- getAction() - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The action performed by the reporting mail transfer agent (MTA) as a
result of its attempt to deliver the message to the recipient address.
- getActionName() - Method in enum com.amazonaws.auth.policy.actions.SimpleEmailServiceActions
-
- getActions() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
An ordered list of actions to perform on messages that match at least one
of the recipient email addresses or domains specified in the receipt
rule.
- getAddHeaderAction() - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Adds a header to the received email.
- getAfter() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
The name of an existing rule after which the new rule will be placed.
- getAfter() - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule after which to place the specified receipt
rule.
- getArrivalDate() - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
When the message was received by the reporting mail transfer agent (MTA),
in
RFC 822 date-time
format.
- getBccAddresses() - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The BCC: field(s) of the message.
- getBehaviorOnMXFailure() - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The action that Amazon SES takes if it cannot successfully read the
required MX record when you send an email.
- getBehaviorOnMXFailure() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The action that you want Amazon SES to take if it cannot successfully
read the required MX record when you send an email.
- getBody() - Method in class com.amazonaws.services.simpleemail.model.Message
-
The message body.
- getBounceAction() - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Rejects the received email by returning a bounce response to the sender
and, optionally, publishes a notification to Amazon Simple Notification
Service (Amazon SNS).
- getBouncedRecipientInfoList() - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
A list of recipients of the bounced message, including the information
required to create the Delivery Status Notifications (DSNs) for the
recipients.
- getBounces() - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails that have bounced.
- getBounceSender() - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
The address to use in the "From" header of the bounce message.
- getBounceSenderArn() - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
This parameter is used only for sending authorization.
- getBounceTopic() - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish bounce notifications.
- getBounceType() - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
The reason for the bounce.
- getBucket() - Method in exception com.amazonaws.services.simpleemail.model.InvalidS3ConfigurationException
-
Returns the value of the bucket property for this object.
- getBucketName() - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The name of the Amazon S3 bucket to which to save the received email.
- getCachedResponseMetadata(AmazonWebServiceRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Returns additional metadata for a previously executed successful request,
typically used for debugging issues where a service isn't acting as
expected.
- getCachedResponseMetadata(AmazonWebServiceRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
- getCcAddresses() - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The CC: field(s) of the message.
- getCharset() - Method in class com.amazonaws.services.simpleemail.model.Content
-
The character set of the content.
- getCidr() - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
A single IP address or a range of IP addresses that you want to block or
allow, specified in Classless Inter-Domain Routing (CIDR) notation.
- getComplaints() - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of unwanted emails that were rejected by recipients.
- getComplaintTopic() - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish complaint notifications.
- getCreatedTimestamp() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRuleSetMetadata
-
The date and time the receipt rule set was created.
- getData() - Method in class com.amazonaws.services.simpleemail.model.Content
-
The textual data of the content.
- getData() - Method in class com.amazonaws.services.simpleemail.model.RawMessage
-
The raw data of the message.
- getDeliveryAttempts() - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails that have been enqueued for sending.
- getDeliveryTopic() - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish delivery notifications.
- getDestination() - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The destination for this email, composed of To:, CC:, and BCC: fields.
- getDestinations() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
A list of destinations for the message, consisting of To:, CC:, and BCC:
addresses.
- getDiagnosticCode() - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
An extended explanation of what went wrong; this is usually an SMTP
response.
- getDkimAttributes() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesResult
-
The DKIM attributes for an email address or a domain.
- getDkimEnabled() - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
True if DKIM signing is enabled for email sent from the identity; false
otherwise.
- getDkimEnabled() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledRequest
-
Sets whether DKIM signing is enabled for an identity.
- getDkimTokens() - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
A set of character strings that represent the domain's identity.
- getDkimTokens() - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimResult
-
A set of character strings that represent the domain's identity.
- getDkimVerificationStatus() - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
Describes whether Amazon SES has successfully verified the DKIM DNS
records (tokens) published in the domain name's DNS.
- getDomain() - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimRequest
-
The name of the domain to be verified for Easy DKIM signing.
- getDomain() - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainIdentityRequest
-
The domain to be verified.
- getEmailAddress() - Method in class com.amazonaws.services.simpleemail.model.DeleteVerifiedEmailAddressRequest
-
An email address to be removed from the list of verified addresses.
- getEmailAddress() - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailAddressRequest
-
The email address to be verified.
- getEmailAddress() - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailIdentityRequest
-
The email address to be verified.
- getEnabled() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
If true, the receipt rule is active.
- getEnabled() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
Sets whether Amazon SES includes the original email headers in Amazon SNS
notifications of the specified notification type.
- getEncoding() - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
The encoding to use for the email within the Amazon SNS notification.
- getExecutorService() - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the executor service used by this async client to execute
requests.
- getExplanation() - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
Human-readable text for the bounce message to explain the failure.
- getExtensionFields() - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
Additional X-headers to include in the DSN.
- getExtensionFields() - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
Additional X-headers to include in the DSN.
- getFilter() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptFilterRequest
-
A data structure that describes the IP address filter to create, which
consists of a name, an IP address range, and whether to allow or block
mail from it.
- getFilterName() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptFilterRequest
-
The name of the IP address filter to delete.
- getFilters() - Method in class com.amazonaws.services.simpleemail.model.ListReceiptFiltersResult
-
A list of IP address filter data structures, which each consist of a
name, an IP address range, and whether to allow or block mail from it.
- getFinalRecipient() - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The email address to which the message was ultimately delivered.
- getForwardingEnabled() - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES will forward bounce and complaint
notifications as email.
- getForwardingEnabled() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledRequest
-
Sets whether Amazon SES will forward bounce and complaint notifications
as email.
- getFromArn() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- getFunctionArn() - Method in exception com.amazonaws.services.simpleemail.model.InvalidLambdaFunctionException
-
Returns the value of the functionArn property for this object.
- getFunctionArn() - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The Amazon Resource Name (ARN) of the AWS Lambda function.
- getHeaderName() - Method in class com.amazonaws.services.simpleemail.model.AddHeaderAction
-
The name of the header to add.
- getHeadersInBounceNotificationsEnabled() - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Bounce.
- getHeadersInComplaintNotificationsEnabled() - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Complaint.
- getHeadersInDeliveryNotificationsEnabled() - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Delivery.
- getHeaderValue() - Method in class com.amazonaws.services.simpleemail.model.AddHeaderAction
-
Must be less than 2048 characters, and must not contain newline
characters ("\r" or "\n").
- getHtml() - Method in class com.amazonaws.services.simpleemail.model.Body
-
The content of the message, in HTML format.
- getIdentities() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesRequest
-
A list of one or more verified identities - email addresses, domains, or
both.
- getIdentities() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesRequest
-
A list of one or more identities.
- getIdentities() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesRequest
-
A list of one or more identities.
- getIdentities() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesRequest
-
A list of identities.
- getIdentities() - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesResult
-
A list of identities.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityPolicyRequest
-
The identity that is associated with the policy that you want to delete.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityRequest
-
The identity to be removed from the list of identities for the AWS
Account.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
The identity for which the policies will be retrieved.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesRequest
-
The identity that is associated with the policy for which the policies
will be listed.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The identity to which the policy will apply.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledRequest
-
The identity for which DKIM signing should be enabled or disabled.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledRequest
-
The identity for which to set bounce and complaint notification
forwarding.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
The identity for which to enable or disable headers in notifications.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The verified identity for which you want to enable or disable the
specified custom MAIL FROM domain.
- getIdentity() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The identity for which the Amazon SNS topic will be set.
- getIdentityDkimAttributes(GetIdentityDkimAttributesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Returns the current status of Easy DKIM signing for an entity.
- getIdentityDkimAttributes(GetIdentityDkimAttributesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Returns the current status of Easy DKIM signing for an entity.
- getIdentityDkimAttributesAsync(GetIdentityDkimAttributesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the current status of Easy DKIM signing for an entity.
- getIdentityDkimAttributesAsync(GetIdentityDkimAttributesRequest, AsyncHandler<GetIdentityDkimAttributesRequest, GetIdentityDkimAttributesResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the current status of Easy DKIM signing for an entity.
- getIdentityDkimAttributesAsync(GetIdentityDkimAttributesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the current status of Easy DKIM signing for an entity.
- getIdentityDkimAttributesAsync(GetIdentityDkimAttributesRequest, AsyncHandler<GetIdentityDkimAttributesRequest, GetIdentityDkimAttributesResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the current status of Easy DKIM signing for an entity.
- GetIdentityDkimAttributesRequest - Class in com.amazonaws.services.simpleemail.model
-
Returns the current status of Easy DKIM signing for an entity.
- GetIdentityDkimAttributesRequest() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesRequest
-
- GetIdentityDkimAttributesResult - Class in com.amazonaws.services.simpleemail.model
-
Represents the status of Amazon SES Easy DKIM signing for an identity.
- GetIdentityDkimAttributesResult() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesResult
-
- getIdentityMailFromDomainAttributes(GetIdentityMailFromDomainAttributesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Returns the custom MAIL FROM attributes for a list of identities (email
addresses and/or domains).
- getIdentityMailFromDomainAttributes(GetIdentityMailFromDomainAttributesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Returns the custom MAIL FROM attributes for a list of identities (email
addresses and/or domains).
- getIdentityMailFromDomainAttributesAsync(GetIdentityMailFromDomainAttributesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the custom MAIL FROM attributes for a list of identities (email
addresses and/or domains).
- getIdentityMailFromDomainAttributesAsync(GetIdentityMailFromDomainAttributesRequest, AsyncHandler<GetIdentityMailFromDomainAttributesRequest, GetIdentityMailFromDomainAttributesResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the custom MAIL FROM attributes for a list of identities (email
addresses and/or domains).
- getIdentityMailFromDomainAttributesAsync(GetIdentityMailFromDomainAttributesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the custom MAIL FROM attributes for a list of identities (email
addresses and/or domains).
- getIdentityMailFromDomainAttributesAsync(GetIdentityMailFromDomainAttributesRequest, AsyncHandler<GetIdentityMailFromDomainAttributesRequest, GetIdentityMailFromDomainAttributesResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the custom MAIL FROM attributes for a list of identities (email
addresses and/or domains).
- GetIdentityMailFromDomainAttributesRequest - Class in com.amazonaws.services.simpleemail.model
-
Returns the custom MAIL FROM attributes for a list of identities (email
addresses and/or domains).
- GetIdentityMailFromDomainAttributesRequest() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesRequest
-
- GetIdentityMailFromDomainAttributesResult - Class in com.amazonaws.services.simpleemail.model
-
Represents the custom MAIL FROM attributes for a list of identities.
- GetIdentityMailFromDomainAttributesResult() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesResult
-
- getIdentityNotificationAttributes(GetIdentityNotificationAttributesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Given a list of verified identities (email addresses and/or domains),
returns a structure describing identity notification attributes.
- getIdentityNotificationAttributes(GetIdentityNotificationAttributesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Given a list of verified identities (email addresses and/or domains),
returns a structure describing identity notification attributes.
- getIdentityNotificationAttributesAsync(GetIdentityNotificationAttributesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given a list of verified identities (email addresses and/or domains),
returns a structure describing identity notification attributes.
- getIdentityNotificationAttributesAsync(GetIdentityNotificationAttributesRequest, AsyncHandler<GetIdentityNotificationAttributesRequest, GetIdentityNotificationAttributesResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given a list of verified identities (email addresses and/or domains),
returns a structure describing identity notification attributes.
- getIdentityNotificationAttributesAsync(GetIdentityNotificationAttributesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given a list of verified identities (email addresses and/or domains),
returns a structure describing identity notification attributes.
