com.google.protobuf.compiler

Interface PluginProtos.CodeGeneratorResponse.FileOrBuilder

All Superinterfaces:

MessageLiteOrBuilder, MessageOrBuilder

All Known Implementing Classes:

PluginProtos.CodeGeneratorResponse.File, PluginProtos.CodeGeneratorResponse.File.Builder

Enclosing class:

PluginProtos.CodeGeneratorResponse

public static interface PluginProtos.CodeGeneratorResponse.FileOrBuilder
extends MessageOrBuilder

Method Summary

Methods

Modifier and Type	Method and Description
String	getContent() The file contents.
ByteString	getContentBytes() The file contents.
String	getInsertionPoint() If non-empty, indicates that the named file should already exist, and the content here is to be inserted into that file at a defined insertion point.
ByteString	getInsertionPointBytes() If non-empty, indicates that the named file should already exist, and the content here is to be inserted into that file at a defined insertion point.
String	getName() The file name, relative to the output directory.
ByteString	getNameBytes() The file name, relative to the output directory.
boolean	hasContent() The file contents.
boolean	hasInsertionPoint() If non-empty, indicates that the named file should already exist, and the content here is to be inserted into that file at a defined insertion point.
boolean	hasName() The file name, relative to the output directory.

Methods inherited from interface com.google.protobuf.MessageOrBuilder

findInitializationErrors, getAllFields, getDefaultInstanceForType, getDescriptorForType, getField, getInitializationErrorString, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof

Methods inherited from interface com.google.protobuf.MessageLiteOrBuilder

isInitialized

Method Detail

hasName

boolean hasName()

 The file name, relative to the output directory.  The name must not
 contain "." or ".." components and must be relative, not be absolute (so,
 the file cannot lie outside the output directory).  "/" must be used as
 the path separator, not "\".
 If the name is omitted, the content will be appended to the previous
 file.  This allows the generator to break large files into small chunks,
 and allows the generated text to be streamed back to protoc so that large
 files need not reside completely in memory at one time.  Note that as of
 this writing protoc does not optimize for this -- it will read the entire
 CodeGeneratorResponse before writing files to disk.
 

optional string name = 1;

getName

String getName()

 The file name, relative to the output directory.  The name must not
 contain "." or ".." components and must be relative, not be absolute (so,
 the file cannot lie outside the output directory).  "/" must be used as
 the path separator, not "\".
 If the name is omitted, the content will be appended to the previous
 file.  This allows the generator to break large files into small chunks,
 and allows the generated text to be streamed back to protoc so that large
 files need not reside completely in memory at one time.  Note that as of
 this writing protoc does not optimize for this -- it will read the entire
 CodeGeneratorResponse before writing files to disk.
 

optional string name = 1;

getNameBytes

ByteString getNameBytes()

 The file name, relative to the output directory.  The name must not
 contain "." or ".." components and must be relative, not be absolute (so,
 the file cannot lie outside the output directory).  "/" must be used as
 the path separator, not "\".
 If the name is omitted, the content will be appended to the previous
 file.  This allows the generator to break large files into small chunks,
 and allows the generated text to be streamed back to protoc so that large
 files need not reside completely in memory at one time.  Note that as of
 this writing protoc does not optimize for this -- it will read the entire
 CodeGeneratorResponse before writing files to disk.
 

optional string name = 1;

hasInsertionPoint

boolean hasInsertionPoint()

 If non-empty, indicates that the named file should already exist, and the
 content here is to be inserted into that file at a defined insertion
 point.  This feature allows a code generator to extend the output
 produced by another code generator.  The original generator may provide
 insertion points by placing special annotations in the file that look
 like:
   @@protoc_insertion_point(NAME)
 The annotation can have arbitrary text before and after it on the line,
 which allows it to be placed in a comment.  NAME should be replaced with
 an identifier naming the point -- this is what other generators will use
 as the insertion_point.  Code inserted at this point will be placed
 immediately above the line containing the insertion point (thus multiple
 insertions to the same point will come out in the order they were added).
 The double-@ is intended to make it unlikely that the generated code
 could contain things that look like insertion points by accident.
 For example, the C++ code generator places the following line in the
 .pb.h files that it generates:
   // @@protoc_insertion_point(namespace_scope)
 This line appears within the scope of the file's package namespace, but
 outside of any particular class.  Another plugin can then specify the
 insertion_point "namespace_scope" to generate additional classes or
 other declarations that should be placed in this scope.
 Note that if the line containing the insertion point begins with
 whitespace, the same whitespace will be added to every line of the
 inserted text.  This is useful for languages like Python, where
 indentation matters.  In these languages, the insertion point comment
 should be indented the same amount as any inserted code will need to be
 in order to work correctly in that context.
 The code generator that generates the initial file and the one which
 inserts into it must both run as part of a single invocation of protoc.
 Code generators are executed in the order in which they appear on the
 command line.
 If |insertion_point| is present, |name| must also be present.
 

