@Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class VideoParameters extends Object implements Serializable, Cloneable, StructuredPojo
The VideoParameters structure.
| Constructor and Description |
|---|
VideoParameters() |
| Modifier and Type | Method and Description |
|---|---|
VideoParameters |
addCodecOptionsEntry(String key,
String value) |
VideoParameters |
clearCodecOptionsEntries()
Removes all the entries added into CodecOptions.
|
VideoParameters |
clone() |
boolean |
equals(Object obj) |
String |
getAspectRatio()
|
String |
getBitRate()
The bit rate of the video stream in the output file, in kilobits/second.
|
String |
getCodec()
The video codec for the output file.
|
Map<String,String> |
getCodecOptions()
Profile (H.264/VP8/VP9 Only)
|
String |
getDisplayAspectRatio()
The value that Elastic Transcoder adds to the metadata in the output file.
|
String |
getFixedGOP()
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or
VP8. |
String |
getFrameRate()
The frames per second for the video stream in the output file.
|
String |
getKeyframesMaxDist()
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or
VP8. |
String |
getMaxFrameRate()
If you specify
auto for FrameRate, Elastic Transcoder uses the frame rate of the input
video for the frame rate of the output video. |
String |
getMaxHeight()
The maximum height of the output video in pixels.
|
String |
getMaxWidth()
The maximum width of the output video in pixels.
|
String |
getPaddingPolicy()
When you set
PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and
bottom and/or left and right sides of the output video to make the total size of the output video match the
values that you specified for MaxWidth and MaxHeight. |
String |
getResolution()
|
String |
getSizingPolicy()
Specify one of the following values to control scaling of the output video:
|
List<PresetWatermark> |
getWatermarks()
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos
that are transcoded using this preset.
|
int |
hashCode() |
void |
marshall(ProtocolMarshaller protocolMarshaller) |
void |
setAspectRatio(String aspectRatio)
|
void |
setBitRate(String bitRate)
The bit rate of the video stream in the output file, in kilobits/second.
|
void |
setCodec(String codec)
The video codec for the output file.
|
void |
setCodecOptions(Map<String,String> codecOptions)
Profile (H.264/VP8/VP9 Only)
|
void |
setDisplayAspectRatio(String displayAspectRatio)
The value that Elastic Transcoder adds to the metadata in the output file.
|
void |
setFixedGOP(String fixedGOP)
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or
VP8. |
void |
setFrameRate(String frameRate)
The frames per second for the video stream in the output file.
|
void |
setKeyframesMaxDist(String keyframesMaxDist)
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or
VP8. |
void |
setMaxFrameRate(String maxFrameRate)
If you specify
auto for FrameRate, Elastic Transcoder uses the frame rate of the input
video for the frame rate of the output video. |
void |
setMaxHeight(String maxHeight)
The maximum height of the output video in pixels.
|
void |
setMaxWidth(String maxWidth)
The maximum width of the output video in pixels.
|
void |
setPaddingPolicy(String paddingPolicy)
When you set
PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and
bottom and/or left and right sides of the output video to make the total size of the output video match the
values that you specified for MaxWidth and MaxHeight. |
void |
setResolution(String resolution)
|
void |
setSizingPolicy(String sizingPolicy)
Specify one of the following values to control scaling of the output video:
|
void |
setWatermarks(Collection<PresetWatermark> watermarks)
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos
that are transcoded using this preset.
|
String |
toString()
Returns a string representation of this object.
|
VideoParameters |
withAspectRatio(String aspectRatio)
|
VideoParameters |
withBitRate(String bitRate)
The bit rate of the video stream in the output file, in kilobits/second.
|
VideoParameters |
withCodec(String codec)
The video codec for the output file.
|
VideoParameters |
withCodecOptions(Map<String,String> codecOptions)
Profile (H.264/VP8/VP9 Only)
|
VideoParameters |
withDisplayAspectRatio(String displayAspectRatio)
The value that Elastic Transcoder adds to the metadata in the output file.
|
VideoParameters |
withFixedGOP(String fixedGOP)
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or
VP8. |
VideoParameters |
withFrameRate(String frameRate)
The frames per second for the video stream in the output file.
|
VideoParameters |
withKeyframesMaxDist(String keyframesMaxDist)
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or
VP8. |
VideoParameters |
withMaxFrameRate(String maxFrameRate)
If you specify
auto for FrameRate, Elastic Transcoder uses the frame rate of the input
video for the frame rate of the output video. |
VideoParameters |
withMaxHeight(String maxHeight)
The maximum height of the output video in pixels.
|
VideoParameters |
withMaxWidth(String maxWidth)
The maximum width of the output video in pixels.
|
VideoParameters |
withPaddingPolicy(String paddingPolicy)
When you set
PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and
bottom and/or left and right sides of the output video to make the total size of the output video match the
values that you specified for MaxWidth and MaxHeight. |
VideoParameters |
withResolution(String resolution)
|
VideoParameters |
withSizingPolicy(String sizingPolicy)
Specify one of the following values to control scaling of the output video:
|
VideoParameters |
withWatermarks(Collection<PresetWatermark> watermarks)
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos
that are transcoded using this preset.
|
VideoParameters |
withWatermarks(PresetWatermark... watermarks)
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos
that are transcoded using this preset.
|
public void setCodec(String codec)
The video codec for the output file. Valid values include gif, H.264,
mpeg2, vp8, and vp9. You can only specify vp8 and
vp9 when the container type is webm, gif when the container type is
gif, and mpeg2 when the container type is mpg.
codec - The video codec for the output file. Valid values include gif, H.264,
mpeg2, vp8, and vp9. You can only specify vp8 and
vp9 when the container type is webm, gif when the container type is
gif, and mpeg2 when the container type is mpg.public String getCodec()
The video codec for the output file. Valid values include gif, H.264,
mpeg2, vp8, and vp9. You can only specify vp8 and
vp9 when the container type is webm, gif when the container type is
gif, and mpeg2 when the container type is mpg.
gif, H.264,
mpeg2, vp8, and vp9. You can only specify vp8 and
vp9 when the container type is webm, gif when the container type
is gif, and mpeg2 when the container type is mpg.public VideoParameters withCodec(String codec)
The video codec for the output file. Valid values include gif, H.264,
mpeg2, vp8, and vp9. You can only specify vp8 and
vp9 when the container type is webm, gif when the container type is
gif, and mpeg2 when the container type is mpg.
codec - The video codec for the output file. Valid values include gif, H.264,
mpeg2, vp8, and vp9. You can only specify vp8 and
vp9 when the container type is webm, gif when the container type is
gif, and mpeg2 when the container type is mpg.public Map<String,String> getCodecOptions()
Profile (H.264/VP8/VP9 Only)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly used for videoconferencing and for mobile applications.
main: The profile used for standard-definition digital TV broadcasts.
high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.
Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1, 1.2, 1.3, 2,
2.1, 2.2, 3, 3.1, 3.2, 4,
4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)
where Width in pixels and Height in pixels represent either MaxWidth and MaxHeight, or Resolution.
Maximum decoded picture buffer in macroblocks depends on the value of the Level object. See
the list below. (A macroblock is a block of pixels measuring 16x16.)
1 - 396
1b - 396
1.1 - 900
1.2 - 2376
1.3 - 2376
2 - 2376
2.1 - 4752
2.2 - 8100
3 - 8100
3.1 - 18000
3.2 - 20480
4 - 32768
4.1 - 32768
MaxBitRate (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits per second in a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You can reduce the bandwidth required to stream a
video by reducing the maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits in any x seconds of the output video. This window is commonly 10 seconds, the standard
segment duration when you're using FMP4 or MPEG-TS for the container type of the output video. Specify an integer
greater than 0. If you specify MaxBitRate and omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid values include Progressive (no interlacing, top to bottom), TopFirst (top field
first), BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder uses Progressive for the output.
If Auto is specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The color space conversion Elastic Transcoder applies to the output video. Color spaces are the algorithms used
by the computer to store information about how to render color. Bt.601 is the standard for standard
definition video, while Bt.709 is the standard for high definition video.
Valid values include None, Bt709toBt601, Bt601toBt709, and
Auto.
If you chose Auto for ColorSpaceConversionMode and your output is interlaced, your
frame rate is one of 23.97, 24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you are using one of the resolution changes
from the list below, Elastic Transcoder applies the following color space conversions:
Standard to HD, 720x480 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
Standard to HD, 720x576 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
HD to Standard, 1920x1080 to 720x480 - Elastic Transcoder applies Bt709ToBt601
HD to Standard, 1920x1080 to 720x576 - Elastic Transcoder applies Bt709ToBt601
Elastic Transcoder may change the behavior of the ColorspaceConversionMode Auto mode in
the future. All outputs in a playlist must use the same ColorSpaceConversionMode.
If you do not specify a ColorSpaceConversionMode, Elastic Transcoder does not change the color space
of a file. If you are unsure what ColorSpaceConversionMode was applied to your output file, you can
check the AppliedColorSpaceConversion parameter included in your job response. If your job does not
have an AppliedColorSpaceConversion in its response, no ColorSpaceConversionMode was
applied.
ChromaSubsampling
The sampling pattern for the chroma (color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p samples the chroma information of every other horizontal and every other vertical line,
yuv422p samples the color information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the output gif to loop. Valid values include Infinite and integers
between 0 and 100, inclusive.
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly used for videoconferencing and for mobile applications.
main: The profile used for standard-definition digital TV broadcasts.
high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.
Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1, 1.2, 1.3, 2,
2.1, 2.2, 3, 3.1, 3.2, 4,
4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)
where Width in pixels and Height in pixels represent either MaxWidth and MaxHeight, or
Resolution. Maximum decoded picture buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a block of pixels measuring 16x16.)
1 - 396
1b - 396
1.1 - 900
1.2 - 2376
1.3 - 2376
2 - 2376
2.1 - 4752
2.2 - 8100
3 - 8100
3.1 - 18000
3.2 - 20480
4 - 32768
4.1 - 32768
MaxBitRate (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits per second in a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You can reduce the bandwidth required to
stream a video by reducing the maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits in any x seconds of the output video. This window is commonly 10 seconds, the
standard segment duration when you're using FMP4 or MPEG-TS for the container type of the output video.
Specify an integer greater than 0. If you specify MaxBitRate and omit
BufferSize, Elastic Transcoder sets BufferSize to 10 times the value of
MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid values include Progressive (no interlacing, top to bottom), TopFirst (top
field first), BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder uses Progressive for the
output. If Auto is specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The color space conversion Elastic Transcoder applies to the output video. Color spaces are the
algorithms used by the computer to store information about how to render color. Bt.601 is
the standard for standard definition video, while Bt.709 is the standard for high definition
video.
Valid values include None, Bt709toBt601, Bt601toBt709, and
Auto.
If you chose Auto for ColorSpaceConversionMode and your output is interlaced,
your frame rate is one of 23.97, 24, 25, 29.97,
50, or 60, your SegmentDuration is null, and you are using one of
the resolution changes from the list below, Elastic Transcoder applies the following color space
conversions:
Standard to HD, 720x480 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
Standard to HD, 720x576 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
HD to Standard, 1920x1080 to 720x480 - Elastic Transcoder applies Bt709ToBt601
HD to Standard, 1920x1080 to 720x576 - Elastic Transcoder applies Bt709ToBt601
Elastic Transcoder may change the behavior of the ColorspaceConversionMode Auto
mode in the future. All outputs in a playlist must use the same ColorSpaceConversionMode.
If you do not specify a ColorSpaceConversionMode, Elastic Transcoder does not change the
color space of a file. If you are unsure what ColorSpaceConversionMode was applied to your
output file, you can check the AppliedColorSpaceConversion parameter included in your job
response. If your job does not have an AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma (color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p samples the chroma information of every other horizontal and every other vertical
line, yuv422p samples the color information of every horizontal line and every other
vertical line.
LoopCount (Gif Only)
The number of times you want the output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
public void setCodecOptions(Map<String,String> codecOptions)
Profile (H.264/VP8/VP9 Only)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly used for videoconferencing and for mobile applications.
main: The profile used for standard-definition digital TV broadcasts.
high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.
Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1, 1.2, 1.3, 2,
2.1, 2.2, 3, 3.1, 3.2, 4,
4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)
where Width in pixels and Height in pixels represent either MaxWidth and MaxHeight, or Resolution.
Maximum decoded picture buffer in macroblocks depends on the value of the Level object. See
the list below. (A macroblock is a block of pixels measuring 16x16.)
1 - 396
1b - 396
1.1 - 900
1.2 - 2376
1.3 - 2376
2 - 2376
2.1 - 4752
2.2 - 8100
3 - 8100
3.1 - 18000
3.2 - 20480
4 - 32768
4.1 - 32768
MaxBitRate (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits per second in a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You can reduce the bandwidth required to stream a
video by reducing the maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits in any x seconds of the output video. This window is commonly 10 seconds, the standard
segment duration when you're using FMP4 or MPEG-TS for the container type of the output video. Specify an integer
greater than 0. If you specify MaxBitRate and omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid values include Progressive (no interlacing, top to bottom), TopFirst (top field
first), BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder uses Progressive for the output.
