The type implementing this traversable
A class supporting filtered operations .
o != arg0
is the same as !(o == (arg0))
.
o != arg0
is the same as !(o == (arg0))
.
the object to compare against this object for dis-equality .
false
if the receiver object is equivalent to the argument; true
otherwise.
[use case] Concatenates this linear sequence with the elements of a traversable collection .
Concatenates this linear sequence with the elements of a traversable collection .
the traversable to append .
a new linear sequence which contains all elements of this linear sequence
followed by all elements of that
.
Concatenates this linear sequence with the elements of a traversable collection .
Concatenates this linear sequence with the elements of a traversable collection .
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
which contains all elements of this linear sequence
followed by all elements of that
.
[use case] Prepends an element to this linear sequence
Prepends an element to this linear sequence
the prepended element
a new linear sequence consisting of elem
followed
by all elements of this linear sequence.
Prepends an element to this linear sequence
Prepends an element to this linear sequence
the element type of the returned linear sequence .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the prepended element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
consisting of elem
followed
by all elements of this linear sequence.
Applies a binary operator to a start value and all elements of this linear sequence, going left to right .
Applies a binary operator to a start value and all elements of this linear sequence, going left to right .
Note: /:
is alternate syntax for foldLeft
; z /: xs
is the same as xs foldLeft z
.
Note: will not terminate for infinite-sized collections.
the result type of the binary operator .
the start value .
the binary operator .
the result of inserting op
between consecutive elements of this linear sequence,
going left to right with the start value z
on the left:
op(...op(op(z, x_{1}), x_{2}), ..., x_{n})
where x,,1,,, ..., x,,n,,
are the elements of this linear sequence.
[use case] Appends an element to this linear sequence
Appends an element to this linear sequence
Note: will not terminate for infinite-sized collections.
the appended element
a new linear sequence consisting of
all elements of this linear sequence followed by elem
.
Appends an element to this linear sequence
Appends an element to this linear sequence
Note: will not terminate for infinite-sized collections.
the element type of the returned linear sequence .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the appended element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
consisting of
all elements of this linear sequence followed by elem
.
Applies a binary operator to all elements of this linear sequence and a start value, going right to left .
Applies a binary operator to all elements of this linear sequence and a start value, going right to left .
Note: :\
is alternate syntax for foldRight
; xs :\ z
is the same as xs foldRight z
.
Note: will not terminate for infinite-sized collections.
the result type of the binary operator .
the start value
the binary operator
the result of inserting op
between consecutive elements of this linear sequence,
going right to left with the start value z
on the right:
op(x_{1}, op(x_{2}, ... op(x_{n}, z)...))
where x,,1,,, ..., x,,n,,
are the elements of this linear sequence.
o == arg0
is the same as if (o eq null) arg0 eq null else o.equals(arg0)
.
o == arg0
is the same as if (o eq null) arg0 eq null else o.equals(arg0)
.
the object to compare against this object for equality .
true
if the receiver object is equivalent to the argument; false
otherwise.
o == arg0
is the same as o.equals(arg0)
.
o == arg0
is the same as o.equals(arg0)
.
the object to compare against this object for equality .
true
if the receiver object is equivalent to the argument; false
otherwise.
Appends all elements of this linear sequence to a string builder .
Appends all elements of this linear sequence to a string builder.
The written text consists of the string representations (w.r.t. the method toString
)
of all elements of this linear sequence without any separator string.
the string builder to which elements are appended .
the string builder b
to which elements were appended.
Appends all elements of this linear sequence to a string builder using a separator string .
Appends all elements of this linear sequence to a string builder using a separator string.
The written text consists of the string representations (w.r.t. the method toString
)
of all elements of this linear sequence, separated by the string sep
.
the string builder to which elements are appended .
the separator string .
the string builder b
to which elements were appended.
Appends all elements of this linear sequence to a string builder using start, end, and separator strings .
Appends all elements of this linear sequence to a string builder using start, end, and separator strings.
The written text begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method toString
)
of all elements of this linear sequence are separated by the string sep
.
the string builder to which elements are appended .
the starting string .
the separator string .
the ending string .
the string builder b
to which elements were appended.
Composes this partial function with a transformation function that gets applied to results of this partial function .
Composes this partial function with a transformation function that gets applied to results of this partial function .
the result type of the transformation function .
the transformation function
a partial function with the same domain as this partial function, which maps
arguments x
to k(this(x))
.
Selects an element by its index in the linear sequence .
Selects an element by its index in the linear sequence .
The index to select .
the element of this linear sequence at index idx
, where 0
indicates the first element.
This method is used to cast the receiver object to be of type T0
.
This method is used to cast the receiver object to be of type T0
.
Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression1.asInstanceOf[String]
will throw a ClassCastException
at runtime, while the expressionList(1).asInstanceOf[List[String]]
will not. In the latter example, because the type argument is erased as
part of compilation it is not possible to check whether the contents of the list are of the requested typed.
the receiver object .
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind .
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind .
The object with which this linear sequence should be compared
true
, if this linear sequence can possibly equal that
, false
otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
This method creates and returns a copy of the receiver object .
This method creates and returns a copy of the receiver object .
The default implementation of the clone
method is platform dependent.
a copy of the receiver object .
[use case] Builds a new collection by applying a partial function to all elements of this linear sequence on which the function is defined .
Builds a new collection by applying a partial function to all elements of this linear sequence on which the function is defined .
the element type of the returned collection .
the partial function which filters and maps the linear sequence .
a new linear sequence resulting from applying the given partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Builds a new collection by applying a partial function to all elements of this linear sequence on which the function is defined .
Builds a new collection by applying a partial function to all elements of this linear sequence on which the function is defined .
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the partial function which filters and maps the linear sequence .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
resulting from applying the partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
The factory companion object that builds instances of class LinearSeq .
The factory companion object that builds instances of class LinearSeq .
(f compose g)(x) == f(g(x))
(f compose g)(x) == f(g(x))
Tests whether this linear sequence contains a given value as an element .
Tests whether this linear sequence contains a given value as an element .
