java.lang.Object
- com.neovisionaries.ws.client.WebSocket

public class WebSocket
extends Object

WebSocket.

Create WebSocketFactory

WebSocketFactory is a factory class that creates WebSocket instances. The first step is to create a WebSocketFactory instance.

 // Create a WebSocketFactory instance.
 WebSocketFactory factory = new WebSocketFactory();

By default, WebSocketFactory uses SocketFactory.getDefault() for non-secure WebSocket connections (ws:) and SSLSocketFactory.getDefault() for secure WebSocket connections (wss:). You can change this default behavior by using WebSocketFactory.setSocketFactory method, WebSocketFactory.setSSLSocketFactory method and WebSocketFactory.setSSLContext method. Note that you don't have to call a setSSL* method at all if you use the default SSL configuration. Also note that calling setSSLSocketFactory method has no meaning if you have called setSSLContext method. See the description of WebSocketFactory.createSocket(URI) method for details.

The following is an example to set a custom SSL context to a WebSocketFactory instance. (Again, you don't have to call a setSSL* method if you use the default SSL configuration.)

 // Create a custom SSL context.
 SSLContext context = NaiveSSLContext.getInstance("TLS");

 // Set the custom SSL context.
 factory.setSSLContext(context);

 // Disable manual hostname verification for NaiveSSLContext.
 //
 // Manual hostname verification has been enabled since the
 // version 2.1. Because the verification is executed manually
 // after Socket.connect(SocketAddress, int) succeeds, the
 // hostname verification is always executed even if you has
 // passed an SSLContext which naively accepts any server
 // certificate. However, this behavior is not desirable in
 // some cases and you may want to disable the hostname
 // verification. You can disable the hostname verification
 // by calling WebSocketFactory.setVerifyHostname(false).
 factory.setVerifyHostname(false);

NaiveSSLContext used in the above example is a factory class to create an SSLContext which naively accepts all certificates without verification. It's enough for testing purposes. When you see an error message "unable to find valid certificate path to requested target" while testing, try NaiveSSLContext.

HTTP Proxy

If a WebSocket endpoint needs to be accessed via an HTTP proxy, information about the proxy server has to be set to a WebSocketFactory instance before creating a WebSocket instance. Proxy settings are represented by ProxySettings class. A WebSocketFactory instance has an associated ProxySettings instance and it can be obtained by calling WebSocketFactory.getProxySettings() method.

 // Get the associated ProxySettings instance.
 ProxySettings settings = factory.getProxySettings();

ProxySettings class has methods to set information about a proxy server such as setHost method and setPort method. The following is an example to set a secure (https) proxy server.

 // Set a proxy server.
 settings.setServer("https://proxy.example.com");

If credentials are required for authentication at a proxy server, setId method and setPassword method, or setCredentials method can be used to set the credentials. Note that, however, the current implementation supports only Basic Authentication.

 // Set credentials for authentication at a proxy server.
 settings.setCredentials(id, password);

Create WebSocket

WebSocket class represents a WebSocket. Its instances are created by calling one of createSocket methods of a WebSocketFactory instance. Below is the simplest example to create a WebSocket instance.

 // Create a WebSocket. The scheme part can be one of the following:
 // 'ws', 'wss', 'http' and 'https' (case-insensitive). The user info
 // part, if any, is interpreted as expected. If a raw socket failed
 // to be created, an IOException is thrown.
 WebSocket ws = new WebSocketFactory()
     .createWebSocket("ws://localhost/endpoint");

There are two ways to set a timeout value for socket connection. The first way is to call setConnectionTimeout(int timeout) method of WebSocketFactory.

 // Create a WebSocket factory and set 5000 milliseconds as a timeout
 // value for socket connection.
 WebSocketFactory factory = new WebSocketFactory().setConnectionTimeout(5000);

 // Create a WebSocket. The timeout value set above is used.
 WebSocket ws = factory.createWebSocket("ws://localhost/endpoint");

The other way is to give a timeout value to a createSocket method.

 // Create a WebSocket factory. The timeout value remains 0.
 WebSocketFactory factory = new WebSocketFactory();

 // Create a WebSocket with a socket connection timeout value.
 WebSocket ws = factory.createWebSocket("ws://localhost/endpoint", 5000);

The timeout value is passed to connect(SocketAddress, int) method of Socket.

Register Listener

After creating a WebSocket instance, you should call addListener(WebSocketListener) method to register a WebSocketListener that receives WebSocket events. WebSocketAdapter is an empty implementation of WebSocketListener interface.

 // Register a listener to receive WebSocket events.
 ws.addListener(new WebSocketAdapter() {
     @Override
     public void onTextMessage(WebSocket websocket, String message) throws Exception {
         // Received a text message.
         ......
     }
 });

The table below is the list of callback methods defined in WebSocketListener interface.

WebSocketListener methods

Method Description

handleCallbackError Called when an onXxx() method threw a Throwable.

onBinaryFrame Called when a binary frame was received.

onBinaryMessage Called when a binary message was received.

onCloseFrame Called when a close frame was received.

onConnected Called after the opening handshake succeeded.

onConnectError Called when connectAsynchronously() failed.

onContinuationFrame Called when a continuation frame was received.

onDisconnected Called after a WebSocket connection was closed.

onError Called when an error occurred.

onFrame Called when a frame was received.

onFrameError Called when a frame failed to be read.

onFrameSent Called when a frame was sent.

onFrameUnsent Called when a frame was not sent.

onMessageDecompressionError Called when a message failed to be decompressed.

onMessageError Called when a message failed to be constructed.

onPingFrame Called when a ping frame was received.

onPongFrame Called when a pong frame was received.

onSendError Called when an error occurred on sending a frame.

onSendingFrame Called before a frame is sent.

onSendingHandshake Called before an opening handshake is sent.

onStateChanged Called when the state of WebSocket changed.

onTextFrame Called when a text frame was received.

onTextMessage Called when a text message was received.

onTextMessageError Called when a text message failed to be constructed.

onThreadCreated Called after a thread was created.

onThreadStarted Called at the beginning of a thread's run() method.

onThreadStopping Called at the end of a thread's run() method.

onUnexpectedError Called when an uncaught throwable was detected.

Configure WebSocket

Before starting a WebSocket opening handshake with the server, you can configure the WebSocket instance by using the following methods.

Methods for Configuration

METHOD DESCRIPTION

addProtocol Adds an element to Sec-WebSocket-Protocol

addExtension Adds an element to Sec-WebSocket-Extensions

addHeader Adds an arbitrary HTTP header.

setUserInfo Adds Authorization header for Basic Authentication.

getSocket Gets the underlying Socket instance to configure it.

setExtended Disables validity checks on RSV1/RSV2/RSV3 and opcode.

setFrameQueueSize Set the size of the frame queue for congestion control.

setMaxPayloadSize Set the maximum payload size.

setMissingCloseFrameAllowed Set whether to allow the server to close the connection without sending a close frame.

