org.apache.camel.impl
Class DefaultCamelContext

java.lang.Object
  org.apache.camel.impl.ServiceSupport
      org.apache.camel.impl.DefaultCamelContext

All Implemented Interfaces:

CamelContext, RuntimeConfiguration, Service

public class DefaultCamelContext
extends ServiceSupport
implements CamelContext

Represents the context used to configure routes and the policies to use.

Version:

$Revision: 881804 $

Constructor Summary

DefaultCamelContext()

DefaultCamelContext(Context jndiContext)
Creates the CamelContext using the given JNDI context as the registry

DefaultCamelContext(Registry registry)
Creates the CamelContext using the given registry

Method Summary

void	addComponent(String componentName, Component component) Adds a component to the context.
Endpoint	addEndpoint(String uri, Endpoint endpoint) Adds the endpoint to the context using the given URI.
protected Endpoint	addEndpointToRegistry(String uri, Endpoint endpoint) Strategy to add the given endpoint to the internal endpoint registry
void	addInterceptStrategy(InterceptStrategy interceptStrategy) Adds the given interceptor strategy
void	addLifecycleStrategy(LifecycleStrategy lifecycleStrategy) Adds the given lifecycle strategy to be used.
void	addRegisterEndpointCallback(EndpointStrategy strategy) Registers a callback to allow you to do custom logic when an Endpoint is about to be registered to the CamelContext endpoint registry.
void	addRouteDefinitions(Collection<RouteDefinition> routeDefinitions) Adds a collection of route definitions to the context
void	addRoutes(RoutesBuilder builder) Adds a collection of routes to this context using the given builder to build them
void	addService(Object object) Adds a service, starting it so that it will be stopped with this context
protected Endpoint	convertBeanToEndpoint(String uri, Object bean) Strategy method for attempting to convert the bean from a Registry to an endpoint using some kind of transformation or wrapper
protected ComponentResolver	createComponentResolver() Lazily create a default implementation
ConsumerTemplate	createConsumerTemplate() Creates a new ConsumerTemplate.
protected Endpoint	createEndpoint(String uri) A pluggable strategy to allow an endpoint to be created without requiring a component to be its factory, such as for looking up the URI inside some Registry
protected Injector	createInjector() Lazily create a default implementation
protected ManagementStrategy	createManagementStrategy()
ProducerTemplate	createProducerTemplate() Creates a new ProducerTemplate.
protected Registry	createRegistry() Lazily create a default implementation
protected TypeConverter	createTypeConverter() Lazily create a default implementation
void	disableJMX() Disables using JMX as ManagementStrategy.
protected void	doStart()
protected void	doStop()
protected void	forceLazyInitialization() Lets force some lazy initialization to occur upfront before we start any components and create routes
ClassLoader	getApplicationContextClassLoader() Gets the the application context class loader which may be helpful for running camel in other containers
ClassResolver	getClassResolver() Returns the class resolver to be used for loading/lookup of classes.
Component	getComponent(String name) Gets a component from the context by name.
<T extends Component> T	getComponent(String name, Class<T> componentType) Gets a component from the context by name and specifying the expected type of component.
List<String>	getComponentNames() Gets a readonly list of names of the components currently registered
ComponentResolver	getComponentResolver()
DataFormatResolver	getDataFormatResolver()
Map<String,DataFormatDefinition>	getDataFormats() Gets the data formats that can be referenced in the routes.
FactoryFinder	getDefaultFactoryFinder() Gets the default FactoryFinder which will be used for the loading the factory class from META-INF
InterceptStrategy	getDefaultTracer() Gets the default tracer
Long	getDelayer() Gets the delay value
Endpoint	getEndpoint(String uri) Resolves the given name to an Endpoint of the specified type.
<T extends Endpoint> T	getEndpoint(String name, Class<T> endpointType) Resolves the given name to an Endpoint of the specified type.
protected String	getEndpointKey(String uri, Endpoint endpoint)
Map<String,Endpoint>	getEndpointMap() Returns a new Map containing all of the active endpoints with the key of the map being their unique key.
Collection<Endpoint>	getEndpoints() Returns the collection of all registered endpoints.
Collection<Endpoint>	getEndpoints(String uri) Returns the collection of all registered endpoints for a uri or an empty collection.
ErrorHandlerBuilder	getErrorHandlerBuilder() Gets the default error handler builder which is inherited by the routes
FactoryFinder	getFactoryFinder(String path) Gets the FactoryFinder which will be used for the loading the factory class from META-INF in the given path
InflightRepository	getInflightRepository() Gets the inflight repository
Injector	getInjector() Returns the injector used to instantiate objects by type
List<InterceptStrategy>	getInterceptStrategies() Gets the interceptor strategies
List<String>	getLanguageNames() Gets a readonly list with the names of the languages currently registered.
LanguageResolver	getLanguageResolver()
List<LifecycleStrategy>	getLifecycleStrategies() Returns the lifecycle strategies used to handle lifecycle notifications
ManagementStrategy	getManagementStrategy() Gets the management strategy
String	getName() Gets the name of the this context.
NodeIdFactory	getNodeIdFactory() Gets the node id factory
Component	getOrCreateComponent(String componentName, Callable<Component> factory) Gets the a previously added component by name or lazily creates the component using the factory Callback.
PackageScanClassResolver	getPackageScanClassResolver() Returns the package scanning class resolver
