com.amazonaws.services.ecs.model

Class ListTasksRequest

java.lang.Object

com.amazonaws.AmazonWebServiceRequest

com.amazonaws.services.ecs.model.ListTasksRequest

All Implemented Interfaces:

HandlerContextAware, ReadLimitInfo, Serializable, Cloneable

@Generated(value="com.amazonaws:aws-java-sdk-code-generator")
public class ListTasksRequest
extends AmazonWebServiceRequest
implements Serializable, Cloneable

See Also:

AWS API Documentation, Serialized Form

Field Summary

Fields inherited from class com.amazonaws.AmazonWebServiceRequest

NOOP

Constructor Summary

Constructors

Constructor and Description
ListTasksRequest()

Method Summary

Modifier and Type	Method and Description
ListTasksRequest	clone()
boolean	equals(Object obj)
String	getCluster() The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list.
String	getContainerInstance() The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results.
String	getDesiredStatus() The task desired status with which to filter the ListTasks results.
String	getFamily() The name of the family with which to filter the ListTasks results.
Integer	getMaxResults() The maximum number of task results returned by ListTasks in paginated output.
String	getNextToken() The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter.
String	getServiceName() The name of the service with which to filter the ListTasks results.
String	getStartedBy() The startedBy value with which to filter the task results.
int	hashCode()
void	setCluster(String cluster) The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list.
void	setContainerInstance(String containerInstance) The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results.
void	setDesiredStatus(DesiredStatus desiredStatus) The task desired status with which to filter the ListTasks results.
void	setDesiredStatus(String desiredStatus) The task desired status with which to filter the ListTasks results.
void	setFamily(String family) The name of the family with which to filter the ListTasks results.
void	setMaxResults(Integer maxResults) The maximum number of task results returned by ListTasks in paginated output.
void	setNextToken(String nextToken) The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter.
void	setServiceName(String serviceName) The name of the service with which to filter the ListTasks results.
void	setStartedBy(String startedBy) The startedBy value with which to filter the task results.
String	toString() Returns a string representation of this object; useful for testing and debugging.
ListTasksRequest	withCluster(String cluster) The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list.
ListTasksRequest	withContainerInstance(String containerInstance) The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results.
ListTasksRequest	withDesiredStatus(DesiredStatus desiredStatus) The task desired status with which to filter the ListTasks results.
ListTasksRequest	withDesiredStatus(String desiredStatus) The task desired status with which to filter the ListTasks results.
ListTasksRequest	withFamily(String family) The name of the family with which to filter the ListTasks results.
ListTasksRequest	withMaxResults(Integer maxResults) The maximum number of task results returned by ListTasks in paginated output.
ListTasksRequest	withNextToken(String nextToken) The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter.
ListTasksRequest	withServiceName(String serviceName) The name of the service with which to filter the ListTasks results.
ListTasksRequest	withStartedBy(String startedBy) The startedBy value with which to filter the task results.

Methods inherited from class com.amazonaws.AmazonWebServiceRequest

addHandlerContext, copyBaseTo, getCloneRoot, getCloneSource, getCustomQueryParameters, getCustomRequestHeaders, getGeneralProgressListener, getHandlerContext, getReadLimit, getRequestClientOptions, getRequestCredentials, getRequestCredentialsProvider, getRequestMetricCollector, getSdkClientExecutionTimeout, getSdkRequestTimeout, putCustomQueryParameter, putCustomRequestHeader, setGeneralProgressListener, setRequestCredentials, setRequestCredentialsProvider, setRequestMetricCollector, setSdkClientExecutionTimeout, setSdkRequestTimeout, withGeneralProgressListener, withRequestCredentialsProvider, withRequestMetricCollector, withSdkClientExecutionTimeout, withSdkRequestTimeout

Methods inherited from class java.lang.Object

finalize, getClass, notify, notifyAll, wait, wait, wait

Constructor Detail

ListTasksRequest

public ListTasksRequest()

Method Detail

setCluster

public void setCluster(String cluster)

The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list. If you do not specify a cluster, the default cluster is assumed.

