public class AmazonKinesisAsyncClient extends AmazonKinesisClient implements AmazonKinesisAsync
Amazon Kinesis is a managed service that scales elastically for real time processing of streaming big data.
jsonErrorUnmarshallersclient, clientConfiguration, endpoint, LOGGING_AWS_REQUEST_METRIC, requestHandler2s, timeOffset| Constructor and Description |
|---|
AmazonKinesisAsyncClient()
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis.
|
AmazonKinesisAsyncClient(AWSCredentials awsCredentials)
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis using the specified AWS account credentials.
|
AmazonKinesisAsyncClient(AWSCredentials awsCredentials,
ClientConfiguration clientConfiguration,
ExecutorService executorService)
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis using the specified AWS account credentials,
executor service, and client configuration options.
|
AmazonKinesisAsyncClient(AWSCredentials awsCredentials,
ExecutorService executorService)
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis using the specified AWS account credentials
and executor service.
|
AmazonKinesisAsyncClient(AWSCredentialsProvider awsCredentialsProvider)
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis using the specified AWS account credentials provider.
|
AmazonKinesisAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration)
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis using the specified AWS account credentials
provider and client configuration options.
|
AmazonKinesisAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration,
ExecutorService executorService)
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis using the specified AWS account credentials
provider, executor service, and client configuration options.
|
AmazonKinesisAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
ExecutorService executorService)
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis using the specified AWS account credentials provider
and executor service.
|
AmazonKinesisAsyncClient(ClientConfiguration clientConfiguration)
Constructs a new asynchronous client to invoke service methods on
AmazonKinesis.
|
| Modifier and Type | Method and Description |
|---|---|
Future<Void> |
createStreamAsync(CreateStreamRequest createStreamRequest)
This operation adds a new Amazon Kinesis stream to your AWS account.
|
Future<Void> |
createStreamAsync(CreateStreamRequest createStreamRequest,
AsyncHandler<CreateStreamRequest,Void> asyncHandler)
This operation adds a new Amazon Kinesis stream to your AWS account.
|
Future<Void> |
deleteStreamAsync(DeleteStreamRequest deleteStreamRequest)
This operation deletes a stream and all of its shards and data.
|
Future<Void> |
deleteStreamAsync(DeleteStreamRequest deleteStreamRequest,
AsyncHandler<DeleteStreamRequest,Void> asyncHandler)
This operation deletes a stream and all of its shards and data.
|
Future<DescribeStreamResult> |
describeStreamAsync(DescribeStreamRequest describeStreamRequest)
This operation returns the following information about the stream:
the current status of the stream, the stream Amazon Resource Name
(ARN), and an array of shard objects that comprise the stream.
|
Future<DescribeStreamResult> |
describeStreamAsync(DescribeStreamRequest describeStreamRequest,
AsyncHandler<DescribeStreamRequest,DescribeStreamResult> asyncHandler)
This operation returns the following information about the stream:
the current status of the stream, the stream Amazon Resource Name
(ARN), and an array of shard objects that comprise the stream.
|
ExecutorService |
getExecutorService()
Returns the executor service used by this async client to execute
requests.
|
Future<GetRecordsResult> |
getRecordsAsync(GetRecordsRequest getRecordsRequest)
This operation returns one or more data records from a shard.
|
Future<GetRecordsResult> |
getRecordsAsync(GetRecordsRequest getRecordsRequest,
AsyncHandler<GetRecordsRequest,GetRecordsResult> asyncHandler)
This operation returns one or more data records from a shard.
|
Future<GetShardIteratorResult> |
getShardIteratorAsync(GetShardIteratorRequest getShardIteratorRequest)
This operation returns a shard iterator in
ShardIterator
. |
Future<GetShardIteratorResult> |
getShardIteratorAsync(GetShardIteratorRequest getShardIteratorRequest,
AsyncHandler<GetShardIteratorRequest,GetShardIteratorResult> asyncHandler)
This operation returns a shard iterator in
ShardIterator
. |
Future<ListStreamsResult> |
listStreamsAsync(ListStreamsRequest listStreamsRequest)
This operation returns an array of the names of all the streams that
are associated with the AWS account making the
ListStreams request. |
Future<ListStreamsResult> |
listStreamsAsync(ListStreamsRequest listStreamsRequest,
AsyncHandler<ListStreamsRequest,ListStreamsResult> asyncHandler)
This operation returns an array of the names of all the streams that
are associated with the AWS account making the
ListStreams request. |
Future<Void> |
mergeShardsAsync(MergeShardsRequest mergeShardsRequest)
This operation merges two adjacent shards in a stream and combines
them into a single shard to reduce the stream's capacity to ingest and
transport data.
|
Future<Void> |
mergeShardsAsync(MergeShardsRequest mergeShardsRequest,
AsyncHandler<MergeShardsRequest,Void> asyncHandler)
This operation merges two adjacent shards in a stream and combines
them into a single shard to reduce the stream's capacity to ingest and
transport data.