- getIdentityNotificationAttributesAsync(GetIdentityNotificationAttributesRequest, AsyncHandler<GetIdentityNotificationAttributesRequest, GetIdentityNotificationAttributesResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given a list of verified identities (email addresses and/or domains),
returns a structure describing identity notification attributes.
- GetIdentityNotificationAttributesRequest - Class in com.amazonaws.services.simpleemail.model
-
Given a list of verified identities (email addresses and/or domains), returns
a structure describing identity notification attributes.
- GetIdentityNotificationAttributesRequest() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesRequest
-
- GetIdentityNotificationAttributesResult - Class in com.amazonaws.services.simpleemail.model
-
Represents the notification attributes for a list of identities.
- GetIdentityNotificationAttributesResult() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesResult
-
- getIdentityPolicies(GetIdentityPoliciesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Returns the requested sending authorization policies for the given
identity (an email address or a domain).
- getIdentityPolicies(GetIdentityPoliciesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Returns the requested sending authorization policies for the given
identity (an email address or a domain).
- getIdentityPoliciesAsync(GetIdentityPoliciesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the requested sending authorization policies for the given
identity (an email address or a domain).
- getIdentityPoliciesAsync(GetIdentityPoliciesRequest, AsyncHandler<GetIdentityPoliciesRequest, GetIdentityPoliciesResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the requested sending authorization policies for the given
identity (an email address or a domain).
- getIdentityPoliciesAsync(GetIdentityPoliciesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the requested sending authorization policies for the given
identity (an email address or a domain).
- getIdentityPoliciesAsync(GetIdentityPoliciesRequest, AsyncHandler<GetIdentityPoliciesRequest, GetIdentityPoliciesResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the requested sending authorization policies for the given
identity (an email address or a domain).
- GetIdentityPoliciesRequest - Class in com.amazonaws.services.simpleemail.model
-
Returns the requested sending authorization policies for the given identity
(an email address or a domain).
- GetIdentityPoliciesRequest() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
- GetIdentityPoliciesResult - Class in com.amazonaws.services.simpleemail.model
-
Represents the requested sending authorization policies.
- GetIdentityPoliciesResult() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesResult
-
- getIdentityType() - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The type of the identities to list.
- getIdentityVerificationAttributes(GetIdentityVerificationAttributesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Given a list of identities (email addresses and/or domains), returns the
verification status and (for domain identities) the verification token
for each identity.
- getIdentityVerificationAttributes(GetIdentityVerificationAttributesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Given a list of identities (email addresses and/or domains), returns the
verification status and (for domain identities) the verification token
for each identity.
- getIdentityVerificationAttributesAsync(GetIdentityVerificationAttributesRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given a list of identities (email addresses and/or domains), returns the
verification status and (for domain identities) the verification token
for each identity.
- getIdentityVerificationAttributesAsync(GetIdentityVerificationAttributesRequest, AsyncHandler<GetIdentityVerificationAttributesRequest, GetIdentityVerificationAttributesResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given a list of identities (email addresses and/or domains), returns the
verification status and (for domain identities) the verification token
for each identity.
- getIdentityVerificationAttributesAsync(GetIdentityVerificationAttributesRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given a list of identities (email addresses and/or domains), returns the
verification status and (for domain identities) the verification token
for each identity.
- getIdentityVerificationAttributesAsync(GetIdentityVerificationAttributesRequest, AsyncHandler<GetIdentityVerificationAttributesRequest, GetIdentityVerificationAttributesResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given a list of identities (email addresses and/or domains), returns the
verification status and (for domain identities) the verification token
for each identity.
- GetIdentityVerificationAttributesRequest - Class in com.amazonaws.services.simpleemail.model
-
Given a list of identities (email addresses and/or domains), returns the
verification status and (for domain identities) the verification token for
each identity.
- GetIdentityVerificationAttributesRequest() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesRequest
-
- GetIdentityVerificationAttributesResult - Class in com.amazonaws.services.simpleemail.model
-
The Amazon SES verification status of a list of identities.
- GetIdentityVerificationAttributesResult() - Constructor for class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesResult
-
- getInvocationType() - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The invocation type of the AWS Lambda function.
- getIpFilter() - Method in class com.amazonaws.services.simpleemail.model.ReceiptFilter
-
A structure that provides the IP addresses to block or allow, and whether
to block or allow incoming mail from them.
- getKmsKeyArn() - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The customer master key that Amazon SES should use to encrypt your emails
before saving them to the Amazon S3 bucket.
- getLambdaAction() - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Calls an AWS Lambda function, and optionally, publishes a notification to
Amazon SNS.
- getLastAttemptDate() - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The time the final delivery attempt was made, in
RFC 822 date-time format.
- getMailFromDomain() - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The custom MAIL FROM domain that the identity is configured to use.
- getMailFromDomain() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The custom MAIL FROM domain that you want the verified identity to use.
- getMailFromDomainAttributes() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesResult
-
A map of identities to custom MAIL FROM attributes.
- getMailFromDomainStatus() - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The state that indicates whether Amazon SES has successfully read the MX
record required for custom MAIL FROM domain setup.
- getMax24HourSend() - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The maximum number of emails the user is allowed to send in a 24-hour
interval.
- getMaxItems() - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The maximum number of identities per page.
- getMaxSendRate() - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The maximum number of emails that Amazon SES can accept from the user's
account per second.
- getMessage() - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
Human-readable text to include in the bounce message.
- getMessage() - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The message to be sent.
- getMessageDsn() - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
Message-related DSN fields.
- getMessageId() - Method in class com.amazonaws.services.simpleemail.model.SendBounceResult
-
The message ID of the bounce message.
- getMessageId() - Method in class com.amazonaws.services.simpleemail.model.SendEmailResult
-
The unique message identifier returned from the SendEmail
action.
- getMessageId() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailResult
-
The unique message identifier returned from the SendRawEmail
action.
- getMetadata() - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetResult
-
The metadata for the currently active receipt rule set.
- getMetadata() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetResult
-
The metadata for the receipt rule set, which consists of the rule set
name and the timestamp of when the rule set was created.
- getName() - Method in exception com.amazonaws.services.simpleemail.model.AlreadyExistsException
-
Returns the value of the name property for this object.
- getName() - Method in exception com.amazonaws.services.simpleemail.model.CannotDeleteException
-
Returns the value of the name property for this object.
- getName() - Method in class com.amazonaws.services.simpleemail.model.ExtensionField
-
The name of the header to add.
- getName() - Method in class com.amazonaws.services.simpleemail.model.ReceiptFilter
-
The name of the IP address filter.
- getName() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
The name of the receipt rule.
- getName() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRuleSetMetadata
-
The name of the receipt rule set.
- getName() - Method in exception com.amazonaws.services.simpleemail.model.RuleDoesNotExistException
-
Returns the value of the name property for this object.
- getName() - Method in exception com.amazonaws.services.simpleemail.model.RuleSetDoesNotExistException
-
Returns the value of the name property for this object.
- getNextToken() - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The token to use for pagination.
- getNextToken() - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesResult
-
The token used for pagination.
- getNextToken() - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsRequest
-
A token returned from a previous call to ListReceiptRuleSets
to indicate the position in the receipt rule set list.
- getNextToken() - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsResult
-
A token indicating that there are additional receipt rule sets available
to be listed.
- getNotificationAttributes() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesResult
-
A map of Identity to IdentityNotificationAttributes.
- getNotificationType() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
The notification type for which to enable or disable headers in
notifications.
- getNotificationType() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The type of notifications that will be published to the specified Amazon
SNS topic.
- getObjectKeyPrefix() - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The key prefix of the Amazon S3 bucket.
- getOrganizationArn() - Method in class com.amazonaws.services.simpleemail.model.WorkmailAction
-
The ARN of the Amazon WorkMail organization.
- getOriginalMessageId() - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
The message ID of the message to be bounced.
- getOriginalRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.CloneReceiptRuleSetRequest
-
The name of the rule set to clone.
- getPolicies() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesResult
-
A map of policy names to policies.
- getPolicy() - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The text of the policy in JSON format.
- getPolicy() - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
Indicates whether to block or allow incoming mail from the specified IP
addresses.
- getPolicyName() - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityPolicyRequest
-
The name of the policy to be deleted.
- getPolicyName() - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The name of the policy.
- getPolicyNames() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
A list of the names of policies to be retrieved.
- getPolicyNames() - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesResult
-
A list of names of policies that apply to the specified identity.
- getRawMessage() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
The raw text of the message.
- getRecipient() - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
The email address of the recipient of the bounced email.
- getRecipientArn() - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
This parameter is used only for sending authorization.
- getRecipientDsnFields() - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
Recipient-related DSN fields, most of which would normally be filled in
automatically when provided with a BounceType.
- getRecipients() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
The recipient domains and email addresses to which the receipt rule
applies.
- getRejects() - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails rejected by Amazon SES.
- getRemoteMta() - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The MTA to which the remote MTA attempted to deliver the message,
formatted as specified in
RFC 3464 (
mta-name-type; mta-name).
- getReplyToAddresses() - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The reply-to email address(es) for the message.
- getReportingMta() - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
The reporting MTA that attempted to deliver the message, formatted as
specified in
RFC 3464 (
mta-name-type; mta-name).
- getReturnPath() - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The email address to which bounces and complaints are to be forwarded
when feedback forwarding is enabled.
- getReturnPathArn() - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
This parameter is used only for sending authorization.
- getReturnPathArn() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- getRule() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
A data structure that contains the specified rule's name, actions,
recipients, domains, enabled status, scan status, and TLS policy.
- getRule() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleResult
-
A data structure that contains the specified receipt rule's name,
actions, recipients, domains, enabled status, scan status, and Transport
Layer Security (TLS) policy.
- getRule() - Method in class com.amazonaws.services.simpleemail.model.UpdateReceiptRuleRequest
-
A data structure that contains the updated receipt rule information.
- getRuleName() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleRequest
-
The name of the receipt rule to delete.
- getRuleName() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleRequest
-
The name of the receipt rule.
- getRuleName() - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule to reposition.
- getRuleNames() - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetRequest
-
A list of the specified receipt rule set's receipt rules in the order
that you want to put them.
- getRules() - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetResult
-
The receipt rules that belong to the active rule set.
- getRules() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetResult
-
A list of the receipt rules that belong to the specified receipt rule
set.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.CloneReceiptRuleSetRequest
-
The name of the rule set to create.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
The name of the rule set to which to add the rule.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleSetRequest
-
The name of the rule set to create.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleRequest
-
The name of the receipt rule set that contains the receipt rule to
delete.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleSetRequest
-
The name of the receipt rule set to delete.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleRequest
-
The name of the receipt rule set to which the receipt rule belongs.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetRequest
-
The name of the receipt rule set to describe.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetRequest
-
The name of the receipt rule set to reorder.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.SetActiveReceiptRuleSetRequest
-
The name of the receipt rule set to make active.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule set that contains the receipt rule to
reposition.
- getRuleSetName() - Method in class com.amazonaws.services.simpleemail.model.UpdateReceiptRuleRequest
-
The name of the receipt rule set to which the receipt rule belongs.
- getRuleSets() - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsResult
-
The metadata for the currently active receipt rule set.
- getS3Action() - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Saves the received message to an Amazon Simple Storage Service (Amazon
S3) bucket and, optionally, publishes a notification to Amazon SNS.
- getScanEnabled() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
If true, then messages to which this receipt rule applies
are scanned for spam and viruses.
- getScope() - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
The scope to which the Stop action applies.
