Concatenates this general map with the elements of a traversable collection.
Concatenates this general map with the elements of a traversable collection.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append.
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
a new collection of type That which contains all elements
of this general map followed by all elements of that.
Applies a binary operator to a start value and all elements of this general map, going left to right.
Applies a binary operator to a start value and all elements of this general map, going left to right.
Note: /: is alternate syntax for foldLeft; z /: xs is the same as
xs foldLeft z.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this general map,
going left to right with the start value z on the left:
op(...op(op(z, x,,1,,), x,,2,,), ..., x,,n,,)
where x,,1,,, ..., x,,n,, are the elements of this general map.
Applies a binary operator to all elements of this general map and a start value, going right to left.
Applies a binary operator to all elements of this general map and a start value, going right to left.
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as
xs foldRight z.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value
the binary operator
the result of inserting op between consecutive elements of this general map,
going right to left with the start value z on the right:
op(x,,1,,, op(x,,2,,, ... op(x,,n,,, z)...))
where x,,1,,, ..., x,,n,, are the elements of this general map.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold and reduce. It has similar semantics, but does
not require the result to be a supertype of the element type. It traverses the elements in
different partitions sequentially, using seqop to update the result, and then
applies combop to results from different partitions. The implementation of this
operation may operate on an arbitrary number of collection partitions, so combop
may be invoked arbitrary number of times.
For example, one might want to process some elements and then produce a Set. In this
case, seqop would process an element and append it to the list, while combop
would concatenate two lists from different partitions together. The initial value
z would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop operator (e.g.
Nil for list concatenation or 0 for summation)
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
A method that should be called from every well-designed equals method that is open to be overridden in a subclass.
A method that should be called from every well-designed equals method that is open to be overridden in a subclass. See Programming in Scala, Chapter 28 for discussion and design.
the value being probed for possible equality
true if this instance can possibly equal that, otherwise false
Builds a new collection by applying a partial function to all elements of this general map on which the function is defined.
Builds a new collection by applying a partial function to all elements of this general map on which the function is defined.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the partial function which filters and maps the general map.
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
a new collection of type That resulting from applying the partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Copies values of this general map to an array.
Copies values of this general map to an array.
Fills the given array xs with values of this general map, beginning at index start.
Copying will stop once either the end of the current general map is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the type of the elements of the array.
the array to fill.
the starting index.
Copies values of this general map to an array.
Copies values of this general map to an array.
Fills the given array xs with values of this general map.
Copying will stop once either the end of the current general map is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the type of the elements of the array.
the array to fill.
Counts the number of elements in the general map which satisfy a predicate.
Counts the number of elements in the general map which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p.
Selects all elements except first n ones.
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to drop from this general map.
a general map consisting of all elements of this general map except the first n ones, or else the
empty general map, if this general map has less than n elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the longest suffix of this general map whose first element
does not satisfy the predicate p.
Selects all elements of this general map which satisfy a predicate.
Selects all elements of this general map which satisfy a predicate.
a new general map consisting of all elements of this general map that satisfy the given
predicate p. Their order may not be preserved.
Selects all elements of this general map which do not satisfy a predicate.
Selects all elements of this general map which do not satisfy a predicate.
a new general map consisting of all elements of this general map that do not satisfy the given
predicate p. Their order may not be preserved.
Finds the first element of the general map satisfying a predicate, if any.
Finds the first element of the general map satisfying a predicate, if any.
Note: may not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
an option value containing the first element in the general map
that satisfies p, or None if none exists.
Builds a new collection by applying a function to all elements of this general map and concatenating the results.
Builds a new collection by applying a function to all elements of this general map and concatenating the results.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element.
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
a new collection of type That resulting from applying the given collection-valued function
f to each element of this general map and concatenating the results.
Folds the elements of this sequence using the specified associative binary operator.
Folds the elements of this sequence using the specified associative binary operator. The order in which the elements are reduced is unspecified and may be nondeterministic.
Note this method has a different signature than the foldLeft
and foldRight methods of the trait Traversable.
The result of folding may only be a supertype of this parallel collection's
type parameter T.
a neutral element for the fold operation, it may be added to the result
an arbitrary number of times, not changing the result (e.g. Nil for list concatenation,
0 for addition, or 1 for multiplication)
a binary operator that must be associative
the result of applying fold operator op between all the elements and z
Applies a binary operator to a start value and all elements of this general map, going left to right.
Applies a binary operator to a start value and all elements of this general map, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this general map,
going left to right with the start value z on the left:
op(...op(z, x,,1,,), x,,2,,, ..., x,,n,,)
where x,,1,,, ..., x,,n,, are the elements of this general map.
Applies a binary operator to all elements of this general map and a start value, going right to left.
