public interface AmazonKinesisAsync extends AmazonKinesis
Amazon Kinesis is a managed service that scales elastically for real time processing of streaming big data.
Modifier and Type | Method and Description |
---|---|
Future<Void> |
addTagsToStreamAsync(AddTagsToStreamRequest addTagsToStreamRequest)
Adds or updates tags for the specified Amazon Kinesis stream.
|
Future<Void> |
addTagsToStreamAsync(AddTagsToStreamRequest addTagsToStreamRequest,
AsyncHandler<AddTagsToStreamRequest,Void> asyncHandler)
Adds or updates tags for the specified Amazon Kinesis stream.
|
Future<Void> |
createStreamAsync(CreateStreamRequest createStreamRequest)
Creates a Amazon Kinesis stream.
|
Future<Void> |
createStreamAsync(CreateStreamRequest createStreamRequest,
AsyncHandler<CreateStreamRequest,Void> asyncHandler)
Creates a Amazon Kinesis stream.
|
Future<Void> |
deleteStreamAsync(DeleteStreamRequest deleteStreamRequest)
Deletes a stream and all its shards and data.
|
Future<Void> |
deleteStreamAsync(DeleteStreamRequest deleteStreamRequest,
AsyncHandler<DeleteStreamRequest,Void> asyncHandler)
Deletes a stream and all its shards and data.
|
Future<DescribeStreamResult> |
describeStreamAsync(DescribeStreamRequest describeStreamRequest)
Describes the specified stream.
|
Future<DescribeStreamResult> |
describeStreamAsync(DescribeStreamRequest describeStreamRequest,
AsyncHandler<DescribeStreamRequest,DescribeStreamResult> asyncHandler)
Describes the specified stream.
|
Future<GetRecordsResult> |
getRecordsAsync(GetRecordsRequest getRecordsRequest)
Gets data records from a shard.
|
Future<GetRecordsResult> |
getRecordsAsync(GetRecordsRequest getRecordsRequest,
AsyncHandler<GetRecordsRequest,GetRecordsResult> asyncHandler)
Gets data records from a shard.
|
Future<GetShardIteratorResult> |
getShardIteratorAsync(GetShardIteratorRequest getShardIteratorRequest)
Gets a shard iterator in
ShardIterator . |
Future<GetShardIteratorResult> |
getShardIteratorAsync(GetShardIteratorRequest getShardIteratorRequest,
AsyncHandler<GetShardIteratorRequest,GetShardIteratorResult> asyncHandler)
Gets a shard iterator in
ShardIterator . |
Future<ListStreamsResult> |
listStreamsAsync(ListStreamsRequest listStreamsRequest)
Lists your streams.
|
Future<ListStreamsResult> |
listStreamsAsync(ListStreamsRequest listStreamsRequest,
AsyncHandler<ListStreamsRequest,ListStreamsResult> asyncHandler)
Lists your streams.
|
Future<ListTagsForStreamResult> |
listTagsForStreamAsync(ListTagsForStreamRequest listTagsForStreamRequest)
Lists the tags for the specified Amazon Kinesis stream.
|
Future<ListTagsForStreamResult> |
listTagsForStreamAsync(ListTagsForStreamRequest listTagsForStreamRequest,
AsyncHandler<ListTagsForStreamRequest,ListTagsForStreamResult> asyncHandler)
Lists the tags for the specified Amazon Kinesis stream.
|
Future<Void> |
mergeShardsAsync(MergeShardsRequest mergeShardsRequest)
Merges two adjacent shards in a stream and combines them into a
single shard to reduce the stream's capacity to ingest and transport
data.
|
Future<Void> |
mergeShardsAsync(MergeShardsRequest mergeShardsRequest,
AsyncHandler<MergeShardsRequest,Void> asyncHandler)
Merges two adjacent shards in a stream and combines them into a
single shard to reduce the stream's capacity to ingest and transport
data.
|
Future<PutRecordResult> |
putRecordAsync(PutRecordRequest putRecordRequest)
Puts a data record from a producer into an Amazon Kinesis stream.
|
Future<PutRecordResult> |
putRecordAsync(PutRecordRequest putRecordRequest,
AsyncHandler<PutRecordRequest,PutRecordResult> asyncHandler)
Puts a data record from a producer into an Amazon Kinesis stream.
|
Future<Void> |
removeTagsFromStreamAsync(RemoveTagsFromStreamRequest removeTagsFromStreamRequest)
Deletes tags from the specified Amazon Kinesis stream.