Connect To Server

By calling connect() method, connection to the server is established and a WebSocket opening handshake is performed synchronously. If an error occurred during the handshake, a WebSocketException would be thrown. Instead, when the handshake succeeds, the connect() implementation creates threads and starts them to read and write WebSocket frames asynchronously.

 try
 {
     // Connect to the server and perform an opening handshake.
     // This method blocks until the opening handshake is finished.
     ws.connect();
 }
 catch (OpeningHandshakeException e)
 {
     // A violation against the WebSocket protocol was detected
     // during the opening handshake.
 }
 catch (HostnameUnverifiedException e)
 {
     // The certificate of the peer does not match the expected hostname.
 }
 catch (WebSocketException e)
 {
     // Failed to establish a WebSocket connection.
 }

In some cases, connect() method throws OpeningHandshakeException which is a subclass of WebSocketException (since version 1.19). OpeningHandshakeException provides additional methods such as getStatusLine(), getHeaders() and getBody() to access the response from a server. The following snippet is an example to print information that the exception holds.

 catch (OpeningHandshakeException e)
 {
     // Status line.
     StatusLine sl = e.getStatusLine();
     System.out.println("=== Status Line ===");
     System.out.format("HTTP Version  = %s\n", sl.getHttpVersion());
     System.out.format("Status Code   = %d\n", sl.getStatusCode());
     System.out.format("Reason Phrase = %s\n", sl.getReasonPhrase());

     // HTTP headers.
     Map<String, List<String>> headers = e.getHeaders();
     System.out.println("=== HTTP Headers ===");
     for (Map.Entry<String, List<String>> entry : headers.entrySet())
     {
         // Header name.
         String name = entry.getKey();

         // Values of the header.
         List<String> values = entry.getValue();

         if (values == null || values.size() == 0)
         {
             // Print the name only.
             System.out.println(name);
             continue;
         }

         for (String value : values)
         {
             // Print the name and the value.
             System.out.format("%s: %s\n", name, value);
         }
     }
 }

Also, connect() method throws HostnameUnverifiedException which is a subclass of WebSocketException (since version 2.1) when the certificate of the peer does not match the expected hostname.

Connect To Server Asynchronously

The simplest way to call connect() method asynchronously is to use connectAsynchronously() method. The implementation of the method creates a thread and calls connect() method in the thread. When the connect() call failed, onConnectError() of WebSocketListener would be called. Note that onConnectError() is called only when connectAsynchronously() was used and the connect() call executed in the background thread failed. Neither direct synchronous connect() nor connect(ExecutorService) (described below) will trigger the callback method.

 // Connect to the server asynchronously.
 ws.connectAsynchronously();

Another way to call connect() method asynchronously is to use connect(ExecutorService) method. The method performs a WebSocket opening handshake asynchronously using the given ExecutorService.

 // Prepare an ExecutorService.
 ExecutorService es = Executors.newSingleThreadExecutor();

 // Connect to the server asynchronously.
 Future<WebSocket> future = ws.connect(es);

 try
 {
     // Wait for the opening handshake to complete.
     future.get();
 }
 catch (ExecutionException e)
 {
     if (e.getCause() instanceof WebSocketException)
     {
         ......
     }
 }

The implementation of connect(ExecutorService) method creates a Callable<WebSocket> instance by calling connectable() method and passes the instance to submit(Callable) method of the given ExecutorService. What the implementation of call() method of the Callable instance does is just to call the synchronous connect().

Send Frames

WebSocket frames can be sent by sendFrame(WebSocketFrame) method. Other sendXxx methods such as sendText(String) are aliases of sendFrame method. All of the sendXxx methods work asynchronously. However, under some conditions, sendXxx methods may block. See Congestion Control for details.

Below are some examples of sendXxx methods. Note that in normal cases, you don't have to call sendClose() method and sendPong() (or their variants) explicitly because they are called automatically when appropriate.

 // Send a text frame.
 ws.sendText("Hello.");

 // Send a binary frame.
 byte[] binary = ......;
 ws.sendBinary(binary);

 // Send a ping frame.
 ws.sendPing("Are you there?");

If you want to send fragmented frames, you have to know the details of the specification (5.4. Fragmentation). Below is an example to send a text message ("How are you?") which consists of 3 fragmented frames.

 // The first frame must be either a text frame or a binary frame.
 // And its FIN bit must be cleared.
 WebSocketFrame firstFrame = WebSocketFrame
     .createTextFrame("How ")
     .setFin(false);

 // Subsequent frames must be continuation frames. The FIN bit of
 // all continuation frames except the last one must be cleared.
 // Note that the FIN bit of frames returned from
 // WebSocketFrame.createContinuationFrame methods is cleared, so
 // the example below does not clear the FIN bit explicitly.
 WebSocketFrame secondFrame = WebSocketFrame
     .createContinuationFrame("are ");

 // The last frame must be a continuation frame with the FIN bit set.
 // Note that the FIN bit of frames returned from
 // WebSocketFrame.createContinuationFrame methods is cleared, so
 // the FIN bit of the last frame must be set explicitly.
 WebSocketFrame lastFrame = WebSocketFrame
     .createContinuationFrame("you?")
     .setFin(true);

 // Send a text message which consists of 3 frames.
 ws.sendFrame(firstFrame)
   .sendFrame(secondFrame)
   .sendFrame(lastFrame);

Alternatively, the same as above can be done like this.

 // Send a text message which consists of 3 frames.
 ws.sendText("How ", false)
   .sendContinuation("are ")
   .sendContinuation("you?", true);

Send Ping/Pong Frames Periodically

You can send ping frames periodically by calling setPingInterval method with an interval in milliseconds between ping frames. This method can be called both before and after connect() method. Passing zero stops the periodical sending.

 // Send a ping per 60 seconds.
 ws.setPingInterval(60 * 1000);

 // Stop the periodical sending.
 ws.setPingInterval(0);

Likewise, you can send pong frames periodically by calling setPongInterval method. "A Pong frame MAY be sent unsolicited." (RFC 6455, 5.5.3. Pong)

You can customize payload of ping/pong frames that are sent automatically by using setPingPayloadGenerator(PayloadGenerator) and setPongPayloadGenerator(PayloadGenerator) methods. Both methods take an instance of PayloadGenerator interface. The following is an example to use the string representation of the current date as payload of ping frames.

 ws.setPingPayloadGenerator(new PayloadGenerator () {
     @Override
     public byte[] generate() {
         // The string representation of the current date.
         return new Date().toString().getBytes();
     }
 });

Note that the maximum payload length of control frames (e.g. ping frames) is 125. Therefore, the length of a byte array returned from generate() method must not exceed 125.

Auto Flush

By default, a frame is automatically flushed to the server immediately after sendFrame method is executed. This automatic flush can be disabled by calling setAutoFlush(false).

 // Disable auto-flush.
 ws.setAutoFlush(false);

To flush frames manually, call flush() method. Note that this method works asynchronously.

 // Flush frames to the server manually.
 ws.flush();

Congestion Control

sendXxx methods queue a WebSocketFrame instance to the internal queue. By default, no upper limit is imposed on the queue size, so sendXxx methods do not block. However, this behavior may cause a problem if your WebSocket client application sends too many WebSocket frames in a short time for the WebSocket server to process. In such a case, you may want sendXxx methods to block when many frames are queued.

You can set an upper limit on the internal queue by calling setFrameQueueSize(int) method. As a result, if the number of frames in the queue has reached the upper limit when a sendXxx method is called, the method blocks until the queue gets spaces. The code snippet below is an example to set 5 as the upper limit of the internal frame queue.

 // Set 5 as the frame queue size.
 ws.setFrameQueueSize(5);

Note that under some conditions, even if the queue is full, sendXxx methods do not block. For example, in the case where the thread to send frames (WritingThread) is going to stop or has already stopped. In addition, method calls to send a control frame (e.g. sendClose() and sendPing()) do not block.

Maximum Payload Size

You can set an upper limit on the payload size of WebSocket frames by calling setMaxPayloadSize(int) method with a positive value. Text, binary and continuation frames whose payload size is bigger than the maximum payload size you have set will be split into multiple frames.

