the local time, not null
the zone offset, not null
Adjusts the specified temporal object to have the same offset and time as this object.
Adjusts the specified temporal object to have the same offset and time as this object.
This returns a temporal object of the same observable type as the input with the offset and time changed to be the same as this.
The adjustment is equivalent to using long)
twice, passing ChronoField#NANO_OF_DAY
and
ChronoField#OFFSET_SECONDS
as the fields.
In most cases, it is clearer to reverse the calling pattern by using
Temporal#with(TemporalAdjuster)
:
// these two lines are equivalent, but the second approach is recommended temporal = thisOffsetTime.adjustInto(temporal); temporal = temporal.with(thisOffsetTime);
This instance is immutable and unaffected by this method call.
the target object to be adjusted, not null
the adjusted object, not null
ArithmeticException
if numeric overflow occurs
DateTimeException
if unable to make the adjustment
Combines this time with a date to create an OffsetDateTime
.
Combines this time with a date to create an OffsetDateTime
.
This returns an OffsetDateTime
formed from this time and the specified date.
All possible combinations of date and time are valid.
the date to combine with, not null
the offset date-time formed from this time and the specified date, not null
Compares this OffsetTime
to another time.
Compares this OffsetTime
to another time.
The comparison is based first on the UTC equivalent instant, then on the local time.
It is "consistent with equals", as defined by Comparable
.
For example, the following is the comparator order:
10:30+01:00
11:00+01:00
12:00+02:00
11:30+01:00
12:00+01:00
12:30+01:00
Values #2 and #3 represent the same instant on the time-line.
When two values represent the same instant, the local time is compared
to distinguish them. This step is needed to make the ordering
consistent with equals()
.
To compare the underlying local time of two TemporalAccessor
instances,
use ChronoField#NANO_OF_DAY
as a comparator.
the other time to compare to, not null
the comparator value, negative if less, positive if greater
NullPointerException
if { @code other} is null
Checks if this time is equal to another time.
Checks if this time is equal to another time.
The comparison is based on the local-time and the offset.
To compare for the same instant on the time-line, use #isEqual(OffsetTime)
.
Only objects of type OffsetTime
are compared, other types return false.
To compare the underlying local time of two TemporalAccessor
instances,
use ChronoField#NANO_OF_DAY
as a comparator.
the object to check, null returns false
true if this is equal to the other time
Outputs this time as a String
using the formatter.
Outputs this time as a String
using the formatter.
This time will be passed to the formatter
print method
.
the formatter to use, not null
the formatted time string, not null
DateTimeException
if an error occurs during printing
Gets the value of the specified field from this time as an int
.
Gets the value of the specified field from this time as an int
.
This queries this time for the value for the specified field. The returned value will always be within the valid range of values for the field. If it is not possible to return the value, because the field is not supported or for some other reason, an exception is thrown.
If the field is a ChronoField
then the query is implemented here.
The supported fields
will return valid
values based on this time, except NANO_OF_DAY
and MICRO_OF_DAY
which are too large to fit in an int
and throw a DateTimeException
.
All other ChronoField
instances will throw a DateTimeException
.
If the field is not a ChronoField
, then the result of this method
is obtained by invoking TemporalField.getFrom(TemporalAccessor)
passing this
as the argument. Whether the value can be obtained,
and what the value represents, is determined by the field.
the field to get, not null
the value for the field
ArithmeticException
if numeric overflow occurs
DateTimeException
if a value for the field cannot be obtained
Gets the hour-of-day field.
Gets the hour-of-day field.
the hour-of-day, from 0 to 23
Gets the value of the specified field from this time as a long
.
Gets the value of the specified field from this time as a long
.
This queries this time for the value for the specified field. If it is not possible to return the value, because the field is not supported or for some other reason, an exception is thrown.
If the field is a ChronoField
then the query is implemented here.
The supported fields
will return valid
values based on this time.
All other ChronoField
instances will throw a DateTimeException
.
If the field is not a ChronoField
, then the result of this method
is obtained by invoking TemporalField.getFrom(TemporalAccessor)
passing this
as the argument. Whether the value can be obtained,
and what the value represents, is determined by the field.
the field to get, not null
the value for the field
ArithmeticException
if numeric overflow occurs
DateTimeException
if a value for the field cannot be obtained
Gets the minute-of-hour field.
Gets the minute-of-hour field.
the minute-of-hour, from 0 to 59
Gets the nano-of-second field.
Gets the nano-of-second field.
the nano-of-second, from 0 to 999,999,999
Gets the zone offset, such as '+01:00'.
Gets the zone offset, such as '+01:00'.
