The class of the iterator returned by the iterator
method.
The type implementing this traversable
A class supporting filtered operations .
o != arg0
is the same as !(o == (arg0))
.
o != arg0
is the same as !(o == (arg0))
.
the object to compare against this object for dis-equality .
false
if the receiver object is equivalent to the argument; true
otherwise.
[use case] Concatenates this range with the elements of a traversable collection .
Concatenates this range with the elements of a traversable collection .
the traversable to append .
a new range which contains all elements of this range
followed by all elements of that
.
Concatenates this range with the elements of a traversable collection .
Concatenates this range with the elements of a traversable collection .
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
which contains all elements of this range
followed by all elements of that
.
[use case] Prepends an element to this range
Prepends an element to this range
the prepended element
a new range consisting of elem
followed
by all elements of this range.
Prepends an element to this range
Prepends an element to this range
the element type of the returned range .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the prepended element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
consisting of elem
followed
by all elements of this range.
Applies a binary operator to a start value and all elements of this range, going left to right .
Applies a binary operator to a start value and all elements of this range, going left to right .
Note: /:
is alternate syntax for foldLeft
; z /: xs
is the same as xs foldLeft z
.
the result type of the binary operator .
the start value .
the binary operator .
the result of inserting op
between consecutive elements of this range,
going left to right with the start value z
on the left:
op(...op(op(z, x_{1}), x_{2}), ..., x_{n})
where x,,1,,, ..., x,,n,,
are the elements of this range.
[use case] Appends an element to this range
Appends an element to this range
the appended element
a new range consisting of
all elements of this range followed by elem
.
Appends an element to this range
Appends an element to this range
the element type of the returned range .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the appended element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
consisting of
all elements of this range followed by elem
.
Applies a binary operator to all elements of this range and a start value, going right to left .
Applies a binary operator to all elements of this range and a start value, going right to left .
Note: :\
is alternate syntax for foldRight
; xs :\ z
is the same as xs foldRight z
.
the result type of the binary operator .
the start value
the binary operator
the result of inserting op
between consecutive elements of this range,
going right to left with the start value z
on the right:
op(x_{1}, op(x_{2}, ... op(x_{n}, z)...))
where x,,1,,, ..., x,,n,,
are the elements of this range.
o == arg0
is the same as if (o eq null) arg0 eq null else o.equals(arg0)
.
o == arg0
is the same as if (o eq null) arg0 eq null else o.equals(arg0)
.
the object to compare against this object for equality .
true
if the receiver object is equivalent to the argument; false
otherwise.
o == arg0
is the same as o.equals(arg0)
.
o == arg0
is the same as o.equals(arg0)
.
the object to compare against this object for equality .
true
if the receiver object is equivalent to the argument; false
otherwise.
Appends all elements of this range to a string builder .
Appends all elements of this range to a string builder.
The written text consists of the string representations (w.r.t. the method toString
)
of all elements of this range without any separator string.
the string builder to which elements are appended .
the string builder b
to which elements were appended.
Appends all elements of this range to a string builder using a separator string .
Appends all elements of this range to a string builder using a separator string.
The written text consists of the string representations (w.r.t. the method toString
)
of all elements of this range, separated by the string sep
.
the string builder to which elements are appended .
the separator string .
the string builder b
to which elements were appended.
Appends all elements of this range to a string builder using start, end, and separator strings .
Appends all elements of this range to a string builder using start, end, and separator strings.
The written text begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method toString
)
of all elements of this range are separated by the string sep
.
the string builder to which elements are appended .
the starting string .
the separator string .
the ending string .
the string builder b
to which elements were appended.
Composes this partial function with a transformation function that gets applied to results of this partial function .
Composes this partial function with a transformation function that gets applied to results of this partial function .
the result type of the transformation function .
the transformation function
a partial function with the same domain as this partial function, which maps
arguments x
to k(this(x))
.
Selects an element by its index in the range .
This method is used to cast the receiver object to be of type T0
.
This method is used to cast the receiver object to be of type T0
.
Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression1.asInstanceOf[String]
will throw a ClassCastException
at runtime, while the expressionList(1).asInstanceOf[List[String]]
will not. In the latter example, because the type argument is erased as
part of compilation it is not possible to check whether the contents of the list are of the requested typed.
the receiver object .
Create a new range with the start
and end
values of this range and
a new step
.
Create a new range with the start
and end
values of this range and
a new step
.
a new range with a different step
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind .
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind .
The object with which this range should be compared
true
, if this range can possibly equal that
, false
otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
This method creates and returns a copy of the receiver object .
This method creates and returns a copy of the receiver object .
The default implementation of the clone
method is platform dependent.
a copy of the receiver object .
[use case] Builds a new collection by applying a partial function to all elements of this range on which the function is defined .
Builds a new collection by applying a partial function to all elements of this range on which the function is defined .
the element type of the returned collection .
the partial function which filters and maps the range .
a new range resulting from applying the given partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Builds a new collection by applying a partial function to all elements of this range on which the function is defined .
Builds a new collection by applying a partial function to all elements of this range on which the function is defined .
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the partial function which filters and maps the range .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
resulting from applying the partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
The factory companion object that builds instances of class Range .
