Standard accessor task that iterates over the elements of the collection.
Used to iterate elements using indices
Performs two tasks in parallel, and waits for both to finish.
Sequentially performs one task after another.
Test two objects for inequality.
Test two objects for inequality.
true
if !(this == that), false otherwise.
Equivalent to x.hashCode
except for boxed numeric types and null
.
Equivalent to x.hashCode
except for boxed numeric types and null
.
For numerics, it returns a hash value which is consistent
with value equality: if two value type instances compare
as true, then ## will produce the same hash value for each
of them.
For null
returns a hashcode where null.hashCode
throws a
NullPointerException
.
a hash value consistent with ==
[use case]
the element type of the returned collection.
the traversable to append.
a new parallel array which contains all elements of this parallel array
followed by all elements of that
.
[use case]
the prepended element
a new parallel array
consisting of elem
followed
by all elements of this parallel array
.
Applies a binary operator to a start value and all elements of this parallel array , going left to right.
Applies a binary operator to a start value and all elements of this parallel array , going left to right.
Note: /:
is alternate syntax for foldLeft
; z /: xs
is the same as
xs foldLeft z
.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this parallel array
,
going left to right with the start value z
on the left:
op(...op(op(z, x1), x2), ..., xn)
where x_{1}, ..., x_{n}
are the elements of this parallel array
.
A syntactic sugar for out of order folding.
A syntactic sugar for out of order folding. See fold
.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a /:\ 5)(_+_) b: Int = 15
[use case]
the appended element
a new parallel array
consisting of
all elements of this parallel array
followed by elem
.
@example
scala> import scala.collection.mutable.LinkedList import scala.collection.mutable.LinkedList scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = a :+ 2 b: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> println(a) LinkedList(1)
Applies a binary operator to all elements of this parallel array and a start value, going right to left.
Applies a binary operator to all elements of this parallel array and a start value, going right to left.
Note: :\
is alternate syntax for foldRight
; xs :\ z
is the same as
xs foldRight z
.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the start value
the binary operator
the result of inserting op
between consecutive elements of this parallel array
,
going right to left with the start value z
on the right:
op(x1, op(x2, ... op(xn, z)...))
where x_{1}, ..., x_{n}
are the elements of this parallel array
.
Test two objects for equality.
Test two objects for equality.
The expression x == that
is equivalent to if (x eq null) that eq null else x.equals(that)
.
true
if the receiver object is equivalent to the argument; false
otherwise.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold
and reduce
. It has similar semantics, but does
not require the result to be a supertype of the element type. It traverses the elements in
different partitions sequentially, using seqop
to update the result, and then
applies combop
to results from different partitions. The implementation of this
operation may operate on an arbitrary number of collection partitions, so combop
may be invoked arbitrary number of times.
For example, one might want to process some elements and then produce a Set
. In this
case, seqop
would process an element and append it to the list, while combop
would concatenate two lists from different partitions together. The initial value
z
would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop
operator (e.g.
Nil
for list concatenation or 0
for summation)
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Selects an element by its index in the parallel array .
Selects an element by its index in the parallel array .
Example:
scala> val x = LinkedList(1, 2, 3, 4, 5) x: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4, 5) scala> x(3) res1: Int = 4
the element of this parallel array
at index idx
, where 0
indicates the first element.
if idx
does not satisfy 0 <= idx < length
.
Cast the receiver object to be of type T0
.
Cast the receiver object to be of type T0
.
Note that the success of a cast at runtime is modulo Scala's erasure semantics.
Therefore the expression 1.asInstanceOf[String]
will throw a ClassCastException
at
runtime, while the expression List(1).asInstanceOf[List[String]]
will not.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the requested type.
the receiver object.
if the receiver object is not an instance of the erasure of type T0
.
Create a copy of the receiver object.
[use case]
the element type of the returned collection.
the partial function which filters and maps the parallel array .
a new parallel array
resulting from applying the given partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Creates a combiner factory.
