Interface DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
-
- All Superinterfaces:
ComponentBuilder<org.apache.camel.component.debezium.DebeziumMySqlComponent>
- All Known Implementing Classes:
DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilderImpl
- Enclosing interface:
- DebeziumMysqlComponentBuilderFactory
public static interface DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder extends ComponentBuilder<org.apache.camel.component.debezium.DebeziumMySqlComponent>
Builder for the Debezium MySQL Connector component.
-
-
Method Summary
All Methods Instance Methods Default Methods Modifier and Type Method Description default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
additionalProperties(Map<String,Object> additionalProperties)
Additional properties for debezium components in case they can't be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties..default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
autowiredEnabled(boolean autowiredEnabled)
Whether autowiring is enabled.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
bigintUnsignedHandlingMode(String bigintUnsignedHandlingMode)
Specify how BIGINT UNSIGNED columns should be represented in change events, including:'precise' uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect's 'org.apache.kafka.connect.data.Decimal' type; 'long' (the default) represents values using Java's 'long', which may not offer the precision but will be far easier to use in consumers.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
binaryHandlingMode(String binaryHandlingMode)
Specify how binary (blob, binary, etc.) columns should be represented in change events, including:'bytes' represents binary data as byte array (default)'base64' represents binary data as base64-encoded string'hex' represents binary data as hex-encoded (base16) string.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
binlogBufferSize(int binlogBufferSize)
The size of a look-ahead buffer used by the binlog reader to decide whether the transaction in progress is going to be committed or rolled back.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
bridgeErrorHandler(boolean bridgeErrorHandler)
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
columnBlacklist(String columnBlacklist)
Regular expressions matching columns to exclude from change events (deprecated, use column.exclude.list instead).default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
columnExcludeList(String columnExcludeList)
Regular expressions matching columns to exclude from change events.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
columnIncludeList(String columnIncludeList)
Regular expressions matching columns to include in change events.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
columnPropagateSourceType(String columnPropagateSourceType)
A comma-separated list of regular expressions matching fully-qualified names of columns that adds the columns original type and original length as parameters to the corresponding field schemas in the emitted change records.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
columnWhitelist(String columnWhitelist)
Regular expressions matching columns to include in change events (deprecated, use column.include.list instead).default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
configuration(org.apache.camel.component.debezium.configuration.MySqlConnectorEmbeddedDebeziumConfiguration configuration)
Allow pre-configured Configurations to be set.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
connectKeepAlive(boolean connectKeepAlive)
Whether a separate thread should be used to ensure the connection is kept alive.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
connectKeepAliveIntervalMs(long connectKeepAliveIntervalMs)
Interval for connection checking if keep alive thread is used, given in milliseconds Defaults to 1 minute (60,000 ms).default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
connectTimeoutMs(int connectTimeoutMs)
Maximum time to wait after trying to connect to the database before timing out, given in milliseconds.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
converters(String converters)
Optional list of custom converters that would be used instead of default ones.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseExcludeList(String databaseExcludeList)
A comma-separated list of regular expressions that match database names to be excluded from monitoring.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistory(String databaseHistory)
The name of the DatabaseHistory class that should be used to store and recover database schema changes.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistoryFileFilename(String databaseHistoryFileFilename)
The path to the file that will be used to record the database history.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistoryKafkaBootstrapServers(String databaseHistoryKafkaBootstrapServers)
A list of host/port pairs that the connector will use for establishing the initial connection to the Kafka cluster for retrieving database schema history previously stored by the connector.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistoryKafkaQueryTimeoutMs(long databaseHistoryKafkaQueryTimeoutMs)
The number of milliseconds to wait while fetching cluster information using Kafka admin client.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistoryKafkaRecoveryAttempts(int databaseHistoryKafkaRecoveryAttempts)
The number of attempts in a row that no data are returned from Kafka before recover completes.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistoryKafkaRecoveryPollIntervalMs(int databaseHistoryKafkaRecoveryPollIntervalMs)
The number of milliseconds to wait while polling for persisted data during recovery.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistoryKafkaTopic(String databaseHistoryKafkaTopic)
The name of the topic for the database schema history.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistorySkipUnparseableDdl(boolean databaseHistorySkipUnparseableDdl)
Controls the action Debezium will take when it meets a DDL statement in binlog, that it cannot parse.By default the connector will stop operating but by changing the setting it can ignore the statements which it cannot parse.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistoryStoreOnlyCapturedTablesDdl(boolean databaseHistoryStoreOnlyCapturedTablesDdl)
Controls what DDL will Debezium store in database history.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHistoryStoreOnlyMonitoredTablesDdl(boolean databaseHistoryStoreOnlyMonitoredTablesDdl)
Controls what DDL will Debezium store in database history.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseHostname(String databaseHostname)
Resolvable hostname or IP address of the database server.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseIncludeList(String databaseIncludeList)
The databases for which changes are to be captured.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseInitialStatements(String databaseInitialStatements)
A semicolon separated list of SQL statements to be executed when a JDBC connection (not binlog reading connection) to the database is established.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseJdbcDriver(String databaseJdbcDriver)
JDBC Driver class name used to connect to the MySQL database server.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databasePassword(String databasePassword)
Password of the database user to be used when connecting to the database.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databasePort(int databasePort)
Port of the database server.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseServerId(long databaseServerId)
A numeric ID of this database client, which must be unique across all currently-running database processes in the cluster.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseServerIdOffset(long databaseServerIdOffset)
Only relevant if parallel snapshotting is configured.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseServerName(String databaseServerName)
Unique name that identifies the database server and all recorded offsets, and that is used as a prefix for all schemas and topics.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseSslKeystore(String databaseSslKeystore)
The location of the key store file.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseSslKeystorePassword(String databaseSslKeystorePassword)
The password for the key store file.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseSslMode(String databaseSslMode)
