A class supporting filtered operations
Computes the intersection between this bitset and another bitset by performing a bitwise "and"
Computes the intersection between this bitset and another bitset by performing a bitwise "and".
Computes the intersection between this set and another set
Computes the intersection between this set and another set.
the set to intersect with.
a new set consisting of all elements that are both in this
set and in the given set that
.
Computes the difference of this bitset and another bitset by performing a bitwise "and-not"
Computes the difference of this bitset and another bitset by performing a bitwise "and-not".
The difference of this set and another set
The difference of this set and another set.
the set of elements to exclude.
a set containing those elements of this
set that are not also contained in the given set that
.
This method is an alias for intersect
This method is an alias for intersect
.
It computes an intersection with set that
.
It removes all the elements that are not present in that
.
the set to intersect with
Adds two or more elements to this collection and returns the collection itself
Adds a single element to this collection and returns the collection itself
Adds a number of elements provided by an iterator and returns the collection itself
Adds a number of elements provided by a traversable object and returns either the collection itself
Concatenates this bitset with the elements of an iterator
Concatenates this bitset with the elements of an iterator.
the element type of the returned collection.
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the iterator to append.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and
and the new element type B
.
a new collection of type That
which contains all elements of this bitset
followed by all elements of that
.
Concatenates this bitset with the elements of a traversable collection
Concatenates this bitset with the elements of a traversable collection.
the element type of the returned collection.
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and
and the new element type B
.
a new collection of type That
which contains all elements of this bitset
followed by all elements of that
.
adds all elements contained in a traversable collection to this bitset
adds all elements contained in a traversable collection to this bitset.
the collection containing the elements to add.
the bitset itself.
adds all elements produced by an iterator to this bitset
adds all elements produced by an iterator to this bitset.
the iterator producing the elements to add.
the bitset itself.
Adds a single element to the builder
Adds a single element to the builder.
the element to be added.
the builder itself.
adds two or more elements to this bitset
adds two or more elements to this bitset.
the first element to add.
the second element to add.
the remaining elements to add.
the bitset itself
Removes two or more elements from this collection and returns the collection itself
Removes two or more elements from this collection and returns the collection itself.
the first element to remove.
the second element to remove.
the remaining elements to remove.
a new bitset that contains all elements of the current bitset except one less occurrence of each of the given elements.
Removes a single element from this collection and returns the collection itself
Removes a single element from this collection and returns the collection itself.
the element to remove.
a new set that contains all elements of this set but that does not
contain elem
.
Removes a number of elements provided by an iterator and returns the collection itself
Removes a number of elements provided by an iterator and returns the collection itself.
the iterator
a new bitset that contains all elements of the current bitset
except one less occurrence of each of the elements produced by iter
.
Removes a number of elements provided by a Traversable object and returns the collection itself
Removes a number of elements provided by a Traversable object and returns the collection itself.
the Traversable object.
a new bitset that contains all elements of the current bitset
except one less occurrence of each of the elements of elems
.
Removes all elements contained in a traversable collection from this bitset
Removes all elements contained in a traversable collection from this bitset.
the collection containing the elements to remove.
the bitset itself
Removes all elements produced by an iterator from this bitset
Removes all elements produced by an iterator from this bitset.
the iterator producing the elements to remove.
the bitset itself
Removes a single element from this bitset
Removes a single element from this bitset.
the element to remove.
the bitset itself
Removes two or more elements from this bitset
Removes two or more elements from this bitset.
the first element to remove.
the second element to remove.
the remaining elements to remove.
the bitset itself
Applies a binary operator to a start value and all elements of this bitset, going left to right
Applies a binary operator to a start value and all elements of this bitset, going left to right.
Note: /:
is alternate syntax for foldLeft
; z /: xs
is the same as xs foldLeft z
.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this bitset$,
going left to right with the start value z
on the left:
{{{
op(...op(op(z, x_{1}), x_{2}), ..., x_{n})
}}}
where x,,1,,, ..., x,,n,,
are the elements of this bitset.
Applies a binary operator to all elements of this bitset and a start value, going right to left
Applies a binary operator to all elements of this bitset and a start value, going right to left.
