com.amazonaws.services.dynamodb
Interface AmazonDynamoDB

All Known Subinterfaces:

AmazonDynamoDBAsync

All Known Implementing Classes:

AmazonDynamoDBAsyncClient, AmazonDynamoDBClient

public interface AmazonDynamoDB

Interface for accessing AmazonDynamoDB.

Amazon DynamoDB is a fast, highly scalable, highly available, cost-effective non-relational database service. Amazon DynamoDB removes traditional scalability limitations on data storage while maintaining low latency and predictable performance.

Method Summary

BatchGetItemResult	batchGetItem(BatchGetItemRequest batchGetItemRequest) The BatchGetItem operation returns the attributes for multiple items from multiple tables using their primary keys.
CreateTableResult	createTable(CreateTableRequest createTableRequest) The CreateTable operation adds a new table to your account.
DeleteItemResult	deleteItem(DeleteItemRequest deleteItemRequest) Deletes a single item in a table by primary key.
DeleteTableResult	deleteTable(DeleteTableRequest deleteTableRequest) The DeleteTable operation deletes a table and all of its items.
DescribeTableResult	describeTable(DescribeTableRequest describeTableRequest) Returns information about the table, including the current status of the table, the primary key schema and when the table was created.
ResponseMetadata	getCachedResponseMetadata(AmazonWebServiceRequest request) Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected.
GetItemResult	getItem(GetItemRequest getItemRequest) The GetItem operation returns a set of Attributes for an item that matches the primary key.
ListTablesResult	listTables() Returns a paginated list of table names created by the AWS Account of the caller in the AWS Region (e.g.
ListTablesResult	listTables(ListTablesRequest listTablesRequest) Returns a paginated list of table names created by the AWS Account of the caller in the AWS Region (e.g.
PutItemResult	putItem(PutItemRequest putItemRequest) Creates a new item, or replaces an old item with a new item (including all the attributes).
QueryResult	query(QueryRequest queryRequest) The Query operation gets the values of one or more items and its attributes by primary key (composite primary key, only).
ScanResult	scan(ScanRequest scanRequest) The Scan operation returns one or more items and its attributes by performing a full scan of a table.
void	setEndpoint(String endpoint) Overrides the default endpoint for this client ("http://dynamodb.us-east-1.amazonaws.com/").
void	shutdown() Shuts down this client object, releasing any resources that might be held open.
UpdateItemResult	updateItem(UpdateItemRequest updateItemRequest) Edits an existing item's attributes.
UpdateTableResult	updateTable(UpdateTableRequest updateTableRequest) Updates the provisioned throughput for the given table.

Method Detail

setEndpoint

void setEndpoint(String endpoint)
                 throws IllegalArgumentException

Overrides the default endpoint for this client ("http://dynamodb.us-east-1.amazonaws.com/"). Callers can use this method to control which AWS region they want to work with.

Callers can pass in just the endpoint (ex: "ec2.amazonaws.com") or a full URL, including the protocol (ex: "https://ec2.amazonaws.com"). If the protocol is not specified here, the default protocol from this client's ClientConfiguration will be used, which by default is HTTPS.

For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available endpoints for all AWS services, see: http://developer.amazonwebservices.com/connect/entry.jspa?externalID=3912

Parameters:

endpoint - The endpoint (ex: "ec2.amazonaws.com") or a full URL, including the protocol (ex: "https://ec2.amazonaws.com") of the region specific AWS endpoint this client will communicate with.

Throws:

IllegalArgumentException - If any problems are detected with the specified endpoint.

scan

ScanResult scan(ScanRequest scanRequest)
                throws AmazonServiceException,
                       AmazonClientException

The Scan operation returns one or more items and its attributes by performing a full scan of a table. Limit the returned results by specifying a filter.

Parameters:

scanRequest - Container for the necessary parameters to execute the Scan service method on AmazonDynamoDB.

Returns:

The response from the Scan service method, as returned by AmazonDynamoDB.