Note: may not terminate for infinite-sized collections.
the element to test .
true
if this linear sequence has an element that is
is equal (wrt ==
) to elem
, false
otherwise.
Tests whether this linear sequence contains a given sequence as a slice .
Tests whether this linear sequence contains a given sequence as a slice .
Note: may not terminate for infinite-sized collections.
the sequence to test
true
if this linear sequence contains a slice with the same elements
as that
, otherwise false
.
[use case] Copies elements of this linear sequence to an array .
Copies elements of this linear sequence to an array.
Fills the given array xs
with at most len
elements of
this linear sequence, starting at position start
.
Copying will stop once either the end of the current linear sequence is reached,
or the end of the array is reached, or len
elements have been copied.
the array to fill .
the starting index .
the maximal number of elements to copy .
Copies elements of this linear sequence to an array .
Copies elements of this linear sequence to an array.
Fills the given array xs
with at most len
elements of
this linear sequence, starting at position start
.
Copying will stop once either the end of the current linear sequence is reached,
or the end of the array is reached, or len
elements have been copied.
Note: will not terminate for infinite-sized collections.
the type of the elements of the array .
the array to fill .
the starting index .
the maximal number of elements to copy .
[use case] Copies values of this linear sequence to an array .
Copies values of this linear sequence to an array.
Fills the given array xs
with values of this linear sequence.
Copying will stop once either the end of the current linear sequence is reached,
or the end of the array is reached.
the array to fill .
Copies values of this linear sequence to an array .
Copies values of this linear sequence to an array.
Fills the given array xs
with values of this linear sequence.
Copying will stop once either the end of the current linear sequence is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the type of the elements of the array .
the array to fill .
[use case] Copies values of this linear sequence to an array .
Copies values of this linear sequence to an array.
Fills the given array xs
with values of this linear sequence, after skipping start
values.
Copying will stop once either the end of the current linear sequence is reached,
or the end of the array is reached.
the array to fill .
the starting index .
Copies values of this linear sequence to an array .
Copies values of this linear sequence to an array.
Fills the given array xs
with values of this linear sequence, after skipping start
values.
Copying will stop once either the end of the current linear sequence is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the type of the elements of the array .
the array to fill .
the starting index .
Copies all elements of this linear sequence to a buffer .
Copies all elements of this linear sequence to a buffer .
Note: will not terminate for infinite-sized collections.
The buffer to which elements are copied .
Tests whether every element of this linear sequence relates to the corresponding element of another sequence by satisfying a test predicate .
Tests whether every element of this linear sequence relates to the corresponding element of another sequence by satisfying a test predicate .
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true
if both sequences have the same length and
p(x, y)
is true
for all corresponding elements x
of this linear sequence
and y
of that
, otherwise false
.
Counts the number of elements in the linear sequence which satisfy a predicate .
Counts the number of elements in the linear sequence which satisfy a predicate .
the predicate used to test elements .
the number of elements satisfying the predicate p
.
[use case] Computes the multiset difference between this linear sequence and another sequence .
Computes the multiset difference between this linear sequence and another sequence .
Note: will not terminate for infinite-sized collections.
the sequence of elements to remove
a new linear sequence which contains all elements of this linear sequence
except some of occurrences of elements that also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will not form
part of the result, but any following occurrences will.
Computes the multiset difference between this linear sequence and another sequence .
Computes the multiset difference between this linear sequence and another sequence .
Note: will not terminate for infinite-sized collections.
the element type of the returned linear sequence .
the sequence of elements to remove
a new collection of type That
which contains all elements of this linear sequence
except some of occurrences of elements that also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will not form
part of the result, but any following occurrences will.
Builds a new linear sequence from this linear sequence without any duplicate elements .
Builds a new linear sequence from this linear sequence without any duplicate elements .
Note: will not terminate for infinite-sized collections.
A new linear sequence which contains the first occurrence of every element of this linear sequence .
Selects all elements except first n ones.
Selects all elements except first n ones.
the number of elements to drop from this linear sequence .
a linear sequence consisting of all elements of this linear sequence except the first n
ones, or else the
empty linear sequence, if this linear sequence has less than n
elements.
Selects all elements except last n ones.
Selects all elements except last n ones.
The number of elements to take
a linear sequence consisting of all elements of this linear sequence except the first n
ones, or else the
empty linear sequence, if this linear sequence has less than n
elements.
Drops longest prefix of elements that satisfy a predicate .
Drops longest prefix of elements that satisfy a predicate .
The predicate used to test elements .
the longest suffix of this linear sequence whose first element
does not satisfy the predicate p
.
use iterator' instead
Tests whether this linear sequence ends with the given sequence .
Tests whether this linear sequence ends with the given sequence .
Note: will not terminate for infinite-sized collections.
the sequence to test
true
if this linear sequence has that
as a suffix, false
otherwise.
This method is used to test whether the argument (arg0
) is a reference to the
receiver object (this
).
This method is used to test whether the argument (arg0
) is a reference to the
receiver object (this
).
The eq
method implements an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence relation] on
non-null instances of AnyRef
:
* It is reflexive: for any non-null instance x
of type AnyRef
, x.eq(x)
returns true
.
* It is symmetric: for any non-null instances x
and y
of type AnyRef
, x.eq(y)
returns true
if and
only if y.eq(x)
returns true
.
* It is transitive: for any non-null instances x
, y
, and z
of type AnyRef
if x.eq(y)
returns true
and y.eq(z)
returns true
, then x.eq(z)
returns true
.
Additionally, the eq
method has three other properties.
* It is consistent: for any non-null instances x
and y
of type AnyRef
, multiple invocations of
x.eq(y)
consistently returns true
or consistently returns false
.
* For any non-null instance x
of type AnyRef
, x.eq(null)
and null.eq(x)
returns false
.
* null.eq(null)
returns true
.
When overriding the equals
or hashCode
methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2
), they
should be equal to each other (o1 == o2
) and they should hash to the same value (o1.hashCode == o2.hashCode
).
the object to compare against this object for reference equality .
true
if the argument is a reference to the receiver object; false
otherwise.