|
Future<PutRecordResult> |
putRecordAsync(PutRecordRequest putRecordRequest)
This operation puts a data record into an Amazon Kinesis stream from
a producer.
|
Future<PutRecordResult> |
putRecordAsync(PutRecordRequest putRecordRequest,
AsyncHandler<PutRecordRequest,PutRecordResult> asyncHandler)
This operation puts a data record into an Amazon Kinesis stream from
a producer.
|
void |
shutdown()
Shuts down the client, releasing all managed resources.
|
Future<Void> |
splitShardAsync(SplitShardRequest splitShardRequest)
This operation splits a shard into two new shards in the stream, to
increase the stream's capacity to ingest and transport data.
|
Future<Void> |
splitShardAsync(SplitShardRequest splitShardRequest,
AsyncHandler<SplitShardRequest,Void> asyncHandler)
This operation splits a shard into two new shards in the stream, to
increase the stream's capacity to ingest and transport data.
|
createStream, createStream, deleteStream, deleteStream, describeStream, describeStream, describeStream, describeStream, getCachedResponseMetadata, getRecords, getShardIterator, getShardIterator, getShardIterator, listStreams, listStreams, listStreams, listStreams, mergeShards, mergeShards, putRecord, putRecord, putRecord, setEndpoint, setEndpoint, splitShard, splitShardaddRequestHandler, addRequestHandler, configSigner, configSigner, convertToHttpRequest, createExecutionContext, createExecutionContext, createExecutionContext, endClientExecution, endClientExecution, findRequestMetricCollector, getRequestMetricsCollector, getServiceAbbreviation, getServiceName, getServiceNameIntern, getSigner, getSignerByURI, getSignerRegionOverride, getTimeOffset, isProfilingEnabled, isRequestMetricsEnabled, removeRequestHandler, removeRequestHandler, requestMetricCollector, setConfiguration, setRegion, setServiceNameIntern, setSignerRegionOverride, setTimeOffset, withTimeOffsetclone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitcreateStream, createStream, deleteStream, deleteStream, describeStream, describeStream, describeStream, describeStream, getCachedResponseMetadata, getRecords, getShardIterator, getShardIterator, getShardIterator, listStreams, listStreams, listStreams, listStreams, mergeShards, mergeShards, putRecord, putRecord, putRecord, setEndpoint, setRegion, splitShard, splitShardpublic AmazonKinesisAsyncClient()
All service calls made using this new client object are blocking, and will not return until the service call completes.
DefaultAWSCredentialsProviderChainpublic AmazonKinesisAsyncClient(ClientConfiguration clientConfiguration)
All service calls made using this new client object are blocking, and will not return until the service call completes.
clientConfiguration - The client configuration options controlling how this
client connects to AmazonKinesis
(ex: proxy settings, retry counts, etc.).DefaultAWSCredentialsProviderChainpublic AmazonKinesisAsyncClient(AWSCredentials awsCredentials)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentials - The AWS credentials (access key ID and secret key) to use
when authenticating with AWS services.public AmazonKinesisAsyncClient(AWSCredentials awsCredentials, ExecutorService executorService)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentials - The AWS credentials (access key ID and secret key) to use
when authenticating with AWS services.executorService - The executor service by which all asynchronous requests will
be executed.public AmazonKinesisAsyncClient(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration, ExecutorService executorService)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentials - The AWS credentials (access key ID and secret key) to use
when authenticating with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy
settings, etc).executorService - The executor service by which all asynchronous requests will
be executed.public AmazonKinesisAsyncClient(AWSCredentialsProvider awsCredentialsProvider)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentialsProvider - The AWS credentials provider which will provide credentials
to authenticate requests with AWS services.public AmazonKinesisAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ExecutorService executorService)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentialsProvider - The AWS credentials provider which will provide credentials
to authenticate requests with AWS services.executorService - The executor service by which all asynchronous requests will
be executed.public AmazonKinesisAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentialsProvider - The AWS credentials provider which will provide credentials
to authenticate requests with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy
settings, etc).public AmazonKinesisAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration, ExecutorService executorService)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentialsProvider - The AWS credentials provider which will provide credentials
to authenticate requests with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy
settings, etc).executorService - The executor service by which all asynchronous requests will
be executed.public ExecutorService getExecutorService()
public void shutdown()
shutdown in interface AmazonKinesisshutdown in class AmazonWebServiceClientpublic Future<DescribeStreamResult> describeStreamAsync(DescribeStreamRequest describeStreamRequest) throws AmazonServiceException, AmazonClientException
This operation returns the following information about the stream: the current status of the stream, the stream Amazon Resource Name (ARN), and an array of shard objects that comprise the stream. For each shard object there is information about the hash key and sequence number ranges that the shard spans, and the IDs of any earlier shards that played in a role in a MergeShards or SplitShard operation that created the shard. A sequence number is the identifier associated with every record ingested in the Amazon Kinesis stream. The sequence number is assigned by the Amazon Kinesis service when a record is put into the stream.
