ZippedAll

trait ZippedAll [A1 >: A, B] extends Transformed[(A1, B)] with ZippedAll[A1, B]

definition classes: SeqViewLikeIterableViewLike
linear super types: ZippedAll[A1, B], Transformed[(A1, B)], Transformed[(A1, B)], Transformed[(A1, B)], SeqView[(A1, B), Coll], SeqViewLike[(A1, B), Coll, SeqView[(A1, B), Coll]], IterableView[(A1, B), Coll], IterableViewLike[(A1, B), Coll, SeqView[(A1, B), Coll]], TraversableView[(A1, B), Coll], TraversableViewLike[(A1, B), Coll, SeqView[(A1, B), Coll]], Seq[(A1, B)], SeqLike[(A1, B), SeqView[(A1, B), Coll]], Iterable[(A1, B)], IterableLike[(A1, B), SeqView[(A1, B), Coll]], Equals, Traversable[(A1, B)], GenericTraversableTemplate[(A1, B), Seq], TraversableLike[(A1, B), SeqView[(A1, B), Coll]], TraversableOnce[(A1, B)], FilterMonadic[(A1, B), SeqView[(A1, B), Coll]], HasNewBuilder[(A1, B), SeqView[(A1, B), Coll]], PartialFunction[Int, (A1, B)], (Int) ⇒ (A1, B), AnyRef, Any
source: SeqViewLike.scala
Ordering
1. Alphabetic
2. By inheritance
Inherited
1. Hide All
2. Show all
1. ZippedAll
2. ZippedAll
3. Transformed
4. Transformed
5. Transformed
6. SeqView
7. SeqViewLike
8. IterableView
9. IterableViewLike
10. TraversableView
11. TraversableViewLike
12. Seq
13. SeqLike
14. Iterable
15. IterableLike
16. Equals
17. Traversable
18. GenericTraversableTemplate
19. TraversableLike
20. TraversableOnce
22. HasNewBuilder
23. PartialFunction
24. Function1
25. AnyRef
26. Any
Visibility
1. Public
2. All
Impl.
1. Concrete
2. Abstract

Type Members

1. trait Appended [B >: A] extends Transformed[B] with Appended[B]

definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
2. trait DroppedWhile extends Transformed[A] with DroppedWhile

definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
3. trait Filtered extends Transformed[A] with Filtered

definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
4. trait FlatMapped [B] extends Transformed[B] with FlatMapped[B]

definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
5. trait Forced [B] extends Transformed[B] with Forced[B]

A fall back which forces everything into a vector and then applies an operation on it.

6. trait Mapped [B] extends Transformed[B] with Mapped[B]

definition classes: SeqViewLikeIterableViewLikeTraversableViewLike

10. type Self = SeqView[(A1, B), Coll]

The type implementing this traversable

The type implementing this traversable

attributes: protected
definition classes: TraversableLike
11. trait Sliced extends Transformed[A] with Sliced

pre: from >= 0

12. trait TakenWhile extends Transformed[A] with TakenWhile

definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
13. trait Transformed [+B] extends SeqView[B, Coll] with Transformed[B]

The implementation base trait of this view.

14. class WithFilter extends FilterMonadic[A, Repr]

A class supporting filtered operations.

15. trait Zipped [B] extends Transformed[(A, B)] with Zipped[B]

definition classes: SeqViewLikeIterableViewLike
16. trait ZippedAll [A1 >: A, B] extends Transformed[(A1, B)] with ZippedAll[A1, B]

definition classes: SeqViewLikeIterableViewLike

Value Members

1. def != (arg0: AnyRef) : Boolean

attributes: final
definition classes: AnyRef
2. def != (arg0: Any) : Boolean

`o != arg0` is the same as `!(o == (arg0))`.

`o != arg0` is the same as `!(o == (arg0))`.

arg0

the object to compare against this object for dis-equality.

returns

`false` if the receiver object is equivalent to the argument; `true` otherwise.

attributes: final
definition classes: Any
3. def ## () : Int

attributes: final
definition classes: AnyRef → Any
4. def \$asInstanceOf [T0] () : T0

attributes: final
definition classes: AnyRef
5. def \$isInstanceOf [T0] () : Boolean

attributes: final
definition classes: AnyRef
6. def ++ (that: TraversableOnce[(A1, B)]) : Seq[(A1, B)]

[use case] Concatenates this sequence with the elements of a traversable collection.

[use case]

Concatenates this sequence with the elements of a traversable collection.

that

the traversable to append.

returns

a new sequence which contains all elements of this sequence followed by all elements of `that`.

attributes: abstract
definition classes: TraversableLike
7. def ++ [B >: A, That] (xs: TraversableOnce[B])(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Concatenates this sequence with the elements of a traversable collection.

Concatenates this sequence with the elements of a traversable collection.

B

the element type of the returned collection.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` which contains all elements of this sequence followed by all elements of `that`.

definition classes: TraversableViewLikeTraversableLike
8. def +: (elem: (A1, B)) : Seq[(A1, B)]

[use case] Prepends an element to this sequence

[use case]

Prepends an element to this sequence

elem

the prepended element

returns

a new sequence consisting of `elem` followed by all elements of this sequence.

attributes: abstract
definition classes: SeqLike
9. def +: [B >: A, That] (elem: B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Prepends an element to this sequence

Prepends an element to this sequence

B

the element type of the returned sequence.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

elem

the prepended element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` consisting of `elem` followed by all elements of this sequence.

definition classes: SeqViewLikeSeqLike
10. def /: [B] (z: B)(op: (B, (A1, B)) ⇒ B) : B

Applies a binary operator to a start value and all elements of this sequence, going left to right.

Applies a binary operator to a start value and all elements of this sequence, going left to right.

Note: `/:` is alternate syntax for `foldLeft`; `z /: xs` is the same as `xs foldLeft z`.

Note: will not terminate for infinite-sized collections.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this sequence, going left to right with the start value `z` on the left: op(...op(op(z, x1), x2), ..., xn) where `x,,1,,, ..., x,,n,,` are the elements of this sequence.

definition classes: TraversableOnce
11. def :+ (elem: (A1, B)) : Seq[(A1, B)]

[use case] Appends an element to this sequence

[use case]

Appends an element to this sequence

Note: will not terminate for infinite-sized collections.

elem

the appended element

returns

a new sequence consisting of all elements of this sequence followed by `elem`.

attributes: abstract
definition classes: SeqLike
12. def :+ [B >: A, That] (elem: B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Appends an element to this sequence

Appends an element to this sequence

Note: will not terminate for infinite-sized collections.

B

the element type of the returned sequence.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

elem

the appended element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` consisting of all elements of this sequence followed by `elem`.

definition classes: SeqViewLikeSeqLike
13. def :\ [B] (z: B)(op: ((A1, B), B) ⇒ B) : B

Applies a binary operator to all elements of this sequence and a start value, going right to left.

Applies a binary operator to all elements of this sequence and a start value, going right to left.

Note: `:\` is alternate syntax for `foldRight`; `xs :\ z` is the same as `xs foldRight z`.

Note: will not terminate for infinite-sized collections.

B

the result type of the binary operator.

z

the start value

op

the binary operator

returns

the result of inserting `op` between consecutive elements of this sequence, going right to left with the start value `z` on the right: op(x1, op(x2, ... op(xn, z)...)) where `x,,1,,, ..., x,,n,,` are the elements of this sequence.

definition classes: TraversableOnce
14. def == (arg0: AnyRef) : Boolean

`o == arg0` is the same as `if (o eq null) arg0 eq null else o.equals(arg0)`.

`o == arg0` is the same as `if (o eq null) arg0 eq null else o.equals(arg0)`.

arg0

the object to compare against this object for equality.

returns

`true` if the receiver object is equivalent to the argument; `false` otherwise.

attributes: final
definition classes: AnyRef
15. def == (arg0: Any) : Boolean

`o == arg0` is the same as `o.equals(arg0)`.

`o == arg0` is the same as `o.equals(arg0)`.

arg0

the object to compare against this object for equality.

returns

`true` if the receiver object is equivalent to the argument; `false` otherwise.

attributes: final
definition classes: Any
16. def addString (b: StringBuilder) : StringBuilder

Appends all elements of this sequence to a string builder.

Appends all elements of this sequence to a string builder. The written text consists of the string representations (w.r.t. the method `toString`) of all elements of this sequence without any separator string.

b

the string builder to which elements are appended.

returns

the string builder `b` to which elements were appended.

definition classes: TraversableOnce
17. def addString (b: StringBuilder, sep: String) : StringBuilder

Appends all elements of this sequence to a string builder using a separator string.

Appends all elements of this sequence to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method `toString`) of all elements of this sequence, separated by the string `sep`.

b

the string builder to which elements are appended.

sep

the separator string.

returns

the string builder `b` to which elements were appended.

definition classes: TraversableOnce
18. def addString (b: StringBuilder, start: String, sep: String, end: String) : StringBuilder

Appends all elements of this sequence to a string builder using start, end, and separator strings.

Appends all elements of this sequence to a string builder using start, end, and separator strings. The written text begins with the string `start` and ends with the string `end`. Inside, the string representations (w.r.t. the method `toString`) of all elements of this sequence are separated by the string `sep`.

b

the string builder to which elements are appended.

start

the starting string.

sep

the separator string.

end

the ending string.

returns

the string builder `b` to which elements were appended.

definition classes: TraversableOnce
19. def andThen [C] (k: ((A1, B)) ⇒ C) : PartialFunction[Int, C]

Composes this partial function with a transformation function that gets applied to results of this partial function.

Composes this partial function with a transformation function that gets applied to results of this partial function.

C

the result type of the transformation function.

k

the transformation function

returns

a partial function with the same domain as this partial function, which maps arguments `x` to `k(this(x))`.

definition classes: PartialFunctionFunction1
20. def apply (idx: Int) : (A1, B)

Selects an element by its index in the sequence.

Selects an element by its index in the sequence.

idx

The index to select.

returns

the element of this sequence at index `idx`, where `0` indicates the first element.

definition classes: ZippedAllTransformedSeqLikeFunction1
21. def asInstanceOf [T0] : T0

This method is used to cast the receiver object to be of type `T0`.

