Package org.apache.camel.builder.endpoint.dsl

Interface DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder

  • All Superinterfaces:
    org.apache.camel.builder.EndpointProducerBuilder, org.apache.camel.EndpointProducerResolver
    Enclosing interface:
    DataSetTestEndpointBuilderFactory
    public static interface DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder
extends org.apache.camel.builder.EndpointProducerBuilder
    Builder for endpoint for the DataSet Test component.

    • Method Detail

      • anyOrder

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder anyOrder​(boolean anyOrder)
        Whether the expected messages should arrive in the same order or can be in any order. The option is a: <code>boolean</code> type. Default: false Group: producer
        Parameters:
        anyOrder - the value to set
        Returns:
        the dsl builder

      • anyOrder

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder anyOrder​(String anyOrder)
        Whether the expected messages should arrive in the same order or can be in any order. The option will be converted to a <code>boolean</code> type. Default: false Group: producer
        Parameters:
        anyOrder - the value to set
        Returns:
        the dsl builder

      • assertPeriod

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder assertPeriod​(long assertPeriod)
        Sets a grace period after which the mock endpoint will re-assert to ensure the preliminary assertion is still valid. This is used for example to assert that exactly a number of messages arrives. For example if expectedMessageCount(int) was set to 5, then the assertion is satisfied when 5 or more message arrives. To ensure that exactly 5 messages arrives, then you would need to wait a little period to ensure no further message arrives. This is what you can use this method for. By default this period is disabled. The option is a: <code>long</code> type. Group: producer
        Parameters:
        assertPeriod - the value to set
        Returns:
        the dsl builder

      • assertPeriod

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder assertPeriod​(String assertPeriod)
        Sets a grace period after which the mock endpoint will re-assert to ensure the preliminary assertion is still valid. This is used for example to assert that exactly a number of messages arrives. For example if expectedMessageCount(int) was set to 5, then the assertion is satisfied when 5 or more message arrives. To ensure that exactly 5 messages arrives, then you would need to wait a little period to ensure no further message arrives. This is what you can use this method for. By default this period is disabled. The option will be converted to a <code>long</code> type. Group: producer
        Parameters:
        assertPeriod - the value to set
        Returns:
        the dsl builder

      • delimiter

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder delimiter​(String delimiter)
        The split delimiter to use when split is enabled. By default the delimiter is new line based. The delimiter can be a regular expression. The option is a: <code>java.lang.String</code> type. Group: producer
        Parameters:
        delimiter - the value to set
        Returns:
        the dsl builder

      • expectedCount

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder expectedCount​(int expectedCount)
        Specifies the expected number of message exchanges that should be received by this endpoint. Beware: If you want to expect that 0 messages, then take extra care, as 0 matches when the tests starts, so you need to set a assert period time to let the test run for a while to make sure there are still no messages arrived; for that use setAssertPeriod(long). An alternative is to use NotifyBuilder, and use the notifier to know when Camel is done routing some messages, before you call the assertIsSatisfied() method on the mocks. This allows you to not use a fixed assert period, to speedup testing times. If you want to assert that exactly n'th message arrives to this mock endpoint, then see also the setAssertPeriod(long) method for further details. The option is a: <code>int</code> type. Default: -1 Group: producer
        Parameters:
        expectedCount - the value to set
        Returns:
        the dsl builder

      • expectedCount

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder expectedCount​(String expectedCount)
        Specifies the expected number of message exchanges that should be received by this endpoint. Beware: If you want to expect that 0 messages, then take extra care, as 0 matches when the tests starts, so you need to set a assert period time to let the test run for a while to make sure there are still no messages arrived; for that use setAssertPeriod(long). An alternative is to use NotifyBuilder, and use the notifier to know when Camel is done routing some messages, before you call the assertIsSatisfied() method on the mocks. This allows you to not use a fixed assert period, to speedup testing times. If you want to assert that exactly n'th message arrives to this mock endpoint, then see also the setAssertPeriod(long) method for further details. The option will be converted to a <code>int</code> type. Default: -1 Group: producer
        Parameters:
        expectedCount - the value to set
        Returns:
        the dsl builder

      • failFast

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder failFast​(boolean failFast)
        Sets whether assertIsSatisfied() should fail fast at the first detected failed expectation while it may otherwise wait for all expected messages to arrive before performing expectations verifications. Is by default true. Set to false to use behavior as in Camel 2.x. The option is a: <code>boolean</code> type. Default: false Group: producer
        Parameters:
        failFast - the value to set
        Returns:
        the dsl builder

      • failFast

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder failFast​(String failFast)
        Sets whether assertIsSatisfied() should fail fast at the first detected failed expectation while it may otherwise wait for all expected messages to arrive before performing expectations verifications. Is by default true. Set to false to use behavior as in Camel 2.x. The option will be converted to a <code>boolean</code> type. Default: false Group: producer
        Parameters:
        failFast - the value to set
        Returns:
        the dsl builder

      • lazyStartProducer

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder lazyStartProducer​(boolean lazyStartProducer)
        Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. The option is a: <code>boolean</code> type. Default: false Group: producer
        Parameters:
        lazyStartProducer - the value to set
        Returns:
        the dsl builder

      • lazyStartProducer

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder lazyStartProducer​(String lazyStartProducer)
        Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. The option will be converted to a <code>boolean</code> type. Default: false Group: producer
        Parameters:
        lazyStartProducer - the value to set
        Returns:
        the dsl builder