Creates a combiner factory. Each combiner factory instance is used once per invocation of a parallel transformer method for a single collection.
The default combiner factory creates a new combiner every time it
is requested, unless the combiner is thread-safe as indicated by its
canBeShared
method. In this case, the method returns a factory which
returns the same combiner each time. This is typically done for
concurrent parallel collections, the combiners of which allow
thread safe access.
The factory companion object that builds instances of class ParArray.
The factory companion object that builds instances of class ParArray.
(or its Iterable
superclass where class ParArray is not a Seq
.)
[use case]
the array to fill.
the starting index.
[use case]
the array to fill.
Tests whether every element of this parallel array relates to the corresponding element of another parallel sequence by satisfying a test predicate.
Tests whether every element of this parallel array relates to the corresponding element of another parallel sequence by satisfying a test predicate.
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
the type of the elements of that
the other parallel sequence
the test predicate, which relates elements from both sequences
true
if both parallel sequences have the same length and
p(x, y)
is true
for all corresponding elements x
of this parallel array
and y
of that
, otherwise false
Counts the number of elements in the parallel array which satisfy a predicate.
Counts the number of elements in the parallel array which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p
.
[use case]
the sequence of elements to remove
a new parallel array which contains all elements of this parallel array
except some of occurrences of elements that also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will not form
part of the result, but any following occurrences will.
Builds a new parallel array from this parallel array without any duplicate elements.
Builds a new parallel array from this parallel array without any duplicate elements.
Note: will not terminate for infinite-sized collections.
A new parallel array which contains the first occurrence of every element of this parallel array .
Selects all elements except first n ones.
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to drop from this parallel array .
a parallel array
consisting of all elements of this parallel array
except the first n
ones, or else the
empty parallel array
, if this parallel array
has less than n
elements.
Drops all elements in the longest prefix of elements that satisfy the predicate, and returns a collection composed of the remaining elements.
Drops all elements in the longest prefix of elements that satisfy the predicate, and returns a collection composed of the remaining elements.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to maximum integer value.
the predicate used to test the elements
a collection composed of all the elements after the longest prefix of elements
in this parallel array
that satisfy the predicate pred
Tests whether this parallel array ends with the given parallel sequence.
Tests whether this parallel array ends with the given parallel sequence.
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
the type of the elements of that
sequence
the sequence to test
true
if this parallel array
has that
as a suffix, false
otherwise
Tests whether the argument (arg0
) is a reference to the receiver object (this
).
Tests whether the argument (arg0
) is a reference to the receiver object (this
).
The eq
method implements an equivalence relation on
non-null instances of AnyRef
, and has three additional properties:
x
and y
of type AnyRef
, multiple invocations of
x.eq(y)
consistently returns true
or consistently returns false
.x
of type AnyRef
, x.eq(null)
and null.eq(x)
returns false
.null.eq(null)
returns true
. When overriding the equals
or hashCode
methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2
), they
should be equal to each other (o1 == o2
) and they should hash to the same value (o1.hashCode == o2.hashCode
).
true
if the argument is a reference to the receiver object; false
otherwise.
The equals method for arbitrary sequences.
The equals method for arbitrary sequences. Compares this sequence to some other object.
The object to compare the sequence to
true
if that
is a sequence that has the same elements as
this sequence in the same order, false
otherwise
Tests whether a predicate holds for some element of this parallel array .
Tests whether a predicate holds for some element of this parallel array .
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
true if p
holds for some element, false otherwise
Selects all elements of this parallel array which satisfy a predicate.
Selects all elements of this parallel array which satisfy a predicate.
a new parallel array
consisting of all elements of this parallel array
that satisfy the given
predicate p
. Their order may not be preserved.
Selects all elements of this parallel array which do not satisfy a predicate.
