Interface SshEndpointBuilderFactory.SshEndpointConsumerBuilder
- All Superinterfaces:
org.apache.camel.builder.EndpointConsumerBuilder
,org.apache.camel.EndpointConsumerResolver
- All Known Subinterfaces:
SshEndpointBuilderFactory.SshEndpointBuilder
- Enclosing interface:
- SshEndpointBuilderFactory
public static interface SshEndpointBuilderFactory.SshEndpointConsumerBuilder
extends org.apache.camel.builder.EndpointConsumerBuilder
Builder for endpoint consumers for the SSH component.
-
Method Summary
Modifier and TypeMethodDescriptionadvanced()
backoffErrorThreshold
(int backoffErrorThreshold) The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.backoffErrorThreshold
(String backoffErrorThreshold) The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.backoffIdleThreshold
(int backoffIdleThreshold) The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.backoffIdleThreshold
(String backoffIdleThreshold) The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.backoffMultiplier
(int backoffMultiplier) To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row.backoffMultiplier
(String backoffMultiplier) To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row.certResource
(String certResource) Sets the resource path of the certificate to use for Authentication.certResourcePassword
(String certResourcePassword) Sets the password to use in loading certResource, if certResource is an encrypted key.delay
(long delay) Milliseconds before the next poll.Milliseconds before the next poll.failOnUnknownHost
(boolean failOnUnknownHost) Specifies whether a connection to an unknown host should fail or not.failOnUnknownHost
(String failOnUnknownHost) Specifies whether a connection to an unknown host should fail or not.greedy
(boolean greedy) If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.initialDelay
(long initialDelay) Milliseconds before the first poll starts.initialDelay
(String initialDelay) Milliseconds before the first poll starts.keyPairProvider
(String keyPairProvider) Sets the KeyPairProvider reference to use when connecting using Certificates to the remote SSH Server.keyPairProvider
(org.apache.sshd.common.keyprovider.KeyPairProvider keyPairProvider) Sets the KeyPairProvider reference to use when connecting using Certificates to the remote SSH Server.Sets the key type to pass to the KeyPairProvider as part of authentication.knownHostsResource
(String knownHostsResource) Sets the resource path for a known_hosts file.Sets the password to use in connecting to remote SSH server.pollCommand
(String pollCommand) Sets the command string to send to the remote SSH server during every poll cycle.repeatCount
(long repeatCount) Specifies a maximum limit of number of fires.repeatCount
(String repeatCount) Specifies a maximum limit of number of fires.runLoggingLevel
(String runLoggingLevel) The consumer logs a start/complete log line when it polls.runLoggingLevel
(org.apache.camel.LoggingLevel runLoggingLevel) The consumer logs a start/complete log line when it polls.scheduledExecutorService
(String scheduledExecutorService) Allows for configuring a custom/shared thread pool to use for the consumer.scheduledExecutorService
(ScheduledExecutorService scheduledExecutorService) Allows for configuring a custom/shared thread pool to use for the consumer.To use a cron scheduler from either camel-spring or camel-quartz component.To use a cron scheduler from either camel-spring or camel-quartz component.schedulerProperties
(String key, Object value) To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.schedulerProperties
(Map values) To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.sendEmptyMessageWhenIdle
(boolean sendEmptyMessageWhenIdle) If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.sendEmptyMessageWhenIdle
(String sendEmptyMessageWhenIdle) If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.startScheduler
(boolean startScheduler) Whether the scheduler should be auto started.startScheduler
(String startScheduler) Whether the scheduler should be auto started.timeout
(long timeout) Sets the timeout in milliseconds to wait in establishing the remote SSH server connection.Sets the timeout in milliseconds to wait in establishing the remote SSH server connection.Time unit for initialDelay and delay options.Time unit for initialDelay and delay options.useFixedDelay
(boolean useFixedDelay) Controls if fixed delay or fixed rate is used.useFixedDelay
(String useFixedDelay) Controls if fixed delay or fixed rate is used.Sets the username to use in logging into the remote SSH server.Methods inherited from interface org.apache.camel.builder.EndpointConsumerBuilder
