Tapir

Inputs which describe authentication credentials with metadata.

Usage:

binaryBody(RawBodyType.FileBody)[MyType]

, given that a codec between a file and MyType is available in the implicit scope.

Requires an implicit Codec.JsonCodec in scope. Such a codec can be created using Codec.json.

However, json codecs are usually derived from json-library-specific implicits. That's why integrations with various json libraries define jsonBody methods, which directly require the library-specific implicits.

Unless you have defined a custom json codec, the jsonBody methods should be used.

An empty output. Useful if one of the oneOf branches of a coproduct type is a case object that should be mapped to an empty body.

Extract a value from a server request. This input is only used by server interpreters, it is ignored by documentation interpreters and the provided value is discarded by client interpreters.

An output which contains a number of variant outputs. Each variant can contain different outputs and represent different content. To describe an output which represents same content, but with different content types, use oneOfBody.

All possible outputs must have a common supertype (T). Typically, the supertype is a sealed trait, and the variants are implementing case classes.

When encoding to a response, the first matching output is chosen, using the following rules:

1. the variant's appliesTo method, applied to the output value (as returned by the server logic) must return true.
2. when a fixed content type is specified by the output, it must match the request's Accept header (if present). This implements content negotiation.

When decoding from a response, the first output which decodes successfully is chosen.

The outputs might vary in status codes, headers (e.g. different content types), and body implementations. However, for bodies, only replayable ones can be used, and they need to have the same raw representation (e.g. all byte-array-base, or all file-based).

Note that exhaustiveness of the variants (that all subtypes of T are covered) is not checked.

A body input or output, which can be one of the given variants. All variants should represent T instances using different content types. Hence, the content type is used as a discriminator to choose the appropriate variant.

Should be used to describe an input or output which represents the same content, but using different content types. For an output which describes variants including possibly different outputs (representing different content), see oneOf.

The server behavior is as follows:

• when encoding to a response, the first variant matching the request's Accept header is chosen (if present). Otherwise, the first variant is used. This implements content negotiation.
• when decoding a request, the variant corresponding to the request's Content-Type header is chosen (if present). Otherwise, a decode failure is returned, which by default results in an 415 Unsupported Media Type response.

The client behavior is as follows:

• when encoding a request, the first variant is used.
• when decoding a response, the variant corresponding to the response's Content-Type header is chosen (if present). Otherwise, the first variant is used. For client interpreters to work correctly, all body variants must have the same raw type (e.g. all are string-based or all byte-array-based)

All possible bodies must have the same type T. Typically, the bodies will vary in the Codecs that are used for the body.

Streaming variant of oneOfBody.

See oneOfBody.

Allows explicitly specifying the content type range, for which each body will be used, instead of defaulting to the exact media type as specified by the body's codec. This is only used when choosing which body to decode.

Streaming variant of oneOfBody.

Allows explicitly specifying the content type range, for which each body will be used, instead of defaulting to the exact media type as specified by the body's codec. This is only used when choosing which body to decode.

Create a fallback variant to be used in oneOf output descriptions. Multiple such variants can be specified, with different body content types.

Create a one-of-variant which uses output if the class of the provided value (when interpreting as a server) matches the runtime class of T.

This will fail at compile-time if the type erasure of T is different from T, as a runtime check in this situation would give invalid results. In such cases, use oneOfVariantClassMatcher, oneOfVariantValueMatcher or oneOfVariantFromMatchType instead.

Should be used in oneOf output descriptions.

Create a one-of-variant which uses output if the class of the provided value (when interpreting as a server) matches the runtime class of T. Adds a fixed status-code output with the given value.

This will fail at compile-time if the type erasure of T is different from T, as a runtime check in this situation would give invalid results. In such cases, use oneOfVariantClassMatcher, oneOfVariantValueMatcher or oneOfVariantFromMatchType instead.

Should be used in oneOf output descriptions.

Create a one-of-variant which uses output if the class of the provided value (when interpreting as a server) matches the given runtimeClass. Note that this does not take into account type erasure.

Should be used in oneOf output descriptions.

Create a one-of-variant which uses output i the class of the provided value (when interpreting as a server) matches the given runtimeClass. Note that this does not take into account type erasure. Adds a fixed status-code output with the given value.

Should be used in oneOf output descriptions.

Create a one-of-variant which output if the provided value exactly matches one of the values provided in the second argument list.

Should be used in oneOf output descriptions.

Create a one-of-variant which uses output if the provided value exactly matches one of the values provided in the second argument list. Adds a fixed status-code output with the given value.

Should be used in oneOf output descriptions.

Create a one-of-variant which uses output if the provided value matches the target type, as checked by MatchType. Instances of MatchType are automatically derived and recursively check that classes of all fields match, to bypass issues caused by type erasure.

Should be used in oneOf output descriptions.

Create a one-of-variant which uses output if the provided value matches the target type, as checked by MatchType. Instances of MatchType are automatically derived and recursively check that classes of all fields match, to bypass issues caused by type erasure. Adds a fixed status-code output with the given value.

Should be used in oneOf output descriptions.

Create a one-of-variant which uses output if the provided value (when interpreting as a server matches the matcher predicate).

Should be used in oneOf output descriptions.

Create a one-of-variant which uses output if the provided value (when interpreting as a server matches the matcher predicate). Adds a fixed status-code output with the given value.

Should be used in oneOf output descriptions.

A query parameter in any format, read using the given codec.

An output which maps to the status code in the response.

An fixed status code output.

Creates a stream body with a binary schema.

Creates a stream body with the given schema.

Creates a stream body with a text schema.

A body in any format, read using the given codec, from a raw string read using charset.

A body in any format, read using the given codec, from a raw string read using UTF-8.

A body in the JSON format, read from a raw string using UTF-8.

A body in the JSON format, read from a raw string using charset.

Requires an implicit Codec.XmlCodec in scope. Such a codec can be created using Codec.xml.

A server endpoint, which exposes a single file from local storage found at systemPath, using the given path.

fileGetServerEndpoint("static" / "hello.html")("/home/app/static/data.html")

A server endpoint, which exposes files from local storage found at systemPath, using the given prefix. Typically, the prefix is a path, but it can also contain other inputs. For example:

filesGetServerEndpoint("static" / "files")("/home/app/static")

A request to /static/files/css/styles.css will try to read the /home/app/static/css/styles.css file.

A server endpoint, used to verify if sever supports range requests for file under particular path Additionally it verify file existence and returns its size

Create a pair of endpoints (head, get) for exposing files from local storage found at systemPath, using the given prefix. Typically, the prefix is a path, but it can also contain other inputs. For example:

filesServerEndpoints("static" / "files")("/home/app/static")

A request to /static/files/css/styles.css will try to read the /home/app/static/css/styles.css file.

A server endpoint, which exposes a single resource available from the given classLoader at resourcePath, using the given path.

resourceGetServerEndpoint("static" / "hello.html")(classOf[App].getClassLoader, "app/data.html")

A server endpoint, which exposes resources available from the given classLoader, using the given prefix. Typically, the prefix is a path, but it can also contain other inputs. For example:

resourcesGetServerEndpoint("static" / "files")(classOf[App].getClassLoader, "app")

A request to /static/files/css/styles.css will try to read the /app/css/styles.css resource.

An empty authentication input, to express the fact (for documentation) that authentication is optional, even in the presence of multiple optional authentication inputs (which by default are treated as alternatives).

An input which matches if the request URI ends with a trailing slash, otherwise the result is a decode failure on the path. Has no effect when used by documentation or client interpreters.