You can limit the number of returned shards using the
Limit parameter. The number of shards in a stream may be
too large to return from a single call to DescribeStream
. You can detect this by using the HasMoreShards flag in
the returned output. HasMoreShards is set to
true when there is more data available.
If there are more shards available, you can request more shards by
using the shard ID of the last shard returned by the
DescribeStream request, in the
ExclusiveStartShardId parameter in a subsequent request
to DescribeStream . DescribeStream is a
paginated operation.
DescribeStream has a limit of 10 transactions per second
per account.
describeStreamAsync in interface AmazonKinesisAsyncdescribeStreamRequest - Container for the necessary parameters to
execute the DescribeStream operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<DescribeStreamResult> describeStreamAsync(DescribeStreamRequest describeStreamRequest, AsyncHandler<DescribeStreamRequest,DescribeStreamResult> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation returns the following information about the stream: the current status of the stream, the stream Amazon Resource Name (ARN), and an array of shard objects that comprise the stream. For each shard object there is information about the hash key and sequence number ranges that the shard spans, and the IDs of any earlier shards that played in a role in a MergeShards or SplitShard operation that created the shard. A sequence number is the identifier associated with every record ingested in the Amazon Kinesis stream. The sequence number is assigned by the Amazon Kinesis service when a record is put into the stream.
You can limit the number of returned shards using the
Limit parameter. The number of shards in a stream may be
too large to return from a single call to DescribeStream
. You can detect this by using the HasMoreShards flag in
the returned output. HasMoreShards is set to
true when there is more data available.
If there are more shards available, you can request more shards by
using the shard ID of the last shard returned by the
DescribeStream request, in the
ExclusiveStartShardId parameter in a subsequent request
to DescribeStream . DescribeStream is a
paginated operation.
DescribeStream has a limit of 10 transactions per second
per account.
describeStreamAsync in interface AmazonKinesisAsyncdescribeStreamRequest - Container for the necessary parameters to
execute the DescribeStream operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<GetShardIteratorResult> getShardIteratorAsync(GetShardIteratorRequest getShardIteratorRequest) throws AmazonServiceException, AmazonClientException
This operation returns a shard iterator in ShardIterator
. The shard iterator specifies the position in the shard from which
you want to start reading data records sequentially. A shard iterator
specifies this position using the sequence number of a data record in
a shard. A sequence number is the identifier associated with every
record ingested in the Amazon Kinesis stream. The sequence number is
assigned by the Amazon Kinesis service when a record is put into the
stream.
You must specify the shard iterator type in the
GetShardIterator request. For example, you can set the
ShardIteratorType parameter to read exactly from the
position denoted by a specific sequence number by using the
AT_SEQUENCE_NUMBER shard iterator type, or right after the sequence
number by using the AFTER_SEQUENCE_NUMBER shard iterator type, using
sequence numbers returned by earlier PutRecord, GetRecords or
DescribeStream requests. You can specify the shard iterator type
TRIM_HORIZON in the request to cause ShardIterator to
point to the last untrimmed record in the shard in the system, which
is the oldest data record in the shard. Or you can point to just after
the most recent record in the shard, by using the shard iterator type
LATEST, so that you always read the most recent data in the shard.
Note: Each shard iterator expires five minutes after it is returned to the requester.
When you repeatedly read from an Amazon Kinesis stream use a
GetShardIterator request to get the first shard iterator to to use in
your first GetRecords request and then use the shard
iterator returned by the GetRecords request in
NextShardIterator for subsequent reads. A new shard
iterator is returned by every GetRecords request in
NextShardIterator , which you use in the
ShardIterator parameter of the next
GetRecords request.
If a GetShardIterator request is made too often, you
will receive a ProvisionedThroughputExceededException .
For more information about throughput limits, see the
Amazon Kinesis Developer Guide
.
GetShardIterator can return null for its
ShardIterator to indicate that the shard has been closed
and that the requested iterator will return no more data. A shard can
be closed by a SplitShard or MergeShards operation.
GetShardIterator has a limit of 5 transactions per
second per account per open shard.
getShardIteratorAsync in interface AmazonKinesisAsyncgetShardIteratorRequest - Container for the necessary parameters
to execute the GetShardIterator operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<GetShardIteratorResult> getShardIteratorAsync(GetShardIteratorRequest getShardIteratorRequest, AsyncHandler<GetShardIteratorRequest,GetShardIteratorResult> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation returns a shard iterator in ShardIterator
. The shard iterator specifies the position in the shard from which
you want to start reading data records sequentially. A shard iterator
specifies this position using the sequence number of a data record in
a shard. A sequence number is the identifier associated with every
record ingested in the Amazon Kinesis stream. The sequence number is
assigned by the Amazon Kinesis service when a record is put into the
stream.