doSetMultiValueProperties, doSetMultiValueProperty, doSetProperty, expr, getRawUri, getUri
Methods inherited from interface org.apache.camel.EndpointConsumerResolver
resolve, resolve
-
Method Details
-
advanced
-
failOnUnknownHost
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder failOnUnknownHost(boolean failOnUnknownHost) Specifies whether a connection to an unknown host should fail or not. This value is only checked when the property knownHosts is set. The option is a: <code>boolean</code> type. Default: false Group: common- Parameters:
failOnUnknownHost
- the value to set- Returns:
- the dsl builder
-
failOnUnknownHost
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder failOnUnknownHost(String failOnUnknownHost) Specifies whether a connection to an unknown host should fail or not. This value is only checked when the property knownHosts is set. The option will be converted to a <code>boolean</code> type. Default: false Group: common- Parameters:
failOnUnknownHost
- the value to set- Returns:
- the dsl builder
-
knownHostsResource
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder knownHostsResource(String knownHostsResource) Sets the resource path for a known_hosts file. The option is a: <code>java.lang.String</code> type. Group: common- Parameters:
knownHostsResource
- the value to set- Returns:
- the dsl builder
-
timeout
Sets the timeout in milliseconds to wait in establishing the remote SSH server connection. Defaults to 30000 milliseconds. The option is a: <code>long</code> type. Default: 30000 Group: common- Parameters:
timeout
- the value to set- Returns:
- the dsl builder
-
timeout
Sets the timeout in milliseconds to wait in establishing the remote SSH server connection. Defaults to 30000 milliseconds. The option will be converted to a <code>long</code> type. Default: 30000 Group: common- Parameters:
timeout
- the value to set- Returns:
- the dsl builder
-
pollCommand
Sets the command string to send to the remote SSH server during every poll cycle. Only works with camel-ssh component being used as a consumer, i.e. from(ssh://...) You may need to end your command with a newline, and that must be URL encoded %0A. The option is a: <code>java.lang.String</code> type. Group: consumer- Parameters:
pollCommand
- the value to set- Returns:
- the dsl builder
-
sendEmptyMessageWhenIdle
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder sendEmptyMessageWhenIdle(boolean sendEmptyMessageWhenIdle) If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead. The option is a: <code>boolean</code> type. Default: false Group: consumer- Parameters:
sendEmptyMessageWhenIdle
- the value to set- Returns:
- the dsl builder
-
sendEmptyMessageWhenIdle
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder sendEmptyMessageWhenIdle(String sendEmptyMessageWhenIdle) If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead. The option will be converted to a <code>boolean</code> type. Default: false Group: consumer- Parameters:
sendEmptyMessageWhenIdle
- the value to set- Returns:
- the dsl builder
-
backoffErrorThreshold
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder backoffErrorThreshold(int backoffErrorThreshold) The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in. The option is a: <code>int</code> type. Group: scheduler- Parameters:
backoffErrorThreshold
- the value to set- Returns:
- the dsl builder
-
backoffErrorThreshold
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder backoffErrorThreshold(String backoffErrorThreshold) The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in. The option will be converted to a <code>int</code> type. Group: scheduler- Parameters:
backoffErrorThreshold
- the value to set- Returns:
- the dsl builder
-
backoffIdleThreshold
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder backoffIdleThreshold(int backoffIdleThreshold) The number of subsequent idle polls that should happen before the backoffMultipler should kick-in. The option is a: <code>int</code> type. Group: scheduler- Parameters:
backoffIdleThreshold
- the value to set- Returns:
- the dsl builder
-
backoffIdleThreshold
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder backoffIdleThreshold(String backoffIdleThreshold) The number of subsequent idle polls that should happen before the backoffMultipler should kick-in. The option will be converted to a <code>int</code> type. Group: scheduler- Parameters:
backoffIdleThreshold
- the value to set- Returns:
- the dsl builder