This method is used to cast the receiver object to be of type `T0`.

Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression`1.asInstanceOf[String]` will throw a `ClassCastException` at runtime, while the expression`List(1).asInstanceOf[List[String]]` will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested typed.

returns

attributes: final
definition classes: Any
22. def canEqual (that: Any) : Boolean

Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.

Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.

that

The object with which this sequence should be compared

returns

`true`, if this sequence can possibly equal `that`, `false` otherwise. The test takes into consideration only the run-time types of objects but ignores their elements.

definition classes: IterableLikeEquals
23. def clone () : AnyRef

This method creates and returns a copy of the receiver object.

This method creates and returns a copy of the receiver object.

The default implementation of the `clone` method is platform dependent.

returns

a copy of the receiver object.

attributes: protected[lang]
definition classes: AnyRef
24. def collect [B] (pf: PartialFunction[(A1, B), B]) : Seq[B]

[use case] Builds a new collection by applying a partial function to all elements of this sequence on which the function is defined.

[use case]

Builds a new collection by applying a partial function to all elements of this sequence on which the function is defined.

B

the element type of the returned collection.

pf

the partial function which filters and maps the sequence.

returns

a new sequence resulting from applying the given partial function `pf` to each element on which it is defined and collecting the results. The order of the elements is preserved.

attributes: abstract
definition classes: TraversableLike
25. def collect [B, That] (pf: PartialFunction[(A1, B), B])(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Builds a new collection by applying a partial function to all elements of this sequence on which the function is defined.

Builds a new collection by applying a partial function to all elements of this sequence on which the function is defined.

B

the element type of the returned collection.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

pf

the partial function which filters and maps the sequence.

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` resulting from applying the partial function `pf` to each element on which it is defined and collecting the results. The order of the elements is preserved.

definition classes: TraversableViewLikeTraversableLike
26. def companion : GenericCompanion[Seq]

The factory companion object that builds instances of class Seq.

The factory companion object that builds instances of class Seq. (or its `Iterable` superclass where class Seq is not a `Seq`.)

definition classes: SeqIterableTraversableGenericTraversableTemplate
27. def compose [A] (g: (A) ⇒ Int) : (A) ⇒ (A1, B)

(f compose g)(x) == f(g(x))

(f compose g)(x) == f(g(x))

definition classes: Function1
28. def contains (elem: Any) : Boolean

Tests whether this sequence contains a given value as an element.

Tests whether this sequence contains a given value as an element.

Note: may not terminate for infinite-sized collections.

elem

the element to test.

returns

`true` if this sequence has an element that is is equal (wrt `==`) to `elem`, `false` otherwise.

definition classes: SeqLike
29. def containsSlice [B] (that: Seq[B]) : Boolean

Tests whether this sequence contains a given sequence as a slice.

Tests whether this sequence contains a given sequence as a slice.

Note: may not terminate for infinite-sized collections.

that

the sequence to test

returns

`true` if this sequence contains a slice with the same elements as `that`, otherwise `false`.

definition classes: SeqLike
30. def copyToArray (xs: Array[(A1, B)], start: Int, len: Int) : Unit

[use case] Copies elements of this sequence to an array.

[use case]

Copies elements of this sequence to an array. Fills the given array `xs` with at most `len` elements of this sequence, starting at position `start`. Copying will stop once either the end of the current sequence is reached, or the end of the array is reached, or `len` elements have been copied.

xs

the array to fill.

start

the starting index.

len

the maximal number of elements to copy.

attributes: abstract
definition classes: TraversableLike
31. def copyToArray [B >: A] (xs: Array[B], start: Int, len: Int) : Unit

Copies elements of this sequence to an array.

Copies elements of this sequence to an array. Fills the given array `xs` with at most `len` elements of this sequence, starting at position `start`. Copying will stop once either the end of the current sequence is reached, or the end of the array is reached, or `len` elements have been copied.

Note: will not terminate for infinite-sized collections.

B

the type of the elements of the array.

xs

the array to fill.

start

the starting index.

len

the maximal number of elements to copy.

definition classes: IterableLikeTraversableLikeTraversableOnce
32. def copyToArray (xs: Array[(A1, B)]) : Unit

[use case] Copies values of this sequence to an array.

[use case]

Copies values of this sequence to an array. Fills the given array `xs` with values of this sequence. Copying will stop once either the end of the current sequence is reached, or the end of the array is reached.

xs

the array to fill.

attributes: abstract
definition classes: TraversableOnce
33. def copyToArray [B >: A] (xs: Array[B]) : Unit

Copies values of this sequence to an array.

Copies values of this sequence to an array. Fills the given array `xs` with values of this sequence. Copying will stop once either the end of the current sequence is reached, or the end of the array is reached.

Note: will not terminate for infinite-sized collections.

B

the type of the elements of the array.

xs

the array to fill.

definition classes: TraversableOnce
34. def copyToArray (xs: Array[(A1, B)], start: Int) : Unit

[use case] Copies values of this sequence to an array.

[use case]

Copies values of this sequence to an array. Fills the given array `xs` with values of this sequence, after skipping `start` values. Copying will stop once either the end of the current sequence is reached, or the end of the array is reached.

xs

the array to fill.

start

the starting index.

attributes: abstract
definition classes: TraversableOnce
35. def copyToArray [B >: A] (xs: Array[B], start: Int) : Unit

Copies values of this sequence to an array.

Copies values of this sequence to an array. Fills the given array `xs` with values of this sequence, after skipping `start` values. Copying will stop once either the end of the current sequence is reached, or the end of the array is reached.

Note: will not terminate for infinite-sized collections.

B

the type of the elements of the array.

xs

the array to fill.

start

the starting index.

definition classes: TraversableOnce
36. def copyToBuffer [B >: A] (dest: Buffer[B]) : Unit

Copies all elements of this sequence to a buffer.

Copies all elements of this sequence to a buffer.

Note: will not terminate for infinite-sized collections.

dest

The buffer to which elements are copied.

definition classes: TraversableOnce
37. def corresponds [B] (that: Seq[B])(p: ((A1, B), B) ⇒ Boolean) : Boolean

Tests whether every element of this sequence relates to the corresponding element of another sequence by satisfying a test predicate.

Tests whether every element of this sequence relates to the corresponding element of another sequence by satisfying a test predicate.

B

the type of the elements of `that`

that

the other sequence

p

the test predicate, which relates elements from both sequences

returns

`true` if both sequences have the same length and `p(x, y)` is `true` for all corresponding elements `x` of this sequence and `y` of `that`, otherwise `false`.

definition classes: SeqLike
38. def count (p: ((A1, B)) ⇒ Boolean) : Int

Counts the number of elements in the sequence which satisfy a predicate.

Counts the number of elements in the sequence which satisfy a predicate.

p

the predicate used to test elements.

returns

the number of elements satisfying the predicate `p`.

definition classes: TraversableOnce
39. def diff (that: Seq[(A1, B)]) : Seq[(A1, B)]

[use case] Computes the multiset difference between this sequence and another sequence.

[use case]

Computes the multiset difference between this sequence and another sequence.

Note: will not terminate for infinite-sized collections.

that

the sequence of elements to remove

returns

a new sequence which contains all elements of this sequence except some of occurrences of elements that also appear in `that`. If an element value `x` appears n times in `that`, then the first n occurrences of `x` will not form part of the result, but any following occurrences will.

attributes: abstract
definition classes: SeqLike
40. def diff [B >: A] (that: Seq[B]) : SeqView[(A1, B), Coll]

Computes the multiset difference between this sequence and another sequence.

Computes the multiset difference between this sequence and another sequence.

Note: will not terminate for infinite-sized collections.

B

the element type of the returned sequence.

that

the sequence of elements to remove

returns

a new collection of type `That` which contains all elements of this sequence except some of occurrences of elements that also appear in `that`. If an element value `x` appears n times in `that`, then the first n occurrences of `x` will not form part of the result, but any following occurrences will.

definition classes: SeqViewLikeSeqLike
41. def distinct : SeqView[(A1, B), Coll]

Builds a new sequence from this sequence without any duplicate elements.

Builds a new sequence from this sequence without any duplicate elements.

Note: will not terminate for infinite-sized collections.

returns

A new sequence which contains the first occurrence of every element of this sequence.

definition classes: SeqLike
42. def drop (n: Int) : SeqView[(A1, B), Coll]

Selects all elements except first n ones.

Selects all elements except first n ones.

n

the number of elements to drop from this sequence.

returns

a sequence consisting of all elements of this sequence except the first `n` ones, or else the empty sequence, if this sequence has less than `n` elements.

definition classes: TraversableViewLikeTraversableLike
43. def dropRight (n: Int) : SeqView[(A1, B), Coll]

Selects all elements except last n ones.

Selects all elements except last n ones.

n

The number of elements to take

returns

a sequence consisting of all elements of this sequence except the first `n` ones, or else the empty sequence, if this sequence has less than `n` elements.

definition classes: IterableLike
44. def dropWhile (p: ((A1, B)) ⇒ Boolean) : SeqView[(A1, B), Coll]

Drops longest prefix of elements that satisfy a predicate.

Drops longest prefix of elements that satisfy a predicate.

p

The predicate used to test elements.

returns

the longest suffix of this sequence whose first element does not satisfy the predicate `p`.

definition classes: TraversableViewLikeTraversableLike
45. def elements : Iterator[(A1, B)]

definition classes: IterableLike
deprecated:
1. use `iterator' instead`

46. def endsWith [B] (that: Seq[B]) : Boolean

Tests whether this sequence ends with the given sequence.

Tests whether this sequence ends with the given sequence.

Note: will not terminate for infinite-sized collections.

that

the sequence to test

returns

`true` if this sequence has `that` as a suffix, `false` otherwise.

definition classes: SeqLike
47. def eq (arg0: AnyRef) : Boolean

This method is used to test whether the argument (`arg0`) is a reference to the receiver object (`this`).