You must specify the shard iterator type in the
GetShardIterator request. For example, you can set the
ShardIteratorType parameter to read exactly from the
position denoted by a specific sequence number by using the
AT_SEQUENCE_NUMBER shard iterator type, or right after the sequence
number by using the AFTER_SEQUENCE_NUMBER shard iterator type, using
sequence numbers returned by earlier PutRecord, GetRecords or
DescribeStream requests. You can specify the shard iterator type
TRIM_HORIZON in the request to cause ShardIterator to
point to the last untrimmed record in the shard in the system, which
is the oldest data record in the shard. Or you can point to just after
the most recent record in the shard, by using the shard iterator type
LATEST, so that you always read the most recent data in the shard.
Note: Each shard iterator expires five minutes after it is returned to the requester.
When you repeatedly read from an Amazon Kinesis stream use a
GetShardIterator request to get the first shard iterator to to use in
your first GetRecords request and then use the shard
iterator returned by the GetRecords request in
NextShardIterator for subsequent reads. A new shard
iterator is returned by every GetRecords request in
NextShardIterator , which you use in the
ShardIterator parameter of the next
GetRecords request.
If a GetShardIterator request is made too often, you
will receive a ProvisionedThroughputExceededException .
For more information about throughput limits, see the
Amazon Kinesis Developer Guide
.
GetShardIterator can return null for its
ShardIterator to indicate that the shard has been closed
and that the requested iterator will return no more data. A shard can
be closed by a SplitShard or MergeShards operation.
GetShardIterator has a limit of 5 transactions per
second per account per open shard.
getShardIteratorAsync in interface AmazonKinesisAsyncgetShardIteratorRequest - Container for the necessary parameters
to execute the GetShardIterator operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<PutRecordResult> putRecordAsync(PutRecordRequest putRecordRequest) throws AmazonServiceException, AmazonClientException
This operation puts a data record into an Amazon Kinesis stream from
a producer. This operation must be called to send data from the
producer into the Amazon Kinesis stream for real-time ingestion and
subsequent processing. The PutRecord operation requires
the name of the stream that captures, stores, and transports the data;
a partition key; and the data blob itself. The data blob could be a
segment from a log file, geographic/location data, website clickstream
data, or any other data type.
The partition key is used to distribute data across shards. Amazon Kinesis segregates the data records that belong to a data stream into multiple shards, using the partition key associated with each data record to determine which shard a given data record belongs to.
Partition keys are Unicode strings, with a maximum length limit of
256 bytes. An MD5 hash function is used to map partition keys to
128-bit integer values and to map associated data records to shards
using the hash key ranges of the shards. You can override hashing the
partition key to determine the shard by explicitly specifying a hash
value using the ExplicitHashKey parameter. For more
information, see the
Amazon Kinesis Developer Guide
.
PutRecord returns the shard ID of where the data record
was placed and the sequence number that was assigned to the data
record.
Sequence numbers generally increase over time. To guarantee strictly
increasing ordering, use the SequenceNumberForOrdering
parameter. For more information, see the
Amazon Kinesis Developer Guide
.
If a PutRecord request cannot be processed because of
insufficient provisioned throughput on the shard involved in the
request, PutRecord throws
ProvisionedThroughputExceededException .
Data records are accessible for only 24 hours from the time that they are added to an Amazon Kinesis stream.
putRecordAsync in interface AmazonKinesisAsyncputRecordRequest - Container for the necessary parameters to
execute the PutRecord operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<PutRecordResult> putRecordAsync(PutRecordRequest putRecordRequest, AsyncHandler<PutRecordRequest,PutRecordResult> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation puts a data record into an Amazon Kinesis stream from
a producer. This operation must be called to send data from the
producer into the Amazon Kinesis stream for real-time ingestion and
subsequent processing. The PutRecord operation requires
the name of the stream that captures, stores, and transports the data;
a partition key; and the data blob itself. The data blob could be a
segment from a log file, geographic/location data, website clickstream
data, or any other data type.
The partition key is used to distribute data across shards. Amazon Kinesis segregates the data records that belong to a data stream into multiple shards, using the partition key associated with each data record to determine which shard a given data record belongs to.
Partition keys are Unicode strings, with a maximum length limit of
256 bytes. An MD5 hash function is used to map partition keys to
128-bit integer values and to map associated data records to shards
using the hash key ranges of the shards. You can override hashing the
partition key to determine the shard by explicitly specifying a hash
value using the ExplicitHashKey parameter. For more
information, see the
Amazon Kinesis Developer Guide
.
PutRecord returns the shard ID of where the data record
was placed and the sequence number that was assigned to the data
record.
Sequence numbers generally increase over time. To guarantee strictly
increasing ordering, use the SequenceNumberForOrdering
parameter. For more information, see the
Amazon Kinesis Developer Guide
.
If a PutRecord request cannot be processed because of
insufficient provisioned throughput on the shard involved in the
request, PutRecord throws
ProvisionedThroughputExceededException .
