public class VideoParameters extends Object implements Serializable, Cloneable
The VideoParameters structure.
| Constructor and Description |
|---|
VideoParameters() |
| Modifier and Type | Method and Description |
|---|---|
VideoParameters |
addCodecOptionsEntry(String key,
String value)
Profile (H.264/VP8 Only)
|
VideoParameters |
clearCodecOptionsEntries()
Removes all the entries added into CodecOptions.
|
VideoParameters |
clone() |
boolean |
equals(Object obj) |
String |
getAspectRatio()
|
String |
getBitRate()
The bit rate of the video stream in the output file, in
kilobits/second.
|
String |
getCodec()
The video codec for the output file.
|
Map<String,String> |
getCodecOptions()
Profile (H.264/VP8 Only)
|
String |
getDisplayAspectRatio()
The value that Elastic Transcoder adds to the metadata in the output
file.
|
String |
getFixedGOP()
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8. |
String |
getFrameRate()
The frames per second for the video stream in the output file.
|
String |
getKeyframesMaxDist()
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8. |
String |
getMaxFrameRate()
If you specify
auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. |
String |
getMaxHeight()
The maximum height of the output video in pixels.
|
String |
getMaxWidth()
The maximum width of the output video in pixels.
|
String |
getPaddingPolicy()
When you set
PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight. |
String |
getResolution()
|
String |
getSizingPolicy()
Specify one of the following values to control scaling of the output
video:
|
List<PresetWatermark> |
getWatermarks()
Settings for the size, location, and opacity of graphics that you want
Elastic Transcoder to overlay over videos that are transcoded using
this preset.
|
int |
hashCode() |
void |
setAspectRatio(String aspectRatio)
|
void |
setBitRate(String bitRate)
The bit rate of the video stream in the output file, in
kilobits/second.
|
void |
setCodec(String codec)
The video codec for the output file.
|
void |
setCodecOptions(Map<String,String> codecOptions)
Profile (H.264/VP8 Only)
|
void |
setDisplayAspectRatio(String displayAspectRatio)
The value that Elastic Transcoder adds to the metadata in the output
file.
|
void |
setFixedGOP(String fixedGOP)
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8. |
void |
setFrameRate(String frameRate)
The frames per second for the video stream in the output file.
|
void |
setKeyframesMaxDist(String keyframesMaxDist)
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8. |
void |
setMaxFrameRate(String maxFrameRate)
If you specify
auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. |
void |
setMaxHeight(String maxHeight)
The maximum height of the output video in pixels.
|
void |
setMaxWidth(String maxWidth)
The maximum width of the output video in pixels.
|
void |
setPaddingPolicy(String paddingPolicy)
When you set
PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight. |
void |
setResolution(String resolution)
|
void |
setSizingPolicy(String sizingPolicy)
Specify one of the following values to control scaling of the output
video:
|
void |
setWatermarks(Collection<PresetWatermark> watermarks)
Settings for the size, location, and opacity of graphics that you want
Elastic Transcoder to overlay over videos that are transcoded using
this preset.
|
String |
toString()
Returns a string representation of this object; useful for testing and
debugging.
|
VideoParameters |
withAspectRatio(String aspectRatio)
|
VideoParameters |
withBitRate(String bitRate)
The bit rate of the video stream in the output file, in
kilobits/second.
|
VideoParameters |
withCodec(String codec)
The video codec for the output file.
|
VideoParameters |
withCodecOptions(Map<String,String> codecOptions)
Profile (H.264/VP8 Only)
|
VideoParameters |
withDisplayAspectRatio(String displayAspectRatio)
The value that Elastic Transcoder adds to the metadata in the output
file.
|
VideoParameters |
withFixedGOP(String fixedGOP)
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8. |
VideoParameters |
withFrameRate(String frameRate)
The frames per second for the video stream in the output file.
|
VideoParameters |
withKeyframesMaxDist(String keyframesMaxDist)
Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8. |
VideoParameters |
withMaxFrameRate(String maxFrameRate)
If you specify
auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. |
VideoParameters |
withMaxHeight(String maxHeight)
The maximum height of the output video in pixels.
|
VideoParameters |
withMaxWidth(String maxWidth)
The maximum width of the output video in pixels.
|
VideoParameters |
withPaddingPolicy(String paddingPolicy)
When you set
PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight. |
VideoParameters |
withResolution(String resolution)
|
VideoParameters |
withSizingPolicy(String sizingPolicy)
Specify one of the following values to control scaling of the output
video:
|
VideoParameters |
withWatermarks(Collection<PresetWatermark> watermarks)
Settings for the size, location, and opacity of graphics that you want
Elastic Transcoder to overlay over videos that are transcoded using
this preset.
|
VideoParameters |
withWatermarks(PresetWatermark... watermarks)
Settings for the size, location, and opacity of graphics that you want
Elastic Transcoder to overlay over videos that are transcoded using
this preset.
|
public String getCodec()
gif, H.264, mpeg2, and
vp8. You can only specify vp8 when the
container type is webm, gif when the
container type is gif, and mpeg2 when the
container type is mpg.
Constraints:
Pattern: (^H\.264$)|(^vp8$)|(^mpeg2$)|(^gif$)
gif, H.264, mpeg2, and
vp8. You can only specify vp8 when the
container type is webm, gif when the
container type is gif, and mpeg2 when the
container type is mpg.public void setCodec(String codec)
gif, H.264, mpeg2, and
vp8. You can only specify vp8 when the
container type is webm, gif when the
container type is gif, and mpeg2 when the
container type is mpg.
