The type implementing this traversable
A class supporting filtered operations .
o != arg0 is the same as !(o == (arg0)).
o != arg0 is the same as !(o == (arg0)).
the object to compare against this object for dis-equality .
false if the receiver object is equivalent to the argument; true otherwise.
[use case] Concatenates this immutable stack with the elements of a traversable collection .
Concatenates this immutable stack with the elements of a traversable collection .
the traversable to append .
a new immutable stack which contains all elements of this immutable stack
followed by all elements of that.
Concatenates this immutable stack with the elements of a traversable collection .
Concatenates this immutable stack with the elements of a traversable collection .
the element type of the returned collection .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the traversable to append .
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That which contains all elements of this immutable stack
followed by all elements of that.
[use case] Prepends an element to this immutable stack
Prepends an element to this immutable stack
the prepended element
a new immutable stack consisting of elem followed
by all elements of this immutable stack.
Prepends an element to this immutable stack
Prepends an element to this immutable stack
the element type of the returned immutable stack .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the prepended element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That consisting of elem followed
by all elements of this immutable stack.
Applies a binary operator to a start value and all elements of this immutable stack, going left to right .
Applies a binary operator to a start value and all elements of this immutable stack, going left to right .
Note: /: is alternate syntax for foldLeft; z /: xs is the same as xs foldLeft z.
the result type of the binary operator .
the start value .
the binary operator .
the result of inserting op between consecutive elements of this immutable stack,
going left to right with the start value z on the left:
op(...op(op(z, x1), x2), ..., xn)
where x,,1,,, ..., x,,n,, are the elements of this immutable stack.
[use case] Appends an element to this immutable stack
Appends an element to this immutable stack
the appended element
a new immutable stack consisting of
all elements of this immutable stack followed by elem.
Appends an element to this immutable stack
Appends an element to this immutable stack
the element type of the returned immutable stack .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the appended element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That consisting of
all elements of this immutable stack followed by elem.
Applies a binary operator to all elements of this immutable stack and a start value, going right to left .
Applies a binary operator to all elements of this immutable stack and a start value, going right to left .
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as xs foldRight z.
the result type of the binary operator .
the start value
the binary operator
the result of inserting op between consecutive elements of this immutable stack,
going right to left with the start value z on the right:
op(x1, op(x2, ... op(xn, z)...))
where x,,1,,, ..., x,,n,, are the elements of this immutable stack.
o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).
o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).
the object to compare against this object for equality .
true if the receiver object is equivalent to the argument; false otherwise.
o == arg0 is the same as o.equals(arg0).
o == arg0 is the same as o.equals(arg0).
the object to compare against this object for equality .
true if the receiver object is equivalent to the argument; false otherwise.
Appends all elements of this immutable stack to a string builder .
Appends all elements of this immutable stack to a string builder.
The written text consists of the string representations (w.r.t. the method toString)
of all elements of this immutable stack without any separator string.
the string builder to which elements are appended .
the string builder b to which elements were appended.
Appends all elements of this immutable stack to a string builder using a separator string .
Appends all elements of this immutable stack to a string builder using a separator string.
The written text consists of the string representations (w.r.t. the method toString)
of all elements of this immutable stack, separated by the string sep.
the string builder to which elements are appended .
the separator string .
the string builder b to which elements were appended.
Appends all elements of this immutable stack to a string builder using start, end, and separator strings .
Appends all elements of this immutable stack to a string builder using start, end, and separator strings.
The written text begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method toString)
of all elements of this immutable stack are separated by the string sep.
the string builder to which elements are appended .
the starting string .
the separator string .
the ending string .
the string builder b to which elements were appended.
Composes this partial function with a transformation function that gets applied to results of this partial function .
Composes this partial function with a transformation function that gets applied to results of this partial function .
the result type of the transformation function .
the transformation function
a partial function with the same domain as this partial function, which maps
arguments x to k(this(x)).
Selects an element by its index in the immutable stack .
Selects an element by its index in the immutable stack.
Note: the execution of apply may take time proportial to the index value.
This method is used to cast the receiver object to be of type T0.
This method is used to cast the receiver object to be of type T0.
Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expressionList(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as
part of compilation it is not possible to check whether the contents of the list are of the requested typed.
the receiver object .