This is the offset of the local time from UTC/Greenwich.
the zone offset, not null
Gets the second-of-minute field.
Gets the second-of-minute field.
the second-of-minute, from 0 to 59
A hash code for this time.
Checks if the instant of this OffsetTime
is after that of the
specified time applying both times to a common date.
Checks if the instant of this OffsetTime
is after that of the
specified time applying both times to a common date.
This method differs from the comparison in #compareTo
in that it
only compares the instant of the time. This is equivalent to converting both
times to an instant using the same date and comparing the instants.
the other time to compare to, not null
true if this is after the instant of the specified time
Checks if the instant of this OffsetTime
is before that of the
specified time applying both times to a common date.
Checks if the instant of this OffsetTime
is before that of the
specified time applying both times to a common date.
This method differs from the comparison in #compareTo
in that it
only compares the instant of the time. This is equivalent to converting both
times to an instant using the same date and comparing the instants.
the other time to compare to, not null
true if this is before the instant of the specified time
Checks if the instant of this OffsetTime
is equal to that of the
specified time applying both times to a common date.
Checks if the instant of this OffsetTime
is equal to that of the
specified time applying both times to a common date.
This method differs from the comparison in #compareTo
and #equals
in that it only compares the instant of the time. This is equivalent to converting both
times to an instant using the same date and comparing the instants.
the other time to compare to, not null
true if this is equal to the instant of the specified time
Checks if the specified unit is supported.
Checks if the specified unit is supported.
This checks if the date-time can be queried for the specified unit.
If false, then calling the plus
and minus
methods will throw an exception.
Implementations must check and handle all fields defined in ChronoUnit
.
If the field is supported, then true is returned, otherwise false
If the field is not a ChronoUnit
, then the result of this method
is obtained by invoking TemporalUnit.isSupportedBy(Temporal)
passing this
as the argument.
Implementations must not alter this object.
the unit to check, null returns false
true if this date-time can be queried for the unit, false if not
Checks if the specified field is supported.
Checks if the specified field is supported.
This checks if this time can be queried for the specified field.
If false, then calling the range
and
get
methods will throw an exception.
If the field is a ChronoField
then the query is implemented here.
The supported fields are:
NANO_OF_SECOND
NANO_OF_DAY
MICRO_OF_SECOND
MICRO_OF_DAY
MILLI_OF_SECOND
MILLI_OF_DAY
SECOND_OF_MINUTE
SECOND_OF_DAY
MINUTE_OF_HOUR
MINUTE_OF_DAY
HOUR_OF_AMPM
CLOCK_HOUR_OF_AMPM
HOUR_OF_DAY
CLOCK_HOUR_OF_DAY
AMPM_OF_DAY
OFFSET_SECONDS
All other ChronoField
instances will return false.
If the field is not a ChronoField
, then the result of this method
is obtained by invoking TemporalField.isSupportedBy(TemporalAccessor)
passing this
as the argument.
Whether the field is supported is determined by the field.
the field to check, null returns false
true if the field is supported on this time, false if not
Returns a copy of this time with the specified period subtracted.
Returns a copy of this time with the specified period subtracted.
This method returns a new time based on this time with the specified period subtracted. This can be used to subtract any period that is defined by a unit, for example to subtract hours, minutes or seconds. The unit is responsible for the details of the calculation, including the resolution of any edge cases in the calculation. The offset is not part of the calculation and will be unchanged in the result.
This instance is immutable and unaffected by this method call.
the amount of the unit to subtract from the result, may be negative
the unit of the period to subtract, not null
an { @code OffsetTime} based on this time with the specified period subtracted, not null
DateTimeException
if the unit cannot be added to this type
Returns a copy of this time with the specified period subtracted.
Returns a copy of this time with the specified period subtracted.
This method returns a new time based on this time with the specified period subtracted.
The amount is typically Period
but may be any other type implementing
the TemporalAmount
interface.
The calculation is delegated to the specified adjuster, which typically calls
back to TemporalUnit)
.
The offset is not part of the calculation and will be unchanged in the result.
This instance is immutable and unaffected by this method call.
the amount to subtract, not null
an { @code OffsetTime} based on this time with the subtraction made, not null
ArithmeticException
if numeric overflow occurs
DateTimeException
if the subtraction cannot be made
Returns a copy of this OffsetTime
with the specified period in hours subtracted.
Returns a copy of this OffsetTime
with the specified period in hours subtracted.
This subtracts the specified number of hours from this time, returning a new time. The calculation wraps around midnight.
