	Description
tss
tss.tpm

Uses of CmdStructure in tss

Subclasses of CmdStructure in tss

Modifier and Type	Class	Description
class	ReqStructure	Base class for custom (not TPM 2.0 spec defined) auto-generated data structures representing a TPM command parameters and handles, if any.
class	RespStructure	Base class for custom (not TPM 2.0 spec defined) auto-generated data structures representing a TPM response parameters and handles, if any.

Uses of CmdStructure in tss.tpm

Subclasses of CmdStructure in tss.tpm

Modifier and Type	Class	Description
class	AC_GetCapabilityResponse	The purpose of this command is to obtain information about an Attached Component referenced by an AC handle.
class	AC_SendResponse	The purpose of this command is to send (copy) a loaded object from the TPM to an Attached Component.
class	ActivateCredentialResponse	This command enables the association of a credential with an object in a way that ensures that the TPM has validated the parameters of the credentialed object.
class	CertifyCreationResponse	This command is used to prove the association between an object and its creation data.
class	CertifyResponse	The purpose of this command is to prove that an object with a specific Name is loaded in the TPM.
class	CertifyX509Response	The purpose of this command is to generate an X.509 certificate that proves an object with a specific public key and attributes is loaded in the TPM.
class	CommitResponse	TPM2_Commit() performs the first part of an ECC anonymous signing operation.
class	ContextLoadResponse	This command is used to reload a context that has been saved by TPM2_ContextSave().
class	ContextSaveResponse	This command saves a session context, object context, or sequence object context outside the TPM.
class	CreateLoadedResponse	This command creates an object and loads it in the TPM.
class	CreatePrimaryResponse	This command is used to create a Primary Object under one of the Primary Seeds or a Temporary Object under TPM_RH_NULL.
class	CreateResponse	This command is used to create an object that can be loaded into a TPM using TPM2_Load().
class	DuplicateResponse	This command duplicates a loaded object so that it may be used in a different hierarchy.
class	EC_EphemeralResponse	TPM2_EC_Ephemeral() creates an ephemeral key for use in a two-phase key exchange protocol.
class	ECC_DecryptResponse	This command performs ECC decryption.
class	ECC_EncryptResponse	This command performs ECC encryption as described in Part 1, Annex D.
class	ECC_ParametersResponse	This command returns the parameters of an ECC curve identified by its TCG-assigned curveID.
class	ECDH_KeyGenResponse	This command uses the TPM to generate an ephemeral key pair (de, Qe where Qe [de]G).
class	ECDH_ZGenResponse	This command uses the TPM to recover the Z value from a public point (QB) and a private key (ds).
class	EncryptDecrypt2Response	This command is identical to TPM2_EncryptDecrypt(), except that the inData parameter is the first parameter.
class	EncryptDecryptResponse	NOTE 1 This command is deprecated, and TPM2_EncryptDecrypt2() is preferred.
class	EventSequenceCompleteResponse	This command adds the last part of data, if any, to an Event Sequence and returns the result in a digest list.
class	FieldUpgradeDataResponse	This command will take the actual field upgrade image to be installed on the TPM.
class	FirmwareReadResponse	This command is used to read a copy of the current firmware installed in the TPM.
class	GetCapabilityResponse	This command returns various information regarding the TPM and its current state.
class	GetCommandAuditDigestResponse	This command returns the current value of the command audit digest, a digest of the commands being audited, and the audit hash algorithm.
class	GetRandomResponse	This command returns the next bytesRequested octets from the random number generator (RNG).
class	GetSessionAuditDigestResponse	This command returns a digital signature of the audit session digest.
class	GetTestResultResponse	This command returns manufacturer-specific information regarding the results of a self-test and an indication of the test status.
class	GetTimeResponse	This command returns the current values of Time and Clock.
class	HashResponse	This command performs a hash operation on a data buffer and returns the results.
class	HashSequenceStartResponse	This command starts a hash or an Event Sequence.
class	HMAC_StartResponse	This command starts an HMAC sequence.
class	HMACResponse	This command performs an HMAC on the supplied data using the indicated hash algorithm.
class	ImportResponse	This command allows an object to be encrypted using the symmetric encryption values of a Storage Key.
class	IncrementalSelfTestResponse	This command causes the TPM to perform a test of the selected algorithms.
class	LoadExternalResponse	This command is used to load an object that is not a Protected Object into the TPM.
class	LoadResponse	This command is used to load objects into the TPM.
class	MAC_StartResponse	This command starts a MAC sequence.
class	MACResponse	This command performs an HMAC or a block cipher MAC on the supplied data using the indicated algorithm.