- getSendDataPoints() - Method in class com.amazonaws.services.simpleemail.model.GetSendStatisticsResult
-
A list of data points, each of which represents 15 minutes of activity.
- getSender() - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The email address of the sender of the bounced email.
- getSendQuota(GetSendQuotaRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Returns the user's current sending limits.
- getSendQuota() - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Returns the user's current sending limits.
- getSendQuota(GetSendQuotaRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Returns the user's current sending limits.
- getSendQuota() - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Returns the user's current sending limits.
- getSendQuotaAsync(GetSendQuotaRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the user's current sending limits.
- getSendQuotaAsync(GetSendQuotaRequest, AsyncHandler<GetSendQuotaRequest, GetSendQuotaResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the user's current sending limits.
- getSendQuotaAsync(GetSendQuotaRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the user's current sending limits.
- getSendQuotaAsync(GetSendQuotaRequest, AsyncHandler<GetSendQuotaRequest, GetSendQuotaResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the user's current sending limits.
- GetSendQuotaRequest - Class in com.amazonaws.services.simpleemail.model
-
Returns the user's current sending limits.
- GetSendQuotaRequest() - Constructor for class com.amazonaws.services.simpleemail.model.GetSendQuotaRequest
-
- GetSendQuotaResult - Class in com.amazonaws.services.simpleemail.model
-
Represents your Amazon SES daily sending quota, maximum send rate, and the
number of emails you have sent in the last 24 hours.
- GetSendQuotaResult() - Constructor for class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
- getSendStatistics(GetSendStatisticsRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Returns the user's sending statistics.
- getSendStatistics() - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Returns the user's sending statistics.
- getSendStatistics(GetSendStatisticsRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Returns the user's sending statistics.
- getSendStatistics() - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Returns the user's sending statistics.
- getSendStatisticsAsync(GetSendStatisticsRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the user's sending statistics.
- getSendStatisticsAsync(GetSendStatisticsRequest, AsyncHandler<GetSendStatisticsRequest, GetSendStatisticsResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Returns the user's sending statistics.
- getSendStatisticsAsync(GetSendStatisticsRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the user's sending statistics.
- getSendStatisticsAsync(GetSendStatisticsRequest, AsyncHandler<GetSendStatisticsRequest, GetSendStatisticsResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Returns the user's sending statistics.
- GetSendStatisticsRequest - Class in com.amazonaws.services.simpleemail.model
-
Returns the user's sending statistics.
- GetSendStatisticsRequest() - Constructor for class com.amazonaws.services.simpleemail.model.GetSendStatisticsRequest
-
- GetSendStatisticsResult - Class in com.amazonaws.services.simpleemail.model
-
Represents a list of data points.
- GetSendStatisticsResult() - Constructor for class com.amazonaws.services.simpleemail.model.GetSendStatisticsResult
-
- getSentLast24Hours() - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The number of emails sent during the previous 24 hours.
- getSmtpReplyCode() - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The SMTP reply code, as defined by
RFC 5321.
- getSNSAction() - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Publishes the email content within a notification to Amazon SNS.
- getSnsTopic() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The Amazon Resource Name (ARN) of the Amazon SNS topic.
- getSource() - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The email address that is sending the email.
- getSource() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
The identity's email address.
- getSourceArn() - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
This parameter is used only for sending authorization.
- getSourceArn() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- getStatus() - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The status code that indicates what went wrong.
- getStatusCode() - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The SMTP enhanced status code, as defined by
RFC 3463.
- getStopAction() - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Terminates the evaluation of the receipt rule set and optionally
publishes a notification to Amazon SNS.
- getSubject() - Method in class com.amazonaws.services.simpleemail.model.Message
-
The subject of the message: A short summary of the content, which will
appear in the recipient's inbox.
- getText() - Method in class com.amazonaws.services.simpleemail.model.Body
-
The content of the message, in text format.
- getTimestamp() - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Time of the data point.
- getTlsPolicy() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
Specifies whether Amazon SES should require that incoming email is
delivered over a connection encrypted with Transport Layer Security
(TLS).
- getToAddresses() - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The To: field(s) of the message.
- getTopic() - Method in exception com.amazonaws.services.simpleemail.model.InvalidSnsTopicException
-
Returns the value of the topic property for this object.
- getTopicArn() - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
bounce action is taken.
- getTopicArn() - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
Lambda action is taken.
- getTopicArn() - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The ARN of the Amazon SNS topic to notify when the message is saved to
the Amazon S3 bucket.
- getTopicArn() - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify.
- getTopicArn() - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
stop action is taken.
- getTopicArn() - Method in class com.amazonaws.services.simpleemail.model.WorkmailAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
WorkMail action is called.
- getValue() - Method in class com.amazonaws.services.simpleemail.model.ExtensionField
-
The value of the header to add.
- getVerificationAttributes() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesResult
-
A map of Identities to IdentityVerificationAttributes objects.
- getVerificationStatus() - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
The verification status of the identity: "Pending", "Success", "Failed",
or "TemporaryFailure".
- getVerificationToken() - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
The verification token for a domain identity.
- getVerificationToken() - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainIdentityResult
-
A TXT record that must be placed in the DNS settings for the domain, in
order to complete domain verification.
- getVerifiedEmailAddresses() - Method in class com.amazonaws.services.simpleemail.model.ListVerifiedEmailAddressesResult
-
A list of email addresses that have been verified.
- getWorkmailAction() - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Calls Amazon WorkMail and, optionally, publishes a notification to Amazon
SNS.
- S3Action - Class in com.amazonaws.services.simpleemail.model
-
When included in a receipt rule, this action saves the received message to an
Amazon Simple Storage Service (Amazon S3) bucket and, optionally, publishes a
notification to Amazon Simple Notification Service (Amazon SNS).
- S3Action() - Constructor for class com.amazonaws.services.simpleemail.model.S3Action
-
- sendBounce(SendBounceRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Generates and sends a bounce message to the sender of an email you
received through Amazon SES.
- sendBounce(SendBounceRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Generates and sends a bounce message to the sender of an email you
received through Amazon SES.
- sendBounceAsync(SendBounceRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Generates and sends a bounce message to the sender of an email you
received through Amazon SES.
- sendBounceAsync(SendBounceRequest, AsyncHandler<SendBounceRequest, SendBounceResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Generates and sends a bounce message to the sender of an email you
received through Amazon SES.
- sendBounceAsync(SendBounceRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Generates and sends a bounce message to the sender of an email you
received through Amazon SES.
- sendBounceAsync(SendBounceRequest, AsyncHandler<SendBounceRequest, SendBounceResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Generates and sends a bounce message to the sender of an email you
received through Amazon SES.
- SendBounceRequest - Class in com.amazonaws.services.simpleemail.model
-
Generates and sends a bounce message to the sender of an email you received
through Amazon SES.
- SendBounceRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
- SendBounceResult - Class in com.amazonaws.services.simpleemail.model
-
Represents a unique message ID.
- SendBounceResult() - Constructor for class com.amazonaws.services.simpleemail.model.SendBounceResult
-
- SendDataPoint - Class in com.amazonaws.services.simpleemail.model
-
Represents sending statistics data.
- SendDataPoint() - Constructor for class com.amazonaws.services.simpleemail.model.SendDataPoint
-
- sendEmail(SendEmailRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Composes an email message based on input data, and then immediately
queues the message for sending.
- sendEmail(SendEmailRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Composes an email message based on input data, and then immediately
queues the message for sending.
- sendEmailAsync(SendEmailRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Composes an email message based on input data, and then immediately
queues the message for sending.
- sendEmailAsync(SendEmailRequest, AsyncHandler<SendEmailRequest, SendEmailResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Composes an email message based on input data, and then immediately
queues the message for sending.
- sendEmailAsync(SendEmailRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Composes an email message based on input data, and then immediately
queues the message for sending.
- sendEmailAsync(SendEmailRequest, AsyncHandler<SendEmailRequest, SendEmailResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Composes an email message based on input data, and then immediately
queues the message for sending.
- SendEmailRequest - Class in com.amazonaws.services.simpleemail.model
-
Composes an email message based on input data, and then immediately queues
the message for sending.
- SendEmailRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
Default constructor for SendEmailRequest object.
- SendEmailRequest(String, Destination, Message) - Constructor for class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
Constructs a new SendEmailRequest object.
- SendEmailResult - Class in com.amazonaws.services.simpleemail.model
-
Represents a unique message ID.
- SendEmailResult() - Constructor for class com.amazonaws.services.simpleemail.model.SendEmailResult
-
- sendRawEmail(SendRawEmailRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Sends an email message, with header and content specified by the client.
- sendRawEmail(SendRawEmailRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Sends an email message, with header and content specified by the client.
- sendRawEmailAsync(SendRawEmailRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Sends an email message, with header and content specified by the client.
- sendRawEmailAsync(SendRawEmailRequest, AsyncHandler<SendRawEmailRequest, SendRawEmailResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Sends an email message, with header and content specified by the client.
- sendRawEmailAsync(SendRawEmailRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Sends an email message, with header and content specified by the client.
- sendRawEmailAsync(SendRawEmailRequest, AsyncHandler<SendRawEmailRequest, SendRawEmailResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Sends an email message, with header and content specified by the client.
- SendRawEmailRequest - Class in com.amazonaws.services.simpleemail.model
-
Sends an email message, with header and content specified by the client.
- SendRawEmailRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
Default constructor for SendRawEmailRequest object.
- SendRawEmailRequest(RawMessage) - Constructor for class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
Constructs a new SendRawEmailRequest object.
- SendRawEmailResult - Class in com.amazonaws.services.simpleemail.model
-
Represents a unique message ID.
- SendRawEmailResult() - Constructor for class com.amazonaws.services.simpleemail.model.SendRawEmailResult
-
- setAction(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The action performed by the reporting mail transfer agent (MTA) as a
result of its attempt to deliver the message to the recipient address.
- setAction(DsnAction) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The action performed by the reporting mail transfer agent (MTA) as a
result of its attempt to deliver the message to the recipient address.
- setActions(Collection<ReceiptAction>) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
An ordered list of actions to perform on messages that match at least one
of the recipient email addresses or domains specified in the receipt
rule.
- setActiveReceiptRuleSet(SetActiveReceiptRuleSetRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Sets the specified receipt rule set as the active receipt rule set.
- setActiveReceiptRuleSet(SetActiveReceiptRuleSetRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Sets the specified receipt rule set as the active receipt rule set.
- setActiveReceiptRuleSetAsync(SetActiveReceiptRuleSetRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Sets the specified receipt rule set as the active receipt rule set.
- setActiveReceiptRuleSetAsync(SetActiveReceiptRuleSetRequest, AsyncHandler<SetActiveReceiptRuleSetRequest, SetActiveReceiptRuleSetResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Sets the specified receipt rule set as the active receipt rule set.
- setActiveReceiptRuleSetAsync(SetActiveReceiptRuleSetRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Sets the specified receipt rule set as the active receipt rule set.
- setActiveReceiptRuleSetAsync(SetActiveReceiptRuleSetRequest, AsyncHandler<SetActiveReceiptRuleSetRequest, SetActiveReceiptRuleSetResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Sets the specified receipt rule set as the active receipt rule set.
- SetActiveReceiptRuleSetRequest - Class in com.amazonaws.services.simpleemail.model
-
Sets the specified receipt rule set as the active receipt rule set.
- SetActiveReceiptRuleSetRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SetActiveReceiptRuleSetRequest
-
- SetActiveReceiptRuleSetResult - Class in com.amazonaws.services.simpleemail.model
-
An empty element returned on a successful request.