The factory companion object that builds instances of class Range .
(f compose g)(x) == f(g(x))
(f compose g)(x) == f(g(x))
Tests whether this range contains a given value as an element .
Tests whether this range contains a given value as an element .
the element to test .
true
if this range has an element that is
is equal (wrt ==
) to elem
, false
otherwise.
Tests whether this range contains a given sequence as a slice .
Tests whether this range contains a given sequence as a slice .
the sequence to test
true
if this range contains a slice with the same elements
as that
, otherwise false
.
[use case] Copies elements of this range to an array .
Copies elements of this range to an array.
Fills the given array xs
with at most len
elements of
this range, starting at position start
.
Copying will stop once either the end of the current range is reached,
or the end of the array is reached, or len
elements have been copied.
the array to fill .
the starting index .
the maximal number of elements to copy .
Copies elements of this range to an array .
Copies elements of this range to an array.
Fills the given array xs
with at most len
elements of
this range, starting at position start
.
Copying will stop once either the end of the current range is reached,
or the end of the array is reached, or len
elements have been copied.
the type of the elements of the array .
the array to fill .
the starting index .
the maximal number of elements to copy .
[use case] Copies values of this range to an array .
Copies values of this range to an array.
Fills the given array xs
with values of this range.
Copying will stop once either the end of the current range is reached,
or the end of the array is reached.
the array to fill .
Copies values of this range to an array .
Copies values of this range to an array.
Fills the given array xs
with values of this range.
Copying will stop once either the end of the current range is reached,
or the end of the array is reached.
the type of the elements of the array .
the array to fill .
[use case] Copies values of this range to an array .
Copies values of this range to an array.
Fills the given array xs
with values of this range, after skipping start
values.
Copying will stop once either the end of the current range is reached,
or the end of the array is reached.
the array to fill .
the starting index .
Copies values of this range to an array .
Copies values of this range to an array.
Fills the given array xs
with values of this range, after skipping start
values.
Copying will stop once either the end of the current range is reached,
or the end of the array is reached.
the type of the elements of the array .
the array to fill .
the starting index .
Copies all elements of this range to a buffer .
Copies all elements of this range to a buffer .
The buffer to which elements are copied .
Tests whether every element of this range relates to the corresponding element of another sequence by satisfying a test predicate .
Tests whether every element of this range relates to the corresponding element of another sequence by satisfying a test predicate .
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true
if both sequences have the same length and
p(x, y)
is true
for all corresponding elements x
of this range
and y
of that
, otherwise false
.
Counts the number of elements in the range which satisfy a predicate .
Counts the number of elements in the range which satisfy a predicate .
the predicate used to test elements .
the number of elements satisfying the predicate p
.
[use case] Computes the multiset difference between this range and another sequence .
Computes the multiset difference between this range and another sequence .
the sequence of elements to remove
a new range which contains all elements of this range
except some of occurrences of elements that also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will not form
part of the result, but any following occurrences will.
Computes the multiset difference between this range and another sequence .
Computes the multiset difference between this range and another sequence .
the element type of the returned range .
the sequence of elements to remove
a new collection of type That
which contains all elements of this range
except some of occurrences of elements that also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will not form
part of the result, but any following occurrences will.
Builds a new range from this range without any duplicate elements .
Builds a new range from this range without any duplicate elements .
A new range which contains the first occurrence of every element of this range .
Creates a new range containing all the elements of this range except the first n
elements.
Creates a new range containing all the elements of this range except the first n
elements.
Note: this method does not use builders to construct a new range, and its complexity is O(1).
the number of elements to drop .
a new range consisting of all the elements of this range except n
first elements.
Creates a new range consisting of the initial length - n
elements of the range.
Creates a new range consisting of the initial length - n
elements of the range.
Note: this method does not use builders to construct a new range, and its complexity is O(1)[email protected] n The number of elements to take
a range consisting of all elements of this range except the first n
ones, or else the
empty range, if this range has less than n
elements.
Drops longest prefix of elements that satisfy a predicate .
Drops longest prefix of elements that satisfy a predicate .
The predicate used to test elements .
the longest suffix of this range whose first element
does not satisfy the predicate p
.
use iterator' instead
Tests whether this range ends with the given sequence .
Tests whether this range ends with the given sequence .
the sequence to test
true
if this range has that
as a suffix, false
otherwise.
This method is used to test whether the argument (arg0
) is a reference to the
receiver object (this
).
This method is used to test whether the argument (arg0
) is a reference to the
receiver object (this
).
The eq
method implements an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence relation] on
non-null instances of AnyRef
:
* It is reflexive: for any non-null instance x
of type AnyRef
, x.eq(x)
returns true
.
* It is symmetric: for any non-null instances x
and y
of type AnyRef
, x.eq(y)
returns true
if and
only if y.eq(x)
returns true
.
* It is transitive: for any non-null instances x
, y
, and z
of type AnyRef
if x.eq(y)
returns true
and y.eq(z)
returns true
, then x.eq(z)
returns true
.
Additionally, the eq
method has three other properties.
* It is consistent: for any non-null instances x
and y
of type AnyRef
, multiple invocations of
x.eq(y)
consistently returns true
or consistently returns false
.