Constraints:
Pattern: (^H\.264$)|(^vp8$)|(^mpeg2$)|(^gif$)
codec - The video codec for the output file. Valid values include
gif, H.264, mpeg2, and
vp8. You can only specify vp8 when the
container type is webm, gif when the
container type is gif, and mpeg2 when the
container type is mpg.public VideoParameters withCodec(String codec)
gif, H.264, mpeg2, and
vp8. You can only specify vp8 when the
container type is webm, gif when the
container type is gif, and mpeg2 when the
container type is mpg.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^H\.264$)|(^vp8$)|(^mpeg2$)|(^gif$)
codec - The video codec for the output file. Valid values include
gif, H.264, mpeg2, and
vp8. You can only specify vp8 when the
container type is webm, gif when the
container type is gif, and mpeg2 when the
container type is mpg.public Map<String,String> getCodecOptions()
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly
used for videoconferencing and for mobile applications.main: The profile used for standard-definition
digital TV broadcasts.high: The profile used
for high-definition digital TV broadcasts and for Blu-ray discs.Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1,
1.2, 1.3, 2, 2.1,
2.2, 3, 3.1, 3.2,
4, 4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks *
256 / (Width in pixels * Height in pixels)), 16)
where
Width in pixels and Height in pixels represent either
MaxWidth and MaxHeight, or Resolution. Maximum decoded picture
buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a
block of pixels measuring 16x16.)
MaxBitRate (Optional, H.264/MPEG2/VP8 only)
The maximum number of bits per second in
a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You
can reduce the bandwidth required to stream a video by reducing the
maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8 only)
The maximum
number of bits in any x seconds of the output video. This window is
commonly 10 seconds, the standard segment duration when you're using
FMP4 or MPEG-TS for the container type of the output video. Specify an
integer greater than 0. If you specify MaxBitRate and
omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of
MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid
values include Progressive (no interlacing, top to
bottom), TopFirst (top field first),
BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder
uses Progressive for the output. If Auto is
specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The
color space conversion Elastic Transcoder applies to the output video.
Color spaces are the algorithms used by the computer to store
information about how to render color. Bt.601 is the
standard for standard definition video, while Bt.709 is
the standard for high definition video.
Valid values include
None, Bt709toBt601,
Bt601toBt709, and Auto.
If you chose
Auto for ColorSpaceConversionMode and your
output is interlaced, your frame rate is one of 23.97,
24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you
are using one of the resolution changes from the list below, Elastic
Transcoder applies the following color space conversions:
Bt601ToBt709Bt601ToBt709Bt709ToBt601Bt709ToBt601ColorspaceConversionMode
Auto mode in the future. All outputs in a playlist must
use the same ColorSpaceConversionMode.If you
do not specify a ColorSpaceConversionMode, Elastic
Transcoder does not change the color space of a file. If you are
unsure what ColorSpaceConversionMode was applied to your
output file, you can check the
AppliedColorSpaceConversion parameter included in your
job response. If your job does not have an
AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma
(color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p
samples the chroma information of every other horizontal and every
other vertical line, yuv422p samples the color
information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the
output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
Constraints:
Length: 0 - 30
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly
used for videoconferencing and for mobile applications.main: The profile used for standard-definition
digital TV broadcasts.high: The profile used
for high-definition digital TV broadcasts and for Blu-ray discs.Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1,
1.2, 1.3, 2, 2.1,
2.2, 3, 3.1, 3.2,
4, 4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks *
256 / (Width in pixels * Height in pixels)), 16)
where
Width in pixels and Height in pixels represent either
MaxWidth and MaxHeight, or Resolution. Maximum decoded picture
buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a
block of pixels measuring 16x16.)
MaxBitRate (Optional, H.264/MPEG2/VP8 only)
The maximum number of bits per second in
a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You
can reduce the bandwidth required to stream a video by reducing the
maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8 only)
The maximum
number of bits in any x seconds of the output video. This window is
commonly 10 seconds, the standard segment duration when you're using
FMP4 or MPEG-TS for the container type of the output video. Specify an
integer greater than 0. If you specify MaxBitRate and
omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of
MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid
values include Progressive (no interlacing, top to
bottom), TopFirst (top field first),
BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder
uses Progressive for the output. If Auto is
specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The
color space conversion Elastic Transcoder applies to the output video.
Color spaces are the algorithms used by the computer to store
information about how to render color. Bt.601 is the
standard for standard definition video, while Bt.709 is
the standard for high definition video.
Valid values include
None, Bt709toBt601,
Bt601toBt709, and Auto.
If you chose
Auto for ColorSpaceConversionMode and your
output is interlaced, your frame rate is one of 23.97,
24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you
are using one of the resolution changes from the list below, Elastic
Transcoder applies the following color space conversions:
Bt601ToBt709Bt601ToBt709Bt709ToBt601Bt709ToBt601ColorspaceConversionMode
Auto mode in the future. All outputs in a playlist must
use the same ColorSpaceConversionMode.If you
do not specify a ColorSpaceConversionMode, Elastic
Transcoder does not change the color space of a file. If you are
unsure what ColorSpaceConversionMode was applied to your
output file, you can check the
AppliedColorSpaceConversion parameter included in your
job response. If your job does not have an
AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma
(color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p
samples the chroma information of every other horizontal and every
other vertical line, yuv422p samples the color
information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the
output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
public void setCodecOptions(Map<String,String> codecOptions)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly
used for videoconferencing and for mobile applications.main: The profile used for standard-definition
digital TV broadcasts.high: The profile used
for high-definition digital TV broadcasts and for Blu-ray discs.Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1,
1.2, 1.3, 2, 2.1,
2.2, 3, 3.1, 3.2,
4, 4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks *
256 / (Width in pixels * Height in pixels)), 16)
where
Width in pixels and Height in pixels represent either
MaxWidth and MaxHeight, or Resolution. Maximum decoded picture
buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a
block of pixels measuring 16x16.)
MaxBitRate (Optional, H.264/MPEG2/VP8 only)
The maximum number of bits per second in
a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You
can reduce the bandwidth required to stream a video by reducing the
maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8 only)
The maximum
number of bits in any x seconds of the output video. This window is
commonly 10 seconds, the standard segment duration when you're using
FMP4 or MPEG-TS for the container type of the output video. Specify an
integer greater than 0. If you specify MaxBitRate and
omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of
MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid
values include Progressive (no interlacing, top to
bottom), TopFirst (top field first),
BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder
uses Progressive for the output. If Auto is
specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The
color space conversion Elastic Transcoder applies to the output video.
Color spaces are the algorithms used by the computer to store
information about how to render color. Bt.601 is the
standard for standard definition video, while Bt.709 is
the standard for high definition video.
Valid values include
None, Bt709toBt601,
Bt601toBt709, and Auto.