This method is used to test whether the argument (`arg0`) is a reference to the receiver object (`this`).

The `eq` method implements an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence relation] on non-null instances of `AnyRef`: * It is reflexive: for any non-null instance `x` of type `AnyRef`, `x.eq(x)` returns `true`. * It is symmetric: for any non-null instances `x` and `y` of type `AnyRef`, `x.eq(y)` returns `true` if and only if `y.eq(x)` returns `true`. * It is transitive: for any non-null instances `x`, `y`, and `z` of type `AnyRef` if `x.eq(y)` returns `true` and `y.eq(z)` returns `true`, then `x.eq(z)` returns `true`.

Additionally, the `eq` method has three other properties. * It is consistent: for any non-null instances `x` and `y` of type `AnyRef`, multiple invocations of `x.eq(y)` consistently returns `true` or consistently returns `false`. * For any non-null instance `x` of type `AnyRef`, `x.eq(null)` and `null.eq(x)` returns `false`. * `null.eq(null)` returns `true`.

When overriding the `equals` or `hashCode` methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (`o1 eq o2`), they should be equal to each other (`o1 == o2`) and they should hash to the same value (`o1.hashCode == o2.hashCode`).

arg0

the object to compare against this object for reference equality.

returns

`true` if the argument is a reference to the receiver object; `false` otherwise.

attributes: final
definition classes: AnyRef
48. def equals (that: Any) : Boolean

The equality method defined in `AnyRef`.

The equality method defined in `AnyRef`[email protected] `true` if the receiver object is equivalent to the argument; `false` otherwise. */

definition classes: SeqLikeEquals → AnyRef → Any
49. def equalsWith [B] (that: Seq[B])(f: ((A1, B), B) ⇒ Boolean) : Boolean

Tests whether every element of this sequence relates to the corresponding element of another sequence by satisfying a test predicate.

Tests whether every element of this sequence relates to the corresponding element of another sequence by satisfying a test predicate.

B

the type of the elements of `that`

that

the other sequence

returns

`true` if both sequences have the same length and `p(x, y)` is `true` for all corresponding elements `x` of this sequence and `y` of `that`, otherwise `false`.

definition classes: SeqLike
deprecated:
1. use `corresponds` instead

50. def exists (p: ((A1, B)) ⇒ Boolean) : Boolean

Tests whether a predicate holds for some of the elements of this sequence.

Tests whether a predicate holds for some of the elements of this sequence.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

returns

`true` if the given predicate `p` holds for some of the elements of this sequence, otherwise `false`.

definition classes: IterableLikeTraversableLikeTraversableOnce
51. def filter (p: ((A1, B)) ⇒ Boolean) : SeqView[(A1, B), Coll]

Selects all elements of this sequence which satisfy a predicate.

Selects all elements of this sequence which satisfy a predicate.

p

the predicate used to test elements.

returns

a new sequence consisting of all elements of this sequence that satisfy the given predicate `p`. The order of the elements is preserved.

definition classes: TraversableViewLikeTraversableLike
52. def filterNot (p: ((A1, B)) ⇒ Boolean) : SeqView[(A1, B), Coll]

Selects all elements of this sequence which do not satisfy a predicate.

Selects all elements of this sequence which do not satisfy a predicate.

p

the predicate used to test elements.

returns

a new sequence consisting of all elements of this sequence that do not satisfy the given predicate `p`. The order of the elements is preserved.

definition classes: TraversableLike
53. def finalize () : Unit

This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object.

This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object.

The details of when and if the `finalize` method are invoked, as well as the interaction between `finalize`and non-local returns and exceptions, are all platform dependent.

attributes: protected[lang]
definition classes: AnyRef
54. def find (p: ((A1, B)) ⇒ Boolean) : Option[(A1, B)]

Finds the first element of the sequence satisfying a predicate, if any.

Finds the first element of the sequence satisfying a predicate, if any.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

returns

an option value containing the first element in the sequence that satisfies `p`, or `None` if none exists.

definition classes: IterableLikeTraversableLikeTraversableOnce
55. def findIndexOf (p: ((A1, B)) ⇒ Boolean) : Int

Returns index of the first element satisfying a predicate, or `-1`.

Returns index of the first element satisfying a predicate, or `-1`.

definition classes: SeqLike
56. def findLastIndexOf (p: ((A1, B)) ⇒ Boolean) : Int

Returns index of the last element satisfying a predicate, or -1.

Returns index of the last element satisfying a predicate, or -1.

definition classes: SeqLike
deprecated:
1. use `lastIndexWhere` instead

57. def first : (A1, B)

definition classes: IterableLike
deprecated:
1. use `head' instead`

58. def firstOption : Option[(A1, B)]

`None` if iterable is empty.

`None` if iterable is empty.

definition classes: IterableLike
deprecated:
1. use `headOption' instead`

59. def flatMap [B] (f: ((A1, B)) ⇒ Traversable[B]) : Seq[B]

[use case] Builds a new collection by applying a function to all elements of this sequence and concatenating the results.

[use case]

Builds a new collection by applying a function to all elements of this sequence and concatenating the results.

B

the element type of the returned collection.

f

the function to apply to each element.

returns

a new sequence resulting from applying the given collection-valued function `f` to each element of this sequence and concatenating the results.

attributes: abstract
definition classes: TraversableLike
60. def flatMap [B, That] (f: ((A1, B)) ⇒ Traversable[B])(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Builds a new collection by applying a function to all elements of this sequence and concatenating the results.

Builds a new collection by applying a function to all elements of this sequence and concatenating the results.

B

the element type of the returned collection.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

f

the function to apply to each element.

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` resulting from applying the given collection-valued function `f` to each element of this sequence and concatenating the results.

61. def flatten [B] : Seq[B]

[use case] Converts this sequence of traversable collections into a sequence in which all element collections are concatenated.

[use case]

Converts this sequence of traversable collections into a sequence in which all element collections are concatenated.

B

the type of the elements of each traversable collection.

returns

a new sequence resulting from concatenating all element sequences.

attributes: abstract
definition classes: GenericTraversableTemplate
62. def flatten [B] (implicit asTraversable: ((A1, B)) ⇒ Traversable[B]) : Seq[B]

Converts this sequence of traversable collections into a sequence in which all element collections are concatenated.

Converts this sequence of traversable collections into a sequence in which all element collections are concatenated.

B

the type of the elements of each traversable collection.

asTraversable

an implicit conversion which asserts that the element type of this sequence is a `Traversable`.

returns

a new sequence resulting from concatenating all element sequences.

definition classes: GenericTraversableTemplate
63. def foldLeft [B] (z: B)(op: (B, (A1, B)) ⇒ B) : B

Applies a binary operator to a start value and all elements of this sequence, going left to right.

Applies a binary operator to a start value and all elements of this sequence, going left to right.

Note: will not terminate for infinite-sized collections.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this sequence, going left to right with the start value `z` on the left: op(...op(z, x1), x2, ..., xn) where `x,,1,,, ..., x,,n,,` are the elements of this sequence.

definition classes: TraversableOnce
64. def foldRight [B] (z: B)(op: ((A1, B), B) ⇒ B) : B

Applies a binary operator to all elements of this sequence and a start value, going right to left.

Applies a binary operator to all elements of this sequence and a start value, going right to left.

Note: will not terminate for infinite-sized collections.

B

the result type of the binary operator.

z

the start value.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this sequence, going right to left with the start value `z` on the right: op(x1, op(x2, ... op(xn, z)...)) where `x,,1,,, ..., x,,n,,` are the elements of this sequence.

definition classes: IterableLikeTraversableOnce
65. def forall (p: ((A1, B)) ⇒ Boolean) : Boolean

Tests whether a predicate holds for all elements of this sequence.

Tests whether a predicate holds for all elements of this sequence.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

returns

`true` if the given predicate `p` holds for all elements of this sequence, otherwise `false`.

definition classes: IterableLikeTraversableLikeTraversableOnce
66. def force [B >: A, That] (implicit bf: CanBuildFrom[Coll, B, That]) : That

definition classes: TraversableViewLike
67. def foreach (f: ((A1, B)) ⇒ Unit) : Unit

[use case] Applies a function `f` to all elements of this sequence.

[use case]

Applies a function `f` to all elements of this sequence.

f

the function that is applied for its side-effect to every element. The result of function `f` is discarded.

attributes: abstract
definition classes: IterableLike
68. def foreach [U] (f: ((A1, B)) ⇒ U) : Unit

Applies a function `f` to all elements of this sequence.

Applies a function `f` to all elements of this sequence.

Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.

U

the type parameter describing the result of function `f`. This result will always be ignored. Typically `U` is `Unit`, but this is not necessary.

f

the function that is applied for its side-effect to every element. The result of function `f` is discarded.

69. def genericBuilder [B] : Builder[B, Seq[B]]

The generic builder that builds instances of Seq at arbitrary element types.

The generic builder that builds instances of Seq at arbitrary element types.

definition classes: GenericTraversableTemplate
70. def getClass () : java.lang.Class[_ <: java.lang.Object]

Returns a representation that corresponds to the dynamic class of the receiver object.

Returns a representation that corresponds to the dynamic class of the receiver object.

The nature of the representation is platform dependent.

returns

a representation that corresponds to the dynamic class of the receiver object.

attributes: final
definition classes: AnyRef
71. def groupBy [K] (f: ((A1, B)) ⇒ K) : Map[K, SeqView[(A1, B), Coll]]

Partitions this sequence into a map of sequences according to some discriminator function.

Partitions this sequence into a map of sequences according to some discriminator function.

Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new sequence.

K

the type of keys returned by the discriminator function.

f

the discriminator function.

returns

A map from keys to sequences such that the following invariant holds: (xs partition f)(k) = xs filter (x => f(x) == k) That is, every key `k` is bound to a sequence of those elements `x` for which `f(x)` equals `k`.

definition classes: TraversableViewLikeTraversableLike
72. def grouped (size: Int) : Iterator[SeqView[(A1, B), Coll]]

Partitions elements in fixed size sequences.

