public class UpdateItemRequest extends AmazonWebServiceRequest implements Serializable, Cloneable
Represents the input of an UpdateItem operation.
NOOP| Constructor and Description |
|---|
UpdateItemRequest()
Default constructor for UpdateItemRequest object.
|
UpdateItemRequest(String tableName,
Map<String,AttributeValue> key,
Map<String,AttributeValueUpdate> attributeUpdates)
Constructs a new UpdateItemRequest object.
|
UpdateItemRequest(String tableName,
Map<String,AttributeValue> key,
Map<String,AttributeValueUpdate> attributeUpdates,
ReturnValue returnValues)
Constructs a new UpdateItemRequest object.
|
UpdateItemRequest(String tableName,
Map<String,AttributeValue> key,
Map<String,AttributeValueUpdate> attributeUpdates,
String returnValues)
Constructs a new UpdateItemRequest object.
|
| Modifier and Type | Method and Description |
|---|---|
UpdateItemRequest |
addAttributeUpdatesEntry(String key,
AttributeValueUpdate value) |
UpdateItemRequest |
addExpectedEntry(String key,
ExpectedAttributeValue value) |
UpdateItemRequest |
addExpressionAttributeNamesEntry(String key,
String value) |
UpdateItemRequest |
addExpressionAttributeValuesEntry(String key,
AttributeValue value) |
UpdateItemRequest |
addKeyEntry(String key,
AttributeValue value) |
UpdateItemRequest |
clearAttributeUpdatesEntries()
Removes all the entries added into AttributeUpdates.
|
UpdateItemRequest |
clearExpectedEntries()
Removes all the entries added into Expected.
|
UpdateItemRequest |
clearExpressionAttributeNamesEntries()
Removes all the entries added into ExpressionAttributeNames.
|
UpdateItemRequest |
clearExpressionAttributeValuesEntries()
Removes all the entries added into ExpressionAttributeValues.
|
UpdateItemRequest |
clearKeyEntries()
Removes all the entries added into Key.
|
UpdateItemRequest |
clone() |
boolean |
equals(Object obj) |
Map<String,AttributeValueUpdate> |
getAttributeUpdates()
|
String |
getConditionalOperator()
|
String |
getConditionExpression()
A condition that must be satisfied in order for a conditional update to
succeed.
|
Map<String,ExpectedAttributeValue> |
getExpected()
|
Map<String,String> |
getExpressionAttributeNames()
One or more substitution tokens for attribute names in an expression.
|
Map<String,AttributeValue> |
getExpressionAttributeValues()
One or more values that can be substituted in an expression.
|
Map<String,AttributeValue> |
getKey()
The primary key of the item to be updated.
|
String |
getReturnConsumedCapacity()
Returns the value of the ReturnConsumedCapacity property for this object.
|
String |
getReturnItemCollectionMetrics()
Determines whether item collection metrics are returned.
|
String |
getReturnValues()
Use ReturnValues if you want to get the item attributes as they
appeared either before or after they were updated.
|
String |
getTableName()
The name of the table containing the item to update.
|
String |
getUpdateExpression()
An expression that defines one or more attributes to be updated, the
action to be performed on them, and new value(s) for them.
|
int |
hashCode() |
void |
setAttributeUpdates(Map<String,AttributeValueUpdate> attributeUpdates)
|
void |
setConditionalOperator(ConditionalOperator conditionalOperator)
|
void |
setConditionalOperator(String conditionalOperator)
|
void |
setConditionExpression(String conditionExpression)
A condition that must be satisfied in order for a conditional update to
succeed.
|
void |
setExpected(Map<String,ExpectedAttributeValue> expected)
|
void |
setExpressionAttributeNames(Map<String,String> expressionAttributeNames)
One or more substitution tokens for attribute names in an expression.
|
void |
setExpressionAttributeValues(Map<String,AttributeValue> expressionAttributeValues)
One or more values that can be substituted in an expression.
|
void |
setKey(Map.Entry<String,AttributeValue> hashKey,
Map.Entry<String,AttributeValue> rangeKey)
Set the hash and range key attributes of the item.
|
void |
setKey(Map<String,AttributeValue> key)
The primary key of the item to be updated.
|
void |
setReturnConsumedCapacity(ReturnConsumedCapacity returnConsumedCapacity)
Sets the value of the ReturnConsumedCapacity property for this object.
|
void |
setReturnConsumedCapacity(String returnConsumedCapacity)
Sets the value of the ReturnConsumedCapacity property for this object.
|
void |
setReturnItemCollectionMetrics(ReturnItemCollectionMetrics returnItemCollectionMetrics)
Determines whether item collection metrics are returned.
|
void |
setReturnItemCollectionMetrics(String returnItemCollectionMetrics)
Determines whether item collection metrics are returned.
|
void |
setReturnValues(ReturnValue returnValues)
Use ReturnValues if you want to get the item attributes as they
appeared either before or after they were updated.
|
void |
setReturnValues(String returnValues)
Use ReturnValues if you want to get the item attributes as they
appeared either before or after they were updated.
|
void |
setTableName(String tableName)
The name of the table containing the item to update.
|
void |
setUpdateExpression(String updateExpression)
An expression that defines one or more attributes to be updated, the
action to be performed on them, and new value(s) for them.
|
String |
toString()
Returns a string representation of this object; useful for testing and
debugging.
|
UpdateItemRequest |
withAttributeUpdates(Map<String,AttributeValueUpdate> attributeUpdates)
|
UpdateItemRequest |
withConditionalOperator(ConditionalOperator conditionalOperator)
|
UpdateItemRequest |
withConditionalOperator(String conditionalOperator)
|
UpdateItemRequest |
withConditionExpression(String conditionExpression)
A condition that must be satisfied in order for a conditional update to
succeed.
|
UpdateItemRequest |
withExpected(Map<String,ExpectedAttributeValue> expected)
|
UpdateItemRequest |
withExpressionAttributeNames(Map<String,String> expressionAttributeNames)
One or more substitution tokens for attribute names in an expression.
|
UpdateItemRequest |
withExpressionAttributeValues(Map<String,AttributeValue> expressionAttributeValues)
One or more values that can be substituted in an expression.
|
UpdateItemRequest |
withKey(Map.Entry<String,AttributeValue> hashKey,
Map.Entry<String,AttributeValue> rangeKey)
Set the hash and range key attributes of the item.
|
UpdateItemRequest |
withKey(Map<String,AttributeValue> key)
The primary key of the item to be updated.
|
UpdateItemRequest |
withReturnConsumedCapacity(ReturnConsumedCapacity returnConsumedCapacity)
Sets the value of the ReturnConsumedCapacity property for this object.
|
UpdateItemRequest |
withReturnConsumedCapacity(String returnConsumedCapacity)
Sets the value of the ReturnConsumedCapacity property for this object.
|
UpdateItemRequest |
withReturnItemCollectionMetrics(ReturnItemCollectionMetrics returnItemCollectionMetrics)
Determines whether item collection metrics are returned.
|
UpdateItemRequest |
withReturnItemCollectionMetrics(String returnItemCollectionMetrics)
Determines whether item collection metrics are returned.
|
UpdateItemRequest |
withReturnValues(ReturnValue returnValues)
Use ReturnValues if you want to get the item attributes as they
appeared either before or after they were updated.
|
UpdateItemRequest |
withReturnValues(String returnValues)
Use ReturnValues if you want to get the item attributes as they
appeared either before or after they were updated.
|
UpdateItemRequest |
withTableName(String tableName)
The name of the table containing the item to update.
|
UpdateItemRequest |
withUpdateExpression(String updateExpression)
An expression that defines one or more attributes to be updated, the
action to be performed on them, and new value(s) for them.
|
copyBaseTo, getCloneRoot, getCloneSource, getCustomQueryParameters, getCustomRequestHeaders, getGeneralProgressListener, getReadLimit, getRequestClientOptions, getRequestCredentials, getRequestMetricCollector, putCustomQueryParameter, putCustomRequestHeader, setGeneralProgressListener, setRequestCredentials, setRequestMetricCollector, withGeneralProgressListener, withRequestMetricCollectorpublic UpdateItemRequest()
public UpdateItemRequest(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates)
tableName - The name of the table containing the item to update.key - The primary key of the item to be updated. Each element consists
of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
attributeUpdates - This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update.
This action is only valid for an existing attribute whose data
type is Number or is a set; do not use ADD for other
data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If
the attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no
value is specified for DELETE. The data type of the
specified value must match the existing value's data type.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute, with a value of 3.
If the existing data type is a set, and if Value is also a
set, then Value is appended to the existing set. For
example, if the attribute value is the set [1,2], and
the ADD action specified [3], then the
final attribute value is [1,2,3]. An error occurs if
an ADD action is specified for a set attribute and
the attribute type specified does not match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot
be deleted from a nonexistent item. The operation succeeds, but
DynamoDB does not create a new item.
ADD - Causes DynamoDB to create an item with the
supplied primary key and number (or set of numbers) for the
attribute value. The only data types allowed are Number and Number
Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
public UpdateItemRequest(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates, String returnValues)
tableName - The name of the table containing the item to update.key - The primary key of the item to be updated. Each element consists
of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
attributeUpdates - This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update.
This action is only valid for an existing attribute whose data
type is Number or is a set; do not use ADD for other
data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If
the attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no
value is specified for DELETE. The data type of the
specified value must match the existing value's data type.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute, with a value of 3.
If the existing data type is a set, and if Value is also a
set, then Value is appended to the existing set. For
example, if the attribute value is the set [1,2], and
the ADD action specified [3], then the
final attribute value is [1,2,3]. An error occurs if
an ADD action is specified for a set attribute and
the attribute type specified does not match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot
be deleted from a nonexistent item. The operation succeeds, but
DynamoDB does not create a new item.