Whether to use an encrypted connection to MySQL.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseSslTruststore(String databaseSslTruststore)
The location of the trust store file for the server certificate verification.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseSslTruststorePassword(String databaseSslTruststorePassword)
The password for the trust store file.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
databaseUser(String databaseUser)
Name of the database user to be used when connecting to the database.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
datatypePropagateSourceType(String datatypePropagateSourceType)
A comma-separated list of regular expressions matching the database-specific data type names that adds the data type's original type and original length as parameters to the corresponding field schemas in the emitted change records.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
decimalHandlingMode(String decimalHandlingMode)
Specify how DECIMAL and NUMERIC columns should be represented in change events, including:'precise' (the default) uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect's 'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent values; 'double' represents values using Java's 'double', which may not offer the precision but will be far easier to use in consumers.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
enableTimeAdjuster(boolean enableTimeAdjuster)
MySQL allows user to insert year value as either 2-digit or 4-digit.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
eventDeserializationFailureHandlingMode(String eventDeserializationFailureHandlingMode)
Specify how failures during deserialization of binlog events (i.e.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
eventProcessingFailureHandlingMode(String eventProcessingFailureHandlingMode)
Specify how failures during processing of events (i.e.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
gtidSourceExcludes(String gtidSourceExcludes)
The source UUIDs used to exclude GTID ranges when determine the starting position in the MySQL server's binlog.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
gtidSourceFilterDmlEvents(boolean gtidSourceFilterDmlEvents)
If set to true, we will only produce DML events into Kafka for transactions that were written on mysql servers with UUIDs matching the filters defined by the gtid.source.includes or gtid.source.excludes configuration options, if they are specified.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
gtidSourceIncludes(String gtidSourceIncludes)
The source UUIDs used to include GTID ranges when determine the starting position in the MySQL server's binlog.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
heartbeatActionQuery(String heartbeatActionQuery)
The query executed with every heartbeat.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
heartbeatIntervalMs(int heartbeatIntervalMs)
Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
heartbeatTopicsPrefix(String heartbeatTopicsPrefix)
The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
includeQuery(boolean includeQuery)
Whether the connector should include the original SQL query that generated the change event.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
includeSchemaChanges(boolean includeSchemaChanges)
Whether the connector should publish changes in the database schema to a Kafka topic with the same name as the database server ID.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
includeSchemaComments(boolean includeSchemaComments)
Whether the connector parse table and column's comment to metadata object.Note: Enable this option will bring the implications on memory usage.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
inconsistentSchemaHandlingMode(String inconsistentSchemaHandlingMode)
Specify how binlog events that belong to a table missing from internal schema representation (i.e.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
incrementalSnapshotAllowSchemaChanges(boolean incrementalSnapshotAllowSchemaChanges)
Detect schema change during an incremental snapshot and re-select a current chunk to avoid locking DDLs.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
incrementalSnapshotChunkSize(int incrementalSnapshotChunkSize)
The maximum size of chunk for incremental snapshotting.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
internalKeyConverter(String internalKeyConverter)
The Converter class that should be used to serialize and deserialize key data for offsets.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
internalValueConverter(String internalValueConverter)
The Converter class that should be used to serialize and deserialize value data for offsets.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
maxBatchSize(int maxBatchSize)
Maximum size of each batch of source records.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
maxQueueSize(int maxQueueSize)
Maximum size of the queue for change events read from the database log but not yet recorded or forwarded.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
maxQueueSizeInBytes(long maxQueueSizeInBytes)
Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
messageKeyColumns(String messageKeyColumns)
A semicolon-separated list of expressions that match fully-qualified tables and column(s) to be used as message key.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
minRowCountToStreamResults(int minRowCountToStreamResults)
The number of rows a table must contain to stream results rather than pull all into memory during snapshots.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
offsetCommitPolicy(String offsetCommitPolicy)
The name of the Java class of the commit policy.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
offsetCommitTimeoutMs(long offsetCommitTimeoutMs)
Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
offsetFlushIntervalMs(long offsetFlushIntervalMs)
Interval at which to try committing offsets.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
offsetStorage(String offsetStorage)
The name of the Java class that is responsible for persistence of connector offsets.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
offsetStorageFileName(String offsetStorageFileName)
Path to file where offsets are to be stored.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
offsetStoragePartitions(int offsetStoragePartitions)
The number of partitions used when creating the offset storage topic.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
offsetStorageReplicationFactor(int offsetStorageReplicationFactor)
Replication factor used when creating the offset storage topic.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
offsetStorageTopic(String offsetStorageTopic)
The name of the Kafka topic where offsets are to be stored.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
pollIntervalMs(long pollIntervalMs)
Time to wait for new change events to appear after receiving no events, given in milliseconds.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
provideTransactionMetadata(boolean provideTransactionMetadata)
Enables transaction metadata extraction together with event counting.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
queryFetchSize(int queryFetchSize)
The maximum number of records that should be loaded into memory while streaming.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
retriableRestartConnectorWaitMs(long retriableRestartConnectorWaitMs)
Time to wait before restarting connector after retriable exception occurs.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
sanitizeFieldNames(boolean sanitizeFieldNames)
Whether field names will be sanitized to Avro naming conventions.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
schemaNameAdjustmentMode(String schemaNameAdjustmentMode)
Specify how schema names should be adjusted for compatibility with the message converter used by the connector, including:'avro' replaces the characters that cannot be used in the Avro type name with underscore (default)'none' does not apply any adjustment.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
signalDataCollection(String signalDataCollection)
The name of the data collection that is used to send signals/commands to Debezium.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
skippedOperations(String skippedOperations)
The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes, 't' for truncates, and 'none' to indicate nothing skipped.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotDelayMs(long snapshotDelayMs)
A delay period before a snapshot will begin, given in milliseconds.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotFetchSize(int snapshotFetchSize)