Parameters:

cluster - The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list. If you do not specify a cluster, the default cluster is assumed.

getCluster

public String getCluster()

The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list. If you do not specify a cluster, the default cluster is assumed.

Returns:

The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list. If you do not specify a cluster, the default cluster is assumed.

withCluster

public ListTasksRequest withCluster(String cluster)

The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list. If you do not specify a cluster, the default cluster is assumed.

Parameters:

cluster - The short name or full Amazon Resource Name (ARN) of the cluster that hosts the tasks to list. If you do not specify a cluster, the default cluster is assumed.

Returns:

Returns a reference to this object so that method calls can be chained together.

setContainerInstance

public void setContainerInstance(String containerInstance)

The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results. Specifying a containerInstance limits the results to tasks that belong to that container instance.

Parameters:

containerInstance - The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results. Specifying a containerInstance limits the results to tasks that belong to that container instance.

getContainerInstance

public String getContainerInstance()

The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results. Specifying a containerInstance limits the results to tasks that belong to that container instance.

Returns:

The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results. Specifying a containerInstance limits the results to tasks that belong to that container instance.

withContainerInstance

public ListTasksRequest withContainerInstance(String containerInstance)

The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results. Specifying a containerInstance limits the results to tasks that belong to that container instance.

Parameters:

containerInstance - The container instance ID or full Amazon Resource Name (ARN) of the container instance with which to filter the ListTasks results. Specifying a containerInstance limits the results to tasks that belong to that container instance.

Returns:

Returns a reference to this object so that method calls can be chained together.

setFamily

public void setFamily(String family)

The name of the family with which to filter the ListTasks results. Specifying a family limits the results to tasks that belong to that family.

Parameters:

family - The name of the family with which to filter the ListTasks results. Specifying a family limits the results to tasks that belong to that family.

getFamily

public String getFamily()

The name of the family with which to filter the ListTasks results. Specifying a family limits the results to tasks that belong to that family.

Returns:

The name of the family with which to filter the ListTasks results. Specifying a family limits the results to tasks that belong to that family.

withFamily

public ListTasksRequest withFamily(String family)

The name of the family with which to filter the ListTasks results. Specifying a family limits the results to tasks that belong to that family.

Parameters:

family - The name of the family with which to filter the ListTasks results. Specifying a family limits the results to tasks that belong to that family.

Returns:

Returns a reference to this object so that method calls can be chained together.

setNextToken

public void setNextToken(String nextToken)

The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.

This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.

Parameters:

nextToken - The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.

This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.

getNextToken

public String getNextToken()

The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.

This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.

Returns:

The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.

This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.

withNextToken

public ListTasksRequest withNextToken(String nextToken)

The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.

This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.

Parameters:

nextToken - The nextToken value returned from a previous paginated ListTasks request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.

This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.

Returns:

Returns a reference to this object so that method calls can be chained together.

setMaxResults

public void setMaxResults(Integer maxResults)

The maximum number of task results returned by ListTasks in paginated output. When this parameter is used, ListTasks only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTasks request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTasks returns up to 100 results and a nextToken value if applicable.

Parameters:

maxResults - The maximum number of task results returned by ListTasks in paginated output. When this parameter is used, ListTasks only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTasks request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTasks returns up to 100 results and a nextToken value if applicable.

getMaxResults

public Integer getMaxResults()

The maximum number of task results returned by ListTasks in paginated output. When this parameter is used, ListTasks only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTasks request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTasks returns up to 100 results and a nextToken value if applicable.

Returns:

The maximum number of task results returned by ListTasks in paginated output. When this parameter is used, ListTasks only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTasks request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTasks returns up to 100 results and a nextToken value if applicable.

withMaxResults

public ListTasksRequest withMaxResults(Integer maxResults)

The maximum number of task results returned by ListTasks in paginated output. When this parameter is used, ListTasks only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTasks request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTasks returns up to 100 results and a nextToken value if applicable.