The equality method defined in AnyRef
.
The equality method defined in AnyRef
[email protected] true
if the receiver object is equivalent to the argument; false
otherwise. */
Tests whether every element of this linear sequence relates to the corresponding element of another sequence by satisfying a test predicate .
Tests whether every element of this linear sequence relates to the corresponding element of another sequence by satisfying a test predicate .
the type of the elements of that
the other sequence
true
if both sequences have the same length and
p(x, y)
is true
for all corresponding elements x
of this linear sequence
and y
of that
, otherwise false
.
use corresponds
instead
Tests whether a predicate holds for some of the elements of this linear sequence .
Tests whether a predicate holds for some of the elements of this linear sequence .
Note: may not terminate for infinite-sized collections.
the predicate used to test elements .
true
if the given predicate p
holds for some of the elements
of this linear sequence, otherwise false
.
Selects all elements of this linear sequence which satisfy a predicate .
Selects all elements of this linear sequence which satisfy a predicate .
the predicate used to test elements .
a new linear sequence consisting of all elements of this linear sequence that satisfy the given
predicate p
. The order of the elements is preserved.
Selects all elements of this linear sequence which do not satisfy a predicate .
Selects all elements of this linear sequence which do not satisfy a predicate .
the predicate used to test elements .
a new linear sequence consisting of all elements of this linear sequence that do not satisfy the given
predicate p
. The order of the elements is preserved.
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object .
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object .
The details of when and if the finalize
method are invoked, as well as the interaction between finalize
and non-local returns and exceptions, are all platform dependent.
Finds the first element of the linear sequence satisfying a predicate, if any .
Finds the first element of the linear sequence satisfying a predicate, if any .
Note: may not terminate for infinite-sized collections.
the predicate used to test elements .
an option value containing the first element in the linear sequence
that satisfies p
, or None
if none exists.
Returns index of the first element satisfying a predicate, or -1
.
Returns index of the first element satisfying a predicate, or -1
.
Returns index of the last element satisfying a predicate, or -1 .
Returns index of the last element satisfying a predicate, or -1 .
use lastIndexWhere
instead
use head' instead
None
if iterable is empty.
[use case] Builds a new collection by applying a function to all elements of this linear sequence and concatenating the results .
Builds a new collection by applying a function to all elements of this linear sequence and concatenating the results .
the element type of the returned collection .
the function to apply to each element .
a new linear sequence resulting from applying the given collection-valued function
f
to each element of this linear sequence and concatenating the results.
Builds a new collection by applying a function to all elements of this linear sequence and concatenating the results .
Builds a new collection by applying a function to all elements of this linear sequence and concatenating the results .
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
resulting from applying the given collection-valued function
f
to each element of this linear sequence and concatenating the results.
[use case] Converts this linear sequence of traversable collections into a linear sequence in which all element collections are concatenated .
Converts this linear sequence of traversable collections into a linear sequence in which all element collections are concatenated .
the type of the elements of each traversable collection .
a new linear sequence resulting from concatenating all element linear sequences .
Converts this linear sequence of traversable collections into a linear sequence in which all element collections are concatenated .
Converts this linear sequence of traversable collections into a linear sequence in which all element collections are concatenated .
the type of the elements of each traversable collection .
an implicit conversion which asserts that the element type of this
linear sequence is a Traversable
.
a new linear sequence resulting from concatenating all element linear sequences .
Applies a binary operator to a start value and all elements of this linear sequence, going left to right .
Applies a binary operator to a start value and all elements of this linear sequence, going left to right .
Note: will not terminate for infinite-sized collections.
the result type of the binary operator .
the start value .
the binary operator .
the result of inserting op
between consecutive elements of this linear sequence,
going left to right with the start value z
on the left:
op(...op(z, x_{1}), x_{2}, ..., x_{n})
where x,,1,,, ..., x,,n,,
are the elements of this linear sequence.
Applies a binary operator to all elements of this linear sequence and a start value, going right to left .
Applies a binary operator to all elements of this linear sequence and a start value, going right to left .
Note: will not terminate for infinite-sized collections.
the result type of the binary operator .
the start value .
the binary operator .
the result of inserting op
between consecutive elements of this linear sequence,
going right to left with the start value z
on the right:
op(x_{1}, op(x_{2}, ... op(x_{n}, z)...))
where x,,1,,, ..., x,,n,,
are the elements of this linear sequence.
Tests whether a predicate holds for all elements of this linear sequence .
Tests whether a predicate holds for all elements of this linear sequence .
Note: may not terminate for infinite-sized collections.
the predicate used to test elements .
true
if the given predicate p
holds for all elements
of this linear sequence, otherwise false
.
[use case] Applies a function f
to all elements of this linear sequence.
Applies a function f
to all elements of this linear sequence.
the function that is applied for its side-effect to every element.
The result of function f
is discarded.
Applies a function f
to all elements of this linear sequence.
Applies a function f
to all elements of this linear sequence.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the type parameter describing the result of function f
.
This result will always be ignored. Typically U
is Unit
,
but this is not necessary.
the function that is applied for its side-effect to every element.
The result of function f
is discarded.
The generic builder that builds instances of LinearSeq at arbitrary element types .
The generic builder that builds instances of LinearSeq at arbitrary element types .
Returns a representation that corresponds to the dynamic class of the receiver object .
Returns a representation that corresponds to the dynamic class of the receiver object .
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object .
Partitions this linear sequence into a map of linear sequences according to some discriminator function .
Partitions this linear sequence into a map of linear sequences according to some discriminator function .
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new linear sequence.
the type of keys returned by the discriminator function .
the discriminator function .
A map from keys to linear sequences such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k)
That is, every key k
is bound to a linear sequence of those elements x
for which f(x)
equals k
.
Partitions elements in fixed size linear sequences .
Partitions elements in fixed size linear sequences .
the number of elements per group
An iterator producing linear sequences of size size
, except the
last will be truncated if the elements don't divide evenly.
Iterator#grouped
Tests whether this linear sequence is known to have a finite size .