* For any non-null instance x
of type AnyRef
, x.eq(null)
and null.eq(x)
returns false
.
* null.eq(null)
returns true
.
When overriding the equals
or hashCode
methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2
), they
should be equal to each other (o1 == o2
) and they should hash to the same value (o1.hashCode == o2.hashCode
).
the object to compare against this object for reference equality .
true
if the argument is a reference to the receiver object; false
otherwise.
The equality method defined in AnyRef
.
The equality method defined in AnyRef
[email protected] true
if the receiver object is equivalent to the argument; false
otherwise. */
Tests whether every element of this range relates to the corresponding element of another sequence by satisfying a test predicate .
Tests whether every element of this range relates to the corresponding element of another sequence by satisfying a test predicate .
the type of the elements of that
the other sequence
true
if both sequences have the same length and
p(x, y)
is true
for all corresponding elements x
of this range
and y
of that
, otherwise false
.
use corresponds
instead
Tests whether a predicate holds for some of the elements of this range .
Tests whether a predicate holds for some of the elements of this range .
the predicate used to test elements .
true
if the given predicate p
holds for some of the elements
of this range, otherwise false
.
Selects all elements of this range which satisfy a predicate .
Selects all elements of this range which satisfy a predicate .
the predicate used to test elements .
a new range consisting of all elements of this range that satisfy the given
predicate p
. The order of the elements is preserved.
Selects all elements of this range which do not satisfy a predicate .
Selects all elements of this range which do not satisfy a predicate .
the predicate used to test elements .
a new range consisting of all elements of this range that do not satisfy the given
predicate p
. The order of the elements is preserved.
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object .
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object .
The details of when and if the finalize
method are invoked, as well as the interaction between finalize
and non-local returns and exceptions, are all platform dependent.
Finds the first element of the range satisfying a predicate, if any .
Finds the first element of the range satisfying a predicate, if any .
the predicate used to test elements .
an option value containing the first element in the range
that satisfies p
, or None
if none exists.
Returns index of the first element satisfying a predicate, or -1
.
Returns index of the first element satisfying a predicate, or -1
.
Returns index of the last element satisfying a predicate, or -1 .
Returns index of the last element satisfying a predicate, or -1 .
use lastIndexWhere
instead
use head' instead
None
if iterable is empty.
[use case] Builds a new collection by applying a function to all elements of this range and concatenating the results .
Builds a new collection by applying a function to all elements of this range and concatenating the results .
the element type of the returned collection .
the function to apply to each element .
a new range resulting from applying the given collection-valued function
f
to each element of this range and concatenating the results.
Builds a new collection by applying a function to all elements of this range and concatenating the results .
Builds a new collection by applying a function to all elements of this range and concatenating the results .
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
resulting from applying the given collection-valued function
f
to each element of this range and concatenating the results.
[use case] Converts this range of traversable collections into a range in which all element collections are concatenated .
Converts this range of traversable collections into a range in which all element collections are concatenated .
the type of the elements of each traversable collection .
a new range resulting from concatenating all element ranges .
Converts this range of traversable collections into a range in which all element collections are concatenated .
Converts this range of traversable collections into a range in which all element collections are concatenated .
the type of the elements of each traversable collection .
an implicit conversion which asserts that the element type of this
range is a Traversable
.
a new range resulting from concatenating all element ranges .
Applies a binary operator to a start value and all elements of this range, going left to right .
Applies a binary operator to a start value and all elements of this range, going left to right .
the result type of the binary operator .
the start value .
the binary operator .
the result of inserting op
between consecutive elements of this range,
going left to right with the start value z
on the left:
op(...op(z, x_{1}), x_{2}, ..., x_{n})
where x,,1,,, ..., x,,n,,
are the elements of this range.
Applies a binary operator to all elements of this range and a start value, going right to left .
Applies a binary operator to all elements of this range and a start value, going right to left .
the result type of the binary operator .
the start value .
the binary operator .
the result of inserting op
between consecutive elements of this range,
going right to left with the start value z
on the right:
op(x_{1}, op(x_{2}, ... op(x_{n}, z)...))
where x,,1,,, ..., x,,n,,
are the elements of this range.
Tests whether a predicate holds for all elements of this range .
Tests whether a predicate holds for all elements of this range .
the predicate used to test elements .
true
if the given predicate p
holds for all elements
of this range, otherwise false
.
[use case] Applies a function f
to all elements of this range.
Applies a function f
to all elements of this range.
the function that is applied for its side-effect to every element.
The result of function f
is discarded.
Applies a function f
to all elements of this range.
Applies a function f
to all elements of this range.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the type parameter describing the result of function f
.
This result will always be ignored. Typically U
is Unit
,
but this is not necessary.
the function that is applied for its side-effect to every element.
The result of function f
is discarded.
The generic builder that builds instances of Range at arbitrary element types .
The generic builder that builds instances of Range at arbitrary element types .
Returns a representation that corresponds to the dynamic class of the receiver object .
Returns a representation that corresponds to the dynamic class of the receiver object .
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object .
Partitions this range into a map of ranges according to some discriminator function .
Partitions this range into a map of ranges according to some discriminator function .