Partitions elements in fixed size sequences.

size

the number of elements per group

returns

An iterator producing sequences of size `size`, except the last will be truncated if the elements don't divide evenly.

definition classes: IterableViewLikeIterableLike
1. Iterator#grouped

73. def hasDefiniteSize : Boolean

Tests whether this sequence is known to have a finite size.

Tests whether this sequence is known to have a finite size. All strict collections are known to have finite size. For a non-strict collection such as `Stream`, the predicate returns `true` if all elements have been computed. It returns `false` if the stream is not yet evaluated to the end.

Note: many collection methods will not work on collections of infinite sizes.

returns

`true` if this collection is known to have finite size, `false` otherwise.

definition classes: TraversableLikeTraversableOnce
74. def hashCode () : Int

Hashcodes for Seq produce a value from the hashcodes of all the elements of the sequence.

Hashcodes for Seq produce a value from the hashcodes of all the elements of the [email protected] the hash code value for the object. */

definition classes: SeqLike → AnyRef → Any
75. def head : (A1, B)

Selects the first element of this sequence.

Selects the first element of this sequence.

returns

the first element of this sequence.

definition classes: IterableLikeTraversableLike
76. def headOption : Option[(A1, B)]

Optionally selects the first element.

Optionally selects the first element.

returns

the first element of this sequence if it is nonempty, `None` if it is empty.

definition classes: TraversableLike
77. def indexOf (elem: (A1, B), from: Int) : Int

[use case] Finds index of first occurrence of some value in this sequence after or at some start index.

[use case]

Finds index of first occurrence of some value in this sequence after or at some start index.

elem

the element value to search for.

from

the start index

returns

the index `>= from` of the first element of this sequence that is equal (wrt `==`) to `elem`, or `-1`, if none exists.

attributes: abstract
definition classes: SeqLike
78. def indexOf [B >: A] (elem: B, from: Int) : Int

Finds index of first occurrence of some value in this sequence after or at some start index.

Finds index of first occurrence of some value in this sequence after or at some start index.

Note: may not terminate for infinite-sized collections.

B

the type of the element `elem`.

elem

the element value to search for.

from

the start index

returns

the index `>= from` of the first element of this sequence that is equal (wrt `==`) to `elem`, or `-1`, if none exists.

definition classes: SeqLike
79. def indexOf (elem: (A1, B)) : Int

[use case] Finds index of first occurrence of some value in this sequence.

[use case]

Finds index of first occurrence of some value in this sequence.

elem

the element value to search for.

returns

the index of the first element of this sequence that is equal (wrt `==`) to `elem`, or `-1`, if none exists.

attributes: abstract
definition classes: SeqLike
80. def indexOf [B >: A] (elem: B) : Int

Finds index of first occurrence of some value in this sequence.

Finds index of first occurrence of some value in this sequence.

Note: may not terminate for infinite-sized collections.

B

the type of the element `elem`.

elem

the element value to search for.

returns

the index of the first element of this sequence that is equal (wrt `==`) to `elem`, or `-1`, if none exists.

definition classes: SeqLike
81. def indexOfSlice [B >: A] (that: Seq[B], from: Int) : Int

Finds first index after or at a start index where this sequence contains a given sequence as a slice.

Finds first index after or at a start index where this sequence contains a given sequence as a slice.

Note: may not terminate for infinite-sized collections.

that

the sequence to test

from

the start index

returns

the first index `>= from` such that the elements of this sequence starting at this index match the elements of sequence `that`, or `-1` of no such subsequence exists.

definition classes: SeqLike
82. def indexOfSlice [B >: A] (that: Seq[B]) : Int

Finds first index where this sequence contains a given sequence as a slice.

Finds first index where this sequence contains a given sequence as a slice.

Note: may not terminate for infinite-sized collections.

that

the sequence to test

returns

the first index such that the elements of this sequence starting at this index match the elements of sequence `that`, or `-1` of no such subsequence exists.

definition classes: SeqLike
83. def indexWhere (p: ((A1, B)) ⇒ Boolean, from: Int) : Int

Finds index of the first element satisfying some predicate after or at some start index.

Finds index of the first element satisfying some predicate after or at some start index.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

from

the start index

returns

the index `>= from` of the first element of this sequence that satisfies the predicate `p`, or `-1`, if none exists.

definition classes: SeqLike
84. def indexWhere (p: ((A1, B)) ⇒ Boolean) : Int

Finds index of first element satisfying some predicate.

Finds index of first element satisfying some predicate.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

returns

the index of the first element of this sequence that satisfies the predicate `p`, or `-1`, if none exists.

definition classes: SeqLike
85. def indices : Range

Produces the range of all indices of this sequence.

Produces the range of all indices of this sequence.

returns

a `Range` value from `0` to one less than the length of this sequence.

definition classes: SeqLike
86. def init : SeqView[(A1, B), Coll]

Selects all elements except the last.

Selects all elements except the last.

returns

a sequence consisting of all elements of this sequence except the last one.

definition classes: TraversableViewLikeTraversableLike
87. def intersect (that: Seq[(A1, B)]) : Seq[(A1, B)]

[use case] Computes the multiset intersection between this sequence and another sequence.

[use case]

Computes the multiset intersection between this sequence and another sequence.

Note: may not terminate for infinite-sized collections.

that

the sequence of elements to intersect with.

returns

a new sequence which contains all elements of this sequence which also appear in `that`. If an element value `x` appears n times in `that`, then the first n occurrences of `x` will be retained in the result, but any following occurrences will be omitted.

attributes: abstract
definition classes: SeqLike
88. def intersect [B >: A] (that: Seq[B]) : SeqView[(A1, B), Coll]

Computes the multiset intersection between this sequence and another sequence.

Computes the multiset intersection between this sequence and another sequence.

Note: may not terminate for infinite-sized collections.

B

the element type of the returned sequence.

that

the sequence of elements to intersect with.

returns

a new collection of type `That` which contains all elements of this sequence which also appear in `that`. If an element value `x` appears n times in `that`, then the first n occurrences of `x` will be retained in the result, but any following occurrences will be omitted.

definition classes: SeqViewLikeSeqLike
89. def isDefinedAt (idx: Int) : Boolean

Tests whether this sequence contains given index.

Tests whether this sequence contains given index.

The implementations of methods `apply` and `isDefinedAt` turn a `Seq[A]` into a `PartialFunction[Int, A]`.

idx

the index to test

returns

`true` if this sequence contains an element at position `idx`, `false` otherwise.

definition classes: SeqLike
90. def isEmpty : Boolean

Tests whether this sequence is empty.

Tests whether this sequence is empty.

returns

`true` if the sequence contain no elements, `false` otherwise.

definition classes: IterableLikeTraversableLikeTraversableOnce
91. def isInstanceOf [T0] : Boolean

This method is used to test whether the dynamic type of the receiver object is `T0`.

This method is used to test whether the dynamic type of the receiver object is `T0`.

Note that the test result of the test is modulo Scala's erasure semantics. Therefore the expression`1.isInstanceOf[String]` will return `false`, while the expression `List(1).isInstanceOf[List[String]]` will return `true`. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested typed.

returns

`true` if the receiver object is an instance of erasure of type `T0`; `false` otherwise.

attributes: final
definition classes: Any
92. def isTraversableAgain : Boolean

Tests whether this sequence can be repeatedly traversed.

Tests whether this sequence can be repeatedly traversed.

returns

`true`

attributes: final
definition classes: TraversableLikeTraversableOnce
93. def iterator : Iterator[(A1, B)]

Creates a new iterator over all elements contained in this iterable object.

Creates a new iterator over all elements contained in this iterable object.

returns

the new iterator

definition classes: ZippedAllIterableLike
94. def last : (A1, B)

Selects the last element.

Selects the last element.

returns

The last element of this sequence.

definition classes: TraversableLike
95. def lastIndexOf (elem: (A1, B), end: Int) : Int

[use case] Finds index of last occurrence of some value in this sequence before or at a given end index.

[use case]

Finds index of last occurrence of some value in this sequence before or at a given end index.

elem

the element value to search for.

end

the end index.

returns

the index `<= end` of the last element of this sequence that is equal (wrt `==`) to `elem`, or `-1`, if none exists.

attributes: abstract
definition classes: SeqLike
96. def lastIndexOf [B >: A] (elem: B, end: Int) : Int

Finds index of last occurrence of some value in this sequence before or at a given end index.

Finds index of last occurrence of some value in this sequence before or at a given end index.

B

the type of the element `elem`.

elem

the element value to search for.

end

the end index.

returns

the index `<= end` of the last element of this sequence that is equal (wrt `==`) to `elem`, or `-1`, if none exists.

definition classes: SeqLike
97. def lastIndexOf (elem: (A1, B)) : Int

[use case] Finds index of last occurrence of some value in this sequence.

[use case]

Finds index of last occurrence of some value in this sequence.

elem

the element value to search for.

returns

the index of the last element of this sequence that is equal (wrt `==`) to `elem`, or `-1`, if none exists.

attributes: abstract
definition classes: SeqLike
98. def lastIndexOf [B >: A] (elem: B) : Int

Finds index of last occurrence of some value in this sequence.

Finds index of last occurrence of some value in this sequence.

Note: will not terminate for infinite-sized collections.

B

the type of the element `elem`.

elem

the element value to search for.

returns

the index of the last element of this sequence that is equal (wrt `==`) to `elem`, or `-1`, if none exists.

definition classes: SeqLike
99. def lastIndexOfSlice [B >: A] (that: Seq[B], end: Int) : Int

Finds last index before or at a given end index where this sequence contains a given sequence as a slice.

Finds last index before or at a given end index where this sequence contains a given sequence as a slice.

that

the sequence to test

end

the end index

returns

the last index `<= end` such that the elements of this sequence starting at this index match the elements of sequence `that`, or `-1` of no such subsequence exists.

definition classes: SeqLike
100. def lastIndexOfSlice [B >: A] (that: Seq[B]) : Int

Finds last index where this sequence contains a given sequence as a slice.

Finds last index where this sequence contains a given sequence as a slice.