 // Set 1024 as the maximum payload size.
 ws.setMaxPayloadSize(1024);

Control frames (close, ping and pong frames) are never split as per the specification.

If permessage-deflate extension is enabled and if the payload size of a WebSocket frame after compression does not exceed the maximum payload size, the WebSocket frame is not split even if the payload size before compression execeeds the maximum payload size.

Compression

The permessage-deflate extension (RFC 7692) has been supported since the version 1.17. To enable the extension, call addExtension method with "permessage-deflate".

 // Enable "permessage-deflate" extension (RFC 7692).
 ws.addExtension(WebSocketExtension.PERMESSAGE_DEFLATE);

Missing Close Frame

Some server implementations close a WebSocket connection without sending a close frame to a client in some cases. Strictly speaking, this is a violation against the specification (RFC 6455). However, this library has allowed the behavior by default since the version 1.29. Even if the end of the input stream of a WebSocket connection were reached without a close frame being received, it would trigger neither onError() method nor onFrameError() method of WebSocketListener. If you want to make a WebSocket instance report an error in the case, pass false to setMissingCloseFrameAllowed(boolean) method.

 // Make this library report an error when the end of the input stream
 // of the WebSocket connection is reached before a close frame is read.
 ws.setMissingCloseFrameAllowed(false);

Disconnect WebSocket

Before a WebSocket is closed, a closing handshake is performed. A closing handshake is started (1) when the server sends a close frame to the client or (2) when the client sends a close frame to the server. You can start a closing handshake by calling disconnect() method (or by sending a close frame manually).

 // Close the WebSocket connection.
 ws.disconnect();

disconnect() method has some variants. If you want to change the close code and the reason phrase of the close frame that this client will send to the server, use a variant method such as disconnect(int, String). disconnect() method itself is an alias of disconnect(WebSocketCloseCode.NORMAL, null).

Reconnection

connect() method can be called at most only once regardless of whether the method succeeded or failed. If you want to re-connect to the WebSocket endpoint, you have to create a new WebSocket instance again by calling one of createSocket methods of a WebSocketFactory. You may find recreate() method useful if you want to create a new WebSocket instance that has the same settings as the original instance. Note that, however, settings you made on the raw socket of the original WebSocket instance are not copied.

 // Create a new WebSocket instance and connect to the same endpoint.
 ws = ws.recreate().connect();

There is a variant of recreate() method that takes a timeout value for socket connection. If you want to use a timeout value that is different from the one used when the existing WebSocket instance was created, use recreate(int timeout) method.

Note that you should not trigger reconnection in onError() method because onError() may be called multiple times due to one error. Instead, onDisconnected() is the right place to trigger reconnection.

Also note that the reason I use an expression of "to trigger reconnection" instead of "to call recreate().connect()" is that I myself won't do it synchronously in WebSocketListener callback methods but will just schedule reconnection or will just go to the top of a kind of application loop that repeats to establish a WebSocket connection until it succeeds.

Error Handling

WebSocketListener has some onXxxError() methods such as onFrameError() and onSendError(). Among such methods, onError() is a special one. It is always called before any other onXxxError() is called. For example, in the implementation of run() method of ReadingThread, Throwable is caught and onError() and onUnexpectedError() are called in this order. The following is the implementation.

 @Override
 public void run()
 {
     try
     {
         main();
     }
     catch (Throwable t)
     {
         // An uncaught throwable was detected in the reading thread.
         WebSocketException cause = new WebSocketException(
             WebSocketError.UNEXPECTED_ERROR_IN_READING_THREAD,
             "An uncaught throwable was detected in the reading thread", t);

         // Notify the listeners.
         ListenerManager manager = mWebSocket.getListenerManager();
         manager.callOnError(cause);
         manager.callOnUnexpectedError(cause);
     }
 }

So, you can handle all error cases in onError() method. However, note that onError() may be called multiple times for one error cause, so don't try to trigger reconnection in onError(). Instead, onDiconnected() is the right place to trigger reconnection.

All onXxxError() methods receive a WebSocketException instance as the second argument (the first argument is a WebSocket instance). The exception class provides getError() method which returns a WebSocketError enum entry. Entries in WebSocketError enum are possible causes of errors that may occur in the implementation of this library. The error causes are so granular that they can make it easy for you to find the root cause when an error occurs.

Throwables thrown by implementations of onXXX() callback methods are passed to handleCallbackError() of WebSocketListener.

 @Override
 public void handleCallbackError(WebSocket websocket, Throwable cause) throws Exception {
     // Throwables thrown by onXxx() callback methods come here.
 }

Thread Callbacks

Some threads are created internally in the implementation of WebSocket. Known threads are as follows.

Internal Threads

THREAD TYPE DESCRIPTION

READING_THREAD A thread which reads WebSocket frames from the server.

WRITING_THREAD A thread which sends WebSocket frames to the server.

CONNECT_THREAD A thread which calls connect() asynchronously.

FINISH_THREAD A thread which does finalization of a WebSocket instance.

The following callback methods of WebSocketListener are called according to the life cycle of the threads.

Thread Callbacks

METHOD DESCRIPTION

onThreadCreated() Called after a thread was created.

onThreadStarted() Called at the beginning of the thread's run() method.

onThreadStopping() Called at the end of the thread's run() method.

For example, if you want to change the name of the reading thread, implement onThreadCreated() method like below.

 @Override
 public void onThreadCreated(WebSocket websocket, ThreadType type, Thread thread)
 {
     if (type == ThreadType.READING_THREAD)
     {
         thread.setName("READING_THREAD");
     }
 }

Author:: Takahiko Kawasaki
See Also:: RFC 6455 (The WebSocket Protocol), RFC 7692 (Compression Extensions for WebSocket), [GitHub] nv-websocket-client