class	MakeCredentialResponse	This command allows the TPM to perform the actions required of a Certificate Authority (CA) in creating a TPM2B_ID_OBJECT containing an activation credential.
class	NV_CertifyResponse	The purpose of this command is to certify the contents of an NV Index or portion of an NV Index.
class	NV_ReadPublicResponse	This command is used to read the public area and Name of an NV Index.
class	NV_ReadResponse	This command reads a value from an area in NV memory previously defined by TPM2_NV_DefineSpace().
class	ObjectChangeAuthResponse	This command is used to change the authorization secret for a TPM-resident object.
class	PCR_AllocateResponse	This command is used to set the desired PCR allocation of PCR and algorithms.
class	PCR_EventResponse	This command is used to cause an update to the indicated PCR.
class	PCR_ReadResponse	This command returns the values of all PCR specified in pcrSelectionIn.
class	PolicyGetDigestResponse	This command returns the current policyDigest of the session.
class	PolicySecretResponse	This command includes a secret-based authorization to a policy.
class	PolicySignedResponse	This command includes a signed authorization in a policy.
class	QuoteResponse	This command is used to quote PCR values.
class	ReadClockResponse	This command reads the current TPMS_TIME_INFO structure that contains the current setting of Time, Clock, resetCount, and restartCount.
class	ReadPublicResponse	This command allows access to the public area of a loaded object.
class	RewrapResponse	This command allows the TPM to serve in the role as a Duplication Authority.
class	RSA_DecryptResponse	This command performs RSA decryption using the indicated padding scheme according to IETF RFC 8017 ((PKCS#1).
class	RSA_EncryptResponse	This command performs RSA encryption using the indicated padding scheme according to IETF RFC 8017.
class	SequenceCompleteResponse	This command adds the last part of data, if any, to a hash/HMAC sequence and returns the result.
class	SignResponse	This command causes the TPM to sign an externally provided hash with the specified symmetric or asymmetric signing key.
class	StartAuthSessionResponse	This command is used to start an authorization session using alternative methods of establishing the session key (sessionKey).
class	TPM2_AC_GetCapability_REQUEST	The purpose of this command is to obtain information about an Attached Component referenced by an AC handle.
class	TPM2_AC_Send_REQUEST	The purpose of this command is to send (copy) a loaded object from the TPM to an Attached Component.
class	TPM2_ACT_SetTimeout_REQUEST	This command is used to set the time remaining before an Authenticated Countdown Timer (ACT) expires.
class	TPM2_ActivateCredential_REQUEST	This command enables the association of a credential with an object in a way that ensures that the TPM has validated the parameters of the credentialed object.
class	TPM2_Certify_REQUEST	The purpose of this command is to prove that an object with a specific Name is loaded in the TPM.
class	TPM2_CertifyCreation_REQUEST	This command is used to prove the association between an object and its creation data.
class	TPM2_CertifyX509_REQUEST	The purpose of this command is to generate an X.509 certificate that proves an object with a specific public key and attributes is loaded in the TPM.
class	TPM2_ChangeEPS_REQUEST	This replaces the current endorsement primary seed (EPS) with a value from the RNG and sets the Endorsement hierarchy controls to their default initialization values: ehEnable is SET, endorsementAuth and endorsementPolicy are both set to the Empty Buffer.
class	TPM2_ChangePPS_REQUEST	This replaces the current platform primary seed (PPS) with a value from the RNG and sets platformPolicy to the default initialization value (the Empty Buffer).
class	TPM2_Clear_REQUEST	This command removes all TPM context associated with a specific Owner.
class	TPM2_ClearControl_REQUEST	TPM2_ClearControl() disables and enables the execution of TPM2_Clear().
class	TPM2_ClockRateAdjust_REQUEST	This command adjusts the rate of advance of Clock and Time to provide a better approximation to real time.
class	TPM2_ClockSet_REQUEST	This command is used to advance the value of the TPMs Clock.
class	TPM2_Commit_REQUEST	TPM2_Commit() performs the first part of an ECC anonymous signing operation.
class	TPM2_ContextLoad_REQUEST	This command is used to reload a context that has been saved by TPM2_ContextSave().
class	TPM2_ContextSave_REQUEST	This command saves a session context, object context, or sequence object context outside the TPM.
class	TPM2_Create_REQUEST	This command is used to create an object that can be loaded into a TPM using TPM2_Load().
class	TPM2_CreateLoaded_REQUEST	This command creates an object and loads it in the TPM.