- SetActiveReceiptRuleSetResult() - Constructor for class com.amazonaws.services.simpleemail.model.SetActiveReceiptRuleSetResult
-
- setAddHeaderAction(AddHeaderAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Adds a header to the received email.
- setAfter(String) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
The name of an existing rule after which the new rule will be placed.
- setAfter(String) - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule after which to place the specified receipt
rule.
- setArrivalDate(Date) - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
When the message was received by the reporting mail transfer agent (MTA),
in
RFC 822 date-time
format.
- setBccAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The BCC: field(s) of the message.
- setBehaviorOnMXFailure(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The action that Amazon SES takes if it cannot successfully read the
required MX record when you send an email.
- setBehaviorOnMXFailure(BehaviorOnMXFailure) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The action that Amazon SES takes if it cannot successfully read the
required MX record when you send an email.
- setBehaviorOnMXFailure(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The action that you want Amazon SES to take if it cannot successfully
read the required MX record when you send an email.
- setBehaviorOnMXFailure(BehaviorOnMXFailure) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The action that you want Amazon SES to take if it cannot successfully
read the required MX record when you send an email.
- setBody(Body) - Method in class com.amazonaws.services.simpleemail.model.Message
-
The message body.
- setBounceAction(BounceAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Rejects the received email by returning a bounce response to the sender
and, optionally, publishes a notification to Amazon Simple Notification
Service (Amazon SNS).
- setBouncedRecipientInfoList(Collection<BouncedRecipientInfo>) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
A list of recipients of the bounced message, including the information
required to create the Delivery Status Notifications (DSNs) for the
recipients.
- setBounces(Long) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails that have bounced.
- setBounceSender(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
The address to use in the "From" header of the bounce message.
- setBounceSenderArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
This parameter is used only for sending authorization.
- setBounceTopic(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish bounce notifications.
- setBounceType(String) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
The reason for the bounce.
- setBounceType(BounceType) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
The reason for the bounce.
- setBucket(String) - Method in exception com.amazonaws.services.simpleemail.model.InvalidS3ConfigurationException
-
Sets the value of bucket
- setBucketName(String) - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The name of the Amazon S3 bucket to which to save the received email.
- setCcAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The CC: field(s) of the message.
- setCharset(String) - Method in class com.amazonaws.services.simpleemail.model.Content
-
The character set of the content.
- setCidr(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
A single IP address or a range of IP addresses that you want to block or
allow, specified in Classless Inter-Domain Routing (CIDR) notation.
- setComplaints(Long) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of unwanted emails that were rejected by recipients.
- setComplaintTopic(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish complaint notifications.
- setCreatedTimestamp(Date) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRuleSetMetadata
-
The date and time the receipt rule set was created.
- setData(String) - Method in class com.amazonaws.services.simpleemail.model.Content
-
The textual data of the content.
- setData(ByteBuffer) - Method in class com.amazonaws.services.simpleemail.model.RawMessage
-
The raw data of the message.
- setDeliveryAttempts(Long) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails that have been enqueued for sending.
- setDeliveryTopic(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish delivery notifications.
- setDestination(Destination) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The destination for this email, composed of To:, CC:, and BCC: fields.
- setDestinations(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
A list of destinations for the message, consisting of To:, CC:, and BCC:
addresses.
- setDiagnosticCode(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
An extended explanation of what went wrong; this is usually an SMTP
response.
- setDkimAttributes(Map<String, IdentityDkimAttributes>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesResult
-
The DKIM attributes for an email address or a domain.
- setDkimEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
True if DKIM signing is enabled for email sent from the identity; false
otherwise.
- setDkimEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledRequest
-
Sets whether DKIM signing is enabled for an identity.
- setDkimTokens(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
A set of character strings that represent the domain's identity.
- setDkimTokens(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimResult
-
A set of character strings that represent the domain's identity.
- setDkimVerificationStatus(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
Describes whether Amazon SES has successfully verified the DKIM DNS
records (tokens) published in the domain name's DNS.
- setDkimVerificationStatus(VerificationStatus) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
Describes whether Amazon SES has successfully verified the DKIM DNS
records (tokens) published in the domain name's DNS.
- setDomain(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimRequest
-
The name of the domain to be verified for Easy DKIM signing.
- setDomain(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainIdentityRequest
-
The domain to be verified.
- setEmailAddress(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteVerifiedEmailAddressRequest
-
An email address to be removed from the list of verified addresses.
- setEmailAddress(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailAddressRequest
-
The email address to be verified.
- setEmailAddress(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailIdentityRequest
-
The email address to be verified.
- setEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
If true, the receipt rule is active.
- setEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
Sets whether Amazon SES includes the original email headers in Amazon SNS
notifications of the specified notification type.
- setEncoding(String) - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
The encoding to use for the email within the Amazon SNS notification.
- setEncoding(SNSActionEncoding) - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
The encoding to use for the email within the Amazon SNS notification.
- setEndpoint(String) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Overrides the default endpoint for this client
("https://email.us-east-1.amazonaws.com").
- setExplanation(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
Human-readable text for the bounce message to explain the failure.
- setExtensionFields(Collection<ExtensionField>) - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
Additional X-headers to include in the DSN.
- setExtensionFields(Collection<ExtensionField>) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
Additional X-headers to include in the DSN.
- setFilter(ReceiptFilter) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptFilterRequest
-
A data structure that describes the IP address filter to create, which
consists of a name, an IP address range, and whether to allow or block
mail from it.
- setFilterName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptFilterRequest
-
The name of the IP address filter to delete.
- setFilters(Collection<ReceiptFilter>) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptFiltersResult
-
A list of IP address filter data structures, which each consist of a
name, an IP address range, and whether to allow or block mail from it.
- setFinalRecipient(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The email address to which the message was ultimately delivered.
- setForwardingEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES will forward bounce and complaint
notifications as email.
- setForwardingEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledRequest
-
Sets whether Amazon SES will forward bounce and complaint notifications
as email.
- setFromArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- setFunctionArn(String) - Method in exception com.amazonaws.services.simpleemail.model.InvalidLambdaFunctionException
-
Sets the value of functionArn
- setFunctionArn(String) - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The Amazon Resource Name (ARN) of the AWS Lambda function.
- setHeaderName(String) - Method in class com.amazonaws.services.simpleemail.model.AddHeaderAction
-
The name of the header to add.
- setHeadersInBounceNotificationsEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Bounce.
- setHeadersInComplaintNotificationsEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Complaint.
- setHeadersInDeliveryNotificationsEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Delivery.
- setHeaderValue(String) - Method in class com.amazonaws.services.simpleemail.model.AddHeaderAction
-
Must be less than 2048 characters, and must not contain newline
characters ("\r" or "\n").
- setHtml(Content) - Method in class com.amazonaws.services.simpleemail.model.Body
-
The content of the message, in HTML format.
- setIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesRequest
-
A list of one or more verified identities - email addresses, domains, or
both.
- setIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesRequest
-
A list of one or more identities.
- setIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesRequest
-
A list of one or more identities.
- setIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesRequest
-
A list of identities.
- setIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesResult
-
A list of identities.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityPolicyRequest
-
The identity that is associated with the policy that you want to delete.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityRequest
-
The identity to be removed from the list of identities for the AWS
Account.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
The identity for which the policies will be retrieved.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesRequest
-
The identity that is associated with the policy for which the policies
will be listed.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The identity to which the policy will apply.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledRequest
-
The identity for which DKIM signing should be enabled or disabled.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledRequest
-
The identity for which to set bounce and complaint notification
forwarding.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
The identity for which to enable or disable headers in notifications.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The verified identity for which you want to enable or disable the
specified custom MAIL FROM domain.
- setIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The identity for which the Amazon SNS topic will be set.
- setIdentityDkimEnabled(SetIdentityDkimEnabledRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Enables or disables Easy DKIM signing of email sent from an identity:
- setIdentityDkimEnabled(SetIdentityDkimEnabledRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Enables or disables Easy DKIM signing of email sent from an identity:
- setIdentityDkimEnabledAsync(SetIdentityDkimEnabledRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Enables or disables Easy DKIM signing of email sent from an identity:
- setIdentityDkimEnabledAsync(SetIdentityDkimEnabledRequest, AsyncHandler<SetIdentityDkimEnabledRequest, SetIdentityDkimEnabledResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Enables or disables Easy DKIM signing of email sent from an identity:
- setIdentityDkimEnabledAsync(SetIdentityDkimEnabledRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Enables or disables Easy DKIM signing of email sent from an identity:
- setIdentityDkimEnabledAsync(SetIdentityDkimEnabledRequest, AsyncHandler<SetIdentityDkimEnabledRequest, SetIdentityDkimEnabledResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Enables or disables Easy DKIM signing of email sent from an identity:
- SetIdentityDkimEnabledRequest - Class in com.amazonaws.services.simpleemail.model
-
Enables or disables Easy DKIM signing of email sent from an identity:
- SetIdentityDkimEnabledRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledRequest
-
- SetIdentityDkimEnabledResult - Class in com.amazonaws.services.simpleemail.model
-
An empty element returned on a successful request.
- SetIdentityDkimEnabledResult() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledResult
-
- setIdentityFeedbackForwardingEnabled(SetIdentityFeedbackForwardingEnabledRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Given an identity (an email address or a domain), enables or disables
whether Amazon SES forwards bounce and complaint notifications as email.
- setIdentityFeedbackForwardingEnabled(SetIdentityFeedbackForwardingEnabledRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Given an identity (an email address or a domain), enables or disables
whether Amazon SES forwards bounce and complaint notifications as email.
- setIdentityFeedbackForwardingEnabledAsync(SetIdentityFeedbackForwardingEnabledRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given an identity (an email address or a domain), enables or disables
whether Amazon SES forwards bounce and complaint notifications as email.
- setIdentityFeedbackForwardingEnabledAsync(SetIdentityFeedbackForwardingEnabledRequest, AsyncHandler<SetIdentityFeedbackForwardingEnabledRequest, SetIdentityFeedbackForwardingEnabledResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given an identity (an email address or a domain), enables or disables
whether Amazon SES forwards bounce and complaint notifications as email.
- setIdentityFeedbackForwardingEnabledAsync(SetIdentityFeedbackForwardingEnabledRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given an identity (an email address or a domain), enables or disables
whether Amazon SES forwards bounce and complaint notifications as email.
- setIdentityFeedbackForwardingEnabledAsync(SetIdentityFeedbackForwardingEnabledRequest, AsyncHandler<SetIdentityFeedbackForwardingEnabledRequest, SetIdentityFeedbackForwardingEnabledResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given an identity (an email address or a domain), enables or disables
whether Amazon SES forwards bounce and complaint notifications as email.
- SetIdentityFeedbackForwardingEnabledRequest - Class in com.amazonaws.services.simpleemail.model
-
Given an identity (an email address or a domain), enables or disables whether
Amazon SES forwards bounce and complaint notifications as email.
- SetIdentityFeedbackForwardingEnabledRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledRequest
-
- SetIdentityFeedbackForwardingEnabledResult - Class in com.amazonaws.services.simpleemail.model
-
An empty element returned on a successful request.
- SetIdentityFeedbackForwardingEnabledResult() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledResult
-
- setIdentityHeadersInNotificationsEnabled(SetIdentityHeadersInNotificationsEnabledRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Given an identity (an email address or a domain), sets whether Amazon SES
includes the original email headers in the Amazon Simple Notification
Service (Amazon SNS) notifications of a specified type.
- setIdentityHeadersInNotificationsEnabled(SetIdentityHeadersInNotificationsEnabledRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Given an identity (an email address or a domain), sets whether Amazon SES
includes the original email headers in the Amazon Simple Notification
Service (Amazon SNS) notifications of a specified type.