ADD - Causes DynamoDB to create an item with the
supplied primary key and number (or set of numbers) for the
attribute value. The only data types allowed are Number and Number
Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
returnValues - Use ReturnValues if you want to get the item attributes as
they appeared either before or after they were updated. For
UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if
its value is NONE, then nothing is returned. (This
setting is the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of
the item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
public UpdateItemRequest(String tableName, Map<String,AttributeValue> key, Map<String,AttributeValueUpdate> attributeUpdates, ReturnValue returnValues)
tableName - The name of the table containing the item to update.key - The primary key of the item to be updated. Each element consists
of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
attributeUpdates - This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update.
This action is only valid for an existing attribute whose data
type is Number or is a set; do not use ADD for other
data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If
the attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no
value is specified for DELETE. The data type of the
specified value must match the existing value's data type.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute, with a value of 3.
If the existing data type is a set, and if Value is also a
set, then Value is appended to the existing set. For
example, if the attribute value is the set [1,2], and
the ADD action specified [3], then the
final attribute value is [1,2,3]. An error occurs if
an ADD action is specified for a set attribute and
the attribute type specified does not match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot
be deleted from a nonexistent item. The operation succeeds, but
DynamoDB does not create a new item.
ADD - Causes DynamoDB to create an item with the
supplied primary key and number (or set of numbers) for the
attribute value. The only data types allowed are Number and Number
Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
returnValues - Use ReturnValues if you want to get the item attributes as
they appeared either before or after they were updated. For
UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if
its value is NONE, then nothing is returned. (This
setting is the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of
the item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
public void setTableName(String tableName)
The name of the table containing the item to update.
tableName - The name of the table containing the item to update.public String getTableName()
The name of the table containing the item to update.
public UpdateItemRequest withTableName(String tableName)
The name of the table containing the item to update.
tableName - The name of the table containing the item to update.public Map<String,AttributeValue> getKey()
The primary key of the item to be updated. Each element consists of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
public void setKey(Map<String,AttributeValue> key)
The primary key of the item to be updated. Each element consists of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
key - The primary key of the item to be updated. Each element consists
of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
public UpdateItemRequest withKey(Map<String,AttributeValue> key)
The primary key of the item to be updated. Each element consists of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
key - The primary key of the item to be updated. Each element consists
of an attribute name and a value for that attribute.
For the primary key, you must provide all of the attributes. For example, with a hash type primary key, you only need to provide the hash attribute. For a hash-and-range type primary key, you must provide both the hash attribute and the range attribute.
public UpdateItemRequest addKeyEntry(String key, AttributeValue value)
public UpdateItemRequest clearKeyEntries()
public Map<String,AttributeValueUpdate> getAttributeUpdates()
This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update. This
action is only valid for an existing attribute whose data type is Number
or is a set; do not use ADD for other data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If the
attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no value is
specified for DELETE. The data type of the specified value
must match the existing value's data type.
If a set of values is specified, then those values are subtracted from
the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is [b].
Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the attribute
does not already exist. If the attribute does exist, then the behavior of
ADD depends on the data type of the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number value for
an item that doesn't exist before the update, DynamoDB uses 0 as the
initial value.
Similarly, if you use ADD for an existing item to increment
or decrement an attribute value that doesn't exist before the update,
DynamoDB uses 0 as the initial value. For example, suppose
that the item you want to update doesn't have an attribute named
itemcount, but you decide to ADD the number
3 to this attribute anyway. DynamoDB will create the
itemcount attribute, set its initial value to 0, and
finally add 3 to it. The result will be a new
itemcount attribute, with a value of 3.
If the existing data type is a set, and if Value is also a set,
then Value is appended to the existing set. For example, if the
attribute value is the set [1,2], and the ADD
action specified [3], then the final attribute value is
[1,2,3]. An error occurs if an ADD action is
specified for a set attribute and the attribute type specified does not
match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot be
deleted from a nonexistent item. The operation succeeds, but DynamoDB
does not create a new item.
ADD - Causes DynamoDB to create an item with the supplied
primary key and number (or set of numbers) for the attribute value. The
only data types allowed are Number and Number Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update.
This action is only valid for an existing attribute whose data
type is Number or is a set; do not use ADD for other
data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If
the attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no
value is specified for DELETE. The data type of the
specified value must match the existing value's data type.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute, with a value of 3.
If the existing data type is a set, and if Value is also a
set, then Value is appended to the existing set. For
example, if the attribute value is the set [1,2],
and the ADD action specified [3], then
the final attribute value is [1,2,3]. An error
occurs if an ADD action is specified for a set
attribute and the attribute type specified does not match the
existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot
be deleted from a nonexistent item. The operation succeeds, but
DynamoDB does not create a new item.
ADD - Causes DynamoDB to create an item with the
supplied primary key and number (or set of numbers) for the
attribute value. The only data types allowed are Number and
Number Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
public void setAttributeUpdates(Map<String,AttributeValueUpdate> attributeUpdates)
This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update. This
action is only valid for an existing attribute whose data type is Number
or is a set; do not use ADD for other data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If the
attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no value is
specified for DELETE. The data type of the specified value
must match the existing value's data type.
If a set of values is specified, then those values are subtracted from
the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is [b].
Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the attribute
does not already exist. If the attribute does exist, then the behavior of
ADD depends on the data type of the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number value for
an item that doesn't exist before the update, DynamoDB uses 0 as the
initial value.
Similarly, if you use ADD for an existing item to increment
or decrement an attribute value that doesn't exist before the update,
DynamoDB uses 0 as the initial value. For example, suppose
that the item you want to update doesn't have an attribute named
itemcount, but you decide to ADD the number
3 to this attribute anyway. DynamoDB will create the
itemcount attribute, set its initial value to 0, and
finally add 3 to it. The result will be a new
itemcount attribute, with a value of 3.
If the existing data type is a set, and if Value is also a set,
then Value is appended to the existing set. For example, if the
attribute value is the set [1,2], and the ADD
action specified [3], then the final attribute value is
[1,2,3]. An error occurs if an ADD action is
specified for a set attribute and the attribute type specified does not
match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot be
deleted from a nonexistent item. The operation succeeds, but DynamoDB
does not create a new item.
ADD - Causes DynamoDB to create an item with the supplied
primary key and number (or set of numbers) for the attribute value. The
only data types allowed are Number and Number Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
attributeUpdates - This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update.
This action is only valid for an existing attribute whose data
type is Number or is a set; do not use ADD for other
data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If
the attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no
value is specified for DELETE. The data type of the
specified value must match the existing value's data type.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute, with a value of 3.
If the existing data type is a set, and if Value is also a
set, then Value is appended to the existing set. For
example, if the attribute value is the set [1,2], and
the ADD action specified [3], then the
final attribute value is [1,2,3]. An error occurs if
an ADD action is specified for a set attribute and
the attribute type specified does not match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot
be deleted from a nonexistent item. The operation succeeds, but
DynamoDB does not create a new item.
ADD - Causes DynamoDB to create an item with the
supplied primary key and number (or set of numbers) for the
attribute value. The only data types allowed are Number and Number
Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
public UpdateItemRequest withAttributeUpdates(Map<String,AttributeValueUpdate> attributeUpdates)
This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update. This
action is only valid for an existing attribute whose data type is Number
or is a set; do not use ADD for other data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If the
attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no value is
specified for DELETE. The data type of the specified value
must match the existing value's data type.
If a set of values is specified, then those values are subtracted from
the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is [b].
Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the attribute
does not already exist. If the attribute does exist, then the behavior of
ADD depends on the data type of the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number value for
an item that doesn't exist before the update, DynamoDB uses 0 as the
initial value.
Similarly, if you use ADD for an existing item to increment
or decrement an attribute value that doesn't exist before the update,
DynamoDB uses 0 as the initial value. For example, suppose
that the item you want to update doesn't have an attribute named
itemcount, but you decide to ADD the number
3 to this attribute anyway. DynamoDB will create the
itemcount attribute, set its initial value to 0, and
finally add 3 to it. The result will be a new
itemcount attribute, with a value of 3.
If the existing data type is a set, and if Value is also a set,
then Value is appended to the existing set. For example, if the
attribute value is the set [1,2], and the ADD
action specified [3], then the final attribute value is
[1,2,3]. An error occurs if an ADD action is
specified for a set attribute and the attribute type specified does not
match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot be
deleted from a nonexistent item. The operation succeeds, but DynamoDB
does not create a new item.
ADD - Causes DynamoDB to create an item with the supplied
primary key and number (or set of numbers) for the attribute value. The
only data types allowed are Number and Number Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
attributeUpdates - This is a legacy parameter, for backward compatibility. New applications should use UpdateExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
This parameter can be used for modifying top-level attributes; however, it does not support individual list or map elements.
The names of attributes to be modified, the action to perform on each, and the new value for each. If you are updating an attribute that is an index key attribute for any indexes on that table, the attribute type must match the index key type defined in the AttributesDefinition of the table description. You can use UpdateItem to update any nonkey attributes.
Attribute values cannot be null. String and Binary type attributes must have lengths greater than zero. Set type attributes must not be empty. Requests with empty values will be rejected with a ValidationException exception.
Each AttributeUpdates element consists of an attribute name to modify, along with the following:
Value - The new value, if applicable, for this attribute.
Action - A value that specifies how to perform the update.
This action is only valid for an existing attribute whose data
type is Number or is a set; do not use ADD for other
data types.
If an item with the specified primary key is found in the table, the following values perform the following actions:
PUT - Adds the specified attribute to the item. If
the attribute already exists, it is replaced by the new value.
DELETE - Removes the attribute and its value, if no
value is specified for DELETE. The data type of the
specified value must match the existing value's data type.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute, with a value of 3.