Note: will not terminate for infinite-sized collections.

that

the sequence to test

returns

the last index such that the elements of this sequence starting a this index match the elements of sequence `that`, or `-1` of no such subsequence exists.

definition classes: SeqLike
101. def lastIndexWhere (p: ((A1, B)) ⇒ Boolean, end: Int) : Int

Finds index of last element satisfying some predicate before or at given end index.

Finds index of last element satisfying some predicate before or at given end index.

p

the predicate used to test elements.

returns

the index `<= end` of the last element of this sequence that satisfies the predicate `p`, or `-1`, if none exists.

definition classes: SeqLike
102. def lastIndexWhere (p: ((A1, B)) ⇒ Boolean) : Int

Finds index of last element satisfying some predicate.

Finds index of last element satisfying some predicate.

Note: will not terminate for infinite-sized collections.

p

the predicate used to test elements.

returns

the index of the last element of this sequence that satisfies the predicate `p`, or `-1`, if none exists.

definition classes: SeqLike
103. def lastOption : Option[(A1, B)]

Optionally selects the last element.

Optionally selects the last element.

returns

the last element of this sequence\$ if it is nonempty, `None` if it is empty.

definition classes: TraversableLike
104. def length : Int

The length of the sequence.

The length of the sequence.

Note: will not terminate for infinite-sized collections.

Note: `xs.length` and `xs.size` yield the same result.

returns

the number of elements in this sequence.

definition classes: ZippedAllTransformedSeqLike
105. def lengthCompare (len: Int) : Int

Compares the length of this sequence to a test value.

Compares the length of this sequence to a test value.

len

the test value that gets compared with the length.

returns

A value `x` where x < 0 if this.length < len x == 0 if this.length == len x > 0 if this.length > len The method as implemented here does not call `length` directly; its running time is `O(length min len)` instead of `O(length)`. The method should be overwritten if computing `length` is cheap.

definition classes: SeqLike
106. def lift : (Int) ⇒ Option[(A1, B)]

Turns this partial function into an plain function returning an `Option` result.

Turns this partial function into an plain function returning an `Option` result.

returns

a function that takes an argument `x` to `Some(this(x))` if `this` is defined for `x`, and to `None` otherwise.

definition classes: PartialFunction
107. def map [B] (f: ((A1, B)) ⇒ B) : Seq[B]

[use case] Builds a new collection by applying a function to all elements of this sequence.

[use case]

Builds a new collection by applying a function to all elements of this sequence.

B

the element type of the returned collection.

f

the function to apply to each element.

returns

a new sequence resulting from applying the given function `f` to each element of this sequence and collecting the results.

attributes: abstract
definition classes: TraversableLike
108. def map [B, That] (f: ((A1, B)) ⇒ B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Builds a new collection by applying a function to all elements of this sequence.

Builds a new collection by applying a function to all elements of this sequence.

B

the element type of the returned collection.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

f

the function to apply to each element.

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` resulting from applying the given function `f` to each element of this sequence and collecting the results.

109. def max : (A1, B)

[use case] Finds the largest element.

[use case]

Finds the largest element.

returns

the largest element of this sequence.

attributes: abstract
definition classes: TraversableOnce
110. def max [B >: A] (implicit cmp: Ordering[B]) : (A1, B)

Finds the largest element.

Finds the largest element.

B

The type over which the ordering is defined.

cmp

An ordering to be used for comparing elements.

returns

the largest element of this sequence with respect to the ordering `cmp`.

definition classes: TraversableOnce
111. def min : (A1, B)

[use case] Finds the smallest element.

[use case]

Finds the smallest element.

returns

the smallest element of this sequence

attributes: abstract
definition classes: TraversableOnce
112. def min [B >: A] (implicit cmp: Ordering[B]) : (A1, B)

Finds the smallest element.

Finds the smallest element.

B

The type over which the ordering is defined.

cmp

An ordering to be used for comparing elements.

returns

the smallest element of this sequence with respect to the ordering `cmp`.

definition classes: TraversableOnce
113. def mkString : String

Displays all elements of this sequence in a string.

Displays all elements of this sequence in a string.

returns

a string representation of this sequence. In the resulting string the string representations (w.r.t. the method `toString`) of all elements of this sequence follow each other without any separator string.

definition classes: TraversableOnce
114. def mkString (sep: String) : String

Displays all elements of this sequence in a string using a separator string.

Displays all elements of this sequence in a string using a separator string.

sep

the separator string.

returns

a string representation of this sequence. In the resulting string the string representations (w.r.t. the method `toString`) of all elements of this sequence are separated by the string `sep`.

definition classes: TraversableOnce
115. def mkString (start: String, sep: String, end: String) : String

Displays all elements of this sequence in a string using start, end, and separator strings.

Displays all elements of this sequence in a string using start, end, and separator strings.

start

the starting string.

sep

the separator string.

end

the ending string.

returns

a string representation of this sequence. The resulting string begins with the string `start` and ends with the string `end`. Inside, the string representations (w.r.t. the method `toString`) of all elements of this sequence are separated by the string `sep`.

definition classes: TraversableOnce
116. def ne (arg0: AnyRef) : Boolean

`o.ne(arg0)` is the same as `!(o.eq(arg0))`.

`o.ne(arg0)` is the same as `!(o.eq(arg0))`.

arg0

the object to compare against this object for reference dis-equality.

returns

`false` if the argument is not a reference to the receiver object; `true` otherwise.

attributes: final
definition classes: AnyRef
117. def newAppended [B >: A] (that: Traversable[B]) : Transformed[B]

attributes: protected
definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
118. def newBuilder : Builder[(A1, B), SeqView[(A1, B), Coll]]

The builder that builds instances of type Seq[A]

The builder that builds instances of type Seq[A]

attributes: protected[this]
119. def newDroppedWhile (p: ((A1, B)) ⇒ Boolean) : Transformed[(A1, B)]

attributes: protected
definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
120. def newFiltered (p: ((A1, B)) ⇒ Boolean) : Transformed[(A1, B)]

attributes: protected
definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
121. def newFlatMapped [B] (f: ((A1, B)) ⇒ Traversable[B]) : Transformed[B]

attributes: protected
definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
122. def newForced [B] (xs: ⇒ Seq[B]) : Transformed[B]

Boilerplate method, to override in each subclass This method could be eliminated if Scala had virtual classes

Boilerplate method, to override in each subclass This method could be eliminated if Scala had virtual classes

attributes: protected
definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
123. def newMapped [B] (f: ((A1, B)) ⇒ B) : Transformed[B]

attributes: protected
definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
124. def newPatched [B >: A] (_from: Int, _patch: Seq[B], _replaced: Int) : Transformed[B]

attributes: protected
definition classes: SeqViewLike
125. def newPrepended [B >: A] (elem: B) : Transformed[B]

attributes: protected
definition classes: SeqViewLike
126. def newReversed : Transformed[(A1, B)]

attributes: protected
definition classes: SeqViewLike
127. def newSliced (_from: Int, _until: Int) : Transformed[(A1, B)]

attributes: protected
definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
128. def newTakenWhile (p: ((A1, B)) ⇒ Boolean) : Transformed[(A1, B)]

attributes: protected
definition classes: SeqViewLikeIterableViewLikeTraversableViewLike
129. def newZipped [B] (that: Iterable[B]) : Transformed[((A1, B), B)]

attributes: protected
definition classes: SeqViewLikeIterableViewLike
130. def newZippedAll [A1 >: A, B] (that: Iterable[B], _thisElem: A1, _thatElem: B) : Transformed[(A1, B)]

attributes: protected
definition classes: SeqViewLikeIterableViewLike
131. def nonEmpty : Boolean

Tests whether the sequence is not empty.

Tests whether the sequence is not empty.

returns

`true` if the sequence contains at least one element, `false` otherwise.

definition classes: TraversableOnce
132. def notify () : Unit

Wakes up a single thread that is waiting on the receiver object's monitor.

Wakes up a single thread that is waiting on the receiver object's monitor.

attributes: final
definition classes: AnyRef
133. def notifyAll () : Unit

Wakes up all threads that are waiting on the receiver object's monitor.

Wakes up all threads that are waiting on the receiver object's monitor.

attributes: final
definition classes: AnyRef
134. def orElse [A1 <: A, B1 >: B] (that: PartialFunction[A1, B1]) : PartialFunction[A1, B1]

Composes this partial function with a fallback partial function which gets applied where this partial function is not defined.

Composes this partial function with a fallback partial function which gets applied where this partial function is not defined.

A1

the argument type of the fallback function

B1

the result type of the fallback function

that

the fallback function

returns

a partial function which has as domain the union of the domains of this partial function and `that`. The resulting partial function takes `x` to `this(x)` where `this` is defined, and to `that(x)` where it is not.

definition classes: PartialFunction
135. val other : Iterable[B]

attributes: protected[this] abstract
definition classes: ZippedAll
136. def padTo (len: Int, elem: (A1, B)) : Seq[(A1, B)]

[use case] Appends an element value to this sequence until a given target length is reached.

[use case]

Appends an element value to this sequence until a given target length is reached.

len

the target length

elem

returns

a new sequence consisting of all elements of this sequence followed by the minimal number of occurrences of `elem` so that the resulting sequence has a length of at least `len`.

attributes: abstract
definition classes: SeqLike
137. def padTo [B >: A, That] (len: Int, elem: B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Appends an element value to this sequence until a given target length is reached.

Appends an element value to this sequence until a given target length is reached.

B

the element type of the returned sequence.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

len

the target length

elem

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` consisting of all elements of this sequence followed by the minimal number of occurrences of `elem` so that the resulting collection has a length of at least `len`.

definition classes: SeqViewLikeSeqLike
138. def partition (p: ((A1, B)) ⇒ Boolean) : (SeqView[(A1, B), Coll], SeqView[(A1, B), Coll])

Partitions this sequence in two sequences according to a predicate.