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`WebSocket`	`addExtension(com.neovisionaries.ws.client.WebSocketExtension extension)`	Add a value for `Sec-WebSocket-Extension`.
`WebSocket`	`addExtension(String extension)`	Add a value for `Sec-WebSocket-Extension`.
`WebSocket`	`addHeader(String name, String value)`	Add a pair of extra HTTP header.
`WebSocket`	`addListener(com.neovisionaries.ws.client.WebSocketListener listener)`	Add a listener to receive events on this WebSocket.
`WebSocket`	`addListeners(List<com.neovisionaries.ws.client.WebSocketListener> listeners)`	Add listeners.
`WebSocket`	`addProtocol(String protocol)`	Add a value for `Sec-WebSocket-Protocol`.
`WebSocket`	`clearExtensions()`	Remove all extensions from `Sec-WebSocket-Extension`.
`WebSocket`	`clearHeaders()`	Clear all extra HTTP headers.
`WebSocket`	`clearListeners()`	Remove all the listeners from this WebSocket.
`WebSocket`	`clearProtocols()`	Remove all protocols from `Sec-WebSocket-Protocol`.
`WebSocket`	`clearUserInfo()`	Clear the credentials to connect to the WebSocket endpoint.
`WebSocket`	`connect()`	Connect to the server, send an opening handshake to the server, receive the response and then start threads to communicate with the server.
`Future<WebSocket>`	`connect(ExecutorService executorService)`	Execute `connect()` asynchronously using the given `ExecutorService`.
`Callable<WebSocket>`	`connectable()`	Get a new `Callable<WebSocket>` instance whose `call()` method calls `connect()` method of this `WebSocket` instance.
`WebSocket`	`connectAsynchronously()`	Execute `connect()` asynchronously by creating a new thread and calling `connect()` in the thread.
`WebSocket`	`disconnect()`	Disconnect the WebSocket.
`WebSocket`	`disconnect(int closeCode)`	Disconnect the WebSocket.
`WebSocket`	`disconnect(int closeCode, String reason)`	Disconnect the WebSocket.
`WebSocket`	`disconnect(int closeCode, String reason, long closeDelay)`	Disconnect the WebSocket.
`WebSocket`	`disconnect(String reason)`	Disconnect the WebSocket.
`protected void`	`finalize()`
`WebSocket`	`flush()`	Flush frames to the server.
`List<com.neovisionaries.ws.client.WebSocketExtension>`	`getAgreedExtensions()`	Get the agreed extensions.
`String`	`getAgreedProtocol()`	Get the agreed protocol.
`int`	`getFrameQueueSize()`	Get the size of the frame queue.
`int`	`getMaxPayloadSize()`	Get the maximum payload size.
`long`	`getPingInterval()`	Get the interval of periodical ping frames.
`com.neovisionaries.ws.client.PayloadGenerator`	`getPingPayloadGenerator()`	Get the generator of payload of ping frames that are sent automatically.
`long`	`getPongInterval()`	Get the interval of periodical pong frames.
`com.neovisionaries.ws.client.PayloadGenerator`	`getPongPayloadGenerator()`	Get the generator of payload of pong frames that are sent automatically.
`Socket`	`getSocket()`	Get the raw socket which this WebSocket uses internally.
`com.neovisionaries.ws.client.WebSocketState`	`getState()`	Get the current state of this WebSocket.
`URI`	`getURI()`	Get the URI of the WebSocket endpoint.
`boolean`	`isAutoFlush()`	Check if flush is performed automatically after `sendFrame(WebSocketFrame)` is done.
`boolean`	`isExtended()`	Check if extended use of WebSocket frames are allowed.
`boolean`	`isMissingCloseFrameAllowed()`	Check if this instance allows the server to close the WebSocket connection without sending a close frame to this client.
`boolean`	`isOpen()`	Check if the current state of this WebSocket is `OPEN`.
`WebSocket`	`recreate()`	Create a new `WebSocket` instance that has the same settings as this instance.
`WebSocket`	`recreate(int timeout)`	Create a new `WebSocket` instance that has the same settings as this instance.
`WebSocket`	`removeExtension(com.neovisionaries.ws.client.WebSocketExtension extension)`	Remove an extension from `Sec-WebSocket-Extension`.
`WebSocket`	`removeExtensions(String name)`	Remove extensions from `Sec-WebSocket-Extension` by an extension name.
`WebSocket`	`removeHeaders(String name)`	Remove pairs of extra HTTP headers.
`WebSocket`	`removeListener(com.neovisionaries.ws.client.WebSocketListener listener)`	Remove a listener from this WebSocket.
`WebSocket`	`removeListeners(List<com.neovisionaries.ws.client.WebSocketListener> listeners)`	Remove listeners.
`WebSocket`	`removeProtocol(String protocol)`	Remove a protocol from `Sec-WebSocket-Protocol`.
`WebSocket`	`sendBinary(byte[] message)`	Send a binary message to the server.
`WebSocket`	`sendBinary(byte[] payload, boolean fin)`	Send a binary frame to the server.
`WebSocket`	`sendClose()`	Send a close frame to the server.
`WebSocket`	`sendClose(int closeCode)`	Send a close frame to the server.
`WebSocket`	`sendClose(int closeCode, String reason)`	Send a close frame to the server.
`WebSocket`	`sendContinuation()`	Send a continuation frame to the server.
`WebSocket`	`sendContinuation(boolean fin)`	Send a continuation frame to the server.
`WebSocket`	`sendContinuation(byte[] payload)`	Send a continuation frame to the server.
`WebSocket`	`sendContinuation(byte[] payload, boolean fin)`	Send a continuation frame to the server.
`WebSocket`	`sendContinuation(String payload)`	Send a continuation frame to the server.
`WebSocket`	`sendContinuation(String payload, boolean fin)`	Send a continuation frame to the server.
`WebSocket`	`sendFrame(com.neovisionaries.ws.client.WebSocketFrame frame)`	Send a WebSocket frame to the server.
`WebSocket`	`sendPing()`	Send a ping frame to the server.
`WebSocket`	`sendPing(byte[] payload)`	Send a ping frame to the server.
`WebSocket`	`sendPing(String payload)`	Send a ping frame to the server.
`WebSocket`	`sendPong()`	Send a pong frame to the server.
`WebSocket`	`sendPong(byte[] payload)`	Send a pong frame to the server.
`WebSocket`	`sendPong(String payload)`	Send a pong frame to the server.
`WebSocket`	`sendText(String message)`	Send a text message to the server.
`WebSocket`	`sendText(String payload, boolean fin)`	Send a text frame to the server.
`WebSocket`	`setAutoFlush(boolean auto)`	Enable or disable auto-flush of sent frames.
`WebSocket`	`setExtended(boolean extended)`	Allow or disallow extended use of WebSocket frames.
`WebSocket`	`setFrameQueueSize(int size)`	Set the size of the frame queue.
`WebSocket`	`setMaxPayloadSize(int size)`	Set the maximum payload size.
`WebSocket`	`setMissingCloseFrameAllowed(boolean allowed)`	Set whether to allow the server to close the WebSocket connection without sending a close frame to this client.
`void`	`setPayloadMask(Masker payloadMasker)`	Setup payload masker.
`WebSocket`	`setPingInterval(long interval)`	Set the interval of periodical ping frames.
`WebSocket`	`setPingPayloadGenerator(com.neovisionaries.ws.client.PayloadGenerator generator)`	Set the generator of payload of ping frames that are sent automatically.
`WebSocket`	`setPongInterval(long interval)`	Set the interval of periodical pong frames.
`WebSocket`	`setPongPayloadGenerator(com.neovisionaries.ws.client.PayloadGenerator generator)`	Set the generator of payload of pong frames that are sent automatically.
`WebSocket`	`setUserInfo(String userInfo)`	Set the credentials to connect to the WebSocket endpoint.
`WebSocket`	`setUserInfo(String id, String password)`	Set the credentials to connect to the WebSocket endpoint.

Methods inherited from class java.lang.Object
clone, equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Method Detail
  - recreate
```
public WebSocket recreate()
                   throws IOException
```
    Create a new WebSocket instance that has the same settings as this instance. Note that, however, settings you made on the raw socket are not copied.
    The WebSocketFactory instance that you used to create this WebSocket instance is used again.
    
    This method calls recreate(int) with the timeout value that was used when this instance was created. If you want to create a socket connection with a different timeout value, use recreate(int) method instead.
    
    Returns:
    
    A new WebSocket instance.
    
    Throws:
    
    IOException - WebSocketFactory.createSocket(URI) threw an exception.
    
    Since:
    
    1.6
  - recreate
```
public WebSocket recreate(int timeout)
                   throws IOException
```
    Create a new WebSocket instance that has the same settings as this instance. Note that, however, settings you made on the raw socket are not copied.
    The WebSocketFactory instance that you used to create this WebSocket instance is used again.
    
    Parameters:
    
    timeout - The timeout value in milliseconds for socket timeout. A timeout of zero is interpreted as an infinite timeout.
    
    Returns:
    
    A new WebSocket instance.
    
    Throws:
    
    IllegalArgumentException - The given timeout value is negative.
    
    IOException - WebSocketFactory.createSocket(URI) threw an exception.
    