If the existing data type is a set, and if Value is also a
set, then Value is appended to the existing set. For
example, if the attribute value is the set [1,2], and
the ADD action specified [3], then the
final attribute value is [1,2,3]. An error occurs if
an ADD action is specified for a set attribute and
the attribute type specified does not match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, Value must also be a set of strings.
If no item with the specified key is found in the table, the following values perform the following actions:
PUT - Causes DynamoDB to create a new item with the
specified primary key, and then adds the attribute.
DELETE - Nothing happens, because attributes cannot
be deleted from a nonexistent item. The operation succeeds, but
DynamoDB does not create a new item.
ADD - Causes DynamoDB to create an item with the
supplied primary key and number (or set of numbers) for the
attribute value. The only data types allowed are Number and Number
Set.
If you provide any attributes that are part of an index key, then the data types for those attributes must match those of the schema in the table's attribute definition.
public UpdateItemRequest addAttributeUpdatesEntry(String key, AttributeValueUpdate value)
public UpdateItemRequest clearAttributeUpdatesEntries()
public Map<String,ExpectedAttributeValue> getExpected()
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A map of attribute/condition pairs. Expected provides a conditional block for the UpdateItem operation.
Each element of Expected consists of an attribute name, a comparison operator, and one or more values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each Expected element, the result of the evaluation is either true or false.
If you specify more than one element in the Expected map, then by default all of the conditions must evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to true, rather than all of them.)
If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
Expected contains the following:
AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values in the list depends on the ComparisonOperator being used.
For type Number, value comparisons are numeric.
String value comparisons for greater than, equals, or less than are based
on ASCII character code values. For example, a is greater
than A, and a is greater than B.
For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When performing the comparison, DynamoDB uses strongly consistent reads.
The following comparison operators are available:
EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
The following are descriptions of each comparison operator.
EQ : Equal. EQ is supported for all datatypes,
including lists and maps.
AttributeValueList can contain only one AttributeValue
element of type String, Number, Binary, String Set, Number Set, or Binary
Set. If an item contains an AttributeValue element of a different
type than the one provided in the request, the value does not match. For
example, {"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
NE : Not equal. NE is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one AttributeValue of
type String, Number, Binary, String Set, Number Set, or Binary Set. If an
item contains an AttributeValue of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not equal {"NS":["6", "2", "1"]}
.
LE : Less than or equal.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
LT : Less than.
AttributeValueList can contain only one AttributeValue of
type String, Number, or Binary (not a set type). If an item contains an
AttributeValue element of a different type than the one provided
in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
GE : Greater than or equal.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
GT : Greater than.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
NOT_NULL : The attribute exists. NOT_NULL is
supported for all datatypes, including lists and maps.
This operator tests for the existence of an attribute, not its data type.
If the data type of attribute "a" is null, and you evaluate
it using NOT_NULL, the result is a Boolean true. This
result is because the attribute "a" exists; its data type is
not relevant to the NOT_NULL comparison operator.
NULL : The attribute does not exist. NULL is
supported for all datatypes, including lists and maps.
This operator tests for the nonexistence of an attribute, not its data
type. If the data type of attribute "a" is null, and you
evaluate it using NULL, the result is a Boolean
false. This is because the attribute "a" exists; its
data type is not relevant to the NULL comparison operator.
CONTAINS : Checks for a subsequence, or value in a set.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If the target
attribute of the comparison is of type String, then the operator checks
for a substring match. If the target attribute of the comparison is of
type Binary, then the operator looks for a subsequence of the target that
matches the input. If the target attribute of the comparison is a set ("
SS", "NS", or "BS"), then the
operator evaluates to true if it finds an exact match with any member of
the set.
CONTAINS is supported for lists: When evaluating "
a CONTAINS b", "a" can be a list; however, "
b" cannot be a set, a map, or a list.
NOT_CONTAINS : Checks for absence of a subsequence, or
absence of a value in a set.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If the target
attribute of the comparison is a String, then the operator checks for the
absence of a substring match. If the target attribute of the comparison
is Binary, then the operator checks for the absence of a subsequence of
the target that matches the input. If the target attribute of the
comparison is a set ("SS", "NS", or "
BS"), then the operator evaluates to true if it does
not find an exact match with any member of the set.
NOT_CONTAINS is supported for lists: When evaluating "
a NOT CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a map, or a
list.
BEGINS_WITH : Checks for a prefix.
AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
IN : Checks for matching elements within two sets.
AttributeValueList can contain one or more AttributeValue elements of type String, Number, or Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any elements of the input set are present in the item attribute, the expression evaluates to true.
BETWEEN : Greater than or equal to the first value, and less
than or equal to the second value.
AttributeValueList must contain two AttributeValue elements
of the same type, either String, Number, or Binary (not a set type). A
target attribute matches if the target value is greater than, or equal
to, the first element and less than, or equal to, the second element. If
an item contains an AttributeValue element of a different type
than the one provided in the request, the value does not match. For
example, {"S":"6"} does not compare to
{"N":"6"}. Also, {"N":"6"} does not compare to
{"NS":["6", "2", "1"]}
For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of AttributeValueList and ComparisonOperator:
Value - A value for DynamoDB to compare with an attribute.
Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional operation:
If Exists is true, DynamoDB will check to see if that
attribute value already exists in the table. If it is found, then the
condition evaluates to true; otherwise the condition evaluate to false.
If Exists is false, DynamoDB assumes that the
attribute value does not exist in the table. If in fact the value
does not exist, then the assumption is valid and the condition evaluates
to true. If the value is found, despite the assumption that it does not
exist, the condition evaluates to false.
Note that the default value for Exists is true.
The Value and Exists parameters are incompatible with AttributeValueList and ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a ValidationException exception.
This parameter does not support attributes of type List or Map.
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A map of attribute/condition pairs. Expected provides a conditional block for the UpdateItem operation.
Each element of Expected consists of an attribute name, a comparison operator, and one or more values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each Expected element, the result of the evaluation is either true or false.
If you specify more than one element in the Expected map, then by default all of the conditions must evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to true, rather than all of them.)
If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
Expected contains the following:
AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values in the list depends on the ComparisonOperator being used.
For type Number, value comparisons are numeric.
String value comparisons for greater than, equals, or less than
are based on ASCII character code values. For example,
a is greater than A, and a
is greater than B. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When performing the comparison, DynamoDB uses strongly consistent reads.
The following comparison operators are available:
EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
The following are descriptions of each comparison operator.
EQ : Equal. EQ is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one
AttributeValue element of type String, Number, Binary,
String Set, Number Set, or Binary Set. If an item contains an
AttributeValue element of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
NE : Not equal. NE is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one
AttributeValue of type String, Number, Binary, String Set,
Number Set, or Binary Set. If an item contains an
AttributeValue of a different type than the one provided
in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
LE : Less than or equal.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"}
does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
LT : Less than.
AttributeValueList can contain only one
AttributeValue of type String, Number, or Binary (not a
set type). If an item contains an AttributeValue element
of a different type than the one provided in the request, the
value does not match. For example, {"S":"6"} does
not equal {"N":"6"}. Also, {"N":"6"}
does not compare to {"NS":["6", "2", "1"]}.
GE : Greater than or equal.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"}
does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
GT : Greater than.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"}
does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
NOT_NULL : The attribute exists.
NOT_NULL is supported for all datatypes, including
lists and maps.
This operator tests for the existence of an attribute, not its
data type. If the data type of attribute "a" is
null, and you evaluate it using NOT_NULL, the result
is a Boolean true. This result is because the attribute "
a" exists; its data type is not relevant to the
NOT_NULL comparison operator.
NULL : The attribute does not exist.
NULL is supported for all datatypes, including lists
and maps.
This operator tests for the nonexistence of an attribute, not its
data type. If the data type of attribute "a" is
null, and you evaluate it using NULL, the result is
a Boolean false. This is because the attribute "
a" exists; its data type is not relevant to the
NULL comparison operator.
CONTAINS : Checks for a subsequence, or value in a
set.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If the target attribute of the comparison is of
type String, then the operator checks for a substring match. If
the target attribute of the comparison is of type Binary, then
the operator looks for a subsequence of the target that matches
the input. If the target attribute of the comparison is a set ("
SS", "NS", or "BS"), then
the operator evaluates to true if it finds an exact match with
any member of the set.
CONTAINS is supported for lists: When evaluating "
a CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a
map, or a list.
NOT_CONTAINS : Checks for absence of a subsequence,
or absence of a value in a set.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If the target attribute of the comparison is a
String, then the operator checks for the absence of a substring
match. If the target attribute of the comparison is Binary, then
the operator checks for the absence of a subsequence of the
target that matches the input. If the target attribute of the
comparison is a set ("SS", "NS", or "
BS"), then the operator evaluates to true if it
does not find an exact match with any member of the set.
NOT_CONTAINS is supported for lists: When evaluating "
a NOT CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a
map, or a list.
BEGINS_WITH : Checks for a prefix.
AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
IN : Checks for matching elements within two sets.
AttributeValueList can contain one or more AttributeValue elements of type String, Number, or Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any elements of the input set are present in the item attribute, the expression evaluates to true.
BETWEEN : Greater than or equal to the first value,
and less than or equal to the second value.
AttributeValueList must contain two AttributeValue
elements of the same type, either String, Number, or Binary (not
a set type). A target attribute matches if the target value is
greater than, or equal to, the first element and less than, or
equal to, the second element. If an item contains an
AttributeValue element of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not compare to {"N":"6"}
. Also, {"N":"6"} does not compare to
{"NS":["6", "2", "1"]}
For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of AttributeValueList and ComparisonOperator:
Value - A value for DynamoDB to compare with an attribute.
Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional operation:
If Exists is true, DynamoDB will check to see
if that attribute value already exists in the table. If it is
found, then the condition evaluates to true; otherwise the
condition evaluate to false.