Applies a binary operator to all elements of this general map and a start value, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this general map,
going right to left with the start value z on the right:
op(x,,1,,, op(x,,2,,, ... op(x,,n,,, z)...))
where x,,1,,, ..., x,,n,, are the elements of this general map.
Applies a function f to all elements of this general map.
Applies a function f to all elements of this general map.
the type parameter describing the result of function f.
This result will always be ignored. Typically U is Unit,
but this is not necessary.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Partitions this general map into a map of general maps according to some discriminator function.
Partitions this general map into a map of general maps according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new general map.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to general maps such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k)
That is, every key k is bound to a general map of those elements x
for which f(x) equals k.
Builds a new collection by applying a function to all elements of this general map.
Builds a new collection by applying a function to all elements of this general map.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element.
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
a new collection of type That resulting from applying the given function
f to each element of this general map and collecting the results.
Finds the largest element.
Finds the largest element.
the largest element of this general map with respect to the ordering cmp.
Finds the smallest element.
Finds the smallest element.
the smallest element of this general map with respect to the ordering cmp.
Displays all elements of this general map in a string.
Displays all elements of this general map in a string.
a string representation of this general map. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this general map follow each other without any
separator string.
Displays all elements of this general map in a string using a separator string.
Displays all elements of this general map in a string using a separator string.
the separator string.
a string representation of this general map. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this general map are separated by the string sep.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this general map in a string using start, end, and separator strings.
Displays all elements of this general map in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this general map. The resulting string
begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method
toString) of all elements of this general map are separated by
the string sep.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Tests whether the general map is not empty.
Tests whether the general map is not empty.
true if the general map contains at least one element, false otherwise.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this general map in two general maps according to a predicate.
Partitions this general map in two general maps according to a predicate.
a pair of general maps: the first general map consists of all elements that
satisfy the predicate p and the second general map consists of all elements
that don't. The relative order of the elements in the resulting general maps
may not be preserved.
Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
an implicit parameter defining a set of numeric operations
which includes the * operator to be used in forming the product.
the product of all elements of this general map with respect to the * operator in num.
Reduces the elements of this sequence using the specified associative binary operator.
Reduces the elements of this sequence using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note this method has a different signature than the reduceLeft
and reduceRight methods of the trait Traversable.
The result of reducing may only be a supertype of this parallel collection's
type parameter T.
A binary operator that must be associative.
The result of applying reduce operator op between all the elements if the collection is nonempty.
Optionally applies a binary operator to all elements of this general map, going left to right.
Optionally applies a binary operator to all elements of this general map, going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op) is this general map is nonempty,
None otherwise.
Optionally reduces the elements of this sequence using the specified associative binary operator.
Optionally reduces the elements of this sequence using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note this method has a different signature than the reduceLeftOption
and reduceRightOption methods of the trait Traversable.
The result of reducing may only be a supertype of this parallel collection's
type parameter T.
A binary operator that must be associative.
An option value containing result of applying reduce operator op between all
the elements if the collection is nonempty, and None otherwise.
Applies a binary operator to all elements of this general map, going right to left.
Applies a binary operator to all elements of this general map, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this general map,
going right to left:
op(x,,1,,, op(x,,2,,, ..., op(x,,n-1,,, x,,n,,)...))
where x,,1,,, ..., x,,n,, are the elements of this general map.
Optionally applies a binary operator to all elements of this general map, going right to left.
Optionally applies a binary operator to all elements of this general map, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op) is this general map is nonempty,
None otherwise.
Checks if the other iterable collection contains the same elements in the same order as this general map.
Checks if the other iterable collection contains the same elements in the same order as this general map.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Note: will not terminate for infinite-sized collections.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new general map containing the prefix scan of the elements in this general map
Produces a collection containing cummulative results of applying the operator going left to right.
Produces a collection containing cummulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
Produces a collection containing cummulative results of applying the operator going right to left.
Produces a collection containing cummulative results of applying the operator going right to left. The head of the collection is the last cummulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
"This scanRight definition has changed in 2.9.\n" + "The previous behavior can be reproduced with scanRight.reverse."
The size of this general map.
The size of this general map.
Note: will not terminate for infinite-sized collections.
the number of elements in this general map.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x which satisfy the invariant:
from <= indexOf(x) < until
Note: might return different results for different runs, unless the underlying collection type is ordered.
a general map containing the elements greater than or equal to
index from extending up to (but not including) index until
of this general map.
Splits this general map into a prefix/suffix pair according to a predicate.
Splits this general map into a prefix/suffix pair according to a predicate.
Note: c span p is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p), provided the evaluation of the
predicate p does not cause any side-effects.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a pair consisting of the longest prefix of this general map whose
elements all satisfy p, and the rest of this general map.