If Auto is specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The color space conversion Elastic Transcoder applies to the output video. Color spaces are the algorithms used
by the computer to store information about how to render color. Bt.601 is the standard for standard
definition video, while Bt.709 is the standard for high definition video.
Valid values include None, Bt709toBt601, Bt601toBt709, and
Auto.
If you chose Auto for ColorSpaceConversionMode and your output is interlaced, your
frame rate is one of 23.97, 24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you are using one of the resolution changes
from the list below, Elastic Transcoder applies the following color space conversions:
Standard to HD, 720x480 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
Standard to HD, 720x576 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
HD to Standard, 1920x1080 to 720x480 - Elastic Transcoder applies Bt709ToBt601
HD to Standard, 1920x1080 to 720x576 - Elastic Transcoder applies Bt709ToBt601
Elastic Transcoder may change the behavior of the ColorspaceConversionMode Auto mode in
the future. All outputs in a playlist must use the same ColorSpaceConversionMode.
If you do not specify a ColorSpaceConversionMode, Elastic Transcoder does not change the color space
of a file. If you are unsure what ColorSpaceConversionMode was applied to your output file, you can
check the AppliedColorSpaceConversion parameter included in your job response. If your job does not
have an AppliedColorSpaceConversion in its response, no ColorSpaceConversionMode was
applied.
ChromaSubsampling
The sampling pattern for the chroma (color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p samples the chroma information of every other horizontal and every other vertical line,
yuv422p samples the color information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the output gif to loop. Valid values include Infinite and integers
between 0 and 100, inclusive.
codecOptions - Profile (H.264/VP8/VP9 Only)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly used for videoconferencing and for mobile applications.
main: The profile used for standard-definition digital TV broadcasts.
high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.
Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1, 1.2, 1.3, 2,
2.1, 2.2, 3, 3.1, 3.2, 4,
4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)
where Width in pixels and Height in pixels represent either MaxWidth and MaxHeight, or
Resolution. Maximum decoded picture buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a block of pixels measuring 16x16.)
1 - 396
1b - 396
1.1 - 900
1.2 - 2376
1.3 - 2376
2 - 2376
2.1 - 4752
2.2 - 8100
3 - 8100
3.1 - 18000
3.2 - 20480
4 - 32768
4.1 - 32768
MaxBitRate (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits per second in a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You can reduce the bandwidth required to
stream a video by reducing the maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits in any x seconds of the output video. This window is commonly 10 seconds, the
standard segment duration when you're using FMP4 or MPEG-TS for the container type of the output video.
Specify an integer greater than 0. If you specify MaxBitRate and omit BufferSize
, Elastic Transcoder sets BufferSize to 10 times the value of MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid values include Progressive (no interlacing, top to bottom), TopFirst (top
field first), BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder uses Progressive for the
output. If Auto is specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The color space conversion Elastic Transcoder applies to the output video. Color spaces are the algorithms
used by the computer to store information about how to render color. Bt.601 is the standard
for standard definition video, while Bt.709 is the standard for high definition video.
Valid values include None, Bt709toBt601, Bt601toBt709, and
Auto.
If you chose Auto for ColorSpaceConversionMode and your output is interlaced,
your frame rate is one of 23.97, 24, 25, 29.97,
50, or 60, your SegmentDuration is null, and you are using one of
the resolution changes from the list below, Elastic Transcoder applies the following color space
conversions:
Standard to HD, 720x480 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
Standard to HD, 720x576 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
HD to Standard, 1920x1080 to 720x480 - Elastic Transcoder applies Bt709ToBt601
HD to Standard, 1920x1080 to 720x576 - Elastic Transcoder applies Bt709ToBt601
Elastic Transcoder may change the behavior of the ColorspaceConversionMode Auto
mode in the future. All outputs in a playlist must use the same ColorSpaceConversionMode.
If you do not specify a ColorSpaceConversionMode, Elastic Transcoder does not change the
color space of a file. If you are unsure what ColorSpaceConversionMode was applied to your
output file, you can check the AppliedColorSpaceConversion parameter included in your job
response. If your job does not have an AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma (color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p samples the chroma information of every other horizontal and every other vertical
line, yuv422p samples the color information of every horizontal line and every other vertical
line.
LoopCount (Gif Only)
The number of times you want the output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
public VideoParameters withCodecOptions(Map<String,String> codecOptions)
Profile (H.264/VP8/VP9 Only)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly used for videoconferencing and for mobile applications.
main: The profile used for standard-definition digital TV broadcasts.
high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.
Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1, 1.2, 1.3, 2,
2.1, 2.2, 3, 3.1, 3.2, 4,
4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)
where Width in pixels and Height in pixels represent either MaxWidth and MaxHeight, or Resolution.
Maximum decoded picture buffer in macroblocks depends on the value of the Level object. See
the list below. (A macroblock is a block of pixels measuring 16x16.)
1 - 396
1b - 396
1.1 - 900
1.2 - 2376
1.3 - 2376
2 - 2376
2.1 - 4752
2.2 - 8100
3 - 8100
3.1 - 18000
3.2 - 20480
4 - 32768
4.1 - 32768
MaxBitRate (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits per second in a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You can reduce the bandwidth required to stream a
video by reducing the maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits in any x seconds of the output video. This window is commonly 10 seconds, the standard
segment duration when you're using FMP4 or MPEG-TS for the container type of the output video. Specify an integer
greater than 0. If you specify MaxBitRate and omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid values include Progressive (no interlacing, top to bottom), TopFirst (top field
first), BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder uses Progressive for the output.
If Auto is specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The color space conversion Elastic Transcoder applies to the output video. Color spaces are the algorithms used
by the computer to store information about how to render color. Bt.601 is the standard for standard
definition video, while Bt.709 is the standard for high definition video.
Valid values include None, Bt709toBt601, Bt601toBt709, and
Auto.
If you chose Auto for ColorSpaceConversionMode and your output is interlaced, your
frame rate is one of 23.97, 24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you are using one of the resolution changes
from the list below, Elastic Transcoder applies the following color space conversions:
Standard to HD, 720x480 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
Standard to HD, 720x576 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
HD to Standard, 1920x1080 to 720x480 - Elastic Transcoder applies Bt709ToBt601
HD to Standard, 1920x1080 to 720x576 - Elastic Transcoder applies Bt709ToBt601
Elastic Transcoder may change the behavior of the ColorspaceConversionMode Auto mode in
the future. All outputs in a playlist must use the same ColorSpaceConversionMode.
If you do not specify a ColorSpaceConversionMode, Elastic Transcoder does not change the color space
of a file. If you are unsure what ColorSpaceConversionMode was applied to your output file, you can
check the AppliedColorSpaceConversion parameter included in your job response. If your job does not
have an AppliedColorSpaceConversion in its response, no ColorSpaceConversionMode was
applied.