If Exists is false, DynamoDB assumes that the
attribute value does not exist in the table. If in fact
the value does not exist, then the assumption is valid and the
condition evaluates to true. If the value is found, despite the
assumption that it does not exist, the condition evaluates to
false.
Note that the default value for Exists is
true.
The Value and Exists parameters are incompatible with AttributeValueList and ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a ValidationException exception.
This parameter does not support attributes of type List or Map.
public void setExpected(Map<String,ExpectedAttributeValue> expected)
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A map of attribute/condition pairs. Expected provides a conditional block for the UpdateItem operation.
Each element of Expected consists of an attribute name, a comparison operator, and one or more values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each Expected element, the result of the evaluation is either true or false.
If you specify more than one element in the Expected map, then by default all of the conditions must evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to true, rather than all of them.)
If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
Expected contains the following:
AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values in the list depends on the ComparisonOperator being used.
For type Number, value comparisons are numeric.
String value comparisons for greater than, equals, or less than are based
on ASCII character code values. For example, a is greater
than A, and a is greater than B.
For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When performing the comparison, DynamoDB uses strongly consistent reads.
The following comparison operators are available:
EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
The following are descriptions of each comparison operator.
EQ : Equal. EQ is supported for all datatypes,
including lists and maps.
AttributeValueList can contain only one AttributeValue
element of type String, Number, Binary, String Set, Number Set, or Binary
Set. If an item contains an AttributeValue element of a different
type than the one provided in the request, the value does not match. For
example, {"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
NE : Not equal. NE is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one AttributeValue of
type String, Number, Binary, String Set, Number Set, or Binary Set. If an
item contains an AttributeValue of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not equal {"NS":["6", "2", "1"]}
.
LE : Less than or equal.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
LT : Less than.
AttributeValueList can contain only one AttributeValue of
type String, Number, or Binary (not a set type). If an item contains an
AttributeValue element of a different type than the one provided
in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
GE : Greater than or equal.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
GT : Greater than.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
NOT_NULL : The attribute exists. NOT_NULL is
supported for all datatypes, including lists and maps.
This operator tests for the existence of an attribute, not its data type.
If the data type of attribute "a" is null, and you evaluate
it using NOT_NULL, the result is a Boolean true. This
result is because the attribute "a" exists; its data type is
not relevant to the NOT_NULL comparison operator.
NULL : The attribute does not exist. NULL is
supported for all datatypes, including lists and maps.
This operator tests for the nonexistence of an attribute, not its data
type. If the data type of attribute "a" is null, and you
evaluate it using NULL, the result is a Boolean
false. This is because the attribute "a" exists; its
data type is not relevant to the NULL comparison operator.
CONTAINS : Checks for a subsequence, or value in a set.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If the target
attribute of the comparison is of type String, then the operator checks
for a substring match. If the target attribute of the comparison is of
type Binary, then the operator looks for a subsequence of the target that
matches the input. If the target attribute of the comparison is a set ("
SS", "NS", or "BS"), then the
operator evaluates to true if it finds an exact match with any member of
the set.
CONTAINS is supported for lists: When evaluating "
a CONTAINS b", "a" can be a list; however, "
b" cannot be a set, a map, or a list.
NOT_CONTAINS : Checks for absence of a subsequence, or
absence of a value in a set.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If the target
attribute of the comparison is a String, then the operator checks for the
absence of a substring match. If the target attribute of the comparison
is Binary, then the operator checks for the absence of a subsequence of
the target that matches the input. If the target attribute of the
comparison is a set ("SS", "NS", or "
BS"), then the operator evaluates to true if it does
not find an exact match with any member of the set.
NOT_CONTAINS is supported for lists: When evaluating "
a NOT CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a map, or a
list.
BEGINS_WITH : Checks for a prefix.
AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
IN : Checks for matching elements within two sets.
AttributeValueList can contain one or more AttributeValue elements of type String, Number, or Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any elements of the input set are present in the item attribute, the expression evaluates to true.
BETWEEN : Greater than or equal to the first value, and less
than or equal to the second value.
AttributeValueList must contain two AttributeValue elements
of the same type, either String, Number, or Binary (not a set type). A
target attribute matches if the target value is greater than, or equal
to, the first element and less than, or equal to, the second element. If
an item contains an AttributeValue element of a different type
than the one provided in the request, the value does not match. For
example, {"S":"6"} does not compare to
{"N":"6"}. Also, {"N":"6"} does not compare to
{"NS":["6", "2", "1"]}
For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of AttributeValueList and ComparisonOperator:
Value - A value for DynamoDB to compare with an attribute.
Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional operation:
If Exists is true, DynamoDB will check to see if that
attribute value already exists in the table. If it is found, then the
condition evaluates to true; otherwise the condition evaluate to false.
If Exists is false, DynamoDB assumes that the
attribute value does not exist in the table. If in fact the value
does not exist, then the assumption is valid and the condition evaluates
to true. If the value is found, despite the assumption that it does not
exist, the condition evaluates to false.
Note that the default value for Exists is true.
The Value and Exists parameters are incompatible with AttributeValueList and ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a ValidationException exception.
This parameter does not support attributes of type List or Map.
expected - This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A map of attribute/condition pairs. Expected provides a conditional block for the UpdateItem operation.
Each element of Expected consists of an attribute name, a comparison operator, and one or more values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each Expected element, the result of the evaluation is either true or false.
If you specify more than one element in the Expected map, then by default all of the conditions must evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to true, rather than all of them.)
If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
Expected contains the following:
AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values in the list depends on the ComparisonOperator being used.
For type Number, value comparisons are numeric.
String value comparisons for greater than, equals, or less than
are based on ASCII character code values. For example,
a is greater than A, and a
is greater than B. For a list of code values, see http
://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When performing the comparison, DynamoDB uses strongly consistent reads.
The following comparison operators are available:
EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
The following are descriptions of each comparison operator.
EQ : Equal. EQ is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one
AttributeValue element of type String, Number, Binary,
String Set, Number Set, or Binary Set. If an item contains an
AttributeValue element of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
NE : Not equal. NE is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one
AttributeValue of type String, Number, Binary, String Set,
Number Set, or Binary Set. If an item contains an
AttributeValue of a different type than the one provided in
the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
LE : Less than or equal.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"} does
not equal {"N":"6"}. Also, {"N":"6"}
does not compare to {"NS":["6", "2", "1"]}.
LT : Less than.
AttributeValueList can contain only one
AttributeValue of type String, Number, or Binary (not a set
type). If an item contains an AttributeValue element of a
different type than the one provided in the request, the value
does not match. For example, {"S":"6"} does not equal
{"N":"6"}. Also, {"N":"6"} does not
compare to {"NS":["6", "2", "1"]}.
GE : Greater than or equal.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"} does
not equal {"N":"6"}. Also, {"N":"6"}
does not compare to {"NS":["6", "2", "1"]}.
GT : Greater than.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"} does
not equal {"N":"6"}. Also, {"N":"6"}
does not compare to {"NS":["6", "2", "1"]}.
NOT_NULL : The attribute exists.
NOT_NULL is supported for all datatypes, including
lists and maps.
This operator tests for the existence of an attribute, not its
data type. If the data type of attribute "a" is null,
and you evaluate it using NOT_NULL, the result is a
Boolean true. This result is because the attribute "
a" exists; its data type is not relevant to the
NOT_NULL comparison operator.
NULL : The attribute does not exist.
NULL is supported for all datatypes, including lists
and maps.
This operator tests for the nonexistence of an attribute, not its
data type. If the data type of attribute "a" is null,
and you evaluate it using NULL, the result is a
Boolean false. This is because the attribute "
a" exists; its data type is not relevant to the
NULL comparison operator.
CONTAINS : Checks for a subsequence, or value in a
set.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If the target attribute of the comparison is of
type String, then the operator checks for a substring match. If
the target attribute of the comparison is of type Binary, then the
operator looks for a subsequence of the target that matches the
input. If the target attribute of the comparison is a set ("
SS", "NS", or "BS"), then
the operator evaluates to true if it finds an exact match with any
member of the set.
CONTAINS is supported for lists: When evaluating "
a CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a map,
or a list.
NOT_CONTAINS : Checks for absence of a subsequence,
or absence of a value in a set.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If the target attribute of the comparison is a
String, then the operator checks for the absence of a substring
match. If the target attribute of the comparison is Binary, then
the operator checks for the absence of a subsequence of the target
that matches the input. If the target attribute of the comparison
is a set ("SS", "NS", or "
BS"), then the operator evaluates to true if it
does not find an exact match with any member of the set.
NOT_CONTAINS is supported for lists: When evaluating "
a NOT CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a map,
or a list.
BEGINS_WITH : Checks for a prefix.
AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
IN : Checks for matching elements within two sets.
AttributeValueList can contain one or more AttributeValue elements of type String, Number, or Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any elements of the input set are present in the item attribute, the expression evaluates to true.
BETWEEN : Greater than or equal to the first value,
and less than or equal to the second value.
AttributeValueList must contain two AttributeValue
elements of the same type, either String, Number, or Binary (not a
set type). A target attribute matches if the target value is
greater than, or equal to, the first element and less than, or
equal to, the second element. If an item contains an
AttributeValue element of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not compare to {"N":"6"}.
Also, {"N":"6"} does not compare to
{"NS":["6", "2", "1"]}
For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of AttributeValueList and ComparisonOperator:
Value - A value for DynamoDB to compare with an attribute.
Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional operation:
If Exists is true, DynamoDB will check to see
if that attribute value already exists in the table. If it is
found, then the condition evaluates to true; otherwise the
condition evaluate to false.
If Exists is false, DynamoDB assumes that the
attribute value does not exist in the table. If in fact the
value does not exist, then the assumption is valid and the
condition evaluates to true. If the value is found, despite the
assumption that it does not exist, the condition evaluates to
false.
Note that the default value for Exists is true
.
