TcpCommunicationSpi (Ignite 2.10.0)

java.lang.Object
- org.apache.ignite.spi.IgniteSpiAdapter
- - org.apache.ignite.spi.communication.tcp.internal.TcpCommunicationConfigInitializer
  - - org.apache.ignite.spi.communication.tcp.TcpCommunicationSpi

All Implemented Interfaces:

CommunicationSpi<Message>, IgniteSpi
```
@IgniteSpiMultipleInstancesSupport(value=true)
 @IgniteSpiConsistencyChecked(optional=false)
public class TcpCommunicationSpi
extends TcpCommunicationConfigInitializer
```
TcpCommunicationSpi is default communication SPI which uses TCP/IP protocol and Java NIO to communicate with other nodes.
To enable communication with other nodes, this SPI adds ATTR_ADDRS and ATTR_PORT local node attributes (see ClusterNode.attributes().
At startup, this SPI tries to start listening to local port specified by TcpCommunicationConfigInitializer.setLocalPort(int) method. If local port is occupied, then SPI will automatically increment the port number until it can successfully bind for listening. TcpCommunicationConfigInitializer.setLocalPortRange(int) configuration parameter controls maximum number of ports that SPI will try before it fails. Port range comes very handy when starting multiple grid nodes on the same machine or even in the same VM. In this case all nodes can be brought up without a single change in configuration.
This SPI caches connections to remote nodes so it does not have to reconnect every time a message is sent. By default, idle connections are kept active for DFLT_IDLE_CONN_TIMEOUT period and then are closed. Use TcpCommunicationConfigInitializer.setIdleConnectionTimeout(long) configuration parameter to configure you own idle connection timeout.
Failure Detection
Configuration defaults (see Configuration section below and IgniteConfiguration.getFailureDetectionTimeout()) for details) are chosen to make possible for communication SPI work reliably on most of hardware and virtual deployments, but this has made failure detection time worse.
If it's needed to tune failure detection then it's highly recommended to do this using IgniteConfiguration.setFailureDetectionTimeout(long). This failure timeout automatically controls the following parameters: TcpCommunicationConfigInitializer.getConnectTimeout(), TcpCommunicationConfigInitializer.getMaxConnectTimeout(), TcpCommunicationConfigInitializer.getReconnectCount(). If any of those parameters is set explicitly, then the failure timeout setting will be ignored.
If it's required to perform advanced settings of failure detection and IgniteConfiguration.getFailureDetectionTimeout() is unsuitable then various TcpCommunicationSpi configuration parameters may be used.
Configuration

Mandatory
This SPI has no mandatory configuration parameters.
Optional
The following configuration parameters are optional:
- Address resolver (see TcpCommunicationConfigInitializer.setAddressResolver(AddressResolver)
- Node local IP address (see TcpCommunicationConfigInitializer.setLocalAddress(String))
- Node local port number (see TcpCommunicationConfigInitializer.setLocalPort(int))
- Local port range (see TcpCommunicationConfigInitializer.setLocalPortRange(int)
- Use paired connections (see TcpCommunicationConfigInitializer.setUsePairedConnections(boolean)
- Connections per node (see TcpCommunicationConfigInitializer.setConnectionsPerNode(int))
- Shared memory port (see TcpCommunicationConfigInitializer.setSharedMemoryPort(int)
- Idle connection timeout (see TcpCommunicationConfigInitializer.setIdleConnectionTimeout(long))
- Direct or heap buffer allocation (see TcpCommunicationConfigInitializer.setDirectBuffer(boolean))
- Direct or heap buffer allocation for sending (see TcpCommunicationConfigInitializer.setDirectSendBuffer(boolean))
- Count of selectors and selector threads for NIO server (see TcpCommunicationConfigInitializer.setSelectorsCount(int))
- Selector thread busy-loop iterations (see TcpCommunicationConfigInitializer.setSelectorSpins(long)
- TCP_NODELAY socket option for sockets (see TcpCommunicationConfigInitializer.setTcpNoDelay(boolean))
- Filter reachable addresses (see TcpCommunicationConfigInitializer.setFilterReachableAddresses(boolean)
- Message queue limit (see TcpCommunicationConfigInitializer.setMessageQueueLimit(int))
- Slow client queue limit (see TcpCommunicationConfigInitializer.setSlowClientQueueLimit(int))
- Connect timeout (see TcpCommunicationConfigInitializer.setConnectTimeout(long))
- Maximum connect timeout (see TcpCommunicationConfigInitializer.setMaxConnectTimeout(long))
- Reconnect attempts count (see TcpCommunicationConfigInitializer.setReconnectCount(int))
- Socket receive buffer size (see TcpCommunicationConfigInitializer.setSocketReceiveBuffer(int))
- Socket send buffer size (see TcpCommunicationConfigInitializer.setSocketSendBuffer(int))
- Socket write timeout (see TcpCommunicationConfigInitializer.setSocketWriteTimeout(long))
- Number of received messages after which acknowledgment is sent (see TcpCommunicationConfigInitializer.setAckSendThreshold(int))
- Maximum number of unacknowledged messages (see TcpCommunicationConfigInitializer.setUnacknowledgedMessagesBufferSize(int))
Java Example
TcpCommunicationSpi is used by default and should be explicitly configured only if some SPI configuration parameters need to be overridden.
```
 TcpCommunicationSpi commSpi = new TcpCommunicationSpi();

 // Override local port.
 commSpi.setLocalPort(4321);

 IgniteConfiguration cfg = new IgniteConfiguration();

 // Override default communication SPI.
 cfg.setCommunicationSpi(commSpi);

 // Start grid.
 Ignition.start(cfg);
 