Selects all elements of this parallel array which do not satisfy a predicate.
a new parallel array
consisting of all elements of this parallel array
that do not satisfy the given
predicate p
. Their order may not be preserved.
Called by the garbage collector on the receiver object when there are no more references to the object.
Called by the garbage collector on the receiver object when there are no more references to the object.
The details of when and if the finalize
method is invoked, as
well as the interaction between finalize
and non-local returns
and exceptions, are all platform dependent.
Finds some element in the collection for which the predicate holds, if such an element exists.
Finds some element in the collection for which the predicate holds, if such an element exists. The element may not necessarily be the first such element in the iteration order.
If there are multiple elements obeying the predicate, the choice is nondeterministic.
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
an option value with the element if such an element exists, or None
otherwise
[use case]
the element type of the returned collection.
the function to apply to each element.
a new parallel array
resulting from applying the given collection-valued function
f
to each element of this parallel array
and concatenating the results.
[use case]
the type of the elements of each traversable collection.
a new parallel array resulting from concatenating all element parallel array s.
Folds the elements of this sequence using the specified associative binary operator.
Folds the elements of this sequence using the specified associative binary operator. The order in which the elements are reduced is unspecified and may be nondeterministic.
Note this method has a different signature than the foldLeft
and foldRight
methods of the trait Traversable
.
The result of folding may only be a supertype of this parallel collection's
type parameter T
.
a type parameter for the binary operator, a supertype of T
.
a neutral element for the fold operation, it may be added to the result
an arbitrary number of times, not changing the result (e.g. Nil
for list concatenation,
0 for addition, or 1 for multiplication)
a binary operator that must be associative
the result of applying fold operator op
between all the elements and z
Applies a binary operator to a start value and all elements of this parallel array , going left to right.
Applies a binary operator to a start value and all elements of this parallel array , going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this parallel array
,
going left to right with the start value z
on the left:
op(...op(z, x1), x2, ..., xn)
where x_{1}, ..., x_{n}
are the elements of this parallel array
.
Applies a binary operator to all elements of this parallel array and a start value, going right to left.
Applies a binary operator to all elements of this parallel array and a start value, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this parallel array
,
going right to left with the start value z
on the right:
op(x1, op(x2, ... op(xn, z)...))
where x_{1}, ..., x_{n}
are the elements of this parallel array
.
Tests whether a predicate holds for all elements of this parallel array .
Tests whether a predicate holds for all elements of this parallel array .
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
true if p
holds for all elements, false otherwise
Applies a function f
to all the elements of parallel array
in a sequential order.
Applies a function f
to all the elements of parallel array
in a sequential order.
the result type of the function applied to each element, which is always discarded
function applied to each element
The generic builder that builds instances of ParArray at arbitrary element types.
The generic builder that builds instances of ParArray at arbitrary element types.
A representation that corresponds to the dynamic class of the receiver object.
A representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
not specified by SLS as a member of AnyRef
Partitions this parallel array into a map of parallel array s according to some discriminator function.
Partitions this parallel array into a map of parallel array s according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new parallel array .
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to parallel array s such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k)
That is, every key k
is bound to a parallel array
of those elements x
for which f(x)
equals k
.
Hashcodes for ParArray produce a value from the hashcodes of all the elements of the parallel array .
Hashcodes for ParArray produce a value from the hashcodes of all the elements of the parallel array .
the hash code value for this object.
[use case]
the element value to search for.
the start index
the index >= from
of the first element of this parallel array
that is equal (wrt ==
)
to elem
, or -1
, if none exists.
[use case]
the element value to search for.
the index of the first element of this parallel array
that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds the first element satisfying some predicate.
Finds the first element satisfying some predicate.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to maximum integer value.
the predicate used to test the elements
the starting offset for the search
the index >= from
of the first element of this parallel array
that satisfies the predicate p
,
or -1
, if none exists
Finds index of first element satisfying some predicate.