Data records are accessible for only 24 hours from the time that they are added to an Amazon Kinesis stream.
putRecordAsync in interface AmazonKinesisAsyncputRecordRequest - Container for the necessary parameters to
execute the PutRecord operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<GetRecordsResult> getRecordsAsync(GetRecordsRequest getRecordsRequest) throws AmazonServiceException, AmazonClientException
This operation returns one or more data records from a shard. A
GetRecords operation request can retrieve up to 10 MB of
data.
You specify a shard iterator for the shard that you want to read data
from in the ShardIterator parameter. The shard iterator
specifies the position in the shard from which you want to start
reading data records sequentially. A shard iterator specifies this
position using the sequence number of a data record in the shard. For
more information about the shard iterator, see GetShardIterator.
GetRecords may return a partial result if the response
size limit is exceeded. You will get an error, but not a partial
result if the shard's provisioned throughput is exceeded, the shard
iterator has expired, or an internal processing failure has occurred.
Clients can request a smaller amount of data by specifying a maximum
number of returned records using the Limit parameter. The
Limit parameter can be set to an integer value of up to
10,000. If you set the value to an integer greater than 10,000, you
will receive InvalidArgumentException .
A new shard iterator is returned by every GetRecords
request in NextShardIterator , which you use in the
ShardIterator parameter of the next
GetRecords request. When you repeatedly read from an
Amazon Kinesis stream use a GetShardIterator request to get the first
shard iterator to use in your first GetRecords request
and then use the shard iterator returned in
NextShardIterator for subsequent reads.
GetRecords can return null for the
NextShardIterator to reflect that the shard has been
closed and that the requested shard iterator would never have returned
more data.
If no items can be processed because of insufficient provisioned
throughput on the shard involved in the request,
GetRecords throws
ProvisionedThroughputExceededException .
getRecordsAsync in interface AmazonKinesisAsyncgetRecordsRequest - Container for the necessary parameters to
execute the GetRecords operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<GetRecordsResult> getRecordsAsync(GetRecordsRequest getRecordsRequest, AsyncHandler<GetRecordsRequest,GetRecordsResult> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation returns one or more data records from a shard. A
GetRecords operation request can retrieve up to 10 MB of
data.
You specify a shard iterator for the shard that you want to read data
from in the ShardIterator parameter. The shard iterator
specifies the position in the shard from which you want to start
reading data records sequentially. A shard iterator specifies this
position using the sequence number of a data record in the shard. For
more information about the shard iterator, see GetShardIterator.
GetRecords may return a partial result if the response
size limit is exceeded. You will get an error, but not a partial
result if the shard's provisioned throughput is exceeded, the shard
iterator has expired, or an internal processing failure has occurred.
Clients can request a smaller amount of data by specifying a maximum
number of returned records using the Limit parameter. The
Limit parameter can be set to an integer value of up to
10,000. If you set the value to an integer greater than 10,000, you
will receive InvalidArgumentException .
A new shard iterator is returned by every GetRecords
request in NextShardIterator , which you use in the
ShardIterator parameter of the next
GetRecords request. When you repeatedly read from an
Amazon Kinesis stream use a GetShardIterator request to get the first
shard iterator to use in your first GetRecords request
and then use the shard iterator returned in
NextShardIterator for subsequent reads.
GetRecords can return null for the
NextShardIterator to reflect that the shard has been
closed and that the requested shard iterator would never have returned
more data.
If no items can be processed because of insufficient provisioned
throughput on the shard involved in the request,
GetRecords throws
ProvisionedThroughputExceededException .
getRecordsAsync in interface AmazonKinesisAsyncgetRecordsRequest - Container for the necessary parameters to
execute the GetRecords operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<Void> splitShardAsync(SplitShardRequest splitShardRequest) throws AmazonServiceException, AmazonClientException
This operation splits a shard into two new shards in the stream, to
increase the stream's capacity to ingest and transport data.
SplitShard is called when there is a need to increase the
overall capacity of stream because of an expected increase in the
volume of data records being ingested.
SplitShard can also be used when a given shard appears
to be approaching its maximum utilization, for example, when the set
of producers sending data into the specific shard are suddenly sending
more than previously anticipated. You can also call the
SplitShard operation to increase stream capacity, so that
more Amazon Kinesis applications can simultaneously read data from the
stream for real-time processing.
The SplitShard operation requires that you specify the
shard to be split and the new hash key, which is the position in the
shard where the shard gets split in two. In many cases, the new hash
key might simply be the average of the beginning and ending hash key,
but it can be any hash key value in the range being mapped into the
shard. For more information about splitting shards, see the
Amazon Kinesis Developer Guide
.
You can use the DescribeStream operation to determine the shard ID
and hash key values for the ShardToSplit and
NewStartingHashKey parameters that are specified in the
SplitShard request.