      • log

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder log​(boolean log)
        To turn on logging when the mock receives an incoming message. This will log only one time at INFO level for the incoming message. For more detailed logging then set the logger to DEBUG level for the org.apache.camel.component.mock.MockEndpoint class. The option is a: <code>boolean</code> type. Default: false Group: producer
        Parameters:
        log - the value to set
        Returns:
        the dsl builder

      • log

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder log​(String log)
        To turn on logging when the mock receives an incoming message. This will log only one time at INFO level for the incoming message. For more detailed logging then set the logger to DEBUG level for the org.apache.camel.component.mock.MockEndpoint class. The option will be converted to a <code>boolean</code> type. Default: false Group: producer
        Parameters:
        log - the value to set
        Returns:
        the dsl builder

      • reportGroup

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder reportGroup​(int reportGroup)
        A number that is used to turn on throughput logging based on groups of the size. The option is a: <code>int</code> type. Group: producer
        Parameters:
        reportGroup - the value to set
        Returns:
        the dsl builder

      • reportGroup

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder reportGroup​(String reportGroup)
        A number that is used to turn on throughput logging based on groups of the size. The option will be converted to a <code>int</code> type. Group: producer
        Parameters:
        reportGroup - the value to set
        Returns:
        the dsl builder

      • resultMinimumWaitTime

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder resultMinimumWaitTime​(long resultMinimumWaitTime)
        Sets the minimum expected amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied. The option is a: <code>long</code> type. Group: producer
        Parameters:
        resultMinimumWaitTime - the value to set
        Returns:
        the dsl builder

      • resultMinimumWaitTime

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder resultMinimumWaitTime​(String resultMinimumWaitTime)
        Sets the minimum expected amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied. The option will be converted to a <code>long</code> type. Group: producer
        Parameters:
        resultMinimumWaitTime - the value to set
        Returns:
        the dsl builder

      • resultWaitTime

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder resultWaitTime​(long resultWaitTime)
        Sets the maximum amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied. The option is a: <code>long</code> type. Group: producer
        Parameters:
        resultWaitTime - the value to set
        Returns:
        the dsl builder

      • resultWaitTime

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder resultWaitTime​(String resultWaitTime)
        Sets the maximum amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied. The option will be converted to a <code>long</code> type. Group: producer
        Parameters:
        resultWaitTime - the value to set
        Returns:
        the dsl builder

      • retainFirst

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder retainFirst​(int retainFirst)
        Specifies to only retain the first n'th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the first 10 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the first 10 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object...) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received. The option is a: <code>int</code> type. Default: -1 Group: producer
        Parameters:
        retainFirst - the value to set
        Returns:
        the dsl builder

      • retainFirst

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder retainFirst​(String retainFirst)
        Specifies to only retain the first n'th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the first 10 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the first 10 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object...) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received. The option will be converted to a <code>int</code> type. Default: -1 Group: producer
        Parameters:
        retainFirst - the value to set
        Returns:
        the dsl builder

      • retainLast

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder retainLast​(int retainLast)
        Specifies to only retain the last n'th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the last 20 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the last 20 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object...) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received. The option is a: <code>int</code> type. Default: -1 Group: producer
        Parameters:
        retainLast - the value to set
        Returns:
        the dsl builder

      • retainLast

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder retainLast​(String retainLast)
        Specifies to only retain the last n'th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the last 20 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the last 20 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object...) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received. The option will be converted to a <code>int</code> type. Default: -1 Group: producer
        Parameters:
        retainLast - the value to set
        Returns:
        the dsl builder

      • sleepForEmptyTest

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder sleepForEmptyTest​(long sleepForEmptyTest)
        Allows a sleep to be specified to wait to check that this endpoint really is empty when expectedMessageCount(int) is called with zero. The option is a: <code>long</code> type. Group: producer
        Parameters:
        sleepForEmptyTest - the value to set
        Returns:
        the dsl builder

      • sleepForEmptyTest

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder sleepForEmptyTest​(String sleepForEmptyTest)
        Allows a sleep to be specified to wait to check that this endpoint really is empty when expectedMessageCount(int) is called with zero. The option will be converted to a <code>long</code> type. Group: producer
        Parameters:
        sleepForEmptyTest - the value to set
        Returns:
        the dsl builder

      • split

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder split​(boolean split)
        If enabled the messages loaded from the test endpoint will be split using new line delimiters so each line is an expected message. For example to use a file endpoint to load a file where each line is an expected message. The option is a: <code>boolean</code> type. Default: false Group: producer
        Parameters:
        split - the value to set
        Returns:
        the dsl builder

      • split

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder split​(String split)
        If enabled the messages loaded from the test endpoint will be split using new line delimiters so each line is an expected message. For example to use a file endpoint to load a file where each line is an expected message. The option will be converted to a <code>boolean</code> type. Default: false Group: producer
        Parameters:
        split - the value to set
        Returns:
        the dsl builder

      • timeout

        default DataSetTestEndpointBuilderFactory.DataSetTestEndpointBuilder timeout​(long timeout)
        The timeout to use when polling for message bodies from the URI. The option is a: <code>long</code> type. Default: 2000 Group: producer
        Parameters:
        timeout - the value to set
        Returns:
        the dsl builder