This instance is immutable and unaffected by this method call.
the hours to subtract, may be negative
an { @code OffsetTime} based on this time with the hours subtracted, not null
Returns a copy of this OffsetTime
with the specified period in minutes subtracted.
Returns a copy of this OffsetTime
with the specified period in minutes subtracted.
This subtracts the specified number of minutes from this time, returning a new time. The calculation wraps around midnight.
This instance is immutable and unaffected by this method call.
the minutes to subtract, may be negative
an { @code OffsetTime} based on this time with the minutes subtracted, not null
Returns a copy of this OffsetTime
with the specified period in nanoseconds subtracted.
Returns a copy of this OffsetTime
with the specified period in nanoseconds subtracted.
This subtracts the specified number of nanoseconds from this time, returning a new time. The calculation wraps around midnight.
This instance is immutable and unaffected by this method call.
the nanos to subtract, may be negative
an { @code OffsetTime} based on this time with the nanoseconds subtracted, not null
Returns a copy of this OffsetTime
with the specified period in seconds subtracted.
Returns a copy of this OffsetTime
with the specified period in seconds subtracted.
This subtracts the specified number of seconds from this time, returning a new time. The calculation wraps around midnight.
This instance is immutable and unaffected by this method call.
the seconds to subtract, may be negative
an { @code OffsetTime} based on this time with the seconds subtracted, not null
Returns a copy of this time with the specified period added.
Returns a copy of this time with the specified period added.
This method returns a new time based on this time with the specified period added. This can be used to add any period that is defined by a unit, for example to add hours, minutes or seconds. The unit is responsible for the details of the calculation, including the resolution of any edge cases in the calculation. The offset is not part of the calculation and will be unchanged in the result.
This instance is immutable and unaffected by this method call.
the amount of the unit to add to the result, may be negative
the unit of the period to add, not null
an { @code OffsetTime} based on this time with the specified period added, not null
DateTimeException
if the unit cannot be added to this type
Returns a copy of this date with the specified period added.
Returns a copy of this date with the specified period added.
This method returns a new time based on this time with the specified period added.
The amount is typically Period
but may be any other type implementing
the TemporalAmount
interface.
The calculation is delegated to the specified adjuster, which typically calls
back to TemporalUnit)
.
The offset is not part of the calculation and will be unchanged in the result.
This instance is immutable and unaffected by this method call.
the amount to add, not null
an { @code OffsetTime} based on this time with the addition made, not null
ArithmeticException
if numeric overflow occurs
DateTimeException
if the addition cannot be made
Returns a copy of this OffsetTime
with the specified period in hours added.
Returns a copy of this OffsetTime
with the specified period in hours added.
This adds the specified number of hours to this time, returning a new time. The calculation wraps around midnight.
This instance is immutable and unaffected by this method call.
the hours to add, may be negative
an { @code OffsetTime} based on this time with the hours added, not null
Returns a copy of this OffsetTime
with the specified period in minutes added.
Returns a copy of this OffsetTime
with the specified period in minutes added.
This adds the specified number of minutes to this time, returning a new time. The calculation wraps around midnight.
This instance is immutable and unaffected by this method call.
the minutes to add, may be negative
an { @code OffsetTime} based on this time with the minutes added, not null
Returns a copy of this OffsetTime
with the specified period in nanoseconds added.
Returns a copy of this OffsetTime
with the specified period in nanoseconds added.
This adds the specified number of nanoseconds to this time, returning a new time. The calculation wraps around midnight.
This instance is immutable and unaffected by this method call.
the nanos to add, may be negative
an { @code OffsetTime} based on this time with the nanoseconds added, not null
Returns a copy of this OffsetTime
with the specified period in seconds added.
Returns a copy of this OffsetTime
with the specified period in seconds added.
This adds the specified number of seconds to this time, returning a new time. The calculation wraps around midnight.
This instance is immutable and unaffected by this method call.
the seconds to add, may be negative
an { @code OffsetTime} based on this time with the seconds added, not null
Queries this time using the specified query.
Queries this time using the specified query.
This queries this time using the specified query strategy object.
The TemporalQuery
object defines the logic to be used to
obtain the result. Read the documentation of the query to understand
what the result of this method will be.
The result of this method is obtained by invoking the
TemporalQuery#queryFrom(TemporalAccessor)
method on the
specified query passing this
as the argument.
the type of the result
the query to invoke, not null
the query result, null may be returned (defined by the query)
ArithmeticException
if numeric overflow occurs (defined by the query)
DateTimeException
if unable to query (defined by the query)
Gets the range of valid values for the specified field.
Gets the range of valid values for the specified field.