-
backoffMultiplier
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder backoffMultiplier(int backoffMultiplier) To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured. The option is a: <code>int</code> type. Group: scheduler- Parameters:
backoffMultiplier
- the value to set- Returns:
- the dsl builder
-
backoffMultiplier
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder backoffMultiplier(String backoffMultiplier) To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured. The option will be converted to a <code>int</code> type. Group: scheduler- Parameters:
backoffMultiplier
- the value to set- Returns:
- the dsl builder
-
delay
Milliseconds before the next poll. The option is a: <code>long</code> type. Default: 500 Group: scheduler- Parameters:
delay
- the value to set- Returns:
- the dsl builder
-
delay
Milliseconds before the next poll. The option will be converted to a <code>long</code> type. Default: 500 Group: scheduler- Parameters:
delay
- the value to set- Returns:
- the dsl builder
-
greedy
If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages. The option is a: <code>boolean</code> type. Default: false Group: scheduler- Parameters:
greedy
- the value to set- Returns:
- the dsl builder
-
greedy
If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages. The option will be converted to a <code>boolean</code> type. Default: false Group: scheduler- Parameters:
greedy
- the value to set- Returns:
- the dsl builder
-
initialDelay
Milliseconds before the first poll starts. The option is a: <code>long</code> type. Default: 1000 Group: scheduler- Parameters:
initialDelay
- the value to set- Returns:
- the dsl builder
-
initialDelay
Milliseconds before the first poll starts. The option will be converted to a <code>long</code> type. Default: 1000 Group: scheduler- Parameters:
initialDelay
- the value to set- Returns:
- the dsl builder
-
repeatCount
Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever. The option is a: <code>long</code> type. Default: 0 Group: scheduler- Parameters:
repeatCount
- the value to set- Returns:
- the dsl builder
-
repeatCount
Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever. The option will be converted to a <code>long</code> type. Default: 0 Group: scheduler- Parameters:
repeatCount
- the value to set- Returns:
- the dsl builder
-
runLoggingLevel
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder runLoggingLevel(org.apache.camel.LoggingLevel runLoggingLevel) The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. The option is a: <code>org.apache.camel.LoggingLevel</code> type. Default: TRACE Group: scheduler- Parameters:
runLoggingLevel
- the value to set- Returns:
- the dsl builder
-
runLoggingLevel
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder runLoggingLevel(String runLoggingLevel) The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. The option will be converted to a <code>org.apache.camel.LoggingLevel</code> type. Default: TRACE Group: scheduler- Parameters:
runLoggingLevel
- the value to set- Returns:
- the dsl builder
-
scheduledExecutorService
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder scheduledExecutorService(ScheduledExecutorService scheduledExecutorService) Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool. The option is a: <code>java.util.concurrent.ScheduledExecutorService</code> type. Group: scheduler- Parameters:
scheduledExecutorService
- the value to set- Returns:
- the dsl builder
-
scheduledExecutorService
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder scheduledExecutorService(String scheduledExecutorService) Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool. The option will be converted to a <code>java.util.concurrent.ScheduledExecutorService</code> type. Group: scheduler- Parameters:
scheduledExecutorService
- the value to set- Returns:
- the dsl builder
-
scheduler
To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler. The option is a: <code>java.lang.Object</code> type. Default: none Group: scheduler- Parameters:
scheduler
- the value to set- Returns:
- the dsl builder
-
scheduler
To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler. The option will be converted to a <code>java.lang.Object</code> type. Default: none Group: scheduler- Parameters:
scheduler
- the value to set- Returns:
- the dsl builder
-
schedulerProperties