Splits this general map into two at a given position.
Splits this general map into two at a given position.
Note: c splitAt n is equivalent to (but possibly more efficient than)
(c take n, c drop n).
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of general maps consisting of the first n
elements of this general map, and the other elements.
Defines the prefix of this object's toString representation.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString
applied to this general map. By default the string prefix is the
simple name of the collection class general map.
Sums up the elements of this collection.
Sums up the elements of this collection.
an implicit parameter defining a set of numeric operations
which includes the + operator to be used in forming the sum.
the sum of all elements of this general map with respect to the + operator in num.
Selects first n elements.
Selects first n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Tt number of elements to take from this general map.
a general map consisting only of the first n elements of this general map,
or else the whole general map, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the longest prefix of this general map whose elements all satisfy
the predicate p.
Converts this general map to an array.
Converts this general map to an array.
Note: will not terminate for infinite-sized collections.
an array containing all elements of this general map.
Converts this general map to a mutable buffer.
Converts this general map to a mutable buffer.
Note: will not terminate for infinite-sized collections.
a buffer containing all elements of this general map.
Converts this general map to an indexed sequence.
Converts this general map to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this general map.
Converts this general map to an iterable collection.
Converts this general map to an iterable collection. Note that
the choice of target Iterable is lazy in this default implementation
as this TraversableOnce may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
Note: will not terminate for infinite-sized collections.
an Iterable containing all elements of this general map.
Returns an Iterator over the elements in this general map.
Returns an Iterator over the elements in this general map. Will return the same Iterator if this instance is already an Iterator.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this general map.
Converts this general map to a list.
Converts this general map to a list.
Note: will not terminate for infinite-sized collections.
a list containing all elements of this general map.
Converts this general map to a map.
Converts this general map to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
Note: will not terminate for infinite-sized collections.
a map containing all elements of this general map.
Converts this general map to a sequence.
Converts this general map to a sequence. As with toIterable, it's lazy
in this default implementation, as this TraversableOnce may be
lazy and unevaluated.
Note: will not terminate for infinite-sized collections.
a sequence containing all elements of this general map.
Converts this general map to a set.
Converts this general map to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this general map.
Converts this general map to a stream.
Converts this general map to a stream.
Note: will not terminate for infinite-sized collections.
a stream containing all elements of this general map.
Converts this general map to an unspecified Traversable.
Converts this general map to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this general map.
Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs.
Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A).
the type of the second half of the returned pairs
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type (A1, B) being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, B), That].
is found.
The iterable providing the second half of each result pair
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr
and the new element type (A1, B).
a new collection of type That containing pairs consisting of
corresponding elements of this general map and that. The length
of the returned collection is the minimum of the lengths of this general map and that.
Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs.
Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this general map is shorter than that.
the element to be used to fill up the result if that is shorter than this general map.
a new collection of type That containing pairs consisting of
corresponding elements of this general map and that. The length
of the returned collection is the maximum of the lengths of this general map and that.
If this general map is shorter than that, thisElem values are used to pad the result.
If that is shorter than this general map, thatElem values are used to pad the result.
Zips this general map with its indices.
Zips this general map with its indices.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A).
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type (A1, Int) being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, Int), That].
is found.
A new collection of type That containing pairs consisting of all elements of this
general map paired with their index. Indices start at 0.
Test two objects for inequality.
Test two objects for inequality.
true if !(this == that), false otherwise.
Equivalent to x.hashCode except for boxed numeric types.
Equivalent to x.hashCode except for boxed numeric types.
For numerics, it returns a hash value which is consistent
with value equality: if two value type instances compare
as true, then ## will produce the same hash value for each
of them.
a hash value consistent with ==
[use case] Concatenates this general map with the elements of a traversable collection.
Concatenates this general map with the elements of a traversable collection.
the element type of the returned collection.
the traversable to append.
a new collection of type That which contains all elements
of this general map followed by all elements of that.
A syntactic sugar for out of order folding.
A syntactic sugar for out of order folding. See fold.
Test two objects for equality.
Test two objects for equality.
true if the receiver object is equivalent to the argument; false otherwise.
Cast the receiver object to be of type T0.
Cast the receiver object to be of type T0.
Note that the success of a cast at runtime is modulo Scala's erasure semantics.
Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at
runtime, while the expression List(1).asInstanceOf[List[String]] will not.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the requested type.
the receiver object.
Create a copy of the receiver object.
[use case] Builds a new collection by applying a partial function to all elements of this general map on which the function is defined.
Builds a new collection by applying a partial function to all elements of this general map on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the general map.
a new collection of type That resulting from applying the partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
[use case] Copies values of this general map to an array.
