Interface SmppEndpointBuilderFactory.SmppEndpointProducerBuilder
- All Superinterfaces:
org.apache.camel.builder.EndpointProducerBuilder
,org.apache.camel.EndpointProducerResolver
- All Known Subinterfaces:
SmppEndpointBuilderFactory.SmppEndpointBuilder
- Enclosing interface:
- SmppEndpointBuilderFactory
public static interface SmppEndpointBuilderFactory.SmppEndpointProducerBuilder
extends org.apache.camel.builder.EndpointProducerBuilder
Builder for endpoint producers for the SMPP component.
-
Method Summary
Modifier and TypeMethodDescriptionadvanced()
alphabet
(byte alphabet) Defines encoding of data according the SMPP 3.4 specification, section 5.2.19.Defines encoding of data according the SMPP 3.4 specification, section 5.2.19.dataCoding
(byte dataCoding) Defines the data coding according the SMPP 3.4 specification, section 5.2.19.dataCoding
(String dataCoding) Defines the data coding according the SMPP 3.4 specification, section 5.2.19.Defines the destination SME address.destAddrNpi
(byte destAddrNpi) Defines the type of number (TON) to be used in the SME destination address parameters.destAddrNpi
(String destAddrNpi) Defines the type of number (TON) to be used in the SME destination address parameters.destAddrTon
(byte destAddrTon) Defines the type of number (TON) to be used in the SME destination address parameters.destAddrTon
(String destAddrTon) Defines the type of number (TON) to be used in the SME destination address parameters.Defines the encoding scheme of the short message user data.httpProxyHost
(String httpProxyHost) If you need to tunnel SMPP through a HTTP proxy, set this attribute to the hostname or ip address of your HTTP proxy.httpProxyPassword
(String httpProxyPassword) If your HTTP proxy requires basic authentication, set this attribute to the password required for your HTTP proxy.httpProxyPort
(Integer httpProxyPort) If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy.httpProxyPort
(String httpProxyPort) If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy.httpProxyUsername
(String httpProxyUsername) If your HTTP proxy requires basic authentication, set this attribute to the username required for your HTTP proxy.initialReconnectDelay
(long initialReconnectDelay) Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost.initialReconnectDelay
(String initialReconnectDelay) Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost.lazySessionCreation
(boolean lazySessionCreation) Sessions can be lazily created to avoid exceptions, if the SMSC is not available when the Camel producer is started.lazySessionCreation
(String lazySessionCreation) Sessions can be lazily created to avoid exceptions, if the SMSC is not available when the Camel producer is started.maxReconnect
(int maxReconnect) Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response.maxReconnect
(String maxReconnect) Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response.messageReceiverRouteId
(String messageReceiverRouteId) Set this on producer in order to benefit from transceiver (TRX) binding type.numberingPlanIndicator
(byte numberingPlanIndicator) Defines the numeric plan indicator (NPI) to be used in the SME.numberingPlanIndicator
(String numberingPlanIndicator) Defines the numeric plan indicator (NPI) to be used in the SME.The password for connecting to SMSC server.priorityFlag
(byte priorityFlag) Allows the originating SME to assign a priority level to the short message.priorityFlag
(String priorityFlag) Allows the originating SME to assign a priority level to the short message.protocolId
(byte protocolId) The protocol id.protocolId
(String protocolId) The protocol id.proxyHeaders
(String proxyHeaders) These headers will be passed to the proxy server while establishing the connection.proxyHeaders
(Map<String, String> proxyHeaders) These headers will be passed to the proxy server while establishing the connection.reconnectDelay
(long reconnectDelay) Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed.reconnectDelay
(String reconnectDelay) Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed.registeredDelivery
(byte registeredDelivery) Is used to request an SMSC delivery receipt and/or SME originated acknowledgements.registeredDelivery
(String registeredDelivery) Is used to request an SMSC delivery receipt and/or SME originated acknowledgements.replaceIfPresentFlag
(byte replaceIfPresentFlag) Used to request the SMSC to replace a previously submitted message, that is still pending delivery.replaceIfPresentFlag
(String replaceIfPresentFlag) Used to request the SMSC to replace a previously submitted message, that is still pending delivery.serviceType