|
Future<Void> |
removeTagsFromStreamAsync(RemoveTagsFromStreamRequest removeTagsFromStreamRequest,
AsyncHandler<RemoveTagsFromStreamRequest,Void> asyncHandler)
Deletes tags from the specified Amazon Kinesis stream.
|
Future<Void> |
splitShardAsync(SplitShardRequest splitShardRequest)
Splits a shard into two new shards in the stream, to increase the
stream's capacity to ingest and transport data.
|
Future<Void> |
splitShardAsync(SplitShardRequest splitShardRequest,
AsyncHandler<SplitShardRequest,Void> asyncHandler)
Splits a shard into two new shards in the stream, to increase the
stream's capacity to ingest and transport data.
|
addTagsToStream, createStream, createStream, deleteStream, deleteStream, describeStream, describeStream, describeStream, describeStream, getCachedResponseMetadata, getRecords, getShardIterator, getShardIterator, getShardIterator, listStreams, listStreams, listStreams, listStreams, listTagsForStream, mergeShards, mergeShards, putRecord, putRecord, putRecord, removeTagsFromStream, setEndpoint, setRegion, shutdown, splitShard, splitShard
Future<DescribeStreamResult> describeStreamAsync(DescribeStreamRequest describeStreamRequest) throws AmazonServiceException, AmazonClientException
Describes the specified stream.
The information about the stream includes its current status, its Amazon Resource Name (ARN), and an array of shard objects. For each shard object, there is information about the hash key and sequence number ranges that the shard spans, and the IDs of any earlier shards that played in a role in creating the shard. A sequence number is the identifier associated with every record ingested in the Amazon Kinesis stream. The sequence number is assigned when a record is put into the stream.
You can limit the number of returned shards using the
Limit
parameter. The number of shards in a stream may be
too large to return from a single call to DescribeStream
. You can detect this by using the HasMoreShards
flag in
the returned output. HasMoreShards
is set to
true
when there is more data available.
DescribeStream
is a paginated operation. If there are
more shards available, you can request them using the shard ID of the
last shard returned. Specify this ID in the
ExclusiveStartShardId
parameter in a subsequent request
to DescribeStream
.
DescribeStream
has a limit of 10 transactions per second
per account.
describeStreamRequest
- Container for the necessary parameters to
execute the DescribeStream operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<DescribeStreamResult> describeStreamAsync(DescribeStreamRequest describeStreamRequest, AsyncHandler<DescribeStreamRequest,DescribeStreamResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Describes the specified stream.
The information about the stream includes its current status, its Amazon Resource Name (ARN), and an array of shard objects. For each shard object, there is information about the hash key and sequence number ranges that the shard spans, and the IDs of any earlier shards that played in a role in creating the shard. A sequence number is the identifier associated with every record ingested in the Amazon Kinesis stream. The sequence number is assigned when a record is put into the stream.
You can limit the number of returned shards using the
Limit
parameter. The number of shards in a stream may be
too large to return from a single call to DescribeStream
. You can detect this by using the HasMoreShards
flag in
the returned output. HasMoreShards
is set to
true
when there is more data available.
DescribeStream
is a paginated operation. If there are
more shards available, you can request them using the shard ID of the
last shard returned. Specify this ID in the
ExclusiveStartShardId
parameter in a subsequent request
to DescribeStream
.
DescribeStream
has a limit of 10 transactions per second
per account.
describeStreamRequest
- Container for the necessary parameters to
execute the DescribeStream operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> addTagsToStreamAsync(AddTagsToStreamRequest addTagsToStreamRequest) throws AmazonServiceException, AmazonClientException
Adds or updates tags for the specified Amazon Kinesis stream. Each stream can have up to 10 tags.
If tags have already been assigned to the stream,
AddTagsToStream
overwrites any existing tags that
correspond to the specified tag keys.
addTagsToStreamRequest
- Container for the necessary parameters
to execute the AddTagsToStream operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> addTagsToStreamAsync(AddTagsToStreamRequest addTagsToStreamRequest, AsyncHandler<AddTagsToStreamRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
Adds or updates tags for the specified Amazon Kinesis stream. Each stream can have up to 10 tags.
If tags have already been assigned to the stream,
AddTagsToStream
overwrites any existing tags that
correspond to the specified tag keys.
addTagsToStreamRequest
- Container for the necessary parameters
to execute the AddTagsToStream operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<GetShardIteratorResult> getShardIteratorAsync(GetShardIteratorRequest getShardIteratorRequest) throws AmazonServiceException, AmazonClientException
Gets a shard iterator in ShardIterator
. The shard
iterator specifies the position in the shard from which you want to
start reading data records sequentially. A shard iterator specifies
this position using the sequence number of a data record in a shard. A
sequence number is the identifier associated with every record
ingested in the Amazon Kinesis stream. The sequence number is assigned
when a record is put into the stream.