    Since:
    
    1.10
  - finalize
```
protected void finalize()
                 throws Throwable
```
    Overrides:
    
    finalize in class Object
    
    Throws:
    
    Throwable
  - getState
```
public com.neovisionaries.ws.client.WebSocketState getState()
```
    Get the current state of this WebSocket.
    The initial state is CREATED. When connect() is called, the state is changed to CONNECTING, and then to OPEN after a successful opening handshake. The state is changed to CLOSING when a closing handshake is started, and then to CLOSED when the closing handshake finished.
    
    See the description of WebSocketState for details.
    
    Returns:
    
    The current state.
    
    See Also:
    
    WebSocketState
  - isOpen
```
public boolean isOpen()
```
    Check if the current state of this WebSocket is OPEN.
    
    Returns:
    
    true if the current state is OPEN.
    
    Since:
    
    1.1
  - setPayloadMask
```
public void setPayloadMask(Masker payloadMasker)
```
    Setup payload masker. If not set then @see DefaultMasker is configured to mask payload bytes.
    
    Parameters:
    
    payloadMasker -
  - addProtocol
```
public WebSocket addProtocol(String protocol)
```
    Add a value for Sec-WebSocket-Protocol.
    
    Parameters:
    
    protocol - A protocol name.
    
    Returns:
    
    this object.
    
    Throws:
    
    IllegalArgumentException - The protocol name is invalid. A protocol name must be a non-empty string with characters in the range U+0021 to U+007E not including separator characters.
  - removeProtocol
```
public WebSocket removeProtocol(String protocol)
```
    Remove a protocol from Sec-WebSocket-Protocol.
    
    Parameters:
    
    protocol - A protocol name. null is silently ignored.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - clearProtocols
```
public WebSocket clearProtocols()
```
    Remove all protocols from Sec-WebSocket-Protocol.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - addExtension
```
public WebSocket addExtension(com.neovisionaries.ws.client.WebSocketExtension extension)
```
    Add a value for Sec-WebSocket-Extension.
    
    Parameters:
    
    extension - An extension. null is silently ignored.
    
    Returns:
    
    this object.
  - addExtension
```
public WebSocket addExtension(String extension)
```
    Add a value for Sec-WebSocket-Extension. The input string should comply with the format described in 9.1. Negotiating Extensions in RFC 6455.
    
    Parameters:
    
    extension - A string that represents a WebSocket extension. If it does not comply with RFC 6455, no value is added to Sec-WebSocket-Extension.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - removeExtension
```
public WebSocket removeExtension(com.neovisionaries.ws.client.WebSocketExtension extension)
```
    Remove an extension from Sec-WebSocket-Extension.
    
    Parameters:
    
    extension - An extension to remove. null is silently ignored.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - removeExtensions
```
public WebSocket removeExtensions(String name)
```
    Remove extensions from Sec-WebSocket-Extension by an extension name.
    
    Parameters:
    
    name - An extension name. null is silently ignored.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - clearExtensions
```
public WebSocket clearExtensions()
```
    Remove all extensions from Sec-WebSocket-Extension.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - addHeader
```
public WebSocket addHeader(String name,
                           String value)
```
    Add a pair of extra HTTP header.
    
    Parameters:
    
    name - An HTTP header name. When null or an empty string is given, no header is added.
    
    value - The value of the HTTP header.
    
    Returns:
    
    this object.
  - removeHeaders
```
public WebSocket removeHeaders(String name)
```
    Remove pairs of extra HTTP headers.
    
    Parameters:
    
    name - An HTTP header name. null is silently ignored.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - clearHeaders
```
public WebSocket clearHeaders()
```
    Clear all extra HTTP headers.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - setUserInfo
```
public WebSocket setUserInfo(String userInfo)
```
    Set the credentials to connect to the WebSocket endpoint.
    
    Parameters:
    
    userInfo - The credentials for Basic Authentication. The format should be id:password.
    
    Returns:
    
    this object.
  - setUserInfo
```
public WebSocket setUserInfo(String id,
                             String password)
```
    Set the credentials to connect to the WebSocket endpoint.
    
    Parameters:
    
    id - The ID.
    
    password - The password.
    
    Returns:
    
    this object.
  - clearUserInfo
```
public WebSocket clearUserInfo()
```
    Clear the credentials to connect to the WebSocket endpoint.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - isExtended
```
public boolean isExtended()
```
    Check if extended use of WebSocket frames are allowed.
    When extended use is allowed, values of RSV1/RSV2/RSV3 bits and opcode of frames are not checked. On the other hand, if not allowed (default), non-zero values for RSV1/RSV2/RSV3 bits and unknown opcodes cause an error. In such a case, onFrameError method of listeners are called and the WebSocket is eventually closed.
    
    Returns:
    
    true if extended use of WebSocket frames are allowed.
  - setExtended
```
public WebSocket setExtended(boolean extended)
```
    Allow or disallow extended use of WebSocket frames.
    
    Parameters:
    
    extended - true to allow extended use of WebSocket frames.
    
    Returns:
    
    this object.
  - isAutoFlush
```
public boolean isAutoFlush()
```
    Check if flush is performed automatically after sendFrame(WebSocketFrame) is done. The default value is true.
    
    Returns:
    
    true if flush is performed automatically.
    
    Since:
    
    1.5
  - setAutoFlush
```
public WebSocket setAutoFlush(boolean auto)
```
    Enable or disable auto-flush of sent frames.
    
    Parameters:
    
    auto - true to enable auto-flush. false to disable it.
    
    Returns:
    
    this object.
    
    Since:
    
    1.5
  - isMissingCloseFrameAllowed
```
public boolean isMissingCloseFrameAllowed()
```
    Check if this instance allows the server to close the WebSocket connection without sending a close frame to this client. The default value is true.
    
    Returns:
    
    true if the configuration allows for the server to close the WebSocket connection without sending a close frame to this client. false if the configuration requires that an error be reported via onError() method and onFrameError() method of WebSocketListener.
    
    Since:
    
    1.29
  - setMissingCloseFrameAllowed
```
public WebSocket setMissingCloseFrameAllowed(boolean allowed)
```
    Set whether to allow the server to close the WebSocket connection without sending a close frame to this client.
    
    Parameters:
    
    allowed - true to allow the server to close the WebSocket connection without sending a close frame to this client. false to make this instance report an error when the end of the input stream of the WebSocket connection is reached before a close frame is read.
    
    Returns:
    
    this object.
    
    Since:
    
    1.29
  - flush
```
public WebSocket flush()
```
    Flush frames to the server. Flush is performed asynchronously.
    
    Returns:
    
    this object.
    
    Since:
    
    1.5
  - getFrameQueueSize
```
public int getFrameQueueSize()
```
    Get the size of the frame queue. The default value is 0 and it means there is no limit on the queue size.
    
    Returns:
    
    The size of the frame queue.
    
    Since:
    
    1.15
  - setFrameQueueSize
```
public WebSocket setFrameQueueSize(int size)
                            throws IllegalArgumentException
```
    Set the size of the frame queue. The default value is 0 and it means there is no limit on the queue size.
    sendXxx methods queue a WebSocketFrame instance to the internal queue. If the number of frames in the queue has reached the upper limit (which has been set by this method) when a sendXxx method is called, the method blocks until the queue gets spaces.
    
    Under some conditions, even if the queue is full, sendXxx methods do not block. For example, in the case where the thread to send frames (WritingThread) is going to stop or has already stopped. In addition, method calls to send a control frame (e.g. sendClose() and sendPing()) do not block.
    
    Parameters:
    
    size - The queue size. 0 means no limit. Negative numbers are not allowed.
    