If you chose
Auto for ColorSpaceConversionMode and your
output is interlaced, your frame rate is one of 23.97,
24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you
are using one of the resolution changes from the list below, Elastic
Transcoder applies the following color space conversions:
Bt601ToBt709Bt601ToBt709Bt709ToBt601Bt709ToBt601ColorspaceConversionMode
Auto mode in the future. All outputs in a playlist must
use the same ColorSpaceConversionMode.If you
do not specify a ColorSpaceConversionMode, Elastic
Transcoder does not change the color space of a file. If you are
unsure what ColorSpaceConversionMode was applied to your
output file, you can check the
AppliedColorSpaceConversion parameter included in your
job response. If your job does not have an
AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma
(color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p
samples the chroma information of every other horizontal and every
other vertical line, yuv422p samples the color
information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the
output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
Constraints:
Length: 0 - 30
codecOptions - Profile (H.264/VP8 Only) The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly
used for videoconferencing and for mobile applications.main: The profile used for standard-definition
digital TV broadcasts.high: The profile used
for high-definition digital TV broadcasts and for Blu-ray discs.Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1,
1.2, 1.3, 2, 2.1,
2.2, 3, 3.1, 3.2,
4, 4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks *
256 / (Width in pixels * Height in pixels)), 16)
where
Width in pixels and Height in pixels represent either
MaxWidth and MaxHeight, or Resolution. Maximum decoded picture
buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a
block of pixels measuring 16x16.)
MaxBitRate (Optional, H.264/MPEG2/VP8 only)
The maximum number of bits per second in
a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You
can reduce the bandwidth required to stream a video by reducing the
maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8 only)
The maximum
number of bits in any x seconds of the output video. This window is
commonly 10 seconds, the standard segment duration when you're using
FMP4 or MPEG-TS for the container type of the output video. Specify an
integer greater than 0. If you specify MaxBitRate and
omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of
MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid
values include Progressive (no interlacing, top to
bottom), TopFirst (top field first),
BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder
uses Progressive for the output. If Auto is
specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The
color space conversion Elastic Transcoder applies to the output video.
Color spaces are the algorithms used by the computer to store
information about how to render color. Bt.601 is the
standard for standard definition video, while Bt.709 is
the standard for high definition video.
Valid values include
None, Bt709toBt601,
Bt601toBt709, and Auto.
If you chose
Auto for ColorSpaceConversionMode and your
output is interlaced, your frame rate is one of 23.97,
24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you
are using one of the resolution changes from the list below, Elastic
Transcoder applies the following color space conversions:
Bt601ToBt709Bt601ToBt709Bt709ToBt601Bt709ToBt601ColorspaceConversionMode
Auto mode in the future. All outputs in a playlist must
use the same ColorSpaceConversionMode.If you
do not specify a ColorSpaceConversionMode, Elastic
Transcoder does not change the color space of a file. If you are
unsure what ColorSpaceConversionMode was applied to your
output file, you can check the
AppliedColorSpaceConversion parameter included in your
job response. If your job does not have an
AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma
(color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p
samples the chroma information of every other horizontal and every
other vertical line, yuv422p samples the color
information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the
output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
public VideoParameters withCodecOptions(Map<String,String> codecOptions)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly
used for videoconferencing and for mobile applications.main: The profile used for standard-definition
digital TV broadcasts.high: The profile used
for high-definition digital TV broadcasts and for Blu-ray discs.Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1,
1.2, 1.3, 2, 2.1,
2.2, 3, 3.1, 3.2,
4, 4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks *
256 / (Width in pixels * Height in pixels)), 16)
where
Width in pixels and Height in pixels represent either
MaxWidth and MaxHeight, or Resolution. Maximum decoded picture
buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a
block of pixels measuring 16x16.)
MaxBitRate (Optional, H.264/MPEG2/VP8 only)
The maximum number of bits per second in
a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You
can reduce the bandwidth required to stream a video by reducing the
maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8 only)
The maximum
number of bits in any x seconds of the output video. This window is
commonly 10 seconds, the standard segment duration when you're using
FMP4 or MPEG-TS for the container type of the output video. Specify an
integer greater than 0. If you specify MaxBitRate and
omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of
MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid
values include Progressive (no interlacing, top to
bottom), TopFirst (top field first),
BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder
uses Progressive for the output. If Auto is
specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The
color space conversion Elastic Transcoder applies to the output video.
Color spaces are the algorithms used by the computer to store
information about how to render color. Bt.601 is the
standard for standard definition video, while Bt.709 is
the standard for high definition video.
Valid values include
None, Bt709toBt601,
Bt601toBt709, and Auto.
If you chose
Auto for ColorSpaceConversionMode and your
output is interlaced, your frame rate is one of 23.97,
24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you
are using one of the resolution changes from the list below, Elastic
Transcoder applies the following color space conversions:
Bt601ToBt709Bt601ToBt709Bt709ToBt601Bt709ToBt601ColorspaceConversionMode
Auto mode in the future. All outputs in a playlist must
use the same ColorSpaceConversionMode.If you
do not specify a ColorSpaceConversionMode, Elastic
Transcoder does not change the color space of a file. If you are
unsure what ColorSpaceConversionMode was applied to your
output file, you can check the
AppliedColorSpaceConversion parameter included in your
job response. If your job does not have an
AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma
(color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p
samples the chroma information of every other horizontal and every
other vertical line, yuv422p samples the color
information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the
output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Length: 0 - 30
codecOptions - Profile (H.264/VP8 Only) The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly
used for videoconferencing and for mobile applications.main: The profile used for standard-definition
digital TV broadcasts.high: The profile used
for high-definition digital TV broadcasts and for Blu-ray discs.Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1,
1.2, 1.3, 2, 2.1,
2.2, 3, 3.1, 3.2,
4, 4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks *
256 / (Width in pixels * Height in pixels)), 16)
where
Width in pixels and Height in pixels represent either
MaxWidth and MaxHeight, or Resolution. Maximum decoded picture
buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a
block of pixels measuring 16x16.)