You must specify the shard iterator type. For example, you can set
the ShardIteratorType
parameter to read exactly from the
position denoted by a specific sequence number by using the
AT_SEQUENCE_NUMBER
shard iterator type, or right after
the sequence number by using the AFTER_SEQUENCE_NUMBER
shard iterator type, using sequence numbers returned by earlier
PutRecord, GetRecords or DescribeStream requests. You can specify the
shard iterator type TRIM_HORIZON in the request to cause
ShardIterator
to point to the last untrimmed record in
the shard in the system, which is the oldest data record in the shard.
Or you can point to just after the most recent record in the shard, by
using the shard iterator type LATEST, so that you always read the most
recent data in the shard.
Note: Each shard iterator expires five minutes after it is returned to the requester.
When you repeatedly read from an Amazon Kinesis stream use a
GetShardIterator request to get the first shard iterator to to use in
your first GetRecords
request and then use the shard
iterator returned by the GetRecords
request in
NextShardIterator
for subsequent reads. A new shard
iterator is returned by every GetRecords
request in
NextShardIterator
, which you use in the
ShardIterator
parameter of the next
GetRecords
request.
If a GetShardIterator
request is made too often, you
will receive a ProvisionedThroughputExceededException
.
For more information about throughput limits, see the
Amazon Kinesis Developer Guide
.
GetShardIterator
can return null
for its
ShardIterator
to indicate that the shard has been closed
and that the requested iterator will return no more data. A shard can
be closed by SplitShard or MergeShards.
GetShardIterator
has a limit of 5 transactions per
second per account per open shard.
getShardIteratorRequest
- Container for the necessary parameters
to execute the GetShardIterator operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<GetShardIteratorResult> getShardIteratorAsync(GetShardIteratorRequest getShardIteratorRequest, AsyncHandler<GetShardIteratorRequest,GetShardIteratorResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Gets a shard iterator in ShardIterator
. The shard
iterator specifies the position in the shard from which you want to
start reading data records sequentially. A shard iterator specifies
this position using the sequence number of a data record in a shard. A
sequence number is the identifier associated with every record
ingested in the Amazon Kinesis stream. The sequence number is assigned
when a record is put into the stream.
You must specify the shard iterator type. For example, you can set
the ShardIteratorType
parameter to read exactly from the
position denoted by a specific sequence number by using the
AT_SEQUENCE_NUMBER
shard iterator type, or right after
the sequence number by using the AFTER_SEQUENCE_NUMBER
shard iterator type, using sequence numbers returned by earlier
PutRecord, GetRecords or DescribeStream requests. You can specify the
shard iterator type TRIM_HORIZON in the request to cause
ShardIterator
to point to the last untrimmed record in
the shard in the system, which is the oldest data record in the shard.
Or you can point to just after the most recent record in the shard, by
using the shard iterator type LATEST, so that you always read the most
recent data in the shard.
Note: Each shard iterator expires five minutes after it is returned to the requester.
When you repeatedly read from an Amazon Kinesis stream use a
GetShardIterator request to get the first shard iterator to to use in
your first GetRecords
request and then use the shard
iterator returned by the GetRecords
request in
NextShardIterator
for subsequent reads. A new shard
iterator is returned by every GetRecords
request in
NextShardIterator
, which you use in the
ShardIterator
parameter of the next
GetRecords
request.
If a GetShardIterator
request is made too often, you
will receive a ProvisionedThroughputExceededException
.
For more information about throughput limits, see the
Amazon Kinesis Developer Guide
.
GetShardIterator
can return null
for its
ShardIterator
to indicate that the shard has been closed
and that the requested iterator will return no more data. A shard can
be closed by SplitShard or MergeShards.
GetShardIterator
has a limit of 5 transactions per
second per account per open shard.
getShardIteratorRequest
- Container for the necessary parameters
to execute the GetShardIterator operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<PutRecordResult> putRecordAsync(PutRecordRequest putRecordRequest) throws AmazonServiceException, AmazonClientException
Puts a data record from a producer into an Amazon Kinesis stream. You
must call PutRecord
to send data from the producer into
the Amazon Kinesis stream for real-time ingestion and subsequent
processing. You must specify the name of the stream that captures,
stores, and transports the data; a partition key; and the data blob
itself. The data blob could be a segment from a log file,
geographic/location data, website clickstream data, or any other data
type.