The maximum number of records that should be loaded into memory while performing a snapshot.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotIncludeCollectionList(String snapshotIncludeCollectionList)
this setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotLockingMode(String snapshotLockingMode)
Controls how long the connector holds onto the global read lock while it is performing a snapshot.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotLockTimeoutMs(long snapshotLockTimeoutMs)
The maximum number of millis to wait for table locks at the beginning of a snapshot.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotMaxThreads(int snapshotMaxThreads)
The maximum number of threads used to perform the snapshot.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotMode(String snapshotMode)
The criteria for running a snapshot upon startup of the connector.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotNewTables(String snapshotNewTables)
BETA FEATURE: On connector restart, the connector will check if there have been any new tables added to the configuration, and snapshot them.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
snapshotSelectStatementOverrides(String snapshotSelectStatementOverrides)
This property contains a comma-separated list of fully-qualified tables (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on thespecific connectors.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
sourceStructVersion(String sourceStructVersion)
A version of the format of the publicly visible source part in the message.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
tableBlacklist(String tableBlacklist)
A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring (deprecated, use table.exclude.list instead).default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
tableExcludeList(String tableExcludeList)
A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
tableIgnoreBuiltin(boolean tableIgnoreBuiltin)
Flag specifying whether built-in tables should be ignored.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
tableIncludeList(String tableIncludeList)
The tables for which changes are to be captured.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
tableWhitelist(String tableWhitelist)
The tables for which changes are to be captured (deprecated, use table.include.list instead).default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
timePrecisionMode(String timePrecisionMode)
Time, date and timestamps can be represented with different kinds of precisions, including:'adaptive_time_microseconds': the precision of date and timestamp values is based the database column's precision; but time fields always use microseconds precision;'connect': always represents time, date and timestamp values using Kafka Connect's built-in representations for Time, Date, and Timestamp, which uses millisecond precision regardless of the database columns' precision.default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
tombstonesOnDelete(boolean tombstonesOnDelete)
Whether delete operations should be represented by a delete event and a subsquenttombstone event (true) or only by a delete event (false).default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder
transactionTopic(String transactionTopic)
The name of the transaction metadata topic.-
Methods inherited from interface org.apache.camel.builder.component.ComponentBuilder
build, build, doSetProperty, register
-
-
-
-
Method Detail
-
additionalProperties
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder additionalProperties(Map<String,Object> additionalProperties)
Additional properties for debezium components in case they can't be set directly on the camel configurations (e.g: setting Kafka Connect properties needed by Debezium engine, for example setting KafkaOffsetBackingStore), the properties have to be prefixed with additionalProperties.. E.g: additionalProperties.transactional.id=12345&additionalProperties.schema.registry.url=http://localhost:8811/avro. The option is a: <code>java.util.Map<java.lang.String, java.lang.Object></code> type. Group: common- Parameters:
additionalProperties
- the value to set- Returns:
- the dsl builder
-
bridgeErrorHandler
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder bridgeErrorHandler(boolean bridgeErrorHandler)
Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. The option is a: <code>boolean</code> type. Default: false Group: consumer- Parameters:
bridgeErrorHandler
- the value to set- Returns:
- the dsl builder
-
configuration
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder configuration(org.apache.camel.component.debezium.configuration.MySqlConnectorEmbeddedDebeziumConfiguration configuration)
Allow pre-configured Configurations to be set. The option is a: <code>org.apache.camel.component.debezium.configuration.MySqlConnectorEmbeddedDebeziumConfiguration</code> type. Group: consumer- Parameters:
configuration
- the value to set- Returns:
- the dsl builder
-
internalKeyConverter
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder internalKeyConverter(String internalKeyConverter)
The Converter class that should be used to serialize and deserialize key data for offsets. The default is JSON converter. The option is a: <code>java.lang.String</code> type. Default: org.apache.kafka.connect.json.JsonConverter Group: consumer- Parameters:
internalKeyConverter
- the value to set- Returns:
- the dsl builder
-
internalValueConverter
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder internalValueConverter(String internalValueConverter)
The Converter class that should be used to serialize and deserialize value data for offsets. The default is JSON converter. The option is a: <code>java.lang.String</code> type. Default: org.apache.kafka.connect.json.JsonConverter Group: consumer- Parameters:
internalValueConverter
- the value to set- Returns:
- the dsl builder
-
offsetCommitPolicy
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder offsetCommitPolicy(String offsetCommitPolicy)
The name of the Java class of the commit policy. It defines when offsets commit has to be triggered based on the number of events processed and the time elapsed since the last commit. This class must implement the interface 'OffsetCommitPolicy'. The default is a periodic commit policy based upon time intervals. The option is a: <code>java.lang.String</code> type. Default: io.debezium.embedded.spi.OffsetCommitPolicy.PeriodicCommitOffsetPolicy Group: consumer- Parameters:
offsetCommitPolicy
- the value to set- Returns:
- the dsl builder
-
offsetCommitTimeoutMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder offsetCommitTimeoutMs(long offsetCommitTimeoutMs)
Maximum number of milliseconds to wait for records to flush and partition offset data to be committed to offset storage before cancelling the process and restoring the offset data to be committed in a future attempt. The default is 5 seconds. The option is a: <code>long</code> type. Default: 5000 Group: consumer- Parameters:
offsetCommitTimeoutMs
- the value to set- Returns:
- the dsl builder
-
offsetFlushIntervalMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder offsetFlushIntervalMs(long offsetFlushIntervalMs)
Interval at which to try committing offsets. The default is 1 minute. The option is a: <code>long</code> type. Default: 60000 Group: consumer- Parameters:
offsetFlushIntervalMs
- the value to set- Returns:
- the dsl builder
-
offsetStorage
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder offsetStorage(String offsetStorage)
The name of the Java class that is responsible for persistence of connector offsets. The option is a: <code>java.lang.String</code> type. Default: org.apache.kafka.connect.storage.FileOffsetBackingStore Group: consumer- Parameters:
offsetStorage
- the value to set- Returns:
- the dsl builder
-
offsetStorageFileName
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder offsetStorageFileName(String offsetStorageFileName)
Path to file where offsets are to be stored. Required when offset.storage is set to the FileOffsetBackingStore. The option is a: <code>java.lang.String</code> type. Group: consumer- Parameters:
offsetStorageFileName
- the value to set- Returns:
- the dsl builder
-
offsetStoragePartitions
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder offsetStoragePartitions(int offsetStoragePartitions)
The number of partitions used when creating the offset storage topic. Required when offset.storage is set to the 'KafkaOffsetBackingStore'. The option is a: <code>int</code> type. Group: consumer- Parameters:
offsetStoragePartitions
- the value to set- Returns:
- the dsl builder
-
offsetStorageReplicationFactor
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder offsetStorageReplicationFactor(int offsetStorageReplicationFactor)
Replication factor used when creating the offset storage topic. Required when offset.storage is set to the KafkaOffsetBackingStore. The option is a: <code>int</code> type. Group: consumer- Parameters:
offsetStorageReplicationFactor
- the value to set- Returns:
- the dsl builder
-
offsetStorageTopic
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder offsetStorageTopic(String offsetStorageTopic)
The name of the Kafka topic where offsets are to be stored. Required when offset.storage is set to the KafkaOffsetBackingStore. The option is a: <code>java.lang.String</code> type. Group: consumer- Parameters:
offsetStorageTopic
- the value to set- Returns:
- the dsl builder
-
autowiredEnabled
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder autowiredEnabled(boolean autowiredEnabled)
Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. The option is a: <code>boolean</code> type. Default: true Group: advanced- Parameters:
autowiredEnabled
- the value to set- Returns:
- the dsl builder
-
bigintUnsignedHandlingMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder bigintUnsignedHandlingMode(String bigintUnsignedHandlingMode)
Specify how BIGINT UNSIGNED columns should be represented in change events, including:'precise' uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect's 'org.apache.kafka.connect.data.Decimal' type; 'long' (the default) represents values using Java's 'long', which may not offer the precision but will be far easier to use in consumers. The option is a: <code>java.lang.String</code> type. Default: long Group: mysql- Parameters:
bigintUnsignedHandlingMode
- the value to set- Returns:
- the dsl builder
-
binaryHandlingMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder binaryHandlingMode(String binaryHandlingMode)
Specify how binary (blob, binary, etc.) columns should be represented in change events, including:'bytes' represents binary data as byte array (default)'base64' represents binary data as base64-encoded string'hex' represents binary data as hex-encoded (base16) string. The option is a: <code>java.lang.String</code> type. Default: bytes Group: mysql- Parameters:
binaryHandlingMode
- the value to set- Returns:
- the dsl builder
-
binlogBufferSize
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder binlogBufferSize(int binlogBufferSize)
The size of a look-ahead buffer used by the binlog reader to decide whether the transaction in progress is going to be committed or rolled back. Use 0 to disable look-ahead buffering. Defaults to 0 (i.e. buffering is disabled). The option is a: <code>int</code> type. Default: 0 Group: mysql- Parameters:
binlogBufferSize
- the value to set- Returns:
- the dsl builder
-
columnBlacklist
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder columnBlacklist(String columnBlacklist)
Regular expressions matching columns to exclude from change events (deprecated, use column.exclude.list instead). The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
columnBlacklist
- the value to set- Returns:
- the dsl builder
-
columnExcludeList
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder columnExcludeList(String columnExcludeList)
Regular expressions matching columns to exclude from change events. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
columnExcludeList
- the value to set- Returns:
- the dsl builder
-
columnIncludeList
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder columnIncludeList(String columnIncludeList)
Regular expressions matching columns to include in change events. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
columnIncludeList
- the value to set- Returns:
- the dsl builder
-
columnPropagateSourceType
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder columnPropagateSourceType(String columnPropagateSourceType)
A comma-separated list of regular expressions matching fully-qualified names of columns that adds the columns original type and original length as parameters to the corresponding field schemas in the emitted change records. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
columnPropagateSourceType
- the value to set- Returns:
- the dsl builder
-
columnWhitelist
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder columnWhitelist(String columnWhitelist)
Regular expressions matching columns to include in change events (deprecated, use column.include.list instead). The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
columnWhitelist
- the value to set- Returns:
- the dsl builder
-
connectKeepAlive
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder connectKeepAlive(boolean connectKeepAlive)
Whether a separate thread should be used to ensure the connection is kept alive. The option is a: <code>boolean</code> type. Default: true Group: mysql- Parameters:
connectKeepAlive
- the value to set- Returns:
- the dsl builder
-
connectKeepAliveIntervalMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder connectKeepAliveIntervalMs(long connectKeepAliveIntervalMs)
Interval for connection checking if keep alive thread is used, given in milliseconds Defaults to 1 minute (60,000 ms). The option is a: <code>long</code> type. Default: 1m Group: mysql- Parameters:
connectKeepAliveIntervalMs
- the value to set- Returns:
- the dsl builder
-
connectTimeoutMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder connectTimeoutMs(int connectTimeoutMs)
Maximum time to wait after trying to connect to the database before timing out, given in milliseconds. Defaults to 30 seconds (30,000 ms). The option is a: <code>int</code> type. Default: 30s Group: mysql- Parameters:
connectTimeoutMs
- the value to set- Returns:
- the dsl builder
-
converters
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder converters(String converters)
Optional list of custom converters that would be used instead of default ones. The converters are defined using '.type' config option and configured using options '.'. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
converters
- the value to set- Returns:
- the dsl builder
-
databaseExcludeList
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseExcludeList(String databaseExcludeList)
A comma-separated list of regular expressions that match database names to be excluded from monitoring. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseExcludeList
- the value to set- Returns:
- the dsl builder
-
databaseHistory
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistory(String databaseHistory)
The name of the DatabaseHistory class that should be used to store and recover database schema changes. The configuration properties for the history are prefixed with the 'database.history.' string. The option is a: <code>java.lang.String</code> type. Default: io.debezium.relational.history.FileDatabaseHistory Group: mysql- Parameters:
databaseHistory
- the value to set- Returns:
- the dsl builder
-
databaseHistoryFileFilename
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistoryFileFilename(String databaseHistoryFileFilename)
The path to the file that will be used to record the database history. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseHistoryFileFilename
- the value to set- Returns:
- the dsl builder
-
databaseHistoryKafkaBootstrapServers
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistoryKafkaBootstrapServers(String databaseHistoryKafkaBootstrapServers)
A list of host/port pairs that the connector will use for establishing the initial connection to the Kafka cluster for retrieving database schema history previously stored by the connector. This should point to the same Kafka cluster used by the Kafka Connect process. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseHistoryKafkaBootstrapServers
- the value to set- Returns:
- the dsl builder
-
databaseHistoryKafkaQueryTimeoutMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistoryKafkaQueryTimeoutMs(long databaseHistoryKafkaQueryTimeoutMs)
The number of milliseconds to wait while fetching cluster information using Kafka admin client. The option is a: <code>long</code> type. Default: 3s Group: mysql- Parameters:
databaseHistoryKafkaQueryTimeoutMs
- the value to set- Returns:
- the dsl builder
-
databaseHistoryKafkaRecoveryAttempts
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistoryKafkaRecoveryAttempts(int databaseHistoryKafkaRecoveryAttempts)