ServicePool<Endpoint,Producer>	getProducerServicePool() Gets the service pool for Producer pooling.
Map<String,String>	getProperties() Gets the properties that can be referenced in the camel context
Registry	getRegistry() Returns the registry used to lookup components by name and type such as the Spring ApplicationContext, JNDI or the OSGi Service Registry
RouteDefinition	getRouteDefinition(String id) Gets the route definition with the given id
List<RouteDefinition>	getRouteDefinitions() Returns a list of the current route definitions
List<Route>	getRoutes() Returns the current routes in this context
protected Map<String,RouteService>	getRouteServices()
List<Consumer>	getRouteStartupOrder() Returns the order in which the route inputs was started.
ServiceStatus	getRouteStatus(RouteDefinition route) Returns the current status of the given route
ServiceStatus	getRouteStatus(String key) Returns the current status of the given route
Collection<Endpoint>	getSingletonEndpoints() Returns the collection of all registered singleton endpoints.
TypeConverter	getTypeConverter() Returns the type converter used to coerce types from one type to another
TypeConverterRegistry	getTypeConverterRegistry() Returns the type converter registry where type converters can be added or looked up
Component	hasComponent(String componentName) Is the given component already registered?
Endpoint	hasEndpoint(String uri) Is the given endpoint already registered?
boolean	hasService(Object object) Has the given service already been added?
boolean	isAutoCreateComponents()
boolean	isAutoStartup() Gets whether it should automatic start when Camel starts.
boolean	isHandleFault() Returns whether tracing enabled
boolean	isStreamCaching() Returns whether stream cache is enabled
boolean	isTracing() Returns whether tracing enabled
Component	removeComponent(String componentName) Deprecated.
Collection<Endpoint>	removeEndpoints(String uri) Removes all endpoints with the given URI
void	removeRouteDefinition(RouteDefinition routeDefinition)
boolean	removeRouteDefinition(String key) Removes the route definition with the given key.
void	removeRouteDefinitions(Collection<RouteDefinition> routeDefinitions) Removes a collection of route definitions from the context - stopping any previously running routes if any of them are actively running
DataFormat	resolveDataFormat(String name) Resolve a data format given its name
DataFormatDefinition	resolveDataFormatDefinition(String name) Resolve a data format definition given its name
Language	resolveLanguage(String language) Resolves a language for creating expressions
void	setApplicationContextClassLoader(ClassLoader classLoader) Sets the application context class loader
void	setAutoCreateComponents(boolean autoCreateComponents)
void	setAutoStartup(Boolean autoStartup) Sets whether it should automatic start when Camel starts.
void	setClassResolver(ClassResolver classResolver) Sets the class resolver to be use
void	setComponentResolver(ComponentResolver componentResolver)
void	setDataFormatResolver(DataFormatResolver dataFormatResolver)
void	setDataFormats(Map<String,DataFormatDefinition> dataFormats) Sets the data formats that can be referenced in the routes.
void	setDelayer(long delay) Sets a delay value in millis that a message is delayed at every step it takes in the route path, to slow things down to better helps you to see what goes Is disabled by default
void	setErrorHandlerBuilder(ErrorHandlerBuilder errorHandlerBuilder) Sets the default error handler builder which is inherited by the routes
void	setFactoryFinderResolver(FactoryFinderResolver resolver) Sets the factory finder resolver to use.
void	setHandleFault(Boolean handleFault) Sets whether handle fault is enabled or not (default is disabled).
void	setInflightRepository(InflightRepository repository) Sets a custom inflight repository to use
void	setInjector(Injector injector)
void	setInterceptStrategies(List<InterceptStrategy> interceptStrategies)
void	setJndiContext(Context jndiContext) Sets the registry to the given JNDI context
void	setLanguageResolver(LanguageResolver languageResolver)
void	setLifecycleStrategies(List<LifecycleStrategy> lifecycleStrategies)
void	setManagementStrategy(ManagementStrategy managementStrategy) Sets the management strategy to use
void	setName(String name) Sets the name of the this context.
void	setNodeIdFactory(NodeIdFactory idFactory) Uses a custom node id factory when generating auto assigned ids to the nodes in the route definitions
void	setPackageScanClassResolver(PackageScanClassResolver packageScanClassResolver) Sets the package scanning class resolver to use
void	setProducerServicePool(ServicePool<Endpoint,Producer> producerServicePool) Sets a pluggable service pool to use for Producer pooling.
void	setProperties(Map<String,String> properties) Sets the properties that can be referenced in the camel context
void	setRegistry(Registry registry)
void	setRoutes(List<Route> routes)
void	setStreamCaching(Boolean cache) Sets whether stream caching is enabled or not (default is disabled).
void	setTracing(Boolean tracing) Sets whether tracing is enabled or not (default is disabled).
void	setTypeConverter(TypeConverter typeConverter)
void	setTypeConverterRegistry(TypeConverterRegistry typeConverterRegistry)
protected boolean	shouldStartRoutes() Should we start newly added routes?
void	start() Starts the service
void	startRoute(RouteDefinition route) Starts the given route if it has been previously stopped
void	startRoute(String routeId) Starts the given route if it has been previously stopped
protected void	startRouteDefinitions(Collection<RouteDefinition> list)
protected void	startRouteService(RouteService routeService) Starts the given route service
void	stopRoute(RouteDefinition route) Stops the given route.
void	stopRoute(String key) Stops the route denoted by the given RouteType id
String	toString()