The partition key is used to distribute data across shards. Amazon Kinesis segregates the data records that belong to a data stream into multiple shards, using the partition key associated with each data record to determine which shard a given data record belongs to.
Partition keys are Unicode strings, with a maximum length limit of
256 bytes. An MD5 hash function is used to map partition keys to
128-bit integer values and to map associated data records to shards
using the hash key ranges of the shards. You can override hashing the
partition key to determine the shard by explicitly specifying a hash
value using the ExplicitHashKey
parameter. For more
information, see the
Amazon Kinesis Developer Guide
.
PutRecord
returns the shard ID of where the data record
was placed and the sequence number that was assigned to the data
record.
Sequence numbers generally increase over time. To guarantee strictly
increasing ordering, use the SequenceNumberForOrdering
parameter. For more information, see the
Amazon Kinesis Developer Guide
.
If a PutRecord
request cannot be processed because of
insufficient provisioned throughput on the shard involved in the
request, PutRecord
throws
ProvisionedThroughputExceededException
.
Data records are accessible for only 24 hours from the time that they are added to an Amazon Kinesis stream.
putRecordRequest
- Container for the necessary parameters to
execute the PutRecord operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<PutRecordResult> putRecordAsync(PutRecordRequest putRecordRequest, AsyncHandler<PutRecordRequest,PutRecordResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Puts a data record from a producer into an Amazon Kinesis stream. You
must call PutRecord
to send data from the producer into
the Amazon Kinesis stream for real-time ingestion and subsequent
processing. You must specify the name of the stream that captures,
stores, and transports the data; a partition key; and the data blob
itself. The data blob could be a segment from a log file,
geographic/location data, website clickstream data, or any other data
type.
The partition key is used to distribute data across shards. Amazon Kinesis segregates the data records that belong to a data stream into multiple shards, using the partition key associated with each data record to determine which shard a given data record belongs to.
Partition keys are Unicode strings, with a maximum length limit of
256 bytes. An MD5 hash function is used to map partition keys to
128-bit integer values and to map associated data records to shards
using the hash key ranges of the shards. You can override hashing the
partition key to determine the shard by explicitly specifying a hash
value using the ExplicitHashKey
parameter. For more
information, see the
Amazon Kinesis Developer Guide
.
PutRecord
returns the shard ID of where the data record
was placed and the sequence number that was assigned to the data
record.
Sequence numbers generally increase over time. To guarantee strictly
increasing ordering, use the SequenceNumberForOrdering
parameter. For more information, see the
Amazon Kinesis Developer Guide
.
If a PutRecord
request cannot be processed because of
insufficient provisioned throughput on the shard involved in the
request, PutRecord
throws
ProvisionedThroughputExceededException
.
Data records are accessible for only 24 hours from the time that they are added to an Amazon Kinesis stream.
putRecordRequest
- Container for the necessary parameters to
execute the PutRecord operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<ListTagsForStreamResult> listTagsForStreamAsync(ListTagsForStreamRequest listTagsForStreamRequest) throws AmazonServiceException, AmazonClientException
Lists the tags for the specified Amazon Kinesis stream.
listTagsForStreamRequest
- Container for the necessary parameters
to execute the ListTagsForStream operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<ListTagsForStreamResult> listTagsForStreamAsync(ListTagsForStreamRequest listTagsForStreamRequest, AsyncHandler<ListTagsForStreamRequest,ListTagsForStreamResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Lists the tags for the specified Amazon Kinesis stream.
listTagsForStreamRequest
- Container for the necessary parameters
to execute the ListTagsForStream operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<GetRecordsResult> getRecordsAsync(GetRecordsRequest getRecordsRequest) throws AmazonServiceException, AmazonClientException
Gets data records from a shard.
You specify a shard iterator for the shard using the
ShardIterator
parameter. The shard iterator specifies the
position in the shard from which you want to start reading data
records sequentially. GetRecords
returns a new shard
iterator in NextShardIterator
. If the shard has been
closed, the shard iterator can't return more data and
GetRecords
returns null
in
NextShardIterator
. To read from an Amazon Kinesis stream
continually, use GetShardIterator to get the shard iterator to specify
in the first GetRecords
call, and then specify the shard
iterator returned in NextShardIterator
in subsequent
calls.
If there are no records available, GetRecords
returns an
empty list.
The size of the data returned by GetRecords
will vary,
but the maximum size is 10 MB. Each data record can be up to 50 KB in
size, and each shard can read up to 2 MB per second. You can ensure
that your calls don't exceed the maximum size or throughput by using
the Limit
parameter to specify the maximum number of
records that GetRecords
can return. Consider your average
record size when specifying a limit. For example, if your average
record size is 40 KB, you can limit the data returned to about 1 MB
per call using a limit of 25.