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new range.
the type of keys returned by the discriminator function .
the discriminator function .
A map from keys to ranges such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k)
That is, every key k
is bound to a range of those elements x
for which f(x)
equals k
.
Partitions elements in fixed size ranges .
Partitions elements in fixed size ranges .
the number of elements per group
An iterator producing ranges of size size
, except the
last will be truncated if the elements don't divide evenly.
Iterator#grouped
Tests whether this range is known to have a finite size .
Tests whether this range is known to have a finite size.
All strict collections are known to have finite size. For a non-strict collection
such as Stream
, the predicate returns true
if all elements have been computed.
It returns false
if the stream is not yet evaluated to the end.
Note: many collection methods will not work on collections of infinite sizes.
true
if this collection is known to have finite size, false
otherwise.
Hashcodes for Range produce a value from the hashcodes of all the elements of the range .
Hashcodes for Range produce a value from the hashcodes of all the elements of the range . @return the hash code value for the object. */
Selects the first element of this range .
Selects the first element of this range .
the first element of this range .
Optionally selects the first element .
Optionally selects the first element .
the first element of this range if it is nonempty, None
if it is empty.
Make range inclusive .
Make range inclusive .
[use case] Finds index of first occurrence of some value in this range after or at some start index .
Finds index of first occurrence of some value in this range after or at some start index .
the element value to search for .
the start index
the index >= from
of the first element of this range that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of first occurrence of some value in this range after or at some start index .
Finds index of first occurrence of some value in this range after or at some start index .
the type of the element elem
.
the element value to search for .
the start index
the index >= from
of the first element of this range that is equal (wrt ==
)
to elem
, or -1
, if none exists.
[use case] Finds index of first occurrence of some value in this range .
Finds index of first occurrence of some value in this range .
the element value to search for .
the index of the first element of this range that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of first occurrence of some value in this range .
Finds index of first occurrence of some value in this range .
the type of the element elem
.
the element value to search for .
the index of the first element of this range that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds first index after or at a start index where this range contains a given sequence as a slice .
Finds first index after or at a start index where this range contains a given sequence as a slice .
the sequence to test
the start index
the first index >= from
such that the elements of this range starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds first index where this range contains a given sequence as a slice .
Finds first index where this range contains a given sequence as a slice .
the sequence to test
the first index such that the elements of this range starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index .
Finds index of the first element satisfying some predicate after or at some start index .
the predicate used to test elements .
the start index
the index >= from
of the first element of this range that satisfies the predicate p
,
or -1
, if none exists.
Finds index of first element satisfying some predicate .
Finds index of first element satisfying some predicate .
the predicate used to test elements .
the index of the first element of this range that satisfies the predicate p
,
or -1
, if none exists.
Produces the range of all indices of this sequence .
Produces the range of all indices of this sequence .
a Range
value from 0
to one less than the length of this range.
Creates a new range containing all the elements of this range except the last one .
Creates a new range containing all the elements of this range except the last one .
Note: this method does not use builders to construct a new range, and its complexity is O(1).
a new range consisting of all the elements of this range except the last one .
[use case] Computes the multiset intersection between this range and another sequence .
Computes the multiset intersection between this range and another sequence .
the sequence of elements to intersect with .
a new range which contains all elements of this range
which also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will be retained
in the result, but any following occurrences will be omitted.
Computes the multiset intersection between this range and another sequence .
Computes the multiset intersection between this range and another sequence .
the element type of the returned range .
the sequence of elements to intersect with .
a new collection of type That
which contains all elements of this range
which also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will be retained
in the result, but any following occurrences will be omitted.
Tests whether this range contains given index .
Tests whether this range contains given index .
The implementations of methods apply
and isDefinedAt
turn a Seq[A]
into
a PartialFunction[Int, A]
.
the index to test
true
if this range contains an element at position idx
, false
otherwise.
Tests whether this range is empty .
Tests whether this range is empty .
true
if the range contain no elements, false
otherwise.
This method is used to test whether the dynamic type of the receiver object is T0
.
This method is used to test whether the dynamic type of the receiver object is T0
.
Note that the test result of the test is modulo Scala's erasure semantics. Therefore the expression1.isInstanceOf[String]
will return false
, while the expression List(1).isInstanceOf[List[String]]
will
return true
. In the latter example, because the type argument is erased as part of compilation it is not
possible to check whether the contents of the list are of the requested typed.
true
if the receiver object is an instance of erasure of type T0
; false
otherwise.
Tests whether this range can be repeatedly traversed .
Tests whether this range can be repeatedly traversed .
true
Creates a new iterator over all elements contained in this iterable object .
Creates a new iterator over all elements contained in this iterable object .
the new iterator
Selects the last element .
Selects the last element .
the first element of this range .
[use case] Finds index of last occurrence of some value in this range before or at a given end index .
Finds index of last occurrence of some value in this range before or at a given end index .
the element value to search for .
the end index .
the index <= end
of the last element of this range that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of last occurrence of some value in this range before or at a given end index .
Finds index of last occurrence of some value in this range before or at a given end index .
the type of the element elem
.
the element value to search for .
the end index .
the index <= end
of the last element of this range that is equal (wrt ==
)
to elem
, or -1
, if none exists.