The number of attempts in a row that no data are returned from Kafka before recover completes. The maximum amount of time to wait after receiving no data is (recovery.attempts) x (recovery.poll.interval.ms). The option is a: <code>int</code> type. Default: 100 Group: mysql- Parameters:
databaseHistoryKafkaRecoveryAttempts
- the value to set- Returns:
- the dsl builder
-
databaseHistoryKafkaRecoveryPollIntervalMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistoryKafkaRecoveryPollIntervalMs(int databaseHistoryKafkaRecoveryPollIntervalMs)
The number of milliseconds to wait while polling for persisted data during recovery. The option is a: <code>int</code> type. Default: 100ms Group: mysql- Parameters:
databaseHistoryKafkaRecoveryPollIntervalMs
- the value to set- Returns:
- the dsl builder
-
databaseHistoryKafkaTopic
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistoryKafkaTopic(String databaseHistoryKafkaTopic)
The name of the topic for the database schema history. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseHistoryKafkaTopic
- the value to set- Returns:
- the dsl builder
-
databaseHistorySkipUnparseableDdl
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistorySkipUnparseableDdl(boolean databaseHistorySkipUnparseableDdl)
Controls the action Debezium will take when it meets a DDL statement in binlog, that it cannot parse.By default the connector will stop operating but by changing the setting it can ignore the statements which it cannot parse. If skipping is enabled then Debezium can miss metadata changes. The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
databaseHistorySkipUnparseableDdl
- the value to set- Returns:
- the dsl builder
-
databaseHistoryStoreOnlyCapturedTablesDdl
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistoryStoreOnlyCapturedTablesDdl(boolean databaseHistoryStoreOnlyCapturedTablesDdl)
Controls what DDL will Debezium store in database history. By default (false) Debezium will store all incoming DDL statements. If set to true, then only DDL that manipulates a captured table will be stored. The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
databaseHistoryStoreOnlyCapturedTablesDdl
- the value to set- Returns:
- the dsl builder
-
databaseHistoryStoreOnlyMonitoredTablesDdl
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHistoryStoreOnlyMonitoredTablesDdl(boolean databaseHistoryStoreOnlyMonitoredTablesDdl)
Controls what DDL will Debezium store in database history. By default (false) Debezium will store all incoming DDL statements. If set to true, then only DDL that manipulates a monitored table will be stored (deprecated, use database.history.store.only.captured.tables.ddl instead). The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
databaseHistoryStoreOnlyMonitoredTablesDdl
- the value to set- Returns:
- the dsl builder
-
databaseHostname
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseHostname(String databaseHostname)
Resolvable hostname or IP address of the database server. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseHostname
- the value to set- Returns:
- the dsl builder
-
databaseIncludeList
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseIncludeList(String databaseIncludeList)
The databases for which changes are to be captured. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseIncludeList
- the value to set- Returns:
- the dsl builder
-
databaseInitialStatements
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseInitialStatements(String databaseInitialStatements)
A semicolon separated list of SQL statements to be executed when a JDBC connection (not binlog reading connection) to the database is established. Note that the connector may establish JDBC connections at its own discretion, so this should typically be used for configuration of session parameters only,but not for executing DML statements. Use doubled semicolon (';;') to use a semicolon as a character and not as a delimiter. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseInitialStatements
- the value to set- Returns:
- the dsl builder
-
databaseJdbcDriver
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseJdbcDriver(String databaseJdbcDriver)
JDBC Driver class name used to connect to the MySQL database server. The option is a: <code>java.lang.String</code> type. Default: com.mysql.cj.jdbc.Driver Group: mysql- Parameters:
databaseJdbcDriver
- the value to set- Returns:
- the dsl builder
-
databasePassword
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databasePassword(String databasePassword)
Password of the database user to be used when connecting to the database. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databasePassword
- the value to set- Returns:
- the dsl builder
-
databasePort
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databasePort(int databasePort)
Port of the database server. The option is a: <code>int</code> type. Default: 3306 Group: mysql- Parameters:
databasePort
- the value to set- Returns:
- the dsl builder
-
databaseServerId
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseServerId(long databaseServerId)
A numeric ID of this database client, which must be unique across all currently-running database processes in the cluster. This connector joins the MySQL database cluster as another server (with this unique ID) so it can read the binlog. By default, a random number is generated between 5400 and 6400. The option is a: <code>long</code> type. Group: mysql- Parameters:
databaseServerId
- the value to set- Returns:
- the dsl builder
-
databaseServerIdOffset
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseServerIdOffset(long databaseServerIdOffset)
Only relevant if parallel snapshotting is configured. During parallel snapshotting, multiple (4) connections open to the database client, and they each need their own unique connection ID. This offset is used to generate those IDs from the base configured cluster ID. The option is a: <code>long</code> type. Default: 10000 Group: mysql- Parameters:
databaseServerIdOffset
- the value to set- Returns:
- the dsl builder
-
databaseServerName
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseServerName(String databaseServerName)
Unique name that identifies the database server and all recorded offsets, and that is used as a prefix for all schemas and topics. Each distinct installation should have a separate namespace and be monitored by at most one Debezium connector. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseServerName
- the value to set- Returns:
- the dsl builder
-
databaseSslKeystore
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseSslKeystore(String databaseSslKeystore)
The location of the key store file. This is optional and can be used for two-way authentication between the client and the MySQL Server. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseSslKeystore
- the value to set- Returns:
- the dsl builder
-
databaseSslKeystorePassword
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseSslKeystorePassword(String databaseSslKeystorePassword)
The password for the key store file. This is optional and only needed if 'database.ssl.keystore' is configured. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseSslKeystorePassword
- the value to set- Returns:
- the dsl builder
-
databaseSslMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseSslMode(String databaseSslMode)
Whether to use an encrypted connection to MySQL. Options include'disabled' (the default) to use an unencrypted connection; 'preferred' to establish a secure (encrypted) connection if the server supports secure connections, but fall back to an unencrypted connection otherwise; 'required' to use a secure (encrypted) connection, and fail if one cannot be established; 'verify_ca' like 'required' but additionally verify the server TLS certificate against the configured Certificate Authority (CA) certificates, or fail if no valid matching CA certificates are found; or'verify_identity' like 'verify_ca' but additionally verify that the server certificate matches the host to which the connection is attempted. The option is a: <code>java.lang.String</code> type. Default: disabled Group: mysql- Parameters:
databaseSslMode
- the value to set- Returns:
- the dsl builder
-
databaseSslTruststore
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseSslTruststore(String databaseSslTruststore)
The location of the trust store file for the server certificate verification. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseSslTruststore
- the value to set- Returns:
- the dsl builder
-
databaseSslTruststorePassword
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseSslTruststorePassword(String databaseSslTruststorePassword)