ChromaSubsampling
The sampling pattern for the chroma (color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p samples the chroma information of every other horizontal and every other vertical line,
yuv422p samples the color information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the output gif to loop. Valid values include Infinite and integers
between 0 and 100, inclusive.
codecOptions - Profile (H.264/VP8/VP9 Only)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly used for videoconferencing and for mobile applications.
main: The profile used for standard-definition digital TV broadcasts.
high: The profile used for high-definition digital TV broadcasts and for Blu-ray discs.
Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1, 1.2, 1.3, 2,
2.1, 2.2, 3, 3.1, 3.2, 4,
4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks * 256 / (Width in pixels * Height in pixels)), 16)
where Width in pixels and Height in pixels represent either MaxWidth and MaxHeight, or
Resolution. Maximum decoded picture buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a block of pixels measuring 16x16.)
1 - 396
1b - 396
1.1 - 900
1.2 - 2376
1.3 - 2376
2 - 2376
2.1 - 4752
2.2 - 8100
3 - 8100
3.1 - 18000
3.2 - 20480
4 - 32768
4.1 - 32768
MaxBitRate (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits per second in a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You can reduce the bandwidth required to
stream a video by reducing the maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8/VP9 only)
The maximum number of bits in any x seconds of the output video. This window is commonly 10 seconds, the
standard segment duration when you're using FMP4 or MPEG-TS for the container type of the output video.
Specify an integer greater than 0. If you specify MaxBitRate and omit BufferSize
, Elastic Transcoder sets BufferSize to 10 times the value of MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid values include Progressive (no interlacing, top to bottom), TopFirst (top
field first), BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder uses Progressive for the
output. If Auto is specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The color space conversion Elastic Transcoder applies to the output video. Color spaces are the algorithms
used by the computer to store information about how to render color. Bt.601 is the standard
for standard definition video, while Bt.709 is the standard for high definition video.
Valid values include None, Bt709toBt601, Bt601toBt709, and
Auto.
If you chose Auto for ColorSpaceConversionMode and your output is interlaced,
your frame rate is one of 23.97, 24, 25, 29.97,
50, or 60, your SegmentDuration is null, and you are using one of
the resolution changes from the list below, Elastic Transcoder applies the following color space
conversions:
Standard to HD, 720x480 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
Standard to HD, 720x576 to 1920x1080 - Elastic Transcoder applies Bt601ToBt709
HD to Standard, 1920x1080 to 720x480 - Elastic Transcoder applies Bt709ToBt601
HD to Standard, 1920x1080 to 720x576 - Elastic Transcoder applies Bt709ToBt601
Elastic Transcoder may change the behavior of the ColorspaceConversionMode Auto
mode in the future. All outputs in a playlist must use the same ColorSpaceConversionMode.
If you do not specify a ColorSpaceConversionMode, Elastic Transcoder does not change the
color space of a file. If you are unsure what ColorSpaceConversionMode was applied to your
output file, you can check the AppliedColorSpaceConversion parameter included in your job
response. If your job does not have an AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma (color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p samples the chroma information of every other horizontal and every other vertical
line, yuv422p samples the color information of every horizontal line and every other vertical
line.
LoopCount (Gif Only)
The number of times you want the output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
public VideoParameters addCodecOptionsEntry(String key, String value)
public VideoParameters clearCodecOptionsEntries()
public void setKeyframesMaxDist(String keyframesMaxDist)
Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For Smooth outputs, the FrameRate must have a constant ratio to the
KeyframesMaxDist. This allows Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file can have a FrameRate of 30 with a KeyframesMaxDist of 90.
The output file then needs to have a ratio of 1:3. Valid outputs would have FrameRate of 30, 25, and
10, and KeyframesMaxDist of 90, 75, and 30, respectively.
Alternately, this can be achieved by setting FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
keyframesMaxDist - Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For Smooth outputs, the FrameRate must have a constant ratio to the
KeyframesMaxDist. This allows Smooth playlists to switch between different
quality levels while the file is being played.
For example, an input file can have a FrameRate of 30 with a KeyframesMaxDist of
90. The output file then needs to have a ratio of 1:3. Valid outputs would have FrameRate of
30, 25, and 10, and KeyframesMaxDist of 90, 75, and 30, respectively.
Alternately, this can be achieved by setting FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
public String getKeyframesMaxDist()
Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For Smooth outputs, the FrameRate must have a constant ratio to the
KeyframesMaxDist. This allows Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file can have a FrameRate of 30 with a KeyframesMaxDist of 90.
The output file then needs to have a ratio of 1:3. Valid outputs would have FrameRate of 30, 25, and
10, and KeyframesMaxDist of 90, 75, and 30, respectively.
Alternately, this can be achieved by setting FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
H.264, MPEG2, or
VP8.
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For Smooth outputs, the FrameRate must have a constant ratio to the
KeyframesMaxDist. This allows Smooth playlists to switch between different
quality levels while the file is being played.
For example, an input file can have a FrameRate of 30 with a KeyframesMaxDist
of 90. The output file then needs to have a ratio of 1:3. Valid outputs would have FrameRate
of 30, 25, and 10, and KeyframesMaxDist of 90, 75, and 30, respectively.
Alternately, this can be achieved by setting FrameRate to auto and having the same values
for MaxFrameRate and KeyframesMaxDist.
public VideoParameters withKeyframesMaxDist(String keyframesMaxDist)
Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For Smooth outputs, the FrameRate must have a constant ratio to the
KeyframesMaxDist. This allows Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file can have a FrameRate of 30 with a KeyframesMaxDist of 90.
The output file then needs to have a ratio of 1:3. Valid outputs would have FrameRate of 30, 25, and
10, and KeyframesMaxDist of 90, 75, and 30, respectively.
Alternately, this can be achieved by setting FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
keyframesMaxDist - Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For Smooth outputs, the FrameRate must have a constant ratio to the
KeyframesMaxDist. This allows Smooth playlists to switch between different
quality levels while the file is being played.
For example, an input file can have a FrameRate of 30 with a KeyframesMaxDist of
90. The output file then needs to have a ratio of 1:3. Valid outputs would have FrameRate of
30, 25, and 10, and KeyframesMaxDist of 90, 75, and 30, respectively.
Alternately, this can be achieved by setting FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
public void setFixedGOP(String fixedGOP)
Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
Whether to use a fixed value for FixedGOP. Valid values are true and false
:
true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance between
key frames (the number of frames in a group of pictures, or GOP).
false: The distance between key frames can vary.