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind .
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind .
The object with which this immutable stack should be compared
true, if this immutable stack can possibly equal that, false otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
This method creates and returns a copy of the receiver object .
This method creates and returns a copy of the receiver object .
The default implementation of the clone method is platform dependent.
a copy of the receiver object .
[use case] Builds a new collection by applying a partial function to all elements of this immutable stack on which the function is defined .
Builds a new collection by applying a partial function to all elements of this immutable stack on which the function is defined .
the element type of the returned collection .
the partial function which filters and maps the immutable stack .
a new immutable stack resulting from applying the given partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Builds a new collection by applying a partial function to all elements of this immutable stack on which the function is defined .
Builds a new collection by applying a partial function to all elements of this immutable stack on which the function is defined .
the element type of the returned collection .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the partial function which filters and maps the immutable stack .
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That resulting from applying the partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
The factory companion object that builds instances of class immutable .
The factory companion object that builds instances of class immutable . Stack.
(f compose g)(x) == f(g(x))
(f compose g)(x) == f(g(x))
Tests whether this immutable stack contains a given value as an element .
Tests whether this immutable stack contains a given value as an element .
the element to test .
true if this immutable stack has an element that is
is equal (wrt ==) to elem, false otherwise.
Tests whether this immutable stack contains a given sequence as a slice .
Tests whether this immutable stack contains a given sequence as a slice .
the sequence to test
true if this immutable stack contains a slice with the same elements
as that, otherwise false.
[use case] Copies elements of this immutable stack to an array .
Copies elements of this immutable stack to an array.
Fills the given array xs with at most len elements of
this immutable stack, starting at position start.
Copying will stop once either the end of the current immutable stack is reached,
or the end of the array is reached, or len elements have been copied.
the array to fill .
the starting index .
the maximal number of elements to copy .
Copies elements of this immutable stack to an array .
Copies elements of this immutable stack to an array.
Fills the given array xs with at most len elements of
this immutable stack, starting at position start.
Copying will stop once either the end of the current immutable stack is reached,
or the end of the array is reached, or len elements have been copied.
the type of the elements of the array .
the array to fill .
the starting index .
the maximal number of elements to copy .
[use case] Copies values of this immutable stack to an array .
Copies values of this immutable stack to an array.
Fills the given array xs with values of this immutable stack.
Copying will stop once either the end of the current immutable stack is reached,
or the end of the array is reached.
the array to fill .
Copies values of this immutable stack to an array .
Copies values of this immutable stack to an array.
Fills the given array xs with values of this immutable stack.
Copying will stop once either the end of the current immutable stack is reached,
or the end of the array is reached.
the type of the elements of the array .
the array to fill .
[use case] Copies values of this immutable stack to an array .
Copies values of this immutable stack to an array.
Fills the given array xs with values of this immutable stack, after skipping start values.
Copying will stop once either the end of the current immutable stack is reached,
or the end of the array is reached.
the array to fill .
the starting index .
Copies values of this immutable stack to an array .
Copies values of this immutable stack to an array.
Fills the given array xs with values of this immutable stack, after skipping start values.
Copying will stop once either the end of the current immutable stack is reached,
or the end of the array is reached.
the type of the elements of the array .
the array to fill .
the starting index .
Copies all elements of this immutable stack to a buffer .
Copies all elements of this immutable stack to a buffer .
The buffer to which elements are copied .
Tests whether every element of this immutable stack relates to the corresponding element of another sequence by satisfying a test predicate .
Tests whether every element of this immutable stack relates to the corresponding element of another sequence by satisfying a test predicate .
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true if both sequences have the same length and
p(x, y) is true for all corresponding elements x of this immutable stack
and y of that, otherwise false.
Counts the number of elements in the immutable stack which satisfy a predicate .
Counts the number of elements in the immutable stack which satisfy a predicate .
the predicate used to test elements .
the number of elements satisfying the predicate p.
[use case] Computes the multiset difference between this immutable stack and another sequence .
Computes the multiset difference between this immutable stack and another sequence .
the sequence of elements to remove
a new immutable stack which contains all elements of this immutable stack
except some of occurrences of elements that also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will not form
part of the result, but any following occurrences will.
Computes the multiset difference between this immutable stack and another sequence .