Finds index of first element satisfying some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the first element of this parallel array
that satisfies the predicate p
,
or -1
, if none exists.
[use case]
the sequence of elements to intersect with.
a new parallel array which contains all elements of this parallel array
which also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will be retained
in the result, but any following occurrences will be omitted.
Tests whether this parallel array contains given index.
Tests whether this parallel array contains given index.
The implementations of methods apply
and isDefinedAt
turn a Seq[A]
into
a PartialFunction[Int, A]
.
the index to test
true
if this parallel array
contains an element at position idx
, false
otherwise.
Tests whether the parallel array is empty.
Tests whether the parallel array is empty.
true
if the parallel array
contains no elements, false
otherwise.
Test whether the dynamic type of the receiver object is T0
.
Test whether the dynamic type of the receiver object is T0
.
Note that the result of the test is modulo Scala's erasure semantics.
Therefore the expression 1.isInstanceOf[String]
will return false
, while the
expression List(1).isInstanceOf[List[String]]
will return true
.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the specified type.
true
if the receiver object is an instance of erasure of type T0
; false
otherwise.
Denotes whether this parallel collection has strict splitters.
Denotes whether this parallel collection has strict splitters.
This is true in general, and specific collection instances may choose to
override this method. Such collections will fail to execute methods
which rely on splitters being strict, i.e. returning a correct value
in the remaining
method.
This method helps ensure that such failures occur on method invocations, rather than later on and in unpredictable ways.
Tests whether this parallel array can be repeatedly traversed.
Tests whether this parallel array can be repeatedly traversed.
true
Creates a new split iterator used to traverse the elements of this collection.
Creates a new split iterator used to traverse the elements of this collection.
By default, this method is implemented in terms of the protected splitter
method.
a split iterator
[use case]
the element value to search for.
the end index.
the index <= end
of the last element of this parallel array
that is equal (wrt ==
)
to elem
, or -1
, if none exists.
[use case]
the element value to search for.
the index of the last element of this parallel array
that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds the last element satisfying some predicate.
Finds the last element satisfying some predicate.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to minimum integer value.
the predicate used to test the elements
the maximum offset for the search
the index <= end
of the first element of this parallel array
that satisfies the predicate p
,
or -1
, if none exists
Finds index of last element satisfying some predicate.
Finds index of last element satisfying some predicate.
Note: will not terminate for infinite-sized collections.
the predicate used to test elements.
the index of the last element of this parallel array
that satisfies the predicate p
,
or -1
, if none exists.
The length of the parallel array .
The length of the parallel array .
Note: will not terminate for infinite-sized collections.
Note: xs.length
and xs.size
yield the same result.
the number of elements in this parallel array .
[use case]
the element type of the returned collection.
the function to apply to each element.
a new parallel array
resulting from applying the given function
f
to each element of this parallel array
and collecting the results.
[use case]
the largest element of this parallel array .
[use case]
the smallest element of this parallel array
Displays all elements of this parallel array in a string.
Displays all elements of this parallel array in a string.
a string representation of this parallel array
. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this parallel array
follow each other without any
separator string.
Displays all elements of this parallel array in a string using a separator string.
Displays all elements of this parallel array in a string using a separator string.
the separator string.
a string representation of this parallel array
. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this parallel array
are separated by the string sep
.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this parallel array in a string using start, end, and separator strings.
Displays all elements of this parallel array in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this parallel array
. The resulting string
begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method
toString
) of all elements of this parallel array
are separated by
the string sep
.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Equivalent to !(this eq that)
.
Equivalent to !(this eq that)
.
true
if the argument is not a reference to the receiver object; false
otherwise.
The builder that builds instances of type ParArray[A]
The builder that builds instances of type ParArray[A]
Tests whether the parallel array is not empty.
Tests whether the parallel array is not empty.
true
if the parallel array
contains at least one element, false
otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
[use case]
the target length
the padding value
a new parallel array
consisting of
all elements of this parallel array
followed by the minimal number of occurrences of elem
so
that the resulting parallel array
has a length of at least len
.