- setIdentityHeadersInNotificationsEnabledAsync(SetIdentityHeadersInNotificationsEnabledRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given an identity (an email address or a domain), sets whether Amazon SES
includes the original email headers in the Amazon Simple Notification
Service (Amazon SNS) notifications of a specified type.
- setIdentityHeadersInNotificationsEnabledAsync(SetIdentityHeadersInNotificationsEnabledRequest, AsyncHandler<SetIdentityHeadersInNotificationsEnabledRequest, SetIdentityHeadersInNotificationsEnabledResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given an identity (an email address or a domain), sets whether Amazon SES
includes the original email headers in the Amazon Simple Notification
Service (Amazon SNS) notifications of a specified type.
- setIdentityHeadersInNotificationsEnabledAsync(SetIdentityHeadersInNotificationsEnabledRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given an identity (an email address or a domain), sets whether Amazon SES
includes the original email headers in the Amazon Simple Notification
Service (Amazon SNS) notifications of a specified type.
- setIdentityHeadersInNotificationsEnabledAsync(SetIdentityHeadersInNotificationsEnabledRequest, AsyncHandler<SetIdentityHeadersInNotificationsEnabledRequest, SetIdentityHeadersInNotificationsEnabledResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given an identity (an email address or a domain), sets whether Amazon SES
includes the original email headers in the Amazon Simple Notification
Service (Amazon SNS) notifications of a specified type.
- SetIdentityHeadersInNotificationsEnabledRequest - Class in com.amazonaws.services.simpleemail.model
-
Given an identity (an email address or a domain), sets whether Amazon SES
includes the original email headers in the Amazon Simple Notification Service
(Amazon SNS) notifications of a specified type.
- SetIdentityHeadersInNotificationsEnabledRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
- SetIdentityHeadersInNotificationsEnabledResult - Class in com.amazonaws.services.simpleemail.model
-
An empty element returned on a successful request.
- SetIdentityHeadersInNotificationsEnabledResult() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledResult
-
- setIdentityMailFromDomain(SetIdentityMailFromDomainRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Enables or disables the custom MAIL FROM domain setup for a verified
identity (an email address or a domain).
- setIdentityMailFromDomain(SetIdentityMailFromDomainRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Enables or disables the custom MAIL FROM domain setup for a verified
identity (an email address or a domain).
- setIdentityMailFromDomainAsync(SetIdentityMailFromDomainRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Enables or disables the custom MAIL FROM domain setup for a verified
identity (an email address or a domain).
- setIdentityMailFromDomainAsync(SetIdentityMailFromDomainRequest, AsyncHandler<SetIdentityMailFromDomainRequest, SetIdentityMailFromDomainResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Enables or disables the custom MAIL FROM domain setup for a verified
identity (an email address or a domain).
- setIdentityMailFromDomainAsync(SetIdentityMailFromDomainRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Enables or disables the custom MAIL FROM domain setup for a verified
identity (an email address or a domain).
- setIdentityMailFromDomainAsync(SetIdentityMailFromDomainRequest, AsyncHandler<SetIdentityMailFromDomainRequest, SetIdentityMailFromDomainResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Enables or disables the custom MAIL FROM domain setup for a verified
identity (an email address or a domain).
- SetIdentityMailFromDomainRequest - Class in com.amazonaws.services.simpleemail.model
-
Enables or disables the custom MAIL FROM domain setup for a verified identity
(an email address or a domain).
- SetIdentityMailFromDomainRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
- SetIdentityMailFromDomainResult - Class in com.amazonaws.services.simpleemail.model
-
An empty element returned on a successful request.
- SetIdentityMailFromDomainResult() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainResult
-
- setIdentityNotificationTopic(SetIdentityNotificationTopicRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Given an identity (an email address or a domain), sets the Amazon Simple
Notification Service (Amazon SNS) topic to which Amazon SES will publish
bounce, complaint, and/or delivery notifications for emails sent with
that identity as the Source.
- setIdentityNotificationTopic(SetIdentityNotificationTopicRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Given an identity (an email address or a domain), sets the Amazon Simple
Notification Service (Amazon SNS) topic to which Amazon SES will publish
bounce, complaint, and/or delivery notifications for emails sent with
that identity as the Source.
- setIdentityNotificationTopicAsync(SetIdentityNotificationTopicRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given an identity (an email address or a domain), sets the Amazon Simple
Notification Service (Amazon SNS) topic to which Amazon SES will publish
bounce, complaint, and/or delivery notifications for emails sent with
that identity as the Source.
- setIdentityNotificationTopicAsync(SetIdentityNotificationTopicRequest, AsyncHandler<SetIdentityNotificationTopicRequest, SetIdentityNotificationTopicResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Given an identity (an email address or a domain), sets the Amazon Simple
Notification Service (Amazon SNS) topic to which Amazon SES will publish
bounce, complaint, and/or delivery notifications for emails sent with
that identity as the Source.
- setIdentityNotificationTopicAsync(SetIdentityNotificationTopicRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given an identity (an email address or a domain), sets the Amazon Simple
Notification Service (Amazon SNS) topic to which Amazon SES will publish
bounce, complaint, and/or delivery notifications for emails sent with
that identity as the Source.
- setIdentityNotificationTopicAsync(SetIdentityNotificationTopicRequest, AsyncHandler<SetIdentityNotificationTopicRequest, SetIdentityNotificationTopicResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Given an identity (an email address or a domain), sets the Amazon Simple
Notification Service (Amazon SNS) topic to which Amazon SES will publish
bounce, complaint, and/or delivery notifications for emails sent with
that identity as the Source.
- SetIdentityNotificationTopicRequest - Class in com.amazonaws.services.simpleemail.model
-
Given an identity (an email address or a domain), sets the Amazon Simple
Notification Service (Amazon SNS) topic to which Amazon SES will publish
bounce, complaint, and/or delivery notifications for emails sent with that
identity as the Source.
- SetIdentityNotificationTopicRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
- SetIdentityNotificationTopicResult - Class in com.amazonaws.services.simpleemail.model
-
An empty element returned on a successful request.
- SetIdentityNotificationTopicResult() - Constructor for class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicResult
-
- setIdentityType(String) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The type of the identities to list.
- setIdentityType(IdentityType) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The type of the identities to list.
- setInvocationType(String) - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The invocation type of the AWS Lambda function.
- setInvocationType(InvocationType) - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The invocation type of the AWS Lambda function.
- setIpFilter(ReceiptIpFilter) - Method in class com.amazonaws.services.simpleemail.model.ReceiptFilter
-
A structure that provides the IP addresses to block or allow, and whether
to block or allow incoming mail from them.
- setKmsKeyArn(String) - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The customer master key that Amazon SES should use to encrypt your emails
before saving them to the Amazon S3 bucket.
- setLambdaAction(LambdaAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Calls an AWS Lambda function, and optionally, publishes a notification to
Amazon SNS.
- setLastAttemptDate(Date) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The time the final delivery attempt was made, in
RFC 822 date-time format.
- setMailFromDomain(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The custom MAIL FROM domain that the identity is configured to use.
- setMailFromDomain(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The custom MAIL FROM domain that you want the verified identity to use.
- setMailFromDomainAttributes(Map<String, IdentityMailFromDomainAttributes>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesResult
-
A map of identities to custom MAIL FROM attributes.
- setMailFromDomainStatus(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The state that indicates whether Amazon SES has successfully read the MX
record required for custom MAIL FROM domain setup.
- setMailFromDomainStatus(CustomMailFromStatus) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The state that indicates whether Amazon SES has successfully read the MX
record required for custom MAIL FROM domain setup.
- setMax24HourSend(Double) - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The maximum number of emails the user is allowed to send in a 24-hour
interval.
- setMaxItems(Integer) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The maximum number of identities per page.
- setMaxSendRate(Double) - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The maximum number of emails that Amazon SES can accept from the user's
account per second.
- setMessage(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
Human-readable text to include in the bounce message.
- setMessage(Message) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The message to be sent.
- setMessageDsn(MessageDsn) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
Message-related DSN fields.
- setMessageId(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceResult
-
The message ID of the bounce message.
- setMessageId(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailResult
-
The unique message identifier returned from the SendEmail
action.
- setMessageId(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailResult
-
The unique message identifier returned from the SendRawEmail
action.
- setMetadata(ReceiptRuleSetMetadata) - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetResult
-
The metadata for the currently active receipt rule set.
- setMetadata(ReceiptRuleSetMetadata) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetResult
-
The metadata for the receipt rule set, which consists of the rule set
name and the timestamp of when the rule set was created.
- setName(String) - Method in exception com.amazonaws.services.simpleemail.model.AlreadyExistsException
-
Sets the value of name
- setName(String) - Method in exception com.amazonaws.services.simpleemail.model.CannotDeleteException
-
Sets the value of name
- setName(String) - Method in class com.amazonaws.services.simpleemail.model.ExtensionField
-
The name of the header to add.
- setName(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptFilter
-
The name of the IP address filter.
- setName(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
The name of the receipt rule.
- setName(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRuleSetMetadata
-
The name of the receipt rule set.
- setName(String) - Method in exception com.amazonaws.services.simpleemail.model.RuleDoesNotExistException
-
Sets the value of name
- setName(String) - Method in exception com.amazonaws.services.simpleemail.model.RuleSetDoesNotExistException
-
Sets the value of name
- setNextToken(String) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The token to use for pagination.
- setNextToken(String) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesResult
-
The token used for pagination.
- setNextToken(String) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsRequest
-
A token returned from a previous call to ListReceiptRuleSets
to indicate the position in the receipt rule set list.
- setNextToken(String) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsResult
-
A token indicating that there are additional receipt rule sets available
to be listed.
- setNotificationAttributes(Map<String, IdentityNotificationAttributes>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesResult
-
A map of Identity to IdentityNotificationAttributes.
- setNotificationType(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
The notification type for which to enable or disable headers in
notifications.
- setNotificationType(NotificationType) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
The notification type for which to enable or disable headers in
notifications.
- setNotificationType(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The type of notifications that will be published to the specified Amazon
SNS topic.
- setNotificationType(NotificationType) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The type of notifications that will be published to the specified Amazon
SNS topic.
- setObjectKeyPrefix(String) - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The key prefix of the Amazon S3 bucket.
- setOrganizationArn(String) - Method in class com.amazonaws.services.simpleemail.model.WorkmailAction
-
The ARN of the Amazon WorkMail organization.
- setOriginalMessageId(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
The message ID of the message to be bounced.
- setOriginalRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.CloneReceiptRuleSetRequest
-
The name of the rule set to clone.
- setPolicies(Map<String, String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesResult
-
A map of policy names to policies.
- setPolicy(String) - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The text of the policy in JSON format.
- setPolicy(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
Indicates whether to block or allow incoming mail from the specified IP
addresses.
- setPolicy(ReceiptFilterPolicy) - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
Indicates whether to block or allow incoming mail from the specified IP
addresses.
- setPolicyName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityPolicyRequest
-
The name of the policy to be deleted.
- setPolicyName(String) - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The name of the policy.
- setPolicyNames(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
A list of the names of policies to be retrieved.
- setPolicyNames(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesResult
-
A list of names of policies that apply to the specified identity.
- setRawMessage(RawMessage) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
The raw text of the message.
- setReceiptRulePosition(SetReceiptRulePositionRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Sets the position of the specified receipt rule in the receipt rule set.
- setReceiptRulePosition(SetReceiptRulePositionRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceClient
-
Sets the position of the specified receipt rule in the receipt rule set.