(String serviceType) The service type parameter can be used to indicate the SMS Application service associated with the message.sourceAddr
(String sourceAddr) Defines the address of SME (Short Message Entity) which originated this message.sourceAddrNpi
(byte sourceAddrNpi) Defines the numeric plan indicator (NPI) to be used in the SME originator address parameters.sourceAddrNpi
(String sourceAddrNpi) Defines the numeric plan indicator (NPI) to be used in the SME originator address parameters.sourceAddrTon
(byte sourceAddrTon) Defines the type of number (TON) to be used in the SME originator address parameters.sourceAddrTon
(String sourceAddrTon) Defines the type of number (TON) to be used in the SME originator address parameters.splittingPolicy
(String splittingPolicy) You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC.splittingPolicy
(org.apache.camel.component.smpp.SmppSplittingPolicy splittingPolicy) You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC.The system id (username) for connecting to SMSC server.systemType
(String systemType) This parameter is used to categorize the type of ESME (External Short Message Entity) that is binding to the SMSC (max.typeOfNumber
(byte typeOfNumber) Defines the type of number (TON) to be used in the SME.typeOfNumber
(String typeOfNumber) Defines the type of number (TON) to be used in the SME.usingSSL
(boolean usingSSL) Whether using SSL with the smpps protocol.Whether using SSL with the smpps protocol.Methods inherited from interface org.apache.camel.builder.EndpointProducerBuilder
doSetMultiValueProperties, doSetMultiValueProperty, doSetProperty, expr, getRawUri, getUri
Methods inherited from interface org.apache.camel.EndpointProducerResolver
resolve, resolve
-
Method Details
-
advanced
-
initialReconnectDelay
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder initialReconnectDelay(long initialReconnectDelay) Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost. The option is a: <code>long</code> type. Default: 5000 Group: common- Parameters:
initialReconnectDelay
- the value to set- Returns:
- the dsl builder
-
initialReconnectDelay
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder initialReconnectDelay(String initialReconnectDelay) Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost. The option will be converted to a <code>long</code> type. Default: 5000 Group: common- Parameters:
initialReconnectDelay
- the value to set- Returns:
- the dsl builder
-
maxReconnect
Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response. The option is a: <code>int</code> type. Default: 2147483647 Group: common- Parameters:
maxReconnect
- the value to set- Returns:
- the dsl builder
-
maxReconnect
Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response. The option will be converted to a <code>int</code> type. Default: 2147483647 Group: common- Parameters:
maxReconnect
- the value to set- Returns:
- the dsl builder
-
reconnectDelay
Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed. The option is a: <code>long</code> type. Default: 5000 Group: common- Parameters:
reconnectDelay
- the value to set- Returns:
- the dsl builder
-
reconnectDelay
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder reconnectDelay(String reconnectDelay) Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed. The option will be converted to a <code>long</code> type. Default: 5000 Group: common- Parameters:
reconnectDelay
- the value to set- Returns:
- the dsl builder
-
splittingPolicy
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder splittingPolicy(org.apache.camel.component.smpp.SmppSplittingPolicy splittingPolicy) You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC. Some carriers drop subsequent fragments so this reduces load on the SMPP connection sending parts of a message that will never be delivered. REJECT - if a message would need to be split, it is rejected with an SMPP NegativeResponseException and the reason code signifying the message is too long. The option is a: <code>org.apache.camel.component.smpp.SmppSplittingPolicy</code> type. Default: ALLOW Group: common- Parameters:
splittingPolicy
- the value to set- Returns:
- the dsl builder
-
splittingPolicy
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder splittingPolicy(String splittingPolicy) You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC. Some carriers drop subsequent fragments so this reduces load on the SMPP connection sending parts of a message that will never be delivered. REJECT - if a message would need to be split, it is rejected with an SMPP NegativeResponseException and the reason code signifying the message is too long. The option will be converted to a <code>org.apache.camel.component.smpp.SmppSplittingPolicy</code> type. Default: ALLOW Group: common- Parameters:
splittingPolicy
- the value to set- Returns:
- the dsl builder
-
systemType
This parameter is used to categorize the type of ESME (External Short Message Entity) that is binding to the SMSC (max. 13 characters). The option is a: <code>java.lang.String</code> type. Group: common- Parameters:
systemType
- the value to set- Returns:
- the dsl builder
-
destAddr
Defines the destination SME address. For mobile terminated messages, this is the directory number of the recipient MS. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The option is a: <code>java.lang.String</code> type. Default: 1717 Group: producer- Parameters:
destAddr
- the value to set- Returns:
- the dsl builder
-
destAddrNpi
Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer- Parameters:
destAddrNpi
- the value to set- Returns:
- the dsl builder
-
destAddrNpi
Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
destAddrNpi
- the value to set- Returns:
- the dsl builder
-
destAddrTon
Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer- Parameters:
destAddrTon
- the value to set- Returns:
- the dsl builder
-
destAddrTon
Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
destAddrTon
- the value to set- Returns:
- the dsl builder
-
lazySessionCreation
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder lazySessionCreation(boolean lazySessionCreation) Sessions can be lazily created to avoid exceptions, if the SMSC is not available when the Camel producer is started. Camel will check the in message headers 'CamelSmppSystemId' and 'CamelSmppPassword' of the first exchange. If they are present, Camel will use these data to connect to the SMSC. The option is a: <code>boolean</code> type. Default: false Group: producer- Parameters:
lazySessionCreation
- the value to set- Returns:
- the dsl builder
-
lazySessionCreation
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder lazySessionCreation(String lazySessionCreation) Sessions can be lazily created to avoid exceptions, if the SMSC is not available when the Camel producer is started. Camel will check the in message headers 'CamelSmppSystemId' and 'CamelSmppPassword' of the first exchange. If they are present, Camel will use these data to connect to the SMSC. The option will be converted to a <code>boolean</code> type. Default: false Group: producer- Parameters:
lazySessionCreation
- the value to set- Returns:
- the dsl builder
-
messageReceiverRouteId
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder messageReceiverRouteId(String messageReceiverRouteId) Set this on producer in order to benefit from transceiver (TRX) binding type. So once set, you don't need to define an 'SMTPP consumer' endpoint anymore. You would set this to a 'Direct consumer' endpoint instead. DISCALIMER: This feature is only tested with 'Direct consumer' endpoint. The behavior with any other consumer type is unknown and not tested. The option is a: <code>java.lang.String</code> type. Group: producer- Parameters:
messageReceiverRouteId
- the value to set- Returns:
- the dsl builder
-
numberingPlanIndicator
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder numberingPlanIndicator(byte numberingPlanIndicator) Defines the numeric plan indicator (NPI) to be used in the SME. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer- Parameters:
numberingPlanIndicator
- the value to set- Returns:
- the dsl builder
-
numberingPlanIndicator
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder numberingPlanIndicator(String numberingPlanIndicator) Defines the numeric plan indicator (NPI) to be used in the SME. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
numberingPlanIndicator
- the value to set- Returns:
- the dsl builder
-
priorityFlag
Allows the originating SME to assign a priority level to the short message. Only for SubmitSm and SubmitMulti. Four Priority Levels are supported: 0: Level 0 (lowest) priority 1: Level 1 priority 2: Level 2 priority 3: Level 3 (highest) priority. The option is a: <code>byte</code> type. Group: producer- Parameters:
priorityFlag
- the value to set- Returns:
- the dsl builder
-
priorityFlag
Allows the originating SME to assign a priority level to the short message. Only for SubmitSm and SubmitMulti. Four Priority Levels are supported: 0: Level 0 (lowest) priority 1: Level 1 priority 2: Level 2 priority 3: Level 3 (highest) priority. The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
priorityFlag
- the value to set- Returns:
- the dsl builder
-
protocolId