If there is insufficient provisioned throughput on the shard involved
in the request, subsequent calls to GetRecords
made
within the next one second throw
ProvisionedThroughputExceededException
.
GetRecords
won't return data when it throws an exception,
so wait one second before making another call or the application won't
get any records. Also, you can scale by provisioning multiple shards.
To detect whether you are falling behind in processing, add a timestamp to your records and note how long it takes to process them.
getRecordsRequest
- Container for the necessary parameters to
execute the GetRecords operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<GetRecordsResult> getRecordsAsync(GetRecordsRequest getRecordsRequest, AsyncHandler<GetRecordsRequest,GetRecordsResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Gets data records from a shard.
You specify a shard iterator for the shard using the
ShardIterator
parameter. The shard iterator specifies the
position in the shard from which you want to start reading data
records sequentially. GetRecords
returns a new shard
iterator in NextShardIterator
. If the shard has been
closed, the shard iterator can't return more data and
GetRecords
returns null
in
NextShardIterator
. To read from an Amazon Kinesis stream
continually, use GetShardIterator to get the shard iterator to specify
in the first GetRecords
call, and then specify the shard
iterator returned in NextShardIterator
in subsequent
calls.
If there are no records available, GetRecords
returns an
empty list.
The size of the data returned by GetRecords
will vary,
but the maximum size is 10 MB. Each data record can be up to 50 KB in
size, and each shard can read up to 2 MB per second. You can ensure
that your calls don't exceed the maximum size or throughput by using
the Limit
parameter to specify the maximum number of
records that GetRecords
can return. Consider your average
record size when specifying a limit. For example, if your average
record size is 40 KB, you can limit the data returned to about 1 MB
per call using a limit of 25.
If there is insufficient provisioned throughput on the shard involved
in the request, subsequent calls to GetRecords
made
within the next one second throw
ProvisionedThroughputExceededException
.
GetRecords
won't return data when it throws an exception,
so wait one second before making another call or the application won't
get any records. Also, you can scale by provisioning multiple shards.
To detect whether you are falling behind in processing, add a timestamp to your records and note how long it takes to process them.
getRecordsRequest
- Container for the necessary parameters to
execute the GetRecords operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> splitShardAsync(SplitShardRequest splitShardRequest) throws AmazonServiceException, AmazonClientException
Splits a shard into two new shards in the stream, to increase the
stream's capacity to ingest and transport data.
SplitShard
is called when there is a need to increase the
overall capacity of stream because of an expected increase in the
volume of data records being ingested.
You can also use SplitShard
when a shard appears to be
approaching its maximum utilization, for example, when the set of
producers sending data into the specific shard are suddenly sending
more than previously anticipated. You can also call
SplitShard
to increase stream capacity, so that more
Amazon Kinesis applications can simultaneously read data from the
stream for real-time processing.
You must specify the shard to be split and the new hash key, which is the position in the shard where the shard gets split in two. In many cases, the new hash key might simply be the average of the beginning and ending hash key, but it can be any hash key value in the range being mapped into the shard. For more information about splitting shards, see the Amazon Kinesis Developer Guide .
You can use DescribeStream to determine the shard ID and hash key
values for the ShardToSplit
and
NewStartingHashKey
parameters that are specified in the
SplitShard
request.
SplitShard
is an asynchronous operation. Upon receiving
a SplitShard
request, Amazon Kinesis immediately returns
a response and sets the stream status to UPDATING
. After
the operation is completed, Amazon Kinesis sets the stream status to
ACTIVE
. Read and write operations continue to work while
the stream is in the UPDATING
state.
You can use DescribeStream
to check the status of the
stream, which is returned in StreamStatus
. If the stream
is in the ACTIVE
state, you can call
SplitShard
. If a stream is in CREATING
or
UPDATING
or DELETING
states,
DescribeStream
returns a
ResourceInUseException
.
If the specified stream does not exist, DescribeStream
returns a ResourceNotFoundException
. If you try to
create more shards than are authorized for your account, you receive a
LimitExceededException
.
The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account.
If you try to operate on too many streams in parallel using
CreateStream, DeleteStream, MergeShards or SplitShard, you receive a
LimitExceededException
.
SplitShard
has limit of 5 transactions per second per
account.
splitShardRequest
- Container for the necessary parameters to
execute the SplitShard operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> splitShardAsync(SplitShardRequest splitShardRequest, AsyncHandler<SplitShardRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
Splits a shard into two new shards in the stream, to increase the
stream's capacity to ingest and transport data.