Methods inherited from class org.apache.camel.impl.ServiceSupport

addChildService, getStatus, getVersion, isRunAllowed, isStarted, isStarting, isStopped, isStopping, removeChildService, stop

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface org.apache.camel.CamelContext

getVersion

Methods inherited from interface org.apache.camel.Service

stop

Constructor Detail

DefaultCamelContext

public DefaultCamelContext()

DefaultCamelContext

public DefaultCamelContext(Context jndiContext)

Creates the CamelContext using the given JNDI context as the registry

DefaultCamelContext

public DefaultCamelContext(Registry registry)

Creates the CamelContext using the given registry

Method Detail

getName

public String getName()

Description copied from interface: CamelContext

Gets the name of the this context.

Specified by:

getName in interface CamelContext

Returns:

the name

setName

public void setName(String name)

Sets the name of the this context.

hasComponent

public Component hasComponent(String componentName)

Description copied from interface: CamelContext

Is the given component already registered?

Specified by:

hasComponent in interface CamelContext

Parameters:

componentName - the name of the component

Returns:

the registered Component or null if not registered

addComponent

public void addComponent(String componentName,
                         Component component)

Description copied from interface: CamelContext

Adds a component to the context.

Specified by:

addComponent in interface CamelContext

Parameters:

componentName - the name the component is registered as

component - the component

getComponent

public Component getComponent(String name)

Description copied from interface: CamelContext

Gets a component from the context by name.

Specified by:

getComponent in interface CamelContext

Parameters:

name - the name of the component

Returns:

the component

getComponent

public <T extends Component> T getComponent(String name,
                                            Class<T> componentType)

Description copied from interface: CamelContext

Gets a component from the context by name and specifying the expected type of component.

Specified by:

getComponent in interface CamelContext

Parameters:

name - the name to lookup

componentType - the expected type

Returns:

the component

removeComponent

@Deprecated
public Component removeComponent(String componentName)

Deprecated.

Description copied from interface: CamelContext

Removes a previously added component.

Specified by:

removeComponent in interface CamelContext

Parameters:

componentName - the component name to remove

Returns:

the previously added component or null if it had not been previously added.

getOrCreateComponent

public Component getOrCreateComponent(String componentName,
                                      Callable<Component> factory)

Description copied from interface: CamelContext

Gets the a previously added component by name or lazily creates the component using the factory Callback.

Specified by:

getOrCreateComponent in interface CamelContext

Parameters:

componentName - the name of the component

factory - used to create a new component instance if the component was not previously added.

Returns:

the component

getEndpoints

public Collection<Endpoint> getEndpoints()

Description copied from interface: CamelContext

Returns the collection of all registered endpoints.

Specified by:

getEndpoints in interface CamelContext

Returns:

all endpoints

getEndpointMap

public Map<String,Endpoint> getEndpointMap()

Description copied from interface: CamelContext

Returns a new Map containing all of the active endpoints with the key of the map being their unique key.

Specified by:

getEndpointMap in interface CamelContext

Returns:

map of active endpoints

hasEndpoint

public Endpoint hasEndpoint(String uri)

Description copied from interface: CamelContext

Is the given endpoint already registered?

Specified by:

hasEndpoint in interface CamelContext

Parameters:

uri - the URI of the endpoint

Returns:

the registered endpoint or null if not registered

getEndpoints

public Collection<Endpoint> getEndpoints(String uri)

Description copied from interface: CamelContext

Returns the collection of all registered endpoints for a uri or an empty collection. For a singleton endpoint the collection will contain exactly one element.

Specified by:

getEndpoints in interface CamelContext

Parameters:

uri - the URI of the endpoints

Returns:

collection of endpoints

getSingletonEndpoints

public Collection<Endpoint> getSingletonEndpoints()

Description copied from interface: CamelContext

Returns the collection of all registered singleton endpoints.

