ProducerTemplate (Camel :: Core 2.22.2 API)

All Superinterfaces:

Service

All Known Implementing Classes:

DefaultProducerTemplate
```
public interface ProducerTemplate
extends Service
```
Template for working with Camel and sending Message instances in an Exchange to an Endpoint.

Important: Read the javadoc of each method carefully to ensure the behavior of the method is understood. Some methods is for InOnly, others for InOut MEP. And some methods throws CamelExecutionException while others stores any thrown exception on the returned Exchange.

The ProducerTemplate is thread safe.

All the methods which sends a message may throw FailedToCreateProducerException in case the Producer could not be created. Or a NoSuchEndpointException if the endpoint could not be resolved. There may be other related exceptions being thrown which occurs before the Producer has started sending the message.

All the sendBody or requestBody methods will return the content according to this strategy:
- throws CamelExecutionException if processing failed during routing with the caused exception wrapped
- The fault.body if there is a fault message set and its not null
- Either IN or OUT body according to the message exchange pattern. If the pattern is Out capable then the OUT body is returned, otherwise IN.
Before using the template it must be started. And when you are done using the template, make sure to Service.stop() the template.

Important note on usage: See this FAQ entry before using.
See Also:

FluentProducerTemplate, ConsumerTemplate

Method Summary

All Methods Instance Methods Abstract Methods
Modifier and Type	Method and Description
`CompletableFuture<Exchange>`	`asyncCallback(Endpoint endpoint, Exchange exchange, Synchronization onCompletion)` Sends an asynchronous exchange to the given endpoint.
`CompletableFuture<Exchange>`	`asyncCallback(Endpoint endpoint, Processor processor, Synchronization onCompletion)` Sends an asynchronous exchange to the given endpoint using a supplied processor.
`CompletableFuture<Exchange>`	`asyncCallback(String endpointUri, Exchange exchange, Synchronization onCompletion)` Sends an asynchronous exchange to the given endpoint.
`CompletableFuture<Exchange>`	`asyncCallback(String endpointUri, Processor processor, Synchronization onCompletion)` Sends an asynchronous exchange to the given endpoint using a supplied processor.
`CompletableFuture<Object>`	`asyncCallbackRequestBody(Endpoint endpoint, Object body, Synchronization onCompletion)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncCallbackRequestBody(String endpointUri, Object body, Synchronization onCompletion)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncCallbackSendBody(Endpoint endpoint, Object body, Synchronization onCompletion)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncCallbackSendBody(String endpointUri, Object body, Synchronization onCompletion)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncRequestBody(Endpoint endpoint, Object body)` Sends an asynchronous body to the given endpoint.
`<T> CompletableFuture<T>`	`asyncRequestBody(Endpoint endpoint, Object body, Class<T> type)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncRequestBody(String endpointUri, Object body)` Sends an asynchronous body to the given endpoint.
`<T> CompletableFuture<T>`	`asyncRequestBody(String endpointUri, Object body, Class<T> type)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncRequestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue)` Sends an asynchronous body to the given endpoint.
`<T> CompletableFuture<T>`	`asyncRequestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue, Class<T> type)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncRequestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue)` Sends an asynchronous body to the given endpoint.
`<T> CompletableFuture<T>`	`asyncRequestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue, Class<T> type)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncRequestBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers)` Sends an asynchronous body to the given endpoint.
`<T> CompletableFuture<T>`	`asyncRequestBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers, Class<T> type)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncRequestBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers)` Sends an asynchronous body to the given endpoint.
`<T> CompletableFuture<T>`	`asyncRequestBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers, Class<T> type)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Exchange>`	`asyncSend(Endpoint endpoint, Exchange exchange)` Sends an asynchronous exchange to the given endpoint.
`CompletableFuture<Exchange>`	`asyncSend(Endpoint endpoint, Processor processor)` Sends an asynchronous exchange to the given endpoint.
`CompletableFuture<Exchange>`	`asyncSend(String endpointUri, Exchange exchange)` Sends an asynchronous exchange to the given endpoint.
`CompletableFuture<Exchange>`	`asyncSend(String endpointUri, Processor processor)` Sends an asynchronous exchange to the given endpoint.
`CompletableFuture<Object>`	`asyncSendBody(Endpoint endpoint, Object body)` Sends an asynchronous body to the given endpoint.
`CompletableFuture<Object>`	`asyncSendBody(String endpointUri, Object body)` Sends an asynchronous body to the given endpoint.
`void`	`cleanUp()` Cleanup the cache (purging stale entries)
`<T> T`	`extractFutureBody(Future<?> future, Class<T> type)` Gets the response body from the future handle, will wait until the response is ready.
`<T> T`	`extractFutureBody(Future<?> future, long timeout, TimeUnit unit, Class<T> type)` Gets the response body from the future handle, will wait at most the given time for the response to be ready.
`CamelContext`	`getCamelContext()` Get the `CamelContext`
`int`	`getCurrentCacheSize()` Gets an approximated size of the current cached resources in the backing cache pools.
`Endpoint`	`getDefaultEndpoint()` Get the default endpoint to use if none is specified
`int`	`getMaximumCacheSize()` Gets the maximum cache size used in the backing cache pools.
`boolean`	`isEventNotifierEnabled()` Whether the `EventNotifier` should be used by this `ProducerTemplate` to send events about the `Exchange` being sent.
`boolean`	`isThreadedAsyncMode()` Reports if async* methods will dispath processing from the calling thread (false) or through executor (true).
`Exchange`	`request(Endpoint endpoint, Processor processor)` Sends an exchange to an endpoint using a supplied processor Uses an `ExchangePattern.InOut` message exchange pattern.
`Exchange`	`request(String endpointUri, Processor processor)` Sends an exchange to an endpoint using a supplied processor Uses an `ExchangePattern.InOut` message exchange pattern.
`Object`	`requestBody(Endpoint endpoint, Object body)` Send the body to an endpoint returning any result output body.
`<T> T`	`requestBody(Endpoint endpoint, Object body, Class<T> type)` Send the body to an endpoint returning any result output body.
`Object`	`requestBody(Object body)` Sends the body to the default endpoint and returns the result content Uses an `ExchangePattern.InOut` message exchange pattern.
`<T> T`	`requestBody(Object body, Class<T> type)` Sends the body to the default endpoint and returns the result content Uses an `ExchangePattern.InOut` message exchange pattern.
`Object`	`requestBody(String endpointUri, Object body)` Send the body to an endpoint returning any result output body.
`<T> T`	`requestBody(String endpointUri, Object body, Class<T> type)` Send the body to an endpoint returning any result output body.
`Object`	`requestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue)` Send the body to an endpoint returning any result output body.