Throws:

ProvisionedThroughputExceededException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

createTable

CreateTableResult createTable(CreateTableRequest createTableRequest)
                              throws AmazonServiceException,
                                     AmazonClientException

The CreateTable operation adds a new table to your account. The table name must be unique among those associated with the AWS Account issuing the request, and the AWS Region that receives the request (e.g. us-east-1). The CreateTable operation triggers an asynchronous workflow to begin creating the table. Amazon DynamoDB immediately returns the state of the table (CREATING) until the table is in the ACTIVE state. Once the table is in the ACTIVE state, you can perform data plane operations.

Parameters:

createTableRequest - Container for the necessary parameters to execute the CreateTable service method on AmazonDynamoDB.

Returns:

The response from the CreateTable service method, as returned by AmazonDynamoDB.

Throws:

ResourceInUseException

LimitExceededException

InternalServerErrorException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

listTables

ListTablesResult listTables(ListTablesRequest listTablesRequest)
                            throws AmazonServiceException,
                                   AmazonClientException

Returns a paginated list of table names created by the AWS Account of the caller in the AWS Region (e.g. us-east-1).

Parameters:

listTablesRequest - Container for the necessary parameters to execute the ListTables service method on AmazonDynamoDB.

Returns:

The response from the ListTables service method, as returned by AmazonDynamoDB.

Throws:

InternalServerErrorException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

query

QueryResult query(QueryRequest queryRequest)
                  throws AmazonServiceException,
                         AmazonClientException

The Query operation gets the values of one or more items and its attributes by primary key (composite primary key, only). Narrow the scope of the query using comparison operators on the RangeKeyValue of the composite key. Use the ScanIndexForward parameter to get results in forward or reverse order by range key.

Parameters:

queryRequest - Container for the necessary parameters to execute the Query service method on AmazonDynamoDB.

Returns:

The response from the Query service method, as returned by AmazonDynamoDB.

Throws:

ProvisionedThroughputExceededException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

updateItem

UpdateItemResult updateItem(UpdateItemRequest updateItemRequest)
                            throws AmazonServiceException,
                                   AmazonClientException

Edits an existing item's attributes. You can perform a conditional update (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).

Parameters:

updateItemRequest - Container for the necessary parameters to execute the UpdateItem service method on AmazonDynamoDB.

Returns:

The response from the UpdateItem service method, as returned by AmazonDynamoDB.

Throws:

ProvisionedThroughputExceededException

ConditionalCheckFailedException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

updateTable

UpdateTableResult updateTable(UpdateTableRequest updateTableRequest)
                              throws AmazonServiceException,
                                     AmazonClientException

Updates the provisioned throughput for the given table. Setting the throughput for a table helps you manage performance and is part of the Provisioned Capacity feature of Amazon DynamoDB.

Parameters:

updateTableRequest - Container for the necessary parameters to execute the UpdateTable service method on AmazonDynamoDB.

Returns:

The response from the UpdateTable service method, as returned by AmazonDynamoDB.

Throws:

ResourceInUseException

LimitExceededException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

putItem

PutItemResult putItem(PutItemRequest putItemRequest)
                      throws AmazonServiceException,
                             AmazonClientException

Creates a new item, or replaces an old item with a new item (including all the attributes). If an item already exists in the specified table with the same primary key, the new item completely replaces the existing item. You can perform a conditional put (insert a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values.

Parameters:

putItemRequest - Container for the necessary parameters to execute the PutItem service method on AmazonDynamoDB.

Returns:

The response from the PutItem service method, as returned by AmazonDynamoDB.

Throws:

ProvisionedThroughputExceededException

ConditionalCheckFailedException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

deleteTable

DeleteTableResult deleteTable(DeleteTableRequest deleteTableRequest)
                              throws AmazonServiceException,
                                     AmazonClientException

The DeleteTable operation deletes a table and all of its items. If the table is in the ACTIVE state, you can delete it. If a table is in CREATING or UPDATING states, then DeleteTable returns a ResourceInUseException. If the specified table does not exist, Amazon DynamoDB returns a ResourceNotFoundException.