```
Spring Example
TcpCommunicationSpi can be configured from Spring XML configuration file:
```
 <bean id="grid.custom.cfg" class="org.apache.ignite.configuration.IgniteConfiguration" singleton="true">
         ...
         <property name="communicationSpi">
             <bean class="org.apache.ignite.spi.communication.tcp.TcpCommunicationSpi">
                 
                 <property name="localPort" value="4321"/>
             </bean>
         </property>
         ...
 </bean>
 
```
For information about Spring framework visit www.springframework.org
See Also:

CommunicationSpi

Field Summary

Fields
Modifier and Type	Field and Description
`static String`	`ATTR_ADDRS` Node attribute that is mapped to node IP addresses (value is `comm.tcp.addrs`).
`static String`	`ATTR_EXT_ADDRS` Node attribute that is mapped to node's external addresses (value is `comm.tcp.ext-addrs`).
`static String`	`ATTR_FORCE_CLIENT_SERVER_CONNECTIONS`
`static String`	`ATTR_HOST_NAMES` Node attribute that is mapped to node host names (value is `comm.tcp.host.names`).
`static String`	`ATTR_PAIRED_CONN` Attr paired connection.
`static String`	`ATTR_PORT` Node attribute that is mapped to node port number (value is `comm.tcp.port`).
`static String`	`ATTR_SHMEM_PORT` Node attribute that is mapped to node port number (value is `comm.shmem.tcp.port`).
`static String`	`COMMUNICATION_METRICS_GROUP_NAME` Communication metrics group name.
`static int`	`CONN_IDX_META` Connection index meta for session.
`static int`	`CONSISTENT_ID_META` Node consistent id meta for session.
`static int`	`DFLT_ACK_SND_THRESHOLD` Default received messages threshold for sending ack.
`static int`	`DFLT_CONN_PER_NODE` Default connections per node.
`static long`	`DFLT_CONN_TIMEOUT` Default connection timeout (value is `5000`ms).
`static boolean`	`DFLT_FILTER_REACHABLE_ADDRESSES` Default value for `FILTER_REACHABLE_ADDRESSES` socket option (value is `false`).
`static long`	`DFLT_IDLE_CONN_TIMEOUT` Default idle connection timeout (value is `10`min).
`static long`	`DFLT_MAX_CONN_TIMEOUT` Default Maximum connection timeout (value is `600,000`ms).
`static int`	`DFLT_MSG_QUEUE_LIMIT` Default message queue limit per connection (for incoming and outgoing .
`static int`	`DFLT_PORT` Default port which node sets listener to (value is `47100`).
`static int`	`DFLT_PORT_RANGE` Default local port range (value is `100`).
`static int`	`DFLT_RECONNECT_CNT` Default reconnect attempts count (value is `10`).
`static int`	`DFLT_SELECTORS_CNT` Default count of selectors for TCP server equals to `"Math.max(4, Runtime.getRuntime().availableProcessors() / 2)"`.
`static int`	`DFLT_SHMEM_PORT` Default port which node sets listener for shared memory connections (value is `48100`).
`static int`	`DFLT_SOCK_BUF_SIZE` Default socket send and receive buffer size.
`static long`	`DFLT_SOCK_WRITE_TIMEOUT` Default socket write timeout.
`static boolean`	`DFLT_TCP_NODELAY` Default value for `TCP_NODELAY` socket option (value is `true`).
`static Integer`	`DISABLED_CLIENT_PORT` Client nodes might have port `0` if they have no server socket opened.
`static short`	`HANDSHAKE_MSG_TYPE` Handshake message type.
`static short`	`HANDSHAKE_WAIT_MSG_TYPE` Handshake wait message type.
`static short`	`NODE_ID_MSG_TYPE` Node ID message type.
`static String`	`OUT_OF_RESOURCES_TCP_MSG` IPC error message.
`static String`	`RECEIVED_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_DESC` Received messages by node consistent id metric description.
`static String`	`RECEIVED_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_NAME` Received messages by node consistent id metric name.
`static String`	`RECEIVED_MESSAGES_BY_TYPE_METRIC_DESC` Received messages by type metric description.
`static String`	`RECEIVED_MESSAGES_BY_TYPE_METRIC_NAME` Received messages by type metric name.
`static String`	`RECEIVED_MESSAGES_METRIC_DESC` Received messages metric description.
`static String`	`RECEIVED_MESSAGES_METRIC_NAME` Received messages metric name.
`static short`	`RECOVERY_LAST_ID_MSG_TYPE` Recovery last received ID message type.
`static String`	`SENT_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_DESC` Sent messages by node consistent id metric description.
`static String`	`SENT_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_NAME` Sent messages by node consistent id metric name.
`static String`	`SENT_MESSAGES_BY_TYPE_METRIC_DESC` Sent messages by type metric description.
`static String`	`SENT_MESSAGES_BY_TYPE_METRIC_NAME` Sent messages by type metric name.
`static String`	`SENT_MESSAGES_METRIC_DESC` Sent messages metric description.
`static String`	`SENT_MESSAGES_METRIC_NAME` Sent messages metric name.