`<T> T`	`requestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue, Class<T> type)` Send the body to an endpoint returning any result output body.
`Object`	`requestBodyAndHeader(Object body, String header, Object headerValue)` Sends the body to the default endpoint and returns the result content Uses an `ExchangePattern.InOut` message exchange pattern.
`Object`	`requestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue)` Send the body to an endpoint returning any result output body.
`<T> T`	`requestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue, Class<T> type)` Send the body to an endpoint returning any result output body.
`Object`	`requestBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers)` Sends the body to an endpoint with the specified headers and header values.
`<T> T`	`requestBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers, Class<T> type)` Sends the body to an endpoint with the specified headers and header values.
`Object`	`requestBodyAndHeaders(Object body, Map<String,Object> headers)` Sends the body to the default endpoint and returns the result content Uses an `ExchangePattern.InOut` message exchange pattern.
`Object`	`requestBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers)` Sends the body to an endpoint with the specified headers and header values.
`<T> T`	`requestBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers, Class<T> type)` Sends the body to an endpoint with the specified headers and header values.
`Exchange`	`send(Endpoint endpoint, Exchange exchange)` Sends the exchange to the given endpoint Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Exchange`	`send(Endpoint endpoint, ExchangePattern pattern, Processor processor)` Sends an exchange to an endpoint using a supplied processor Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Exchange`	`send(Endpoint endpoint, ExchangePattern pattern, Processor processor, Processor resultProcessor)` Sends an exchange to an endpoint using a supplied processor Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Exchange`	`send(Endpoint endpoint, Processor processor)` Sends an exchange to an endpoint using a supplied processor Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Exchange`	`send(Exchange exchange)` Sends the exchange to the default endpoint Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Exchange`	`send(Processor processor)` Sends an exchange to the default endpoint using a supplied processor Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Exchange`	`send(String endpointUri, Exchange exchange)` Sends the exchange to the given endpoint Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Exchange`	`send(String endpointUri, ExchangePattern pattern, Processor processor)` Sends an exchange to an endpoint using a supplied processor Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Exchange`	`send(String endpointUri, Processor processor)` Sends an exchange to an endpoint using a supplied processor Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using `Exchange.getException()`.
`Object`	`sendBody(Endpoint endpoint, ExchangePattern pattern, Object body)` Send the body to an endpoint with the given `ExchangePattern` returning any result output body Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBody(Endpoint endpoint, Object body)` Send the body to an endpoint Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBody(Object body)` Sends the body to the default endpoint Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`Object`	`sendBody(String endpointUri, ExchangePattern pattern, Object body)` Send the body to an endpoint returning any result output body Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBody(String endpointUri, Object body)` Send the body to an endpoint Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`Object`	`sendBodyAndHeader(Endpoint endpoint, ExchangePattern pattern, Object body, String header, Object headerValue)` Sends the body to an endpoint with a specified header and header value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue)` Sends the body to an endpoint with a specified header and header value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndHeader(Object body, String header, Object headerValue)` Sends the body to the default endpoint with a specified header and header value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`Object`	`sendBodyAndHeader(String endpoint, ExchangePattern pattern, Object body, String header, Object headerValue)` Sends the body to an endpoint with a specified header and header value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndHeader(String endpointUri, Object body, String header, Object headerValue)` Sends the body to an endpoint with a specified header and header value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`Object`	`sendBodyAndHeaders(Endpoint endpoint, ExchangePattern pattern, Object body, Map<String,Object> headers)` Sends the body to an endpoint with the specified headers and header values Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndHeaders(Endpoint endpoint, Object body, Map<String,Object> headers)` Sends the body to an endpoint with the specified headers and header values Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndHeaders(Object body, Map<String,Object> headers)` Sends the body to the default endpoint with the specified headers and header values Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`Object`	`sendBodyAndHeaders(String endpointUri, ExchangePattern pattern, Object body, Map<String,Object> headers)` Sends the body to an endpoint with the specified headers and header values Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndHeaders(String endpointUri, Object body, Map<String,Object> headers)` Sends the body to an endpoint with the specified headers and header values Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`Object`	`sendBodyAndProperty(Endpoint endpoint, ExchangePattern pattern, Object body, String property, Object propertyValue)` Sends the body to an endpoint with a specified property and property value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndProperty(Endpoint endpoint, Object body, String property, Object propertyValue)` Sends the body to an endpoint with a specified property and property value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndProperty(Object body, String property, Object propertyValue)` Sends the body to the default endpoint with a specified property and property value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`Object`	`sendBodyAndProperty(String endpoint, ExchangePattern pattern, Object body, String property, Object propertyValue)` Sends the body to an endpoint with a specified property and property value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`sendBodyAndProperty(String endpointUri, Object body, String property, Object propertyValue)` Sends the body to an endpoint with a specified property and property value Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a `CamelExecutionException` with the caused exception wrapped.
`void`	`setDefaultEndpoint(Endpoint defaultEndpoint)` Sets the default endpoint to use if none is specified
`void`	`setDefaultEndpointUri(String endpointUri)` Sets the default endpoint uri to use if none is specified
`void`	`setEventNotifierEnabled(boolean enabled)` Sets whether the `EventNotifier` should be used by this `ProducerTemplate` to send events about the `Exchange` being sent.
`void`	`setExecutorService(ExecutorService executorService)` Sets a custom executor service to use for async messaging.
`void`	`setMaximumCacheSize(int maximumCacheSize)` Sets a custom maximum cache size to use in the backing cache pools.
`void`	`setThreadedAsyncMode(boolean useExecutor)` Reports if async* methods will dispath processing from the calling thread (false) or through executor (true).