FixedGOP must be set to true for fmp4 containers.
fixedGOP - Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
Whether to use a fixed value for FixedGOP. Valid values are true and
false:
true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance
between key frames (the number of frames in a group of pictures, or GOP).
false: The distance between key frames can vary.
FixedGOP must be set to true for fmp4 containers.
public String getFixedGOP()
Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
Whether to use a fixed value for FixedGOP. Valid values are true and false
:
true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance between
key frames (the number of frames in a group of pictures, or GOP).
false: The distance between key frames can vary.
FixedGOP must be set to true for fmp4 containers.
H.264, MPEG2, or
VP8.
Whether to use a fixed value for FixedGOP. Valid values are true and
false:
true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance
between key frames (the number of frames in a group of pictures, or GOP).
false: The distance between key frames can vary.
FixedGOP must be set to true for fmp4 containers.
public VideoParameters withFixedGOP(String fixedGOP)
Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
Whether to use a fixed value for FixedGOP. Valid values are true and false
:
true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance between
key frames (the number of frames in a group of pictures, or GOP).
false: The distance between key frames can vary.
FixedGOP must be set to true for fmp4 containers.
fixedGOP - Applicable only when the value of Video:Codec is one of H.264, MPEG2, or
VP8.
Whether to use a fixed value for FixedGOP. Valid values are true and
false:
true: Elastic Transcoder uses the value of KeyframesMaxDist for the distance
between key frames (the number of frames in a group of pictures, or GOP).
false: The distance between key frames can vary.
FixedGOP must be set to true for fmp4 containers.
public void setBitRate(String bitRate)
The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of
Level and Profile. If you specify auto, Elastic Transcoder uses the
detected bit rate of the input source. If you specify a value other than auto, we recommend that you
specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:
Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
1 - 64 : 80
1b - 128 : 160
1.1 - 192 : 240
1.2 - 384 : 480
1.3 - 768 : 960
2 - 2000 : 2500
3 - 10000 : 12500
3.1 - 14000 : 17500
3.2 - 20000 : 25000
4 - 20000 : 25000
4.1 - 50000 : 62500
bitRate - The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values
of Level and Profile. If you specify auto, Elastic Transcoder uses
the detected bit rate of the input source. If you specify a value other than auto, we
recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your
level and profile:
Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
1 - 64 : 80
1b - 128 : 160
1.1 - 192 : 240
1.2 - 384 : 480
1.3 - 768 : 960
2 - 2000 : 2500
3 - 10000 : 12500
3.1 - 14000 : 17500
3.2 - 20000 : 25000
4 - 20000 : 25000
4.1 - 50000 : 62500
public String getBitRate()
The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of
Level and Profile. If you specify auto, Elastic Transcoder uses the
detected bit rate of the input source. If you specify a value other than auto, we recommend that you
specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:
Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
1 - 64 : 80
1b - 128 : 160
1.1 - 192 : 240
1.2 - 384 : 480
1.3 - 768 : 960
2 - 2000 : 2500
3 - 10000 : 12500
3.1 - 14000 : 17500
3.2 - 20000 : 25000
4 - 20000 : 25000
4.1 - 50000 : 62500
Level and Profile. If you specify auto, Elastic
Transcoder uses the detected bit rate of the input source. If you specify a value other than
auto, we recommend that you specify a value less than or equal to the maximum
H.264-compliant value listed for your level and profile:
Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
1 - 64 : 80
1b - 128 : 160
1.1 - 192 : 240
1.2 - 384 : 480
1.3 - 768 : 960
2 - 2000 : 2500
3 - 10000 : 12500
3.1 - 14000 : 17500
3.2 - 20000 : 25000
4 - 20000 : 25000
4.1 - 50000 : 62500
public VideoParameters withBitRate(String bitRate)
The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values of
Level and Profile. If you specify auto, Elastic Transcoder uses the
detected bit rate of the input source. If you specify a value other than auto, we recommend that you
specify a value less than or equal to the maximum H.264-compliant value listed for your level and profile:
Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
1 - 64 : 80
1b - 128 : 160
1.1 - 192 : 240
1.2 - 384 : 480
1.3 - 768 : 960
2 - 2000 : 2500
3 - 10000 : 12500
3.1 - 14000 : 17500
3.2 - 20000 : 25000
4 - 20000 : 25000
4.1 - 50000 : 62500
bitRate - The bit rate of the video stream in the output file, in kilobits/second. Valid values depend on the values
of Level and Profile. If you specify auto, Elastic Transcoder uses
the detected bit rate of the input source. If you specify a value other than auto, we
recommend that you specify a value less than or equal to the maximum H.264-compliant value listed for your
level and profile:
Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
1 - 64 : 80
1b - 128 : 160
1.1 - 192 : 240
1.2 - 384 : 480
1.3 - 768 : 960
2 - 2000 : 2500
3 - 10000 : 12500
3.1 - 14000 : 17500
3.2 - 20000 : 25000
4 - 20000 : 25000
4.1 - 50000 : 62500
public void setFrameRate(String frameRate)
The frames per second for the video stream in the output file. Valid values include:
auto, 10, 15, 23.97, 24, 25,
29.97, 30, 60
If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you
specify a frame rate, we recommend that you perform the following calculation:
Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)
where:
width in pixels and height in pixels represent the Resolution of the output video.
maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
1 - 380160
1b - 380160
1.1 - 76800
1.2 - 1536000
1.3 - 3041280
2 - 3041280
2.1 - 5068800
2.2 - 5184000
3 - 10368000
3.1 - 27648000
3.2 - 55296000
4 - 62914560
4.1 - 62914560
frameRate - The frames per second for the video stream in the output file. Valid values include:
auto, 10, 15, 23.97, 24, 25,
29.97, 30, 60
If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If
you specify a frame rate, we recommend that you perform the following calculation:
Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)
where:
width in pixels and height in pixels represent the Resolution of the output video.
maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
1 - 380160
1b - 380160
1.1 - 76800
1.2 - 1536000
1.3 - 3041280
2 - 3041280
2.1 - 5068800
2.2 - 5184000
3 - 10368000
3.1 - 27648000
3.2 - 55296000
4 - 62914560
4.1 - 62914560
public String getFrameRate()
The frames per second for the video stream in the output file. Valid values include:
auto, 10, 15, 23.97, 24, 25,
29.97, 30, 60
If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you
specify a frame rate, we recommend that you perform the following calculation:
Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)
where:
width in pixels and height in pixels represent the Resolution of the output video.
maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
1 - 380160
1b - 380160
1.1 - 76800
1.2 - 1536000
1.3 - 3041280
2 - 3041280
2.1 - 5068800
2.2 - 5184000
3 - 10368000
3.1 - 27648000
3.2 - 55296000
4 - 62914560
4.1 - 62914560
auto, 10, 15, 23.97, 24, 25, 29.97, 30, 60
If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If
you specify a frame rate, we recommend that you perform the following calculation:
Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)
where:
width in pixels and height in pixels represent the Resolution of the output video.
maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
1 - 380160
1b - 380160
1.1 - 76800
1.2 - 1536000
1.3 - 3041280
2 - 3041280
2.1 - 5068800
2.2 - 5184000
3 - 10368000
3.1 - 27648000
3.2 - 55296000
4 - 62914560
4.1 - 62914560
public VideoParameters withFrameRate(String frameRate)
The frames per second for the video stream in the output file. Valid values include:
auto, 10, 15, 23.97, 24, 25,
29.97, 30, 60
If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If you
specify a frame rate, we recommend that you perform the following calculation:
Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)
where:
width in pixels and height in pixels represent the Resolution of the output video.
maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
1 - 380160
1b - 380160
1.1 - 76800
1.2 - 1536000
1.3 - 3041280
2 - 3041280
2.1 - 5068800
2.2 - 5184000
3 - 10368000
3.1 - 27648000
3.2 - 55296000
4 - 62914560
4.1 - 62914560
frameRate - The frames per second for the video stream in the output file. Valid values include:
auto, 10, 15, 23.97, 24, 25,
29.97, 30, 60
If you specify auto, Elastic Transcoder uses the detected frame rate of the input source. If
you specify a frame rate, we recommend that you perform the following calculation:
Frame rate = maximum recommended decoding speed in luma samples/second / (width in pixels * height in pixels)
where:
width in pixels and height in pixels represent the Resolution of the output video.
maximum recommended decoding speed in Luma samples/second is less than or equal to the maximum value listed in the following table, based on the value that you specified for Level.
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
1 - 380160
1b - 380160
1.1 - 76800
1.2 - 1536000
1.3 - 3041280
2 - 3041280
2.1 - 5068800
2.2 - 5184000
3 - 10368000
3.1 - 27648000
3.2 - 55296000
4 - 62914560
4.1 - 62914560
public void setMaxFrameRate(String maxFrameRate)
If you specify auto for FrameRate, Elastic Transcoder uses the frame rate of the input
video for the frame rate of the output video. Specify the maximum frame rate that you want Elastic Transcoder to
use when the frame rate of the input video is greater than the desired maximum frame rate of the output video.
Valid values include: 10, 15, 23.97, 24, 25,
29.97, 30, 60.
maxFrameRate - If you specify auto for FrameRate, Elastic Transcoder uses the frame rate of the
input video for the frame rate of the output video. Specify the maximum frame rate that you want Elastic
Transcoder to use when the frame rate of the input video is greater than the desired maximum frame rate of
the output video. Valid values include: 10, 15, 23.97,
24, 25, 29.97, 30, 60.public String getMaxFrameRate()
If you specify auto for FrameRate, Elastic Transcoder uses the frame rate of the input
video for the frame rate of the output video. Specify the maximum frame rate that you want Elastic Transcoder to
use when the frame rate of the input video is greater than the desired maximum frame rate of the output video.
Valid values include: 10, 15, 23.97, 24, 25,
29.97, 30, 60.
auto for FrameRate, Elastic Transcoder uses the frame rate of
the input video for the frame rate of the output video. Specify the maximum frame rate that you want
Elastic Transcoder to use when the frame rate of the input video is greater than the desired maximum
frame rate of the output video. Valid values include: 10, 15,
23.97, 24, 25, 29.97, 30,
60.public VideoParameters withMaxFrameRate(String maxFrameRate)
If you specify auto for FrameRate, Elastic Transcoder uses the frame rate of the input
video for the frame rate of the output video. Specify the maximum frame rate that you want Elastic Transcoder to
use when the frame rate of the input video is greater than the desired maximum frame rate of the output video.
Valid values include: 10, 15, 23.97, 24, 25,
29.97, 30, 60.
maxFrameRate - If you specify auto for FrameRate, Elastic Transcoder uses the frame rate of the
input video for the frame rate of the output video. Specify the maximum frame rate that you want Elastic
Transcoder to use when the frame rate of the input video is greater than the desired maximum frame rate of
the output video. Valid values include: 10, 15, 23.97,
24, 25, 29.97, 30, 60.public void setResolution(String resolution)
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two groups
of settings are mutually exclusive. Do not use them together.
The width and height of the video in the output file, in pixels. Valid values are auto and
width x height:
auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the
following rules.
width x height : The width and height of the output video in pixels.
Note the following about specifying the width and height:
The width must be an even integer between 128 and 4096, inclusive.
The height must be an even integer between 96 and 3072, inclusive.
If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
1 - 25344
1b - 25344
1.1 - 101376
1.2 - 101376
1.3 - 101376
2 - 101376
2.1 - 202752
2.2 - 404720
3 - 404720
3.1 - 921600
3.2 - 1310720
4 - 2097152
4.1 - 2097152
resolution -
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two
groups of settings are mutually exclusive. Do not use them together.
The width and height of the video in the output file, in pixels. Valid values are auto and
width x height:
auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject
to the following rules.
width x height : The width and height of the output video in pixels.
Note the following about specifying the width and height:
The width must be an even integer between 128 and 4096, inclusive.
The height must be an even integer between 96 and 3072, inclusive.
If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
1 - 25344
1b - 25344
1.1 - 101376
1.2 - 101376
1.3 - 101376
2 - 101376
2.1 - 202752
2.2 - 404720
3 - 404720
3.1 - 921600
3.2 - 1310720
4 - 2097152
4.1 - 2097152
public String getResolution()
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two groups
of settings are mutually exclusive. Do not use them together.
The width and height of the video in the output file, in pixels. Valid values are auto and
width x height:
auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the
following rules.
width x height : The width and height of the output video in pixels.
Note the following about specifying the width and height:
The width must be an even integer between 128 and 4096, inclusive.
The height must be an even integer between 96 and 3072, inclusive.
If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
1 - 25344
1b - 25344
1.1 - 101376
1.2 - 101376
1.3 - 101376
2 - 101376
2.1 - 202752
2.2 - 404720
3 - 404720
3.1 - 921600
3.2 - 1310720
4 - 2097152
4.1 - 2097152
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two
groups of settings are mutually exclusive. Do not use them together.
The width and height of the video in the output file, in pixels. Valid values are auto and
width x height:
auto: Elastic Transcoder attempts to preserve the width and height of the input file,
subject to the following rules.
width x height : The width and height of the output video in pixels.
Note the following about specifying the width and height:
The width must be an even integer between 128 and 4096, inclusive.
The height must be an even integer between 96 and 3072, inclusive.