The Value and Exists parameters are incompatible with AttributeValueList and ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a ValidationException exception.
This parameter does not support attributes of type List or Map.
public UpdateItemRequest withExpected(Map<String,ExpectedAttributeValue> expected)
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A map of attribute/condition pairs. Expected provides a conditional block for the UpdateItem operation.
Each element of Expected consists of an attribute name, a comparison operator, and one or more values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each Expected element, the result of the evaluation is either true or false.
If you specify more than one element in the Expected map, then by default all of the conditions must evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to true, rather than all of them.)
If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
Expected contains the following:
AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values in the list depends on the ComparisonOperator being used.
For type Number, value comparisons are numeric.
String value comparisons for greater than, equals, or less than are based
on ASCII character code values. For example, a is greater
than A, and a is greater than B.
For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When performing the comparison, DynamoDB uses strongly consistent reads.
The following comparison operators are available:
EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
The following are descriptions of each comparison operator.
EQ : Equal. EQ is supported for all datatypes,
including lists and maps.
AttributeValueList can contain only one AttributeValue
element of type String, Number, Binary, String Set, Number Set, or Binary
Set. If an item contains an AttributeValue element of a different
type than the one provided in the request, the value does not match. For
example, {"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
NE : Not equal. NE is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one AttributeValue of
type String, Number, Binary, String Set, Number Set, or Binary Set. If an
item contains an AttributeValue of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not equal {"NS":["6", "2", "1"]}
.
LE : Less than or equal.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
LT : Less than.
AttributeValueList can contain only one AttributeValue of
type String, Number, or Binary (not a set type). If an item contains an
AttributeValue element of a different type than the one provided
in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
GE : Greater than or equal.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
GT : Greater than.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If an item
contains an AttributeValue element of a different type than the
one provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}. Also,
{"N":"6"} does not compare to
{"NS":["6", "2", "1"]}.
NOT_NULL : The attribute exists. NOT_NULL is
supported for all datatypes, including lists and maps.
This operator tests for the existence of an attribute, not its data type.
If the data type of attribute "a" is null, and you evaluate
it using NOT_NULL, the result is a Boolean true. This
result is because the attribute "a" exists; its data type is
not relevant to the NOT_NULL comparison operator.
NULL : The attribute does not exist. NULL is
supported for all datatypes, including lists and maps.
This operator tests for the nonexistence of an attribute, not its data
type. If the data type of attribute "a" is null, and you
evaluate it using NULL, the result is a Boolean
false. This is because the attribute "a" exists; its
data type is not relevant to the NULL comparison operator.
CONTAINS : Checks for a subsequence, or value in a set.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If the target
attribute of the comparison is of type String, then the operator checks
for a substring match. If the target attribute of the comparison is of
type Binary, then the operator looks for a subsequence of the target that
matches the input. If the target attribute of the comparison is a set ("
SS", "NS", or "BS"), then the
operator evaluates to true if it finds an exact match with any member of
the set.
CONTAINS is supported for lists: When evaluating "
a CONTAINS b", "a" can be a list; however, "
b" cannot be a set, a map, or a list.
NOT_CONTAINS : Checks for absence of a subsequence, or
absence of a value in a set.
AttributeValueList can contain only one AttributeValue
element of type String, Number, or Binary (not a set type). If the target
attribute of the comparison is a String, then the operator checks for the
absence of a substring match. If the target attribute of the comparison
is Binary, then the operator checks for the absence of a subsequence of
the target that matches the input. If the target attribute of the
comparison is a set ("SS", "NS", or "
BS"), then the operator evaluates to true if it does
not find an exact match with any member of the set.
NOT_CONTAINS is supported for lists: When evaluating "
a NOT CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a map, or a
list.
BEGINS_WITH : Checks for a prefix.
AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
IN : Checks for matching elements within two sets.
AttributeValueList can contain one or more AttributeValue elements of type String, Number, or Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any elements of the input set are present in the item attribute, the expression evaluates to true.
BETWEEN : Greater than or equal to the first value, and less
than or equal to the second value.
AttributeValueList must contain two AttributeValue elements
of the same type, either String, Number, or Binary (not a set type). A
target attribute matches if the target value is greater than, or equal
to, the first element and less than, or equal to, the second element. If
an item contains an AttributeValue element of a different type
than the one provided in the request, the value does not match. For
example, {"S":"6"} does not compare to
{"N":"6"}. Also, {"N":"6"} does not compare to
{"NS":["6", "2", "1"]}
For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of AttributeValueList and ComparisonOperator:
Value - A value for DynamoDB to compare with an attribute.
Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional operation:
If Exists is true, DynamoDB will check to see if that
attribute value already exists in the table. If it is found, then the
condition evaluates to true; otherwise the condition evaluate to false.
If Exists is false, DynamoDB assumes that the
attribute value does not exist in the table. If in fact the value
does not exist, then the assumption is valid and the condition evaluates
to true. If the value is found, despite the assumption that it does not
exist, the condition evaluates to false.
Note that the default value for Exists is true.
The Value and Exists parameters are incompatible with AttributeValueList and ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a ValidationException exception.
This parameter does not support attributes of type List or Map.
expected - This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A map of attribute/condition pairs. Expected provides a conditional block for the UpdateItem operation.
Each element of Expected consists of an attribute name, a comparison operator, and one or more values. DynamoDB compares the attribute with the value(s) you supplied, using the comparison operator. For each Expected element, the result of the evaluation is either true or false.
If you specify more than one element in the Expected map, then by default all of the conditions must evaluate to true. In other words, the conditions are ANDed together. (You can use the ConditionalOperator parameter to OR the conditions instead. If you do this, then at least one of the conditions must evaluate to true, rather than all of them.)
If the Expected map evaluates to true, then the conditional operation succeeds; otherwise, it fails.
Expected contains the following:
AttributeValueList - One or more values to evaluate against the supplied attribute. The number of values in the list depends on the ComparisonOperator being used.
For type Number, value comparisons are numeric.
String value comparisons for greater than, equals, or less than
are based on ASCII character code values. For example,
a is greater than A, and a
is greater than B. For a list of code values, see http
://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
For type Binary, DynamoDB treats each byte of the binary data as unsigned when it compares binary values.
ComparisonOperator - A comparator for evaluating attributes in the AttributeValueList. When performing the comparison, DynamoDB uses strongly consistent reads.
The following comparison operators are available:
EQ | NE | LE | LT | GE | GT | NOT_NULL | NULL | CONTAINS | NOT_CONTAINS | BEGINS_WITH | IN | BETWEEN
The following are descriptions of each comparison operator.
EQ : Equal. EQ is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one
AttributeValue element of type String, Number, Binary,
String Set, Number Set, or Binary Set. If an item contains an
AttributeValue element of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
NE : Not equal. NE is supported for all
datatypes, including lists and maps.
AttributeValueList can contain only one
AttributeValue of type String, Number, Binary, String Set,
Number Set, or Binary Set. If an item contains an
AttributeValue of a different type than the one provided in
the request, the value does not match. For example,
{"S":"6"} does not equal {"N":"6"}.
Also, {"N":"6"} does not equal
{"NS":["6", "2", "1"]}.
LE : Less than or equal.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"} does
not equal {"N":"6"}. Also, {"N":"6"}
does not compare to {"NS":["6", "2", "1"]}.
LT : Less than.
AttributeValueList can contain only one
AttributeValue of type String, Number, or Binary (not a set
type). If an item contains an AttributeValue element of a
different type than the one provided in the request, the value
does not match. For example, {"S":"6"} does not equal
{"N":"6"}. Also, {"N":"6"} does not
compare to {"NS":["6", "2", "1"]}.
GE : Greater than or equal.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"} does
not equal {"N":"6"}. Also, {"N":"6"}
does not compare to {"NS":["6", "2", "1"]}.
GT : Greater than.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If an item contains an AttributeValue
element of a different type than the one provided in the request,
the value does not match. For example, {"S":"6"} does
not equal {"N":"6"}. Also, {"N":"6"}
does not compare to {"NS":["6", "2", "1"]}.
NOT_NULL : The attribute exists.
NOT_NULL is supported for all datatypes, including
lists and maps.
This operator tests for the existence of an attribute, not its
data type. If the data type of attribute "a" is null,
and you evaluate it using NOT_NULL, the result is a
Boolean true. This result is because the attribute "
a" exists; its data type is not relevant to the
NOT_NULL comparison operator.
NULL : The attribute does not exist.
NULL is supported for all datatypes, including lists
and maps.
This operator tests for the nonexistence of an attribute, not its
data type. If the data type of attribute "a" is null,
and you evaluate it using NULL, the result is a
Boolean false. This is because the attribute "
a" exists; its data type is not relevant to the
NULL comparison operator.
CONTAINS : Checks for a subsequence, or value in a
set.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If the target attribute of the comparison is of
type String, then the operator checks for a substring match. If
the target attribute of the comparison is of type Binary, then the
operator looks for a subsequence of the target that matches the
input. If the target attribute of the comparison is a set ("
SS", "NS", or "BS"), then
the operator evaluates to true if it finds an exact match with any
member of the set.
CONTAINS is supported for lists: When evaluating "
a CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a map,
or a list.
NOT_CONTAINS : Checks for absence of a subsequence,
or absence of a value in a set.
AttributeValueList can contain only one
AttributeValue element of type String, Number, or Binary
(not a set type). If the target attribute of the comparison is a
String, then the operator checks for the absence of a substring
match. If the target attribute of the comparison is Binary, then
the operator checks for the absence of a subsequence of the target
that matches the input. If the target attribute of the comparison
is a set ("SS", "NS", or "
BS"), then the operator evaluates to true if it
does not find an exact match with any member of the set.
NOT_CONTAINS is supported for lists: When evaluating "
a NOT CONTAINS b", "a
" can be a list; however, "b" cannot be a set, a map,
or a list.