SplitShard is an asynchronous operation. Upon receiving
a SplitShard request, Amazon Kinesis immediately returns
a response and sets the stream status to UPDATING. After the operation
is completed, Amazon Kinesis sets the stream status to ACTIVE. Read
and write operations continue to work while the stream is in the
UPDATING state.
You can use DescribeStream to check the status of the
stream, which is returned in StreamStatus . If the stream
is in the ACTIVE state, you can call SplitShard . If a
stream is in CREATING or UPDATING or DELETING states, then Amazon
Kinesis returns a ResourceInUseException .
If the specified stream does not exist, Amazon Kinesis returns a
ResourceNotFoundException . If you try to create more
shards than are authorized for your account, you receive a
LimitExceededException .
Note: The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account.
If you try to operate on too many streams in parallel using
CreateStream, DeleteStream, MergeShards or SplitShard, you will
receive a LimitExceededException .
SplitShard has limit of 5 transactions per second per
account.
splitShardAsync in interface AmazonKinesisAsyncsplitShardRequest - Container for the necessary parameters to
execute the SplitShard operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<Void> splitShardAsync(SplitShardRequest splitShardRequest, AsyncHandler<SplitShardRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation splits a shard into two new shards in the stream, to
increase the stream's capacity to ingest and transport data.
SplitShard is called when there is a need to increase the
overall capacity of stream because of an expected increase in the
volume of data records being ingested.
SplitShard can also be used when a given shard appears
to be approaching its maximum utilization, for example, when the set
of producers sending data into the specific shard are suddenly sending
more than previously anticipated. You can also call the
SplitShard operation to increase stream capacity, so that
more Amazon Kinesis applications can simultaneously read data from the
stream for real-time processing.
The SplitShard operation requires that you specify the
shard to be split and the new hash key, which is the position in the
shard where the shard gets split in two. In many cases, the new hash
key might simply be the average of the beginning and ending hash key,
but it can be any hash key value in the range being mapped into the
shard. For more information about splitting shards, see the
Amazon Kinesis Developer Guide
.
You can use the DescribeStream operation to determine the shard ID
and hash key values for the ShardToSplit and
NewStartingHashKey parameters that are specified in the
SplitShard request.
SplitShard is an asynchronous operation. Upon receiving
a SplitShard request, Amazon Kinesis immediately returns
a response and sets the stream status to UPDATING. After the operation
is completed, Amazon Kinesis sets the stream status to ACTIVE. Read
and write operations continue to work while the stream is in the
UPDATING state.
You can use DescribeStream to check the status of the
stream, which is returned in StreamStatus . If the stream
is in the ACTIVE state, you can call SplitShard . If a
stream is in CREATING or UPDATING or DELETING states, then Amazon
Kinesis returns a ResourceInUseException .
If the specified stream does not exist, Amazon Kinesis returns a
ResourceNotFoundException . If you try to create more
shards than are authorized for your account, you receive a
LimitExceededException .
Note: The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account.
If you try to operate on too many streams in parallel using
CreateStream, DeleteStream, MergeShards or SplitShard, you will
receive a LimitExceededException .
SplitShard has limit of 5 transactions per second per
account.
splitShardAsync in interface AmazonKinesisAsyncsplitShardRequest - Container for the necessary parameters to
execute the SplitShard operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<Void> createStreamAsync(CreateStreamRequest createStreamRequest) throws AmazonServiceException, AmazonClientException
This operation adds a new Amazon Kinesis stream to your AWS account. A stream captures and transports data records that are continuously emitted from different data sources or producers . Scale-out within an Amazon Kinesis stream is explicitly supported by means of shards, which are uniquely identified groups of data records in an Amazon Kinesis stream.
You specify and control the number of shards that a stream is composed of. Each open shard can support up to 5 read transactions per second, up to a maximum total of 2 MB of data read per second. Each shard can support up to 1000 write transactions per second, up to a maximum total of 1 MB data written per second. You can add shards to a stream if the amount of data input increases and you can remove shards if the amount of data input decreases.
The stream name identifies the stream. The name is scoped to the AWS account used by the application. It is also scoped by region. That is, two streams in two different accounts can have the same name, and two streams in the same account, but in two different regions, can have the same name.
CreateStream is an asynchronous operation. Upon
receiving a CreateStream request, Amazon Kinesis
immediately returns and sets the stream status to CREATING. After the
stream is created, Amazon Kinesis sets the stream status to ACTIVE.
You should perform read and write operations only on an ACTIVE stream.
You receive a LimitExceededException when making a
CreateStream request if you try to do one of the
following:
Note: The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account.
You can use the DescribeStream operation to check the
stream status, which is returned in StreamStatus .
CreateStream has a limit of 5 transactions per second
per account.
createStreamAsync in interface AmazonKinesisAsynccreateStreamRequest - Container for the necessary parameters to
execute the CreateStream operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<Void> createStreamAsync(CreateStreamRequest createStreamRequest, AsyncHandler<CreateStreamRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation adds a new Amazon Kinesis stream to your AWS account. A stream captures and transports data records that are continuously emitted from different data sources or producers . Scale-out within an Amazon Kinesis stream is explicitly supported by means of shards, which are uniquely identified groups of data records in an Amazon Kinesis stream.
