Package org.apache.camel

Interface ProducerTemplate

All Superinterfaces:
AutoCloseable, Service
public interface ProducerTemplate extends Service
Template for working with Camel and sending Message instances in an Exchange to an Endpoint.

Important: Read the javadoc of each method carefully to ensure the behavior of the method is understood. Some methods is for InOnly, others for InOut MEP. And some methods throws CamelExecutionException while others stores any thrown exception on the returned Exchange.

The ProducerTemplate is thread safe.

All the methods which sends a message may throw FailedToCreateProducerException in case the Producer could not be created. Or a NoSuchEndpointException if the endpoint could not be resolved. There may be other related exceptions being thrown which occurs before the Producer has started sending the message.

All the sendBody or requestBody methods will return the content according to this strategy:

  • throws CamelExecutionException if processing failed during routing with the caused exception wrapped
  • The fault.body if there is a fault message set and its not null
  • Either IN or OUT body according to the message exchange pattern. If the pattern is Out capable then the OUT body is returned, otherwise IN.

Before using the template it must be started. And when you are done using the template, make sure to Service.stop() the template.

Important note on usage: See this FAQ entry before using.

See Also:

  • Method Details

    • getCamelContext

      CamelContext getCamelContext()
      Get the CamelContext
      Returns:
      camelContext the Camel context

    • getMaximumCacheSize

      int getMaximumCacheSize()
      Gets the maximum cache size used in the backing cache pools.
      Returns:
      the maximum cache size

    • setMaximumCacheSize

      void setMaximumCacheSize(int maximumCacheSize)
      Sets a custom maximum cache size to use in the backing cache pools.
      Parameters:
      maximumCacheSize - the custom maximum cache size

    • getCurrentCacheSize

      int getCurrentCacheSize()
      Gets an approximated size of the current cached resources in the backing cache pools.
      Returns:
      the size of current cached resources

    • isThreadedAsyncMode

      boolean isThreadedAsyncMode()
      Reports if async* methods will dispatch processing from the calling thread (false) or through executor (true). In both cases asynchronous engine will be used, so this non-threaded can be useful for high-speed non-blocking processing.
      Returns:
      if async* methods will dispatch processing with the executor

    • setThreadedAsyncMode

      void setThreadedAsyncMode(boolean useExecutor)
      Reports if async* methods will dispatch processing from the calling thread (false) or through executor (true). In both cases asynchronous engine will be used, so this non-threaded can be useful for high-speed non-blocking processing.
      Parameters:
      useExecutor - if async* methods will dispatch processing with the executor

    • getDefaultEndpoint

      Endpoint getDefaultEndpoint()
      Get the default endpoint to use if none is specified
      Returns:
      the default endpoint instance

    • setDefaultEndpoint

      void setDefaultEndpoint(Endpoint defaultEndpoint)
      Sets the default endpoint to use if none is specified
      Parameters:
      defaultEndpoint - the default endpoint instance

    • setDefaultEndpointUri

      void setDefaultEndpointUri(String endpointUri)
      Sets the default endpoint uri to use if none is specified
      Parameters:
      endpointUri - the default endpoint uri

    • setEventNotifierEnabled

      void setEventNotifierEnabled(boolean enabled)
      Sets whether the EventNotifier should be used by this ProducerTemplate to send events about the Exchange being sent.

      By default this is enabled.

      Parameters:
      enabled - true to enable, false to disable.

    • isEventNotifierEnabled

      boolean isEventNotifierEnabled()
      Whether the EventNotifier should be used by this ProducerTemplate to send events about the Exchange being sent.
      Returns:
      true if enabled, false otherwise

    • cleanUp

      void cleanUp()
      Cleanup the cache (purging stale entries)

    • send

      Exchange send(Exchange exchange)
      Sends the exchange to the default endpoint

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
      Parameters:
      exchange - the exchange to send
      Returns:
      the returned exchange

    • send

      Exchange send(Processor processor)
      Sends an exchange to the default endpoint using a supplied processor

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
      Parameters:
      processor - the transformer used to populate the new exchange Processor to populate the exchange
      Returns:
      the returned exchange

    • sendBody

      void sendBody(Object body) throws CamelExecutionException
      Sends the body to the default endpoint

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      body - the payload to send
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeader

      void sendBodyAndHeader(Object body, String header, Object headerValue) throws CamelExecutionException
      Sends the body to the default endpoint with a specified header and header value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      body - the payload to send
      header - the header name
      headerValue - the header value
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndProperty

      void sendBodyAndProperty(Object body, String property, Object propertyValue) throws CamelExecutionException
      Sends the body to the default endpoint with a specified property and property value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      body - the payload to send
      property - the property name
      propertyValue - the property value
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeaders

      void sendBodyAndHeaders(Object body, Map<String,Object> headers) throws CamelExecutionException
      Sends the body to the default endpoint with the specified headers and header values