Note: :\
is alternate syntax for foldRight
; xs :\ z
is the same as xs foldRight z
.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value
the binary operator
the result of inserting op
between consecutive elements of this bitset$,
going right to left with the start value z
on the right:
{{{
op(x_{1}, op(x_{2}, ... op(x_{n}, z)...))
}}}
where x,,1,,, ..., x,,n,,
are the elements of this bitset.
Send a message to this scriptable object
Send a message to this scriptable object.
the message to send.
Computes the symmetric difference of this bitset and another bitset by performing a bitwise "exclusive-or"
Computes the symmetric difference of this bitset and another bitset by performing a bitwise "exclusive-or".
Adds an element to this bitset
Adds an element to this bitset.
the element to be added
true
if the element was not yet present in the set, false
otherwise.
Appends all elements of this bitset to a string builder using start, end, and separator strings
Appends all elements of this bitset to a string builder using start, end, and separator strings.
The written text begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method toString
)
of all elements of this bitset are separated by the string sep
.
the starting string.
the separator string.
the ending string.
the string builder b
to which elements were appended.
Appends all elements of this bitset to a string builder
Appends all elements of this bitset to a string builder.
The written text consists of the string representations (w.r.t. the method toString
)
of all elements of this bitset without any separator string.
the string builder to which elements are appended.
the string builder b
to which elements were appended.
Appends all elements of this bitset to a string builder using a separator string
Appends all elements of this bitset to a string builder using a separator string.
The written text consists of the string representations (w.r.t. the method toString
)
of all elements of this bitset, separated by the string sep
.
the string builder to which elements are appended.
the separator string.
the string builder b
to which elements were appended.
(f andThen g)(x) == g(f(x))
(f andThen g)(x) == g(f(x))
Tests if some element is contained in this set
Tests if some element is contained in this set.
This method is equivalent to contains
. It allows sets to be interpreted as predicates.
the element to test for membership.
true
if elem
is contained in this set, false
otherwise.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
The object with which this bitset should be compared
true
, if this bitset can possibly equal that
, false
otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
Removes all elements from the set
Removes all elements from the set. After this operation is completed, the set will be empty.
This method creates and returns a copy of the receiver object
This method creates and returns a copy of the receiver object.
The default implementation of the clone
method is platform dependent.
The factory companion object that builds instances of class BitSet define bitsetinfo Bitsets are sets of non-negative integers which are represented as variable-size arrays of bits packed into 64-bit words
The factory companion object that builds instances of class BitSet define bitsetinfo Bitsets are sets of non-negative integers which are represented as variable-size arrays of bits packed into 64-bit words. The size of a bitset is determined by the largest number stored in it. .
(f compose g)(x) == f(g(x))
(f compose g)(x) == f(g(x))
Tests if some element is contained in this set
Tests if some element is contained in this set.
the element to test for membership.
true
if elem
is contained in this set, false
otherwise.
Copies elements of this bitset to an array
Copies elements of this bitset to an array.
Fills the given array xs
with at most len
elements of
this bitset, starting at position start
.
Copying will stop once either the end of the current bitset is reached,
or the end of the array is reached, or len
elements have been copied.
the type of the elements of the array.
the array to fill.
the starting index.
the maximal number of elements to copy.
Copies elements of this bitset to an array
Copies elements of this bitset to an array.
Fills the given array xs
with all elements of
this bitset, starting at position 0
.
Copying will stop once either the end of the current bitset is reached,
or the end of the array is reached.
the type of the elements of the array.
the array to fill.
Copies elements of this bitset to an array
Copies elements of this bitset to an array.
Fills the given array xs
with all elements of
this bitset, starting at position start
.
Copying will stop once either the end of the current bitset is reached,
or the end of the array is reached.
the type of the elements of the array.
the array to fill.
the starting index.
Copies all elements of this bitset to a buffer
Copies all elements of this bitset to a buffer.
The buffer to which elements are copied.
Counts the number of elements in the bitset which satisfy a predicate
Counts the number of elements in the bitset which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p
.
Computes the difference of this set and another set
Computes the difference of this set and another set.
the set of elements to exclude.
a set containing those elements of this
set that are not also contained in the given set that
.