BEGINS_WITH : Checks for a prefix.
AttributeValueList can contain only one AttributeValue of type String or Binary (not a Number or a set type). The target attribute of the comparison must be of type String or Binary (not a Number or a set type).
IN : Checks for matching elements within two sets.
AttributeValueList can contain one or more AttributeValue elements of type String, Number, or Binary (not a set type). These attributes are compared against an existing set type attribute of an item. If any elements of the input set are present in the item attribute, the expression evaluates to true.
BETWEEN : Greater than or equal to the first value,
and less than or equal to the second value.
AttributeValueList must contain two AttributeValue
elements of the same type, either String, Number, or Binary (not a
set type). A target attribute matches if the target value is
greater than, or equal to, the first element and less than, or
equal to, the second element. If an item contains an
AttributeValue element of a different type than the one
provided in the request, the value does not match. For example,
{"S":"6"} does not compare to {"N":"6"}.
Also, {"N":"6"} does not compare to
{"NS":["6", "2", "1"]}
For usage examples of AttributeValueList and ComparisonOperator, see Legacy Conditional Parameters in the Amazon DynamoDB Developer Guide.
For backward compatibility with previous DynamoDB releases, the following parameters can be used instead of AttributeValueList and ComparisonOperator:
Value - A value for DynamoDB to compare with an attribute.
Exists - A Boolean value that causes DynamoDB to evaluate the value before attempting the conditional operation:
If Exists is true, DynamoDB will check to see
if that attribute value already exists in the table. If it is
found, then the condition evaluates to true; otherwise the
condition evaluate to false.
If Exists is false, DynamoDB assumes that the
attribute value does not exist in the table. If in fact the
value does not exist, then the assumption is valid and the
condition evaluates to true. If the value is found, despite the
assumption that it does not exist, the condition evaluates to
false.
Note that the default value for Exists is true
.
The Value and Exists parameters are incompatible with AttributeValueList and ComparisonOperator. Note that if you use both sets of parameters at once, DynamoDB will return a ValidationException exception.
This parameter does not support attributes of type List or Map.
public UpdateItemRequest addExpectedEntry(String key, ExpectedAttributeValue value)
public UpdateItemRequest clearExpectedEntries()
public void setConditionalOperator(String conditionalOperator)
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then the
entire map evaluates to true.
OR - If at least one of the conditions evaluate to true,
then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is the
default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
conditionalOperator - This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then
the entire map evaluates to true.
OR - If at least one of the conditions evaluate to
true, then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is
the default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
ConditionalOperatorpublic String getConditionalOperator()
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then the
entire map evaluates to true.
OR - If at least one of the conditions evaluate to true,
then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is the
default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true,
then the entire map evaluates to true.
OR - If at least one of the conditions evaluate to
true, then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is
the default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
ConditionalOperatorpublic UpdateItemRequest withConditionalOperator(String conditionalOperator)
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then the
entire map evaluates to true.
OR - If at least one of the conditions evaluate to true,
then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is the
default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
conditionalOperator - This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then
the entire map evaluates to true.
OR - If at least one of the conditions evaluate to
true, then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is
the default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
ConditionalOperatorpublic void setConditionalOperator(ConditionalOperator conditionalOperator)
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then the
entire map evaluates to true.
OR - If at least one of the conditions evaluate to true,
then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is the
default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
conditionalOperator - This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then
the entire map evaluates to true.
OR - If at least one of the conditions evaluate to
true, then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is
the default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
ConditionalOperatorpublic UpdateItemRequest withConditionalOperator(ConditionalOperator conditionalOperator)
This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then the
entire map evaluates to true.
OR - If at least one of the conditions evaluate to true,
then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is the
default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
conditionalOperator - This is a legacy parameter, for backward compatibility. New applications should use ConditionExpression instead. Do not combine legacy parameters and expression parameters in a single API call; otherwise, DynamoDB will return a ValidationException exception.
A logical operator to apply to the conditions in the Expected map:
AND - If all of the conditions evaluate to true, then
the entire map evaluates to true.
OR - If at least one of the conditions evaluate to
true, then the entire map evaluates to true.
If you omit ConditionalOperator, then AND is
the default.
The operation will succeed only if the entire map evaluates to true.
This parameter does not support attributes of type List or Map.
ConditionalOperatorpublic void setReturnValues(String returnValues)
Use ReturnValues if you want to get the item attributes as they appeared either before or after they were updated. For UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if its
value is NONE, then nothing is returned. (This setting is
the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of the
item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
returnValues - Use ReturnValues if you want to get the item attributes as
they appeared either before or after they were updated. For
UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if
its value is NONE, then nothing is returned. (This
setting is the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of
the item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
ReturnValuepublic String getReturnValues()
Use ReturnValues if you want to get the item attributes as they appeared either before or after they were updated. For UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if its
value is NONE, then nothing is returned. (This setting is
the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of the
item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
NONE - If ReturnValues is not specified, or
if its value is NONE, then nothing is returned.
(This setting is the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an
attribute name-value pair, then the content of the old item is
returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version
of the item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
ReturnValuepublic UpdateItemRequest withReturnValues(String returnValues)
Use ReturnValues if you want to get the item attributes as they appeared either before or after they were updated. For UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if its
value is NONE, then nothing is returned. (This setting is
the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of the
item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
returnValues - Use ReturnValues if you want to get the item attributes as
they appeared either before or after they were updated. For
UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if
its value is NONE, then nothing is returned. (This
setting is the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of
the item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
ReturnValuepublic void setReturnValues(ReturnValue returnValues)
Use ReturnValues if you want to get the item attributes as they appeared either before or after they were updated. For UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if its
value is NONE, then nothing is returned. (This setting is
the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of the
item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
returnValues - Use ReturnValues if you want to get the item attributes as
they appeared either before or after they were updated. For
UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if
its value is NONE, then nothing is returned. (This
setting is the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of
the item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
ReturnValuepublic UpdateItemRequest withReturnValues(ReturnValue returnValues)
Use ReturnValues if you want to get the item attributes as they appeared either before or after they were updated. For UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if its
value is NONE, then nothing is returned. (This setting is
the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of the
item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
returnValues - Use ReturnValues if you want to get the item attributes as
they appeared either before or after they were updated. For
UpdateItem, the valid values are:
NONE - If ReturnValues is not specified, or if
its value is NONE, then nothing is returned. (This
setting is the default for ReturnValues.)
ALL_OLD - If UpdateItem overwrote an attribute
name-value pair, then the content of the old item is returned.
UPDATED_OLD - The old versions of only the updated
attributes are returned.
ALL_NEW - All of the attributes of the new version of
the item are returned.
UPDATED_NEW - The new versions of only the updated
attributes are returned.
ReturnValuepublic void setReturnConsumedCapacity(String returnConsumedCapacity)
returnConsumedCapacity - The new value for the ReturnConsumedCapacity property for this
object.ReturnConsumedCapacitypublic String getReturnConsumedCapacity()
ReturnConsumedCapacitypublic UpdateItemRequest withReturnConsumedCapacity(String returnConsumedCapacity)
returnConsumedCapacity - The new value for the ReturnConsumedCapacity property for this
object.ReturnConsumedCapacitypublic void setReturnConsumedCapacity(ReturnConsumedCapacity returnConsumedCapacity)
returnConsumedCapacity - The new value for the ReturnConsumedCapacity property for this
object.ReturnConsumedCapacitypublic UpdateItemRequest withReturnConsumedCapacity(ReturnConsumedCapacity returnConsumedCapacity)
returnConsumedCapacity - The new value for the ReturnConsumedCapacity property for this
object.ReturnConsumedCapacitypublic void setReturnItemCollectionMetrics(String returnItemCollectionMetrics)
Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are returned
in the response. If set to NONE (the default), no statistics
are returned.
returnItemCollectionMetrics - Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are
returned in the response. If set to NONE (the
default), no statistics are returned.ReturnItemCollectionMetricspublic String getReturnItemCollectionMetrics()
Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are returned
in the response. If set to NONE (the default), no statistics
are returned.
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are
returned in the response. If set to NONE (the
default), no statistics are returned.ReturnItemCollectionMetricspublic UpdateItemRequest withReturnItemCollectionMetrics(String returnItemCollectionMetrics)
Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are returned
in the response. If set to NONE (the default), no statistics
are returned.
returnItemCollectionMetrics - Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are
returned in the response. If set to NONE (the
default), no statistics are returned.ReturnItemCollectionMetricspublic void setReturnItemCollectionMetrics(ReturnItemCollectionMetrics returnItemCollectionMetrics)
Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are returned
in the response. If set to NONE (the default), no statistics
are returned.
returnItemCollectionMetrics - Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are
returned in the response. If set to NONE (the
default), no statistics are returned.ReturnItemCollectionMetricspublic UpdateItemRequest withReturnItemCollectionMetrics(ReturnItemCollectionMetrics returnItemCollectionMetrics)
Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are returned
in the response. If set to NONE (the default), no statistics
are returned.
returnItemCollectionMetrics - Determines whether item collection metrics are returned. If set to
SIZE, the response includes statistics about item
collections, if any, that were modified during the operation are
returned in the response. If set to NONE (the
default), no statistics are returned.ReturnItemCollectionMetricspublic void setUpdateExpression(String updateExpression)
An expression that defines one or more attributes to be updated, the action to be performed on them, and new value(s) for them.
The following action values are available for UpdateExpression.
SET - Adds one or more attributes and values to an item. If
any of these attribute already exist, they are replaced by the new
values. You can also use SET to add or subtract from an
attribute that is of type Number. For example:
SET myNum = myNum + :val
SET supports the following functions:
if_not_exists (path, operand) - if the item does not contain
an attribute at the specified path, then if_not_exists
evaluates to operand; otherwise, it evaluates to path. You can use this
function to avoid overwriting an attribute that may already be present in
the item.
list_append (operand, operand) - evaluates to a list with a
new element added to it. You can append the new element to the start or
the end of the list by reversing the order of the operands.