Tests whether this linear sequence is known to have a finite size.
All strict collections are known to have finite size. For a non-strict collection
such as Stream
, the predicate returns true
if all elements have been computed.
It returns false
if the stream is not yet evaluated to the end.
Note: many collection methods will not work on collections of infinite sizes.
true
if this collection is known to have finite size, false
otherwise.
Hashcodes for LinearSeq produce a value from the hashcodes of all the elements of the linear sequence .
Hashcodes for LinearSeq produce a value from the hashcodes of all the elements of the linear sequence . @return the hash code value for the object. */
Selects the first element of this linear sequence .
Selects the first element of this linear sequence .
the first element of this linear sequence .
Optionally selects the first element .
Optionally selects the first element .
the first element of this linear sequence if it is nonempty, None
if it is empty.
[use case] Finds index of first occurrence of some value in this linear sequence after or at some start index .
Finds index of first occurrence of some value in this linear sequence after or at some start index .
the element value to search for .
the start index
the index >= from
of the first element of this linear sequence that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of first occurrence of some value in this linear sequence after or at some start index .
Finds index of first occurrence of some value in this linear sequence after or at some start index .
Note: may not terminate for infinite-sized collections.
the type of the element elem
.
the element value to search for .
the start index
the index >= from
of the first element of this linear sequence that is equal (wrt ==
)
to elem
, or -1
, if none exists.
[use case] Finds index of first occurrence of some value in this linear sequence .
Finds index of first occurrence of some value in this linear sequence .
the element value to search for .
the index of the first element of this linear sequence that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of first occurrence of some value in this linear sequence .
Finds index of first occurrence of some value in this linear sequence .
Note: may not terminate for infinite-sized collections.
the type of the element elem
.
the element value to search for .
the index of the first element of this linear sequence that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds first index after or at a start index where this linear sequence contains a given sequence as a slice .
Finds first index after or at a start index where this linear sequence contains a given sequence as a slice .
Note: may not terminate for infinite-sized collections.
the sequence to test
the start index
the first index >= from
such that the elements of this linear sequence starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds first index where this linear sequence contains a given sequence as a slice .
Finds first index where this linear sequence contains a given sequence as a slice .
Note: may not terminate for infinite-sized collections.
the sequence to test
the first index such that the elements of this linear sequence starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index .
Finds index of the first element satisfying some predicate after or at some start index .
Note: may not terminate for infinite-sized collections.
the predicate used to test elements .
the start index
the index >= from
of the first element of this linear sequence that satisfies the predicate p
,
or -1
, if none exists.
Finds index of first element satisfying some predicate .
Finds index of first element satisfying some predicate .
Note: may not terminate for infinite-sized collections.
the predicate used to test elements .
the index of the first element of this linear sequence that satisfies the predicate p
,
or -1
, if none exists.
Produces the range of all indices of this sequence .
Produces the range of all indices of this sequence .
a Range
value from 0
to one less than the length of this linear sequence.
Selects all elements except the last .
Selects all elements except the last .
a linear sequence consisting of all elements of this linear sequence except the last one .
[use case] Computes the multiset intersection between this linear sequence and another sequence .
Computes the multiset intersection between this linear sequence and another sequence .
Note: may not terminate for infinite-sized collections.
the sequence of elements to intersect with .
a new linear sequence which contains all elements of this linear sequence
which also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will be retained
in the result, but any following occurrences will be omitted.
Computes the multiset intersection between this linear sequence and another sequence .
Computes the multiset intersection between this linear sequence and another sequence .
Note: may not terminate for infinite-sized collections.
the element type of the returned linear sequence .
the sequence of elements to intersect with .
a new collection of type That
which contains all elements of this linear sequence
which also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will be retained
in the result, but any following occurrences will be omitted.
Tests whether this linear sequence contains given index .
Tests whether this linear sequence contains given index .
The implementations of methods apply
and isDefinedAt
turn a Seq[A]
into
a PartialFunction[Int, A]
.
the index to test
true
if this linear sequence contains an element at position idx
, false
otherwise.
Tests whether this linear sequence is empty .
Tests whether this linear sequence is empty .
true
if the linear sequence contain no elements, false
otherwise.
This method is used to test whether the dynamic type of the receiver object is T0
.
This method is used to test whether the dynamic type of the receiver object is T0
.
Note that the test result of the test is modulo Scala's erasure semantics. Therefore the expression1.isInstanceOf[String]
will return false
, while the expression List(1).isInstanceOf[List[String]]
will
return true
. In the latter example, because the type argument is erased as part of compilation it is not
possible to check whether the contents of the list are of the requested typed.
true
if the receiver object is an instance of erasure of type T0
; false
otherwise.
Tests whether this linear sequence can be repeatedly traversed .
Tests whether this linear sequence can be repeatedly traversed .
true
Creates a new iterator over all elements contained in this iterable object .
Creates a new iterator over all elements contained in this iterable object .
the new iterator
Selects the last element .
Selects the last element .
the first element of this linear sequence .
[use case] Finds index of last occurrence of some value in this linear sequence before or at a given end index .
Finds index of last occurrence of some value in this linear sequence before or at a given end index .
the element value to search for .
the end index .
the index <= end
of the last element of this linear sequence that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of last occurrence of some value in this linear sequence before or at a given end index .
Finds index of last occurrence of some value in this linear sequence before or at a given end index .
the type of the element elem
.
the element value to search for .
the end index .
the index <= end
of the last element of this linear sequence that is equal (wrt ==
)
to elem
, or -1
, if none exists.
[use case] Finds index of last occurrence of some value in this linear sequence .
Finds index of last occurrence of some value in this linear sequence .
the element value to search for .
the index of the last element of this linear sequence that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of last occurrence of some value in this linear sequence .
Finds index of last occurrence of some value in this linear sequence .
Note: will not terminate for infinite-sized collections.
the type of the element elem
.
the element value to search for .
the index of the last element of this linear sequence that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds last index before or at a given end index where this linear sequence contains a given sequence as a slice .