Parameters:

maxResults - The maximum number of task results returned by ListTasks in paginated output. When this parameter is used, ListTasks only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTasks request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTasks returns up to 100 results and a nextToken value if applicable.

Returns:

Returns a reference to this object so that method calls can be chained together.

setStartedBy

public void setStartedBy(String startedBy)

The startedBy value with which to filter the task results. Specifying a startedBy value limits the results to tasks that were started with that value.

Parameters:

startedBy - The startedBy value with which to filter the task results. Specifying a startedBy value limits the results to tasks that were started with that value.

getStartedBy

public String getStartedBy()

The startedBy value with which to filter the task results. Specifying a startedBy value limits the results to tasks that were started with that value.

Returns:

The startedBy value with which to filter the task results. Specifying a startedBy value limits the results to tasks that were started with that value.

withStartedBy

public ListTasksRequest withStartedBy(String startedBy)

The startedBy value with which to filter the task results. Specifying a startedBy value limits the results to tasks that were started with that value.

Parameters:

startedBy - The startedBy value with which to filter the task results. Specifying a startedBy value limits the results to tasks that were started with that value.

Returns:

Returns a reference to this object so that method calls can be chained together.

setServiceName

public void setServiceName(String serviceName)

The name of the service with which to filter the ListTasks results. Specifying a serviceName limits the results to tasks that belong to that service.

Parameters:

serviceName - The name of the service with which to filter the ListTasks results. Specifying a serviceName limits the results to tasks that belong to that service.

getServiceName

public String getServiceName()

The name of the service with which to filter the ListTasks results. Specifying a serviceName limits the results to tasks that belong to that service.

Returns:

The name of the service with which to filter the ListTasks results. Specifying a serviceName limits the results to tasks that belong to that service.

withServiceName

public ListTasksRequest withServiceName(String serviceName)

The name of the service with which to filter the ListTasks results. Specifying a serviceName limits the results to tasks that belong to that service.

Parameters:

serviceName - The name of the service with which to filter the ListTasks results. Specifying a serviceName limits the results to tasks that belong to that service.

Returns:

Returns a reference to this object so that method calls can be chained together.

setDesiredStatus

public void setDesiredStatus(String desiredStatus)

The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

Parameters:

desiredStatus - The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

See Also:

DesiredStatus

getDesiredStatus

public String getDesiredStatus()

The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

Returns:

The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

See Also:

DesiredStatus

withDesiredStatus

public ListTasksRequest withDesiredStatus(String desiredStatus)

The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

Parameters:

desiredStatus - The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

DesiredStatus

setDesiredStatus

public void setDesiredStatus(DesiredStatus desiredStatus)

The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

Parameters:

desiredStatus - The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

See Also:

DesiredStatus

withDesiredStatus

public ListTasksRequest withDesiredStatus(DesiredStatus desiredStatus)

The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

Parameters:

desiredStatus - The task desired status with which to filter the ListTasks results. Specifying a desiredStatus of STOPPED limits the results to tasks that ECS has set the desired status to STOPPED, which can be useful for debugging tasks that are not starting properly or have died or finished. The default status filter is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.

Although you can filter results based on a desired status of PENDING, this will not return any results because ECS never sets the desired status of a task to that value (only a task's lastStatus may have a value of PENDING).

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

DesiredStatus

toString

public String toString()

Returns a string representation of this object; useful for testing and debugging.

Overrides:

toString in class Object

Returns:

A string representation of this object.

See Also:

Object.toString()

equals

public boolean equals(Object obj)

Overrides:

equals in class Object

hashCode

public int hashCode()

Overrides:

hashCode in class Object

clone

public ListTasksRequest clone()

Overrides:

clone in class AmazonWebServiceRequest