SplitShard
is called when there is a need to increase the
overall capacity of stream because of an expected increase in the
volume of data records being ingested.
You can also use SplitShard
when a shard appears to be
approaching its maximum utilization, for example, when the set of
producers sending data into the specific shard are suddenly sending
more than previously anticipated. You can also call
SplitShard
to increase stream capacity, so that more
Amazon Kinesis applications can simultaneously read data from the
stream for real-time processing.
You must specify the shard to be split and the new hash key, which is the position in the shard where the shard gets split in two. In many cases, the new hash key might simply be the average of the beginning and ending hash key, but it can be any hash key value in the range being mapped into the shard. For more information about splitting shards, see the Amazon Kinesis Developer Guide .
You can use DescribeStream to determine the shard ID and hash key
values for the ShardToSplit
and
NewStartingHashKey
parameters that are specified in the
SplitShard
request.
SplitShard
is an asynchronous operation. Upon receiving
a SplitShard
request, Amazon Kinesis immediately returns
a response and sets the stream status to UPDATING
. After
the operation is completed, Amazon Kinesis sets the stream status to
ACTIVE
. Read and write operations continue to work while
the stream is in the UPDATING
state.
You can use DescribeStream
to check the status of the
stream, which is returned in StreamStatus
. If the stream
is in the ACTIVE
state, you can call
SplitShard
. If a stream is in CREATING
or
UPDATING
or DELETING
states,
DescribeStream
returns a
ResourceInUseException
.
If the specified stream does not exist, DescribeStream
returns a ResourceNotFoundException
. If you try to
create more shards than are authorized for your account, you receive a
LimitExceededException
.
The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account.
If you try to operate on too many streams in parallel using
CreateStream, DeleteStream, MergeShards or SplitShard, you receive a
LimitExceededException
.
SplitShard
has limit of 5 transactions per second per
account.
splitShardRequest
- Container for the necessary parameters to
execute the SplitShard operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> createStreamAsync(CreateStreamRequest createStreamRequest) throws AmazonServiceException, AmazonClientException
Creates a Amazon Kinesis stream. A stream captures and transports data records that are continuously emitted from different data sources or producers . Scale-out within an Amazon Kinesis stream is explicitly supported by means of shards, which are uniquely identified groups of data records in an Amazon Kinesis stream.
You specify and control the number of shards that a stream is composed of. Each open shard can support up to 5 read transactions per second, up to a maximum total of 2 MB of data read per second. Each shard can support up to 1000 write transactions per second, up to a maximum total of 1 MB data written per second. You can add shards to a stream if the amount of data input increases and you can remove shards if the amount of data input decreases.
The stream name identifies the stream. The name is scoped to the AWS account used by the application. It is also scoped by region. That is, two streams in two different accounts can have the same name, and two streams in the same account, but in two different regions, can have the same name.
CreateStream
is an asynchronous operation. Upon
receiving a CreateStream
request, Amazon Kinesis
immediately returns and sets the stream status to
CREATING
. After the stream is created, Amazon Kinesis
sets the stream status to ACTIVE
. You should perform
read and write operations only on an ACTIVE
stream.
You receive a LimitExceededException
when making a
CreateStream
request if you try to do one of the
following:
CREATING
state at
any point in time.The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account.
You can use DescribeStream
to check the stream status,
which is returned in StreamStatus
.
CreateStream
has a limit of 5 transactions per second
per account.
createStreamRequest
- Container for the necessary parameters to
execute the CreateStream operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> createStreamAsync(CreateStreamRequest createStreamRequest, AsyncHandler<CreateStreamRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
Creates a Amazon Kinesis stream. A stream captures and transports data records that are continuously emitted from different data sources or producers . Scale-out within an Amazon Kinesis stream is explicitly supported by means of shards, which are uniquely identified groups of data records in an Amazon Kinesis stream.
You specify and control the number of shards that a stream is composed of. Each open shard can support up to 5 read transactions per second, up to a maximum total of 2 MB of data read per second. Each shard can support up to 1000 write transactions per second, up to a maximum total of 1 MB data written per second. You can add shards to a stream if the amount of data input increases and you can remove shards if the amount of data input decreases.
The stream name identifies the stream. The name is scoped to the AWS account used by the application. It is also scoped by region. That is, two streams in two different accounts can have the same name, and two streams in the same account, but in two different regions, can have the same name.