The protocol id. The option is a: <code>byte</code> type. Group: producer- Parameters:
protocolId
- the value to set- Returns:
- the dsl builder
-
protocolId
The protocol id. The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
protocolId
- the value to set- Returns:
- the dsl builder
-
registeredDelivery
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder registeredDelivery(byte registeredDelivery) Is used to request an SMSC delivery receipt and/or SME originated acknowledgements. The following values are defined: 0: No SMSC delivery receipt requested. 1: SMSC delivery receipt requested where final delivery outcome is success or failure. 2: SMSC delivery receipt requested where the final delivery outcome is delivery failure. The option is a: <code>byte</code> type. Group: producer- Parameters:
registeredDelivery
- the value to set- Returns:
- the dsl builder
-
registeredDelivery
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder registeredDelivery(String registeredDelivery) Is used to request an SMSC delivery receipt and/or SME originated acknowledgements. The following values are defined: 0: No SMSC delivery receipt requested. 1: SMSC delivery receipt requested where final delivery outcome is success or failure. 2: SMSC delivery receipt requested where the final delivery outcome is delivery failure. The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
registeredDelivery
- the value to set- Returns:
- the dsl builder
-
replaceIfPresentFlag
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder replaceIfPresentFlag(byte replaceIfPresentFlag) Used to request the SMSC to replace a previously submitted message, that is still pending delivery. The SMSC will replace an existing message provided that the source address, destination address and service type match the same fields in the new message. The following replace if present flag values are defined: 0: Don't replace 1: Replace. The option is a: <code>byte</code> type. Group: producer- Parameters:
replaceIfPresentFlag
- the value to set- Returns:
- the dsl builder
-
replaceIfPresentFlag
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder replaceIfPresentFlag(String replaceIfPresentFlag) Used to request the SMSC to replace a previously submitted message, that is still pending delivery. The SMSC will replace an existing message provided that the source address, destination address and service type match the same fields in the new message. The following replace if present flag values are defined: 0: Don't replace 1: Replace. The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
replaceIfPresentFlag
- the value to set- Returns:
- the dsl builder
-
serviceType
The service type parameter can be used to indicate the SMS Application service associated with the message. The following generic service_types are defined: CMT: Cellular Messaging CPT: Cellular Paging VMN: Voice Mail Notification VMA: Voice Mail Alerting WAP: Wireless Application Protocol USSD: Unstructured Supplementary Services Data. The option is a: <code>java.lang.String</code> type. Group: producer- Parameters:
serviceType
- the value to set- Returns:
- the dsl builder
-
sourceAddr
Defines the address of SME (Short Message Entity) which originated this message. The option is a: <code>java.lang.String</code> type. Default: 1616 Group: producer- Parameters:
sourceAddr
- the value to set- Returns:
- the dsl builder
-
sourceAddrNpi
Defines the numeric plan indicator (NPI) to be used in the SME originator address parameters. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer- Parameters:
sourceAddrNpi
- the value to set- Returns:
- the dsl builder
-
sourceAddrNpi
Defines the numeric plan indicator (NPI) to be used in the SME originator address parameters. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
sourceAddrNpi
- the value to set- Returns:
- the dsl builder
-
sourceAddrTon
Defines the type of number (TON) to be used in the SME originator address parameters. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer- Parameters:
sourceAddrTon
- the value to set- Returns:
- the dsl builder
-
sourceAddrTon
Defines the type of number (TON) to be used in the SME originator address parameters. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
sourceAddrTon
- the value to set- Returns:
- the dsl builder
-
typeOfNumber
Defines the type of number (TON) to be used in the SME. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer- Parameters:
typeOfNumber
- the value to set- Returns:
- the dsl builder
-
typeOfNumber
Defines the type of number (TON) to be used in the SME. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option will be converted to a <code>byte</code> type. Group: producer- Parameters:
typeOfNumber
- the value to set- Returns:
- the dsl builder
-
alphabet
Defines encoding of data according the SMPP 3.4 specification, section 5.2.19. 0: SMSC Default Alphabet 4: 8 bit Alphabet 8: UCS2 Alphabet. The option is a: <code>byte</code> type. Group: codec- Parameters:
alphabet
- the value to set- Returns:
- the dsl builder
-
alphabet
Defines encoding of data according the SMPP 3.4 specification, section 5.2.19. 0: SMSC Default Alphabet 4: 8 bit Alphabet 8: UCS2 Alphabet. The option will be converted to a <code>byte</code> type. Group: codec- Parameters:
alphabet
- the value to set- Returns:
- the dsl builder
-
dataCoding
Defines the data coding according the SMPP 3.4 specification, section 5.2.19. Example data encodings are: 0: SMSC Default Alphabet 3: Latin 1 (ISO-8859-1) 4: Octet unspecified (8-bit binary) 8: UCS2 (ISO/IEC-10646) 13: Extended Kanji JIS(X 0212-1990). The option is a: <code>byte</code> type. Group: codec- Parameters:
dataCoding
- the value to set- Returns:
- the dsl builder
-
dataCoding
Defines the data coding according the SMPP 3.4 specification, section 5.2.19. Example data encodings are: 0: SMSC Default Alphabet 3: Latin 1 (ISO-8859-1) 4: Octet unspecified (8-bit binary) 8: UCS2 (ISO/IEC-10646) 13: Extended Kanji JIS(X 0212-1990). The option will be converted to a <code>byte</code> type. Group: codec- Parameters:
dataCoding
- the value to set- Returns:
- the dsl builder
-
encoding
Defines the encoding scheme of the short message user data. Only for SubmitSm, ReplaceSm and SubmitMulti. The option is a: <code>java.lang.String</code> type. Default: ISO-8859-1 Group: codec- Parameters:
encoding
- the value to set- Returns:
- the dsl builder
-
httpProxyHost
If you need to tunnel SMPP through a HTTP proxy, set this attribute to the hostname or ip address of your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy- Parameters:
httpProxyHost
- the value to set- Returns:
- the dsl builder
-
httpProxyPassword
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder httpProxyPassword(String httpProxyPassword) If your HTTP proxy requires basic authentication, set this attribute to the password required for your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy- Parameters:
httpProxyPassword
- the value to set- Returns:
- the dsl builder
-
httpProxyPort
If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy. The option is a: <code>java.lang.Integer</code> type. Default: 3128 Group: proxy- Parameters:
httpProxyPort
- the value to set- Returns:
- the dsl builder
-
httpProxyPort
If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy. The option will be converted to a <code>java.lang.Integer</code> type. Default: 3128 Group: proxy- Parameters:
httpProxyPort
- the value to set- Returns:
- the dsl builder
-
httpProxyUsername
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder httpProxyUsername(String httpProxyUsername) If your HTTP proxy requires basic authentication, set this attribute to the username required for your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy- Parameters:
httpProxyUsername
- the value to set- Returns:
- the dsl builder
-
proxyHeaders
default SmppEndpointBuilderFactory.SmppEndpointProducerBuilder proxyHeaders(Map<String, String> proxyHeaders) These headers will be passed to the proxy server while establishing the connection. The option is a: <code>java.util.Map<java.lang.String, java.lang.String></code> type. Group: proxy- Parameters:
proxyHeaders
- the value to set- Returns:
- the dsl builder
-
proxyHeaders
These headers will be passed to the proxy server while establishing the connection. The option will be converted to a <code>java.util.Map<java.lang.String, java.lang.String></code> type. Group: proxy- Parameters:
proxyHeaders
- the value to set- Returns:
- the dsl builder
-
password
The password for connecting to SMSC server. The option is a: <code>java.lang.String</code> type. Group: security- Parameters:
password
- the value to set- Returns:
- the dsl builder
-
systemId
The system id (username) for connecting to SMSC server. The option is a: <code>java.lang.String</code> type. Default: smppclient Group: security- Parameters:
systemId
- the value to set- Returns:
- the dsl builder
-
usingSSL
Whether using SSL with the smpps protocol. The option is a: <code>boolean</code> type. Default: false Group: security- Parameters:
usingSSL
- the value to set- Returns:
- the dsl builder
-
usingSSL
Whether using SSL with the smpps protocol. The option will be converted to a <code>boolean</code> type. Default: false Group: security- Parameters:
usingSSL
- the value to set- Returns:
- the dsl builder
-