Selects all elements except first n ones
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to drop from this bitset.
a bitset consisting of all elements of this bitset except the first n
ones, or else the
empty bitset, if this bitset has less than n
elements.
Selects all elements except first n ones
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The number of elements to take
a bitset consisting of all elements of this bitset except the first n
ones, or else the
empty bitset, if this bitset has less than n
elements.
Drops longest prefix of elements that satisfy a predicate
Drops longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The predicate used to test elements.
the longest suffix of this bitset whose first element
does not satisfy the predicate p
.
Compares this set with another object for equality
Tests whether a predicate holds for some of the elements of this bitset
Tests whether a predicate holds for some of the elements of this bitset.
the predicate used to test elements.
true
if the given predicate p
holds for some of the elements
of this bitset, otherwise false
.
Selects all elements of this bitset which satisfy a predicate
Selects all elements of this bitset which satisfy a predicate.
the predicate used to test elements.
a new bitset consisting of all elements of this bitset that satisfy the given
predicate p
. The order of the elements is preserved.
Selects all elements of this bitset which do not satisfy a predicate
Selects all elements of this bitset which do not satisfy a predicate.
the predicate used to test elements.
a new bitset consisting of all elements of this bitset that do not satisfy the given
predicate p
. The order of the elements is preserved.
Finds the first element of the bitset satisfying a predicate, if any
Finds the first element of the bitset satisfying a predicate, if any.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an option value containing the first element in the bitset
that satisfies p
, or None
if none exists.
None
if iterable is empty
None
if iterable is empty.
Builds a new collection by applying a function to all elements of this bitset and concatenating the results
Builds a new collection by applying a function to all elements of this bitset and concatenating the results.
the element type of the returned collection.
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and
and the new element type B
.
a new collection of type That
resulting from applying the given collection-valued function
f
to each element of this bitset and concatenating the results.
Converts this bitset of traversable collections into a bitset in which all element collections are concatenated
Converts this bitset of traversable collections into a bitset in which all element collections are concatenated.
the type of the elements of each traversable collection.
an implicit conversion which asserts that the element type of this
bitset is a Traversable
.
a new bitset resulting from concatenating all element bitsets.
Applies a binary operator to a start value and all elements of this bitset, going left to right
Applies a binary operator to a start value and all elements of this bitset, going left to right.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this bitset$,
going left to right with the start value z
on the left:
{{{
op(...op(z, x_{1}), x_{2}, ..., x_{n})
}}}
where x,,1,,, ..., x,,n,,
are the elements of this bitset.
Applies a binary operator to all elements of this bitset and a start value, going right to left
Applies a binary operator to all elements of this bitset and a start value, going right to left.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this bitset$,
going right to left with the start value z
on the right:
{{{
op(x_{1}, op(x_{2}, ... op(x_{n}, z)...))
}}}
where x,,1,,, ..., x,,n,,
are the elements of this bitset.
Tests whether a predicate holds for all elements of this bitset
Tests whether a predicate holds for all elements of this bitset.
the predicate used to test elements.
true
if the given predicate p
holds for all elements
of this bitset, otherwise false
.
Applies a function f
to all elements of this bitset
Applies a function f
to all elements of this bitset.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the function that is applied for its side-effect to every element.
The result of function f
is discarded.
The generic builder that builds instances of BitSet define bitsetinfo Bitsets are sets of non-negative integers which are represented as variable-size arrays of bits packed into 64-bit words
The generic builder that builds instances of BitSet define bitsetinfo Bitsets are sets of non-negative integers which are represented as variable-size arrays of bits packed into 64-bit words. The size of a bitset is determined by the largest number stored in it. at arbitrary element types.
Partitions this bitset into a map of bitsets according to some discriminator function
Partitions this bitset into a map of bitsets according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new bitset.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to bitsets such that the following invariant holds:
{{{
(xs partition f)(k) = xs filter (x => f(x) == k)
}}}
That is, every key k
is bound to a bitset of those elements x
for which f(x)
equals k
.
Tests whether this bitset is known to have a finite size
Tests whether this bitset is known to have a finite size.