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par
takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray
or mutable.ParHashMap
) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par
takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
The default par
implementation uses the combiner provided by this method
to create a new parallel collection.
The default par
implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this parallel array in two parallel array s according to a predicate.
Partitions this parallel array in two parallel array s according to a predicate.
a pair of parallel array
s: the first parallel array
consists of all elements that
satisfy the predicate p
and the second parallel array
consists of all elements
that don't. The relative order of the elements in the resulting parallel array
s
may not be preserved.
[use case]
the index of the first replaced element
the number of elements to drop in the original parallel array
a new parallel array consisting of all elements of this parallel array
except that replaced
elements starting from from
are replaced
by patch
.
Returns the length of the longest prefix whose elements all satisfy some predicate.
Returns the length of the longest prefix whose elements all satisfy some predicate.
Note: may not terminate for infinite-sized collections.
the predicate used to test elements.
the length of the longest prefix of this parallel array
such that every element of the segment satisfies the predicate p
.
[use case]
the product of all elements in this parallel array
of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the parallel array
and as result type of product
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Reduces the elements of this sequence using the specified associative binary operator.
Reduces the elements of this sequence using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note this method has a different signature than the reduceLeft
and reduceRight
methods of the trait Traversable
.
The result of reducing may only be a supertype of this parallel collection's
type parameter T
.
A type parameter for the binary operator, a supertype of T
.
A binary operator that must be associative.
The result of applying reduce operator op
between all the elements if the collection is nonempty.
if this parallel array is empty.
Optionally applies a binary operator to all elements of this parallel array , going left to right.
Optionally applies a binary operator to all elements of this parallel array , going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the binary operator.
an option value containing the result of reduceLeft(op)
is this parallel array
is nonempty,
None
otherwise.
Optionally reduces the elements of this sequence using the specified associative binary operator.
Optionally reduces the elements of this sequence using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note this method has a different signature than the reduceLeftOption
and reduceRightOption
methods of the trait Traversable
.
The result of reducing may only be a supertype of this parallel collection's
type parameter T
.
A type parameter for the binary operator, a supertype of T
.
A binary operator that must be associative.
An option value containing result of applying reduce operator op
between all
the elements if the collection is nonempty, and None
otherwise.
Applies a binary operator to all elements of this parallel array , going right to left.
Applies a binary operator to all elements of this parallel array , going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the binary operator.
the result of inserting op
between consecutive elements of this parallel array
,
going right to left:
op(x,,1,,, op(x,,2,,, ..., op(x,,n-1,,, x,,n,,)...))
where x_{1}, ..., x_{n}
are the elements of this parallel array
.
if this parallel array is empty.
Optionally applies a binary operator to all elements of this parallel array , going right to left.
Optionally applies a binary operator to all elements of this parallel array , going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the binary operator.
an option value containing the result of reduceRight(op)
is this parallel array
is nonempty,
None
otherwise.
Optionally reuses an existing combiner for better performance.
Optionally reuses an existing combiner for better performance. By default it doesn't - subclasses may override this behaviour.
The provided combiner oldc
that can potentially be reused will be either some combiner from the previous computational task, or None
if there
was no previous phase (in which case this method must return newc
).
The combiner that is the result of the previous task, or None
if there was no previous task.
The new, empty combiner that can be used.
Either newc
or oldc
.
Returns new parallel array wih elements in reversed order.
Returns new parallel array wih elements in reversed order.
Note: will not terminate for infinite-sized collections.
A new parallel array with all elements of this parallel array in reversed order.
[use case] Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
the element type of the returned collection.
the function to apply to each element.
a new parallel array
resulting from applying the given function
f
to each element of this parallel array
and collecting the results in reversed order.