class	TPM2_CreatePrimary_REQUEST	This command is used to create a Primary Object under one of the Primary Seeds or a Temporary Object under TPM_RH_NULL.
class	TPM2_DictionaryAttackLockReset_REQUEST	This command cancels the effect of a TPM lockout due to a number of successive authorization failures.
class	TPM2_DictionaryAttackParameters_REQUEST	This command changes the lockout parameters.
class	TPM2_Duplicate_REQUEST	This command duplicates a loaded object so that it may be used in a different hierarchy.
class	TPM2_EC_Ephemeral_REQUEST	TPM2_EC_Ephemeral() creates an ephemeral key for use in a two-phase key exchange protocol.
class	TPM2_ECC_Decrypt_REQUEST	This command performs ECC decryption.
class	TPM2_ECC_Encrypt_REQUEST	This command performs ECC encryption as described in Part 1, Annex D.
class	TPM2_ECC_Parameters_REQUEST	This command returns the parameters of an ECC curve identified by its TCG-assigned curveID.
class	TPM2_ECDH_KeyGen_REQUEST	This command uses the TPM to generate an ephemeral key pair (de, Qe where Qe [de]G).
class	TPM2_ECDH_ZGen_REQUEST	This command uses the TPM to recover the Z value from a public point (QB) and a private key (ds).
class	TPM2_EncryptDecrypt_REQUEST	NOTE 1 This command is deprecated, and TPM2_EncryptDecrypt2() is preferred.
class	TPM2_EncryptDecrypt2_REQUEST	This command is identical to TPM2_EncryptDecrypt(), except that the inData parameter is the first parameter.
class	TPM2_EventSequenceComplete_REQUEST	This command adds the last part of data, if any, to an Event Sequence and returns the result in a digest list.
class	TPM2_EvictControl_REQUEST	This command allows certain Transient Objects to be made persistent or a persistent object to be evicted.
class	TPM2_FieldUpgradeData_REQUEST	This command will take the actual field upgrade image to be installed on the TPM.
class	TPM2_FieldUpgradeStart_REQUEST	This command uses platformPolicy and a TPM Vendor Authorization Key to authorize a Field Upgrade Manifest.
class	TPM2_FirmwareRead_REQUEST	This command is used to read a copy of the current firmware installed in the TPM.
class	TPM2_FlushContext_REQUEST	This command causes all context associated with a loaded object, sequence object, or session to be removed from TPM memory.
class	TPM2_GetCapability_REQUEST	This command returns various information regarding the TPM and its current state.
class	TPM2_GetCommandAuditDigest_REQUEST	This command returns the current value of the command audit digest, a digest of the commands being audited, and the audit hash algorithm.
class	TPM2_GetRandom_REQUEST	This command returns the next bytesRequested octets from the random number generator (RNG).
class	TPM2_GetSessionAuditDigest_REQUEST	This command returns a digital signature of the audit session digest.
class	TPM2_GetTestResult_REQUEST	This command returns manufacturer-specific information regarding the results of a self-test and an indication of the test status.
class	TPM2_GetTime_REQUEST	This command returns the current values of Time and Clock.
class	TPM2_Hash_REQUEST	This command performs a hash operation on a data buffer and returns the results.
class	TPM2_HashSequenceStart_REQUEST	This command starts a hash or an Event Sequence.
class	TPM2_HierarchyChangeAuth_REQUEST	This command allows the authorization secret for a hierarchy or lockout to be changed using the current authorization value as the command authorization.
class	TPM2_HierarchyControl_REQUEST	This command enables and disables use of a hierarchy and its associated NV storage.
class	TPM2_HMAC_REQUEST	This command performs an HMAC on the supplied data using the indicated hash algorithm.
class	TPM2_HMAC_Start_REQUEST	This command starts an HMAC sequence.
class	TPM2_Import_REQUEST	This command allows an object to be encrypted using the symmetric encryption values of a Storage Key.
class	TPM2_IncrementalSelfTest_REQUEST	This command causes the TPM to perform a test of the selected algorithms.
class	TPM2_Load_REQUEST	This command is used to load objects into the TPM.
class	TPM2_LoadExternal_REQUEST	This command is used to load an object that is not a Protected Object into the TPM.
class	TPM2_MAC_REQUEST	This command performs an HMAC or a block cipher MAC on the supplied data using the indicated algorithm.
class	TPM2_MAC_Start_REQUEST	This command starts a MAC sequence.
class	TPM2_MakeCredential_REQUEST	This command allows the TPM to perform the actions required of a Certificate Authority (CA) in creating a TPM2B_ID_OBJECT containing an activation credential.