CreateStream
is an asynchronous operation. Upon
receiving a CreateStream
request, Amazon Kinesis
immediately returns and sets the stream status to
CREATING
. After the stream is created, Amazon Kinesis
sets the stream status to ACTIVE
. You should perform
read and write operations only on an ACTIVE
stream.
You receive a LimitExceededException
when making a
CreateStream
request if you try to do one of the
following:
CREATING
state at
any point in time.The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account.
You can use DescribeStream
to check the stream status,
which is returned in StreamStatus
.
CreateStream
has a limit of 5 transactions per second
per account.
createStreamRequest
- Container for the necessary parameters to
execute the CreateStream operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> removeTagsFromStreamAsync(RemoveTagsFromStreamRequest removeTagsFromStreamRequest) throws AmazonServiceException, AmazonClientException
Deletes tags from the specified Amazon Kinesis stream.
If you specify a tag that does not exist, it is ignored.
removeTagsFromStreamRequest
- Container for the necessary
parameters to execute the RemoveTagsFromStream operation on
AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> removeTagsFromStreamAsync(RemoveTagsFromStreamRequest removeTagsFromStreamRequest, AsyncHandler<RemoveTagsFromStreamRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
Deletes tags from the specified Amazon Kinesis stream.
If you specify a tag that does not exist, it is ignored.
removeTagsFromStreamRequest
- Container for the necessary
parameters to execute the RemoveTagsFromStream operation on
AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> deleteStreamAsync(DeleteStreamRequest deleteStreamRequest) throws AmazonServiceException, AmazonClientException
Deletes a stream and all its shards and data. You must shut down any
applications that are operating on the stream before you delete the
stream. If an application attempts to operate on a deleted stream, it
will receive the exception ResourceNotFoundException
.
If the stream is in the ACTIVE
state, you can delete it.
After a DeleteStream
request, the specified stream is in
the DELETING
state until Amazon Kinesis completes the
deletion.
Note: Amazon Kinesis might continue to accept data read and
write operations, such as PutRecord and GetRecords, on a stream in the
DELETING
state until the stream deletion is complete.
When you delete a stream, any shards in that stream are also deleted, and any tags are dissociated from the stream.
You can use the DescribeStream operation to check the state of the
stream, which is returned in StreamStatus
.
DeleteStream
has a limit of 5 transactions per second
per account.
deleteStreamRequest
- Container for the necessary parameters to
execute the DeleteStream operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> deleteStreamAsync(DeleteStreamRequest deleteStreamRequest, AsyncHandler<DeleteStreamRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
Deletes a stream and all its shards and data. You must shut down any
applications that are operating on the stream before you delete the
stream. If an application attempts to operate on a deleted stream, it
will receive the exception ResourceNotFoundException
.
If the stream is in the ACTIVE
state, you can delete it.
After a DeleteStream
request, the specified stream is in
the DELETING
state until Amazon Kinesis completes the
deletion.
Note: Amazon Kinesis might continue to accept data read and
write operations, such as PutRecord and GetRecords, on a stream in the
DELETING
state until the stream deletion is complete.
When you delete a stream, any shards in that stream are also deleted, and any tags are dissociated from the stream.
You can use the DescribeStream operation to check the state of the
stream, which is returned in StreamStatus
.
DeleteStream
has a limit of 5 transactions per second
per account.
deleteStreamRequest
- Container for the necessary parameters to
execute the DeleteStream operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<ListStreamsResult> listStreamsAsync(ListStreamsRequest listStreamsRequest) throws AmazonServiceException, AmazonClientException
Lists your streams.
The number of streams may be too large to return from a single call
to ListStreams
. You can limit the number of returned
streams using the Limit
parameter. If you do not specify
a value for the Limit
parameter, Amazon Kinesis uses the
default limit, which is currently 10.
You can detect if there are more streams available to list by using
the HasMoreStreams
flag from the returned output. If
there are more streams available, you can request more streams by
using the name of the last stream returned by the
ListStreams
request in the
ExclusiveStartStreamName
parameter in a subsequent
request to ListStreams
. The group of stream names
returned by the subsequent request is then added to the list. You can
continue this process until all the stream names have been collected
in the list.
ListStreams
has a limit of 5 transactions per second per
account.
listStreamsRequest
- Container for the necessary parameters to
execute the ListStreams operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<ListStreamsResult> listStreamsAsync(ListStreamsRequest listStreamsRequest, AsyncHandler<ListStreamsRequest,ListStreamsResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Lists your streams.