Finds last index before or at a given end index where this linear sequence contains a given sequence as a slice .
the sequence to test
the end index
the last index <= end
such that the elements of this linear sequence starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds last index where this linear sequence contains a given sequence as a slice .
Finds last index where this linear sequence contains a given sequence as a slice .
Note: will not terminate for infinite-sized collections.
the sequence to test
the last index such that the elements of this linear sequence starting a this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index .
Finds index of last element satisfying some predicate before or at given end index .
the predicate used to test elements .
the index <= end
of the last element of this linear sequence that satisfies the predicate p
,
or -1
, if none exists.
Finds index of last element satisfying some predicate .
Finds index of last element satisfying some predicate .
Note: will not terminate for infinite-sized collections.
the predicate used to test elements .
the index of the last element of this linear sequence that satisfies the predicate p
,
or -1
, if none exists.
Optionally selects the last element .
Optionally selects the last element .
the last element of this linear sequence$ if it is nonempty, None
if it is empty.
The length of the linear sequence .
The length of the linear sequence .
Note: will not terminate for infinite-sized collections.
Note: xs.length
and xs.size
yield the same result.
the number of elements in this linear sequence .
Compares the length of this linear sequence to a test value .
Compares the length of this linear sequence to a test value .
the test value that gets compared with the length .
A value x
where
x < 0 if this.length < len
x == 0 if this.length == len
x > 0 if this.length > len
The method as implemented here does not call length
directly; its running time
is O(length min len)
instead of O(length)
. The method should be overwritten
if computing length
is cheap.
Turns this partial function into an plain function returning an Option
result.
Turns this partial function into an plain function returning an Option
result.
a function that takes an argument x
to Some(this(x))
if this
is defined for x
, and to None
otherwise.
[use case] Builds a new collection by applying a function to all elements of this linear sequence .
Builds a new collection by applying a function to all elements of this linear sequence .
the element type of the returned collection .
the function to apply to each element .
a new linear sequence resulting from applying the given function
f
to each element of this linear sequence and collecting the results.
Builds a new collection by applying a function to all elements of this linear sequence .
Builds a new collection by applying a function to all elements of this linear sequence .
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
resulting from applying the given function
f
to each element of this linear sequence and collecting the results.
[use case] Finds the largest element .
Finds the largest element .
the largest element of this linear sequence .
Finds the largest element .
Finds the largest element .
The type over which the ordering is defined .
An ordering to be used for comparing elements .
the largest element of this linear sequence with respect to the ordering cmp
.
[use case] Finds the smallest element .
Finds the smallest element .
the smallest element of this linear sequence
Finds the smallest element .
Finds the smallest element .
The type over which the ordering is defined .
An ordering to be used for comparing elements .
the smallest element of this linear sequence with respect to the ordering cmp
.
Displays all elements of this linear sequence in a string .
Displays all elements of this linear sequence in a string .
a string representation of this linear sequence. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this linear sequence follow each other without any separator string.
Displays all elements of this linear sequence in a string using a separator string .
Displays all elements of this linear sequence in a string using a separator string .
the separator string .
a string representation of this linear sequence. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this linear sequence are separated by the string sep
.
Displays all elements of this linear sequence in a string using start, end, and separator strings .
Displays all elements of this linear sequence in a string using start, end, and separator strings .
the starting string .
the separator string .
the ending string .
a string representation of this linear sequence. The resulting string
begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method toString
)
of all elements of this linear sequence are separated by the string sep
.
o.ne(arg0)
is the same as !(o.eq(arg0))
.
o.ne(arg0)
is the same as !(o.eq(arg0))
.
the object to compare against this object for reference dis-equality .
false
if the argument is not a reference to the receiver object; true
otherwise.
The builder that builds instances of type LinearSeq[A]
The builder that builds instances of type LinearSeq[A]
Tests whether the linear sequence is not empty .
Tests whether the linear sequence is not empty .
true
if the linear sequence contains at least one element, false
otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor .
Wakes up a single thread that is waiting on the receiver object's monitor .
Wakes up all threads that are waiting on the receiver object's monitor .
Wakes up all threads that are waiting on the receiver object's monitor .
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined .
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined .
the argument type of the fallback function
the result type of the fallback function
the fallback function
a partial function which has as domain the union of the domains
of this partial function and that
. The resulting partial function
takes x
to this(x)
where this
is defined, and to that(x)
where it is not.
[use case] Appends an element value to this linear sequence until a given target length is reached .
Appends an element value to this linear sequence until a given target length is reached .
the target length
the padding value
a new linear sequence consisting of
all elements of this linear sequence followed by the minimal number of occurrences of elem
so
that the resulting linear sequence has a length of at least len
.
Appends an element value to this linear sequence until a given target length is reached .
Appends an element value to this linear sequence until a given target length is reached .
the element type of the returned linear sequence .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the target length
the padding value
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
consisting of
all elements of this linear sequence followed by the minimal number of occurrences of elem
so
that the resulting collection has a length of at least len
.
Partitions this linear sequence in two linear sequences according to a predicate .
Partitions this linear sequence in two linear sequences according to a predicate .
the predicate on which to partition .
a pair of linear sequences: the first linear sequence consists of all elements that
satisfy the predicate p
and the second linear sequence consists of all elements
that don't. The relative order of the elements in the resulting linear sequences
is the same as in the original linear sequence.
[use case] Produces a new linear sequence where a slice of elements in this linear sequence is replaced by another sequence .
Produces a new linear sequence where a slice of elements in this linear sequence is replaced by another sequence .
the index of the first replaced element
the number of elements to drop in the original linear sequence
a new linear sequence consisting of all elements of this linear sequence
except that replaced
elements starting from from
are replaced
by patch
.
Produces a new linear sequence where a slice of elements in this linear sequence is replaced by another sequence .
Produces a new linear sequence where a slice of elements in this linear sequence is replaced by another sequence .
the element type of the returned linear sequence .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the index of the first replaced element
the replacement sequence
the number of elements to drop in the original linear sequence
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new linear sequence consisting of all elements of this linear sequence
except that replaced
elements starting from from
are replaced
by patch
.