Specified by:

getSingletonEndpoints in interface CamelContext

Returns:

all the singleton endpoints

addEndpoint

public Endpoint addEndpoint(String uri,
                            Endpoint endpoint)
                     throws Exception

Description copied from interface: CamelContext

Adds the endpoint to the context using the given URI.

Specified by:

addEndpoint in interface CamelContext

Parameters:

uri - the URI to be used to resolve this endpoint

endpoint - the endpoint to be added to the context

Returns:

the old endpoint that was previously registered or null if none was registered

Throws:

Exception - if the new endpoint could not be started or the old endpoint could not be stopped

removeEndpoints

public Collection<Endpoint> removeEndpoints(String uri)
                                     throws Exception

Description copied from interface: CamelContext

Removes all endpoints with the given URI

Specified by:

removeEndpoints in interface CamelContext

Parameters:

uri - the URI to be used to remove

Returns:

a collection of endpoints removed or null if there are no endpoints for this URI

Throws:

Exception - if at least one endpoint could not be stopped

getEndpoint

public Endpoint getEndpoint(String uri)

Description copied from interface: CamelContext

Resolves the given name to an Endpoint of the specified type. If the name has a singleton endpoint registered, then the singleton is returned. Otherwise, a new Endpoint is created and registered.

Specified by:

getEndpoint in interface CamelContext

Parameters:

uri - the URI of the endpoint

Returns:

the endpoint

getEndpoint

public <T extends Endpoint> T getEndpoint(String name,
                                          Class<T> endpointType)

Description copied from interface: CamelContext

Resolves the given name to an Endpoint of the specified type. If the name has a singleton endpoint registered, then the singleton is returned. Otherwise, a new Endpoint is created and registered.

Specified by:

getEndpoint in interface CamelContext

Parameters:

name - the name of the endpoint

endpointType - the expected type

Returns:

the endpoint

addRegisterEndpointCallback

public void addRegisterEndpointCallback(EndpointStrategy strategy)

Description copied from interface: CamelContext

Registers a callback to allow you to do custom logic when an Endpoint is about to be registered to the CamelContext endpoint registry.

When a callback is added it will be executed on the already registered endpoints allowing you to catch-up

Specified by:

addRegisterEndpointCallback in interface CamelContext

Parameters:

strategy - callback to be invoked

addEndpointToRegistry

protected Endpoint addEndpointToRegistry(String uri,
                                         Endpoint endpoint)

Strategy to add the given endpoint to the internal endpoint registry

Parameters:

uri - uri of endpoint

endpoint - the endpoint to add

Returns:

the added endpoint

getRouteStartupOrder

public List<Consumer> getRouteStartupOrder()

Returns the order in which the route inputs was started.

Returns:

a list ordered by the starting order of the route inputs

getRoutes

public List<Route> getRoutes()

Description copied from interface: CamelContext

Returns the current routes in this context

Specified by:

getRoutes in interface CamelContext

Returns:

the current routes

setRoutes

public void setRoutes(List<Route> routes)

addRoutes

public void addRoutes(RoutesBuilder builder)
               throws Exception

Description copied from interface: CamelContext

Adds a collection of routes to this context using the given builder to build them

Specified by:

addRoutes in interface CamelContext

Parameters:

builder - the builder which will create the routes and add them to this context

Throws:

Exception - if the routes could not be created for whatever reason

addRouteDefinitions

public void addRouteDefinitions(Collection<RouteDefinition> routeDefinitions)
                         throws Exception

Description copied from interface: CamelContext

Adds a collection of route definitions to the context

Specified by:

addRouteDefinitions in interface CamelContext

Parameters:

routeDefinitions - the route definitions to add

Throws:

Exception - if the route definition could not be created for whatever reason

removeRouteDefinition

public boolean removeRouteDefinition(String key)

Removes the route definition with the given key.

Returns:

true if one or more routes was removed

removeRouteDefinitions

public void removeRouteDefinitions(Collection<RouteDefinition> routeDefinitions)
                            throws Exception

Description copied from interface: CamelContext

Removes a collection of route definitions from the context - stopping any previously running routes if any of them are actively running

Specified by:

removeRouteDefinitions in interface CamelContext

Parameters:

routeDefinitions - route definitions

Throws:

Exception - if the route definition could not be removed for whatever reason

removeRouteDefinition

public void removeRouteDefinition(RouteDefinition routeDefinition)
                           throws Exception

Throws:

Exception

getRouteStatus

public ServiceStatus getRouteStatus(RouteDefinition route)

Description copied from interface: CamelContext

Returns the current status of the given route

Specified by:

getRouteStatus in interface CamelContext

Parameters:

route - the route

Returns:

the status for the route

getRouteStatus

public ServiceStatus getRouteStatus(String key)