Partitions this sequence in two sequences according to a predicate.

p

the predicate on which to partition.

returns

a pair of sequences: the first sequence consists of all elements that satisfy the predicate `p` and the second sequence consists of all elements that don't. The relative order of the elements in the resulting sequences is the same as in the original sequence.

definition classes: TraversableViewLikeTraversableLike
139. def patch (from: Int, that: Seq[(A1, B)], replaced: Int) : Seq[(A1, B)]

[use case] Produces a new sequence where a slice of elements in this sequence is replaced by another sequence.

[use case]

Produces a new sequence where a slice of elements in this sequence is replaced by another sequence.

from

the index of the first replaced element

replaced

the number of elements to drop in the original sequence

returns

a new sequence consisting of all elements of this sequence except that `replaced` elements starting from `from` are replaced by `patch`.

attributes: abstract
definition classes: SeqLike
140. def patch [B >: A, That] (from: Int, patch: Seq[B], replaced: Int)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Produces a new sequence where a slice of elements in this sequence is replaced by another sequence.

Produces a new sequence where a slice of elements in this sequence is replaced by another sequence.

B

the element type of the returned sequence.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

from

the index of the first replaced element

patch

the replacement sequence

replaced

the number of elements to drop in the original sequence

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new sequence consisting of all elements of this sequence except that `replaced` elements starting from `from` are replaced by `patch`.

definition classes: SeqViewLikeSeqLike
141. def prefixLength (p: ((A1, B)) ⇒ Boolean) : Int

Returns the length of the longest prefix whose elements all satisfy some predicate.

Returns the length of the longest prefix whose elements all satisfy some predicate.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

returns

the length of the longest prefix of this sequence such that every element of the segment satisfies the predicate `p`.

definition classes: SeqLike
142. def product : (A1, B)

[use case] Multiplies up the elements of this collection.

[use case]

Multiplies up the elements of this collection.

returns

the product of all elements in this sequence of numbers of type `Int`. Instead of `Int`, any other type `T` with an implicit `Numeric[T]` implementation can be used as element type of the sequence and as result type of `product`. Examples of such types are: `Long`, `Float`, `Double`, `BigInt`.

attributes: abstract
definition classes: TraversableOnce
143. def product [B >: A] (implicit num: Numeric[B]) : B

Multiplies up the elements of this collection.

Multiplies up the elements of this collection.

B

the result type of the `*` operator.

num

an implicit parameter defining a set of numeric operations which includes the `*` operator to be used in forming the product.

returns

the product of all elements of this sequence with respect to the `*` operator in `num`.

definition classes: TraversableOnce
144. def projection : SeqView[(A1, B), SeqView[(A1, B), Coll]]

returns a projection that can be used to call non-strict `filter`,`map`, and `flatMap` methods that build projections of the collection.

returns a projection that can be used to call non-strict `filter`,`map`, and `flatMap` methods that build projections of the collection.

definition classes: SeqLikeIterableLike
deprecated:
1. use `view' instead`

145. def reduceLeft [B >: A] (op: (B, (A1, B)) ⇒ B) : B

Applies a binary operator to all elements of this sequence, going left to right.

Applies a binary operator to all elements of this sequence, going left to right.

Note: will not terminate for infinite-sized collections.

B

the result type of the binary operator.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this sequence, going left to right: op(...(op(x1, x2), ... ) , xn) where `x,,1,,, ..., x,,n,,` are the elements of this sequence.

definition classes: TraversableOnce
146. def reduceLeftOption [B >: A] (op: (B, (A1, B)) ⇒ B) : Option[B]

Optionally applies a binary operator to all elements of this sequence, going left to right.

Optionally applies a binary operator to all elements of this sequence, going left to right.

Note: will not terminate for infinite-sized collections.

B

the result type of the binary operator.

op

the binary operator.

returns

an option value containing the result of `reduceLeft(op)` is this sequence is nonempty, `None` otherwise.

definition classes: TraversableOnce
147. def reduceRight [B >: A] (op: ((A1, B), B) ⇒ B) : B

Applies a binary operator to all elements of this sequence, going right to left.

Applies a binary operator to all elements of this sequence, going right to left.

Note: will not terminate for infinite-sized collections.

B

the result type of the binary operator.

op

the binary operator.

returns

the result of inserting `op` between consecutive elements of this sequence, going right to left: op(x1, op(x2, ..., op(xn-1, xn)...)) where `x,,1,,, ..., x,,n,,` are the elements of this sequence.

definition classes: IterableLikeTraversableOnce
148. def reduceRightOption [B >: A] (op: ((A1, B), B) ⇒ B) : Option[B]

Optionally applies a binary operator to all elements of this sequence, going right to left.

Optionally applies a binary operator to all elements of this sequence, going right to left.

Note: will not terminate for infinite-sized collections.

B

the result type of the binary operator.

op

the binary operator.

returns

an option value containing the result of `reduceRight(op)` is this sequence is nonempty, `None` otherwise.

definition classes: TraversableOnce
149. def repr : SeqView[(A1, B), Coll]

The collection of type sequence underlying this `TraversableLike` object.

The collection of type sequence underlying this `TraversableLike` object. By default this is implemented as the `TraversableLike` object itself, but this can be overridden.

definition classes: TraversableLike
150. def reverse : SeqView[(A1, B), Coll]

Returns new sequence wih elements in reversed order.

Returns new sequence wih elements in reversed order.

Note: will not terminate for infinite-sized collections.

returns

A new sequence with all elements of this sequence in reversed order.

definition classes: SeqViewLikeSeqLike
151. def reverseIterator : Iterator[(A1, B)]

An iterator yielding elements in reversed order.

An iterator yielding elements in reversed order.

Note: will not terminate for infinite-sized collections.

Note: `xs.reverseIterator` is the same as `xs.reverse.iterator` but might be more efficient.

returns

an iterator yielding the elements of this sequence in reversed order

definition classes: SeqLike
152. def reverseMap [B] (f: ((A1, B)) ⇒ B) : Seq[B]

[use case] Builds a new collection by applying a function to all elements of this sequence and collecting the results in reversed order.

[use case]

Builds a new collection by applying a function to all elements of this sequence and collecting the results in reversed order.

B

the element type of the returned collection.

Note: `xs.reverseMap(f)` is the same as `xs.reverse.map(f)` but might be more efficient.

f

the function to apply to each element.

returns

a new sequence resulting from applying the given function `f` to each element of this sequence and collecting the results in reversed order.

attributes: abstract
definition classes: SeqLike
153. def reverseMap [B, That] (f: ((A1, B)) ⇒ B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Builds a new collection by applying a function to all elements of this sequence and collecting the results in reversed order.

Builds a new collection by applying a function to all elements of this sequence and collecting the results in reversed order.

Note: will not terminate for infinite-sized collections.

Note: `xs.reverseMap(f)` is the same as `xs.reverse.map(f)` but might be more efficient.

B

the element type of the returned collection.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

f

the function to apply to each element.

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` resulting from applying the given function `f` to each element of this sequence and collecting the results in reversed order.

definition classes: SeqViewLikeSeqLike
154. def reversed : List[(A1, B)]

attributes: protected[this]
definition classes: TraversableOnce
155. def reversedElements : Iterator[(A1, B)]

definition classes: SeqLike
deprecated:
1. use `reverseIterator' instead`

156. def sameElements (that: Iterable[(A1, B)]) : Boolean

[use case] Checks if the other iterable collection contains the same elements in the same order as this sequence.

[use case]

Checks if the other iterable collection contains the same elements in the same order as this sequence.

that

the collection to compare with.

returns

`true`, if both collections contain the same elements in the same order, `false` otherwise.

attributes: abstract
definition classes: IterableLike
157. def sameElements [B >: A] (that: Iterable[B]) : Boolean

Checks if the other iterable collection contains the same elements in the same order as this sequence.

Checks if the other iterable collection contains the same elements in the same order as this sequence.

Note: will not terminate for infinite-sized collections.

B

the type of the elements of collection `that`.

that

the collection to compare with.

returns

`true`, if both collections contain the same elements in the same order, `false` otherwise.

definition classes: IterableLike
158. def scanLeft [B, That] (z: B)(op: (B, (A1, B)) ⇒ B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Produces a collection containing cummulative results of applying the operator going left to right.

Produces a collection containing cummulative results of applying the operator going left to right.

Note: will not terminate for infinite-sized collections.

B

the type of the elements in the resulting collection

That

the actual type of the resulting collection

z

the initial value

op

the binary operator applied to the intermediate result and the element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

collection with intermediate results

definition classes: TraversableViewLikeTraversableLike
159. def scanRight [B, That] (z: B)(op: ((A1, B), B) ⇒ B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Produces a collection containing cummulative results of applying the operator going right to left.

Produces a collection containing cummulative results of applying the operator going right to left.

Note: will not terminate for infinite-sized collections.

B

the type of the elements in the resulting collection

That

the actual type of the resulting collection

z

the initial value

op

the binary operator applied to the intermediate result and the element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

collection with intermediate results

definition classes: TraversableViewLikeTraversableLike
160. def segmentLength (p: ((A1, B)) ⇒ Boolean, from: Int) : Int

Computes length of longest segment whose elements all satisfy some predicate.

Computes length of longest segment whose elements all satisfy some predicate.

Note: may not terminate for infinite-sized collections.

p

the predicate used to test elements.

from

the index where the search starts.

returns

the length of the longest segment of this sequence starting from index `from` such that every element of the segment satisfies the predicate `p`.

definition classes: SeqLike
161. def size : Int

The size of this sequence, equivalent to `length`.

The size of this sequence, equivalent to `length`.

Note: will not terminate for infinite-sized [email protected] the number of elements in this sequence.

definition classes: SeqLikeTraversableOnce
162. def slice (from: Int, until: Int) : SeqView[(A1, B), Coll]

Selects an interval of elements.

Selects an interval of elements.

Note: `c.slice(from, to)` is equivalent to (but possibly more efficient than) `c.drop(from).take(to - from)`

from

the index of the first returned element in this sequence.

until

the index one past the last returned element in this sequence.

returns

a sequence containing the elements starting at index `from` and extending up to (but not including) index `until` of this sequence.

definition classes: TraversableViewLikeTraversableLike
163. def sliding [B >: A] (size: Int, step: Int) : Iterator[SeqView[(A1, B), Coll]]

definition classes: IterableViewLikeIterableLike
164. def sliding [B >: A] (size: Int) : Iterator[SeqView[(A1, B), Coll]]

Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.

Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)

size

the number of elements per group

returns

An iterator producing sequences of size `size`, except the last and the only element will be truncated if there are fewer elements than size.

definition classes: IterableLike
1. Iterator#sliding

165. def sortBy [B] (f: ((A1, B)) ⇒ B)(implicit ord: Ordering[B]) : SeqView[(A1, B), Coll]

Sorts this Seq according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.

Sorts this Seq according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.

B

the target type of the transformation `f`, and the type where the ordering `ord` is defined.

f

the transformation function mapping elements to some other domain `B`.

ord

the ordering assumed on domain `B`.

returns

a sequence consisting of the elements of this sequence sorted according to the ordering where `x < y` if `ord.lt(f(x), f(y))`.

definition classes: SeqLike
1. scala.math.Ordering

Note: will not terminate for infinite-sized collections.

166. def sortWith (lt: ((A1, B), (A1, B)) ⇒ Boolean) : SeqView[(A1, B), Coll]

Sorts this sequence according to a comparison function.

Sorts this sequence according to a comparison function.

Note: will not terminate for infinite-sized collections.

The sort is stable. That is, elements that are equal wrt `lt` appear in the same order in the sorted sequence as in the original.

lt

the comparison function which tests whether its first argument precedes its second argument in the desired ordering.

returns

a sequence consisting of the elements of this sequence sorted according to the comparison function `lt`.

definition classes: SeqLike
167. def sorted [B >: A] (implicit ord: Ordering[B]) : SeqView[(A1, B), Coll]

Sorts this sequence according to an Ordering.

Sorts this sequence according to an Ordering.

The sort is stable. That is, elements that are equal wrt `lt` appear in the same order in the sorted sequence as in the original.

ord

the ordering to be used to compare elements.

returns

a sequence consisting of the elements of this sequence sorted according to the ordering `ord`.

definition classes: SeqViewLikeSeqLike
1. scala.math.Ordering

168. def span (p: ((A1, B)) ⇒ Boolean) : (SeqView[(A1, B), Coll], SeqView[(A1, B), Coll])

Splits this sequence into a prefix/suffix pair according to a predicate.

Splits this sequence into a prefix/suffix pair according to a predicate.

Note: `c span p` is equivalent to (but possibly more efficient than) `(c takeWhile p, c dropWhile p)`, provided the evaluation of the predicate `p` does not cause any side-effects.

p

the test predicate

returns

a pair consisting of the longest prefix of this sequence whose elements all satisfy `p`, and the rest of this sequence.

definition classes: TraversableViewLikeTraversableLike
169. def splitAt (n: Int) : (SeqView[(A1, B), Coll], SeqView[(A1, B), Coll])

Splits this sequence into two at a given position.

Splits this sequence into two at a given position. Note: `c splitAt n` is equivalent to (but possibly more efficient than) `(c take n, c drop n)`.

n

the position at which to split.

returns

a pair of sequences consisting of the first `n` elements of this sequence, and the other elements.

definition classes: TraversableViewLikeTraversableLike
170. def startsWith [B] (that: Seq[B]) : Boolean

Tests whether this sequence starts with the given sequence.

Tests whether this sequence starts with the given sequence.

that

the sequence to test

returns

`true` if this collection has `that` as a prefix, `false` otherwise.

definition classes: SeqLike
171. def startsWith [B] (that: Seq[B], offset: Int) : Boolean

Tests whether this sequence contains the given sequence at a given index.

Tests whether this sequence contains the given sequence at a given index.

If the both the receiver object, `this` and the argument, `that` are infinite sequences this method may not terminate.

that

the sequence to test

offset

the index where the sequence is searched.

returns

`true` if the sequence `that` is contained in this sequence at index `offset`, otherwise `false`.

definition classes: SeqLike
172. def stringPrefix : String

Defines the prefix of this object's `toString` representation.

Defines the prefix of this object's `toString` representation.

returns

a string representation which starts the result of `toString` applied to this sequence. By default the string prefix is the simple name of the collection class sequence.

173. def sum : (A1, B)

[use case] Sums up the elements of this collection.

[use case]

Sums up the elements of this collection.

returns

the sum of all elements in this sequence of numbers of type `Int`. Instead of `Int`, any other type `T` with an implicit `Numeric[T]` implementation can be used as element type of the sequence and as result type of `sum`. Examples of such types are: `Long`, `Float`, `Double`, `BigInt`.

attributes: abstract
definition classes: TraversableOnce
174. def sum [B >: A] (implicit num: Numeric[B]) : B

Sums up the elements of this collection.

Sums up the elements of this collection.

B

the result type of the `+` operator.

num

an implicit parameter defining a set of numeric operations which includes the `+` operator to be used in forming the sum.

returns

the sum of all elements of this sequence with respect to the `+` operator in `num`.

definition classes: TraversableOnce
175. def synchronized [T0] (arg0: T0) : T0

attributes: final
definition classes: AnyRef
176. def tail : SeqView[(A1, B), Coll]

Selects all elements except the first.

Selects all elements except the first.

returns

a sequence consisting of all elements of this sequence except the first one.

definition classes: TraversableLike
177. def take (n: Int) : SeqView[(A1, B), Coll]

Selects first n elements.

Selects first n elements.

n

Tt number of elements to take from this sequence.

returns

a sequence consisting only of the first `n` elements of this sequence, or else the whole sequence, if it has less than `n` elements.

definition classes: TraversableViewLikeTraversableLike
178. def takeRight (n: Int) : SeqView[(A1, B), Coll]

Selects last n elements.

Selects last n elements.

n

the number of elements to take

returns

a sequence consisting only of the last `n` elements of this sequence, or else the whole sequence, if it has less than `n` elements.

definition classes: IterableLike
179. def takeWhile (p: ((A1, B)) ⇒ Boolean) : SeqView[(A1, B), Coll]

Takes longest prefix of elements that satisfy a predicate.

Takes longest prefix of elements that satisfy a predicate.

p

The predicate used to test elements.

returns

the longest prefix of this sequence whose elements all satisfy the predicate `p`.

definition classes: TraversableViewLikeTraversableLike
180. val thatElem : B

attributes: protected[this] abstract
definition classes: ZippedAll
181. lazy val thatSeq : Seq[B]

attributes: protected[this]
182. def thisCollection : Seq[(A1, B)]

The underlying collection seen as an instance of `Seq`.

The underlying collection seen as an instance of `Seq`. By default this is implemented as the current collection object itself, but this can be overridden.

attributes: protected[this]
definition classes: SeqLikeIterableLikeTraversableLike
183. val thisElem : A1

attributes: protected[this] abstract
definition classes: ZippedAll
184. def thisSeq : Seq[(A1, B)]

attributes: protected[this]
definition classes: TraversableViewLike
185. def toArray : Array[(A1, B)]

[use case] Converts this sequence to an array.

[use case]

Converts this sequence to an array.

Note: will not terminate for infinite-sized collections.

returns

an array containing all elements of this sequence. A `ClassManifest` must be available for the element type of this sequence.

attributes: abstract
definition classes: TraversableOnce
186. def toArray [B >: A] (implicit arg0: ClassManifest[B]) : Array[B]

Converts this sequence to an array.

Converts this sequence to an array.

Note: will not terminate for infinite-sized collections.

B

the type of the elements of the array. A `ClassManifest` for this type must be available.

returns

an array containing all elements of this sequence.

definition classes: TraversableOnce
187. def toBuffer [B >: A] : Buffer[B]

Converts this sequence to a mutable buffer.

Converts this sequence to a mutable buffer.

Note: will not terminate for infinite-sized collections.

returns

a buffer containing all elements of this sequence.

definition classes: TraversableOnce
188. def toCollection (repr: SeqView[(A1, B), Coll]) : Seq[(A1, B)]

A conversion from collections of type `Repr` to `Seq` objects.

A conversion from collections of type `Repr` to `Seq` objects. By default this is implemented as just a cast, but this can be overridden.

attributes: protected[this]
definition classes: SeqLikeIterableLikeTraversableLike
189. def toIndexedSeq [B >: A] : IndexedSeq[B]

Converts this sequence to an indexed sequence.

Converts this sequence to an indexed sequence.

Note: will not terminate for infinite-sized collections.

returns

an indexed sequence containing all elements of this sequence.

definition classes: TraversableOnce
190. def toIterable : Iterable[(A1, B)]

Converts this sequence to an iterable collection.

Converts this sequence to an iterable collection. Note that the choice of target `Iterable` is lazy in this default implementation as this `TraversableOnce` may be lazy and unevaluated (i.e. it may be an iterator which is only traversable once).

Note: will not terminate for infinite-sized collections.

returns

an `Iterable` containing all elements of this sequence.

definition classes: IterableLikeTraversableOnce
191. def toIterator : Iterator[(A1, B)]

Returns an Iterator over the elements in this sequence.

Returns an Iterator over the elements in this sequence. Will return the same Iterator if this instance is already an Iterator.

Note: will not terminate for infinite-sized collections.

returns

an Iterator containing all elements of this sequence.

definition classes: TraversableLikeTraversableOnce
192. def toList : List[(A1, B)]

Converts this sequence to a list.

Converts this sequence to a list.

Note: will not terminate for infinite-sized collections.

returns

a list containing all elements of this sequence.

definition classes: TraversableOnce
193. def toMap [T, U] (implicit ev: <:<[(A1, B), (T, U)]) : Map[T, U]

Converts this sequence to a map.

Converts this sequence to a map. This method is unavailable unless the elements are members of Tuple2, each ((K, V)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.

Note: will not terminate for infinite-sized collections.

returns

a map containing all elements of this sequence.

definition classes: TraversableOnce
194. def toSeq : Seq[(A1, B)]

Converts this sequence to a sequence.

Converts this sequence to a sequence.

Note: will not terminate for infinite-sized collections.