Fields inherited from class org.apache.ignite.spi.communication.tcp.internal.TcpCommunicationConfigInitializer
attributeNames, cfg, connPlc, metricsLsnr, shmemSrv, tracing

Fields inherited from class org.apache.ignite.spi.IgniteSpiAdapter
ignite, igniteInstanceName

Constructor Summary

Constructors
Constructor and Description

TcpCommunicationSpi()

Constructors
Constructor and Description
`TcpCommunicationSpi()`

Method Summary

All Methods Static Methods Instance Methods Concrete Methods Deprecated Methods
Modifier and Type	Method and Description
`protected void`	`checkConfigurationConsistency0(IgniteSpiContext spiCtx, ClusterNode node, boolean starting)` Method which is called in the end of checkConfigurationConsistency() method.
`IgniteFuture<BitSet>`	`checkConnection(List<ClusterNode> nodes)`
`protected GridCommunicationClient`	`createTcpClient(ClusterNode node, int connIdx)` Establish TCP connection to remote node and returns client.
`IgniteInternalFuture<String>`	`dumpNodeStatistics(UUID nodeId)`
`void`	`dumpStats()` Dumps SPI per-connection stats to logs.
`CommunicationListener`	`getListener()`
`int`	`getOutboundMessagesQueueSize()` Gets outbound messages queue size.
`long`	`getReceivedBytesCount()` Gets received bytes count.
`Map<UUID,Long>`	`getReceivedMessagesByNode()` Gets received messages counts (grouped by node).
`Map<String,Long>`	`getReceivedMessagesByType()` Gets received messages counts (grouped by type).
`int`	`getReceivedMessagesCount()` Gets received messages count.
`long`	`getSentBytesCount()` Gets sent bytes count.
`Map<UUID,Long>`	`getSentMessagesByNode()` Gets sent messages counts (grouped by node).
`Map<String,Long>`	`getSentMessagesByType()` Gets sent messages counts (grouped by type).
`int`	`getSentMessagesCount()` Gets sent messages count.
`IgniteSpiContext`	`getSpiContext()` Gets SPI context.
`static short`	`makeMessageType(byte b0, byte b1)` Concatenates the two parameter bytes to form a message type value.
`Collection<InetSocketAddress>`	`nodeAddresses(ClusterNode node, boolean filterReachableAddrs)`
`protected void`	`notifyListener(UUID sndId, Message msg, IgniteRunnable msgC)`
`void`	`onClientDisconnected(IgniteFuture<?> reconnectFut)` Client node disconnected callback.
`void`	`onClientReconnected(boolean clusterRestarted)` Client node reconnected callback.
`protected void`	`onContextDestroyed0()` Method to be called in the beginning of onContextDestroyed() method.
`void`	`onContextInitialized0(IgniteSpiContext spiCtx)` Method to be called in the end of onContextInitialized method.
`IgniteInternalFuture<Channel>`	`openChannel(ClusterNode remote, Message initMsg)`
`protected void`	`processSessionCreationError(ClusterNode node, Collection<InetSocketAddress> addrs, IgniteCheckedException errs)` Process errors if TCP/IP `GridNioSession` creation to remote node hasn't been performed.
`void`	`resetMetrics()` Resets metrics for this SPI instance.
`void`	`sendMessage(ClusterNode node, Message msg)` Sends given message to destination node.
`void`	`sendMessage(ClusterNode node, Message msg, IgniteInClosure<IgniteException> ackC)` Sends given message to destination node.
`void`	`setListener(CommunicationListener<Message> lsnr)` Deprecated.
`void`	`simulateNodeFailure()` Deprecated. you should you DI and get instances of [nioSrvWrapper, commWorker, clientPool] via it.
`void`	`spiStart(String igniteInstanceName)` This method is called to start SPI.
`void`	`spiStop()` This method is called to stop SPI.
`String`	`toString()`
`static void`	`writeMessageType(ByteBuffer buf, short type)` Write message type to byte buffer.