class	TPM2_NV_Certify_REQUEST	The purpose of this command is to certify the contents of an NV Index or portion of an NV Index.
class	TPM2_NV_ChangeAuth_REQUEST	This command allows the authorization secret for an NV Index to be changed.
class	TPM2_NV_DefineSpace_REQUEST	This command defines the attributes of an NV Index and causes the TPM to reserve space to hold the data associated with the NV Index.
class	TPM2_NV_Extend_REQUEST	This command extends a value to an area in NV memory that was previously defined by TPM2_NV_DefineSpace.
class	TPM2_NV_GlobalWriteLock_REQUEST	The command will SET TPMA_NV_WRITELOCKED for all indexes that have their TPMA_NV_GLOBALLOCK attribute SET.
class	TPM2_NV_Increment_REQUEST	This command is used to increment the value in an NV Index that has the TPM_NT_COUNTER attribute.
class	TPM2_NV_Read_REQUEST	This command reads a value from an area in NV memory previously defined by TPM2_NV_DefineSpace().
class	TPM2_NV_ReadLock_REQUEST	If TPMA_NV_READ_STCLEAR is SET in an Index, then this command may be used to prevent further reads of the NV Index until the next TPM2_Startup (TPM_SU_CLEAR).
class	TPM2_NV_ReadPublic_REQUEST	This command is used to read the public area and Name of an NV Index.
class	TPM2_NV_SetBits_REQUEST	This command is used to SET bits in an NV Index that was created as a bit field.
class	TPM2_NV_UndefineSpace_REQUEST	This command removes an Index from the TPM.
class	TPM2_NV_UndefineSpaceSpecial_REQUEST	This command allows removal of a platform-created NV Index that has TPMA_NV_POLICY_DELETE SET.
class	TPM2_NV_Write_REQUEST	This command writes a value to an area in NV memory that was previously defined by TPM2_NV_DefineSpace().
class	TPM2_NV_WriteLock_REQUEST	If the TPMA_NV_WRITEDEFINE or TPMA_NV_WRITE_STCLEAR attributes of an NV location are SET, then this command may be used to inhibit further writes of the NV Index.
class	TPM2_ObjectChangeAuth_REQUEST	This command is used to change the authorization secret for a TPM-resident object.
class	TPM2_PCR_Allocate_REQUEST	This command is used to set the desired PCR allocation of PCR and algorithms.
class	TPM2_PCR_Event_REQUEST	This command is used to cause an update to the indicated PCR.
class	TPM2_PCR_Extend_REQUEST	This command is used to cause an update to the indicated PCR.
class	TPM2_PCR_Read_REQUEST	This command returns the values of all PCR specified in pcrSelectionIn.
class	TPM2_PCR_Reset_REQUEST	If the attribute of a PCR allows the PCR to be reset and proper authorization is provided, then this command may be used to set the PCR in all banks to zero.
class	TPM2_PCR_SetAuthPolicy_REQUEST	This command is used to associate a policy with a PCR or group of PCR.
class	TPM2_PCR_SetAuthValue_REQUEST	This command changes the authValue of a PCR or group of PCR.
class	TPM2_Policy_AC_SendSelect_REQUEST	This command allows qualification of the sending (copying) of an Object to an Attached Component (AC).
class	TPM2_PolicyAuthorize_REQUEST	This command allows policies to change.
class	TPM2_PolicyAuthorizeNV_REQUEST	This command provides a capability that is the equivalent of a revocable policy.
class	TPM2_PolicyAuthValue_REQUEST	This command allows a policy to be bound to the authorization value of the authorized entity.
class	TPM2_PolicyCommandCode_REQUEST	This command indicates that the authorization will be limited to a specific command code.
class	TPM2_PolicyCounterTimer_REQUEST	This command is used to cause conditional gating of a policy based on the contents of the TPMS_TIME_INFO structure.
class	TPM2_PolicyCpHash_REQUEST	This command is used to allow a policy to be bound to a specific command and command parameters.
class	TPM2_PolicyDuplicationSelect_REQUEST	This command allows qualification of duplication to allow duplication to a selected new parent.
class	TPM2_PolicyGetDigest_REQUEST	This command returns the current policyDigest of the session.
class	TPM2_PolicyLocality_REQUEST	This command indicates that the authorization will be limited to a specific locality.
class	TPM2_PolicyNameHash_REQUEST	This command allows a policy to be bound to a specific set of TPM entities without being bound to the parameters of the command.
class	TPM2_PolicyNV_REQUEST	This command is used to cause conditional gating of a policy based on the contents of an NV Index.