MaxBitRate (Optional, H.264/MPEG2/VP8 only)
The maximum number of bits per second in
a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You
can reduce the bandwidth required to stream a video by reducing the
maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8 only)
The maximum
number of bits in any x seconds of the output video. This window is
commonly 10 seconds, the standard segment duration when you're using
FMP4 or MPEG-TS for the container type of the output video. Specify an
integer greater than 0. If you specify MaxBitRate and
omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of
MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid
values include Progressive (no interlacing, top to
bottom), TopFirst (top field first),
BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder
uses Progressive for the output. If Auto is
specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The
color space conversion Elastic Transcoder applies to the output video.
Color spaces are the algorithms used by the computer to store
information about how to render color. Bt.601 is the
standard for standard definition video, while Bt.709 is
the standard for high definition video.
Valid values include
None, Bt709toBt601,
Bt601toBt709, and Auto.
If you chose
Auto for ColorSpaceConversionMode and your
output is interlaced, your frame rate is one of 23.97,
24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you
are using one of the resolution changes from the list below, Elastic
Transcoder applies the following color space conversions:
Bt601ToBt709Bt601ToBt709Bt709ToBt601Bt709ToBt601ColorspaceConversionMode
Auto mode in the future. All outputs in a playlist must
use the same ColorSpaceConversionMode.If you
do not specify a ColorSpaceConversionMode, Elastic
Transcoder does not change the color space of a file. If you are
unsure what ColorSpaceConversionMode was applied to your
output file, you can check the
AppliedColorSpaceConversion parameter included in your
job response. If your job does not have an
AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma
(color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p
samples the chroma information of every other horizontal and every
other vertical line, yuv422p samples the color
information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the
output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
public VideoParameters addCodecOptionsEntry(String key, String value)
The H.264 profile that you want to use for the output file. Elastic Transcoder supports the following profiles:
baseline: The profile most commonly
used for videoconferencing and for mobile applications.main: The profile used for standard-definition
digital TV broadcasts.high: The profile used
for high-definition digital TV broadcasts and for Blu-ray discs.Level (H.264 Only)
The H.264 level that you want to use for the output file. Elastic Transcoder supports the following levels:
1, 1b, 1.1,
1.2, 1.3, 2, 2.1,
2.2, 3, 3.1, 3.2,
4, 4.1
MaxReferenceFrames (H.264 Only)
Applicable only when the value of Video:Codec is H.264. The maximum number of previously decoded frames to use as a reference for decoding future frames. Valid values are integers 0 through 16, but we recommend that you not use a value greater than the following:
Min(Floor(Maximum decoded picture buffer in macroblocks *
256 / (Width in pixels * Height in pixels)), 16)
where
Width in pixels and Height in pixels represent either
MaxWidth and MaxHeight, or Resolution. Maximum decoded picture
buffer in macroblocks depends on the value of the
Level object. See the list below. (A macroblock is a
block of pixels measuring 16x16.)
MaxBitRate (Optional, H.264/MPEG2/VP8 only)
The maximum number of bits per second in
a video buffer; the size of the buffer is specified by
BufferSize. Specify a value between 16 and 62,500. You
can reduce the bandwidth required to stream a video by reducing the
maximum bit rate, but this also reduces the quality of the video.
BufferSize (Optional, H.264/MPEG2/VP8 only)
The maximum
number of bits in any x seconds of the output video. This window is
commonly 10 seconds, the standard segment duration when you're using
FMP4 or MPEG-TS for the container type of the output video. Specify an
integer greater than 0. If you specify MaxBitRate and
omit BufferSize, Elastic Transcoder sets
BufferSize to 10 times the value of
MaxBitRate.
InterlacedMode (Optional, H.264/MPEG2 Only)
The interlace mode for the output video.
Interlaced video is used to double the perceived frame rate for a video by interlacing two fields (one field on every other line, the other field on the other lines) so that the human eye registers multiple pictures per frame. Interlacing reduces the bandwidth required for transmitting a video, but can result in blurred images and flickering.
Valid
values include Progressive (no interlacing, top to
bottom), TopFirst (top field first),
BottomFirst (bottom field first), and Auto.
If InterlaceMode is not specified, Elastic Transcoder
uses Progressive for the output. If Auto is
specified, Elastic Transcoder interlaces the output.
ColorSpaceConversionMode (Optional, H.264/MPEG2 Only)
The
color space conversion Elastic Transcoder applies to the output video.
Color spaces are the algorithms used by the computer to store
information about how to render color. Bt.601 is the
standard for standard definition video, while Bt.709 is
the standard for high definition video.
Valid values include
None, Bt709toBt601,
Bt601toBt709, and Auto.
If you chose
Auto for ColorSpaceConversionMode and your
output is interlaced, your frame rate is one of 23.97,
24, 25, 29.97, 50,
or 60, your SegmentDuration is null, and you
are using one of the resolution changes from the list below, Elastic
Transcoder applies the following color space conversions:
Bt601ToBt709Bt601ToBt709Bt709ToBt601Bt709ToBt601ColorspaceConversionMode
Auto mode in the future. All outputs in a playlist must
use the same ColorSpaceConversionMode.If you
do not specify a ColorSpaceConversionMode, Elastic
Transcoder does not change the color space of a file. If you are
unsure what ColorSpaceConversionMode was applied to your
output file, you can check the
AppliedColorSpaceConversion parameter included in your
job response. If your job does not have an
AppliedColorSpaceConversion in its response, no
ColorSpaceConversionMode was applied.
ChromaSubsampling
The sampling pattern for the chroma
(color) channels of the output video. Valid values include
yuv420p and yuv422p.
yuv420p
samples the chroma information of every other horizontal and every
other vertical line, yuv422p samples the color
information of every horizontal line and every other vertical line.
LoopCount (Gif Only)
The number of times you want the
output gif to loop. Valid values include Infinite and
integers between 0 and 100, inclusive.
The method adds a new key-value pair into CodecOptions parameter, and returns a reference to this object so that method calls can be chained together.
Constraints:
Length: 0 - 30
key - The key of the entry to be added into CodecOptions.value - The corresponding value of the entry to be added into CodecOptions.public VideoParameters clearCodecOptionsEntries()
Returns a reference to this object so that method calls can be chained together.
public String getKeyframesMaxDist()
H.264, MPEG2, or VP8. The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For
Smooth outputs, the FrameRate must have a
constant ratio to the KeyframesMaxDist. This allows
Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file
can have a FrameRate of 30 with a
KeyframesMaxDist of 90. The output file then needs to
have a ratio of 1:3. Valid outputs would have FrameRate
of 30, 25, and 10, and KeyframesMaxDist of 90, 75, and
30, respectively.