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      body - the payload to send
      headers - the headers
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • send

      Exchange send(String endpointUri, Exchange exchange)
      Sends the exchange to the given endpoint

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      exchange - the exchange to send
      Returns:
      the returned exchange
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • send

      Exchange send(String endpointUri, Processor processor)
      Sends an exchange to an endpoint using a supplied processor

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      processor - the transformer used to populate the new exchange Processor to populate the exchange
      Returns:
      the returned exchange
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • send

      Exchange send(String endpointUri, ExchangePattern pattern, Processor processor)
      Sends an exchange to an endpoint using a supplied processor

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      processor - the transformer used to populate the new exchange Processor to populate the exchange
      Returns:
      the returned exchange

    • send

      Exchange send(Endpoint endpoint, Exchange exchange)
      Sends the exchange to the given endpoint

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpoint - the endpoint to send the exchange to
      exchange - the exchange to send
      Returns:
      the returned exchange

    • send

      Exchange send(Endpoint endpoint, Processor processor)
      Sends an exchange to an endpoint using a supplied processor

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpoint - the endpoint to send the exchange to
      processor - the transformer used to populate the new exchange Processor to populate the exchange
      Returns:
      the returned exchange

    • send

      Exchange send(Endpoint endpoint, ExchangePattern pattern, Processor processor)
      Sends an exchange to an endpoint using a supplied processor

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpoint - the endpoint to send the exchange to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      processor - the transformer used to populate the new exchange Processor to populate the exchange
      Returns:
      the returned exchange

    • send

      Exchange send(Endpoint endpoint, ExchangePattern pattern, Processor processor, Processor resultProcessor)
      Sends an exchange to an endpoint using a supplied processor

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpoint - the endpoint to send the exchange to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      processor - the transformer used to populate the new exchange
      resultProcessor - a processor to process the exchange when the send is complete. Processor to populate the exchange
      Returns:
      the returned exchange

    • sendBody

      void sendBody(Endpoint endpoint, Object body) throws CamelExecutionException
      Send the body to an endpoint

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the payload
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBody

      void sendBody(String endpointUri, Object body) throws CamelExecutionException
      Send the body to an endpoint

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      body - the payload
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBody

      Object sendBody(Endpoint endpoint, ExchangePattern pattern, Object body) throws CamelExecutionException
      Send the body to an endpoint with the given ExchangePattern returning any result output body

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the payload
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      Returns:
      the result if ExchangePattern is OUT capable, otherwise null
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBody

      Object sendBody(String endpointUri, ExchangePattern pattern, Object body) throws CamelExecutionException
      Send the body to an endpoint returning any result output body

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      body - the payload
      Returns:
      the result if ExchangePattern is OUT capable, otherwise null
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeader

      void sendBodyAndHeader(String endpointUri, Object body, String header, Object headerValue) throws CamelExecutionException
      Sends the body to an endpoint with a specified header and header value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload to send
      header - the header name
      headerValue - the header value
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeader

      void sendBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue) throws CamelExecutionException
      Sends the body to an endpoint with a specified header and header value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint to send to
      body - the payload to send
      header - the header name
      headerValue - the header value
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeader

      Object sendBodyAndHeader(Endpoint endpoint, ExchangePattern pattern, Object body, String header, Object headerValue) throws CamelExecutionException
      Sends the body to an endpoint with a specified header and header value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint to send to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      body - the payload to send
      header - the header name
      headerValue - the header value
      Returns:
      the result if ExchangePattern is OUT capable, otherwise null
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeader

      Object sendBodyAndHeader(String endpoint, ExchangePattern pattern, Object body, String header, Object headerValue) throws CamelExecutionException
      Sends the body to an endpoint with a specified header and header value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint URI to send to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      body - the payload to send
      header - the header name
      headerValue - the header value
      Returns:
      the result if ExchangePattern is OUT capable, otherwise null
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndProperty

      void sendBodyAndProperty(String endpointUri, Object body, String property, Object propertyValue) throws CamelExecutionException
      Sends the body to an endpoint with a specified property and property value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload to send
      property - the property name
      propertyValue - the property value
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndProperty

      void sendBodyAndProperty(Endpoint endpoint, Object body, String property, Object propertyValue) throws CamelExecutionException
      Sends the body to an endpoint with a specified property and property value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint to send to
      body - the payload to send
      property - the property name
      propertyValue - the property value
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndProperty

      Object sendBodyAndProperty(Endpoint endpoint, ExchangePattern pattern, Object body, String property, Object propertyValue) throws CamelExecutionException
      Sends the body to an endpoint with a specified property and property value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint to send to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      body - the payload to send
      property - the property name
      propertyValue - the property value
      Returns:
      the result if ExchangePattern is OUT capable, otherwise null
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndProperty

      Object sendBodyAndProperty(String endpoint, ExchangePattern pattern, Object body, String property, Object propertyValue) throws CamelExecutionException
      Sends the body to an endpoint with a specified property and property value

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint URI to send to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      body - the payload to send
      property - the property name
      propertyValue - the property value
      Returns:
      the result if ExchangePattern is OUT capable, otherwise null
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeaders

      void sendBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers) throws CamelExecutionException
      Sends the body to an endpoint with the specified headers and header values

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload to send
      headers - headers
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeaders

      void sendBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers) throws CamelExecutionException
      Sends the body to an endpoint with the specified headers and header values

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the endpoint URI to send to
      body - the payload to send
      headers - headers
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeaders

      Object sendBodyAndHeaders(String endpointUri, ExchangePattern pattern, Object body, Map<String,Object> headers) throws CamelExecutionException
      Sends the body to an endpoint with the specified headers and header values

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      body - the payload to send
      headers - headers
      Returns:
      the result if ExchangePattern is OUT capable, otherwise null
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • sendBodyAndHeaders

      Object sendBodyAndHeaders(Endpoint endpoint, ExchangePattern pattern, Object body, Map<String,Object> headers) throws CamelExecutionException
      Sends the body to an endpoint with the specified headers and header values

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the endpoint URI to send to
      pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
      body - the payload to send
      headers - headers
      Returns:
      the result if ExchangePattern is OUT capable, otherwise null
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • request

      Exchange request(Endpoint endpoint, Processor processor)
      Sends an exchange to an endpoint using a supplied processor Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpoint - the Endpoint to send to
      processor - the processor which will populate the exchange before sending
      Returns:
      the result (see class javadoc)

    • request

      Exchange request(String endpointUri, Processor processor)
      Sends an exchange to an endpoint using a supplied processor Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().

      Parameters:
      endpointUri - the endpoint URI to send to
      processor - the processor which will populate the exchange before sending
      Returns:
      the result (see class javadoc)

    • requestBody

      Object requestBody(Object body) throws CamelExecutionException
      Sends the body to the default endpoint and returns the result content Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      body - the payload to send
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBody

      <T> T requestBody(Object body, Class<T> type) throws CamelExecutionException
      Sends the body to the default endpoint and returns the result content Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      body - the payload to send
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBody

      Object requestBody(Endpoint endpoint, Object body) throws CamelExecutionException
      Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint to send to
      body - the payload
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBody

      <T> T requestBody(Endpoint endpoint, Object body, Class<T> type) throws CamelExecutionException
      Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint to send to
      body - the payload
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBody

      Object requestBody(String endpointUri, Object body) throws CamelExecutionException
      Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBody

      <T> T requestBody(String endpointUri, Object body, Class<T> type) throws CamelExecutionException
      Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeader

      Object requestBodyAndHeader(Object body, String header, Object headerValue) throws CamelExecutionException
      Sends the body to the default endpoint and returns the result content Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      body - the payload
      header - the header name
      headerValue - the header value
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeader

      Object requestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue) throws CamelExecutionException
      Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint to send to
      body - the payload
      header - the header name
      headerValue - the header value
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeader

      <T> T requestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue, Class<T> type) throws CamelExecutionException
      Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the Endpoint to send to
      body - the payload
      header - the header name
      headerValue - the header value
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeader

      Object requestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue) throws CamelExecutionException
      Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload
      header - the header name
      headerValue - the header value
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeader

      <T> T requestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue, Class<T> type) throws CamelExecutionException
      Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload
      header - the header name
      headerValue - the header value
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeaders

      Object requestBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers) throws CamelExecutionException
      Sends the body to an endpoint with the specified headers and header values. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload to send
      headers - headers
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeaders

      <T> T requestBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers, Class<T> type) throws CamelExecutionException
      Sends the body to an endpoint with the specified headers and header values. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpointUri - the endpoint URI to send to
      body - the payload to send
      headers - headers
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeaders

      Object requestBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers) throws CamelExecutionException
      Sends the body to an endpoint with the specified headers and header values. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the endpoint URI to send to
      body - the payload to send
      headers - headers
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeaders

      Object requestBodyAndHeaders(Object body, Map<String,Object> headers) throws CamelExecutionException
      Sends the body to the default endpoint and returns the result content Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      body - the payload to send
      headers - headers
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • requestBodyAndHeaders

      <T> T requestBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers, Class<T> type) throws CamelExecutionException
      Sends the body to an endpoint with the specified headers and header values. Uses an ExchangePattern.InOut message exchange pattern.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      endpoint - the endpoint URI to send to
      body - the payload to send
      headers - headers
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • setExecutorService

      void setExecutorService(ExecutorService executorService)
      Sets a custom executor service to use for async messaging.
      Parameters:
      executorService - the executor service.