Description copied from interface: CamelContext

Returns the current status of the given route

Specified by:

getRouteStatus in interface CamelContext

Parameters:

key - the route id

Returns:

the status for the route

startRoute

public void startRoute(RouteDefinition route)
                throws Exception

Description copied from interface: CamelContext

Starts the given route if it has been previously stopped

Specified by:

startRoute in interface CamelContext

Parameters:

route - the route to start

Throws:

Exception - is thrown if the route could not be started for whatever reason

startRoute

public void startRoute(String routeId)
                throws Exception

Description copied from interface: CamelContext

Starts the given route if it has been previously stopped

Specified by:

startRoute in interface CamelContext

Parameters:

routeId - the route id

Throws:

Exception - is thrown if the route could not be started for whatever reason

stopRoute

public void stopRoute(RouteDefinition route)
               throws Exception

Description copied from interface: CamelContext

Stops the given route. It will remain in the list of route definitions return by CamelContext.getRouteDefinitions() unless you use the CamelContext.removeRouteDefinitions(java.util.Collection)

Specified by:

stopRoute in interface CamelContext

Parameters:

route - the route to stop

Throws:

Exception - is thrown if the route could not be stopped for whatever reason

stopRoute

public void stopRoute(String key)
               throws Exception

Stops the route denoted by the given RouteType id

Specified by:

stopRoute in interface CamelContext

Parameters:

key - the route id

Throws:

Exception - is thrown if the route could not be stopped for whatever reason

addService

public void addService(Object object)
                throws Exception

Description copied from interface: CamelContext

Adds a service, starting it so that it will be stopped with this context

Specified by:

addService in interface CamelContext

Parameters:

object - the service

Throws:

Exception - can be thrown when starting the service

hasService

public boolean hasService(Object object)

Description copied from interface: CamelContext

Has the given service already been added?

Specified by:

hasService in interface CamelContext

Parameters:

object - the service

Returns:

true if already added, false if not.

resolveLanguage

public Language resolveLanguage(String language)

Description copied from interface: CamelContext

Resolves a language for creating expressions

Specified by:

resolveLanguage in interface CamelContext

Parameters:

language - name of the language

Returns:

the resolved language

getTypeConverter

public TypeConverter getTypeConverter()

Description copied from interface: CamelContext

Returns the type converter used to coerce types from one type to another

Specified by:

getTypeConverter in interface CamelContext

Returns:

the converter

setTypeConverter

public void setTypeConverter(TypeConverter typeConverter)

getTypeConverterRegistry

public TypeConverterRegistry getTypeConverterRegistry()

Description copied from interface: CamelContext

Returns the type converter registry where type converters can be added or looked up

Specified by:

getTypeConverterRegistry in interface CamelContext

Returns:

the type converter registry

setTypeConverterRegistry

public void setTypeConverterRegistry(TypeConverterRegistry typeConverterRegistry)

getInjector

public Injector getInjector()

Description copied from interface: CamelContext

Returns the injector used to instantiate objects by type

Specified by:

getInjector in interface CamelContext

Returns:

the injector

setInjector

public void setInjector(Injector injector)

getComponentResolver

public ComponentResolver getComponentResolver()

setComponentResolver

public void setComponentResolver(ComponentResolver componentResolver)

getLanguageResolver

public LanguageResolver getLanguageResolver()

setLanguageResolver

public void setLanguageResolver(LanguageResolver languageResolver)

isAutoCreateComponents

public boolean isAutoCreateComponents()

setAutoCreateComponents

public void setAutoCreateComponents(boolean autoCreateComponents)

getRegistry

public Registry getRegistry()

Description copied from interface: CamelContext

Returns the registry used to lookup components by name and type such as the Spring ApplicationContext, JNDI or the OSGi Service Registry

Specified by:

getRegistry in interface CamelContext

Returns:

the registry

setJndiContext

public void setJndiContext(Context jndiContext)

Sets the registry to the given JNDI context

Parameters:

jndiContext - is the JNDI context to use as the registry

See Also:

setRegistry(org.apache.camel.spi.Registry)

setRegistry

public void setRegistry(Registry registry)

getLifecycleStrategies

public List<LifecycleStrategy> getLifecycleStrategies()

Description copied from interface: CamelContext

Returns the lifecycle strategies used to handle lifecycle notifications

Specified by:

getLifecycleStrategies in interface CamelContext

Returns:

the lifecycle strategies

setLifecycleStrategies

public void setLifecycleStrategies(List<LifecycleStrategy> lifecycleStrategies)

addLifecycleStrategy

public void addLifecycleStrategy(LifecycleStrategy lifecycleStrategy)

Description copied from interface: CamelContext

Adds the given lifecycle strategy to be used.