    Returns:
    
    this object.
    
    Throws:
    
    IllegalArgumentException - size is negative.
    
    Since:
    
    1.15
  - getMaxPayloadSize
```
public int getMaxPayloadSize()
```
    Get the maximum payload size. The default value is 0 which means that the maximum payload size is not set and as a result frames are not split.
    
    Returns:
    
    The maximum payload size. 0 means that the maximum payload size is not set.
    
    Since:
    
    1.27
  - setMaxPayloadSize
```
public WebSocket setMaxPayloadSize(int size)
                            throws IllegalArgumentException
```
    Set the maximum payload size.
    Text, binary and continuation frames whose payload size is bigger than the maximum payload size will be split into multiple frames. Note that control frames (close, ping and pong frames) are not split as per the specification even if their payload size exceeds the maximum payload size.
    
    Parameters:
    
    size - The maximum payload size. 0 to unset the maximum payload size.
    
    Returns:
    
    this object.
    
    Throws:
    
    IllegalArgumentException - size is negative.
    
    Since:
    
    1.27
  - getPingInterval
```
public long getPingInterval()
```
    Get the interval of periodical ping frames.
    
    Returns:
    
    The interval in milliseconds.
    
    Since:
    
    1.2
  - setPingInterval
```
public WebSocket setPingInterval(long interval)
```
    Set the interval of periodical ping frames.
    Setting a positive number starts sending ping frames periodically. Setting zero stops the periodical sending. This method can be called both before and after connect() method.
    
    Parameters:
    
    interval - The interval in milliseconds. A negative value is regarded as zero.
    
    Returns:
    
    this object.
    
    Since:
    
    1.2
  - getPongInterval
```
public long getPongInterval()
```
    Get the interval of periodical pong frames.
    
    Returns:
    
    The interval in milliseconds.
    
    Since:
    
    1.2
  - setPongInterval
```
public WebSocket setPongInterval(long interval)
```
    Set the interval of periodical pong frames.
    Setting a positive number starts sending pong frames periodically. Setting zero stops the periodical sending. This method can be called both before and after connect() method.
    
    An excerpt from RFC 6455, 5.5.3. Pong
    
    A Pong frame MAY be sent unsolicited. This serves as a unidirectional heartbeat. A response to an unsolicited Pong frame is not expected.
    
    Parameters:
    
    interval - The interval in milliseconds. A negative value is regarded as zero.
    
    Returns:
    
    this object.
    
    Since:
    
    1.2
  - getPingPayloadGenerator
```
public com.neovisionaries.ws.client.PayloadGenerator getPingPayloadGenerator()
```
    Get the generator of payload of ping frames that are sent automatically.
    
    Returns:
    
    The generator of payload ping frames that are sent automatically.
    
    Since:
    
    1.20
  - setPingPayloadGenerator
```
public WebSocket setPingPayloadGenerator(com.neovisionaries.ws.client.PayloadGenerator generator)
```
    Set the generator of payload of ping frames that are sent automatically.
    
    Parameters:
    
    generator - The generator of payload ping frames that are sent automatically.
    
    Since:
    
    1.20
  - getPongPayloadGenerator
```
public com.neovisionaries.ws.client.PayloadGenerator getPongPayloadGenerator()
```
    Get the generator of payload of pong frames that are sent automatically.
    
    Returns:
    
    The generator of payload pong frames that are sent automatically.
    
    Since:
    
    1.20
  - setPongPayloadGenerator
```
public WebSocket setPongPayloadGenerator(com.neovisionaries.ws.client.PayloadGenerator generator)
```
    Set the generator of payload of pong frames that are sent automatically.
    
    Parameters:
    
    generator - The generator of payload ppng frames that are sent automatically.
    
    Since:
    
    1.20
  - addListener
```
public WebSocket addListener(com.neovisionaries.ws.client.WebSocketListener listener)
```
    Add a listener to receive events on this WebSocket.
    
    Parameters:
    
    listener - A listener to add.
    
    Returns:
    
    this object.
  - addListeners
```
public WebSocket addListeners(List<com.neovisionaries.ws.client.WebSocketListener> listeners)
```
    Add listeners.
    
    Parameters:
    
    listeners - Listeners to add. null is silently ignored. null elements in the list are ignored, too.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - removeListener
```
public WebSocket removeListener(com.neovisionaries.ws.client.WebSocketListener listener)
```
    Remove a listener from this WebSocket.
    
    Parameters:
    
    listener - A listener to remove. null won't cause an error.
    
    Returns:
    
    this object.
    
    Since:
    
    1.13
  - removeListeners
```
public WebSocket removeListeners(List<com.neovisionaries.ws.client.WebSocketListener> listeners)
```
    Remove listeners.
    
    Parameters:
    
    listeners - Listeners to remove. null is silently ignored. null elements in the list are ignored, too.
    
    Returns:
    
    this object.
    
    Since:
    
    1.14
  - clearListeners
```
public WebSocket clearListeners()
```
    Remove all the listeners from this WebSocket.
    
    Returns:
    
    this object.
    
    Since:
    
    1.13
  - getSocket
```
public Socket getSocket()
```
    Get the raw socket which this WebSocket uses internally.
    
    Returns:
    
    The underlying Socket instance.
  - getURI
```
public URI getURI()
```
    Get the URI of the WebSocket endpoint. The scheme part is either "ws" or "wss". The authority part is always empty.
    
    Returns:
    
    The URI of the WebSocket endpoint.
    
    Since:
    
    1.1
  - connect
```
public WebSocket connect()
                  throws com.neovisionaries.ws.client.WebSocketException
```
    Connect to the server, send an opening handshake to the server, receive the response and then start threads to communicate with the server.
    As necessary, addProtocol(String), addExtension(WebSocketExtension) addHeader(String, String) should be called before you call this method. It is because the parameters set by these methods are used in the opening handshake.
    
    Also, as necessary, getSocket() should be used to set up socket parameters before you call this method. For example, you can set the socket timeout like the following.
    
    WebSocket websocket = ......; websocket.getSocket().setSoTimeout(5000);
    
    If the WebSocket endpoint requires Basic Authentication, you can set credentials by setUserInfo(userInfo) or setUserInfo(id, password) before you call this method. Note that if the URI passed to WebSocketFactory.createSocket method contains the user-info part, you don't have to call setUserInfo method.
    
    Note that this method can be called at most only once regardless of whether this method succeeded or failed. If you want to re-connect to the WebSocket endpoint, you have to create a new WebSocket instance again by calling one of createSocket methods of a WebSocketFactory. You may find recreate() method useful if you want to create a new WebSocket instance that has the same settings as this instance. (But settings you made on the raw socket are not copied.)
    Returns:
    
    this object.
    
    Throws:
    
    com.neovisionaries.ws.client.WebSocketException -
    
    The current state of the WebSocket is not CREATED
    Connecting the server failed.
    The opening handshake failed.
  - connect
```
public Future<WebSocket> connect(ExecutorService executorService)
```
    Execute connect() asynchronously using the given ExecutorService. This method is just an alias of the following.
    executorService.submit(connectable())
    
    Parameters:
    
    executorService - An ExecutorService to execute a task created by connectable().
    
    Returns:
    
    The value returned from ExecutorService.submit(Callable).
    
    Throws:
    
    NullPointerException - If the given ExecutorService is null.
    
    RejectedExecutionException - If the given ExecutorService rejected the task created by connectable().
    