Overridden for [email protected] a sequence containing all the elements of this sequence.

definition classes: SeqLikeIterableLikeTraversableOnce
195. def toSet [B >: A] : Set[B]

Converts this sequence to a set.

Converts this sequence to a set.

Note: will not terminate for infinite-sized collections.

returns

a set containing all elements of this sequence.

definition classes: TraversableOnce
196. def toStream : Stream[(A1, B)]

Converts this sequence to a stream.

Converts this sequence to a stream.

Note: will not terminate for infinite-sized collections.

returns

a stream containing all elements of this sequence.

definition classes: IterableLikeTraversableLikeTraversableOnce
197. def toString () : String

Converts this sequence to a string.

Converts this sequence to a string.

returns

a string representation of this collection. By default this string consists of the `stringPrefix` of this sequence, followed by all elements separated by commas and enclosed in parentheses.

definition classes: TransformedTraversableLike → AnyRef → Any
198. def toTraversable : Traversable[(A1, B)]

Converts this sequence to an unspecified Traversable.

Converts this sequence to an unspecified Traversable. Will return the same collection if this instance is already Traversable.

Note: will not terminate for infinite-sized collections.

returns

a Traversable containing all elements of this sequence.

definition classes: TraversableLikeTraversableOnce
199. def transpose [B] (implicit asTraversable: ((A1, B)) ⇒ Traversable[B]) : Seq[Seq[B]]

Transposes this sequence of traversable collections into a sequence of sequences.

Transposes this sequence of traversable collections into a sequence of sequences.

B

the type of the elements of each traversable collection.

asTraversable

an implicit conversion which asserts that the element type of this sequence is a `Traversable`.

returns

a two-dimensional sequence of sequences which has as nth row the nth column of this sequence.

definition classes: GenericTraversableTemplate
200. lazy val underlying : Coll

definition classes: TransformedTraversableViewLike
201. def union (that: Seq[(A1, B)]) : Seq[(A1, B)]

[use case] Produces a new sequence which contains all elements of this sequence and also all elements of a given sequence.

[use case]

Produces a new sequence which contains all elements of this sequence and also all elements of a given sequence. `xs union ys` is equivalent to `xs ++ ys`.

Note: will not terminate for infinite-sized collections.

that

returns

a new sequence which contains all elements of this sequence followed by all elements of `that`.

attributes: abstract
definition classes: SeqLike
202. def union [B >: A, That] (that: Seq[B])(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

Produces a new sequence which contains all elements of this sequence and also all elements of a given sequence.

Produces a new sequence which contains all elements of this sequence and also all elements of a given sequence. `xs union ys` is equivalent to `xs ++ ys`.

Note: will not terminate for infinite-sized collections.

Another way to express this is that `xs union ys` computes the order-presevring multi-set union of `xs` and `ys`. `union` is hence a counter-part of `diff` and `intersect` which also work on multi-sets.

Note: will not terminate for infinite-sized collections.

B

the element type of the returned sequence.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

that

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new collection of type `That` which contains all elements of this sequence followed by all elements of `that`.

definition classes: SeqViewLikeSeqLike
203. def unzip [A1, A2] (implicit asPair: ((A1, B)) ⇒ (A1, A2)) : (Seq[A1], Seq[A2])

Converts this sequence of pairs into two collections of the first and second halfs of each pair.

Converts this sequence of pairs into two collections of the first and second halfs of each pair.

asPair

an implicit conversion which asserts that the element type of this sequence is a pair.

returns

a pair sequences, containing the first, respectively second half of each element pair of this sequence.

definition classes: GenericTraversableTemplate
204. def updated (index: Int, elem: (A1, B)) : Seq[(A1, B)]

[use case] A copy of this sequence with one single replaced element.

[use case]

A copy of this sequence with one single replaced element.

index

the position of the replacement

elem

the replacing element

returns

a copy of this sequence with the element at position `index` replaced by `elem`.

attributes: abstract
definition classes: SeqLike
205. def updated [B >: A, That] (index: Int, elem: B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], B, That]) : That

A copy of this sequence with one single replaced element.

A copy of this sequence with one single replaced element.

B

the element type of the returned sequence.

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `B` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, B, That]` is found.

index

the position of the replacement

elem

the replacing element

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `B`.

returns

a new sequence` which is a copy of this sequence with the element at position `index` replaced by `elem```. ```

definition classes: SeqViewLikeSeqLike
206. def view (from: Int, until: Int) : SeqView[(A1, B), SeqView[(A1, B), Coll]]

Creates a non-strict view of a slice of this sequence.

Creates a non-strict view of a slice of this sequence.

Note: the difference between `view` and `slice` is that `view` produces a view of the current sequence, whereas `slice` produces a new sequence.

Note: `view(from, to)` is equivalent to `view.slice(from, to)`

from

the index of the first element of the view

until

the index of the element following the view

returns

a non-strict view of a slice of this sequence, starting at index `from` and extending up to (but not including) index `until`.

definition classes: SeqLikeIterableLikeTraversableLike
207. def view : SeqView[(A1, B), SeqView[(A1, B), Coll]]

Creates a non-strict view of this sequence.

Creates a non-strict view of this sequence.

returns

a non-strict view of this sequence.

definition classes: SeqLikeIterableLikeTraversableLike
208. def wait () : Unit

attributes: final
definition classes: AnyRef
209. def wait (arg0: Long, arg1: Int) : Unit

attributes: final
definition classes: AnyRef
210. def wait (arg0: Long) : Unit

attributes: final
definition classes: AnyRef
211. def withFilter (p: ((A1, B)) ⇒ Boolean) : SeqView[(A1, B), Coll]

Creates a non-strict filter of this sequence.

Creates a non-strict filter of this sequence.

Note: the difference between `c filter p` and `c withFilter p` is that the former creates a new collection, whereas the latter only restricts the domain of subsequent `map`, `flatMap`, `foreach`, and `withFilter` operations.

p

the predicate used to test elements.

returns

an object of class `WithFilter`, which supports `map`, `flatMap`, `foreach`, and `withFilter` operations. All these operations apply to those elements of this sequence which satisfy the predicate `p`.

212. def zip [B] (that: Iterable[B]) : Seq[((A1, B), B)]

[use case] Returns a sequence formed from this sequence and another iterable collection by combining corresponding elements in pairs.

[use case]

Returns a sequence formed from this sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

B

the type of the second half of the returned pairs

that

The iterable providing the second half of each result pair

returns

a new sequence containing pairs consisting of corresponding elements of this sequence and `that`. The length of the returned collection is the minimum of the lengths of this sequence and `that`.

attributes: abstract
definition classes: IterableLike
213. def zip [A1 >: A, B, That] (that: Iterable[B])(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], (A1, B), That]) : That

Returns a sequence formed from this sequence and another iterable collection by combining corresponding elements in pairs.

Returns a sequence formed from this sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

A1

the type of the first half of the returned pairs (this is always a supertype of the collection's element type `A`).

B

the type of the second half of the returned pairs

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `(A1, B)` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, (A1, B), That]`. is found.

that

The iterable providing the second half of each result pair

bf

an implicit value of class `CanBuildFrom` which determines the result class `That` from the current representation type `Repr` and the new element type `(A1, B)`.

returns

a new collection of type `That` containing pairs consisting of corresponding elements of this sequence and `that`. The length of the returned collection is the minimum of the lengths of this sequence and `that`.

definition classes: IterableViewLikeIterableLike
214. def zipAll [B] (that: Iterable[B], thisElem: (A1, B), thatElem: B) : Seq[((A1, B), B)]

[use case] Returns a sequence formed from this sequence and another iterable collection by combining corresponding elements in pairs.

[use case]

Returns a sequence formed from this sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.

B

the type of the second half of the returned pairs

that

The iterable providing the second half of each result pair

thisElem

the element to be used to fill up the result if this sequence is shorter than `that`.

thatElem

the element to be used to fill up the result if `that` is shorter than this sequence.

returns

a new sequence containing pairs consisting of corresponding elements of this sequence and `that`. The length of the returned collection is the maximum of the lengths of this sequence and `that`. If this sequence is shorter than `that`, `thisElem` values are used to pad the result. If `that` is shorter than this sequence, `thatElem` values are used to pad the result.

attributes: abstract
definition classes: IterableLike
215. def zipAll [B, A1 >: A, That] (that: Iterable[B], thisElem: A1, thatElem: B)(implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], (A1, B), That]) : That

Returns a sequence formed from this sequence and another iterable collection by combining corresponding elements in pairs.

Returns a sequence formed from this sequence and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.

that

the iterable providing the second half of each result pair

thisElem

the element to be used to fill up the result if this sequence is shorter than `that`.

thatElem

the element to be used to fill up the result if `that` is shorter than this sequence.

returns

a new collection of type `That` containing pairs consisting of corresponding elements of this sequence and `that`. The length of the returned collection is the maximum of the lengths of this sequence and `that`. If this sequence is shorter than `that`, `thisElem` values are used to pad the result. If `that` is shorter than this sequence, `thatElem` values are used to pad the result.

definition classes: IterableViewLikeIterableLike
216. def zipWithIndex : Seq[((A1, B), Int)]

[use case] Zips this sequence with its indices.

[use case]

Zips this sequence with its indices.

returns

A new sequence containing pairs consisting of all elements of this sequence paired with their index. Indices start at `0`. @example `List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))`

attributes: abstract
definition classes: IterableLike
217. def zipWithIndex [A1 >: A, That] (implicit bf: CanBuildFrom[SeqView[(A1, B), Coll], (A1, Int), That]) : That

Zips this sequence with its indices.

Zips this sequence with its indices.

A1

the type of the first half of the returned pairs (this is always a supertype of the collection's element type `A`).

That

the class of the returned collection. Where possible, `That` is the same class as the current collection class `Repr`, but this depends on the element type `(A1, Int)` being admissible for that class, which means that an implicit instance of type `CanBuildFrom[Repr, (A1, Int), That]`. is found.

returns

A new collection of type `That` containing pairs consisting of all elements of this sequence paired with their index. Indices start at `0`.

definition classes: IterableViewLikeIterableLike