- setReceiptRulePositionAsync(SetReceiptRulePositionRequest) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Sets the position of the specified receipt rule in the receipt rule set.
- setReceiptRulePositionAsync(SetReceiptRulePositionRequest, AsyncHandler<SetReceiptRulePositionRequest, SetReceiptRulePositionResult>) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsync
-
Sets the position of the specified receipt rule in the receipt rule set.
- setReceiptRulePositionAsync(SetReceiptRulePositionRequest) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Sets the position of the specified receipt rule in the receipt rule set.
- setReceiptRulePositionAsync(SetReceiptRulePositionRequest, AsyncHandler<SetReceiptRulePositionRequest, SetReceiptRulePositionResult>) - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Sets the position of the specified receipt rule in the receipt rule set.
- SetReceiptRulePositionRequest - Class in com.amazonaws.services.simpleemail.model
-
Sets the position of the specified receipt rule in the receipt rule set.
- SetReceiptRulePositionRequest() - Constructor for class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
- SetReceiptRulePositionResult - Class in com.amazonaws.services.simpleemail.model
-
An empty element returned on a successful request.
- SetReceiptRulePositionResult() - Constructor for class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionResult
-
- setRecipient(String) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
The email address of the recipient of the bounced email.
- setRecipientArn(String) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
This parameter is used only for sending authorization.
- setRecipientDsnFields(RecipientDsnFields) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
Recipient-related DSN fields, most of which would normally be filled in
automatically when provided with a BounceType.
- setRecipients(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
The recipient domains and email addresses to which the receipt rule
applies.
- setRegion(Region) - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
- setRejects(Long) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails rejected by Amazon SES.
- setRemoteMta(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The MTA to which the remote MTA attempted to deliver the message,
formatted as specified in
RFC 3464 (
mta-name-type; mta-name).
- setReplyToAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The reply-to email address(es) for the message.
- setReportingMta(String) - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
The reporting MTA that attempted to deliver the message, formatted as
specified in
RFC 3464 (
mta-name-type; mta-name).
- setReturnPath(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The email address to which bounces and complaints are to be forwarded
when feedback forwarding is enabled.
- setReturnPathArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
This parameter is used only for sending authorization.
- setReturnPathArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- setRule(ReceiptRule) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
A data structure that contains the specified rule's name, actions,
recipients, domains, enabled status, scan status, and TLS policy.
- setRule(ReceiptRule) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleResult
-
A data structure that contains the specified receipt rule's name,
actions, recipients, domains, enabled status, scan status, and Transport
Layer Security (TLS) policy.
- setRule(ReceiptRule) - Method in class com.amazonaws.services.simpleemail.model.UpdateReceiptRuleRequest
-
A data structure that contains the updated receipt rule information.
- setRuleName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleRequest
-
The name of the receipt rule to delete.
- setRuleName(String) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleRequest
-
The name of the receipt rule.
- setRuleName(String) - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule to reposition.
- setRuleNames(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetRequest
-
A list of the specified receipt rule set's receipt rules in the order
that you want to put them.
- setRules(Collection<ReceiptRule>) - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetResult
-
The receipt rules that belong to the active rule set.
- setRules(Collection<ReceiptRule>) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetResult
-
A list of the receipt rules that belong to the specified receipt rule
set.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.CloneReceiptRuleSetRequest
-
The name of the rule set to create.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
The name of the rule set to which to add the rule.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleSetRequest
-
The name of the rule set to create.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleRequest
-
The name of the receipt rule set that contains the receipt rule to
delete.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleSetRequest
-
The name of the receipt rule set to delete.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleRequest
-
The name of the receipt rule set to which the receipt rule belongs.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetRequest
-
The name of the receipt rule set to describe.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetRequest
-
The name of the receipt rule set to reorder.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.SetActiveReceiptRuleSetRequest
-
The name of the receipt rule set to make active.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule set that contains the receipt rule to
reposition.
- setRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.UpdateReceiptRuleRequest
-
The name of the receipt rule set to which the receipt rule belongs.
- setRuleSets(Collection<ReceiptRuleSetMetadata>) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsResult
-
The metadata for the currently active receipt rule set.
- setS3Action(S3Action) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Saves the received message to an Amazon Simple Storage Service (Amazon
S3) bucket and, optionally, publishes a notification to Amazon SNS.
- setScanEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
If true, then messages to which this receipt rule applies
are scanned for spam and viruses.
- setScope(String) - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
The scope to which the Stop action applies.
- setScope(StopScope) - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
The scope to which the Stop action applies.
- setSendDataPoints(Collection<SendDataPoint>) - Method in class com.amazonaws.services.simpleemail.model.GetSendStatisticsResult
-
A list of data points, each of which represents 15 minutes of activity.
- setSender(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The email address of the sender of the bounced email.
- setSentLast24Hours(Double) - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The number of emails sent during the previous 24 hours.
- setSmtpReplyCode(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The SMTP reply code, as defined by
RFC 5321.
- setSNSAction(SNSAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Publishes the email content within a notification to Amazon SNS.
- setSnsTopic(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The Amazon Resource Name (ARN) of the Amazon SNS topic.
- setSource(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The email address that is sending the email.
- setSource(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
The identity's email address.
- setSourceArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
This parameter is used only for sending authorization.
- setSourceArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- setStatus(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The status code that indicates what went wrong.
- setStatusCode(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The SMTP enhanced status code, as defined by
RFC 3463.
- setStopAction(StopAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Terminates the evaluation of the receipt rule set and optionally
publishes a notification to Amazon SNS.
- setSubject(Content) - Method in class com.amazonaws.services.simpleemail.model.Message
-
The subject of the message: A short summary of the content, which will
appear in the recipient's inbox.
- setText(Content) - Method in class com.amazonaws.services.simpleemail.model.Body
-
The content of the message, in text format.
- setTimestamp(Date) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Time of the data point.
- setTlsPolicy(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
Specifies whether Amazon SES should require that incoming email is
delivered over a connection encrypted with Transport Layer Security
(TLS).
- setTlsPolicy(TlsPolicy) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
Specifies whether Amazon SES should require that incoming email is
delivered over a connection encrypted with Transport Layer Security
(TLS).
- setToAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The To: field(s) of the message.
- setTopic(String) - Method in exception com.amazonaws.services.simpleemail.model.InvalidSnsTopicException
-
Sets the value of topic
- setTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
bounce action is taken.
- setTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
Lambda action is taken.
- setTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The ARN of the Amazon SNS topic to notify when the message is saved to
the Amazon S3 bucket.
- setTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify.
- setTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
stop action is taken.
- setTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.WorkmailAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
WorkMail action is called.
- setValue(String) - Method in class com.amazonaws.services.simpleemail.model.ExtensionField
-
The value of the header to add.
- setVerificationAttributes(Map<String, IdentityVerificationAttributes>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesResult
-
A map of Identities to IdentityVerificationAttributes objects.
- setVerificationStatus(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
The verification status of the identity: "Pending", "Success", "Failed",
or "TemporaryFailure".
- setVerificationStatus(VerificationStatus) - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
The verification status of the identity: "Pending", "Success", "Failed",
or "TemporaryFailure".
- setVerificationToken(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
The verification token for a domain identity.
- setVerificationToken(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainIdentityResult
-
A TXT record that must be placed in the DNS settings for the domain, in
order to complete domain verification.
- setVerifiedEmailAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ListVerifiedEmailAddressesResult
-
A list of email addresses that have been verified.
- setWorkmailAction(WorkmailAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Calls Amazon WorkMail and, optionally, publishes a notification to Amazon
SNS.
- shutdown() - Method in interface com.amazonaws.services.simpleemail.AmazonSimpleEmailService
-
Shuts down this client object, releasing any resources that might be held
open.
- shutdown() - Method in class com.amazonaws.services.simpleemail.AmazonSimpleEmailServiceAsyncClient
-
Shuts down the client, releasing all managed resources.
- SimpleEmailServiceActions - Enum in com.amazonaws.auth.policy.actions
-
The available AWS access control policy actions for Amazon Simple Email
Service.
- SNSAction - Class in com.amazonaws.services.simpleemail.model
-
When included in a receipt rule, this action publishes a notification to
Amazon Simple Notification Service (Amazon SNS).
- SNSAction() - Constructor for class com.amazonaws.services.simpleemail.model.SNSAction
-
- SNSActionEncoding - Enum in com.amazonaws.services.simpleemail.model
-
SNSAction Encoding
- StopAction - Class in com.amazonaws.services.simpleemail.model
-
When included in a receipt rule, this action terminates the evaluation of the
receipt rule set and, optionally, publishes a notification to Amazon Simple
Notification Service (Amazon SNS).
- StopAction() - Constructor for class com.amazonaws.services.simpleemail.model.StopAction
-
- StopScope - Enum in com.amazonaws.services.simpleemail.model
-
Stop Scope
- TlsPolicy - Enum in com.amazonaws.services.simpleemail.model
-
Tls Policy
- toString() - Method in class com.amazonaws.services.simpleemail.model.AddHeaderAction
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.BehaviorOnMXFailure
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.Body
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.BounceType
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.CloneReceiptRuleSetRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.CloneReceiptRuleSetResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.Content
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptFilterRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptFilterResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleSetRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleSetResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.CustomMailFromStatus
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityPolicyRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityPolicyResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptFilterRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptFilterResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleSetRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleSetResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DeleteVerifiedEmailAddressRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.Destination
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.DsnAction
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.ExtensionField
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetSendStatisticsRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.GetSendStatisticsResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.IdentityType
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.InvocationType
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListReceiptFiltersRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListReceiptFiltersResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListVerifiedEmailAddressesRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ListVerifiedEmailAddressesResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.Message
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.NotificationType
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.RawMessage
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ReceiptFilter
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.ReceiptFilterPolicy
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ReceiptRuleSetMetadata
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SendBounceResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SendEmailResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetActiveReceiptRuleSetRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetActiveReceiptRuleSetResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.SNSActionEncoding
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.StopScope
-
- toString() - Method in enum com.amazonaws.services.simpleemail.model.TlsPolicy
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.UpdateReceiptRuleRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.UpdateReceiptRuleResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in enum com.amazonaws.services.simpleemail.model.VerificationStatus
-
- toString() - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainIdentityRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainIdentityResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailAddressRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailIdentityRequest
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailIdentityResult
-
Returns a string representation of this object; useful for testing and
debugging.
- toString() - Method in class com.amazonaws.services.simpleemail.model.WorkmailAction
-
Returns a string representation of this object; useful for testing and
debugging.
- withAction(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The action performed by the reporting mail transfer agent (MTA) as a
result of its attempt to deliver the message to the recipient address.
- withAction(DsnAction) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The action performed by the reporting mail transfer agent (MTA) as a
result of its attempt to deliver the message to the recipient address.
- withActions(ReceiptAction...) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
An ordered list of actions to perform on messages that match at least one
of the recipient email addresses or domains specified in the receipt
rule.
- withActions(Collection<ReceiptAction>) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
An ordered list of actions to perform on messages that match at least one
of the recipient email addresses or domains specified in the receipt
rule.
- withAddHeaderAction(AddHeaderAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Adds a header to the received email.
- withAfter(String) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
The name of an existing rule after which the new rule will be placed.
- withAfter(String) - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule after which to place the specified receipt
rule.
- withArrivalDate(Date) - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
When the message was received by the reporting mail transfer agent (MTA),
in
RFC 822 date-time
format.
- withBccAddresses(String...) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The BCC: field(s) of the message.
- withBccAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The BCC: field(s) of the message.
- withBehaviorOnMXFailure(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The action that Amazon SES takes if it cannot successfully read the
required MX record when you send an email.
- withBehaviorOnMXFailure(BehaviorOnMXFailure) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The action that Amazon SES takes if it cannot successfully read the
required MX record when you send an email.
- withBehaviorOnMXFailure(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The action that you want Amazon SES to take if it cannot successfully
read the required MX record when you send an email.
- withBehaviorOnMXFailure(BehaviorOnMXFailure) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The action that you want Amazon SES to take if it cannot successfully
read the required MX record when you send an email.
- withBody(Body) - Method in class com.amazonaws.services.simpleemail.model.Message
-
The message body.
- withBounceAction(BounceAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Rejects the received email by returning a bounce response to the sender
and, optionally, publishes a notification to Amazon Simple Notification
Service (Amazon SNS).
- withBouncedRecipientInfoList(BouncedRecipientInfo...) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
A list of recipients of the bounced message, including the information
required to create the Delivery Status Notifications (DSNs) for the
recipients.
- withBouncedRecipientInfoList(Collection<BouncedRecipientInfo>) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
A list of recipients of the bounced message, including the information
required to create the Delivery Status Notifications (DSNs) for the
recipients.
- withBounces(Long) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails that have bounced.
- withBounceSender(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
The address to use in the "From" header of the bounce message.
- withBounceSenderArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
This parameter is used only for sending authorization.
- withBounceTopic(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish bounce notifications.
- withBounceType(String) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
The reason for the bounce.
- withBounceType(BounceType) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
The reason for the bounce.
- withBucketName(String) - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The name of the Amazon S3 bucket to which to save the received email.
- withCcAddresses(String...) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The CC: field(s) of the message.
- withCcAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The CC: field(s) of the message.
- withCharset(String) - Method in class com.amazonaws.services.simpleemail.model.Content
-
The character set of the content.
- withCidr(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
A single IP address or a range of IP addresses that you want to block or
allow, specified in Classless Inter-Domain Routing (CIDR) notation.
- withComplaints(Long) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of unwanted emails that were rejected by recipients.
- withComplaintTopic(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish complaint notifications.
- withCreatedTimestamp(Date) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRuleSetMetadata
-
The date and time the receipt rule set was created.
- withData(String) - Method in class com.amazonaws.services.simpleemail.model.Content
-
The textual data of the content.
- withData(ByteBuffer) - Method in class com.amazonaws.services.simpleemail.model.RawMessage
-
The raw data of the message.
- withDeliveryAttempts(Long) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails that have been enqueued for sending.
- withDeliveryTopic(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES
will publish delivery notifications.
- withDestination(Destination) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The destination for this email, composed of To:, CC:, and BCC: fields.
- withDestinations(String...) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
A list of destinations for the message, consisting of To:, CC:, and BCC:
addresses.
- withDestinations(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
A list of destinations for the message, consisting of To:, CC:, and BCC:
addresses.
- withDiagnosticCode(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
An extended explanation of what went wrong; this is usually an SMTP
response.
- withDkimAttributes(Map<String, IdentityDkimAttributes>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesResult
-
The DKIM attributes for an email address or a domain.
- withDkimEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
True if DKIM signing is enabled for email sent from the identity; false
otherwise.
- withDkimEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledRequest
-
Sets whether DKIM signing is enabled for an identity.
- withDkimTokens(String...) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
A set of character strings that represent the domain's identity.
- withDkimTokens(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
A set of character strings that represent the domain's identity.
- withDkimTokens(String...) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimResult
-
A set of character strings that represent the domain's identity.
- withDkimTokens(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimResult
-
A set of character strings that represent the domain's identity.
- withDkimVerificationStatus(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
Describes whether Amazon SES has successfully verified the DKIM DNS
records (tokens) published in the domain name's DNS.
- withDkimVerificationStatus(VerificationStatus) - Method in class com.amazonaws.services.simpleemail.model.IdentityDkimAttributes
-
Describes whether Amazon SES has successfully verified the DKIM DNS
records (tokens) published in the domain name's DNS.
- withDomain(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainDkimRequest
-
The name of the domain to be verified for Easy DKIM signing.
- withDomain(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainIdentityRequest
-
The domain to be verified.
- withEmailAddress(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteVerifiedEmailAddressRequest
-
An email address to be removed from the list of verified addresses.
- withEmailAddress(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailAddressRequest
-
The email address to be verified.
- withEmailAddress(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyEmailIdentityRequest
-
The email address to be verified.
- withEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
If true, the receipt rule is active.
- withEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
Sets whether Amazon SES includes the original email headers in Amazon SNS
notifications of the specified notification type.
- withEncoding(String) - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
The encoding to use for the email within the Amazon SNS notification.
- withEncoding(SNSActionEncoding) - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
The encoding to use for the email within the Amazon SNS notification.
- withExplanation(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
Human-readable text for the bounce message to explain the failure.
- withExtensionFields(ExtensionField...) - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
Additional X-headers to include in the DSN.
- withExtensionFields(Collection<ExtensionField>) - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
Additional X-headers to include in the DSN.
- withExtensionFields(ExtensionField...) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
Additional X-headers to include in the DSN.
- withExtensionFields(Collection<ExtensionField>) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
Additional X-headers to include in the DSN.
- withFilter(ReceiptFilter) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptFilterRequest
-
A data structure that describes the IP address filter to create, which
consists of a name, an IP address range, and whether to allow or block
mail from it.
- withFilterName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptFilterRequest
-
The name of the IP address filter to delete.
- withFilters(ReceiptFilter...) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptFiltersResult
-
A list of IP address filter data structures, which each consist of a
name, an IP address range, and whether to allow or block mail from it.
- withFilters(Collection<ReceiptFilter>) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptFiltersResult
-
A list of IP address filter data structures, which each consist of a
name, an IP address range, and whether to allow or block mail from it.
- withFinalRecipient(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The email address to which the message was ultimately delivered.
- withForwardingEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES will forward bounce and complaint
notifications as email.
- withForwardingEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledRequest
-
Sets whether Amazon SES will forward bounce and complaint notifications
as email.
- withFromArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- withFunctionArn(String) - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The Amazon Resource Name (ARN) of the AWS Lambda function.
- withHeaderName(String) - Method in class com.amazonaws.services.simpleemail.model.AddHeaderAction
-
The name of the header to add.
- withHeadersInBounceNotificationsEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Bounce.
- withHeadersInComplaintNotificationsEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Complaint.
- withHeadersInDeliveryNotificationsEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.IdentityNotificationAttributes
-
Describes whether Amazon SES includes the original email headers in
Amazon SNS notifications of type Delivery.
- withHeaderValue(String) - Method in class com.amazonaws.services.simpleemail.model.AddHeaderAction
-
Must be less than 2048 characters, and must not contain newline
characters ("\r" or "\n").
- withHtml(Content) - Method in class com.amazonaws.services.simpleemail.model.Body
-
The content of the message, in HTML format.
- withIdentities(String...) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesRequest
-
A list of one or more verified identities - email addresses, domains, or
both.
- withIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityDkimAttributesRequest
-
A list of one or more verified identities - email addresses, domains, or
both.
- withIdentities(String...) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesRequest
-
A list of one or more identities.
- withIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesRequest
-
A list of one or more identities.
- withIdentities(String...) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesRequest
-
A list of one or more identities.
- withIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesRequest
-
A list of one or more identities.
- withIdentities(String...) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesRequest
-
A list of identities.
- withIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesRequest
-
A list of identities.
- withIdentities(String...) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesResult
-
A list of identities.
- withIdentities(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesResult
-
A list of identities.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityPolicyRequest
-
The identity that is associated with the policy that you want to delete.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityRequest
-
The identity to be removed from the list of identities for the AWS
Account.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
The identity for which the policies will be retrieved.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesRequest
-
The identity that is associated with the policy for which the policies
will be listed.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The identity to which the policy will apply.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityDkimEnabledRequest
-
The identity for which DKIM signing should be enabled or disabled.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityFeedbackForwardingEnabledRequest
-
The identity for which to set bounce and complaint notification
forwarding.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
The identity for which to enable or disable headers in notifications.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The verified identity for which you want to enable or disable the
specified custom MAIL FROM domain.
- withIdentity(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The identity for which the Amazon SNS topic will be set.
- withIdentityType(String) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The type of the identities to list.
- withIdentityType(IdentityType) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The type of the identities to list.
- withInvocationType(String) - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The invocation type of the AWS Lambda function.
- withInvocationType(InvocationType) - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The invocation type of the AWS Lambda function.
- withIpFilter(ReceiptIpFilter) - Method in class com.amazonaws.services.simpleemail.model.ReceiptFilter
-
A structure that provides the IP addresses to block or allow, and whether
to block or allow incoming mail from them.
- withKmsKeyArn(String) - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The customer master key that Amazon SES should use to encrypt your emails
before saving them to the Amazon S3 bucket.
- withLambdaAction(LambdaAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Calls an AWS Lambda function, and optionally, publishes a notification to
Amazon SNS.
- withLastAttemptDate(Date) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The time the final delivery attempt was made, in
RFC 822 date-time format.
- withMailFromDomain(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The custom MAIL FROM domain that the identity is configured to use.
- withMailFromDomain(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityMailFromDomainRequest
-
The custom MAIL FROM domain that you want the verified identity to use.
- withMailFromDomainAttributes(Map<String, IdentityMailFromDomainAttributes>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityMailFromDomainAttributesResult
-
A map of identities to custom MAIL FROM attributes.
- withMailFromDomainStatus(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The state that indicates whether Amazon SES has successfully read the MX
record required for custom MAIL FROM domain setup.
- withMailFromDomainStatus(CustomMailFromStatus) - Method in class com.amazonaws.services.simpleemail.model.IdentityMailFromDomainAttributes
-
The state that indicates whether Amazon SES has successfully read the MX
record required for custom MAIL FROM domain setup.
- withMax24HourSend(Double) - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The maximum number of emails the user is allowed to send in a 24-hour
interval.
- withMaxItems(Integer) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The maximum number of identities per page.
- withMaxSendRate(Double) - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The maximum number of emails that Amazon SES can accept from the user's
account per second.
- withMessage(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
Human-readable text to include in the bounce message.
- withMessage(Message) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The message to be sent.
- withMessageDsn(MessageDsn) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
Message-related DSN fields.
- withMessageId(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceResult
-
The message ID of the bounce message.
- withMessageId(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailResult
-
The unique message identifier returned from the SendEmail
action.
- withMessageId(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailResult
-
The unique message identifier returned from the SendRawEmail
action.
- withMetadata(ReceiptRuleSetMetadata) - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetResult
-
The metadata for the currently active receipt rule set.
- withMetadata(ReceiptRuleSetMetadata) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetResult
-
The metadata for the receipt rule set, which consists of the rule set
name and the timestamp of when the rule set was created.
- withName(String) - Method in class com.amazonaws.services.simpleemail.model.ExtensionField
-
The name of the header to add.
- withName(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptFilter
-
The name of the IP address filter.
- withName(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
The name of the receipt rule.
- withName(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRuleSetMetadata
-
The name of the receipt rule set.
- withNextToken(String) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesRequest
-
The token to use for pagination.
- withNextToken(String) - Method in class com.amazonaws.services.simpleemail.model.ListIdentitiesResult
-
The token used for pagination.
- withNextToken(String) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsRequest
-
A token returned from a previous call to ListReceiptRuleSets
to indicate the position in the receipt rule set list.