Copies values of this general map to an array.
Fills the given array xs with values of this general map, beginning at index start.
Copying will stop once either the end of the current general map is reached,
or the end of the array is reached.
the array to fill.
the starting index.
[use case] Copies values of this general map to an array.
Copies values of this general map to an array.
Fills the given array xs with values of this general map.
Copying will stop once either the end of the current general map is reached,
or the end of the array is reached.
the array to fill.
Tests whether the argument (arg0) is a reference to the receiver object (this).
Tests whether the argument (arg0) is a reference to the receiver object (this).
The eq method implements an equivalence relation on
non-null instances of AnyRef, and has three additional properties:
x and y of type AnyRef, multiple invocations of
x.eq(y) consistently returns true or consistently returns false.x of type AnyRef, x.eq(null) and null.eq(x) returns false.null.eq(null) returns true. When overriding the equals or hashCode methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they
should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).
true if the argument is a reference to the receiver object; false otherwise.
Compares two maps structurally; i.
Compares two maps structurally; i.e. checks if all mappings contained in this map are also contained in the other map, and vice versa.
the other map
true if both maps contain exactly the
same mappings, false otherwise.
Called by the garbage collector on the receiver object when there are no more references to the object.
Called by the garbage collector on the receiver object when there are no more references to the object.
The details of when and if the finalize method is invoked, as
well as the interaction between finalize and non-local returns
and exceptions, are all platform dependent.
[use case] Builds a new collection by applying a function to all elements of this general map and concatenating the results.
Builds a new collection by applying a function to all elements of this general map and concatenating the results.
the element type of the returned collection.
the function to apply to each element.
a new collection of type That resulting from applying the given collection-valued function
f to each element of this general map and concatenating the results.
[use case] Applies a function f to all elements of this general map.
Applies a function f to all elements of this general map.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
A representation that corresponds to the dynamic class of the receiver object.
A representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
The hashCode method for reference types.
The hashCode method for reference types. See hashCode in Any.
the hash code value for this object.
Tests whether the general map is empty.
Tests whether the general map is empty.
true if the general map contains no elements, false otherwise.
Test whether the dynamic type of the receiver object is T0.
Test whether the dynamic type of the receiver object is T0.
Note that the result of the test is modulo Scala's erasure semantics.
Therefore the expression 1.isInstanceOf[String] will return false, while the
expression List(1).isInstanceOf[List[String]] will return true.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the specified type.
true if the receiver object is an instance of erasure of type T0; false otherwise.
Tests whether this general map can be repeatedly traversed.
Tests whether this general map can be repeatedly traversed.
true
[use case] Builds a new collection by applying a function to all elements of this general map.
Builds a new collection by applying a function to all elements of this general map.
the element type of the returned collection.
the function to apply to each element.
a new collection of type That resulting from applying the given function
f to each element of this general map and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this general map with respect to the ordering cmp.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this general map with respect to the ordering cmp.
Equivalent to !(this eq that).
Equivalent to !(this eq that).
true if the argument is not a reference to the receiver object; false otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray or mutable.ParHashMap) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements of this general map with respect to the * operator in num.
[use case] Checks if the other iterable collection contains the same elements in the same order as this general map.
Checks if the other iterable collection contains the same elements in the same order as this general map.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements of this general map with respect to the + operator in num.
Selects all elements except the first.
Selects all elements except the first.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a general map consisting of all elements of this general map except the first one.
[use case] Converts this general map to an array.
Converts this general map to an array.
Note: will not terminate for infinite-sized collections.
an array containing all elements of this general map.
[use case] Converts this general map to a map.
Converts this general map to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
Note: will not terminate for infinite-sized collections.
a map containing all elements of this general map.
Creates a String representation of this object.
Creates a String representation of this object. The default representation is platform dependent. On the java platform it is the concatenation of the class name, "@", and the object's hashcode in hexadecimal.
a String representation of the object.
[use case] Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs.
Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new collection of type That containing pairs consisting of
corresponding elements of this general map and that. The length
of the returned collection is the minimum of the lengths of this general map and that.
[use case] Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs.
Returns a general map formed from this general map and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this general map is shorter than that.
the element to be used to fill up the result if that is shorter than this general map.
a new collection of type That containing pairs consisting of
corresponding elements of this general map and that. The length
of the returned collection is the maximum of the lengths of this general map and that.
If this general map is shorter than that, thisElem values are used to pad the result.
If that is shorter than this general map, thatElem values are used to pad the result.
[use case] Zips this general map with its indices.
Zips this general map with its indices.
A new collection of type That containing pairs consisting of all elements of this
general map paired with their index. Indices start at 0.
A trait for all maps upon which operations may be implemented in parallel.