These function names are case-sensitive.
REMOVE - Removes one or more attributes from an item.
ADD - Adds the specified value to the item, if the attribute
does not already exist. If the attribute does exist, then the behavior of
ADD depends on the data type of the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number value for
an item that doesn't exist before the update, DynamoDB uses
0 as the initial value.
Similarly, if you use ADD for an existing item to increment
or decrement an attribute value that doesn't exist before the update,
DynamoDB uses 0 as the initial value. For example, suppose
that the item you want to update doesn't have an attribute named
itemcount, but you decide to ADD the number
3 to this attribute anyway. DynamoDB will create the
itemcount attribute, set its initial value to 0, and
finally add 3 to it. The result will be a new
itemcount attribute in the item, with a value of 3.
If the existing data type is a set and if Value is also a set,
then Value is added to the existing set. For example, if the
attribute value is the set [1,2], and the ADD
action specified [3], then the final attribute value is
[1,2,3]. An error occurs if an ADD action is
specified for a set attribute and the attribute type specified does not
match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.
The ADD action only supports Number and set data types. In
addition, ADD can only be used on top-level attributes, not
nested attributes.
DELETE - Deletes an element from a set.
If a set of values is specified, then those values are subtracted from
the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is [b].
Specifying an empty set is an error.
The DELETE action only supports set data types. In addition,
DELETE can only be used on top-level attributes, not nested
attributes.
You can have many actions in a single expression, such as the following:
SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.
UpdateExpression replaces the legacy AttributeUpdates parameter.
updateExpression - An expression that defines one or more attributes to be updated,
the action to be performed on them, and new value(s) for them.
The following action values are available for UpdateExpression.
SET - Adds one or more attributes and values to an
item. If any of these attribute already exist, they are replaced
by the new values. You can also use SET to add or
subtract from an attribute that is of type Number. For example:
SET myNum = myNum + :val
SET supports the following functions:
if_not_exists (path, operand) - if the item does not
contain an attribute at the specified path, then
if_not_exists evaluates to operand; otherwise, it
evaluates to path. You can use this function to avoid overwriting
an attribute that may already be present in the item.
list_append (operand, operand) - evaluates to a list
with a new element added to it. You can append the new element to
the start or the end of the list by reversing the order of the
operands.
These function names are case-sensitive.
REMOVE - Removes one or more attributes from an item.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute in the item, with a value of 3.
If the existing data type is a set and if Value is also a
set, then Value is added to the existing set. For example,
if the attribute value is the set [1,2], and the
ADD action specified [3], then the final
attribute value is [1,2,3]. An error occurs if an
ADD action is specified for a set attribute and the
attribute type specified does not match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.
The ADD action only supports Number and set data
types. In addition, ADD can only be used on top-level
attributes, not nested attributes.
DELETE - Deletes an element from a set.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
The DELETE action only supports set data types. In
addition, DELETE can only be used on top-level
attributes, not nested attributes.
You can have many actions in a single expression, such as the
following:
SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.
UpdateExpression replaces the legacy AttributeUpdates parameter.
public String getUpdateExpression()
An expression that defines one or more attributes to be updated, the action to be performed on them, and new value(s) for them.
The following action values are available for UpdateExpression.
SET - Adds one or more attributes and values to an item. If
any of these attribute already exist, they are replaced by the new
values. You can also use SET to add or subtract from an
attribute that is of type Number. For example:
SET myNum = myNum + :val
SET supports the following functions:
if_not_exists (path, operand) - if the item does not contain
an attribute at the specified path, then if_not_exists
evaluates to operand; otherwise, it evaluates to path. You can use this
function to avoid overwriting an attribute that may already be present in
the item.
list_append (operand, operand) - evaluates to a list with a
new element added to it. You can append the new element to the start or
the end of the list by reversing the order of the operands.
These function names are case-sensitive.
REMOVE - Removes one or more attributes from an item.
ADD - Adds the specified value to the item, if the attribute
does not already exist. If the attribute does exist, then the behavior of
ADD depends on the data type of the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number value for
an item that doesn't exist before the update, DynamoDB uses
0 as the initial value.
Similarly, if you use ADD for an existing item to increment
or decrement an attribute value that doesn't exist before the update,
DynamoDB uses 0 as the initial value. For example, suppose
that the item you want to update doesn't have an attribute named
itemcount, but you decide to ADD the number
3 to this attribute anyway. DynamoDB will create the
itemcount attribute, set its initial value to 0, and
finally add 3 to it. The result will be a new
itemcount attribute in the item, with a value of 3.
If the existing data type is a set and if Value is also a set,
then Value is added to the existing set. For example, if the
attribute value is the set [1,2], and the ADD
action specified [3], then the final attribute value is
[1,2,3]. An error occurs if an ADD action is
specified for a set attribute and the attribute type specified does not
match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.
The ADD action only supports Number and set data types. In
addition, ADD can only be used on top-level attributes, not
nested attributes.
DELETE - Deletes an element from a set.
If a set of values is specified, then those values are subtracted from
the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is [b].
Specifying an empty set is an error.
The DELETE action only supports set data types. In addition,
DELETE can only be used on top-level attributes, not nested
attributes.
You can have many actions in a single expression, such as the following:
SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.
UpdateExpression replaces the legacy AttributeUpdates parameter.
The following action values are available for UpdateExpression.
SET - Adds one or more attributes and values to an
item. If any of these attribute already exist, they are replaced
by the new values. You can also use SET to add or
subtract from an attribute that is of type Number. For example:
SET myNum = myNum + :val
SET supports the following functions:
if_not_exists (path, operand) - if the item does not
contain an attribute at the specified path, then
if_not_exists evaluates to operand; otherwise, it
evaluates to path. You can use this function to avoid overwriting
an attribute that may already be present in the item.
list_append (operand, operand) - evaluates to a list
with a new element added to it. You can append the new element to
the start or the end of the list by reversing the order of the
operands.
These function names are case-sensitive.
REMOVE - Removes one or more attributes from an
item.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute in the item, with a value of 3.
If the existing data type is a set and if Value is also a
set, then Value is added to the existing set. For example,
if the attribute value is the set [1,2], and the
ADD action specified [3], then the
final attribute value is [1,2,3]. An error occurs if
an ADD action is specified for a set attribute and
the attribute type specified does not match the existing set
type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.
The ADD action only supports Number and set data
types. In addition, ADD can only be used on
top-level attributes, not nested attributes.
DELETE - Deletes an element from a set.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
The DELETE action only supports set data types. In
addition, DELETE can only be used on top-level
attributes, not nested attributes.
You can have many actions in a single expression, such as the
following:
SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.
UpdateExpression replaces the legacy AttributeUpdates parameter.
public UpdateItemRequest withUpdateExpression(String updateExpression)
An expression that defines one or more attributes to be updated, the action to be performed on them, and new value(s) for them.
The following action values are available for UpdateExpression.
SET - Adds one or more attributes and values to an item. If
any of these attribute already exist, they are replaced by the new
values. You can also use SET to add or subtract from an
attribute that is of type Number. For example:
SET myNum = myNum + :val
SET supports the following functions:
if_not_exists (path, operand) - if the item does not contain
an attribute at the specified path, then if_not_exists
evaluates to operand; otherwise, it evaluates to path. You can use this
function to avoid overwriting an attribute that may already be present in
the item.
list_append (operand, operand) - evaluates to a list with a
new element added to it. You can append the new element to the start or
the end of the list by reversing the order of the operands.
These function names are case-sensitive.
REMOVE - Removes one or more attributes from an item.
ADD - Adds the specified value to the item, if the attribute
does not already exist. If the attribute does exist, then the behavior of
ADD depends on the data type of the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number value for
an item that doesn't exist before the update, DynamoDB uses
0 as the initial value.
Similarly, if you use ADD for an existing item to increment
or decrement an attribute value that doesn't exist before the update,
DynamoDB uses 0 as the initial value. For example, suppose
that the item you want to update doesn't have an attribute named
itemcount, but you decide to ADD the number
3 to this attribute anyway. DynamoDB will create the
itemcount attribute, set its initial value to 0, and
finally add 3 to it. The result will be a new
itemcount attribute in the item, with a value of 3.
If the existing data type is a set and if Value is also a set,
then Value is added to the existing set. For example, if the
attribute value is the set [1,2], and the ADD
action specified [3], then the final attribute value is
[1,2,3]. An error occurs if an ADD action is
specified for a set attribute and the attribute type specified does not
match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.
The ADD action only supports Number and set data types. In
addition, ADD can only be used on top-level attributes, not
nested attributes.
DELETE - Deletes an element from a set.
If a set of values is specified, then those values are subtracted from
the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is [b].
Specifying an empty set is an error.
The DELETE action only supports set data types. In addition,
DELETE can only be used on top-level attributes, not nested
attributes.
You can have many actions in a single expression, such as the following:
SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.
UpdateExpression replaces the legacy AttributeUpdates parameter.
updateExpression - An expression that defines one or more attributes to be updated,
the action to be performed on them, and new value(s) for them.
The following action values are available for UpdateExpression.
SET - Adds one or more attributes and values to an
item. If any of these attribute already exist, they are replaced
by the new values. You can also use SET to add or
subtract from an attribute that is of type Number. For example:
SET myNum = myNum + :val
SET supports the following functions:
if_not_exists (path, operand) - if the item does not
contain an attribute at the specified path, then
if_not_exists evaluates to operand; otherwise, it
evaluates to path. You can use this function to avoid overwriting
an attribute that may already be present in the item.
list_append (operand, operand) - evaluates to a list
with a new element added to it. You can append the new element to
the start or the end of the list by reversing the order of the
operands.