Parameters:

deleteTableRequest - Container for the necessary parameters to execute the DeleteTable service method on AmazonDynamoDB.

Returns:

The response from the DeleteTable service method, as returned by AmazonDynamoDB.

Throws:

ResourceInUseException

LimitExceededException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

deleteItem

DeleteItemResult deleteItem(DeleteItemRequest deleteItemRequest)
                            throws AmazonServiceException,
                                   AmazonClientException

Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.

Parameters:

deleteItemRequest - Container for the necessary parameters to execute the DeleteItem service method on AmazonDynamoDB.

Returns:

The response from the DeleteItem service method, as returned by AmazonDynamoDB.

Throws:

ProvisionedThroughputExceededException

ConditionalCheckFailedException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

describeTable

DescribeTableResult describeTable(DescribeTableRequest describeTableRequest)
                                  throws AmazonServiceException,
                                         AmazonClientException

Returns information about the table, including the current status of the table, the primary key schema and when the table was created. If the table does not exist, the server returns a ResourceNotFoundException.

Parameters:

describeTableRequest - Container for the necessary parameters to execute the DescribeTable service method on AmazonDynamoDB.

Returns:

The response from the DescribeTable service method, as returned by AmazonDynamoDB.

Throws:

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

getItem

GetItemResult getItem(GetItemRequest getItemRequest)
                      throws AmazonServiceException,
                             AmazonClientException

The GetItem operation returns a set of Attributes for an item that matches the primary key. The GetItem operation provides an eventually consistent read by default. If eventually consistent reads are not acceptable for your application, use ConsistentRead. Although this operation might take longer than a standard read, it always returns the last updated value.

Parameters:

getItemRequest - Container for the necessary parameters to execute the GetItem service method on AmazonDynamoDB.

Returns:

The response from the GetItem service method, as returned by AmazonDynamoDB.

Throws:

ProvisionedThroughputExceededException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

batchGetItem

BatchGetItemResult batchGetItem(BatchGetItemRequest batchGetItemRequest)
                                throws AmazonServiceException,
                                       AmazonClientException

The BatchGetItem operation returns the attributes for multiple items from multiple tables using their primary keys. The maximum number of item attributes that can be retrieved for a single operation is 100. Also, the number of items retrieved is constrained by a 1 MB the size limit. If the response size limit is exceeded or a partial result is returned due to an internal processing failure, Amazon DynamoDB returns an UnprocessedKeys value so you can retry the operation starting with the next item to get. Amazon DynamoDB automatically adjusts the number of items returned per page to enforce this limit. For example, even if you ask to retrieve 100 items, but each individual item is 50 KB in size, the system returns 20 items and an appropriate UnprocessedKeys value so you can get the next page of results. If necessary, your application needs its own logic to assemble the pages of results into one set.

Parameters:

batchGetItemRequest - Container for the necessary parameters to execute the BatchGetItem service method on AmazonDynamoDB.

Returns:

The response from the BatchGetItem service method, as returned by AmazonDynamoDB.

Throws:

ProvisionedThroughputExceededException

InternalServerErrorException

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

listTables

ListTablesResult listTables()
                            throws AmazonServiceException,
                                   AmazonClientException

Returns a paginated list of table names created by the AWS Account of the caller in the AWS Region (e.g. us-east-1).

Returns:

The response from the ListTables service method, as returned by AmazonDynamoDB.

Throws:

InternalServerErrorException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by AmazonDynamoDB indicating either a problem with the data in the request, or a server side issue.

shutdown

void shutdown()

Shuts down this client object, releasing any resources that might be held open. This is an optional method, and callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client has been shutdown, it should not be used to make any more requests.

getCachedResponseMetadata

ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)

Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.

Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.

Parameters:

request - The originally executed request.

Returns:

The response metadata for the specified request, or null if none is available.