All strict collections are known to have finite size. For a non-strict collection
such as Stream
, the predicate returns true
if all elements have been computed.
It returns false
if the stream is not yet evaluated to the end.
Note: many collection methods will not work on collections of infinite sizes.
Returns a hash code value for the object
Returns a hash code value for the object.
The default hashing algorithm is platform dependent.
Note that it is allowed for two objects to have identical hash
codes (o1.hashCode.equals(o2.hashCode)
) yet not be
equal (o1.equals(o2)
returns false
). A
degenerate implementation could always return 0
.
However, it is required that if two objects are equal
(o1.equals(o2)
returns true
) that they
have identical hash codes
(o1.hashCode.equals(o2.hashCode)
). Therefore, when
overriding this method, be sure to verify that the behavior is
consistent with the equals
method.
Selects the first element of this bitset
Selects the first element of this bitset.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Optionally selects the first element
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Selects all elements except the last
Selects all elements except the last.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Computes the intersection between this set and another set
Computes the intersection between this set and another set.
the set to intersect with.
a new set consisting of all elements that are both in this
set and in the given set that
.
Tests if this set is empty
Tests if this set is empty.
Creates a new iterator over all elements contained in this iterable object
Creates a new iterator over all elements contained in this iterable object.
Selects the last element
Selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Optionally selects the last element
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Builds a new collection by applying a function to all elements of this bitset
Builds a new collection by applying a function to all elements of this bitset.
the element type of the returned collection.
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the function to apply to each element.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and
and the new element type B
.
a new collection of type That
resulting from applying the given function
f
to each element of this bitset and collecting the results.
Creates a new builder by applying a transformation function to the results of this builder
Creates a new builder by applying a transformation function to the results of this builder.
the type of collection returned by f
.
the transformation function.
a new builder which is the same as the current builder except that a transformation function is applied to this builder's result.
Finds the largest element
Finds the largest element.
The type over which the ordering is defined.
An ordering to be used for comparing elements.
the largest element of this bitset with respect to the ordering cmp
.
Finds the smallest element
Finds the smallest element.
The type over which the ordering is defined.
An ordering to be used for comparing elements.
the smallest element of this bitset with respect to the ordering cmp
.
Displays all elements of this bitset in a string
Displays all elements of this bitset in a string.
Displays all elements of this bitset in a string using a separator string
Displays all elements of this bitset in a string using a separator string.
the separator string.
a string representation of this bitset. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this bitset are separated by the string sep
.
Displays all elements of this bitset in a string using start, end, and separator strings
Displays all elements of this bitset in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this bitset. The resulting string
begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method toString
)
of all elements of this bitset are separated by the string sep
.
Tests whether the bitset is not empty
Tests whether the bitset is not empty.
Builds a new collection by applying a partial function to all elements of this bitset on which the function is defined
Builds a new collection by applying a partial function to all elements of this bitset on which the function is defined.
the element type of the returned collection.
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type B
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the partial function which filters and maps the bitset.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and
and the new element type B
.
a new collection of type That
resulting from applying the partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Partitions this bitset in two bitsets according to a predicate
Partitions this bitset in two bitsets according to a predicate.
the predicate on which to partition.
a pair of bitsets: the first bitset consists of all elements that
satisfy the predicate p
and the second bitset consists of all elements
that don't. The relative order of the elements in the resulting bitsets
is the same as in the original bitset.
Multiplies up the elements of this collection
Multiplies up the elements of this collection.
the result type of the *
operator.
an implicit parameter defining a set of numeric operations
which includes the *
operator to be used in forming the product.
the product of all elements of this bitset with respect to the *
operator in num
.
returns a projection that can be used to call non-strict filter
,map
, and flatMap
methods that build projections
of the collection
returns a projection that can be used to call non-strict filter
,map
, and flatMap
methods that build projections
of the collection.
Applies a binary operator to all elements of this bitset, going left to right
Applies a binary operator to all elements of this bitset, going left to right.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
the result of inserting op
between consecutive elements of this bitset$,
going left to right:
{{{
op(...(op(x_{1}, x_{2}), ... ) , x_{n})
}}}
where x,,1,,, ..., x,,n,,
are the elements of this bitset.