Methods inherited from interface org.apache.camel.Service
start, stop

- Method Detail
  - getCamelContext
```
CamelContext getCamelContext()
```
    Get the CamelContext
    
    Returns:
    
    camelContext the Camel context
  - getMaximumCacheSize
```
int getMaximumCacheSize()
```
    Gets the maximum cache size used in the backing cache pools.
    
    Returns:
    
    the maximum cache size
  - setMaximumCacheSize
```
void setMaximumCacheSize(int maximumCacheSize)
```
    Sets a custom maximum cache size to use in the backing cache pools.
    
    Parameters:
    
    maximumCacheSize - the custom maximum cache size
  - getCurrentCacheSize
```
int getCurrentCacheSize()
```
    Gets an approximated size of the current cached resources in the backing cache pools.
    
    Returns:
    
    the size of current cached resources
  - isThreadedAsyncMode
```
boolean isThreadedAsyncMode()
```
    Reports if async* methods will dispath processing from the calling thread (false) or through executor (true). In both cases asynchronous engine will be used, so this non-threaded can be useful for high-speed non-blocking processing.
    
    Returns:
    
    if async* methods will dipatch processing with the executor
  - setThreadedAsyncMode
```
void setThreadedAsyncMode(boolean useExecutor)
```
    Reports if async* methods will dispath processing from the calling thread (false) or through executor (true). In both cases asynchronous engine will be used, so this non-threaded can be useful for high-speed non-blocking processing.
    