[use case] Finds index of last occurrence of some value in this range .
Finds index of last occurrence of some value in this range .
the element value to search for .
the index of the last element of this range that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of last occurrence of some value in this range .
Finds index of last occurrence of some value in this range .
the type of the element elem
.
the element value to search for .
the index of the last element of this range that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds last index before or at a given end index where this range contains a given sequence as a slice .
Finds last index before or at a given end index where this range contains a given sequence as a slice .
the sequence to test
the end index
the last index <= end
such that the elements of this range starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds last index where this range contains a given sequence as a slice .
Finds last index where this range contains a given sequence as a slice .
the sequence to test
the last index such that the elements of this range starting a this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index .
Finds index of last element satisfying some predicate before or at given end index .
the predicate used to test elements .
the index <= end
of the last element of this range that satisfies the predicate p
,
or -1
, if none exists.
Finds index of last element satisfying some predicate .
Finds index of last element satisfying some predicate .
the predicate used to test elements .
the index of the last element of this range that satisfies the predicate p
,
or -1
, if none exists.
Optionally selects the last element .
Optionally selects the last element .
the last element of this range$ if it is nonempty, None
if it is empty.
The length of the range .
Compares the length of this range to a test value .
Compares the length of this range to a test value .
the test value that gets compared with the length .
A value x
where
x < 0 if this.length < len
x == 0 if this.length == len
x > 0 if this.length > len
The method as implemented here does not call length
directly; its running time
is O(length min len)
instead of O(length)
. The method should be overwritten
if computing length
is cheap.
Turns this partial function into an plain function returning an Option
result.
Turns this partial function into an plain function returning an Option
result.
a function that takes an argument x
to Some(this(x))
if this
is defined for x
, and to None
otherwise.
[use case] Builds a new collection by applying a function to all elements of this range .
Builds a new collection by applying a function to all elements of this range .
the element type of the returned collection .
the function to apply to each element .
a new range resulting from applying the given function
f
to each element of this range and collecting the results.
Builds a new collection by applying a function to all elements of this range .
Builds a new collection by applying a function to all elements of this range .
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
resulting from applying the given function
f
to each element of this range and collecting the results.
[use case] Finds the largest element .
Finds the largest element .
the largest element of this range .
Finds the largest element .
Finds the largest element .
The type over which the ordering is defined .
An ordering to be used for comparing elements .
the largest element of this range with respect to the ordering cmp
.
[use case] Finds the smallest element .
Finds the smallest element .
the smallest element of this range
Finds the smallest element .
Finds the smallest element .
The type over which the ordering is defined .
An ordering to be used for comparing elements .
the smallest element of this range with respect to the ordering cmp
.
Displays all elements of this range in a string .
Displays all elements of this range in a string .
a string representation of this range. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this range follow each other without any separator string.
Displays all elements of this range in a string using a separator string .
Displays all elements of this range in a string using a separator string .
the separator string .
a string representation of this range. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this range are separated by the string sep
.
Displays all elements of this range in a string using start, end, and separator strings .
Displays all elements of this range in a string using start, end, and separator strings .
the starting string .
the separator string .
the ending string .
a string representation of this range. The resulting string
begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method toString
)
of all elements of this range are separated by the string sep
.
o.ne(arg0)
is the same as !(o.eq(arg0))
.
o.ne(arg0)
is the same as !(o.eq(arg0))
.
the object to compare against this object for reference dis-equality .
false
if the argument is not a reference to the receiver object; true
otherwise.
The builder that builds instances of type Range[A]
The builder that builds instances of type Range[A]
Tests whether the range is not empty .
Tests whether the range is not empty .
true
if the range contains at least one element, false
otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor .
Wakes up a single thread that is waiting on the receiver object's monitor .
Wakes up all threads that are waiting on the receiver object's monitor .
Wakes up all threads that are waiting on the receiver object's monitor .
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined .
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined .
the argument type of the fallback function
the result type of the fallback function
the fallback function
a partial function which has as domain the union of the domains
of this partial function and that
. The resulting partial function
takes x
to this(x)
where this
is defined, and to that(x)
where it is not.
[use case] Appends an element value to this range until a given target length is reached .
Appends an element value to this range until a given target length is reached .
the target length
the padding value
a new range consisting of
all elements of this range followed by the minimal number of occurrences of elem
so
that the resulting range has a length of at least len
.
Appends an element value to this range until a given target length is reached .
Appends an element value to this range until a given target length is reached .
the element type of the returned range .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the target length
the padding value
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
consisting of
all elements of this range followed by the minimal number of occurrences of elem
so
that the resulting collection has a length of at least len
.
Partitions this range in two ranges according to a predicate .
Partitions this range in two ranges according to a predicate .
the predicate on which to partition .
a pair of ranges: the first range consists of all elements that
satisfy the predicate p
and the second range consists of all elements
that don't. The relative order of the elements in the resulting ranges
is the same as in the original range.
[use case] Produces a new range where a slice of elements in this range is replaced by another sequence .
Produces a new range where a slice of elements in this range is replaced by another sequence .
the index of the first replaced element
the number of elements to drop in the original range
a new range consisting of all elements of this range
except that replaced
elements starting from from
are replaced
by patch
.