    Since:
    
    1.7
    
    See Also:
    
    connectAsynchronously()
  - connectable
```
public Callable<WebSocket> connectable()
```
    Get a new Callable<WebSocket> instance whose call() method calls connect() method of this WebSocket instance.
    
    Returns:
    
    A new Callable<WebSocket> instance for asynchronous connect().
    
    Since:
    
    1.7
    
    See Also:
    
    connect(ExecutorService)
  - connectAsynchronously
```
public WebSocket connectAsynchronously()
```
    Execute connect() asynchronously by creating a new thread and calling connect() in the thread. If connect() failed, onConnectError() method of WebSocketListener is called.
    
    Returns:
    
    this object.
    
    Since:
    
    1.8
  - disconnect
```
public WebSocket disconnect()
```
    Disconnect the WebSocket.
    This method is an alias of disconnect(WebSocketCloseCode.NORMAL, null).
    
    Returns:
    
    this object.
  - disconnect
```
public WebSocket disconnect(int closeCode)
```
    Disconnect the WebSocket.
    This method is an alias of disconnect(closeCode, null).
    
    Parameters:
    
    closeCode - The close code embedded in a close frame which this WebSocket client will send to the server.
    
    Returns:
    
    this object.
    
    Since:
    
    1.5
  - disconnect
```
public WebSocket disconnect(String reason)
```
    Disconnect the WebSocket.
    This method is an alias of disconnect(WebSocketCloseCode.NORMAL, reason).
    
    Parameters:
    
    reason - The reason embedded in a close frame which this WebSocket client will send to the server. Note that the length of the bytes which represents the given reason must not exceed 125. In other words, (reason.getBytes("UTF-8").length <= 125) must be true.
    
    Returns:
    
    this object.
    
    Since:
    
    1.5
  - disconnect
```
public WebSocket disconnect(int closeCode,
                            String reason)
```
    Disconnect the WebSocket.
    This method is an alias of disconnect(closeCode, reason, 10000L).
    
    Parameters:
    
    closeCode - The close code embedded in a close frame which this WebSocket client will send to the server.
    
    reason - The reason embedded in a close frame which this WebSocket client will send to the server. Note that the length of the bytes which represents the given reason must not exceed 125. In other words, (reason.getBytes("UTF-8").length <= 125) must be true.
    
    Returns:
    
    this object.
    
    Since:
    
    1.5
    
    See Also:
    
    WebSocketCloseCode, RFC 6455, 5.5.1. Close
  - disconnect
```
public WebSocket disconnect(int closeCode,
                            String reason,
                            long closeDelay)
```
    Disconnect the WebSocket.
    
    Parameters:
    
    closeCode - The close code embedded in a close frame which this WebSocket client will send to the server.
    
    reason - The reason embedded in a close frame which this WebSocket client will send to the server. Note that the length of the bytes which represents the given reason must not exceed 125. In other words, (reason.getBytes("UTF-8").length <= 125) must be true.
    
    closeDelay - Delay in milliseconds before calling Socket.close() forcibly. This safeguard is needed for the case where the server fails to send back a close frame. The default value is 10000 (= 10 seconds). When a negative value is given, the default value is used. If a very short time (e.g. 0) is given, it is likely to happen either (1) that this client will fail to send a close frame to the server (in this case, you will probably see an error message "Flushing frames to the server failed: Socket closed") or (2) that the WebSocket connection will be closed before this client receives a close frame from the server (in this case, the second argument of WebSocketListener.onDisconnected will be null).
    
    Returns:
    
    this object.
    
    Since:
    
    1.26
    
    See Also:
    
    WebSocketCloseCode, RFC 6455, 5.5.1. Close
  - getAgreedExtensions
```
public List<com.neovisionaries.ws.client.WebSocketExtension> getAgreedExtensions()
```
    Get the agreed extensions.
    This method works correctly only after connect() succeeds (= after the opening handshake succeeds).
    
    Returns:
    
    The agreed extensions.
  - getAgreedProtocol
```
public String getAgreedProtocol()
```
    Get the agreed protocol.
    This method works correctly only after connect() succeeds (= after the opening handshake succeeds).
    
    Returns:
    
    The agreed protocol.
  - sendFrame
```
public WebSocket sendFrame(com.neovisionaries.ws.client.WebSocketFrame frame)
```
    Send a WebSocket frame to the server.
    This method just queues the given frame. Actual transmission is performed asynchronously.
    
    When the current state of this WebSocket is not OPEN, this method does not accept the frame.
    
    Sending a close frame changes the state to CLOSING (if the current state is neither CLOSING nor CLOSED).
    
    Note that the validity of the give frame is not checked. For example, even if the payload length of a given frame is greater than 125 and the opcode indicates that the frame is a control frame, this method accepts the given frame.
    
    Parameters:
    
    frame - A WebSocket frame to be sent to the server. If null is given, nothing is done.
    
    Returns:
    
    this object.
  - sendContinuation
```
public WebSocket sendContinuation()
```
    Send a continuation frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createContinuationFrame()).
    
    Note that the FIN bit of a frame sent by this method is false. If you want to set the FIN bit, use sendContinuation(boolean fin) with fin=true.
    
    Returns:
    
    this object.
  - sendContinuation
```
public WebSocket sendContinuation(boolean fin)
```
    Send a continuation frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createContinuationFrame().setFin(fin)).
    
    Parameters:
    
    fin - The FIN bit value.
    
    Returns:
    
    this object.
  - sendContinuation
```
public WebSocket sendContinuation(String payload)
```
    Send a continuation frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createContinuationFrame(payload)).
    
    Note that the FIN bit of a frame sent by this method is false. If you want to set the FIN bit, use sendContinuation(String payload, boolean fin) with fin=true.
    
    Parameters:
    
    payload - The payload of a continuation frame.
    
    Returns:
    
    this object.
  - sendContinuation
```
public WebSocket sendContinuation(String payload,
                                  boolean fin)
```
    Send a continuation frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createContinuationFrame(payload).setFin(fin)).
    
    Parameters:
    
    payload - The payload of a continuation frame.
    
    fin - The FIN bit value.
    
    Returns:
    
    this object.
  - sendContinuation
```
public WebSocket sendContinuation(byte[] payload)
```
    Send a continuation frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createContinuationFrame(payload)).
    
    Note that the FIN bit of a frame sent by this method is false. If you want to set the FIN bit, use sendContinuation(byte[] payload, boolean fin) with fin=true.
    
    Parameters:
    
    payload - The payload of a continuation frame.
    
    Returns:
    
    this object.
  - sendContinuation
```
public WebSocket sendContinuation(byte[] payload,
                                  boolean fin)
```
    Send a continuation frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createContinuationFrame(payload).setFin(fin)).
    
    Parameters:
    
    payload - The payload of a continuation frame.
    
    fin - The FIN bit value.
    
    Returns:
    
    this object.
  - sendText
```
public WebSocket sendText(String message)
```
    Send a text message to the server.
    This method is an alias of sendFrame(WebSocketFrame.createTextFrame(message)).
    
    If you want to send a text frame that is to be followed by continuation frames, use setText(String payload, boolean fin) with fin=false.
    
    Parameters:
    
    message - A text message to be sent to the server.
    
    Returns:
    
    this object.
  - sendText
```
public WebSocket sendText(String payload,
                          boolean fin)
```
    Send a text frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createTextFrame(payload).setFin(fin)).
    
    Parameters:
    
    payload - The payload of a text frame.
    
    fin - The FIN bit value.
    