Alternately, this can be achieved by setting
FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
Constraints:
Pattern: ^\d{1,6}$
H.264, MPEG2, or VP8. The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For
Smooth outputs, the FrameRate must have a
constant ratio to the KeyframesMaxDist. This allows
Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file
can have a FrameRate of 30 with a
KeyframesMaxDist of 90. The output file then needs to
have a ratio of 1:3. Valid outputs would have FrameRate
of 30, 25, and 10, and KeyframesMaxDist of 90, 75, and
30, respectively.
Alternately, this can be achieved by setting
FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
public void setKeyframesMaxDist(String keyframesMaxDist)
H.264, MPEG2, or VP8. The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For
Smooth outputs, the FrameRate must have a
constant ratio to the KeyframesMaxDist. This allows
Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file
can have a FrameRate of 30 with a
KeyframesMaxDist of 90. The output file then needs to
have a ratio of 1:3. Valid outputs would have FrameRate
of 30, 25, and 10, and KeyframesMaxDist of 90, 75, and
30, respectively.
Alternately, this can be achieved by setting
FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
Constraints:
Pattern: ^\d{1,6}$
keyframesMaxDist - Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8. The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For
Smooth outputs, the FrameRate must have a
constant ratio to the KeyframesMaxDist. This allows
Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file
can have a FrameRate of 30 with a
KeyframesMaxDist of 90. The output file then needs to
have a ratio of 1:3. Valid outputs would have FrameRate
of 30, 25, and 10, and KeyframesMaxDist of 90, 75, and
30, respectively.
Alternately, this can be achieved by setting
FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
public VideoParameters withKeyframesMaxDist(String keyframesMaxDist)
H.264, MPEG2, or VP8. The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For
Smooth outputs, the FrameRate must have a
constant ratio to the KeyframesMaxDist. This allows
Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file
can have a FrameRate of 30 with a
KeyframesMaxDist of 90. The output file then needs to
have a ratio of 1:3. Valid outputs would have FrameRate
of 30, 25, and 10, and KeyframesMaxDist of 90, 75, and
30, respectively.
Alternately, this can be achieved by setting
FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: ^\d{1,6}$
keyframesMaxDist - Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8. The maximum number of frames between key frames. Key frames are fully encoded frames; the frames between key frames are encoded based, in part, on the content of the key frames. The value is an integer formatted as a string; valid values are between 1 (every frame is a key frame) and 100000, inclusive. A higher value results in higher compression but may also discernibly decrease video quality.
For
Smooth outputs, the FrameRate must have a
constant ratio to the KeyframesMaxDist. This allows
Smooth playlists to switch between different quality
levels while the file is being played.
For example, an input file
can have a FrameRate of 30 with a
KeyframesMaxDist of 90. The output file then needs to
have a ratio of 1:3. Valid outputs would have FrameRate
of 30, 25, and 10, and KeyframesMaxDist of 90, 75, and
30, respectively.
Alternately, this can be achieved by setting
FrameRate to auto and having the same values for
MaxFrameRate and KeyframesMaxDist.
public String getFixedGOP()
H.264, MPEG2, or VP8.
Whether to use a fixed value for FixedGOP. Valid
values are true and false:
true: Elastic Transcoder uses the value of
KeyframesMaxDist for the distance between key frames (the
number of frames in a group of pictures, or GOP).false: The distance between key frames can vary.FixedGOP must be set to
true for fmp4 containers.
Constraints:
Pattern: (^true$)|(^false$)
H.264, MPEG2, or VP8.
Whether to use a fixed value for FixedGOP. Valid
values are true and false:
true: Elastic Transcoder uses the value of
KeyframesMaxDist for the distance between key frames (the
number of frames in a group of pictures, or GOP).false: The distance between key frames can vary.FixedGOP must be set to
true for fmp4 containers.
public void setFixedGOP(String fixedGOP)
H.264, MPEG2, or VP8.
Whether to use a fixed value for FixedGOP. Valid
values are true and false:
true: Elastic Transcoder uses the value of
KeyframesMaxDist for the distance between key frames (the
number of frames in a group of pictures, or GOP).false: The distance between key frames can vary.FixedGOP must be set to
true for fmp4 containers.
Constraints:
Pattern: (^true$)|(^false$)
fixedGOP - Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8.
Whether to use a fixed value for FixedGOP. Valid
values are true and false:
true: Elastic Transcoder uses the value of
KeyframesMaxDist for the distance between key frames (the
number of frames in a group of pictures, or GOP).false: The distance between key frames can vary.FixedGOP must be set to
true for fmp4 containers.
public VideoParameters withFixedGOP(String fixedGOP)
H.264, MPEG2, or VP8.
Whether to use a fixed value for FixedGOP. Valid
values are true and false:
true: Elastic Transcoder uses the value of
KeyframesMaxDist for the distance between key frames (the
number of frames in a group of pictures, or GOP).false: The distance between key frames can vary.FixedGOP must be set to
true for fmp4 containers.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^true$)|(^false$)
fixedGOP - Applicable only when the value of Video:Codec is one of
H.264, MPEG2, or VP8.