Specified by:

addLifecycleStrategy in interface CamelContext

Parameters:

lifecycleStrategy - the strategy

getRouteDefinitions

public List<RouteDefinition> getRouteDefinitions()

Description copied from interface: CamelContext

Returns a list of the current route definitions

Specified by:

getRouteDefinitions in interface CamelContext

Returns:

list of the current route definitions

getRouteDefinition

public RouteDefinition getRouteDefinition(String id)

Description copied from interface: CamelContext

Gets the route definition with the given id

Specified by:

getRouteDefinition in interface CamelContext

Parameters:

id - id of the route

Returns:

the route definition or null if not found

getInterceptStrategies

public List<InterceptStrategy> getInterceptStrategies()

Description copied from interface: CamelContext

Gets the interceptor strategies

Specified by:

getInterceptStrategies in interface CamelContext

Returns:

the list of current interceptor strategies

setInterceptStrategies

public void setInterceptStrategies(List<InterceptStrategy> interceptStrategies)

addInterceptStrategy

public void addInterceptStrategy(InterceptStrategy interceptStrategy)

Description copied from interface: CamelContext

Adds the given interceptor strategy

Specified by:

addInterceptStrategy in interface CamelContext

Parameters:

interceptStrategy - the strategy

setStreamCaching

public void setStreamCaching(Boolean cache)

Description copied from interface: RuntimeConfiguration

Sets whether stream caching is enabled or not (default is disabled).

Is disabled by default

Specified by:

setStreamCaching in interface RuntimeConfiguration

Parameters:

cache - whether stream caching is enabled or not

isStreamCaching

public boolean isStreamCaching()

Description copied from interface: RuntimeConfiguration

Returns whether stream cache is enabled

Specified by:

isStreamCaching in interface RuntimeConfiguration

Returns:

true if stream cache is enabled

setTracing

public void setTracing(Boolean tracing)

Description copied from interface: RuntimeConfiguration

Sets whether tracing is enabled or not (default is disabled).

Is disabled by default

Specified by:

setTracing in interface RuntimeConfiguration

Parameters:

tracing - whether tracing is enabled or not.

isTracing

public boolean isTracing()

Description copied from interface: RuntimeConfiguration

Returns whether tracing enabled

Specified by:

isTracing in interface RuntimeConfiguration

Returns:

true if tracing is enabled

isHandleFault

public boolean isHandleFault()

Description copied from interface: RuntimeConfiguration

Returns whether tracing enabled

Specified by:

isHandleFault in interface RuntimeConfiguration

Returns:

true if tracing is enabled

setHandleFault

public void setHandleFault(Boolean handleFault)

Description copied from interface: RuntimeConfiguration

Sets whether handle fault is enabled or not (default is disabled).

Is disabled by default

Specified by:

setHandleFault in interface RuntimeConfiguration

Parameters:

handleFault - whether handle fault is enabled or not.

getDelayer

public Long getDelayer()

Description copied from interface: RuntimeConfiguration

Gets the delay value

Specified by:

getDelayer in interface RuntimeConfiguration

Returns:

delay in millis, or null if disabled

setDelayer

public void setDelayer(long delay)

Description copied from interface: RuntimeConfiguration

Sets a delay value in millis that a message is delayed at every step it takes in the route path, to slow things down to better helps you to see what goes

Is disabled by default

Specified by:

setDelayer in interface RuntimeConfiguration

Parameters:

delay - delay in millis

createProducerTemplate

public ProducerTemplate createProducerTemplate()

Description copied from interface: CamelContext

Creates a new ProducerTemplate.

See this FAQ before use: Why does Camel use too many threads with ProducerTemplate?

Specified by:

createProducerTemplate in interface CamelContext

Returns:

the template

createConsumerTemplate

public ConsumerTemplate createConsumerTemplate()

Description copied from interface: CamelContext

Creates a new ConsumerTemplate.

See this FAQ before use: Why does Camel use too many threads with ProducerTemplate? as it also applies for ConsumerTemplate.

Specified by:

createConsumerTemplate in interface CamelContext

Returns:

the template

getErrorHandlerBuilder

public ErrorHandlerBuilder getErrorHandlerBuilder()

Description copied from interface: CamelContext

Gets the default error handler builder which is inherited by the routes

Specified by:

getErrorHandlerBuilder in interface CamelContext

Returns:

the builder

setErrorHandlerBuilder

public void setErrorHandlerBuilder(ErrorHandlerBuilder errorHandlerBuilder)

Sets the default error handler builder which is inherited by the routes

Specified by:

setErrorHandlerBuilder in interface CamelContext

Parameters:

errorHandlerBuilder - the builder

setProducerServicePool

public void setProducerServicePool(ServicePool<Endpoint,Producer> producerServicePool)

Description copied from interface: CamelContext

Sets a pluggable service pool to use for Producer pooling.