If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
1 - 25344
1b - 25344
1.1 - 101376
1.2 - 101376
1.3 - 101376
2 - 101376
2.1 - 202752
2.2 - 404720
3 - 404720
3.1 - 921600
3.2 - 1310720
4 - 2097152
4.1 - 2097152
public VideoParameters withResolution(String resolution)
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two groups
of settings are mutually exclusive. Do not use them together.
The width and height of the video in the output file, in pixels. Valid values are auto and
width x height:
auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject to the
following rules.
width x height : The width and height of the output video in pixels.
Note the following about specifying the width and height:
The width must be an even integer between 128 and 4096, inclusive.
The height must be an even integer between 96 and 3072, inclusive.
If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
1 - 25344
1b - 25344
1.1 - 101376
1.2 - 101376
1.3 - 101376
2 - 101376
2.1 - 202752
2.2 - 404720
3 - 404720
3.1 - 921600
3.2 - 1310720
4 - 2097152
4.1 - 2097152
resolution -
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two
groups of settings are mutually exclusive. Do not use them together.
The width and height of the video in the output file, in pixels. Valid values are auto and
width x height:
auto: Elastic Transcoder attempts to preserve the width and height of the input file, subject
to the following rules.
width x height : The width and height of the output video in pixels.
Note the following about specifying the width and height:
The width must be an even integer between 128 and 4096, inclusive.
The height must be an even integer between 96 and 3072, inclusive.
If you specify a resolution that is less than the resolution of the input file, Elastic Transcoder rescales the output file to the lower resolution.
If you specify a resolution that is greater than the resolution of the input file, Elastic Transcoder rescales the output to the higher resolution.
We recommend that you specify a resolution for which the product of width and height is less than or equal to the applicable value in the following list (List - Max width x height value):
1 - 25344
1b - 25344
1.1 - 101376
1.2 - 101376
1.3 - 101376
2 - 101376
2.1 - 202752
2.2 - 404720
3 - 404720
3.1 - 921600
3.2 - 1310720
4 - 2097152
4.1 - 2097152
public void setAspectRatio(String aspectRatio)
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two groups
of settings are mutually exclusive. Do not use them together.
The display aspect ratio of the video in the output file. Valid values include:
auto, 1:1, 4:3, 3:2, 16:9
If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
aspectRatio -
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two
groups of settings are mutually exclusive. Do not use them together.
The display aspect ratio of the video in the output file. Valid values include:
auto, 1:1, 4:3, 3:2, 16:9
If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
public String getAspectRatio()
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two groups
of settings are mutually exclusive. Do not use them together.
The display aspect ratio of the video in the output file. Valid values include:
auto, 1:1, 4:3, 3:2, 16:9
If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two
groups of settings are mutually exclusive. Do not use them together.
The display aspect ratio of the video in the output file. Valid values include:
auto, 1:1, 4:3, 3:2, 16:9
If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input
file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
public VideoParameters withAspectRatio(String aspectRatio)
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two groups
of settings are mutually exclusive. Do not use them together.
The display aspect ratio of the video in the output file. Valid values include:
auto, 1:1, 4:3, 3:2, 16:9
If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
aspectRatio -
To better control resolution and aspect ratio of output videos, we recommend that you use the values
MaxWidth, MaxHeight, SizingPolicy, PaddingPolicy, and
DisplayAspectRatio instead of Resolution and AspectRatio. The two
groups of settings are mutually exclusive. Do not use them together.
The display aspect ratio of the video in the output file. Valid values include:
auto, 1:1, 4:3, 3:2, 16:9
If you specify auto, Elastic Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
public void setMaxWidth(String maxWidth)
The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920
(Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.
maxWidth - The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses
1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and
4096.public String getMaxWidth()
The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920
(Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.
auto, Elastic Transcoder
uses 1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between
128 and 4096.public VideoParameters withMaxWidth(String maxWidth)
The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses 1920
(Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and 4096.
maxWidth - The maximum width of the output video in pixels. If you specify auto, Elastic Transcoder uses
1920 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 128 and
4096.public void setMaxHeight(String maxHeight)
The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080
(Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.
maxHeight - The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder
uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96
and 3072.public String getMaxHeight()
The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080
(Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.
auto, Elastic Transcoder
uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between
96 and 3072.public VideoParameters withMaxHeight(String maxHeight)
The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder uses 1080
(Full HD) as the default value. If you specify a numeric value, enter an even integer between 96 and 3072.
maxHeight - The maximum height of the output video in pixels. If you specify auto, Elastic Transcoder
uses 1080 (Full HD) as the default value. If you specify a numeric value, enter an even integer between 96
and 3072.public void setDisplayAspectRatio(String displayAspectRatio)
The value that Elastic Transcoder adds to the metadata in the output file.
displayAspectRatio - The value that Elastic Transcoder adds to the metadata in the output file.public String getDisplayAspectRatio()
The value that Elastic Transcoder adds to the metadata in the output file.
public VideoParameters withDisplayAspectRatio(String displayAspectRatio)
The value that Elastic Transcoder adds to the metadata in the output file.
displayAspectRatio - The value that Elastic Transcoder adds to the metadata in the output file.public void setSizingPolicy(String sizingPolicy)
Specify one of the following values to control scaling of the output video:
Fit: Elastic Transcoder scales the output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the other value.
Fill: Elastic Transcoder scales the output video so it matches the value that you specified in
either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder
centers the output video and then crops it in the dimension (if any) that exceeds the maximum value.
Stretch: Elastic Transcoder stretches the output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative proportions of the input video and the output
video are different, the output video will be distorted.
Keep: Elastic Transcoder does not scale the output video. If either dimension of the input video
exceeds the values that you specified for MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.
ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the values
that you specified for at least one of MaxWidth and MaxHeight without exceeding either
value. If you specify this option, Elastic Transcoder does not scale the video up.
ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match the
values that you specified for at least one of MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder does not scale the video up.
sizingPolicy - Specify one of the following values to control scaling of the output video:
Fit: Elastic Transcoder scales the output video so it matches the value that you specified in
either MaxWidth or MaxHeight without exceeding the other value.
Fill: Elastic Transcoder scales the output video so it matches the value that you specified
in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic
Transcoder centers the output video and then crops it in the dimension (if any) that exceeds the maximum
value.
Stretch: Elastic Transcoder stretches the output video to match the values that you specified
for MaxWidth and MaxHeight. If the relative proportions of the input video and
the output video are different, the output video will be distorted.
Keep: Elastic Transcoder does not scale the output video. If either dimension of the input
video exceeds the values that you specified for MaxWidth and MaxHeight, Elastic
Transcoder crops the output video.
ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the
values that you specified for at least one of MaxWidth and MaxHeight without
exceeding either value. If you specify this option, Elastic Transcoder does not scale the video up.
ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of MaxWidth and MaxHeight without
dropping below either value. If you specify this option, Elastic Transcoder does not scale the video up.
public String getSizingPolicy()
Specify one of the following values to control scaling of the output video:
Fit: Elastic Transcoder scales the output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the other value.
Fill: Elastic Transcoder scales the output video so it matches the value that you specified in
either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder
centers the output video and then crops it in the dimension (if any) that exceeds the maximum value.
Stretch: Elastic Transcoder stretches the output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative proportions of the input video and the output
video are different, the output video will be distorted.
Keep: Elastic Transcoder does not scale the output video. If either dimension of the input video
exceeds the values that you specified for MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.
ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the values
that you specified for at least one of MaxWidth and MaxHeight without exceeding either
value. If you specify this option, Elastic Transcoder does not scale the video up.
ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match the
values that you specified for at least one of MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder does not scale the video up.
Fit: Elastic Transcoder scales the output video so it matches the value that you specified
in either MaxWidth or MaxHeight without exceeding the other value.
Fill: Elastic Transcoder scales the output video so it matches the value that you specified
in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic
Transcoder centers the output video and then crops it in the dimension (if any) that exceeds the maximum
value.
Stretch: Elastic Transcoder stretches the output video to match the values that you
specified for MaxWidth and MaxHeight. If the relative proportions of the input
video and the output video are different, the output video will be distorted.
Keep: Elastic Transcoder does not scale the output video. If either dimension of the input
video exceeds the values that you specified for MaxWidth and MaxHeight, Elastic
Transcoder crops the output video.
ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of MaxWidth and MaxHeight
without exceeding either value. If you specify this option, Elastic Transcoder does not scale the video
up.
ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of MaxWidth and MaxHeight
without dropping below either value. If you specify this option, Elastic Transcoder does not scale the
video up.
public VideoParameters withSizingPolicy(String sizingPolicy)
Specify one of the following values to control scaling of the output video:
Fit: Elastic Transcoder scales the output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the other value.
Fill: Elastic Transcoder scales the output video so it matches the value that you specified in
either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic Transcoder
centers the output video and then crops it in the dimension (if any) that exceeds the maximum value.
Stretch: Elastic Transcoder stretches the output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative proportions of the input video and the output
video are different, the output video will be distorted.
Keep: Elastic Transcoder does not scale the output video. If either dimension of the input video
exceeds the values that you specified for MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.
ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the values
that you specified for at least one of MaxWidth and MaxHeight without exceeding either
value. If you specify this option, Elastic Transcoder does not scale the video up.
ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match the
values that you specified for at least one of MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder does not scale the video up.
sizingPolicy - Specify one of the following values to control scaling of the output video:
Fit: Elastic Transcoder scales the output video so it matches the value that you specified in
either MaxWidth or MaxHeight without exceeding the other value.
Fill: Elastic Transcoder scales the output video so it matches the value that you specified
in either MaxWidth or MaxHeight and matches or exceeds the other value. Elastic
Transcoder centers the output video and then crops it in the dimension (if any) that exceeds the maximum
value.
Stretch: Elastic Transcoder stretches the output video to match the values that you specified
for MaxWidth and MaxHeight. If the relative proportions of the input video and
the output video are different, the output video will be distorted.
Keep: Elastic Transcoder does not scale the output video. If either dimension of the input
video exceeds the values that you specified for MaxWidth and MaxHeight, Elastic
Transcoder crops the output video.
ShrinkToFit: Elastic Transcoder scales the output video down so that its dimensions match the
values that you specified for at least one of MaxWidth and MaxHeight without
exceeding either value. If you specify this option, Elastic Transcoder does not scale the video up.
ShrinkToFill: Elastic Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of MaxWidth and MaxHeight without
dropping below either value. If you specify this option, Elastic Transcoder does not scale the video up.
public void setPaddingPolicy(String paddingPolicy)
When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and
bottom and/or left and right sides of the output video to make the total size of the output video match the
values that you specified for MaxWidth and MaxHeight.
paddingPolicy - When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the
top and bottom and/or left and right sides of the output video to make the total size of the output video
match the values that you specified for MaxWidth and MaxHeight.public String getPaddingPolicy()
When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and
bottom and/or left and right sides of the output video to make the total size of the output video match the
values that you specified for MaxWidth and MaxHeight.
PaddingPolicy to Pad, Elastic Transcoder may add black bars to the
top and bottom and/or left and right sides of the output video to make the total size of the output video
match the values that you specified for MaxWidth and MaxHeight.public VideoParameters withPaddingPolicy(String paddingPolicy)
When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the top and
bottom and/or left and right sides of the output video to make the total size of the output video match the
values that you specified for MaxWidth and MaxHeight.
paddingPolicy - When you set PaddingPolicy to Pad, Elastic Transcoder may add black bars to the
top and bottom and/or left and right sides of the output video to make the total size of the output video
match the values that you specified for MaxWidth and MaxHeight.public List<PresetWatermark> getWatermarks()
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos that are transcoded using this preset. You can specify settings for up to four watermarks. Watermarks appear in the specified size and location, and with the specified opacity for the duration of the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
public void setWatermarks(Collection<PresetWatermark> watermarks)
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos that are transcoded using this preset. You can specify settings for up to four watermarks. Watermarks appear in the specified size and location, and with the specified opacity for the duration of the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
watermarks - Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over
videos that are transcoded using this preset. You can specify settings for up to four watermarks.
Watermarks appear in the specified size and location, and with the specified opacity for the duration of
the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
public VideoParameters withWatermarks(PresetWatermark... watermarks)
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos that are transcoded using this preset. You can specify settings for up to four watermarks. Watermarks appear in the specified size and location, and with the specified opacity for the duration of the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
NOTE: This method appends the values to the existing list (if any). Use
setWatermarks(java.util.Collection) or withWatermarks(java.util.Collection) if you want to
override the existing values.
watermarks - Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over
videos that are transcoded using this preset. You can specify settings for up to four watermarks.
Watermarks appear in the specified size and location, and with the specified opacity for the duration of
the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
public VideoParameters withWatermarks(Collection<PresetWatermark> watermarks)
Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos that are transcoded using this preset. You can specify settings for up to four watermarks. Watermarks appear in the specified size and location, and with the specified opacity for the duration of the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
watermarks - Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over
videos that are transcoded using this preset. You can specify settings for up to four watermarks.
Watermarks appear in the specified size and location, and with the specified opacity for the duration of
the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
public String toString()
toString in class ObjectObject.toString()public VideoParameters clone()
public void marshall(ProtocolMarshaller protocolMarshaller)
marshall in interface StructuredPojoCopyright © 2019. All rights reserved.