Whether to use a fixed value for FixedGOP. Valid
values are true and false:
true: Elastic Transcoder uses the value of
KeyframesMaxDist for the distance between key frames (the
number of frames in a group of pictures, or GOP).false: The distance between key frames can vary.FixedGOP must be set to
true for fmp4 containers.
public String getBitRate()
Level and Profile. If you specify
auto, Elastic Transcoder uses the detected bit rate of
the input source. If you specify a value other than auto,
we recommend that you specify a value less than or equal to the
maximum H.264-compliant value listed for your level and profile: Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
Constraints:
Pattern: (^\d{2,5}$)|(^auto$)
Level and Profile. If you specify
auto, Elastic Transcoder uses the detected bit rate of
the input source. If you specify a value other than auto,
we recommend that you specify a value less than or equal to the
maximum H.264-compliant value listed for your level and profile: Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
public void setBitRate(String bitRate)
Level and Profile. If you specify
auto, Elastic Transcoder uses the detected bit rate of
the input source. If you specify a value other than auto,
we recommend that you specify a value less than or equal to the
maximum H.264-compliant value listed for your level and profile: Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
Constraints:
Pattern: (^\d{2,5}$)|(^auto$)
bitRate - The bit rate of the video stream in the output file, in
kilobits/second. Valid values depend on the values of
Level and Profile. If you specify
auto, Elastic Transcoder uses the detected bit rate of
the input source. If you specify a value other than auto,
we recommend that you specify a value less than or equal to the
maximum H.264-compliant value listed for your level and profile: Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
public VideoParameters withBitRate(String bitRate)
Level and Profile. If you specify
auto, Elastic Transcoder uses the detected bit rate of
the input source. If you specify a value other than auto,
we recommend that you specify a value less than or equal to the
maximum H.264-compliant value listed for your level and profile: Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^\d{2,5}$)|(^auto$)
bitRate - The bit rate of the video stream in the output file, in
kilobits/second. Valid values depend on the values of
Level and Profile. If you specify
auto, Elastic Transcoder uses the detected bit rate of
the input source. If you specify a value other than auto,
we recommend that you specify a value less than or equal to the
maximum H.264-compliant value listed for your level and profile: Level - Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum video bit rate in kilobits/second (high Profile)
public String getFrameRate()
auto, 10,
15, 23.97, 24, 25,
29.97, 30, 60
If you specify
auto, Elastic Transcoder uses the detected frame rate of
the input source. If you specify a frame rate, we recommend that you
perform the following calculation:
Frame rate = maximum
recommended decoding speed in luma samples/second / (width in pixels *
height in pixels)
where:
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
Constraints:
Pattern: (^auto$)|(^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^50$)|(^60$)
auto, 10,
15, 23.97, 24, 25,
29.97, 30, 60
If you specify
auto, Elastic Transcoder uses the detected frame rate of
the input source. If you specify a frame rate, we recommend that you
perform the following calculation:
Frame rate = maximum
recommended decoding speed in luma samples/second / (width in pixels *
height in pixels)
where:
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
public void setFrameRate(String frameRate)
auto, 10,
15, 23.97, 24, 25,
29.97, 30, 60
If you specify
auto, Elastic Transcoder uses the detected frame rate of
the input source. If you specify a frame rate, we recommend that you
perform the following calculation:
Frame rate = maximum
recommended decoding speed in luma samples/second / (width in pixels *
height in pixels)
where:
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
Constraints:
Pattern: (^auto$)|(^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^50$)|(^60$)
frameRate - The frames per second for the video stream in the output file. Valid
values include: auto, 10,
15, 23.97, 24, 25,
29.97, 30, 60
If you specify
auto, Elastic Transcoder uses the detected frame rate of
the input source. If you specify a frame rate, we recommend that you
perform the following calculation:
Frame rate = maximum
recommended decoding speed in luma samples/second / (width in pixels *
height in pixels)
where:
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
public VideoParameters withFrameRate(String frameRate)
auto, 10,
15, 23.97, 24, 25,
29.97, 30, 60
If you specify
auto, Elastic Transcoder uses the detected frame rate of
the input source. If you specify a frame rate, we recommend that you
perform the following calculation:
Frame rate = maximum
recommended decoding speed in luma samples/second / (width in pixels *
height in pixels)
where:
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^auto$)|(^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^50$)|(^60$)
frameRate - The frames per second for the video stream in the output file. Valid
values include: auto, 10,
15, 23.97, 24, 25,
29.97, 30, 60
If you specify
auto, Elastic Transcoder uses the detected frame rate of
the input source. If you specify a frame rate, we recommend that you
perform the following calculation:
Frame rate = maximum
recommended decoding speed in luma samples/second / (width in pixels *
height in pixels)
where:
The maximum recommended decoding speed in Luma samples/second for each level is described in the following list (Level - Decoding speed):
public String getMaxFrameRate()
auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. Specify the maximum frame rate that you want
Elastic Transcoder to use when the frame rate of the input video is
greater than the desired maximum frame rate of the output video. Valid
values include: 10, 15, 23.97,
24, 25, 29.97, 30,
60.
Constraints:
Pattern: (^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^50$)|(^60$)
auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. Specify the maximum frame rate that you want
Elastic Transcoder to use when the frame rate of the input video is
greater than the desired maximum frame rate of the output video. Valid
values include: 10, 15, 23.97,
24, 25, 29.97, 30,
60.public void setMaxFrameRate(String maxFrameRate)
auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. Specify the maximum frame rate that you want
Elastic Transcoder to use when the frame rate of the input video is
greater than the desired maximum frame rate of the output video. Valid
values include: 10, 15, 23.97,
24, 25, 29.97, 30,
60.