Methods inherited from class org.apache.ignite.spi.communication.tcp.internal.TcpCommunicationConfigInitializer
boundPort, failureDetectionTimeout, failureDetectionTimeoutEnabled, failureDetectionTimeoutEnabled, forceClientToServerConnections, getAckSendThreshold, getAddressResolver, getConnectionsPerNode, getConnectTimeout, getIdleConnectionTimeout, getLocalAddress, getLocalPort, getLocalPortRange, getMaxConnectTimeout, getMessageQueueLimit, getNodeAttributes, getReconnectCount, getSelectorsCount, getSelectorSpins, getSharedMemoryPort, getSlowClientQueueLimit, getSocketReceiveBuffer, getSocketSendBuffer, getSocketWriteTimeout, getUnacknowledgedMessagesBufferSize, injectResources, isDirectBuffer, isDirectSendBuffer, isFilterReachableAddresses, isTcpNoDelay, isUsePairedConnections, resetShmemServer, setAckSendThreshold, setAddressResolver, setConnectionRequestor, setConnectionsPerNode, setConnectTimeout, setDirectBuffer, setDirectSendBuffer, setFilterReachableAddresses, setForceClientToServerConnections, setIdleConnectionTimeout, setLocalAddress, setLocalPort, setLocalPortRange, setMaxConnectTimeout, setMessageQueueLimit, setName, setReconnectCount, setSelectorsCount, setSelectorSpins, setSharedMemoryPort, setSlowClientQueueLimit, setSocketReceiveBuffer, setSocketSendBuffer, setSocketWriteTimeout, setTcpNoDelay, setUnacknowledgedMessagesBufferSize, setUsePairedConnections

Methods inherited from class org.apache.ignite.spi.IgniteSpiAdapter
addTimeoutObject, assertParameter, clientFailureDetectionTimeout, configInfo, createSpiAttributeName, getConsistentAttributeNames, getExceptionRegistry, getLocalNode, getName, ignite, initFailureDetectionTimeout, injectables, isNodeStopping, onBeforeStart, onContextDestroyed, onContextInitialized, registerMBean, removeTimeoutObject, started, startInfo, startStopwatch, stopInfo, unregisterMBean

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface org.apache.ignite.spi.IgniteSpi
getName, onContextDestroyed, onContextInitialized

- Field Detail
  - OUT_OF_RESOURCES_TCP_MSG
```
public static final String OUT_OF_RESOURCES_TCP_MSG
```
    IPC error message.
    
    See Also:
    
    Constant Field Values
  - ATTR_ADDRS
```
public static final String ATTR_ADDRS
```
    Node attribute that is mapped to node IP addresses (value is comm.tcp.addrs).
    
    See Also:
    
    Constant Field Values
  - ATTR_HOST_NAMES
```
public static final String ATTR_HOST_NAMES
```
    Node attribute that is mapped to node host names (value is comm.tcp.host.names).
    
    See Also:
    
    Constant Field Values
  - ATTR_PORT
```
public static final String ATTR_PORT
```
    Node attribute that is mapped to node port number (value is comm.tcp.port).
    
    See Also:
    
    Constant Field Values
  - ATTR_SHMEM_PORT
```
public static final String ATTR_SHMEM_PORT
```
    Node attribute that is mapped to node port number (value is comm.shmem.tcp.port).
    
    See Also:
    
    Constant Field Values
  - ATTR_EXT_ADDRS
```
public static final String ATTR_EXT_ADDRS
```
    Node attribute that is mapped to node's external addresses (value is comm.tcp.ext-addrs).
    
    See Also:
    
    Constant Field Values
  - ATTR_PAIRED_CONN
```
public static final String ATTR_PAIRED_CONN
```
    Attr paired connection.
    
    See Also:
    
    Constant Field Values
  - DFLT_PORT
```
public static final int DFLT_PORT
```
    Default port which node sets listener to (value is 47100).
    
    See Also:
    
    Constant Field Values
  - DFLT_SHMEM_PORT
```
public static final int DFLT_SHMEM_PORT
```
    Default port which node sets listener for shared memory connections (value is 48100).
    
    See Also:
    
    Constant Field Values
  - DFLT_IDLE_CONN_TIMEOUT
```
public static final long DFLT_IDLE_CONN_TIMEOUT
```
    Default idle connection timeout (value is 10min).
    
    See Also:
    
    Constant Field Values
  - DFLT_SOCK_BUF_SIZE
```
public static final int DFLT_SOCK_BUF_SIZE
```
    Default socket send and receive buffer size.
    
    See Also:
    
    Constant Field Values
  - DFLT_CONN_TIMEOUT
```
public static final long DFLT_CONN_TIMEOUT
```
    Default connection timeout (value is 5000ms).
    