    Parameters:
    
    useExecutor - if async* methods will dipatch processing with the executor
  - getDefaultEndpoint
```
Endpoint getDefaultEndpoint()
```
    Get the default endpoint to use if none is specified
    
    Returns:
    
    the default endpoint instance
  - setDefaultEndpoint
```
void setDefaultEndpoint(Endpoint defaultEndpoint)
```
    Sets the default endpoint to use if none is specified
    
    Parameters:
    
    defaultEndpoint - the default endpoint instance
  - setDefaultEndpointUri
```
void setDefaultEndpointUri(String endpointUri)
```
    Sets the default endpoint uri to use if none is specified
    
    Parameters:
    
    endpointUri - the default endpoint uri
  - setEventNotifierEnabled
```
void setEventNotifierEnabled(boolean enabled)
```
    Sets whether the EventNotifier should be used by this ProducerTemplate to send events about the Exchange being sent.
    By default this is enabled.
    
    Parameters:
    
    enabled - true to enable, false to disable.
  - isEventNotifierEnabled
```
boolean isEventNotifierEnabled()
```
    Whether the EventNotifier should be used by this ProducerTemplate to send events about the Exchange being sent.
    
    Returns:
    
    true if enabled, false otherwise
  - cleanUp
```
void cleanUp()
```
    Cleanup the cache (purging stale entries)
  - send
```
Exchange send(Exchange exchange)
```
    Sends the exchange to the default endpoint
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    exchange - the exchange to send
    
    Returns:
    
    the returned exchange
  - send
```
Exchange send(Processor processor)
```
    Sends an exchange to the default endpoint using a supplied processor
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    processor - the transformer used to populate the new exchange Processor to populate the exchange
    
    Returns:
    
    the returned exchange
  - sendBody
```
void sendBody(Object body)
       throws CamelExecutionException
```
    Sends the body to the default endpoint
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    body - the payload to send
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeader
```
void sendBodyAndHeader(Object body,
                       String header,
                       Object headerValue)
                throws CamelExecutionException
```
    Sends the body to the default endpoint with a specified header and header value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    body - the payload to send
    
    header - the header name
    
    headerValue - the header value
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndProperty
```
void sendBodyAndProperty(Object body,
                         String property,
                         Object propertyValue)
                  throws CamelExecutionException
```
    Sends the body to the default endpoint with a specified property and property value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    body - the payload to send
    
    property - the property name
    
    propertyValue - the property value
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeaders
```
void sendBodyAndHeaders(Object body,
                        Map<String,Object> headers)
                 throws CamelExecutionException
```
    Sends the body to the default endpoint with the specified headers and header values
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    body - the payload to send
    
    headers - the headers
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - send
```
Exchange send(String endpointUri,
              Exchange exchange)
```
    Sends the exchange to the given endpoint
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    exchange - the exchange to send
    
    Returns:
    
    the returned exchange
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - send
```
Exchange send(String endpointUri,
              Processor processor)
```
    Sends an exchange to an endpoint using a supplied processor
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    processor - the transformer used to populate the new exchange Processor to populate the exchange
    
    Returns:
    
    the returned exchange
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - send
```
Exchange send(String endpointUri,
              ExchangePattern pattern,
              Processor processor)
```
    Sends an exchange to an endpoint using a supplied processor
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    processor - the transformer used to populate the new exchange Processor to populate the exchange
    
    Returns:
    
    the returned exchange
  - send
```
Exchange send(Endpoint endpoint,
              Exchange exchange)
```
    Sends the exchange to the given endpoint
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    exchange - the exchange to send
    
    Returns:
    
    the returned exchange
  - send
```
Exchange send(Endpoint endpoint,
              Processor processor)
```
    Sends an exchange to an endpoint using a supplied processor
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    processor - the transformer used to populate the new exchange Processor to populate the exchange
    
    Returns:
    
    the returned exchange
  - send
```
Exchange send(Endpoint endpoint,
              ExchangePattern pattern,
              Processor processor)
```
    Sends an exchange to an endpoint using a supplied processor
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    processor - the transformer used to populate the new exchange Processor to populate the exchange
    
    Returns:
    
    the returned exchange
  - send
```
Exchange send(Endpoint endpoint,
              ExchangePattern pattern,
              Processor processor,
              Processor resultProcessor)
```
    Sends an exchange to an endpoint using a supplied processor
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    processor - the transformer used to populate the new exchange
    
    resultProcessor - a processor to process the exchange when the send is complete. Processor to populate the exchange
    