Constraints:
Pattern: (^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^50$)|(^60$)
maxFrameRate - If you specify auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. Specify the maximum frame rate that you want
Elastic Transcoder to use when the frame rate of the input video is
greater than the desired maximum frame rate of the output video. Valid
values include: 10, 15, 23.97,
24, 25, 29.97, 30,
60.public VideoParameters withMaxFrameRate(String maxFrameRate)
auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. Specify the maximum frame rate that you want
Elastic Transcoder to use when the frame rate of the input video is
greater than the desired maximum frame rate of the output video. Valid
values include: 10, 15, 23.97,
24, 25, 29.97, 30,
60.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^10$)|(^15$)|(^23.97$)|(^24$)|(^25$)|(^29.97$)|(^30$)|(^50$)|(^60$)
maxFrameRate - If you specify auto for FrameRate, Elastic
Transcoder uses the frame rate of the input video for the frame rate
of the output video. Specify the maximum frame rate that you want
Elastic Transcoder to use when the frame rate of the input video is
greater than the desired maximum frame rate of the output video. Valid
values include: 10, 15, 23.97,
24, 25, 29.97, 30,
60.public String getResolution()
To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The width and height of the video in the
output file, in pixels. Valid values are auto and
width x height:
auto: Elastic
Transcoder attempts to preserve the width and height of the input
file, subject to the following rules.width x
height: The width and height of the output video in
pixels.Note the following about specifying the width and height:
Constraints:
Pattern: (^auto$)|(^\d{1,5}x\d{1,5}$)
To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The width and height of the video in the
output file, in pixels. Valid values are auto and
width x height:
auto: Elastic
Transcoder attempts to preserve the width and height of the input
file, subject to the following rules.width x
height: The width and height of the output video in
pixels.Note the following about specifying the width and height:
public void setResolution(String resolution)
To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The width and height of the video in the
output file, in pixels. Valid values are auto and
width x height:
auto: Elastic
Transcoder attempts to preserve the width and height of the input
file, subject to the following rules.width x
height: The width and height of the output video in
pixels.Note the following about specifying the width and height:
Constraints:
Pattern: (^auto$)|(^\d{1,5}x\d{1,5}$)
resolution - To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The width and height of the video in the
output file, in pixels. Valid values are auto and
width x height:
auto: Elastic
Transcoder attempts to preserve the width and height of the input
file, subject to the following rules.width x
height: The width and height of the output video in
pixels.Note the following about specifying the width and height:
public VideoParameters withResolution(String resolution)
To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The width and height of the video in the
output file, in pixels. Valid values are auto and
width x height:
auto: Elastic
Transcoder attempts to preserve the width and height of the input
file, subject to the following rules.width x
height: The width and height of the output video in
pixels.Note the following about specifying the width and height:
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^auto$)|(^\d{1,5}x\d{1,5}$)
resolution - To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The width and height of the video in the
output file, in pixels. Valid values are auto and
width x height:
auto: Elastic
Transcoder attempts to preserve the width and height of the input
file, subject to the following rules.width x
height: The width and height of the output video in
pixels.Note the following about specifying the width and height:
public String getAspectRatio()
To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The display aspect ratio of the video in the output file. Valid values include:
auto,
1:1, 4:3, 3:2,
16:9
If you specify auto, Elastic
Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)
To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The display aspect ratio of the video in the output file. Valid values include:
auto,
1:1, 4:3, 3:2,
16:9
If you specify auto, Elastic
Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
public void setAspectRatio(String aspectRatio)
To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The display aspect ratio of the video in the output file. Valid values include:
auto,
1:1, 4:3, 3:2,
16:9
If you specify auto, Elastic
Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)
aspectRatio - To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The display aspect ratio of the video in the output file. Valid values include:
auto,
1:1, 4:3, 3:2,
16:9
If you specify auto, Elastic
Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
public VideoParameters withAspectRatio(String aspectRatio)
To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The display aspect ratio of the video in the output file. Valid values include:
auto,
1:1, 4:3, 3:2,
16:9
If you specify auto, Elastic
Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)
aspectRatio - To better control resolution and aspect ratio of output
videos, we recommend that you use the values MaxWidth,
MaxHeight, SizingPolicy,
PaddingPolicy, and DisplayAspectRatio
instead of Resolution and AspectRatio. The
two groups of settings are mutually exclusive. Do not use them
together.
The display aspect ratio of the video in the output file. Valid values include:
auto,
1:1, 4:3, 3:2,
16:9
If you specify auto, Elastic
Transcoder tries to preserve the aspect ratio of the input file.
If you specify an aspect ratio for the output file that differs from aspect ratio of the input file, Elastic Transcoder adds pillarboxing (black bars on the sides) or letterboxing (black bars on the top and bottom) to maintain the aspect ratio of the active region of the video.
public String getMaxWidth()
auto, Elastic Transcoder uses 1920 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 128 and 4096.
Constraints:
Pattern: (^auto$)|(^\d{2,4}$)
auto, Elastic Transcoder uses 1920 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 128 and 4096.public void setMaxWidth(String maxWidth)
auto, Elastic Transcoder uses 1920 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 128 and 4096.
Constraints:
Pattern: (^auto$)|(^\d{2,4}$)
maxWidth - The maximum width of the output video in pixels. If you specify
auto, Elastic Transcoder uses 1920 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 128 and 4096.public VideoParameters withMaxWidth(String maxWidth)
auto, Elastic Transcoder uses 1920 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 128 and 4096.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^auto$)|(^\d{2,4}$)
maxWidth - The maximum width of the output video in pixels. If you specify
auto, Elastic Transcoder uses 1920 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 128 and 4096.public String getMaxHeight()
auto, Elastic Transcoder uses 1080 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 96 and 3072.
Constraints:
Pattern: (^auto$)|(^\d{2,4}$)
auto, Elastic Transcoder uses 1080 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 96 and 3072.public void setMaxHeight(String maxHeight)
auto, Elastic Transcoder uses 1080 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 96 and 3072.
Constraints:
Pattern: (^auto$)|(^\d{2,4}$)
maxHeight - The maximum height of the output video in pixels. If you specify
auto, Elastic Transcoder uses 1080 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 96 and 3072.public VideoParameters withMaxHeight(String maxHeight)
auto, Elastic Transcoder uses 1080 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 96 and 3072.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^auto$)|(^\d{2,4}$)
maxHeight - The maximum height of the output video in pixels. If you specify
auto, Elastic Transcoder uses 1080 (Full HD) as the
default value. If you specify a numeric value, enter an even integer
between 96 and 3072.public String getDisplayAspectRatio()
Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)
public void setDisplayAspectRatio(String displayAspectRatio)
Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)
displayAspectRatio - The value that Elastic Transcoder adds to the metadata in the output
file.public VideoParameters withDisplayAspectRatio(String displayAspectRatio)
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^auto$)|(^1:1$)|(^4:3$)|(^3:2$)|(^16:9$)
displayAspectRatio - The value that Elastic Transcoder adds to the metadata in the output
file.public String getSizingPolicy()
Fit: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the
other value.Fill: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight and matches or exceeds
the other value. Elastic Transcoder centers the output video and then
crops it in the dimension (if any) that exceeds the maximum
value.Stretch: Elastic Transcoder stretches the
output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative
proportions of the input video and the output video are different, the
output video will be distorted.Keep: Elastic
Transcoder does not scale the output video. If either dimension of the
input video exceeds the values that you specified for
MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.ShrinkToFit: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without exceeding
either value. If you specify this option, Elastic Transcoder does not
scale the video up.ShrinkToFill: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder
does not scale the video up.