Produces a new range where a slice of elements in this range is replaced by another sequence .
Produces a new range where a slice of elements in this range is replaced by another sequence .
the element type of the returned range .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the index of the first replaced element
the replacement sequence
the number of elements to drop in the original range
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new range consisting of all elements of this range
except that replaced
elements starting from from
are replaced
by patch
.
Returns the length of the longest prefix whose elements all satisfy some predicate .
Returns the length of the longest prefix whose elements all satisfy some predicate .
the predicate used to test elements .
the length of the longest prefix of this range
such that every element of the segment satisfies the predicate p
.
[use case] Multiplies up the elements of this collection .
Multiplies up the elements of this collection .
the product of all elements in this range of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the range and as result type of product
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Multiplies up the elements of this collection .
Multiplies up the elements of this collection .
the result type of the *
operator.
an implicit parameter defining a set of numeric operations
which includes the *
operator to be used in forming the product.
the product of all elements of this range with respect to the *
operator in num
.
returns a projection that can be used to call non-strict filter, map, and flatMap methods that build projections of the collection .
returns a projection that can be used to call non-strict filter, map, and flatMap methods that build projections of the collection .
use view' instead
Applies a binary operator to all elements of this range, going left to right .
Applies a binary operator to all elements of this range, going left to right .
the result type of the binary operator .
the binary operator .
the result of inserting op
between consecutive elements of this range,
going left to right:
op(...(op(x_{1}, x_{2}), ... ) , x_{n})
where x,,1,,, ..., x,,n,,
are the elements of this range.
Optionally applies a binary operator to all elements of this range, going left to right .
Optionally applies a binary operator to all elements of this range, going left to right .
the result type of the binary operator .
the binary operator .
an option value containing the result of reduceLeft(op)
is this range is nonempty,
None
otherwise.
Applies a binary operator to all elements of this range, going right to left .
Applies a binary operator to all elements of this range, going right to left .
the result type of the binary operator .
the binary operator .
the result of inserting op
between consecutive elements of this range,
going right to left:
op(x_{1}, op(x_{2}, ..., op(x_{n-1}, x_{n})...))
where x,,1,,, ..., x,,n,,
are the elements of this range.
Optionally applies a binary operator to all elements of this range, going right to left .
Optionally applies a binary operator to all elements of this range, going right to left .
the result type of the binary operator .
the binary operator .
an option value containing the result of reduceRight(op)
is this range is nonempty,
None
otherwise.
The collection of type range underlying this TraversableLike
object.
The collection of type range underlying this TraversableLike
object.
By default this is implemented as the TraversableLike
object itself, but this can be overridden.
Returns the reverse of this range .
Returns the reverse of this range .
Note: this method does not use builders to construct a new range, and its complexity is O(1)[email protected] A new range with all elements of this range in reversed order.
An iterator yielding elements in reversed order .
An iterator yielding elements in reversed order .
Note: xs.reverseIterator
is the same as xs.reverse.iterator
but might be more efficient.
an iterator yielding the elements of this range in reversed order
[use case] Builds a new collection by applying a function to all elements of this range and collecting the results in reversed order .
Builds a new collection by applying a function to all elements of this range and collecting the results in reversed order .
the element type of the returned collection .
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
the function to apply to each element .
a new range resulting from applying the given function
f
to each element of this range and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this range and collecting the results in reversed order .
Builds a new collection by applying a function to all elements of this range and collecting the results in reversed order .
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
the element type of the returned collection .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
resulting from applying the given function
f
to each element of this range and collecting the results in reversed order.
use reverseIterator' instead
[use case] Checks if the other iterable collection contains the same elements in the same order as this range .
Checks if the other iterable collection contains the same elements in the same order as this range .
the collection to compare with .
true
, if both collections contain the same elements in the same order, false
otherwise.
Checks if the other iterable collection contains the same elements in the same order as this range .
Checks if the other iterable collection contains the same elements in the same order as this range .
the type of the elements of collection that
.
the collection to compare with .
true
, if both collections contain the same elements in the same order, false
otherwise.
Produces a collection containing cummulative results of applying the operator going left to right .
Produces a collection containing cummulative results of applying the operator going left to right .
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
collection with intermediate results
Produces a collection containing cummulative results of applying the operator going right to left .
Produces a collection containing cummulative results of applying the operator going right to left .
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
collection with intermediate results
Computes length of longest segment whose elements all satisfy some predicate .
Computes length of longest segment whose elements all satisfy some predicate .
the predicate used to test elements .
the index where the search starts .
the length of the longest segment of this range starting from index from
such that every element of the segment satisfies the predicate p
.
The size of this range, equivalent to length
.
The size of this range, equivalent to length
.
the number of elements in this range .
Creates a new range contained in the specified slice of this range .
Creates a new range contained in the specified slice of this range .
Note: this method does not use builders to construct a new range, and its complexity is O(1).
the start of the slice .
the end of the slice .
a new range consisting of all the elements of this range contained in the specified slice .
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped .
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped . )
the number of elements per group
An iterator producing ranges of size size
, except the
last will be truncated if the elements don't divide evenly.