Specified by:

setProducerServicePool in interface CamelContext

Parameters:

producerServicePool - the pool

getProducerServicePool

public ServicePool<Endpoint,Producer> getProducerServicePool()

Description copied from interface: CamelContext

Gets the service pool for Producer pooling.

Specified by:

getProducerServicePool in interface CamelContext

Returns:

the service pool

start

public void start()
           throws Exception

Description copied from interface: Service

Starts the service

Specified by:

start in interface Service

Overrides:

start in class ServiceSupport

Throws:

Exception - is thrown if starting failed

doStart

protected void doStart()
                throws Exception

Specified by:

doStart in class ServiceSupport

Throws:

Exception

doStop

protected void doStop()
               throws Exception

Specified by:

doStop in class ServiceSupport

Throws:

Exception

startRouteDefinitions

protected void startRouteDefinitions(Collection<RouteDefinition> list)
                              throws Exception

Throws:

Exception

startRouteService

protected void startRouteService(RouteService routeService)
                          throws Exception

Starts the given route service

Throws:

Exception

forceLazyInitialization

protected void forceLazyInitialization()

Lets force some lazy initialization to occur upfront before we start any components and create routes

createTypeConverter

protected TypeConverter createTypeConverter()

Lazily create a default implementation

createInjector

protected Injector createInjector()

Lazily create a default implementation

createComponentResolver

protected ComponentResolver createComponentResolver()

Lazily create a default implementation

createRegistry

protected Registry createRegistry()

Lazily create a default implementation

createEndpoint

protected Endpoint createEndpoint(String uri)

A pluggable strategy to allow an endpoint to be created without requiring a component to be its factory, such as for looking up the URI inside some Registry

Parameters:

uri - the uri for the endpoint to be created

Returns:

the newly created endpoint or null if it could not be resolved

convertBeanToEndpoint

protected Endpoint convertBeanToEndpoint(String uri,
                                         Object bean)

Strategy method for attempting to convert the bean from a Registry to an endpoint using some kind of transformation or wrapper

Parameters:

uri - the uri for the endpoint (and name in the registry)

bean - the bean to be converted to an endpoint, which will be not null

Returns:

a new endpoint

shouldStartRoutes

protected boolean shouldStartRoutes()

Should we start newly added routes?

setDataFormats

public void setDataFormats(Map<String,DataFormatDefinition> dataFormats)

Description copied from interface: CamelContext

Sets the data formats that can be referenced in the routes.

Specified by:

setDataFormats in interface CamelContext

Parameters:

dataFormats - the data formats

getDataFormats

public Map<String,DataFormatDefinition> getDataFormats()

Description copied from interface: CamelContext

Gets the data formats that can be referenced in the routes.

Specified by:

getDataFormats in interface CamelContext

Returns:

the data formats available

getProperties

public Map<String,String> getProperties()

Description copied from interface: CamelContext

Gets the properties that can be referenced in the camel context

Specified by:

getProperties in interface CamelContext

Returns:

the properties

setProperties

public void setProperties(Map<String,String> properties)

Description copied from interface: CamelContext

Sets the properties that can be referenced in the camel context

Specified by:

setProperties in interface CamelContext

Parameters:

properties - properties

getDefaultFactoryFinder

public FactoryFinder getDefaultFactoryFinder()

Description copied from interface: CamelContext

Gets the default FactoryFinder which will be used for the loading the factory class from META-INF

Specified by:

getDefaultFactoryFinder in interface CamelContext

Returns:

the default factory finder

setFactoryFinderResolver

public void setFactoryFinderResolver(FactoryFinderResolver resolver)

Description copied from interface: CamelContext

Sets the factory finder resolver to use.

Specified by:

setFactoryFinderResolver in interface CamelContext

Parameters:

resolver - the factory finder resolver

getFactoryFinder

public FactoryFinder getFactoryFinder(String path)
                               throws NoFactoryAvailableException

Description copied from interface: CamelContext

Gets the FactoryFinder which will be used for the loading the factory class from META-INF in the given path

Specified by:

getFactoryFinder in interface CamelContext

Parameters:

path - the META-INF path

Returns:

the factory finder

Throws:

NoFactoryAvailableException - is thrown if a factory could not be found

getClassResolver

public ClassResolver getClassResolver()

Description copied from interface: CamelContext

Returns the class resolver to be used for loading/lookup of classes.