Returns the length of the longest prefix whose elements all satisfy some predicate .
Returns the length of the longest prefix whose elements all satisfy some predicate .
Note: may not terminate for infinite-sized collections.
the predicate used to test elements .
the length of the longest prefix of this linear sequence
such that every element of the segment satisfies the predicate p
.
[use case] Multiplies up the elements of this collection .
Multiplies up the elements of this collection .
the product of all elements in this linear sequence of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the linear sequence and as result type of product
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Multiplies up the elements of this collection .
Multiplies up the elements of this collection .
the result type of the *
operator.
an implicit parameter defining a set of numeric operations
which includes the *
operator to be used in forming the product.
the product of all elements of this linear sequence with respect to the *
operator in num
.
returns a projection that can be used to call non-strict filter, map, and flatMap methods that build projections of the collection .
returns a projection that can be used to call non-strict filter, map, and flatMap methods that build projections of the collection .
use view' instead
Applies a binary operator to all elements of this linear sequence, going left to right .
Applies a binary operator to all elements of this linear sequence, going left to right .
Note: will not terminate for infinite-sized collections.
the result type of the binary operator .
the binary operator .
the result of inserting op
between consecutive elements of this linear sequence,
going left to right:
op(...(op(x_{1}, x_{2}), ... ) , x_{n})
where x,,1,,, ..., x,,n,,
are the elements of this linear sequence.
Optionally applies a binary operator to all elements of this linear sequence, going left to right .
Optionally applies a binary operator to all elements of this linear sequence, going left to right .
Note: will not terminate for infinite-sized collections.
the result type of the binary operator .
the binary operator .
an option value containing the result of reduceLeft(op)
is this linear sequence is nonempty,
None
otherwise.
Applies a binary operator to all elements of this linear sequence, going right to left .
Applies a binary operator to all elements of this linear sequence, going right to left .
Note: will not terminate for infinite-sized collections.
the result type of the binary operator .
the binary operator .
the result of inserting op
between consecutive elements of this linear sequence,
going right to left:
op(x_{1}, op(x_{2}, ..., op(x_{n-1}, x_{n})...))
where x,,1,,, ..., x,,n,,
are the elements of this linear sequence.
Optionally applies a binary operator to all elements of this linear sequence, going right to left .
Optionally applies a binary operator to all elements of this linear sequence, going right to left .
Note: will not terminate for infinite-sized collections.
the result type of the binary operator .
the binary operator .
an option value containing the result of reduceRight(op)
is this linear sequence is nonempty,
None
otherwise.
The collection of type linear sequence underlying this TraversableLike
object.
The collection of type linear sequence underlying this TraversableLike
object.
By default this is implemented as the TraversableLike
object itself, but this can be overridden.
Returns new linear sequence wih elements in reversed order .
Returns new linear sequence wih elements in reversed order .
Note: will not terminate for infinite-sized collections.
A new linear sequence with all elements of this linear sequence in reversed order .
An iterator yielding elements in reversed order .
An iterator yielding elements in reversed order .
Note: will not terminate for infinite-sized collections.
Note: xs.reverseIterator
is the same as xs.reverse.iterator
but might be more efficient.
an iterator yielding the elements of this linear sequence in reversed order
[use case] Builds a new collection by applying a function to all elements of this linear sequence and collecting the results in reversed order .
Builds a new collection by applying a function to all elements of this linear sequence and collecting the results in reversed order .
the element type of the returned collection .
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
the function to apply to each element .
a new linear sequence resulting from applying the given function
f
to each element of this linear sequence and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this linear sequence and collecting the results in reversed order .
Builds a new collection by applying a function to all elements of this linear sequence and collecting the results in reversed order .
Note: will not terminate for infinite-sized collections.
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
resulting from applying the given function
f
to each element of this linear sequence and collecting the results in reversed order.
use reverseIterator' instead
[use case] Checks if the other iterable collection contains the same elements in the same order as this linear sequence .
Checks if the other iterable collection contains the same elements in the same order as this linear sequence .
the collection to compare with .
true
, if both collections contain the same elements in the same order, false
otherwise.
Checks if the other iterable collection contains the same elements in the same order as this linear sequence .
Checks if the other iterable collection contains the same elements in the same order as this linear sequence .
Note: will not terminate for infinite-sized collections.
the type of the elements of collection that
.
the collection to compare with .
true
, if both collections contain the same elements in the same order, false
otherwise.
Produces a collection containing cummulative results of applying the operator going left to right .
Produces a collection containing cummulative results of applying the operator going left to right .
Note: will not terminate for infinite-sized collections.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
collection with intermediate results
Produces a collection containing cummulative results of applying the operator going right to left .
Produces a collection containing cummulative results of applying the operator going right to left .
Note: will not terminate for infinite-sized collections.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
collection with intermediate results
Computes length of longest segment whose elements all satisfy some predicate .
Computes length of longest segment whose elements all satisfy some predicate .
Note: may not terminate for infinite-sized collections.
the predicate used to test elements .
the index where the search starts .
the length of the longest segment of this linear sequence starting from index from
such that every element of the segment satisfies the predicate p
.
The size of this linear sequence, equivalent to length
.
The size of this linear sequence, equivalent to length
.
Note: will not terminate for infinite-sized [email protected] the number of elements in this linear sequence.
Selects an interval of elements .
Selects an interval of elements .
Note: c.slice(from, to)
is equivalent to (but possibly more efficient than)
c.drop(from).take(to - from)
the index of the first returned element in this linear sequence .
the index one past the last returned element in this linear sequence .
a linear sequence containing the elements starting at index from
and extending up to (but not including) index until
of this linear sequence.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped .
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped . )
the number of elements per group
An iterator producing linear sequences of size size
, except the
last will be truncated if the elements don't divide evenly.
Iterator#sliding
Sorts this LinearSeq according to the Ordering which results from transforming an implicitly given Ordering with a transformation function .