    Returns:
    
    the returned exchange
  - sendBody
```
void sendBody(Endpoint endpoint,
              Object body)
       throws CamelExecutionException
```
    Send the body to an endpoint
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the payload
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBody
```
void sendBody(String endpointUri,
              Object body)
       throws CamelExecutionException
```
    Send the body to an endpoint
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the payload
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBody
```
Object sendBody(Endpoint endpoint,
                ExchangePattern pattern,
                Object body)
         throws CamelExecutionException
```
    Send the body to an endpoint with the given ExchangePattern returning any result output body
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the payload
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    Returns:
    
    the result if ExchangePattern is OUT capable, otherwise null
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBody
```
Object sendBody(String endpointUri,
                ExchangePattern pattern,
                Object body)
         throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    body - the payload
    
    Returns:
    
    the result if ExchangePattern is OUT capable, otherwise null
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeader
```
void sendBodyAndHeader(String endpointUri,
                       Object body,
                       String header,
                       Object headerValue)
                throws CamelExecutionException
```
    Sends the body to an endpoint with a specified header and header value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload to send
    
    header - the header name
    
    headerValue - the header value
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeader
```
void sendBodyAndHeader(Endpoint endpoint,
                       Object body,
                       String header,
                       Object headerValue)
                throws CamelExecutionException
```
    Sends the body to an endpoint with a specified header and header value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    body - the payload to send
    
    header - the header name
    
    headerValue - the header value
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeader
```
Object sendBodyAndHeader(Endpoint endpoint,
                         ExchangePattern pattern,
                         Object body,
                         String header,
                         Object headerValue)
                  throws CamelExecutionException
```
    Sends the body to an endpoint with a specified header and header value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    body - the payload to send
    
    header - the header name
    
    headerValue - the header value
    
    Returns:
    
    the result if ExchangePattern is OUT capable, otherwise null
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeader
```
Object sendBodyAndHeader(String endpoint,
                         ExchangePattern pattern,
                         Object body,
                         String header,
                         Object headerValue)
                  throws CamelExecutionException
```
    Sends the body to an endpoint with a specified header and header value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint URI to send to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    body - the payload to send
    
    header - the header name
    
    headerValue - the header value
    
    Returns:
    
    the result if ExchangePattern is OUT capable, otherwise null
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndProperty
```
void sendBodyAndProperty(String endpointUri,
                         Object body,
                         String property,
                         Object propertyValue)
                  throws CamelExecutionException
```
    Sends the body to an endpoint with a specified property and property value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload to send
    
    property - the property name
    
    propertyValue - the property value
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndProperty
```
void sendBodyAndProperty(Endpoint endpoint,
                         Object body,
                         String property,
                         Object propertyValue)
                  throws CamelExecutionException
```
    Sends the body to an endpoint with a specified property and property value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    body - the payload to send
    
    property - the property name
    
    propertyValue - the property value
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndProperty
```
Object sendBodyAndProperty(Endpoint endpoint,
                           ExchangePattern pattern,
                           Object body,
                           String property,
                           Object propertyValue)
                    throws CamelExecutionException
```
    Sends the body to an endpoint with a specified property and property value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    body - the payload to send
    
    property - the property name
    
    propertyValue - the property value
    
    Returns:
    
    the result if ExchangePattern is OUT capable, otherwise null
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndProperty
```
Object sendBodyAndProperty(String endpoint,
                           ExchangePattern pattern,
                           Object body,
                           String property,
                           Object propertyValue)
                    throws CamelExecutionException
```
    Sends the body to an endpoint with a specified property and property value
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint URI to send to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    body - the payload to send
    
    property - the property name
    
    propertyValue - the property value
    
    Returns:
    
    the result if ExchangePattern is OUT capable, otherwise null
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeaders
```
void sendBodyAndHeaders(String endpointUri,
                        Object body,
                        Map<String,Object> headers)
                 throws CamelExecutionException
```
    Sends the body to an endpoint with the specified headers and header values
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload to send
    
    headers - headers
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeaders
```
void sendBodyAndHeaders(Endpoint endpoint,
                        Object body,
                        Map<String,Object> headers)
                 throws CamelExecutionException
```
    Sends the body to an endpoint with the specified headers and header values
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the endpoint URI to send to
    
    body - the payload to send
    
    headers - headers
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeaders
```
Object sendBodyAndHeaders(String endpointUri,
                          ExchangePattern pattern,
                          Object body,
                          Map<String,Object> headers)
                   throws CamelExecutionException
```
    Sends the body to an endpoint with the specified headers and header values
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    body - the payload to send
    
    headers - headers
    
    Returns:
    
    the result if ExchangePattern is OUT capable, otherwise null
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - sendBodyAndHeaders
```
Object sendBodyAndHeaders(Endpoint endpoint,
                          ExchangePattern pattern,
                          Object body,
                          Map<String,Object> headers)
                   throws CamelExecutionException
```
    Sends the body to an endpoint with the specified headers and header values
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the endpoint URI to send to
    
    pattern - the message ExchangePattern such as ExchangePattern.InOnly or ExchangePattern.InOut
    
    body - the payload to send
    
    headers - headers
    
    Returns:
    
    the result if ExchangePattern is OUT capable, otherwise null
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - request
```
Exchange request(Endpoint endpoint,
                 Processor processor)
```
    Sends an exchange to an endpoint using a supplied processor Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    processor - the processor which will populate the exchange before sending
    
    Returns:
    
    the result (see class javadoc)
  - request
```
Exchange request(String endpointUri,
                 Processor processor)
```
    Sends an exchange to an endpoint using a supplied processor Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is not thrown from this method, but you can access it from the returned exchange using Exchange.getException().
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    processor - the processor which will populate the exchange before sending
    
    Returns:
    
    the result (see class javadoc)
  - requestBody
```
Object requestBody(Object body)
            throws CamelExecutionException
```
    Sends the body to the default endpoint and returns the result content Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    body - the payload to send
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBody
```
<T> T requestBody(Object body,
                  Class<T> type)
           throws CamelExecutionException
```
    Sends the body to the default endpoint and returns the result content Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    body - the payload to send
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBody
```
Object requestBody(Endpoint endpoint,
                   Object body)
            throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    body - the payload
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBody
```
<T> T requestBody(Endpoint endpoint,
                  Object body,
                  Class<T> type)
           throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    body - the payload
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBody
```
Object requestBody(String endpointUri,
                   Object body)
            throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBody
```
<T> T requestBody(String endpointUri,
                  Object body,
                  Class<T> type)
           throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeader
```
Object requestBodyAndHeader(Object body,
                            String header,
                            Object headerValue)
                     throws CamelExecutionException
```
    Sends the body to the default endpoint and returns the result content Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    body - the payload
    
    header - the header name
    
    headerValue - the header value
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeader
```
Object requestBodyAndHeader(Endpoint endpoint,
                            Object body,
                            String header,
                            Object headerValue)
                     throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    body - the payload
    