Computes the multiset difference between this immutable stack and another sequence .
the element type of the returned immutable stack .
the sequence of elements to remove
a new collection of type That which contains all elements of this immutable stack
except some of occurrences of elements that also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will not form
part of the result, but any following occurrences will.
Builds a new immutable stack from this immutable stack without any duplicate elements .
Builds a new immutable stack from this immutable stack without any duplicate elements .
A new immutable stack which contains the first occurrence of every element of this immutable stack .
Selects all elements except first n ones.
Selects all elements except first n ones.
the number of elements to drop from this immutable stack .
a immutable stack consisting of all elements of this immutable stack except the first n ones, or else the
empty immutable stack, if this immutable stack has less than n elements.
Selects all elements except last n ones.
Selects all elements except last n ones.
The number of elements to take
a immutable stack consisting of all elements of this immutable stack except the first n ones, or else the
empty immutable stack, if this immutable stack has less than n elements.
Drops longest prefix of elements that satisfy a predicate .
Drops longest prefix of elements that satisfy a predicate .
The predicate used to test elements .
the longest suffix of this immutable stack whose first element
does not satisfy the predicate p.
use iterator' instead
Tests whether this immutable stack ends with the given sequence .
Tests whether this immutable stack ends with the given sequence .
the sequence to test
true if this immutable stack has that as a suffix, false otherwise.
This method is used to test whether the argument (arg0) is a reference to the
receiver object (this).
This method is used to test whether the argument (arg0) is a reference to the
receiver object (this).
The eq method implements an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence relation] on
non-null instances of AnyRef:
* It is reflexive: for any non-null instance x of type AnyRef, x.eq(x) returns true.
* It is symmetric: for any non-null instances x and y of type AnyRef, x.eq(y) returns true if and
only if y.eq(x) returns true.
* It is transitive: for any non-null instances x, y, and z of type AnyRef if x.eq(y) returns true and y.eq(z) returns true, then x.eq(z) returns true.
Additionally, the eq method has three other properties.
* It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of
x.eq(y) consistently returns true or consistently returns false.
* For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false.
* null.eq(null) returns true.
When overriding the equals or hashCode methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they
should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).
the object to compare against this object for reference equality .
true if the argument is a reference to the receiver object; false otherwise.
The equality method defined in AnyRef.
Tests whether every element of this immutable stack relates to the corresponding element of another sequence by satisfying a test predicate .
Tests whether every element of this immutable stack relates to the corresponding element of another sequence by satisfying a test predicate .
the type of the elements of that
the other sequence
true if both sequences have the same length and
p(x, y) is true for all corresponding elements x of this immutable stack
and y of that, otherwise false.
use corresponds instead
Tests whether a predicate holds for some of the elements of this immutable stack .
Tests whether a predicate holds for some of the elements of this immutable stack .
the predicate used to test elements .
true if the given predicate p holds for some of the elements
of this immutable stack, otherwise false.
Selects all elements of this immutable stack which satisfy a predicate .
Selects all elements of this immutable stack which satisfy a predicate .
the predicate used to test elements .
a new immutable stack consisting of all elements of this immutable stack that satisfy the given
predicate p. The order of the elements is preserved.
Selects all elements of this immutable stack which do not satisfy a predicate .
Selects all elements of this immutable stack which do not satisfy a predicate .
the predicate used to test elements .
a new immutable stack consisting of all elements of this immutable stack that do not satisfy the given
predicate p. The order of the elements is preserved.
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object .
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object .
The details of when and if the finalize method are invoked, as well as the interaction between finalizeand non-local returns and exceptions, are all platform dependent.
Finds the first element of the immutable stack satisfying a predicate, if any .
Finds the first element of the immutable stack satisfying a predicate, if any .
the predicate used to test elements .
an option value containing the first element in the immutable stack
that satisfies p, or None if none exists.
Returns index of the first element satisfying a predicate, or -1.
Returns index of the first element satisfying a predicate, or -1.
Returns index of the last element satisfying a predicate, or -1 .
Returns index of the last element satisfying a predicate, or -1 .
use lastIndexWhere instead
use head' instead
None if iterable is empty.
[use case] Builds a new collection by applying a function to all elements of this immutable stack and concatenating the results .