The password for the trust store file. Used to check the integrity of the truststore, and unlock the truststore. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseSslTruststorePassword
- the value to set- Returns:
- the dsl builder
-
databaseUser
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder databaseUser(String databaseUser)
Name of the database user to be used when connecting to the database. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
databaseUser
- the value to set- Returns:
- the dsl builder
-
datatypePropagateSourceType
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder datatypePropagateSourceType(String datatypePropagateSourceType)
A comma-separated list of regular expressions matching the database-specific data type names that adds the data type's original type and original length as parameters to the corresponding field schemas in the emitted change records. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
datatypePropagateSourceType
- the value to set- Returns:
- the dsl builder
-
decimalHandlingMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder decimalHandlingMode(String decimalHandlingMode)
Specify how DECIMAL and NUMERIC columns should be represented in change events, including:'precise' (the default) uses java.math.BigDecimal to represent values, which are encoded in the change events using a binary representation and Kafka Connect's 'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent values; 'double' represents values using Java's 'double', which may not offer the precision but will be far easier to use in consumers. The option is a: <code>java.lang.String</code> type. Default: precise Group: mysql- Parameters:
decimalHandlingMode
- the value to set- Returns:
- the dsl builder
-
enableTimeAdjuster
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder enableTimeAdjuster(boolean enableTimeAdjuster)
MySQL allows user to insert year value as either 2-digit or 4-digit. In case of two digit the value is automatically mapped into 1970 - 2069.false - delegates the implicit conversion to the databasetrue - (the default) Debezium makes the conversion. The option is a: <code>boolean</code> type. Default: true Group: mysql- Parameters:
enableTimeAdjuster
- the value to set- Returns:
- the dsl builder
-
eventDeserializationFailureHandlingMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder eventDeserializationFailureHandlingMode(String eventDeserializationFailureHandlingMode)
Specify how failures during deserialization of binlog events (i.e. when encountering a corrupted event) should be handled, including:'fail' (the default) an exception indicating the problematic event and its binlog position is raised, causing the connector to be stopped; 'warn' the problematic event and its binlog position will be logged and the event will be skipped;'ignore' the problematic event will be skipped. The option is a: <code>java.lang.String</code> type. Default: fail Group: mysql- Parameters:
eventDeserializationFailureHandlingMode
- the value to set- Returns:
- the dsl builder
-
eventProcessingFailureHandlingMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder eventProcessingFailureHandlingMode(String eventProcessingFailureHandlingMode)
Specify how failures during processing of events (i.e. when encountering a corrupted event) should be handled, including:'fail' (the default) an exception indicating the problematic event and its position is raised, causing the connector to be stopped; 'warn' the problematic event and its position will be logged and the event will be skipped;'ignore' the problematic event will be skipped. The option is a: <code>java.lang.String</code> type. Default: fail Group: mysql- Parameters:
eventProcessingFailureHandlingMode
- the value to set- Returns:
- the dsl builder
-
gtidSourceExcludes
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder gtidSourceExcludes(String gtidSourceExcludes)
The source UUIDs used to exclude GTID ranges when determine the starting position in the MySQL server's binlog. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
gtidSourceExcludes
- the value to set- Returns:
- the dsl builder
-
gtidSourceFilterDmlEvents
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder gtidSourceFilterDmlEvents(boolean gtidSourceFilterDmlEvents)
If set to true, we will only produce DML events into Kafka for transactions that were written on mysql servers with UUIDs matching the filters defined by the gtid.source.includes or gtid.source.excludes configuration options, if they are specified. The option is a: <code>boolean</code> type. Default: true Group: mysql- Parameters:
gtidSourceFilterDmlEvents
- the value to set- Returns:
- the dsl builder
-
gtidSourceIncludes
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder gtidSourceIncludes(String gtidSourceIncludes)
The source UUIDs used to include GTID ranges when determine the starting position in the MySQL server's binlog. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
gtidSourceIncludes
- the value to set- Returns:
- the dsl builder
-
heartbeatActionQuery
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder heartbeatActionQuery(String heartbeatActionQuery)
The query executed with every heartbeat. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
heartbeatActionQuery
- the value to set- Returns:
- the dsl builder
-
heartbeatIntervalMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder heartbeatIntervalMs(int heartbeatIntervalMs)
Length of an interval in milli-seconds in in which the connector periodically sends heartbeat messages to a heartbeat topic. Use 0 to disable heartbeat messages. Disabled by default. The option is a: <code>int</code> type. Default: 0ms Group: mysql- Parameters:
heartbeatIntervalMs
- the value to set- Returns:
- the dsl builder
-
heartbeatTopicsPrefix
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder heartbeatTopicsPrefix(String heartbeatTopicsPrefix)
The prefix that is used to name heartbeat topics.Defaults to __debezium-heartbeat. The option is a: <code>java.lang.String</code> type. Default: __debezium-heartbeat Group: mysql- Parameters:
heartbeatTopicsPrefix
- the value to set- Returns:
- the dsl builder
-
includeQuery
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder includeQuery(boolean includeQuery)
Whether the connector should include the original SQL query that generated the change event. Note: This option requires MySQL be configured with the binlog_rows_query_log_events option set to ON. Query will not be present for events generated from snapshot. WARNING: Enabling this option may expose tables or fields explicitly blacklisted or masked by including the original SQL statement in the change event. For this reason the default value is 'false'. The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
includeQuery
- the value to set- Returns:
- the dsl builder
-
includeSchemaChanges
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder includeSchemaChanges(boolean includeSchemaChanges)
Whether the connector should publish changes in the database schema to a Kafka topic with the same name as the database server ID. Each schema change will be recorded using a key that contains the database name and whose value include logical description of the new schema and optionally the DDL statement(s).The default is 'true'. This is independent of how the connector internally records database history. The option is a: <code>boolean</code> type. Default: true Group: mysql- Parameters:
includeSchemaChanges
- the value to set- Returns:
- the dsl builder
-
includeSchemaComments
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder includeSchemaComments(boolean includeSchemaComments)
Whether the connector parse table and column's comment to metadata object.Note: Enable this option will bring the implications on memory usage. The number and size of ColumnImpl objects is what largely impacts how much memory is consumed by the Debezium connectors, and adding a String to each of them can potentially be quite heavy. The default is 'false'. The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
includeSchemaComments
- the value to set- Returns:
- the dsl builder
-
inconsistentSchemaHandlingMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder inconsistentSchemaHandlingMode(String inconsistentSchemaHandlingMode)
Specify how binlog events that belong to a table missing from internal schema representation (i.e. internal representation is not consistent with database) should be handled, including:'fail' (the default) an exception indicating the problematic event and its binlog position is raised, causing the connector to be stopped; 'warn' the problematic event and its binlog position will be logged and the event will be skipped;'skip' the problematic event will be skipped. The option is a: <code>java.lang.String</code> type. Default: fail Group: mysql- Parameters:
inconsistentSchemaHandlingMode
- the value to set- Returns:
- the dsl builder
-
incrementalSnapshotAllowSchemaChanges
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder incrementalSnapshotAllowSchemaChanges(boolean incrementalSnapshotAllowSchemaChanges)
Detect schema change during an incremental snapshot and re-select a current chunk to avoid locking DDLs. Note that changes to a primary key are not supported and can cause incorrect results if performed during an incremental snapshot. Another limitation is that if a schema change affects only columns' default values, then the change won't be detected until the DDL is processed from the binlog stream. This doesn't affect the snapshot events' values, but the schema of snapshot events may have outdated defaults. The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
incrementalSnapshotAllowSchemaChanges
- the value to set- Returns:
- the dsl builder
-
incrementalSnapshotChunkSize
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder incrementalSnapshotChunkSize(int incrementalSnapshotChunkSize)
The maximum size of chunk for incremental snapshotting. The option is a: <code>int</code> type. Default: 1024 Group: mysql- Parameters:
incrementalSnapshotChunkSize
- the value to set- Returns:
- the dsl builder
-
maxBatchSize
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder maxBatchSize(int maxBatchSize)
Maximum size of each batch of source records. Defaults to 2048. The option is a: <code>int</code> type. Default: 2048 Group: mysql- Parameters:
maxBatchSize
- the value to set- Returns:
- the dsl builder
-
maxQueueSize
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder maxQueueSize(int maxQueueSize)
Maximum size of the queue for change events read from the database log but not yet recorded or forwarded. Defaults to 8192, and should always be larger than the maximum batch size. The option is a: <code>int</code> type. Default: 8192 Group: mysql- Parameters:
maxQueueSize
- the value to set- Returns:
- the dsl builder
-
maxQueueSizeInBytes
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder maxQueueSizeInBytes(long maxQueueSizeInBytes)
Maximum size of the queue in bytes for change events read from the database log but not yet recorded or forwarded. Defaults to 0. Mean the feature is not enabled. The option is a: <code>long</code> type. Default: 0 Group: mysql- Parameters:
maxQueueSizeInBytes
- the value to set- Returns:
- the dsl builder
-
messageKeyColumns
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder messageKeyColumns(String messageKeyColumns)
A semicolon-separated list of expressions that match fully-qualified tables and column(s) to be used as message key. Each expression must match the pattern ':',where the table names could be defined as (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific connector,and the key columns are a comma-separated list of columns representing the custom key. For any table without an explicit key configuration the table's primary key column(s) will be used as message key.Example: dbserver1.inventory.orderlines:orderId,orderLineId;dbserver1.inventory.orders:id. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
messageKeyColumns
- the value to set- Returns:
- the dsl builder
-
minRowCountToStreamResults
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder minRowCountToStreamResults(int minRowCountToStreamResults)
The number of rows a table must contain to stream results rather than pull all into memory during snapshots. Defaults to 1,000. Use 0 to stream all results and completely avoid checking the size of each table. The option is a: <code>int</code> type. Default: 1000 Group: mysql- Parameters:
minRowCountToStreamResults
- the value to set- Returns:
- the dsl builder
-
pollIntervalMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder pollIntervalMs(long pollIntervalMs)
Time to wait for new change events to appear after receiving no events, given in milliseconds. Defaults to 500 ms. The option is a: <code>long</code> type. Default: 500ms Group: mysql- Parameters:
pollIntervalMs
- the value to set- Returns:
- the dsl builder
-
provideTransactionMetadata
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder provideTransactionMetadata(boolean provideTransactionMetadata)
Enables transaction metadata extraction together with event counting. The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
provideTransactionMetadata
- the value to set- Returns:
- the dsl builder
-
queryFetchSize
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder queryFetchSize(int queryFetchSize)
The maximum number of records that should be loaded into memory while streaming. A value of 0 uses the default JDBC fetch size. The option is a: <code>int</code> type. Default: 0 Group: mysql- Parameters:
queryFetchSize
- the value to set- Returns:
- the dsl builder
-
retriableRestartConnectorWaitMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder retriableRestartConnectorWaitMs(long retriableRestartConnectorWaitMs)
Time to wait before restarting connector after retriable exception occurs. Defaults to 10000ms. The option is a: <code>long</code> type. Default: 10s Group: mysql- Parameters:
retriableRestartConnectorWaitMs
- the value to set- Returns:
- the dsl builder
-
sanitizeFieldNames
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder sanitizeFieldNames(boolean sanitizeFieldNames)
Whether field names will be sanitized to Avro naming conventions. The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
sanitizeFieldNames
- the value to set- Returns:
- the dsl builder
-
schemaNameAdjustmentMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder schemaNameAdjustmentMode(String schemaNameAdjustmentMode)
Specify how schema names should be adjusted for compatibility with the message converter used by the connector, including:'avro' replaces the characters that cannot be used in the Avro type name with underscore (default)'none' does not apply any adjustment. The option is a: <code>java.lang.String</code> type. Default: avro Group: mysql- Parameters:
schemaNameAdjustmentMode
- the value to set- Returns:
- the dsl builder
-
signalDataCollection
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder signalDataCollection(String signalDataCollection)
The name of the data collection that is used to send signals/commands to Debezium. Signaling is disabled when not set. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
signalDataCollection
- the value to set- Returns:
- the dsl builder
-
skippedOperations
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder skippedOperations(String skippedOperations)
The comma-separated list of operations to skip during streaming, defined as: 'c' for inserts/create; 'u' for updates; 'd' for deletes, 't' for truncates, and 'none' to indicate nothing skipped. By default, no operations will be skipped. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
skippedOperations
- the value to set- Returns:
- the dsl builder
-
snapshotDelayMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotDelayMs(long snapshotDelayMs)
A delay period before a snapshot will begin, given in milliseconds. Defaults to 0 ms. The option is a: <code>long</code> type. Default: 0ms Group: mysql- Parameters:
snapshotDelayMs
- the value to set- Returns:
- the dsl builder
-
snapshotFetchSize
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotFetchSize(int snapshotFetchSize)
The maximum number of records that should be loaded into memory while performing a snapshot. The option is a: <code>int</code> type. Group: mysql- Parameters:
snapshotFetchSize
- the value to set- Returns:
- the dsl builder
-
snapshotIncludeCollectionList
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotIncludeCollectionList(String snapshotIncludeCollectionList)
this setting must be set to specify a list of tables/collections whose snapshot must be taken on creating or restarting the connector. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
snapshotIncludeCollectionList
- the value to set- Returns:
- the dsl builder
-
snapshotLockingMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotLockingMode(String snapshotLockingMode)