The number of streams may be too large to return from a single call
to ListStreams
. You can limit the number of returned
streams using the Limit
parameter. If you do not specify
a value for the Limit
parameter, Amazon Kinesis uses the
default limit, which is currently 10.
You can detect if there are more streams available to list by using
the HasMoreStreams
flag from the returned output. If
there are more streams available, you can request more streams by
using the name of the last stream returned by the
ListStreams
request in the
ExclusiveStartStreamName
parameter in a subsequent
request to ListStreams
. The group of stream names
returned by the subsequent request is then added to the list. You can
continue this process until all the stream names have been collected
in the list.
ListStreams
has a limit of 5 transactions per second per
account.
listStreamsRequest
- Container for the necessary parameters to
execute the ListStreams operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> mergeShardsAsync(MergeShardsRequest mergeShardsRequest) throws AmazonServiceException, AmazonClientException
Merges two adjacent shards in a stream and combines them into a single shard to reduce the stream's capacity to ingest and transport data. Two shards are considered adjacent if the union of the hash key ranges for the two shards form a contiguous set with no gaps. For example, if you have two shards, one with a hash key range of 276...381 and the other with a hash key range of 382...454, then you could merge these two shards into a single shard that would have a hash key range of 276...454. After the merge, the single child shard receives data for all hash key values covered by the two parent shards.
MergeShards
is called when there is a need to reduce the
overall capacity of a stream because of excess capacity that is not
being used. You must specify the shard to be merged and the adjacent
shard for a stream. For more information about merging shards, see the
Amazon Kinesis Developer Guide
.
If the stream is in the ACTIVE
state, you can call
MergeShards
. If a stream is in the CREATING
, UPDATING
, or DELETING
state,
MergeShards
returns a ResourceInUseException
. If the specified stream does not exist, MergeShards
returns a ResourceNotFoundException
.
You can use DescribeStream to check the state of the stream, which is
returned in StreamStatus
.
MergeShards
is an asynchronous operation. Upon receiving
a MergeShards
request, Amazon Kinesis immediately returns
a response and sets the StreamStatus
to
UPDATING
. After the operation is completed, Amazon
Kinesis sets the StreamStatus
to ACTIVE
.
Read and write operations continue to work while the stream is in the
UPDATING
state.
You use DescribeStream to determine the shard IDs that are specified
in the MergeShards
request.
If you try to operate on too many streams in parallel using
CreateStream, DeleteStream, MergeShards
or SplitShard,
you will receive a LimitExceededException
.
MergeShards
has limit of 5 transactions per second per
account.
mergeShardsRequest
- Container for the necessary parameters to
execute the MergeShards operation on AmazonKinesis.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Future<Void> mergeShardsAsync(MergeShardsRequest mergeShardsRequest, AsyncHandler<MergeShardsRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
Merges two adjacent shards in a stream and combines them into a single shard to reduce the stream's capacity to ingest and transport data. Two shards are considered adjacent if the union of the hash key ranges for the two shards form a contiguous set with no gaps. For example, if you have two shards, one with a hash key range of 276...381 and the other with a hash key range of 382...454, then you could merge these two shards into a single shard that would have a hash key range of 276...454. After the merge, the single child shard receives data for all hash key values covered by the two parent shards.
MergeShards
is called when there is a need to reduce the
overall capacity of a stream because of excess capacity that is not
being used. You must specify the shard to be merged and the adjacent
shard for a stream. For more information about merging shards, see the
Amazon Kinesis Developer Guide
.
If the stream is in the ACTIVE
state, you can call
MergeShards
. If a stream is in the CREATING
, UPDATING
, or DELETING
state,
MergeShards
returns a ResourceInUseException
. If the specified stream does not exist, MergeShards
returns a ResourceNotFoundException
.
You can use DescribeStream to check the state of the stream, which is
returned in StreamStatus
.
MergeShards
is an asynchronous operation. Upon receiving
a MergeShards
request, Amazon Kinesis immediately returns
a response and sets the StreamStatus
to
UPDATING
. After the operation is completed, Amazon
Kinesis sets the StreamStatus
to ACTIVE
.
Read and write operations continue to work while the stream is in the
UPDATING
state.
You use DescribeStream to determine the shard IDs that are specified
in the MergeShards
request.
If you try to operate on too many streams in parallel using
CreateStream, DeleteStream, MergeShards
or SplitShard,
you will receive a LimitExceededException
.
MergeShards
has limit of 5 transactions per second per
account.
mergeShardsRequest
- Container for the necessary parameters to
execute the MergeShards operation on AmazonKinesis.asyncHandler
- Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException
- If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException
- If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Copyright © 2014. All rights reserved.