[use case]
the collection to compare with.
true
, if both collections contain the same elements in the same order, false
otherwise.
[use case]
neutral element for the operator op
the associative operator for the scan
a new parallel array containing the prefix scan of the elements in this parallel array
Produces a collection containing cummulative results of applying the operator going left to right.
Produces a collection containing cummulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines
the result class That
from the current representation type Repr
and
and the new element type B
.
collection with intermediate results
Produces a collection containing cummulative results of applying the operator going right to left.
Produces a collection containing cummulative results of applying the operator going right to left. The head of the collection is the last cummulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines
the result class That
from the current representation type Repr
and
and the new element type B
.
collection with intermediate results
Returns the length of the longest segment of elements starting at a given position satisfying some predicate.
Returns the length of the longest segment of elements starting at a given position satisfying some predicate.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to maximum integer value.
the predicate used to test the elements
the starting offset for the search
the length of the longest segment of elements starting at from
and
satisfying the predicate
The size of this parallel array .
The size of this parallel array .
Note: will not terminate for infinite-sized collections.
the number of elements in this parallel array .
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x
which satisfy the invariant:
from <= indexOf(x) < until
Note: might return different results for different runs, unless the underlying collection type is ordered.
a parallel array
containing the elements greater than or equal to
index from
extending up to (but not including) index until
of this parallel array
.
Splits this parallel array into a prefix/suffix pair according to a predicate.
Splits this parallel array into a prefix/suffix pair according to a predicate.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to maximum integer value.
the predicate used to test the elements
a pair consisting of the longest prefix of the collection for which all
the elements satisfy pred
, and the rest of the collection
Splits this parallel array into two at a given position.
Splits this parallel array
into two at a given position.
Note: c splitAt n
is equivalent to (but possibly more efficient than)
(c take n, c drop n)
.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of parallel array
s consisting of the first n
elements of this parallel array
, and the other elements.
A more refined version of the iterator found in the ParallelIterable
trait,
this iterator can be split into arbitrary subsets of iterators.
A more refined version of the iterator found in the ParallelIterable
trait,
this iterator can be split into arbitrary subsets of iterators.
an iterator that can be split into subsets of precise size
Tests whether this parallel array contains the given sequence at a given index.
Tests whether this parallel array contains the given sequence at a given index.
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
the parallel sequence this sequence is being searched for
the starting offset for the search
true
if there is a sequence that
starting at offset
in this sequence, false
otherwise
Tests whether this parallel array starts with the given sequence.
Tests whether this parallel array starts with the given sequence.
the sequence to test
true
if this collection has that
as a prefix, false
otherwise.
Defines the prefix of this object's toString
representation.
Defines the prefix of this object's toString
representation.
a string representation which starts the result of toString
applied to this parallel array
. By default the string prefix is the
simple name of the collection class parallel array
.
[use case]
the sum of all elements in this parallel array
of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the parallel array
and as result type of sum
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Selects all elements except the first.
Selects all elements except the first.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a parallel array consisting of all elements of this parallel array
except the first one.
if the parallel array is empty.
Selects first n elements.
Selects first n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Tt number of elements to take from this parallel array .
a parallel array
consisting only of the first n
elements of this parallel array
,
or else the whole parallel array
, if it has less than n
elements.
Takes the longest prefix of elements that satisfy the predicate.
Takes the longest prefix of elements that satisfy the predicate.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to maximum integer value.
the predicate used to test the elements
the longest prefix of this parallel array
of elements that satisy the predicate pred
[use case]
an array containing all elements of this parallel array
.
A ClassManifest
must be available for the element type of this parallel array
.
Converts this parallel array to a mutable buffer.
Converts this parallel array to a mutable buffer.
Note: will not terminate for infinite-sized collections.
a buffer containing all elements of this parallel array .
Converts this parallel array to an indexed sequence.
Converts this parallel array to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this parallel array .
Converts this parallel array to an iterable collection.