You specify and control the number of shards that a stream is composed of. Each open shard can support up to 5 read transactions per second, up to a maximum total of 2 MB of data read per second. Each shard can support up to 1000 write transactions per second, up to a maximum total of 1 MB data written per second. You can add shards to a stream if the amount of data input increases and you can remove shards if the amount of data input decreases.
The stream name identifies the stream. The name is scoped to the AWS account used by the application. It is also scoped by region. That is, two streams in two different accounts can have the same name, and two streams in the same account, but in two different regions, can have the same name.
CreateStream is an asynchronous operation. Upon
receiving a CreateStream request, Amazon Kinesis
immediately returns and sets the stream status to CREATING. After the
stream is created, Amazon Kinesis sets the stream status to ACTIVE.
You should perform read and write operations only on an ACTIVE stream.
You receive a LimitExceededException when making a
CreateStream request if you try to do one of the
following:
Note: The default limit for an AWS account is 10 shards per stream. If you need to create a stream with more than 10 shards, contact AWS Support to increase the limit on your account.
You can use the DescribeStream operation to check the
stream status, which is returned in StreamStatus .
CreateStream has a limit of 5 transactions per second
per account.
createStreamAsync in interface AmazonKinesisAsynccreateStreamRequest - Container for the necessary parameters to
execute the CreateStream operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<Void> deleteStreamAsync(DeleteStreamRequest deleteStreamRequest) throws AmazonServiceException, AmazonClientException
This operation deletes a stream and all of its shards and data. You
must shut down any applications that are operating on the stream
before you delete the stream. If an application attempts to operate on
a deleted stream, it will receive the exception
ResourceNotFoundException .
If the stream is in the ACTIVE state, you can delete it. After a
DeleteStream request, the specified stream is in the
DELETING state until Amazon Kinesis completes the deletion.
Note: Amazon Kinesis might continue to accept data read and write operations, such as PutRecord and GetRecords, on a stream in the DELETING state until the stream deletion is complete.
When you delete a stream, any shards in that stream are also deleted.
You can use the DescribeStream operation to check the state of the
stream, which is returned in StreamStatus .
DeleteStream has a limit of 5 transactions per second
per account.
deleteStreamAsync in interface AmazonKinesisAsyncdeleteStreamRequest - Container for the necessary parameters to
execute the DeleteStream operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<Void> deleteStreamAsync(DeleteStreamRequest deleteStreamRequest, AsyncHandler<DeleteStreamRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation deletes a stream and all of its shards and data. You
must shut down any applications that are operating on the stream
before you delete the stream. If an application attempts to operate on
a deleted stream, it will receive the exception
ResourceNotFoundException .
If the stream is in the ACTIVE state, you can delete it. After a
DeleteStream request, the specified stream is in the
DELETING state until Amazon Kinesis completes the deletion.
Note: Amazon Kinesis might continue to accept data read and write operations, such as PutRecord and GetRecords, on a stream in the DELETING state until the stream deletion is complete.
When you delete a stream, any shards in that stream are also deleted.
You can use the DescribeStream operation to check the state of the
stream, which is returned in StreamStatus .
DeleteStream has a limit of 5 transactions per second
per account.
deleteStreamAsync in interface AmazonKinesisAsyncdeleteStreamRequest - Container for the necessary parameters to
execute the DeleteStream operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<ListStreamsResult> listStreamsAsync(ListStreamsRequest listStreamsRequest) throws AmazonServiceException, AmazonClientException
This operation returns an array of the names of all the streams that
are associated with the AWS account making the
ListStreams request. A given AWS account can have many
streams active at one time.
The number of streams may be too large to return from a single call
to ListStreams . You can limit the number of returned
streams using the Limit parameter. If you do not specify
a value for the Limit parameter, Amazon Kinesis uses the
default limit, which is currently 10.
You can detect if there are more streams available to list by using
the HasMoreStreams flag from the returned output. If
there are more streams available, you can request more streams by
using the name of the last stream returned by the
ListStreams request in the
ExclusiveStartStreamName parameter in a subsequent
request to ListStreams . The group of stream names
returned by the subsequent request is then added to the list. You can
continue this process until all the stream names have been collected
in the list.
ListStreams has a limit of 5 transactions per second per
account.
listStreamsAsync in interface AmazonKinesisAsynclistStreamsRequest - Container for the necessary parameters to
execute the ListStreams operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<ListStreamsResult> listStreamsAsync(ListStreamsRequest listStreamsRequest, AsyncHandler<ListStreamsRequest,ListStreamsResult> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation returns an array of the names of all the streams that
are associated with the AWS account making the
ListStreams request. A given AWS account can have many
streams active at one time.