    header - the header name
    
    headerValue - the header value
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeader
```
<T> T requestBodyAndHeader(Endpoint endpoint,
                           Object body,
                           String header,
                           Object headerValue,
                           Class<T> type)
                    throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the Endpoint to send to
    
    body - the payload
    
    header - the header name
    
    headerValue - the header value
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeader
```
Object requestBodyAndHeader(String endpointUri,
                            Object body,
                            String header,
                            Object headerValue)
                     throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload
    
    header - the header name
    
    headerValue - the header value
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeader
```
<T> T requestBodyAndHeader(String endpointUri,
                           Object body,
                           String header,
                           Object headerValue,
                           Class<T> type)
                    throws CamelExecutionException
```
    Send the body to an endpoint returning any result output body. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload
    
    header - the header name
    
    headerValue - the header value
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeaders
```
Object requestBodyAndHeaders(String endpointUri,
                             Object body,
                             Map<String,Object> headers)
                      throws CamelExecutionException
```
    Sends the body to an endpoint with the specified headers and header values. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload to send
    
    headers - headers
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeaders
```
<T> T requestBodyAndHeaders(String endpointUri,
                            Object body,
                            Map<String,Object> headers,
                            Class<T> type)
                     throws CamelExecutionException
```
    Sends the body to an endpoint with the specified headers and header values. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpointUri - the endpoint URI to send to
    
    body - the payload to send
    
    headers - headers
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeaders
```
Object requestBodyAndHeaders(Endpoint endpoint,
                             Object body,
                             Map<String,Object> headers)
                      throws CamelExecutionException
```
    Sends the body to an endpoint with the specified headers and header values. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the endpoint URI to send to
    
    body - the payload to send
    
    headers - headers
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeaders
```
Object requestBodyAndHeaders(Object body,
                             Map<String,Object> headers)
                      throws CamelExecutionException
```
    Sends the body to the default endpoint and returns the result content Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    body - the payload to send
    
    headers - headers
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - requestBodyAndHeaders
```
<T> T requestBodyAndHeaders(Endpoint endpoint,
                            Object body,
                            Map<String,Object> headers,
                            Class<T> type)
                     throws CamelExecutionException
```
    Sends the body to an endpoint with the specified headers and header values. Uses an ExchangePattern.InOut message exchange pattern.
    
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    endpoint - the endpoint URI to send to
    
    body - the payload to send
    
    headers - headers
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - setExecutorService
```
void setExecutorService(ExecutorService executorService)
```
    Sets a custom executor service to use for async messaging.
    