    See Also:
    
    Constant Field Values
  - DFLT_MAX_CONN_TIMEOUT
```
public static final long DFLT_MAX_CONN_TIMEOUT
```
    Default Maximum connection timeout (value is 600,000ms).
    
    See Also:
    
    Constant Field Values
  - DFLT_RECONNECT_CNT
```
public static final int DFLT_RECONNECT_CNT
```
    Default reconnect attempts count (value is 10).
    
    See Also:
    
    Constant Field Values
  - DFLT_MSG_QUEUE_LIMIT
```
public static final int DFLT_MSG_QUEUE_LIMIT
```
    Default message queue limit per connection (for incoming and outgoing .
    
    See Also:
    
    Constant Field Values
  - DFLT_SELECTORS_CNT
```
public static final int DFLT_SELECTORS_CNT
```
    Default count of selectors for TCP server equals to "Math.max(4, Runtime.getRuntime().availableProcessors() / 2)".
  - CONN_IDX_META
```
public static final int CONN_IDX_META
```
    Connection index meta for session.
  - CONSISTENT_ID_META
```
public static final int CONSISTENT_ID_META
```
    Node consistent id meta for session.
  - DFLT_PORT_RANGE
```
public static final int DFLT_PORT_RANGE
```
    Default local port range (value is 100). See TcpCommunicationConfigInitializer.setLocalPortRange(int) for details.
    
    See Also:
    
    Constant Field Values
  - DFLT_TCP_NODELAY
```
public static final boolean DFLT_TCP_NODELAY
```
    Default value for TCP_NODELAY socket option (value is true).
    
    See Also:
    
    Constant Field Values
  - DFLT_FILTER_REACHABLE_ADDRESSES
```
public static final boolean DFLT_FILTER_REACHABLE_ADDRESSES
```
    Default value for FILTER_REACHABLE_ADDRESSES socket option (value is false).
    
    See Also:
    
    Constant Field Values
  - DFLT_ACK_SND_THRESHOLD
```
public static final int DFLT_ACK_SND_THRESHOLD
```
    Default received messages threshold for sending ack.
    
    See Also:
    
    Constant Field Values
  - DFLT_SOCK_WRITE_TIMEOUT
```
public static final long DFLT_SOCK_WRITE_TIMEOUT
```
    Default socket write timeout.
    
    See Also:
    
    Constant Field Values
  - DFLT_CONN_PER_NODE
```
public static final int DFLT_CONN_PER_NODE
```
    Default connections per node.
    
    See Also:
    
    Constant Field Values
  - NODE_ID_MSG_TYPE
```
public static final short NODE_ID_MSG_TYPE
```
    Node ID message type.
    
    See Also:
    
    Constant Field Values
  - RECOVERY_LAST_ID_MSG_TYPE
```
public static final short RECOVERY_LAST_ID_MSG_TYPE
```
    Recovery last received ID message type.
    
    See Also:
    
    Constant Field Values
  - HANDSHAKE_MSG_TYPE
```
public static final short HANDSHAKE_MSG_TYPE
```
    Handshake message type.
    
    See Also:
    
    Constant Field Values
  - HANDSHAKE_WAIT_MSG_TYPE
```
public static final short HANDSHAKE_WAIT_MSG_TYPE
```
    Handshake wait message type.
    
    See Also:
    
    Constant Field Values
  - COMMUNICATION_METRICS_GROUP_NAME
```
public static final String COMMUNICATION_METRICS_GROUP_NAME
```
    Communication metrics group name.
  - SENT_MESSAGES_METRIC_NAME
```
public static final String SENT_MESSAGES_METRIC_NAME
```
    Sent messages metric name.
    
    See Also:
    
    Constant Field Values
  - SENT_MESSAGES_METRIC_DESC
```
public static final String SENT_MESSAGES_METRIC_DESC
```
    Sent messages metric description.
    
    See Also:
    
    Constant Field Values
  - RECEIVED_MESSAGES_METRIC_NAME
```
public static final String RECEIVED_MESSAGES_METRIC_NAME
```
    Received messages metric name.
    
    See Also:
    
    Constant Field Values
  - RECEIVED_MESSAGES_METRIC_DESC
```
public static final String RECEIVED_MESSAGES_METRIC_DESC
```
    Received messages metric description.
    
    See Also:
    
    Constant Field Values
  - SENT_MESSAGES_BY_TYPE_METRIC_NAME
```
public static final String SENT_MESSAGES_BY_TYPE_METRIC_NAME
```
    Sent messages by type metric name.
    
    See Also:
    
    Constant Field Values
  - SENT_MESSAGES_BY_TYPE_METRIC_DESC
```
public static final String SENT_MESSAGES_BY_TYPE_METRIC_DESC
```
    Sent messages by type metric description.
    