- withNextToken(String) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsResult
-
A token indicating that there are additional receipt rule sets available
to be listed.
- withNotificationAttributes(Map<String, IdentityNotificationAttributes>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityNotificationAttributesResult
-
A map of Identity to IdentityNotificationAttributes.
- withNotificationType(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
The notification type for which to enable or disable headers in
notifications.
- withNotificationType(NotificationType) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityHeadersInNotificationsEnabledRequest
-
The notification type for which to enable or disable headers in
notifications.
- withNotificationType(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The type of notifications that will be published to the specified Amazon
SNS topic.
- withNotificationType(NotificationType) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The type of notifications that will be published to the specified Amazon
SNS topic.
- withObjectKeyPrefix(String) - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The key prefix of the Amazon S3 bucket.
- withOrganizationArn(String) - Method in class com.amazonaws.services.simpleemail.model.WorkmailAction
-
The ARN of the Amazon WorkMail organization.
- withOriginalMessageId(String) - Method in class com.amazonaws.services.simpleemail.model.SendBounceRequest
-
The message ID of the message to be bounced.
- withOriginalRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.CloneReceiptRuleSetRequest
-
The name of the rule set to clone.
- withPolicies(Map<String, String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesResult
-
A map of policy names to policies.
- withPolicy(String) - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The text of the policy in JSON format.
- withPolicy(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
Indicates whether to block or allow incoming mail from the specified IP
addresses.
- withPolicy(ReceiptFilterPolicy) - Method in class com.amazonaws.services.simpleemail.model.ReceiptIpFilter
-
Indicates whether to block or allow incoming mail from the specified IP
addresses.
- withPolicyName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteIdentityPolicyRequest
-
The name of the policy to be deleted.
- withPolicyName(String) - Method in class com.amazonaws.services.simpleemail.model.PutIdentityPolicyRequest
-
The name of the policy.
- withPolicyNames(String...) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
A list of the names of policies to be retrieved.
- withPolicyNames(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityPoliciesRequest
-
A list of the names of policies to be retrieved.
- withPolicyNames(String...) - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesResult
-
A list of names of policies that apply to the specified identity.
- withPolicyNames(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ListIdentityPoliciesResult
-
A list of names of policies that apply to the specified identity.
- withRawMessage(RawMessage) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
The raw text of the message.
- withRecipient(String) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
The email address of the recipient of the bounced email.
- withRecipientArn(String) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
This parameter is used only for sending authorization.
- withRecipientDsnFields(RecipientDsnFields) - Method in class com.amazonaws.services.simpleemail.model.BouncedRecipientInfo
-
Recipient-related DSN fields, most of which would normally be filled in
automatically when provided with a BounceType.
- withRecipients(String...) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
The recipient domains and email addresses to which the receipt rule
applies.
- withRecipients(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
The recipient domains and email addresses to which the receipt rule
applies.
- withRejects(Long) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Number of emails rejected by Amazon SES.
- withRemoteMta(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The MTA to which the remote MTA attempted to deliver the message,
formatted as specified in
RFC 3464 (
mta-name-type; mta-name).
- withReplyToAddresses(String...) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The reply-to email address(es) for the message.
- withReplyToAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The reply-to email address(es) for the message.
- withReportingMta(String) - Method in class com.amazonaws.services.simpleemail.model.MessageDsn
-
The reporting MTA that attempted to deliver the message, formatted as
specified in
RFC 3464 (
mta-name-type; mta-name).
- withReturnPath(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The email address to which bounces and complaints are to be forwarded
when feedback forwarding is enabled.
- withReturnPathArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
This parameter is used only for sending authorization.
- withReturnPathArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- withRule(ReceiptRule) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
A data structure that contains the specified rule's name, actions,
recipients, domains, enabled status, scan status, and TLS policy.
- withRule(ReceiptRule) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleResult
-
A data structure that contains the specified receipt rule's name,
actions, recipients, domains, enabled status, scan status, and Transport
Layer Security (TLS) policy.
- withRule(ReceiptRule) - Method in class com.amazonaws.services.simpleemail.model.UpdateReceiptRuleRequest
-
A data structure that contains the updated receipt rule information.
- withRuleName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleRequest
-
The name of the receipt rule to delete.
- withRuleName(String) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleRequest
-
The name of the receipt rule.
- withRuleName(String) - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule to reposition.
- withRuleNames(String...) - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetRequest
-
A list of the specified receipt rule set's receipt rules in the order
that you want to put them.
- withRuleNames(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetRequest
-
A list of the specified receipt rule set's receipt rules in the order
that you want to put them.
- withRules(ReceiptRule...) - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetResult
-
The receipt rules that belong to the active rule set.
- withRules(Collection<ReceiptRule>) - Method in class com.amazonaws.services.simpleemail.model.DescribeActiveReceiptRuleSetResult
-
The receipt rules that belong to the active rule set.
- withRules(ReceiptRule...) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetResult
-
A list of the receipt rules that belong to the specified receipt rule
set.
- withRules(Collection<ReceiptRule>) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetResult
-
A list of the receipt rules that belong to the specified receipt rule
set.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.CloneReceiptRuleSetRequest
-
The name of the rule set to create.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleRequest
-
The name of the rule set to which to add the rule.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.CreateReceiptRuleSetRequest
-
The name of the rule set to create.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleRequest
-
The name of the receipt rule set that contains the receipt rule to
delete.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.DeleteReceiptRuleSetRequest
-
The name of the receipt rule set to delete.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleRequest
-
The name of the receipt rule set to which the receipt rule belongs.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.DescribeReceiptRuleSetRequest
-
The name of the receipt rule set to describe.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.ReorderReceiptRuleSetRequest
-
The name of the receipt rule set to reorder.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.SetActiveReceiptRuleSetRequest
-
The name of the receipt rule set to make active.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.SetReceiptRulePositionRequest
-
The name of the receipt rule set that contains the receipt rule to
reposition.
- withRuleSetName(String) - Method in class com.amazonaws.services.simpleemail.model.UpdateReceiptRuleRequest
-
The name of the receipt rule set to which the receipt rule belongs.
- withRuleSets(ReceiptRuleSetMetadata...) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsResult
-
The metadata for the currently active receipt rule set.
- withRuleSets(Collection<ReceiptRuleSetMetadata>) - Method in class com.amazonaws.services.simpleemail.model.ListReceiptRuleSetsResult
-
The metadata for the currently active receipt rule set.
- withS3Action(S3Action) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Saves the received message to an Amazon Simple Storage Service (Amazon
S3) bucket and, optionally, publishes a notification to Amazon SNS.
- withScanEnabled(Boolean) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
If true, then messages to which this receipt rule applies
are scanned for spam and viruses.
- withScope(String) - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
The scope to which the Stop action applies.
- withScope(StopScope) - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
The scope to which the Stop action applies.
- withSendDataPoints(SendDataPoint...) - Method in class com.amazonaws.services.simpleemail.model.GetSendStatisticsResult
-
A list of data points, each of which represents 15 minutes of activity.
- withSendDataPoints(Collection<SendDataPoint>) - Method in class com.amazonaws.services.simpleemail.model.GetSendStatisticsResult
-
A list of data points, each of which represents 15 minutes of activity.
- withSender(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The email address of the sender of the bounced email.
- withSentLast24Hours(Double) - Method in class com.amazonaws.services.simpleemail.model.GetSendQuotaResult
-
The number of emails sent during the previous 24 hours.
- withSmtpReplyCode(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The SMTP reply code, as defined by
RFC 5321.
- withSNSAction(SNSAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Publishes the email content within a notification to Amazon SNS.
- withSnsTopic(String) - Method in class com.amazonaws.services.simpleemail.model.SetIdentityNotificationTopicRequest
-
The Amazon Resource Name (ARN) of the Amazon SNS topic.
- withSource(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
The email address that is sending the email.
- withSource(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
The identity's email address.
- withSourceArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendEmailRequest
-
This parameter is used only for sending authorization.
- withSourceArn(String) - Method in class com.amazonaws.services.simpleemail.model.SendRawEmailRequest
-
This parameter is used only for sending authorization.
- withStatus(String) - Method in class com.amazonaws.services.simpleemail.model.RecipientDsnFields
-
The status code that indicates what went wrong.
- withStatusCode(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The SMTP enhanced status code, as defined by
RFC 3463.
- withStopAction(StopAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Terminates the evaluation of the receipt rule set and optionally
publishes a notification to Amazon SNS.
- withSubject(Content) - Method in class com.amazonaws.services.simpleemail.model.Message
-
The subject of the message: A short summary of the content, which will
appear in the recipient's inbox.
- withText(Content) - Method in class com.amazonaws.services.simpleemail.model.Body
-
The content of the message, in text format.
- withTimestamp(Date) - Method in class com.amazonaws.services.simpleemail.model.SendDataPoint
-
Time of the data point.
- withTlsPolicy(String) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
Specifies whether Amazon SES should require that incoming email is
delivered over a connection encrypted with Transport Layer Security
(TLS).
- withTlsPolicy(TlsPolicy) - Method in class com.amazonaws.services.simpleemail.model.ReceiptRule
-
Specifies whether Amazon SES should require that incoming email is
delivered over a connection encrypted with Transport Layer Security
(TLS).
- withToAddresses(String...) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The To: field(s) of the message.
- withToAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.Destination
-
The To: field(s) of the message.
- withTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.BounceAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
bounce action is taken.
- withTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.LambdaAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
Lambda action is taken.
- withTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.S3Action
-
The ARN of the Amazon SNS topic to notify when the message is saved to
the Amazon S3 bucket.
- withTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.SNSAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify.
- withTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.StopAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
stop action is taken.
- withTopicArn(String) - Method in class com.amazonaws.services.simpleemail.model.WorkmailAction
-
The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the
WorkMail action is called.
- withValue(String) - Method in class com.amazonaws.services.simpleemail.model.ExtensionField
-
The value of the header to add.
- withVerificationAttributes(Map<String, IdentityVerificationAttributes>) - Method in class com.amazonaws.services.simpleemail.model.GetIdentityVerificationAttributesResult
-
A map of Identities to IdentityVerificationAttributes objects.
- withVerificationStatus(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
The verification status of the identity: "Pending", "Success", "Failed",
or "TemporaryFailure".
- withVerificationStatus(VerificationStatus) - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
The verification status of the identity: "Pending", "Success", "Failed",
or "TemporaryFailure".
- withVerificationToken(String) - Method in class com.amazonaws.services.simpleemail.model.IdentityVerificationAttributes
-
The verification token for a domain identity.
- withVerificationToken(String) - Method in class com.amazonaws.services.simpleemail.model.VerifyDomainIdentityResult
-
A TXT record that must be placed in the DNS settings for the domain, in
order to complete domain verification.
- withVerifiedEmailAddresses(String...) - Method in class com.amazonaws.services.simpleemail.model.ListVerifiedEmailAddressesResult
-
A list of email addresses that have been verified.
- withVerifiedEmailAddresses(Collection<String>) - Method in class com.amazonaws.services.simpleemail.model.ListVerifiedEmailAddressesResult
-
A list of email addresses that have been verified.
- withWorkmailAction(WorkmailAction) - Method in class com.amazonaws.services.simpleemail.model.ReceiptAction
-
Calls Amazon WorkMail and, optionally, publishes a notification to Amazon
SNS.
- WorkmailAction - Class in com.amazonaws.services.simpleemail.model
-
When included in a receipt rule, this action calls Amazon WorkMail and,
optionally, publishes a notification to Amazon Simple Notification Service
(Amazon SNS).
- WorkmailAction() - Constructor for class com.amazonaws.services.simpleemail.model.WorkmailAction
-