Controls how long the connector holds onto the global read lock while it is performing a snapshot. The default is 'minimal', which means the connector holds the global read lock (and thus prevents any updates) for just the initial portion of the snapshot while the database schemas and other metadata are being read. The remaining work in a snapshot involves selecting all rows from each table, and this can be done using the snapshot process' REPEATABLE READ transaction even when the lock is no longer held and other operations are updating the database. However, in some cases it may be desirable to block all writes for the entire duration of the snapshot; in such cases set this property to 'extended'. Using a value of 'none' will prevent the connector from acquiring any table locks during the snapshot process. This mode can only be used in combination with snapshot.mode values of 'schema_only' or 'schema_only_recovery' and is only safe to use if no schema changes are happening while the snapshot is taken. The option is a: <code>java.lang.String</code> type. Default: minimal Group: mysql- Parameters:
snapshotLockingMode
- the value to set- Returns:
- the dsl builder
-
snapshotLockTimeoutMs
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotLockTimeoutMs(long snapshotLockTimeoutMs)
The maximum number of millis to wait for table locks at the beginning of a snapshot. If locks cannot be acquired in this time frame, the snapshot will be aborted. Defaults to 10 seconds. The option is a: <code>long</code> type. Default: 10s Group: mysql- Parameters:
snapshotLockTimeoutMs
- the value to set- Returns:
- the dsl builder
-
snapshotMaxThreads
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotMaxThreads(int snapshotMaxThreads)
The maximum number of threads used to perform the snapshot. Defaults to 1. The option is a: <code>int</code> type. Default: 1 Group: mysql- Parameters:
snapshotMaxThreads
- the value to set- Returns:
- the dsl builder
-
snapshotMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotMode(String snapshotMode)
The criteria for running a snapshot upon startup of the connector. Options include: 'when_needed' to specify that the connector run a snapshot upon startup whenever it deems it necessary; 'schema_only' to only take a snapshot of the schema (table structures) but no actual data; 'initial' (the default) to specify the connector can run a snapshot only when no offsets are available for the logical server name; 'initial_only' same as 'initial' except the connector should stop after completing the snapshot and before it would normally read the binlog; and'never' to specify the connector should never run a snapshot and that upon first startup the connector should read from the beginning of the binlog. The 'never' mode should be used with care, and only when the binlog is known to contain all history. The option is a: <code>java.lang.String</code> type. Default: initial Group: mysql- Parameters:
snapshotMode
- the value to set- Returns:
- the dsl builder
-
snapshotNewTables
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotNewTables(String snapshotNewTables)
BETA FEATURE: On connector restart, the connector will check if there have been any new tables added to the configuration, and snapshot them. There is presently only two options:'off': Default behavior. Do not snapshot new tables.'parallel': The snapshot of the new tables will occur in parallel to the continued binlog reading of the old tables. When the snapshot completes, an independent binlog reader will begin reading the events for the new tables until it catches up to present time. At this point, both old and new binlog readers will be momentarily halted and new binlog reader will start that will read the binlog for all configured tables. The parallel binlog reader will have a configured server id of 10000 the primary binlog reader's server id. The option is a: <code>java.lang.String</code> type. Default: off Group: mysql- Parameters:
snapshotNewTables
- the value to set- Returns:
- the dsl builder
-
snapshotSelectStatementOverrides
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder snapshotSelectStatementOverrides(String snapshotSelectStatementOverrides)
This property contains a comma-separated list of fully-qualified tables (DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on thespecific connectors. Select statements for the individual tables are specified in further configuration properties, one for each table, identified by the id 'snapshot.select.statement.overrides.DB_NAME.TABLE_NAME' or 'snapshot.select.statement.overrides.SCHEMA_NAME.TABLE_NAME', respectively. The value of those properties is the select statement to use when retrieving data from the specific table during snapshotting. A possible use case for large append-only tables is setting a specific point where to start (resume) snapshotting, in case a previous snapshotting was interrupted. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
snapshotSelectStatementOverrides
- the value to set- Returns:
- the dsl builder
-
sourceStructVersion
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder sourceStructVersion(String sourceStructVersion)
A version of the format of the publicly visible source part in the message. The option is a: <code>java.lang.String</code> type. Default: v2 Group: mysql- Parameters:
sourceStructVersion
- the value to set- Returns:
- the dsl builder
-
tableBlacklist
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder tableBlacklist(String tableBlacklist)
A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring (deprecated, use table.exclude.list instead). The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
tableBlacklist
- the value to set- Returns:
- the dsl builder
-
tableExcludeList
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder tableExcludeList(String tableExcludeList)
A comma-separated list of regular expressions that match the fully-qualified names of tables to be excluded from monitoring. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
tableExcludeList
- the value to set- Returns:
- the dsl builder
-
tableIgnoreBuiltin
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder tableIgnoreBuiltin(boolean tableIgnoreBuiltin)
Flag specifying whether built-in tables should be ignored. The option is a: <code>boolean</code> type. Default: true Group: mysql- Parameters:
tableIgnoreBuiltin
- the value to set- Returns:
- the dsl builder
-
tableIncludeList
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder tableIncludeList(String tableIncludeList)
The tables for which changes are to be captured. The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
tableIncludeList
- the value to set- Returns:
- the dsl builder
-
tableWhitelist
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder tableWhitelist(String tableWhitelist)
The tables for which changes are to be captured (deprecated, use table.include.list instead). The option is a: <code>java.lang.String</code> type. Group: mysql- Parameters:
tableWhitelist
- the value to set- Returns:
- the dsl builder
-
timePrecisionMode
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder timePrecisionMode(String timePrecisionMode)
Time, date and timestamps can be represented with different kinds of precisions, including:'adaptive_time_microseconds': the precision of date and timestamp values is based the database column's precision; but time fields always use microseconds precision;'connect': always represents time, date and timestamp values using Kafka Connect's built-in representations for Time, Date, and Timestamp, which uses millisecond precision regardless of the database columns' precision. The option is a: <code>java.lang.String</code> type. Default: adaptive_time_microseconds Group: mysql- Parameters:
timePrecisionMode
- the value to set- Returns:
- the dsl builder
-
tombstonesOnDelete
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder tombstonesOnDelete(boolean tombstonesOnDelete)
Whether delete operations should be represented by a delete event and a subsquenttombstone event (true) or only by a delete event (false). Emitting the tombstone event (the default behavior) allows Kafka to completely delete all events pertaining to the given key once the source record got deleted. The option is a: <code>boolean</code> type. Default: false Group: mysql- Parameters:
tombstonesOnDelete
- the value to set- Returns:
- the dsl builder
-
transactionTopic
default DebeziumMysqlComponentBuilderFactory.DebeziumMysqlComponentBuilder transactionTopic(String transactionTopic)
The name of the transaction metadata topic. The placeholder ${database.server.name} can be used for referring to the connector's logical name; defaults to ${database.server.name}.transaction. The option is a: <code>java.lang.String</code> type. Default: ${database.server.name}.transaction Group: mysql- Parameters:
transactionTopic
- the value to set- Returns:
- the dsl builder
-
-