    Returns:
    
    this object.
  - sendBinary
```
public WebSocket sendBinary(byte[] message)
```
    Send a binary message to the server.
    This method is an alias of sendFrame(WebSocketFrame.createBinaryFrame(message)).
    
    If you want to send a binary frame that is to be followed by continuation frames, use setBinary(byte[] payload, boolean fin) with fin=false.
    
    Parameters:
    
    message - A binary message to be sent to the server.
    
    Returns:
    
    this object.
  - sendBinary
```
public WebSocket sendBinary(byte[] payload,
                            boolean fin)
```
    Send a binary frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createBinaryFrame(payload).setFin(fin)).
    
    Parameters:
    
    payload - The payload of a binary frame.
    
    fin - The FIN bit value.
    
    Returns:
    
    this object.
  - sendClose
```
public WebSocket sendClose()
```
    Send a close frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createCloseFrame()).
    
    Returns:
    
    this object.
  - sendClose
```
public WebSocket sendClose(int closeCode)
```
    Send a close frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createCloseFrame(closeCode)).
    
    Parameters:
    
    closeCode - The close code.
    
    Returns:
    
    this object.
    
    See Also:
    
    WebSocketCloseCode
  - sendClose
```
public WebSocket sendClose(int closeCode,
                           String reason)
```
    Send a close frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createCloseFrame(closeCode, reason)).
    
    Parameters:
    
    closeCode - The close code.
    
    reason - The close reason. Note that a control frame's payload length must be 125 bytes or less (RFC 6455, 5.5. Control Frames).
    
    Returns:
    
    this object.
    
    See Also:
    
    WebSocketCloseCode
  - sendPing
```
public WebSocket sendPing()
```
    Send a ping frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createPingFrame()).
    
    Returns:
    
    this object.
  - sendPing
```
public WebSocket sendPing(byte[] payload)
```
    Send a ping frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createPingFrame(payload)).
    
    Parameters:
    
    payload - The payload for a ping frame. Note that a control frame's payload length must be 125 bytes or less (RFC 6455, 5.5. Control Frames).
    
    Returns:
    
    this object.
  - sendPing
```
public WebSocket sendPing(String payload)
```
    Send a ping frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createPingFrame(payload)).
    
    Parameters:
    
    payload - The payload for a ping frame. Note that a control frame's payload length must be 125 bytes or less (RFC 6455, 5.5. Control Frames).
    
    Returns:
    
    this object.
  - sendPong
```
public WebSocket sendPong()
```
    Send a pong frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createPongFrame()).
    
    Returns:
    
    this object.
  - sendPong
```
public WebSocket sendPong(byte[] payload)
```
    Send a pong frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createPongFrame(payload)).
    
    Parameters:
    
    payload - The payload for a pong frame. Note that a control frame's payload length must be 125 bytes or less (RFC 6455, 5.5. Control Frames).
    
    Returns:
    
    this object.
  - sendPong
```
public WebSocket sendPong(String payload)
```
    Send a pong frame to the server.
    This method is an alias of sendFrame(WebSocketFrame.createPongFrame(payload)).
    
    Parameters:
    
    payload - The payload for a pong frame. Note that a control frame's payload length must be 125 bytes or less (RFC 6455, 5.5. Control Frames).
    
    Returns:
    
    this object.

Method	Description
`handleCallbackError`	Called when an `onXxx()` method threw a `Throwable`.
`onBinaryFrame`	Called when a binary frame was received.
`onBinaryMessage`	Called when a binary message was received.
`onCloseFrame`	Called when a close frame was received.
`onConnected`	Called after the opening handshake succeeded.
`onConnectError`	Called when `connectAsynchronously()` failed.
`onContinuationFrame`	Called when a continuation frame was received.
`onDisconnected`	Called after a WebSocket connection was closed.
`onError`	Called when an error occurred.
`onFrame`	Called when a frame was received.
`onFrameError`	Called when a frame failed to be read.
`onFrameSent`	Called when a frame was sent.
`onFrameUnsent`	Called when a frame was not sent.
`onMessageDecompressionError`	Called when a message failed to be decompressed.
`onMessageError`	Called when a message failed to be constructed.
`onPingFrame`	Called when a ping frame was received.
`onPongFrame`	Called when a pong frame was received.
`onSendError`	Called when an error occurred on sending a frame.
`onSendingFrame`	Called before a frame is sent.
`onSendingHandshake`	Called before an opening handshake is sent.
`onStateChanged`	Called when the state of WebSocket changed.
`onTextFrame`	Called when a text frame was received.
`onTextMessage`	Called when a text message was received.
`onTextMessageError`	Called when a text message failed to be constructed.
`onThreadCreated`	Called after a thread was created.
`onThreadStarted`	Called at the beginning of a thread's `run()` method.
`onThreadStopping`	Called at the end of a thread's `run()` method.
`onUnexpectedError`	Called when an uncaught throwable was detected.

METHOD	DESCRIPTION
`addProtocol`	Adds an element to `Sec-WebSocket-Protocol`
`addExtension`	Adds an element to `Sec-WebSocket-Extensions`
`addHeader`	Adds an arbitrary HTTP header.
`setUserInfo`	Adds `Authorization` header for Basic Authentication.
`getSocket`	Gets the underlying `Socket` instance to configure it.
`setExtended`	Disables validity checks on RSV1/RSV2/RSV3 and opcode.
`setFrameQueueSize`	Set the size of the frame queue for congestion control.
`setMaxPayloadSize`	Set the maximum payload size.
`setMissingCloseFrameAllowed`	Set whether to allow the server to close the connection without sending a close frame.

THREAD TYPE	DESCRIPTION
`READING_THREAD`	A thread which reads WebSocket frames from the server.
`WRITING_THREAD`	A thread which sends WebSocket frames to the server.
`CONNECT_THREAD`	A thread which calls `connect()` asynchronously.
`FINISH_THREAD`	A thread which does finalization of a `WebSocket` instance.

METHOD	DESCRIPTION
`onThreadCreated()`	Called after a thread was created.
`onThreadStarted()`	Called at the beginning of the thread's `run()` method.
`onThreadStopping()`	Called at the end of the thread's `run()` method.

Class WebSocket

Create WebSocketFactory

HTTP Proxy

Create WebSocket

Register Listener

Configure WebSocket

Connect To Server

Connect To Server Asynchronously

Send Frames

Send Ping/Pong Frames Periodically

Auto Flush

Congestion Control

Maximum Payload Size

Compression

Missing Close Frame

Disconnect WebSocket

Reconnection

Error Handling

Thread Callbacks

Method Summary

Methods inherited from class java.lang.Object

Method Detail

recreate

recreate

finalize

getState

isOpen

setPayloadMask

addProtocol

removeProtocol

clearProtocols

addExtension

addExtension

removeExtension

removeExtensions

clearExtensions

addHeader

removeHeaders

clearHeaders

setUserInfo

setUserInfo

clearUserInfo

isExtended

setExtended

isAutoFlush

setAutoFlush

isMissingCloseFrameAllowed

setMissingCloseFrameAllowed

flush

getFrameQueueSize

setFrameQueueSize

getMaxPayloadSize

setMaxPayloadSize

getPingInterval

setPingInterval

getPongInterval

setPongInterval

getPingPayloadGenerator

setPingPayloadGenerator

getPongPayloadGenerator

setPongPayloadGenerator

addListener

addListeners

removeListener

removeListeners

clearListeners

getSocket

getURI

connect

connect

connectable

connectAsynchronously

disconnect

disconnect

disconnect

disconnect

disconnect

getAgreedExtensions

getAgreedProtocol

sendFrame