    Parameters:
    
    executorService - the executor service.
  - asyncSend
```
CompletableFuture<Exchange> asyncSend(String endpointUri,
                                      Exchange exchange)
```
    Sends an asynchronous exchange to the given endpoint.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    exchange - the exchange to send
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncSend
```
CompletableFuture<Exchange> asyncSend(String endpointUri,
                                      Processor processor)
```
    Sends an asynchronous exchange to the given endpoint.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    processor - the transformer used to populate the new exchange
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncSendBody
```
CompletableFuture<Object> asyncSendBody(String endpointUri,
                                        Object body)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOnly message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBody
```
CompletableFuture<Object> asyncRequestBody(String endpointUri,
                                           Object body)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBodyAndHeader
```
CompletableFuture<Object> asyncRequestBodyAndHeader(String endpointUri,
                                                    Object body,
                                                    String header,
                                                    Object headerValue)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    header - the header name
    
    headerValue - the header value
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBodyAndHeaders
```
CompletableFuture<Object> asyncRequestBodyAndHeaders(String endpointUri,
                                                     Object body,
                                                     Map<String,Object> headers)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    headers - headers
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBody
```
<T> CompletableFuture<T> asyncRequestBody(String endpointUri,
                                          Object body,
                                          Class<T> type)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    type - the expected response type
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBodyAndHeader
```
<T> CompletableFuture<T> asyncRequestBodyAndHeader(String endpointUri,
                                                   Object body,
                                                   String header,
                                                   Object headerValue,
                                                   Class<T> type)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    header - the header name
    
    headerValue - the header value
    
    type - the expected response type
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBodyAndHeaders
```
<T> CompletableFuture<T> asyncRequestBodyAndHeaders(String endpointUri,
                                                    Object body,
                                                    Map<String,Object> headers,
                                                    Class<T> type)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    headers - headers
    
    type - the expected response type
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncSend
```
CompletableFuture<Exchange> asyncSend(Endpoint endpoint,
                                      Exchange exchange)
```
    Sends an asynchronous exchange to the given endpoint.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    exchange - the exchange to send
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncSend
```
CompletableFuture<Exchange> asyncSend(Endpoint endpoint,
                                      Processor processor)
```
    Sends an asynchronous exchange to the given endpoint.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    processor - the transformer used to populate the new exchange
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncSendBody
```
CompletableFuture<Object> asyncSendBody(Endpoint endpoint,
                                        Object body)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOnly message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBody
```
CompletableFuture<Object> asyncRequestBody(Endpoint endpoint,
                                           Object body)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBodyAndHeader
```
CompletableFuture<Object> asyncRequestBodyAndHeader(Endpoint endpoint,
                                                    Object body,
                                                    String header,
                                                    Object headerValue)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    header - the header name
    
    headerValue - the header value
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBodyAndHeaders
```
CompletableFuture<Object> asyncRequestBodyAndHeaders(Endpoint endpoint,
                                                     Object body,
                                                     Map<String,Object> headers)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    headers - headers
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBody
```
<T> CompletableFuture<T> asyncRequestBody(Endpoint endpoint,
                                          Object body,
                                          Class<T> type)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    type - the expected response type
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBodyAndHeader
```
<T> CompletableFuture<T> asyncRequestBodyAndHeader(Endpoint endpoint,
                                                   Object body,
                                                   String header,
                                                   Object headerValue,
                                                   Class<T> type)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    header - the header name
    
    headerValue - the header value
    
    type - the expected response type
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncRequestBodyAndHeaders
```
<T> CompletableFuture<T> asyncRequestBodyAndHeaders(Endpoint endpoint,
                                                    Object body,
                                                    Map<String,Object> headers,
                                                    Class<T> type)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    headers - headers
    
    type - the expected response type
    
    Returns:
    
    a handle to be used to get the response in the future
  - extractFutureBody
```
<T> T extractFutureBody(Future<?> future,
                        Class<T> type)
                 throws CamelExecutionException
```
    Gets the response body from the future handle, will wait until the response is ready.
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    future - the handle to get the response
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    CamelExecutionException - if the processing of the exchange failed
  - extractFutureBody
```
<T> T extractFutureBody(Future<?> future,
                        long timeout,
                        TimeUnit unit,
                        Class<T> type)
                 throws TimeoutException,
                        CamelExecutionException
```
    Gets the response body from the future handle, will wait at most the given time for the response to be ready.
    Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a CamelExecutionException with the caused exception wrapped.
    