    See Also:
    
    Constant Field Values
  - RECEIVED_MESSAGES_BY_TYPE_METRIC_NAME
```
public static final String RECEIVED_MESSAGES_BY_TYPE_METRIC_NAME
```
    Received messages by type metric name.
    
    See Also:
    
    Constant Field Values
  - RECEIVED_MESSAGES_BY_TYPE_METRIC_DESC
```
public static final String RECEIVED_MESSAGES_BY_TYPE_METRIC_DESC
```
    Received messages by type metric description.
    
    See Also:
    
    Constant Field Values
  - SENT_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_NAME
```
public static final String SENT_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_NAME
```
    Sent messages by node consistent id metric name.
    
    See Also:
    
    Constant Field Values
  - SENT_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_DESC
```
public static final String SENT_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_DESC
```
    Sent messages by node consistent id metric description.
    
    See Also:
    
    Constant Field Values
  - RECEIVED_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_NAME
```
public static final String RECEIVED_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_NAME
```
    Received messages by node consistent id metric name.
    
    See Also:
    
    Constant Field Values
  - RECEIVED_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_DESC
```
public static final String RECEIVED_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_DESC
```
    Received messages by node consistent id metric description.
    
    See Also:
    
    Constant Field Values
  - DISABLED_CLIENT_PORT
```
public static final Integer DISABLED_CLIENT_PORT
```
    Client nodes might have port 0 if they have no server socket opened.
  - ATTR_FORCE_CLIENT_SERVER_CONNECTIONS
```
public static final String ATTR_FORCE_CLIENT_SERVER_CONNECTIONS
```
    See Also:
    
    Constant Field Values
- Constructor Detail
  - TcpCommunicationSpi
```
public TcpCommunicationSpi()
```
- Method Detail
  - setListener
```
@Deprecated
public void setListener(CommunicationListener<Message> lsnr)
```
    Deprecated.
    
    Set communication listener. This call should be change after refactoring. It produces dependency hell. Because GridIoManager set it after self construct.
    
    Parameters:
    
    lsnr - Listener to set or null to unset the listener.
  - getListener
```
public CommunicationListener getListener()
```
    Returns:
    
    Listener.
  - getSentMessagesCount
```
public int getSentMessagesCount()
```
    Gets sent messages count.
    
    Returns:
    
    Sent messages count.
  - getSentBytesCount
```
public long getSentBytesCount()
```
    Gets sent bytes count.
    
    Returns:
    
    Sent bytes count.
  - getReceivedMessagesCount
```
public int getReceivedMessagesCount()
```
    Gets received messages count.
    
    Returns:
    
    Received messages count.
  - getReceivedBytesCount
```
public long getReceivedBytesCount()
```
    Gets received bytes count.
    
    Returns:
    
    Received bytes count.
  - getReceivedMessagesByType
```
public Map<String,Long> getReceivedMessagesByType()
```
    Gets received messages counts (grouped by type).
    
    Returns:
    
    Map containing message types and respective counts.
  - getReceivedMessagesByNode
```
public Map<UUID,Long> getReceivedMessagesByNode()
```
    Gets received messages counts (grouped by node).
    
    Returns:
    
    Map containing sender nodes and respective counts.
  - getSentMessagesByType
```
public Map<String,Long> getSentMessagesByType()
```
    Gets sent messages counts (grouped by type).
    
    Returns:
    
    Map containing message types and respective counts.
  - getSentMessagesByNode
```
public Map<UUID,Long> getSentMessagesByNode()
```
    Gets sent messages counts (grouped by node).
    
    Returns:
    
    Map containing receiver nodes and respective counts.
  - getOutboundMessagesQueueSize
```
public int getOutboundMessagesQueueSize()
```
    Gets outbound messages queue size.
    
    Returns:
    
    Outbound messages queue size.
  - resetMetrics
```
public void resetMetrics()
```
    Resets metrics for this SPI instance.
  - dumpNodeStatistics
```
public IgniteInternalFuture<String> dumpNodeStatistics(UUID nodeId)
```
    Parameters:
    
    nodeId - Target node ID.
    
    Returns:
    
    Future.
  - dumpStats
```
public void dumpStats()
```
    Dumps SPI per-connection stats to logs.
  - spiStart
```
public void spiStart(String igniteInstanceName)
              throws IgniteSpiException
```
    This method is called to start SPI. After this method returns successfully kernel assumes that SPI is fully operational.
    
    Parameters:
    
    igniteInstanceName - Name of Ignite instance this SPI is being started for (null for default Ignite instance).
    
    Throws:
    
    IgniteSpiException - Throws in case of any error during SPI start.
  - onContextInitialized0
```
public void onContextInitialized0(IgniteSpiContext spiCtx)
                           throws IgniteSpiException
```
    Method to be called in the end of onContextInitialized method. }
    
    Overrides:
    
    onContextInitialized0 in class IgniteSpiAdapter
    
    Parameters:
    
    spiCtx - SPI context.
    