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder schedulerProperties(String key, Object value) To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler. The option is a: <code>java.util.Map<java.lang.String, java.lang.Object></code> type. The option is multivalued, and you can use the schedulerProperties(String, Object) method to add a value (call the method multiple times to set more values). Group: scheduler- Parameters:
key
- the option keyvalue
- the option value- Returns:
- the dsl builder
-
schedulerProperties
To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler. The option is a: <code>java.util.Map<java.lang.String, java.lang.Object></code> type. The option is multivalued, and you can use the schedulerProperties(String, Object) method to add a value (call the method multiple times to set more values). Group: scheduler- Parameters:
values
- the values- Returns:
- the dsl builder
-
startScheduler
Whether the scheduler should be auto started. The option is a: <code>boolean</code> type. Default: true Group: scheduler- Parameters:
startScheduler
- the value to set- Returns:
- the dsl builder
-
startScheduler
Whether the scheduler should be auto started. The option will be converted to a <code>boolean</code> type. Default: true Group: scheduler- Parameters:
startScheduler
- the value to set- Returns:
- the dsl builder
-
timeUnit
Time unit for initialDelay and delay options. The option is a: <code>java.util.concurrent.TimeUnit</code> type. Default: MILLISECONDS Group: scheduler- Parameters:
timeUnit
- the value to set- Returns:
- the dsl builder
-
timeUnit
Time unit for initialDelay and delay options. The option will be converted to a <code>java.util.concurrent.TimeUnit</code> type. Default: MILLISECONDS Group: scheduler- Parameters:
timeUnit
- the value to set- Returns:
- the dsl builder
-
useFixedDelay
Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details. The option is a: <code>boolean</code> type. Default: true Group: scheduler- Parameters:
useFixedDelay
- the value to set- Returns:
- the dsl builder
-
useFixedDelay
Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details. The option will be converted to a <code>boolean</code> type. Default: true Group: scheduler- Parameters:
useFixedDelay
- the value to set- Returns:
- the dsl builder
-
certResource
Sets the resource path of the certificate to use for Authentication. Will use ResourceHelperKeyPairProvider to resolve file based certificate, and depends on keyType setting. The option is a: <code>java.lang.String</code> type. Group: security- Parameters:
certResource
- the value to set- Returns:
- the dsl builder
-
certResourcePassword
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder certResourcePassword(String certResourcePassword) Sets the password to use in loading certResource, if certResource is an encrypted key. The option is a: <code>java.lang.String</code> type. Group: security- Parameters:
certResourcePassword
- the value to set- Returns:
- the dsl builder
-
keyPairProvider
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder keyPairProvider(org.apache.sshd.common.keyprovider.KeyPairProvider keyPairProvider) Sets the KeyPairProvider reference to use when connecting using Certificates to the remote SSH Server. The option is a: <code>org.apache.sshd.common.keyprovider.KeyPairProvider</code> type. Group: security- Parameters:
keyPairProvider
- the value to set- Returns:
- the dsl builder
-
keyPairProvider
default SshEndpointBuilderFactory.SshEndpointConsumerBuilder keyPairProvider(String keyPairProvider) Sets the KeyPairProvider reference to use when connecting using Certificates to the remote SSH Server. The option will be converted to a <code>org.apache.sshd.common.keyprovider.KeyPairProvider</code> type. Group: security- Parameters:
keyPairProvider
- the value to set- Returns:
- the dsl builder
-
keyType
Sets the key type to pass to the KeyPairProvider as part of authentication. KeyPairProvider.loadKey(...) will be passed this value. From Camel 3.0.0 / 2.25.0, by default Camel will select the first available KeyPair that is loaded. Prior to this, a KeyType of 'ssh-rsa' was enforced by default. The option is a: <code>java.lang.String</code> type. Group: security- Parameters:
keyType
- the value to set- Returns:
- the dsl builder
-
password
Sets the password to use in connecting to remote SSH server. Requires keyPairProvider to be set to null. The option is a: <code>java.lang.String</code> type. Group: security- Parameters:
password
- the value to set- Returns:
- the dsl builder
-
username
Sets the username to use in logging into the remote SSH server. The option is a: <code>java.lang.String</code> type. Group: security- Parameters:
username
- the value to set- Returns:
- the dsl builder
-