Iterator#sliding
Sorts this Range according to the Ordering which results from transforming an implicitly given Ordering with a transformation function .
Sorts this Range according to the Ordering which results from transforming an implicitly given Ordering with a transformation function .
the target type of the transformation f
, and the type where
the ordering ord
is defined.
the transformation function mapping elements
to some other domain B
.
the ordering assumed on domain B
.
a range consisting of the elements of this range
sorted according to the ordering where x < y
if
ord.lt(f(x), f(y))
.
scala . math.Ordering
Sorts this range according to a comparison function .
Sorts this range according to a comparison function .
The sort is stable. That is, elements that are equal wrt lt
appear in the
same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering .
a range consisting of the elements of this range
sorted according to the comparison function lt
.
Sorts this range according to an Ordering .
Sorts this range according to an Ordering .
The sort is stable. That is, elements that are equal wrt lt
appear in the
same order in the sorted sequence as in the original.
the ordering to be used to compare elements .
a range consisting of the elements of this range
sorted according to the ordering ord
.
scala . math.Ordering
Splits this range into a prefix/suffix pair according to a predicate .
Splits this range into a prefix/suffix pair according to a predicate .
Note: c span p
is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p)
, provided the evaluation of the predicate p
does not cause any side-effects.
the test predicate
a pair consisting of the longest prefix of this range whose
elements all satisfy p
, and the rest of this range.
Creates a pair of new ranges, first consisting of elements before n
, and the second
of elements after n
.
Creates a pair of new ranges, first consisting of elements before n
, and the second
of elements after n
.
Note: this method does not use builders to construct a new range, and its complexity is O(1)[email protected] n the position at which to split.
a pair of ranges consisting of the first n
elements of this range, and the other elements.
Tests whether this range starts with the given sequence .
Tests whether this range starts with the given sequence .
the sequence to test
true
if this collection has that
as a prefix, false
otherwise.
Tests whether this range contains the given sequence at a given index .
Tests whether this range contains the given sequence at a given index .
If the both the receiver object, this and the argument, that are infinite sequences this method may not terminate.
the sequence to test
the index where the sequence is searched .
true
if the sequence that
is contained in this range at index offset
,
otherwise false
.
Defines the prefix of this object's toString
representation.
Defines the prefix of this object's toString
representation.
a string representation which starts the result of toString
applied to this range.
By default the string prefix is the simple name of the collection class range.
[use case] Sums up the elements of this collection .
Sums up the elements of this collection .
the sum of all elements in this range of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the range and as result type of sum
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Sums up the elements of this collection .
Sums up the elements of this collection .
the result type of the +
operator.
an implicit parameter defining a set of numeric operations
which includes the +
operator to be used in forming the sum.
the sum of all elements of this range with respect to the +
operator in num
.
Selects all elements except the first .
Selects all elements except the first .
a range consisting of all elements of this range except the first one .
Creates a new range containing the first n
elements of this range.
Creates a new range containing the first n
elements of this range.
Note: this method does not use builders to construct a new range, and its complexity is O(1).
the number of elements to take .
a new range consisting of n
first elements.
Creates a new range consisting of the length - n
last elements of the range.
Creates a new range consisting of the length - n
last elements of the range.
Note: this method does not use builders to construct a new range, and its complexity is O(1)[email protected] n the number of elements to take
a range consisting only of the last n
elements of this range, or else the
whole range, if it has less than n
elements.
Takes longest prefix of elements that satisfy a predicate .
Takes longest prefix of elements that satisfy a predicate .
The predicate used to test elements .
the longest prefix of this range whose elements all satisfy
the predicate p
.
The underlying collection seen as an instance of Range
.
The underlying collection seen as an instance of Range
.
By default this is implemented as the current collection object itself,
but this can be overridden.
[use case] Converts this range to an array .
Converts this range to an array .
an array containing all elements of this range.
A ClassManifest
must be available for the element type of this range.
Converts this range to an array .
Converts this range to an array .
the type of the elements of the array. A ClassManifest
for this type must
be available.
an array containing all elements of this range .
A conversion from collections of type Repr
to Range
objects.
A conversion from collections of type Repr
to Range
objects.
By default this is implemented as just a cast, but this can be overridden.
Converts this range to an indexed sequence .
Converts this range to an indexed sequence .
an indexed sequence containing all elements of this range .
Converts this range to an iterable collection .
Converts this range to an iterable collection .
an Iterable
containing all elements of this range.
Returns an Iterator over the elements in this range .
Returns an Iterator over the elements in this range . Will return the same Iterator if this instance is already an Iterator.
an Iterator containing all elements of this range .
Converts this range to a list .
Converts this range to a list .
a list containing all elements of this range .
Converts this range to a map .
Converts this range to a map . This method is unavailable unless the elements are members of Tuple2, each ((K, V)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map containing all elements of this range .
Converts this range to a sequence .
Converts this range to a sequence .
Overridden for [email protected] a sequence containing all elements of this range.
Converts this range to a set .
Converts this range to a set .
a set containing all elements of this range .
Converts this range to a stream .
Converts this range to a stream .
a stream containing all elements of this range .
Converts this range to a string .