Constraints:
Pattern: (^Fit$)|(^Fill$)|(^Stretch$)|(^Keep$)|(^ShrinkToFit$)|(^ShrinkToFill$)
Fit: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the
other value.Fill: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight and matches or exceeds
the other value. Elastic Transcoder centers the output video and then
crops it in the dimension (if any) that exceeds the maximum
value.Stretch: Elastic Transcoder stretches the
output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative
proportions of the input video and the output video are different, the
output video will be distorted.Keep: Elastic
Transcoder does not scale the output video. If either dimension of the
input video exceeds the values that you specified for
MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.ShrinkToFit: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without exceeding
either value. If you specify this option, Elastic Transcoder does not
scale the video up.ShrinkToFill: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder
does not scale the video up.public void setSizingPolicy(String sizingPolicy)
Fit: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the
other value.Fill: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight and matches or exceeds
the other value. Elastic Transcoder centers the output video and then
crops it in the dimension (if any) that exceeds the maximum
value.Stretch: Elastic Transcoder stretches the
output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative
proportions of the input video and the output video are different, the
output video will be distorted.Keep: Elastic
Transcoder does not scale the output video. If either dimension of the
input video exceeds the values that you specified for
MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.ShrinkToFit: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without exceeding
either value. If you specify this option, Elastic Transcoder does not
scale the video up.ShrinkToFill: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder
does not scale the video up.
Constraints:
Pattern: (^Fit$)|(^Fill$)|(^Stretch$)|(^Keep$)|(^ShrinkToFit$)|(^ShrinkToFill$)
sizingPolicy - Specify one of the following values to control scaling of the output
video:
Fit: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the
other value.Fill: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight and matches or exceeds
the other value. Elastic Transcoder centers the output video and then
crops it in the dimension (if any) that exceeds the maximum
value.Stretch: Elastic Transcoder stretches the
output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative
proportions of the input video and the output video are different, the
output video will be distorted.Keep: Elastic
Transcoder does not scale the output video. If either dimension of the
input video exceeds the values that you specified for
MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.ShrinkToFit: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without exceeding
either value. If you specify this option, Elastic Transcoder does not
scale the video up.ShrinkToFill: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder
does not scale the video up.public VideoParameters withSizingPolicy(String sizingPolicy)
Fit: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the
other value.Fill: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight and matches or exceeds
the other value. Elastic Transcoder centers the output video and then
crops it in the dimension (if any) that exceeds the maximum
value.Stretch: Elastic Transcoder stretches the
output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative
proportions of the input video and the output video are different, the
output video will be distorted.Keep: Elastic
Transcoder does not scale the output video. If either dimension of the
input video exceeds the values that you specified for
MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.ShrinkToFit: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without exceeding
either value. If you specify this option, Elastic Transcoder does not
scale the video up.ShrinkToFill: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder
does not scale the video up.Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^Fit$)|(^Fill$)|(^Stretch$)|(^Keep$)|(^ShrinkToFit$)|(^ShrinkToFill$)
sizingPolicy - Specify one of the following values to control scaling of the output
video:
Fit: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight without exceeding the
other value.Fill: Elastic Transcoder scales the
output video so it matches the value that you specified in either
MaxWidth or MaxHeight and matches or exceeds
the other value. Elastic Transcoder centers the output video and then
crops it in the dimension (if any) that exceeds the maximum
value.Stretch: Elastic Transcoder stretches the
output video to match the values that you specified for
MaxWidth and MaxHeight. If the relative
proportions of the input video and the output video are different, the
output video will be distorted.Keep: Elastic
Transcoder does not scale the output video. If either dimension of the
input video exceeds the values that you specified for
MaxWidth and MaxHeight, Elastic Transcoder
crops the output video.ShrinkToFit: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without exceeding
either value. If you specify this option, Elastic Transcoder does not
scale the video up.ShrinkToFill: Elastic
Transcoder scales the output video down so that its dimensions match
the values that you specified for at least one of
MaxWidth and MaxHeight without dropping
below either value. If you specify this option, Elastic Transcoder
does not scale the video up.public String getPaddingPolicy()
PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight.
Constraints:
Pattern: (^Pad$)|(^NoPad$)
PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight.public void setPaddingPolicy(String paddingPolicy)
PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight.
Constraints:
Pattern: (^Pad$)|(^NoPad$)
paddingPolicy - When you set PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight.public VideoParameters withPaddingPolicy(String paddingPolicy)
PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight.
Returns a reference to this object so that method calls can be chained together.
Constraints:
Pattern: (^Pad$)|(^NoPad$)
paddingPolicy - When you set PaddingPolicy to Pad, Elastic
Transcoder may add black bars to the top and bottom and/or left and
right sides of the output video to make the total size of the output
video match the values that you specified for MaxWidth
and MaxHeight.public List<PresetWatermark> getWatermarks()
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
public void setWatermarks(Collection<PresetWatermark> watermarks)
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
watermarks - Settings for the size, location, and opacity of graphics that you want
Elastic Transcoder to overlay over videos that are transcoded using
this preset. You can specify settings for up to four watermarks.
Watermarks appear in the specified size and location, and with the
specified opacity for the duration of the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
public VideoParameters withWatermarks(PresetWatermark... watermarks)
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
NOTE: This method appends the values to the existing list (if
any). Use setWatermarks(java.util.Collection) or withWatermarks(java.util.Collection) if you want to override the
existing values.
Returns a reference to this object so that method calls can be chained together.
watermarks - Settings for the size, location, and opacity of graphics that you want
Elastic Transcoder to overlay over videos that are transcoded using
this preset. You can specify settings for up to four watermarks.
Watermarks appear in the specified size and location, and with the
specified opacity for the duration of the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
public VideoParameters withWatermarks(Collection<PresetWatermark> watermarks)
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
Returns a reference to this object so that method calls can be chained together.
watermarks - Settings for the size, location, and opacity of graphics that you want
Elastic Transcoder to overlay over videos that are transcoded using
this preset. You can specify settings for up to four watermarks.
Watermarks appear in the specified size and location, and with the
specified opacity for the duration of the transcoded video.
Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.
When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.
public String toString()
toString in class ObjectObject.toString()public VideoParameters clone()
Copyright © 2015. All rights reserved.