The number of streams may be too large to return from a single call
to ListStreams . You can limit the number of returned
streams using the Limit parameter. If you do not specify
a value for the Limit parameter, Amazon Kinesis uses the
default limit, which is currently 10.
You can detect if there are more streams available to list by using
the HasMoreStreams flag from the returned output. If
there are more streams available, you can request more streams by
using the name of the last stream returned by the
ListStreams request in the
ExclusiveStartStreamName parameter in a subsequent
request to ListStreams . The group of stream names
returned by the subsequent request is then added to the list. You can
continue this process until all the stream names have been collected
in the list.
ListStreams has a limit of 5 transactions per second per
account.
listStreamsAsync in interface AmazonKinesisAsynclistStreamsRequest - Container for the necessary parameters to
execute the ListStreams operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<Void> mergeShardsAsync(MergeShardsRequest mergeShardsRequest) throws AmazonServiceException, AmazonClientException
This operation merges two adjacent shards in a stream and combines them into a single shard to reduce the stream's capacity to ingest and transport data. Two shards are considered adjacent if the union of the hash key ranges for the two shards form a contiguous set with no gaps. For example, if you have two shards, one with a hash key range of 276...381 and the other with a hash key range of 382...454, then you could merge these two shards into a single shard that would have a hash key range of 276...454. After the merge, the single child shard receives data for all hash key values covered by the two parent shards.
MergeShards is called when there is a need to reduce the
overall capacity of a stream because of excess capacity that is not
being used. The operation requires that you specify the shard to be
merged and the adjacent shard for a given stream. For more information
about merging shards, see the
Amazon Kinesis Developer Guide
.
If the stream is in the ACTIVE state, you can call
MergeShards . If a stream is in CREATING or UPDATING or
DELETING states, then Amazon Kinesis returns a
ResourceInUseException . If the specified stream does not
exist, Amazon Kinesis returns a ResourceNotFoundException
.
You can use the DescribeStream operation to check the state of the
stream, which is returned in StreamStatus .
MergeShards is an asynchronous operation. Upon receiving
a MergeShards request, Amazon Kinesis immediately returns
a response and sets the StreamStatus to UPDATING. After
the operation is completed, Amazon Kinesis sets the
StreamStatus to ACTIVE. Read and write operations
continue to work while the stream is in the UPDATING state.
You use the DescribeStream operation to determine the shard IDs that
are specified in the MergeShards request.
If you try to operate on too many streams in parallel using
CreateStream, DeleteStream, MergeShards or SplitShard,
you will receive a LimitExceededException .
MergeShards has limit of 5 transactions per second per
account.
mergeShardsAsync in interface AmazonKinesisAsyncmergeShardsRequest - Container for the necessary parameters to
execute the MergeShards operation on AmazonKinesis.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.public Future<Void> mergeShardsAsync(MergeShardsRequest mergeShardsRequest, AsyncHandler<MergeShardsRequest,Void> asyncHandler) throws AmazonServiceException, AmazonClientException
This operation merges two adjacent shards in a stream and combines them into a single shard to reduce the stream's capacity to ingest and transport data. Two shards are considered adjacent if the union of the hash key ranges for the two shards form a contiguous set with no gaps. For example, if you have two shards, one with a hash key range of 276...381 and the other with a hash key range of 382...454, then you could merge these two shards into a single shard that would have a hash key range of 276...454. After the merge, the single child shard receives data for all hash key values covered by the two parent shards.
MergeShards is called when there is a need to reduce the
overall capacity of a stream because of excess capacity that is not
being used. The operation requires that you specify the shard to be
merged and the adjacent shard for a given stream. For more information
about merging shards, see the
Amazon Kinesis Developer Guide
.
If the stream is in the ACTIVE state, you can call
MergeShards . If a stream is in CREATING or UPDATING or
DELETING states, then Amazon Kinesis returns a
ResourceInUseException . If the specified stream does not
exist, Amazon Kinesis returns a ResourceNotFoundException
.
You can use the DescribeStream operation to check the state of the
stream, which is returned in StreamStatus .
MergeShards is an asynchronous operation. Upon receiving
a MergeShards request, Amazon Kinesis immediately returns
a response and sets the StreamStatus to UPDATING. After
the operation is completed, Amazon Kinesis sets the
StreamStatus to ACTIVE. Read and write operations
continue to work while the stream is in the UPDATING state.
You use the DescribeStream operation to determine the shard IDs that
are specified in the MergeShards request.
If you try to operate on too many streams in parallel using
CreateStream, DeleteStream, MergeShards or SplitShard,
you will receive a LimitExceededException .
MergeShards has limit of 5 transactions per second per
account.
mergeShardsAsync in interface AmazonKinesisAsyncmergeShardsRequest - Container for the necessary parameters to
execute the MergeShards operation on AmazonKinesis.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonKinesis indicating
either a problem with the data in the request, or a server side issue.Copyright © 2014. All rights reserved.