These function names are case-sensitive.
REMOVE - Removes one or more attributes from an item.
ADD - Adds the specified value to the item, if the
attribute does not already exist. If the attribute does exist,
then the behavior of ADD depends on the data type of
the attribute:
If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.
If you use ADD to increment or decrement a number
value for an item that doesn't exist before the update, DynamoDB
uses 0 as the initial value.
Similarly, if you use ADD for an existing item to
increment or decrement an attribute value that doesn't exist
before the update, DynamoDB uses 0 as the initial
value. For example, suppose that the item you want to update
doesn't have an attribute named itemcount, but you decide
to ADD the number 3 to this attribute
anyway. DynamoDB will create the itemcount attribute, set
its initial value to 0, and finally add
3 to it. The result will be a new itemcount
attribute in the item, with a value of 3.
If the existing data type is a set and if Value is also a
set, then Value is added to the existing set. For example,
if the attribute value is the set [1,2], and the
ADD action specified [3], then the final
attribute value is [1,2,3]. An error occurs if an
ADD action is specified for a set attribute and the
attribute type specified does not match the existing set type.
Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.
The ADD action only supports Number and set data
types. In addition, ADD can only be used on top-level
attributes, not nested attributes.
DELETE - Deletes an element from a set.
If a set of values is specified, then those values are subtracted
from the old set. For example, if the attribute value was the set
[a,b,c] and the DELETE action specifies
[a,c], then the final attribute value is
[b]. Specifying an empty set is an error.
The DELETE action only supports set data types. In
addition, DELETE can only be used on top-level
attributes, not nested attributes.
You can have many actions in a single expression, such as the
following:
SET a=:value1, b=:value2 DELETE :value3, :value4, :value5
For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.
UpdateExpression replaces the legacy AttributeUpdates parameter.
public void setConditionExpression(String conditionExpression)
A condition that must be satisfied in order for a conditional update to succeed.
An expression can contain any of the following:
Functions:
attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
These function names are case-sensitive.
Comparison operators:
= | <> | < | > | <= | >= | BETWEEN | IN
Logical operators: AND | OR | NOT
For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
conditionExpression - A condition that must be satisfied in order for a conditional
update to succeed.
An expression can contain any of the following:
Functions:
attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
These function names are case-sensitive.
Comparison operators:
= | <> | < | > | <= | >= | BETWEEN | IN
Logical operators: AND | OR | NOT
For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
public String getConditionExpression()
A condition that must be satisfied in order for a conditional update to succeed.
An expression can contain any of the following:
Functions:
attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
These function names are case-sensitive.
Comparison operators:
= | <> | < | > | <= | >= | BETWEEN | IN
Logical operators: AND | OR | NOT
For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
An expression can contain any of the following:
Functions:
attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
These function names are case-sensitive.
Comparison operators:
= | <> | < | > | <= | >= | BETWEEN | IN
Logical operators: AND | OR | NOT
For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
public UpdateItemRequest withConditionExpression(String conditionExpression)
A condition that must be satisfied in order for a conditional update to succeed.
An expression can contain any of the following:
Functions:
attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
These function names are case-sensitive.
Comparison operators:
= | <> | < | > | <= | >= | BETWEEN | IN
Logical operators: AND | OR | NOT
For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
conditionExpression - A condition that must be satisfied in order for a conditional
update to succeed.
An expression can contain any of the following:
Functions:
attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size
These function names are case-sensitive.
Comparison operators:
= | <> | < | > | <= | >= | BETWEEN | IN
Logical operators: AND | OR | NOT
For more information on condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
ConditionExpression replaces the legacy ConditionalOperator and Expected parameters.
public Map<String,String> getExpressionAttributeNames()
One or more substitution tokens for attribute names in an expression. The following are some use cases for using ExpressionAttributeNames:
To access an attribute whose name conflicts with a DynamoDB reserved word.
To create a placeholder for repeating occurrences of an attribute name in an expression.
To prevent special characters in an attribute name from being misinterpreted in an expression.
Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:
Percentile
The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for ExpressionAttributeNames:
{"#P":"Percentile"}
You could then use this substitution in an expression, as in this example:
#P = :val
Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.
For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
To access an attribute whose name conflicts with a DynamoDB reserved word.
To create a placeholder for repeating occurrences of an attribute name in an expression.
To prevent special characters in an attribute name from being misinterpreted in an expression.
Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:
Percentile
The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for ExpressionAttributeNames:
{"#P":"Percentile"}
You could then use this substitution in an expression, as in this example:
#P = :val
Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.
For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
public void setExpressionAttributeNames(Map<String,String> expressionAttributeNames)
One or more substitution tokens for attribute names in an expression. The following are some use cases for using ExpressionAttributeNames:
To access an attribute whose name conflicts with a DynamoDB reserved word.
To create a placeholder for repeating occurrences of an attribute name in an expression.
To prevent special characters in an attribute name from being misinterpreted in an expression.
Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:
Percentile
The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for ExpressionAttributeNames:
{"#P":"Percentile"}
You could then use this substitution in an expression, as in this example:
#P = :val
Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.
For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
expressionAttributeNames - One or more substitution tokens for attribute names in an
expression. The following are some use cases for using
ExpressionAttributeNames:
To access an attribute whose name conflicts with a DynamoDB reserved word.
To create a placeholder for repeating occurrences of an attribute name in an expression.
To prevent special characters in an attribute name from being misinterpreted in an expression.
Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:
Percentile
The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for ExpressionAttributeNames:
{"#P":"Percentile"}
You could then use this substitution in an expression, as in this example:
#P = :val
Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.
For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
public UpdateItemRequest withExpressionAttributeNames(Map<String,String> expressionAttributeNames)
One or more substitution tokens for attribute names in an expression. The following are some use cases for using ExpressionAttributeNames:
To access an attribute whose name conflicts with a DynamoDB reserved word.
To create a placeholder for repeating occurrences of an attribute name in an expression.
To prevent special characters in an attribute name from being misinterpreted in an expression.
Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:
Percentile
The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for ExpressionAttributeNames:
{"#P":"Percentile"}
You could then use this substitution in an expression, as in this example:
#P = :val
Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.
For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
expressionAttributeNames - One or more substitution tokens for attribute names in an
expression. The following are some use cases for using
ExpressionAttributeNames:
To access an attribute whose name conflicts with a DynamoDB reserved word.
To create a placeholder for repeating occurrences of an attribute name in an expression.
To prevent special characters in an attribute name from being misinterpreted in an expression.
Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:
Percentile
The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for ExpressionAttributeNames:
{"#P":"Percentile"}
You could then use this substitution in an expression, as in this example:
#P = :val
Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.
For more information on expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.
public UpdateItemRequest addExpressionAttributeNamesEntry(String key, String value)
public UpdateItemRequest clearExpressionAttributeNamesEntries()
public Map<String,AttributeValue> getExpressionAttributeValues()
One or more values that can be substituted in an expression.
Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:
Available | Backordered | Discontinued
You would first need to specify ExpressionAttributeValues as follows:
{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
You could then use these values in an expression, such as this:
ProductStatus IN (:avail, :back, :disc)
For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:
Available | Backordered | Discontinued
You would first need to specify ExpressionAttributeValues as follows:
{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
You could then use these values in an expression, such as this:
ProductStatus IN (:avail, :back, :disc)
For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
public void setExpressionAttributeValues(Map<String,AttributeValue> expressionAttributeValues)
One or more values that can be substituted in an expression.
Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:
Available | Backordered | Discontinued
You would first need to specify ExpressionAttributeValues as follows:
{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
You could then use these values in an expression, such as this:
ProductStatus IN (:avail, :back, :disc)
For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
expressionAttributeValues - One or more values that can be substituted in an expression.
Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:
Available | Backordered | Discontinued
You would first need to specify ExpressionAttributeValues as follows:
{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
You could then use these values in an expression, such as this:
ProductStatus IN (:avail, :back, :disc)
For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
public UpdateItemRequest withExpressionAttributeValues(Map<String,AttributeValue> expressionAttributeValues)
One or more values that can be substituted in an expression.
Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:
Available | Backordered | Discontinued
You would first need to specify ExpressionAttributeValues as follows:
{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
You could then use these values in an expression, such as this:
ProductStatus IN (:avail, :back, :disc)
For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
expressionAttributeValues - One or more values that can be substituted in an expression.
Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:
Available | Backordered | Discontinued
You would first need to specify ExpressionAttributeValues as follows:
{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }
You could then use these values in an expression, such as this:
ProductStatus IN (:avail, :back, :disc)
For more information on expression attribute values, see Specifying Conditions in the Amazon DynamoDB Developer Guide.
public UpdateItemRequest addExpressionAttributeValuesEntry(String key, AttributeValue value)
public UpdateItemRequest clearExpressionAttributeValuesEntries()
public void setKey(Map.Entry<String,AttributeValue> hashKey, Map.Entry<String,AttributeValue> rangeKey) throws IllegalArgumentException
For a hash-only table, you only need to provide the hash attribute. For a hash-and-range table, you must provide both.
hashKey - a map entry including the name and value of the primary hash key.rangeKey - a map entry including the name and value of the primary range key,
or null if it is a hash-only table.IllegalArgumentExceptionpublic UpdateItemRequest withKey(Map.Entry<String,AttributeValue> hashKey, Map.Entry<String,AttributeValue> rangeKey) throws IllegalArgumentException
For a hash-only table, you only need to provide the hash attribute. For a hash-and-range table, you must provide both.
Returns a reference to this object so that method calls can be chained together.
hashKey - a map entry including the name and value of the primary hash key.rangeKey - a map entry including the name and value of the primary range key,
or null if it is a hash-only table.IllegalArgumentExceptionpublic String toString()
toString in class ObjectObject.toString()public UpdateItemRequest clone()
clone in class AmazonWebServiceRequestCopyright © 2015. All rights reserved.