io.udash.wrappers.highcharts.config.series.pie
SeriesPie
Related Docs:
object SeriesPie
| package pie
io.udash.wrappers.highcharts.config.series.pie
Allow this series' points to be selected by clicking on the markers, bars or pie slices.
Allow this series' points to be selected by clicking on the markers, bars or pie slices.
Enable or disable the initial animation when a series is displayed.
Enable or disable the initial animation when a series is displayed. The animation can also be set as a configuration object. Please note that this option only applies to the initial animation of the series itself. For other animations, see chart.animation and the animation parameter under the API methods. The following properties are supported: <dl> <dt>duration</dt>
Math object. See the easing demo.Due to poor performance, animation is disabled in old IE browsers for column charts and polar charts.
For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high.
For some series, there is a limit that shuts down initial animation by default when the total number of points
in the chart is too high. For example, for a column chart and its derivatives, animation doesn't run if there
is more than 250 points totally. To disable this cap, set animationLimit to Infinity.
The color of the border surrounding each slice.
The color of the border surrounding each slice. When null, the border takes the same color as the slice fill.
This can be used together with a borderWidth to fill drawing gaps created by antialiazing artefacts in borderless pies.
The width of the border surrounding each slice.
The width of the border surrounding each slice.
When setting the border width to 0, there may be small gaps between the slices due to SVG antialiasing artefacts.
To work around this, keep the border width at 0.5 or 1, but set the borderColor to null instead.
The center of the series.
The center of the series. By default, it is centered in the middle of the plot area, so it fills the plot area height.
A class name to apply to the series' graphical elements.
A class name to apply to the series' graphical elements.
The main color or the series.
The main color or the series. In line type series it applies to the line and the point markers unless otherwise
specified. In bar type series it applies to the bars unless a color is specified per point. The default value is
pulled from the options.colors array.
A series specific or series type specific color set to use instead of the global colors.
A series specific or series type specific color set to use instead of the global colors.
You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.
You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.
Pointer cursor on line graph, on columns, on scatter markers
An array of data points for the series.
An array of data points for the series. For the area series type, points can be given in the following ways:
y options. The x values will be automatically calculated,
either starting at 0 and incremented by 1, or from pointStart
and pointInterval given in the series options. If the axis
has categories, these will be used. Example:
data: [0, 5, 3, 5]
-
An array of arrays with 2 values. In this case, the values correspond to x,y. If the first value is a string, it is
applied as the name of the point, and the x value is inferred.
data: [ [0, 9], [1, 7], [2, 6] ]
-
An array of objects with named values. The objects are point configuration objects as seen below. If the total number of data points exceeds the series' turboThreshold, this option is not available.
data: [{
x: 1,
y: 9,
name: "Point2",
color: "#00FF00"
}, {
x: 1,
y: 6,
name: "Point1",
color: "#FF00FF"
}]
The demos use a line series, but the principle is the same for all types.
Options for the series data labels, appearing next to each data point.
Options for the series data labels, appearing next to each data point.
In styled mode, the data labels can be styled wtih the .highcharts-data-label-box and .highcharts-data-label class names (see example).
The thickness of a 3D pie.
The thickness of a 3D pie. Requires highcharts-3d.js
Requires Accessibility module
Requires Accessibility module
A description of the series to add to the screen reader information about the series.
Enable or disable the mouse tracking for a specific series.
Enable or disable the mouse tracking for a specific series. This includes point tooltips and click events on graphs and points. For large datasets it improves performance.
The end angle of the pie in degrees where 0 is top and 90 is right.
The end angle of the pie in degrees where 0 is top and 90 is right. Defaults to startAngle plus 360.
Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis.
Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis. By default, the Y axis adjusts to the min and max of the visible data. Cartesian series only.
An id for the series.
An id for the series. This can be used after render time to get a pointer to the series object through chart.get().
Equivalent to chart.ignoreHiddenSeries, this option tells whether the series shall be redrawn as if the hidden point were null.
Equivalent to chart.ignoreHiddenSeries, this option tells whether the series shall be redrawn as if the hidden point were null.
The default value changed from false to true with Highcharts 3.0.
The index of the series in the chart, affecting the internal index in the chart.series array,
the visible Z index as well as the order in the legend.
The index of the series in the chart, affecting the internal index in the chart.series array,
the visible Z index as well as the order in the legend.
The size of the inner diameter for the pie.
The size of the inner diameter for the pie. A size greater than 0 renders a donut chart. Can be a percentage or pixel value. Percentages are relative to the pie size. Pixel values are given as integers.
Note: in Highcharts < 4.1.2, the percentage was relative to the plot area, not the pie size.
An array specifying which option maps to which key in the data point array.
An array specifying which option maps to which key in the data point array. This makes it convenient to work with unstructured data arrays from different sources.
The sequential index of the series in the legend.
The id of another series to link to.
The id of another series to link to. Additionally, the value can be ":previous" to link to the previous series. When two series are linked, only the first one appears in the legend. Toggling the visibility of this also toggles the linked series.
The minimum size for a pie in response to auto margins.
The minimum size for a pie in response to auto margins. The pie will try to shrink to make room for data labels in side the plot area, but only to this size.
The name of the series as shown in the legend, tooltip etc.
The name of the series as shown in the legend, tooltip etc.
Properties for each single point
Properties for each single point
Whether to select the series initially.
Whether to select the series initially. If showCheckbox is true, the checkbox next to the series name will be checked for a selected series.
Whether to apply a drop shadow to the graph line.
Whether to apply a drop shadow to the graph line. Since 2.3 the shadow can be an object configuration
containing color, offsetX, offsetY, opacity and width.
If true, a checkbox is displayed next to the legend item to allow selecting the series.
If true, a checkbox is displayed next to the legend item to allow selecting the series.
The state of the checkbox is determined by the selected option.
Whether to display this particular series or series type in the legend.
Whether to display this particular series or series type in the legend. The default value
is true for standalone series, false for linked series.
The diameter of the pie relative to the plot area.
The diameter of the pie relative to the plot area. Can be a percentage or pixel value. Pixel values are given as integers. The default behaviour (as of 3.0) is to scale to the plot area and give room for data labels within the plot area. As a consequence, the size of the pie may vary when points are updated and data labels more around. In that case it is best to set a fixed value, for example "75%".
If a point is sliced, moved out from the center, how many pixels should it be moved?.
If a point is sliced, moved out from the center, how many pixels should it be moved?.
The start angle of the pie slices in degrees where 0 is top and 90 right.
The start angle of the pie slices in degrees where 0 is top and 90 right.
A wrapper object for all the series options in specific states.
A wrapper object for all the series options in specific states.
Sticky tracking of mouse events.
Sticky tracking of mouse events. When true, the mouseOut event
on a series isn't triggered until the mouse moves over another series, or out
of the plot area. When false, the mouseOut event on a series is
triggered when the mouse leaves the area around the series' graph or markers.
This also implies the tooltip. When stickyTracking is false and tooltip.shared is false, the
tooltip will be hidden when moving the mouse between series. Defaults to true for line and area type series, but to false for columns, pies etc.
A configuration object for the tooltip rendering of each single series.
Set the initial visibility of the series.
Set the initial visibility of the series.
Define the visual z index of the series.
Define the visual z index of the series.
Defines the Axis on which the zones are applied.
Defines the Axis on which the zones are applied.
An array defining zones within a series.
An array defining zones within a series. Zones can be applied to the X axis, Y axis or Z axis for bubbles,
according to the zoneAxis option.