    Parameters:
    
    future - the handle to get the response
    
    timeout - the maximum time to wait
    
    unit - the time unit of the timeout argument
    
    type - the expected response type
    
    Returns:
    
    the result (see class javadoc)
    
    Throws:
    
    TimeoutException - if the wait timed out
    
    CamelExecutionException - if the processing of the exchange failed
  - asyncCallback
```
CompletableFuture<Exchange> asyncCallback(String endpointUri,
                                          Exchange exchange,
                                          Synchronization onCompletion)
```
    Sends an asynchronous exchange to the given endpoint.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    exchange - the exchange to send
    
    onCompletion - callback invoked when exchange has been completed
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncCallback
```
CompletableFuture<Exchange> asyncCallback(Endpoint endpoint,
                                          Exchange exchange,
                                          Synchronization onCompletion)
```
    Sends an asynchronous exchange to the given endpoint.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    exchange - the exchange to send
    
    onCompletion - callback invoked when exchange has been completed
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncCallback
```
CompletableFuture<Exchange> asyncCallback(String endpointUri,
                                          Processor processor,
                                          Synchronization onCompletion)
```
    Sends an asynchronous exchange to the given endpoint using a supplied processor.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    processor - the transformer used to populate the new exchange Processor to populate the exchange
    
    onCompletion - callback invoked when exchange has been completed
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncCallback
```
CompletableFuture<Exchange> asyncCallback(Endpoint endpoint,
                                          Processor processor,
                                          Synchronization onCompletion)
```
    Sends an asynchronous exchange to the given endpoint using a supplied processor.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    processor - the transformer used to populate the new exchange Processor to populate the exchange
    
    onCompletion - callback invoked when exchange has been completed
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncCallbackSendBody
```
CompletableFuture<Object> asyncCallbackSendBody(String endpointUri,
                                                Object body,
                                                Synchronization onCompletion)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOnly message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    onCompletion - callback invoked when exchange has been completed
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncCallbackSendBody
```
CompletableFuture<Object> asyncCallbackSendBody(Endpoint endpoint,
                                                Object body,
                                                Synchronization onCompletion)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOnly message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    onCompletion - callback invoked when exchange has been completed
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncCallbackRequestBody
```
CompletableFuture<Object> asyncCallbackRequestBody(String endpointUri,
                                                   Object body,
                                                   Synchronization onCompletion)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpointUri - the endpoint URI to send the exchange to
    
    body - the body to send
    
    onCompletion - callback invoked when exchange has been completed
    
    Returns:
    
    a handle to be used to get the response in the future
  - asyncCallbackRequestBody
```
CompletableFuture<Object> asyncCallbackRequestBody(Endpoint endpoint,
                                                   Object body,
                                                   Synchronization onCompletion)
```
    Sends an asynchronous body to the given endpoint. Uses an ExchangePattern.InOut message exchange pattern.
    
    Parameters:
    
    endpoint - the endpoint to send the exchange to
    
    body - the body to send
    
    onCompletion - callback invoked when exchange has been completed
    
    Returns:
    
    a handle to be used to get the response in the future

Interface ProducerTemplate

Method Summary

Methods inherited from interface org.apache.camel.Service

Method Detail

getCamelContext

getMaximumCacheSize

setMaximumCacheSize

getCurrentCacheSize

isThreadedAsyncMode

setThreadedAsyncMode

getDefaultEndpoint

setDefaultEndpoint

setDefaultEndpointUri

setEventNotifierEnabled

isEventNotifierEnabled

cleanUp

send

send

sendBody

sendBodyAndHeader

sendBodyAndProperty

sendBodyAndHeaders

send

send

send

send

send

send

send

sendBody

sendBody

sendBody

sendBody

sendBodyAndHeader

sendBodyAndHeader

sendBodyAndHeader

sendBodyAndHeader

sendBodyAndProperty

sendBodyAndProperty

sendBodyAndProperty

sendBodyAndProperty

sendBodyAndHeaders

sendBodyAndHeaders

sendBodyAndHeaders

sendBodyAndHeaders

request

request

requestBody

requestBody

requestBody

requestBody

requestBody

requestBody

requestBodyAndHeader

requestBodyAndHeader

requestBodyAndHeader

requestBodyAndHeader

requestBodyAndHeader

requestBodyAndHeaders

requestBodyAndHeaders

requestBodyAndHeaders

requestBodyAndHeaders

requestBodyAndHeaders

setExecutorService

asyncSend

asyncSend

asyncSendBody

asyncRequestBody

asyncRequestBodyAndHeader

asyncRequestBodyAndHeaders

asyncRequestBody

asyncRequestBodyAndHeader

asyncRequestBodyAndHeaders

asyncSend

asyncSend

asyncSendBody

asyncRequestBody

asyncRequestBodyAndHeader

asyncRequestBodyAndHeaders

asyncRequestBody