    Throws:
    
    IgniteSpiException - In case of errors.
  - getSpiContext
```
public IgniteSpiContext getSpiContext()
```
    Gets SPI context.
    
    Overrides:
    
    getSpiContext in class IgniteSpiAdapter
    
    Returns:
    
    SPI context.
  - spiStop
```
public void spiStop()
             throws IgniteSpiException
```
    This method is called to stop SPI. After this method returns kernel assumes that this SPI is finished and all resources acquired by it are released.
    Note that this method can be called at any point including during recovery of failed start. It should make no assumptions on what state SPI will be in when this method is called.
    
    Throws:
    
    IgniteSpiException - Thrown in case of any error during SPI stop.
  - onContextDestroyed0
```
protected void onContextDestroyed0()
```
    Method to be called in the beginning of onContextDestroyed() method.
    
    Overrides:
    
    onContextDestroyed0 in class IgniteSpiAdapter
  - onClientDisconnected
```
public void onClientDisconnected(IgniteFuture<?> reconnectFut)
```
    Client node disconnected callback.
    
    Specified by:
    
    onClientDisconnected in interface IgniteSpi
    
    Overrides:
    
    onClientDisconnected in class IgniteSpiAdapter
    
    Parameters:
    
    reconnectFut - Future that will be completed when client reconnected.
  - onClientReconnected
```
public void onClientReconnected(boolean clusterRestarted)
```
    Client node reconnected callback.
    
    Specified by:
    
    onClientReconnected in interface IgniteSpi
    
    Overrides:
    
    onClientReconnected in class IgniteSpiAdapter
    
    Parameters:
    
    clusterRestarted - True if all cluster nodes restarted while client was disconnected.
  - checkConfigurationConsistency0
```
protected void checkConfigurationConsistency0(IgniteSpiContext spiCtx,
                                              ClusterNode node,
                                              boolean starting)
                                       throws IgniteSpiException
```
    Method which is called in the end of checkConfigurationConsistency() method. May be overriden in SPIs.
    
    Overrides:
    
    checkConfigurationConsistency0 in class IgniteSpiAdapter
    
    Parameters:
    
    spiCtx - SPI context.
    
    node - Remote node.
    
    starting - If this node is starting or not.
    
    Throws:
    
    IgniteSpiException - in case of errors.
  - openChannel
```
public IgniteInternalFuture<Channel> openChannel(ClusterNode remote,
                                                 Message initMsg)
                                          throws IgniteSpiException
```
    Parameters:
    
    remote - Destination cluster node to communicate with.
    
    initMsg - Configuration channel attributes wrapped into the message.
    
    Returns:
    
    The future, which will be finished on channel ready.
    
    Throws:
    
    IgniteSpiException - If fails.
  - sendMessage
```
public void sendMessage(ClusterNode node,
                        Message msg)
                 throws IgniteSpiException
```
    Sends given message to destination node. Note that characteristics of the exchange such as durability, guaranteed delivery or error notification is dependant on SPI implementation.
    
    Parameters:
    
    node - Destination node.
    
    msg - Message to send.
    
    Throws:
    
    IgniteSpiException - Thrown in case of any error during sending the message. Note that this is not guaranteed that failed communication will result in thrown exception as this is dependant on SPI implementation.
  - checkConnection
```
public IgniteFuture<BitSet> checkConnection(List<ClusterNode> nodes)
```
    Parameters:
    
    nodes - Nodes to check connection with.
    
    Returns:
    
    Result future (each bit in result BitSet contains connection status to corresponding node).
  - sendMessage
```
public void sendMessage(ClusterNode node,
                        Message msg,
                        IgniteInClosure<IgniteException> ackC)
                 throws IgniteSpiException
```
    Sends given message to destination node. Note that characteristics of the exchange such as durability, guaranteed delivery or error notification is dependant on SPI implementation.
    
    Parameters:
    
    node - Destination node.
    
    msg - Message to send.
    
    ackC - Ack closure.
    
    Throws:
    
    IgniteSpiException - Thrown in case of any error during sending the message. Note that this is not guaranteed that failed communication will result in thrown exception as this is dependant on SPI implementation.
  - nodeAddresses
```
public Collection<InetSocketAddress> nodeAddresses(ClusterNode node,
                                                   boolean filterReachableAddrs)
                                            throws IgniteCheckedException
```
    Parameters:
    
    node - Node.
    
    filterReachableAddrs - Filter addresses flag.
    
    Returns:
    
    Node addresses.
    
    Throws:
    
    IgniteCheckedException - If node does not have addresses.
  - createTcpClient
```
protected GridCommunicationClient createTcpClient(ClusterNode node,
                                                  int connIdx)
                                           throws IgniteCheckedException
```
    Establish TCP connection to remote node and returns client.
    
    Parameters:
    
    node - Remote node.
    
    connIdx - Connection index.
    
    Returns:
    
    Client.
    