Optionally applies a binary operator to all elements of this bitset, going left to right
Optionally applies a binary operator to all elements of this bitset, going left to right.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op)
is this bitset is nonempty,
None
otherwise.
Applies a binary operator to all elements of this bitset, going right to left
Applies a binary operator to all elements of this bitset, going right to left.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
the result of inserting op
between consecutive elements of this bitset$,
going right to left:
{{{
op(x_{1}, op(x_{2}, ..., op(x_{n-1}, x_{n})...))
}}}
where x,,1,,, ..., x,,n,,
are the elements of this bitset.
Optionally applies a binary operator to all elements of this bitset, going right to left
Optionally applies a binary operator to all elements of this bitset, going right to left.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op)
is this bitset is nonempty,
None
otherwise.
Removes an element from this set
Removes an element from this set.
The element to be removed.
true
if the element was previously present in the set, false
otherwise.
The collection of type bitset underlying this TraversableLike
object
The collection of type bitset underlying this TraversableLike
object.
By default this is implemented as the TraversableLike
object itself, but this can be overridden.
The result when this set is used as a builder
Removes all elements from the set for which do not satisfy a predicate
Removes all elements from the set for which do not satisfy a predicate.
the predicate used to test elements. Only elements for
while p
returns true
are retained in the set; all others
are removed.
Checks if the other iterable collection contains the same elements in the same order as this bitset
Checks if the other iterable collection contains the same elements in the same order as this bitset.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements of collection that
.
the collection to compare with.
true
, if both collections contain the same elements in the same order, false
otherwise.
The size of this bitset
The size of this bitset.
Gives a hint how many elements are expected to be added
when the next result
is called
Gives a hint how many elements are expected to be added
when the next result
is called. Some builder classes
will optimize their representation based on the hint. However,
builder implementations are still required to work correctly even if the hint is
wrong, i.e. a different number of elements is added.
Selects an interval of elements
Selects an interval of elements.
Note: c.slice(from, to)
is equivalent to (but possibly more efficient than)
c.drop(from).take(to - from)
Note: might return different results for different runs, unless the underlying collection type is ordered.
the index of the first returned element in this bitset.
the index one past the last returned element in this bitset.
a bitset containing the elements starting at index from
and extending up to (but not including) index until
of this bitset.
Spits this bitset into a prefix/suffix pair according to a predicate
Spits this bitset into a prefix/suffix pair according to a predicate.
Note: c span p
is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p)
, provided the evaluation of the predicate p
does not cause any side-effects.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the test predicate
a pair consisting of the longest prefix of this bitset whose
elements all satisfy p
, and the rest of this bitset.
Splits this bitset into two at a given position
Splits this bitset into two at a given position.
Note: c splitAt n
is equivalent to (but possibly more efficient than)
(c take n, c drop n)
.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of bitsets consisting of the first n
elements of this bitset, and the other elements.
Defines the prefix of this object's toString
representation
Defines the prefix of this object's toString
representation.
Tests whether this bitset is a subset of another bitset
Tests whether this bitset is a subset of another bitset.
Tests whether this set is a subset of another set
Tests whether this set is a subset of another set.
the set to test.
true
if this set is a subset of that
, i.e. if
every element of this set is also an element of that
.
Sums up the elements of this collection
Sums up the elements of this collection.
the result type of the +
operator.
an implicit parameter defining a set of numeric operations
which includes the +
operator to be used in forming the sum.
the sum of all elements of this bitset with respect to the +
operator in num
.
Selects all elements except the first
Selects all elements except the first.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Selects first n elements
Selects first n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Tt number of elements to take from this bitset.
a bitset consisting only of the first n
elements of this bitset, or else the
whole bitset, if it has less than n
elements.
Selects last n elements
Selects last n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to take
a bitset consisting only of the last n
elements of this bitset, or else the
whole bitset, if it has less than n
elements.
Takes longest prefix of elements that satisfy a predicate
Takes longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The predicate used to test elements.
the longest prefix of this bitset whose elements all satisfy
the predicate p
.