Specified by:

getClassResolver in interface CamelContext

Returns:

the resolver

setClassResolver

public void setClassResolver(ClassResolver classResolver)

Description copied from interface: CamelContext

Sets the class resolver to be use

Specified by:

setClassResolver in interface CamelContext

Parameters:

classResolver - the resolver

getPackageScanClassResolver

public PackageScanClassResolver getPackageScanClassResolver()

Description copied from interface: CamelContext

Returns the package scanning class resolver

Specified by:

getPackageScanClassResolver in interface CamelContext

Returns:

the resolver

setPackageScanClassResolver

public void setPackageScanClassResolver(PackageScanClassResolver packageScanClassResolver)

Description copied from interface: CamelContext

Sets the package scanning class resolver to use

Specified by:

setPackageScanClassResolver in interface CamelContext

Parameters:

packageScanClassResolver - the resolver

getComponentNames

public List<String> getComponentNames()

Description copied from interface: CamelContext

Gets a readonly list of names of the components currently registered

Specified by:

getComponentNames in interface CamelContext

Returns:

a readonly list with the names of the the components

getLanguageNames

public List<String> getLanguageNames()

Description copied from interface: CamelContext

Gets a readonly list with the names of the languages currently registered.

Specified by:

getLanguageNames in interface CamelContext

Returns:

a readonly list with the names of the the languages

getNodeIdFactory

public NodeIdFactory getNodeIdFactory()

Description copied from interface: CamelContext

Gets the node id factory

Specified by:

getNodeIdFactory in interface CamelContext

Returns:

the node id factory

setNodeIdFactory

public void setNodeIdFactory(NodeIdFactory idFactory)

Description copied from interface: CamelContext

Uses a custom node id factory when generating auto assigned ids to the nodes in the route definitions

Specified by:

setNodeIdFactory in interface CamelContext

Parameters:

idFactory - custom factory to use

getManagementStrategy

public ManagementStrategy getManagementStrategy()

Description copied from interface: CamelContext

Gets the management strategy

Specified by:

getManagementStrategy in interface CamelContext

Returns:

the management strategy

setManagementStrategy

public void setManagementStrategy(ManagementStrategy managementStrategy)

Description copied from interface: CamelContext

Sets the management strategy to use

Specified by:

setManagementStrategy in interface CamelContext

Parameters:

managementStrategy - the management strategy

getDefaultTracer

public InterceptStrategy getDefaultTracer()

Description copied from interface: CamelContext

Gets the default tracer

Specified by:

getDefaultTracer in interface CamelContext

Returns:

the default tracer

disableJMX

public void disableJMX()

Description copied from interface: CamelContext

Disables using JMX as ManagementStrategy.

Specified by:

disableJMX in interface CamelContext

getInflightRepository

public InflightRepository getInflightRepository()

Description copied from interface: CamelContext

Gets the inflight repository

Specified by:

getInflightRepository in interface CamelContext

Returns:

the repository

setInflightRepository

public void setInflightRepository(InflightRepository repository)

Description copied from interface: CamelContext

Sets a custom inflight repository to use

Specified by:

setInflightRepository in interface CamelContext

Parameters:

repository - the repository

setAutoStartup

public void setAutoStartup(Boolean autoStartup)

Description copied from interface: RuntimeConfiguration

Sets whether it should automatic start when Camel starts.

Currently only routes can be disabled, as CamelContext itself are always started}
Default is true to always startup.

Specified by:

setAutoStartup in interface RuntimeConfiguration

Parameters:

autoStartup - whether to auto startup.

isAutoStartup

public boolean isAutoStartup()

Description copied from interface: RuntimeConfiguration

Gets whether it should automatic start when Camel starts.

Specified by:

isAutoStartup in interface RuntimeConfiguration

Returns:

true if should auto start

getApplicationContextClassLoader

public ClassLoader getApplicationContextClassLoader()

Description copied from interface: CamelContext

Gets the the application context class loader which may be helpful for running camel in other containers

Specified by:

getApplicationContextClassLoader in interface CamelContext

Returns:

the application context class loader

setApplicationContextClassLoader

public void setApplicationContextClassLoader(ClassLoader classLoader)

Description copied from interface: CamelContext

Sets the application context class loader

Specified by:

setApplicationContextClassLoader in interface CamelContext

Parameters:

classLoader - the class loader

getDataFormatResolver

public DataFormatResolver getDataFormatResolver()

setDataFormatResolver

public void setDataFormatResolver(DataFormatResolver dataFormatResolver)

resolveDataFormat

public DataFormat resolveDataFormat(String name)

Description copied from interface: CamelContext

Resolve a data format given its name

Specified by:

resolveDataFormat in interface CamelContext

Parameters:

name - the data format name or a reference to it in the Registry

Returns:

the resolved data format, or null if not found

resolveDataFormatDefinition

public DataFormatDefinition resolveDataFormatDefinition(String name)

Description copied from interface: CamelContext

Resolve a data format definition given its name

Specified by:

resolveDataFormatDefinition in interface CamelContext

Parameters:

name - the data format definition name or a reference to it in the Registry

Returns:

the resolved data format definition, or null if not found

getEndpointKey

protected String getEndpointKey(String uri,
                                Endpoint endpoint)

getRouteServices

protected Map<String,RouteService> getRouteServices()

createManagementStrategy

protected ManagementStrategy createManagementStrategy()

toString

public String toString()

Overrides:

toString in class Object