Sorts this LinearSeq according to the Ordering which results from transforming an implicitly given Ordering with a transformation function .
the target type of the transformation f
, and the type where
the ordering ord
is defined.
the transformation function mapping elements
to some other domain B
.
the ordering assumed on domain B
.
a linear sequence consisting of the elements of this linear sequence
sorted according to the ordering where x < y
if
ord.lt(f(x), f(y))
.
scala . math.Ordering
Note: will not terminate for infinite-sized collections.
Sorts this linear sequence according to a comparison function .
Sorts this linear sequence according to a comparison function .
Note: will not terminate for infinite-sized collections.
The sort is stable. That is, elements that are equal wrt lt
appear in the
same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering .
a linear sequence consisting of the elements of this linear sequence
sorted according to the comparison function lt
.
Sorts this linear sequence according to an Ordering .
Sorts this linear sequence according to an Ordering .
The sort is stable. That is, elements that are equal wrt lt
appear in the
same order in the sorted sequence as in the original.
the ordering to be used to compare elements .
a linear sequence consisting of the elements of this linear sequence
sorted according to the ordering ord
.
scala . math.Ordering
Splits this linear sequence into a prefix/suffix pair according to a predicate .
Splits this linear sequence into a prefix/suffix pair according to a predicate .
Note: c span p
is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p)
, provided the evaluation of the predicate p
does not cause any side-effects.
the test predicate
a pair consisting of the longest prefix of this linear sequence whose
elements all satisfy p
, and the rest of this linear sequence.
Splits this linear sequence into two at a given position .
Splits this linear sequence into two at a given position.
Note: c splitAt n
is equivalent to (but possibly more efficient than)
(c take n, c drop n)
.
the position at which to split .
a pair of linear sequences consisting of the first n
elements of this linear sequence, and the other elements.
Tests whether this linear sequence starts with the given sequence .
Tests whether this linear sequence starts with the given sequence .
the sequence to test
true
if this collection has that
as a prefix, false
otherwise.
Tests whether this linear sequence contains the given sequence at a given index .
Tests whether this linear sequence contains the given sequence at a given index .
If the both the receiver object, this and the argument, that are infinite sequences this method may not terminate.
the sequence to test
the index where the sequence is searched .
true
if the sequence that
is contained in this linear sequence at index offset
,
otherwise false
.
Defines the prefix of this object's toString
representation.
Defines the prefix of this object's toString
representation.
a string representation which starts the result of toString
applied to this linear sequence.
By default the string prefix is the simple name of the collection class linear sequence.
[use case] Sums up the elements of this collection .
Sums up the elements of this collection .
the sum of all elements in this linear sequence of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the linear sequence and as result type of sum
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Sums up the elements of this collection .
Sums up the elements of this collection .
the result type of the +
operator.
an implicit parameter defining a set of numeric operations
which includes the +
operator to be used in forming the sum.
the sum of all elements of this linear sequence with respect to the +
operator in num
.
Selects all elements except the first .
Selects all elements except the first .
a linear sequence consisting of all elements of this linear sequence except the first one .
Selects first n elements.
Selects first n elements.
Tt number of elements to take from this linear sequence .
a linear sequence consisting only of the first n
elements of this linear sequence, or else the
whole linear sequence, if it has less than n
elements.
Selects last n elements.
Selects last n elements.
the number of elements to take
a linear sequence consisting only of the last n
elements of this linear sequence, or else the
whole linear sequence, if it has less than n
elements.
Takes longest prefix of elements that satisfy a predicate .
Takes longest prefix of elements that satisfy a predicate .
The predicate used to test elements .
the longest prefix of this linear sequence whose elements all satisfy
the predicate p
.
The underlying collection seen as an instance of LinearSeq
.
The underlying collection seen as an instance of LinearSeq
.
By default this is implemented as the current collection object itself,
but this can be overridden.
[use case] Converts this linear sequence to an array .
Converts this linear sequence to an array .
Note: will not terminate for infinite-sized collections.
an array containing all elements of this linear sequence.
A ClassManifest
must be available for the element type of this linear sequence.
Converts this linear sequence to an array .
Converts this linear sequence to an array .
Note: will not terminate for infinite-sized collections.
the type of the elements of the array. A ClassManifest
for this type must
be available.
an array containing all elements of this linear sequence .
A conversion from collections of type Repr
to LinearSeq
objects.
A conversion from collections of type Repr
to LinearSeq
objects.
By default this is implemented as just a cast, but this can be overridden.
Converts this linear sequence to an indexed sequence .
Converts this linear sequence to an indexed sequence .
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this linear sequence .
Converts this linear sequence to an iterable collection .
Converts this linear sequence to an iterable collection .
Note: will not terminate for infinite-sized collections.
an Iterable
containing all elements of this linear sequence.
Returns an Iterator over the elements in this linear sequence .
Returns an Iterator over the elements in this linear sequence . Will return the same Iterator if this instance is already an Iterator.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this linear sequence .
Converts this linear sequence to a list .
Converts this linear sequence to a list .
Note: will not terminate for infinite-sized collections.
a list containing all elements of this linear sequence .
Converts this linear sequence to a map .
Converts this linear sequence to a map . This method is unavailable unless the elements are members of Tuple2, each ((K, V)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
Note: will not terminate for infinite-sized collections.
a map containing all elements of this linear sequence .
Converts this linear sequence to a sequence .
Converts this linear sequence to a sequence .
Note: will not terminate for infinite-sized collections.
Overridden for [email protected] a sequence containing all elements of this linear sequence.
Converts this linear sequence to a set .
Converts this linear sequence to a set .
Note: will not terminate for infinite-sized collections.
a set containing all elements of this linear sequence .
Converts this linear sequence to a stream .
Converts this linear sequence to a stream .
Note: will not terminate for infinite-sized collections.
a stream containing all elements of this linear sequence .
Converts this linear sequence to a string .
Converts this linear sequence to a string .
a string representation of this collection. By default this
string consists of the stringPrefix
of this linear sequence,
followed by all elements separated by commas and enclosed in parentheses.
Converts this linear sequence to an unspecified Traversable .
Converts this linear sequence to an unspecified Traversable . Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this linear sequence .