    • asyncSend

      CompletableFuture<Exchange> asyncSend(String endpointUri, Exchange exchange)
      Sends an asynchronous exchange to the given endpoint.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      exchange - the exchange to send
      Returns:
      a handle to be used to get the response in the future

    • asyncSend

      CompletableFuture<Exchange> asyncSend(String endpointUri, Processor processor)
      Sends an asynchronous exchange to the given endpoint. Important: The transformer processor is invoked by a thread from the underlying thread pool, when the task is running to send the exchange asynchronously. In other words mind about thread-safety when using the transformer processor.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      processor - the transformer used to populate the new exchange
      Returns:
      a handle to be used to get the response in the future

    • asyncSendBody

      CompletableFuture<Object> asyncSendBody(String endpointUri, Object body)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOnly message exchange pattern.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      body - the body to send
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBody

      CompletableFuture<Object> asyncRequestBody(String endpointUri, Object body)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      body - the body to send
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBodyAndHeader

      CompletableFuture<Object> asyncRequestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      body - the body to send
      header - the header name
      headerValue - the header value
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBodyAndHeaders

      CompletableFuture<Object> asyncRequestBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      body - the body to send
      headers - headers
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBody

      <T> CompletableFuture<T> asyncRequestBody(String endpointUri, Object body, Class<T> type)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      body - the body to send
      type - the expected response type
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBodyAndHeader

      <T> CompletableFuture<T> asyncRequestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue, Class<T> type)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      body - the body to send
      header - the header name
      headerValue - the header value
      type - the expected response type
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBodyAndHeaders

      <T> CompletableFuture<T> asyncRequestBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers, Class<T> type)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpointUri - the endpoint URI to send the exchange to
      body - the body to send
      headers - headers
      type - the expected response type
      Returns:
      a handle to be used to get the response in the future

    • asyncSend

      CompletableFuture<Exchange> asyncSend(Endpoint endpoint, Exchange exchange)
      Sends an asynchronous exchange to the given endpoint.
      Parameters:
      endpoint - the endpoint to send the exchange to
      exchange - the exchange to send
      Returns:
      a handle to be used to get the response in the future

    • asyncSend

      CompletableFuture<Exchange> asyncSend(Endpoint endpoint, Processor processor)
      Sends an asynchronous exchange to the given endpoint. Important: The transformer processor is invoked by a thread from the underlying thread pool, when the task is running to send the exchange asynchronously. In other words mind about thread-safety when using the transformer processor.
      Parameters:
      endpoint - the endpoint to send the exchange to
      processor - the transformer used to populate the new exchange
      Returns:
      a handle to be used to get the response in the future

    • asyncSendBody

      CompletableFuture<Object> asyncSendBody(Endpoint endpoint, Object body)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOnly message exchange pattern.
      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the body to send
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBody

      CompletableFuture<Object> asyncRequestBody(Endpoint endpoint, Object body)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the body to send
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBodyAndHeader

      CompletableFuture<Object> asyncRequestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the body to send
      header - the header name
      headerValue - the header value
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBodyAndHeaders

      CompletableFuture<Object> asyncRequestBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the body to send
      headers - headers
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBody

      <T> CompletableFuture<T> asyncRequestBody(Endpoint endpoint, Object body, Class<T> type)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the body to send
      type - the expected response type
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBodyAndHeader

      <T> CompletableFuture<T> asyncRequestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue, Class<T> type)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the body to send
      header - the header name
      headerValue - the header value
      type - the expected response type
      Returns:
      a handle to be used to get the response in the future

    • asyncRequestBodyAndHeaders

      <T> CompletableFuture<T> asyncRequestBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers, Class<T> type)
      Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
      Parameters:
      endpoint - the endpoint to send the exchange to
      body - the body to send
      headers - headers
      type - the expected response type
      Returns:
      a handle to be used to get the response in the future

    • extractFutureBody

      <T> T extractFutureBody(Future<?> future, Class<T> type) throws CamelExecutionException
      Gets the response body from the future handle, will wait until the response is ready.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      future - the handle to get the response
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      CamelExecutionException - if the processing of the exchange failed

    • extractFutureBody

      <T> T extractFutureBody(Future<?> future, long timeout, TimeUnit unit, Class<T> type) throws TimeoutException, CamelExecutionException
      Gets the response body from the future handle, will wait at most the given time for the response to be ready.

      Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.

      Parameters:
      future - the handle to get the response
      timeout - the maximum time to wait
      unit - the time unit of the timeout argument
      type - the expected response type
      Returns:
      the result (see class javadoc)
      Throws:
      TimeoutException - if the wait timed out
      CamelExecutionException - if the processing of the exchange failed