The range object expresses the minimum and maximum valid values for a field. This time is used to enhance the accuracy of the returned range. If it is not possible to return the range, because the field is not supported or for some other reason, an exception is thrown.
If the field is a ChronoField
then the query is implemented here.
The supported fields
will return
appropriate range instances.
All other ChronoField
instances will throw a DateTimeException
.
If the field is not a ChronoField
, then the result of this method
is obtained by invoking TemporalField.rangeRefinedBy(TemporalAccessor)
passing this
as the argument.
Whether the range can be obtained is determined by the field.
the field to query the range for, not null
the range of valid values for the field, not null
DateTimeException
if the range for the field cannot be obtained
Gets the LocalTime
part of this date-time.
Gets the LocalTime
part of this date-time.
This returns a LocalTime
with the same hour, minute, second and
nanosecond as this date-time.
the time part of this date-time, not null
Outputs this time as a String
, such as 10:15:30+01:00
.
Outputs this time as a String
, such as 10:15:30+01:00
.
The output will be one of the following ISO-8601 formats:
HH:mmXXXXX
HH:mm:ssXXXXX
HH:mm:ss.SSSXXXXX
HH:mm:ss.SSSSSSXXXXX
HH:mm:ss.SSSSSSSSSXXXXX
The format used will be the shortest that outputs the full value of the time where the omitted parts are implied to be zero.
a string representation of this time, not null
Returns a copy of this OffsetTime
with the time truncated.
Returns a copy of this OffsetTime
with the time truncated.
Truncation returns a copy of the original time with fields
smaller than the specified unit set to zero.
For example, truncating with the minutes
unit
will set the second-of-minute and nano-of-second field to zero.
The unit must have a duration
that divides into the length of a standard day without remainder.
This includes all supplied time units on ChronoUnit
and
DAYS
. Other units throw an exception.
The offset does not affect the calculation and will be the same in the result.
This instance is immutable and unaffected by this method call.
the unit to truncate to, not null
an { @code OffsetTime} based on this time with the time truncated, not null
DateTimeException
if unable to truncate
Calculates the period between this time and another time in terms of the specified unit.
Calculates the period between this time and another time in terms of the specified unit.
This calculates the period between two times in terms of a single unit.
The start and end points are this
and the specified time.
The result will be negative if the end is before the start.
For example, the period in hours between two times can be calculated
using startTime.until(endTime, HOURS)
.
The Temporal
passed to this method must be an OffsetTime
.
If the offset differs between the two times, then the specified
end time is normalized to have the same offset as this time.
The calculation returns a whole number, representing the number of complete units between the two times. For example, the period in hours between 11:30Z and 13:29Z will only be one hour as it is one minute short of two hours.
This method operates in association with TemporalUnit#between
.
The result of this method is a long
representing the amount of
the specified unit. By contrast, the result of between
is an
object that can be used directly in addition/subtraction:
long period = start.until(end, HOURS); // this method dateTime.plus(HOURS.between(start, end)); // use in plus/minus
The calculation is implemented in this method for ChronoUnit
.
The units NANOS
, MICROS
, MILLIS
, SECONDS
,
MINUTES
, HOURS
and HALF_DAYS
are supported.
Other ChronoUnit
values will throw an exception.
If the unit is not a ChronoUnit
, then the result of this method
is obtained by invoking TemporalUnit.between(Temporal, Temporal)
passing this
as the first argument and the input temporal as
the second argument.
This instance is immutable and unaffected by this method call.
the end time, which is converted to an { @code OffsetTime}, not null
the unit to measure the period in, not null
the amount of the period between this time and the end time
ArithmeticException
if numeric overflow occurs
DateTimeException
if the period cannot be calculated
Returns a copy of this time with the specified field set to a new value.
Returns a copy of this time with the specified field set to a new value.
This returns a new OffsetTime
, based on this one, with the value
for the specified field changed.
This can be used to change any supported field, such as the hour, minute or second.
If it is not possible to set the value, because the field is not supported or for
some other reason, an exception is thrown.
If the field is a ChronoField
then the adjustment is implemented here.
The OFFSET_SECONDS
field will return a time with the specified offset.
The local time is unaltered. If the new offset value is outside the valid range
then a DateTimeException
will be thrown.
The other supported fields
will behave as per
the matching method on long)
LocalTime}.
In this case, the offset is not part of the calculation and will be unchanged.
All other ChronoField
instances will throw a DateTimeException
.
If the field is not a ChronoField
, then the result of this method
is obtained by invoking TemporalField.adjustInto(Temporal, long)
passing this
as the argument. In this case, the field determines
whether and how to adjust the instant.