Transposes this linear sequence of traversable collections into a linear sequence of linear sequences .
Transposes this linear sequence of traversable collections into a linear sequence of linear sequences .
the type of the elements of each traversable collection .
an implicit conversion which asserts that the element type of this
linear sequence is a Traversable
.
a two-dimensional linear sequence of linear sequences which has as nth row the nth column of this linear sequence.
[use case] Produces a new sequence which contains all elements of this linear sequence and also all elements of a given sequence .
Produces a new sequence which contains all elements of this linear sequence and also all elements of
a given sequence. xs union ys
is equivalent to xs ++ ys
.
Note: will not terminate for infinite-sized collections.
the sequence to add .
a new linear sequence which contains all elements of this linear sequence
followed by all elements of that
.
Produces a new sequence which contains all elements of this linear sequence and also all elements of a given sequence .
Produces a new sequence which contains all elements of this linear sequence and also all elements of
a given sequence. xs union ys
is equivalent to xs ++ ys
.
Note: will not terminate for infinite-sized collections.
Another way to express this
is that xs union ys
computes the order-presevring multi-set union of xs
and ys
.
union
is hence a counter-part of diff
and intersect
which also work on multi-sets.
Note: will not terminate for infinite-sized collections.
the element type of the returned linear sequence .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the sequence to add .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
which contains all elements of this linear sequence
followed by all elements of that
.
Converts this linear sequence of pairs into two collections of the first and second halfs of each pair .
Converts this linear sequence of pairs into two collections of the first and second halfs of each pair .
an implicit conversion which asserts that the element type of this linear sequence is a pair .
a pair linear sequences, containing the first, respectively second half of each element pair of this linear sequence .
Replaces element at given index with a new value .
[use case] A copy of this linear sequence with one single replaced element .
A copy of this linear sequence with one single replaced element .
the position of the replacement
the replacing element
a copy of this linear sequence with the element at position index
replaced by elem
.
A copy of this linear sequence with one single replaced element .
A copy of this linear sequence with one single replaced element .
the element type of the returned linear sequence .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the position of the replacement
the replacing element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new linear sequence which is a copy of this linear sequence with the element at position
index replaced by
elem.
Creates a non-strict view of a slice of this linear sequence .
Creates a non-strict view of a slice of this linear sequence .
Note: the difference between view
and slice
is that view
produces
a view of the current linear sequence, whereas slice
produces a new linear sequence.
Note: view(from, to)
is equivalent to view.slice(from, to)
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this linear sequence, starting at index from
and extending up to (but not including) index until
.
Creates a non-strict view of this linear sequence .
Creates a non-strict view of this linear sequence .
a non-strict view of this linear sequence .
Creates a non-strict filter of this linear sequence .
Creates a non-strict filter of this linear sequence .
Note: the difference between c filter p
and c withFilter p
is that
the former creates a new collection, whereas the latter only restricts
the domain of subsequent map
, flatMap
, foreach
, and withFilter
operations.
the predicate used to test elements .
an object of class WithFilter
, which supports
map
, flatMap
, foreach
, and withFilter
operations.
All these operations apply to those elements of this linear sequence which
satisfy the predicate p
.
[use case] Returns a linear sequence formed from this linear sequence and another iterable collection by combining corresponding elements in pairs .
Returns a linear sequence formed from this linear sequence and another iterable collection by combining corresponding elements in pairs . If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new linear sequence containing pairs consisting of
corresponding elements of this linear sequence and that
. The length
of the returned collection is the minimum of the lengths of this linear sequence and that
.
Returns a linear sequence formed from this linear sequence and another iterable collection by combining corresponding elements in pairs .
Returns a linear sequence formed from this linear sequence and another iterable collection by combining corresponding elements in pairs . If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A
).
the type of the second half of the returned pairs
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type (A1, B)
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, B), That]
.
is found.
The iterable providing the second half of each result pair
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type (A1, B)
.
a new collection of type That
containing pairs consisting of
corresponding elements of this linear sequence and that
. The length
of the returned collection is the minimum of the lengths of this linear sequence and that
.
[use case] Returns a linear sequence formed from this linear sequence and another iterable collection by combining corresponding elements in pairs .
Returns a linear sequence formed from this linear sequence and another iterable collection by combining corresponding elements in pairs . If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this linear sequence is shorter than that
.
the element to be used to fill up the result if that
is shorter than this linear sequence.
a new linear sequence containing pairs consisting of
corresponding elements of this linear sequence and that
. The length
of the returned collection is the maximum of the lengths of this linear sequence and that
.
If this linear sequence is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this linear sequence, thatElem
values are used to pad the result.
Returns a linear sequence formed from this linear sequence and another iterable collection by combining corresponding elements in pairs .
Returns a linear sequence formed from this linear sequence and another iterable collection by combining corresponding elements in pairs . If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this linear sequence is shorter than that
.
the element to be used to fill up the result if that
is shorter than this linear sequence.
a new collection of type That
containing pairs consisting of
corresponding elements of this linear sequence and that
. The length
of the returned collection is the maximum of the lengths of this linear sequence and that
.
If this linear sequence is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this linear sequence, thatElem
values are used to pad the result.
[use case] Zips this linear sequence with its indices .
Zips this linear sequence with its indices .
A new linear sequence containing pairs consisting of all elements of this
linear sequence paired with their index. Indices start at 0
.
@example
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Zips this linear sequence with its indices .
Zips this linear sequence with its indices .
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A
).
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type (A1, Int)
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, Int), That]
.
is found.
A new collection of type That
containing pairs consisting of all elements of this
linear sequence paired with their index. Indices start at 0
.
A subtrait of
collection.LinearSeq
which represents sequences that can be mutated.Linear sequences are defined in terms of three abstract methods, which are assumed to have efficient implementations. These are:
Here,
A
is the type of the sequence elements andRepr
is the type of the sequence itself.Linear sequences do not add any new methods to
Seq
, but promise efficient implementations of linear access patterns.the element type of the linear sequence
version
2 . 8
since
2 . 8
authors:
Martin Odersky