class	TPM2_PolicyNvWritten_REQUEST	This command allows a policy to be bound to the TPMA_NV_WRITTEN attributes.
class	TPM2_PolicyOR_REQUEST	This command allows options in authorizations without requiring that the TPM evaluate all of the options.
class	TPM2_PolicyPassword_REQUEST	This command allows a policy to be bound to the authorization value of the authorized object.
class	TPM2_PolicyPCR_REQUEST	This command is used to cause conditional gating of a policy based on PCR.
class	TPM2_PolicyPhysicalPresence_REQUEST	This command indicates that physical presence will need to be asserted at the time the authorization is performed.
class	TPM2_PolicyRestart_REQUEST	This command allows a policy authorization session to be returned to its initial state.
class	TPM2_PolicySecret_REQUEST	This command includes a secret-based authorization to a policy.
class	TPM2_PolicySigned_REQUEST	This command includes a signed authorization in a policy.
class	TPM2_PolicyTemplate_REQUEST	This command allows a policy to be bound to a specific creation template.
class	TPM2_PolicyTicket_REQUEST	This command is similar to TPM2_PolicySigned() except that it takes a ticket instead of a signed authorization.
class	TPM2_PP_Commands_REQUEST	This command is used to determine which commands require assertion of Physical Presence (PP) in addition to platformAuth/platformPolicy.
class	TPM2_Quote_REQUEST	This command is used to quote PCR values.
class	TPM2_ReadClock_REQUEST	This command reads the current TPMS_TIME_INFO structure that contains the current setting of Time, Clock, resetCount, and restartCount.
class	TPM2_ReadPublic_REQUEST	This command allows access to the public area of a loaded object.
class	TPM2_Rewrap_REQUEST	This command allows the TPM to serve in the role as a Duplication Authority.
class	TPM2_RSA_Decrypt_REQUEST	This command performs RSA decryption using the indicated padding scheme according to IETF RFC 8017 ((PKCS#1).
class	TPM2_RSA_Encrypt_REQUEST	This command performs RSA encryption using the indicated padding scheme according to IETF RFC 8017.
class	TPM2_SelfTest_REQUEST	This command causes the TPM to perform a test of its capabilities.
class	TPM2_SequenceComplete_REQUEST	This command adds the last part of data, if any, to a hash/HMAC sequence and returns the result.
class	TPM2_SequenceUpdate_REQUEST	This command is used to add data to a hash or HMAC sequence.
class	TPM2_SetAlgorithmSet_REQUEST	This command allows the platform to change the set of algorithms that are used by the TPM.
class	TPM2_SetCommandCodeAuditStatus_REQUEST	This command may be used by the Privacy Administrator or platform to change the audit status of a command or to set the hash algorithm used for the audit digest, but not both at the same time.
class	TPM2_SetPrimaryPolicy_REQUEST	This command allows setting of the authorization policy for the lockout (lockoutPolicy), the platform hierarchy (platformPolicy), the storage hierarchy (ownerPolicy), and the endorsement hierarchy (endorsementPolicy).
class	TPM2_Shutdown_REQUEST	This command is used to prepare the TPM for a power cycle.
class	TPM2_Sign_REQUEST	This command causes the TPM to sign an externally provided hash with the specified symmetric or asymmetric signing key.
class	TPM2_StartAuthSession_REQUEST	This command is used to start an authorization session using alternative methods of establishing the session key (sessionKey).
class	TPM2_Startup_REQUEST	TPM2_Startup() is always preceded by _TPM_Init, which is the physical indication that TPM initialization is necessary because of a system-wide reset.
class	TPM2_StirRandom_REQUEST	This command is used to add "additional information" to the RNG state.
class	TPM2_TestParms_REQUEST	This command is used to check to see if specific combinations of algorithm parameters are supported.
class	TPM2_Unseal_REQUEST	This command returns the data in a loaded Sealed Data Object.
class	TPM2_Vendor_TCG_Test_REQUEST	This is a placeholder to allow testing of the dispatch code.
class	TPM2_VerifySignature_REQUEST	This command uses loaded keys to validate a signature on a message with the message digest passed to the TPM.
class	TPM2_ZGen_2Phase_REQUEST	This command supports two-phase key exchange protocols.
class	UnsealResponse	This command returns the data in a loaded Sealed Data Object.
class	Vendor_TCG_TestResponse	This is a placeholder to allow testing of the dispatch code.
class	VerifySignatureResponse	This command uses loaded keys to validate a signature on a message with the message digest passed to the TPM.
class	ZGen_2PhaseResponse	This command supports two-phase key exchange protocols.