    Throws:
    
    IgniteCheckedException - If failed.
  - processSessionCreationError
```
protected void processSessionCreationError(ClusterNode node,
                                           Collection<InetSocketAddress> addrs,
                                           IgniteCheckedException errs)
                                    throws IgniteCheckedException
```
    Process errors if TCP/IP GridNioSession creation to remote node hasn't been performed.
    
    Parameters:
    
    node - Remote node.
    
    addrs - Remote node addresses.
    
    errs - TCP client creation errors.
    
    Throws:
    
    IgniteCheckedException - If failed.
  - notifyListener
```
protected void notifyListener(UUID sndId,
                              Message msg,
                              IgniteRunnable msgC)
```
    Parameters:
    
    sndId - Sender ID.
    
    msg - Communication message.
    
    msgC - Closure to call when message processing finished.
  - simulateNodeFailure
```
@TestOnly
 @Deprecated
public void simulateNodeFailure()
```
    Deprecated. you should you DI and get instances of [nioSrvWrapper, commWorker, clientPool] via it.
    
    Stops service threads to simulate node failure. FOR TEST PURPOSES ONLY!!!
  - toString
```
public String toString()
```
    Overrides:
    
    toString in class Object
  - writeMessageType
```
public static void writeMessageType(ByteBuffer buf,
                                    short type)
```
    Write message type to byte buffer.
    
    Parameters:
    
    buf - Byte buffer.
    
    type - Message type.
  - makeMessageType
```
public static short makeMessageType(byte b0,
                                    byte b1)
```
    Concatenates the two parameter bytes to form a message type value.
    
    Parameters:
    
    b0 - The first byte.
    
    b1 - The second byte.

Class TcpCommunicationSpi

Failure Detection

Configuration

Mandatory

Optional

Java Example

Spring Example

Field Summary

Fields inherited from class org.apache.ignite.spi.communication.tcp.internal.TcpCommunicationConfigInitializer

Fields inherited from class org.apache.ignite.spi.IgniteSpiAdapter

Constructor Summary

Method Summary

Methods inherited from class org.apache.ignite.spi.communication.tcp.internal.TcpCommunicationConfigInitializer

Methods inherited from class org.apache.ignite.spi.IgniteSpiAdapter

Methods inherited from class java.lang.Object

Methods inherited from interface org.apache.ignite.spi.IgniteSpi

Field Detail

OUT_OF_RESOURCES_TCP_MSG

ATTR_ADDRS

ATTR_HOST_NAMES

ATTR_PORT

ATTR_SHMEM_PORT

ATTR_EXT_ADDRS

ATTR_PAIRED_CONN

DFLT_PORT

DFLT_SHMEM_PORT

DFLT_IDLE_CONN_TIMEOUT

DFLT_SOCK_BUF_SIZE

DFLT_CONN_TIMEOUT

DFLT_MAX_CONN_TIMEOUT

DFLT_RECONNECT_CNT

DFLT_MSG_QUEUE_LIMIT

DFLT_SELECTORS_CNT

CONN_IDX_META

CONSISTENT_ID_META

DFLT_PORT_RANGE

DFLT_TCP_NODELAY

DFLT_FILTER_REACHABLE_ADDRESSES

DFLT_ACK_SND_THRESHOLD

DFLT_SOCK_WRITE_TIMEOUT

DFLT_CONN_PER_NODE

NODE_ID_MSG_TYPE

RECOVERY_LAST_ID_MSG_TYPE

HANDSHAKE_MSG_TYPE

HANDSHAKE_WAIT_MSG_TYPE

COMMUNICATION_METRICS_GROUP_NAME

SENT_MESSAGES_METRIC_NAME

SENT_MESSAGES_METRIC_DESC

RECEIVED_MESSAGES_METRIC_NAME

RECEIVED_MESSAGES_METRIC_DESC

SENT_MESSAGES_BY_TYPE_METRIC_NAME

SENT_MESSAGES_BY_TYPE_METRIC_DESC

RECEIVED_MESSAGES_BY_TYPE_METRIC_NAME

RECEIVED_MESSAGES_BY_TYPE_METRIC_DESC

SENT_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_NAME

SENT_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_DESC

RECEIVED_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_NAME

RECEIVED_MESSAGES_BY_NODE_CONSISTENT_ID_METRIC_DESC

DISABLED_CLIENT_PORT

ATTR_FORCE_CLIENT_SERVER_CONNECTIONS

Constructor Detail

TcpCommunicationSpi

Method Detail

setListener

getListener

getSentMessagesCount

getSentBytesCount

getReceivedMessagesCount

getReceivedBytesCount

getReceivedMessagesByType

getReceivedMessagesByNode

getSentMessagesByType

getSentMessagesByNode

getOutboundMessagesQueueSize

resetMetrics

dumpNodeStatistics

dumpStats

spiStart

onContextInitialized0

getSpiContext