Converts this range to a string .
a string representation of this collection. By default this
string consists of the stringPrefix
of this range,
followed by all elements separated by commas and enclosed in parentheses.
Converts this range to an unspecified Traversable .
Converts this range to an unspecified Traversable . Will return the same collection if this instance is already Traversable.
a Traversable containing all elements of this range .
Transposes this range of traversable collections into a range of ranges .
Transposes this range of traversable collections into a range of ranges .
the type of the elements of each traversable collection .
an implicit conversion which asserts that the element type of this
range is a Traversable
.
a two-dimensional range of ranges which has as nth row the nth column of this range.
[use case] Produces a new sequence which contains all elements of this range and also all elements of a given sequence .
Produces a new sequence which contains all elements of this range and also all elements of
a given sequence. xs union ys
is equivalent to xs ++ ys
.
the sequence to add .
a new range which contains all elements of this range
followed by all elements of that
.
Produces a new sequence which contains all elements of this range and also all elements of a given sequence .
Produces a new sequence which contains all elements of this range and also all elements of
a given sequence. xs union ys
is equivalent to xs ++ ys
.
Another way to express this
is that xs union ys
computes the order-presevring multi-set union of xs
and ys
.
union
is hence a counter-part of diff
and intersect
which also work on multi-sets.
the element type of the returned range .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the sequence to add .
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new collection of type That
which contains all elements of this range
followed by all elements of that
.
Converts this range of pairs into two collections of the first and second halfs of each pair .
Converts this range of pairs into two collections of the first and second halfs of each pair .
an implicit conversion which asserts that the element type of this range is a pair .
a pair ranges, containing the first, respectively second half of each element pair of this range .
[use case] A copy of this range with one single replaced element .
A copy of this range with one single replaced element .
the position of the replacement
the replacing element
a copy of this range with the element at position index
replaced by elem
.
A copy of this range with one single replaced element .
A copy of this range with one single replaced element .
the element type of the returned range .
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the position of the replacement
the replacing element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
.
a new range which is a copy of this range with the element at position
index replaced by
elem.
Creates a non-strict view of a slice of this range .
Creates a non-strict view of a slice of this range .
Note: the difference between view
and slice
is that view
produces
a view of the current range, whereas slice
produces a new range.
Note: view(from, to)
is equivalent to view.slice(from, to)
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this range, starting at index from
and extending up to (but not including) index until
.
Creates a non-strict view of this range .
Creates a non-strict view of this range .
a non-strict view of this range .
Creates a non-strict filter of this range .
Creates a non-strict filter of this range .
Note: the difference between c filter p
and c withFilter p
is that
the former creates a new collection, whereas the latter only restricts
the domain of subsequent map
, flatMap
, foreach
, and withFilter
operations.
the predicate used to test elements .
an object of class WithFilter
, which supports
map
, flatMap
, foreach
, and withFilter
operations.
All these operations apply to those elements of this range which
satisfy the predicate p
.
[use case] Returns a range formed from this range and another iterable collection by combining corresponding elements in pairs .
Returns a range formed from this range and another iterable collection by combining corresponding elements in pairs . If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new range containing pairs consisting of
corresponding elements of this range and that
. The length
of the returned collection is the minimum of the lengths of this range and that
.
Returns a range formed from this range and another iterable collection by combining corresponding elements in pairs .
Returns a range formed from this range and another iterable collection by combining corresponding elements in pairs . If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A
).
the type of the second half of the returned pairs
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type (A1, B)
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, B), That]
.
is found.
The iterable providing the second half of each result pair
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type (A1, B)
.
a new collection of type That
containing pairs consisting of
corresponding elements of this range and that
. The length
of the returned collection is the minimum of the lengths of this range and that
.
[use case] Returns a range formed from this range and another iterable collection by combining corresponding elements in pairs .
Returns a range formed from this range and another iterable collection by combining corresponding elements in pairs . If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this range is shorter than that
.
the element to be used to fill up the result if that
is shorter than this range.
a new range containing pairs consisting of
corresponding elements of this range and that
. The length
of the returned collection is the maximum of the lengths of this range and that
.
If this range is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this range, thatElem
values are used to pad the result.
Returns a range formed from this range and another iterable collection by combining corresponding elements in pairs .
Returns a range formed from this range and another iterable collection by combining corresponding elements in pairs . If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this range is shorter than that
.
the element to be used to fill up the result if that
is shorter than this range.
a new collection of type That
containing pairs consisting of
corresponding elements of this range and that
. The length
of the returned collection is the maximum of the lengths of this range and that
.
If this range is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this range, thatElem
values are used to pad the result.
[use case] Zips this range with its indices .
Zips this range with its indices .
A new range containing pairs consisting of all elements of this
range paired with their index. Indices start at 0
.
@example
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Zips this range with its indices .
Zips this range with its indices .
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A
).
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type (A1, Int)
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, Int), That]
.
is found.
A new collection of type That
containing pairs consisting of all elements of this
range paired with their index. Indices start at 0
.
The
Range
class represents integer values in range [start;end) with non-zero step valuestep
. It's a special case of an indexed sequence. For example:version
2 . 8
since
2 . 5
authors:
Martin Odersky