This instance is immutable and unaffected by this method call.
the field to set in the result, not null
the new value of the field in the result
an { @code OffsetTime} based on { @code this} with the specified field set, not null
ArithmeticException
if numeric overflow occurs
DateTimeException
if the field cannot be set
Returns an adjusted copy of this time.
Returns an adjusted copy of this time.
This returns a new OffsetTime
, based on this one, with the time adjusted.
The adjustment takes place using the specified adjuster strategy object.
Read the documentation of the adjuster to understand what adjustment will be made.
A simple adjuster might simply set the one of the fields, such as the hour field. A more complex adjuster might set the time to the last hour of the day.
The classes LocalTime
and ZoneOffset
implement TemporalAdjuster
,
thus this method can be used to change the time or offset:
result = offsetTime.with(time); result = offsetTime.with(offset);
The result of this method is obtained by invoking the
TemporalAdjuster#adjustInto(Temporal)
method on the
specified adjuster passing this
as the argument.
This instance is immutable and unaffected by this method call.
the adjuster to use, not null
an { @code OffsetTime} based on { @code this} with the adjustment made, not null
ArithmeticException
if numeric overflow occurs
DateTimeException
if the adjustment cannot be made
Returns a copy of this OffsetTime
with the hour-of-day value altered.
Returns a copy of this OffsetTime
with the hour-of-day value altered.
The offset does not affect the calculation and will be the same in the result.
This instance is immutable and unaffected by this method call.
the hour-of-day to set in the result, from 0 to 23
an { @code OffsetTime} based on this time with the requested hour, not null
DateTimeException
if the hour value is invalid
Returns a copy of this OffsetTime
with the minute-of-hour value altered.
Returns a copy of this OffsetTime
with the minute-of-hour value altered.
The offset does not affect the calculation and will be the same in the result.
This instance is immutable and unaffected by this method call.
the minute-of-hour to set in the result, from 0 to 59
an { @code OffsetTime} based on this time with the requested minute, not null
DateTimeException
if the minute value is invalid
Returns a copy of this OffsetTime
with the nano-of-second value altered.
Returns a copy of this OffsetTime
with the nano-of-second value altered.
The offset does not affect the calculation and will be the same in the result.
This instance is immutable and unaffected by this method call.
the nano-of-second to set in the result, from 0 to 999,999,999
an { @code OffsetTime} based on this time with the requested nanosecond, not null
DateTimeException
if the nanos value is invalid
Returns a copy of this OffsetTime
with the specified offset ensuring
that the result is at the same instant on an implied day.
Returns a copy of this OffsetTime
with the specified offset ensuring
that the result is at the same instant on an implied day.
This method returns an object with the specified ZoneOffset
and a LocalTime
adjusted by the difference between the two offsets.
This will result in the old and new objects representing the same instant an an implied day.
This is useful for finding the local time in a different offset.
For example, if this time represents 10:30+02:00
and the offset specified is
+03:00
, then this method will return 11:30+03:00
.
To change the offset without adjusting the local time use #withOffsetSameLocal
.
This instance is immutable and unaffected by this method call.
the zone offset to change to, not null
an { @code OffsetTime} based on this time with the requested offset, not null
Returns a copy of this OffsetTime
with the specified offset ensuring
that the result has the same local time.
Returns a copy of this OffsetTime
with the specified offset ensuring
that the result has the same local time.
This method returns an object with the same LocalTime
and the specified ZoneOffset
.
No calculation is needed or performed.
For example, if this time represents 10:30+02:00
and the offset specified is
+03:00
, then this method will return 10:30+03:00
.
To take into account the difference between the offsets, and adjust the time fields,
use #withOffsetSameInstant
.
This instance is immutable and unaffected by this method call.
the zone offset to change to, not null
an { @code OffsetTime} based on this time with the requested offset, not null
Returns a copy of this OffsetTime
with the second-of-minute value altered.
Returns a copy of this OffsetTime
with the second-of-minute value altered.
The offset does not affect the calculation and will be the same in the result.
This instance is immutable and unaffected by this method call.
the second-of-minute to set in the result, from 0 to 59
an { @code OffsetTime} based on this time with the requested second, not null
DateTimeException
if the second value is invalid
A time with an offset from UTC/Greenwich in the ISO-8601 calendar system, such as
10:15:30+01:00
.OffsetTime
is an immutable date-time object that represents a time, often viewed as hour-minute-second-offset. This class stores all time fields, to a precision of nanoseconds, as well as a zone offset. For example, the value "13:45.30.123456789+02:00" can be stored in anOffsetTime
.Specification for implementors
This class is immutable and thread-safe.