optional string insertion_point = 2;

getInsertionPoint

String getInsertionPoint()

 If non-empty, indicates that the named file should already exist, and the
 content here is to be inserted into that file at a defined insertion
 point.  This feature allows a code generator to extend the output
 produced by another code generator.  The original generator may provide
 insertion points by placing special annotations in the file that look
 like:
   @@protoc_insertion_point(NAME)
 The annotation can have arbitrary text before and after it on the line,
 which allows it to be placed in a comment.  NAME should be replaced with
 an identifier naming the point -- this is what other generators will use
 as the insertion_point.  Code inserted at this point will be placed
 immediately above the line containing the insertion point (thus multiple
 insertions to the same point will come out in the order they were added).
 The double-@ is intended to make it unlikely that the generated code
 could contain things that look like insertion points by accident.
 For example, the C++ code generator places the following line in the
 .pb.h files that it generates:
   // @@protoc_insertion_point(namespace_scope)
 This line appears within the scope of the file's package namespace, but
 outside of any particular class.  Another plugin can then specify the
 insertion_point "namespace_scope" to generate additional classes or
 other declarations that should be placed in this scope.
 Note that if the line containing the insertion point begins with
 whitespace, the same whitespace will be added to every line of the
 inserted text.  This is useful for languages like Python, where
 indentation matters.  In these languages, the insertion point comment
 should be indented the same amount as any inserted code will need to be
 in order to work correctly in that context.
 The code generator that generates the initial file and the one which
 inserts into it must both run as part of a single invocation of protoc.
 Code generators are executed in the order in which they appear on the
 command line.
 If |insertion_point| is present, |name| must also be present.
 

optional string insertion_point = 2;

getInsertionPointBytes

ByteString getInsertionPointBytes()

 If non-empty, indicates that the named file should already exist, and the
 content here is to be inserted into that file at a defined insertion
 point.  This feature allows a code generator to extend the output
 produced by another code generator.  The original generator may provide
 insertion points by placing special annotations in the file that look
 like:
   @@protoc_insertion_point(NAME)
 The annotation can have arbitrary text before and after it on the line,
 which allows it to be placed in a comment.  NAME should be replaced with
 an identifier naming the point -- this is what other generators will use
 as the insertion_point.  Code inserted at this point will be placed
 immediately above the line containing the insertion point (thus multiple
 insertions to the same point will come out in the order they were added).
 The double-@ is intended to make it unlikely that the generated code
 could contain things that look like insertion points by accident.
 For example, the C++ code generator places the following line in the
 .pb.h files that it generates:
   // @@protoc_insertion_point(namespace_scope)
 This line appears within the scope of the file's package namespace, but
 outside of any particular class.  Another plugin can then specify the
 insertion_point "namespace_scope" to generate additional classes or
 other declarations that should be placed in this scope.
 Note that if the line containing the insertion point begins with
 whitespace, the same whitespace will be added to every line of the
 inserted text.  This is useful for languages like Python, where
 indentation matters.  In these languages, the insertion point comment
 should be indented the same amount as any inserted code will need to be
 in order to work correctly in that context.
 The code generator that generates the initial file and the one which
 inserts into it must both run as part of a single invocation of protoc.
 Code generators are executed in the order in which they appear on the
 command line.
 If |insertion_point| is present, |name| must also be present.
 

optional string insertion_point = 2;

hasContent

boolean hasContent()

 The file contents.
 

optional string content = 15;

getContent

String getContent()

 The file contents.
 

optional string content = 15;

getContentBytes

ByteString getContentBytes()

 The file contents.
 

optional string content = 15;