Converts this bitset to an array
Converts this bitset to an array.
the type of the elements of the array. A ClassManifest
for this type must
be available.
an array containing all elements of this bitset.
Wraps this bitset as an immutable bitset backed by the array of bits of this bitset
Wraps this bitset as an immutable bitset backed by the array of bits of this bitset.
Converts this bitset to an indexed sequence
Converts this bitset to an indexed sequence.
Converts this bitset to an iterable collection
Converts this bitset to an iterable collection.
Note: Will not terminate for infinite-sized collections.
Converts this bitset to a list
Converts this bitset to a list.
Converts this bitset to a sequence
Converts this bitset to a sequence.
Converts this bitset to a set
Converts this bitset to a set.
Converts this bitset to a stream
Converts this bitset to a stream.
Converts this bitset to a string
Converts this bitset to a string
Transposes this bitset of traversable collections into
Transposes this bitset of traversable collections into
Computes the union between of set and another set
Computes the union between of set and another set.
the set to form the union with.
a new set consisting of all elements that are in this
set or in the given set that
.
Converts this bitset of pairs into two collections of the first and second halfs of each pair
Converts this bitset of pairs into two collections of the first and second halfs of each pair.
an implicit conversion which asserts that the element type of this bitset is a pair.
a pair bitsets, containing the first, respectively second half of each element pair of this bitset.
Updates the presence of a single element in this set
Updates the presence of a single element in this set.
This method allows one to add or remove an element elem
from this set depending on the value of parameter included
.
Typically, one would use the following syntax:
{{{
set(elem) = true // adds element
set(elem) = false // removes element
}}}
the element to be added or removed
a flag indicating whether element should be included or excluded.
Creates a non-strict view of a slice of this bitset
Creates a non-strict view of a slice of this bitset.
Note: the difference between view
and slice
is that view
produces
a view of the current bitset, whereas slice
produces a new bitset.
Note: view(from, to)
is equivalent to view.slice(from, to)
Note: might return different results for different runs, unless the underlying collection type is ordered.
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this bitset, starting at index from
and extending up to (but not including) index until
.
Creates a non-strict view of this bitset
Creates a non-strict view of this bitset.
Creates a non-strict filter of this bitset
Creates a non-strict filter of this bitset.
Note: the difference between c filter p
and c withFilter p
is that
the former creates a new collection, whereas the latter only restricts
the domain of subsequent map
, flatMap
, foreach
, and withFilter
operations.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an object of class WithFilter
, which supports
map
, flatMap
, foreach
, and withFilter
operations.
All these operations apply to those elements of this bitset which
satify the predicate p
.
Returns a bitset formed from this bitset and another iterable collection by combining corresponding elements in pairs
Returns a bitset formed from this bitset and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A
).
the type of the second half of the returned pairs
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type (A1, B)
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, B), That]
.
is found.
The iterable providing the second half of each result pair
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type (A1, B)
.
a new collection of type That
containing pairs consisting of
corresponding elements of this bitset and that
. The length
of the returned collection is the minimum of the lengths of this bitset$ and that
.
Returns a bitset formed from this bitset and another iterable collection by combining corresponding elements in pairs
Returns a bitset formed from this bitset and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this bitset is shorter than that
.
the element to be used to fill up the result if that
is shorter than this bitset.
a new collection of type That
containing pairs consisting of
corresponding elements of this bitset and that
. The length
of the returned collection is the maximum of the lengths of this bitset$ and that
.
If this bitset is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this bitset, thatElem
values are used to pad the result.
Zips this bitset with its indices
Zips this bitset with its indices.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A
).
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type (A1, Int)
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, Int), That]
.
is found.
A new collection of type That
containing pairs consisting of all elements of this
bitset paired with their index. Indices start at 0
.
Computes the union between this bitset and another bitset by performing a bitwise "or"
Computes the union between this bitset and another bitset by performing a bitwise "or".
the bitset to form the union with.
a new bitset consisting of all bits that are in this
bitset or in the given bitset other
.
Computes the union between this set and another set
Computes the union between this set and another set.
the set to form the union with.
a new set consisting of all elements that are in this
set or in the given set that
.
A class for mutable bitsets. $bitsetinfo