Converts this parallel array
to an iterable collection. Note that
the choice of target Iterable
is lazy in this default implementation
as this TraversableOnce
may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
Note: will not terminate for infinite-sized collections.
an Iterable
containing all elements of this parallel array
.
Returns an Iterator over the elements in this parallel array .
Returns an Iterator over the elements in this parallel array . Will return the same Iterator if this instance is already an Iterator.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this parallel array .
Converts this parallel array to a list.
Converts this parallel array to a list.
Note: will not terminate for infinite-sized collections.
a list containing all elements of this parallel array .
[use case]
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U)
of this parallel array
.
Converts this parallel array to a sequence.
Converts this parallel array
to a sequence. As with toIterable
, it's lazy
in this default implementation, as this TraversableOnce
may be
lazy and unevaluated.
Note: will not terminate for infinite-sized collections.
a sequence containing all elements of this parallel array .
Converts this parallel array to a set.
Converts this parallel array to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this parallel array .
Converts this parallel array to a stream.
Converts this parallel array to a stream.
Note: will not terminate for infinite-sized collections.
a stream containing all elements of this parallel array .
Creates a String representation of this object.
Creates a String representation of this object. The default representation is platform dependent. On the java platform it is the concatenation of the class name, "@", and the object's hashcode in hexadecimal.
a String representation of the object.
Converts this parallel array to an unspecified Traversable.
Converts this parallel array to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this parallel array .
Transposes this parallel array of traversable collections into a parallel array of parallel array s.
Transposes this parallel array of traversable collections into a parallel array of parallel array s.
the type of the elements of each traversable collection.
an implicit conversion which asserts that the
element type of this parallel array
is a Traversable
.
a two-dimensional parallel array of parallel array s which has as nth row the nth column of this parallel array .
(Changed in version 2.9.0) transpose
throws an IllegalArgumentException
if collections are not uniformly sized.
if all collections in this parallel array
are not of the same size.
[use case]
the sequence to add.
a new parallel array which contains all elements of this parallel array
followed by all elements of that
.
Converts this parallel array of pairs into two collections of the first and second half of each pair.
Converts this parallel array of pairs into two collections of the first and second half of each pair.
an implicit conversion which asserts that the element type of this parallel array is a pair.
a pair parallel array s, containing the first, respectively second half of each element pair of this parallel array .
Converts this parallel array of triples into three collections of the first, second, and third element of each triple.
Converts this parallel array of triples into three collections of the first, second, and third element of each triple.
an implicit conversion which asserts that the element type of this parallel array is a triple.
a triple parallel array s, containing the first, second, respectively third member of each element triple of this parallel array .
[use case]
the position of the replacement
the replacing element
a copy of this parallel array
with the element at position index
replaced by elem
.
[use case]
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new parallel array
containing pairs consisting of
corresponding elements of this parallel array
and that
. The length
of the returned collection is the minimum of the lengths of this parallel array
and that
.
[use case]
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this parallel array
is shorter than that
.
the element to be used to fill up the result if that
is shorter than this parallel array
.
a new parallel array
containing pairs consisting of
corresponding elements of this parallel array
and that
. The length
of the returned collection is the maximum of the lengths of this parallel array
and that
.
If this parallel array
is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this parallel array
, thatElem
values are used to pad the result.
[use case]
A new parallel array
containing pairs consisting of all elements of this
parallel array
paired with their index. Indices start at 0
.
@example
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Parallel sequence holding elements in a linear array.
ParArray
is a parallel sequence with a predefined size. The size of the array cannot be changed after it's been created.ParArray
internally keeps an array containing the elements. This means that bulk operations based on traversal ensure fast access to elements.ParArray
uses lazy builders that create the internal data array only after the size of the array is known. In the meantime, they keep the result set fragmented. The fragments are copied into the resulting data array in parallel using fast array copy operations once all the combiners are populated in parallel.type of the elements in the array