Builds a new collection by applying a function to all elements of this immutable stack and concatenating the results .
the element type of the returned collection .
the function to apply to each element .
a new immutable stack resulting from applying the given collection-valued function
f to each element of this immutable stack and concatenating the results.
Builds a new collection by applying a function to all elements of this immutable stack and concatenating the results .
Builds a new collection by applying a function to all elements of this immutable stack and concatenating the results .
the element type of the returned collection .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the function to apply to each element .
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That resulting from applying the given collection-valued function
f to each element of this immutable stack and concatenating the results.
[use case] Converts this immutable stack of traversable collections into a immutable stack in which all element collections are concatenated .
Converts this immutable stack of traversable collections into a immutable stack in which all element collections are concatenated .
the type of the elements of each traversable collection .
a new immutable stack resulting from concatenating all element immutable stacks .
Converts this immutable stack of traversable collections into a immutable stack in which all element collections are concatenated .
Converts this immutable stack of traversable collections into a immutable stack in which all element collections are concatenated .
the type of the elements of each traversable collection .
an implicit conversion which asserts that the element type of this
immutable stack is a Traversable.
a new immutable stack resulting from concatenating all element immutable stacks .
Applies a binary operator to a start value and all elements of this immutable stack, going left to right .
Applies a binary operator to a start value and all elements of this immutable stack, going left to right .
the result type of the binary operator .
the start value .
the result of inserting op between consecutive elements of this immutable stack,
going left to right with the start value z on the left:
op(...op(z, x1), x2, ..., xn)
where x,,1,,, ..., x,,n,, are the elements of this immutable stack.
Applies a binary operator to all elements of this immutable stack and a start value, going right to left .
Applies a binary operator to all elements of this immutable stack and a start value, going right to left .
the result type of the binary operator .
the start value .
the result of inserting op between consecutive elements of this immutable stack,
going right to left with the start value z on the right:
op(x1, op(x2, ... op(xn, z)...))
where x,,1,,, ..., x,,n,, are the elements of this immutable stack.
Tests whether a predicate holds for all elements of this immutable stack .
Tests whether a predicate holds for all elements of this immutable stack .
the predicate used to test elements .
true if the given predicate p holds for all elements
of this immutable stack, otherwise false.
[use case] Applies a function f to all elements of this immutable stack.
Applies a function f to all elements of this immutable stack.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Applies a function f to all elements of this immutable stack.
Applies a function f to all elements of this immutable stack.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
The generic builder that builds instances of immutable .
The generic builder that builds instances of immutable . Stack at arbitrary element types.
Returns a representation that corresponds to the dynamic class of the receiver object .
Returns a representation that corresponds to the dynamic class of the receiver object .
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object .
Partitions this immutable stack into a map of immutable stacks according to some discriminator function .
Partitions this immutable stack into a map of immutable stacks according to some discriminator function .
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new immutable stack.
the type of keys returned by the discriminator function .
the discriminator function .
A map from keys to immutable stacks such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k)
That is, every key k is bound to a immutable stack of those elements x for which f(x) equals k.
Partitions elements in fixed size immutable stacks .
Partitions elements in fixed size immutable stacks .
the number of elements per group
An iterator producing immutable stacks of size size, except the
last will be truncated if the elements don't divide evenly.
Iterator#grouped
Tests whether this immutable stack is known to have a finite size .
Tests whether this immutable stack is known to have a finite size.
All strict collections are known to have finite size. For a non-strict collection
such as Stream, the predicate returns true if all elements have been computed.
It returns false if the stream is not yet evaluated to the end.
Note: many collection methods will not work on collections of infinite sizes.
true if this collection is known to have finite size, false otherwise.
Hashcodes for immutable .
Hashcodes for immutable . Stack produce a value from the hashcodes of all the elements of the immutable stack.@return the hash code value for the object. */
Selects the first element of this immutable stack .
Selects the first element of this immutable stack .
the first element of this immutable stack .
Optionally selects the first element .
Optionally selects the first element .
the first element of this immutable stack if it is nonempty, None if it is empty.
[use case] Finds index of first occurrence of some value in this immutable stack after or at some start index .
Finds index of first occurrence of some value in this immutable stack after or at some start index .
the element value to search for .
the start index
the index >= from of the first element of this immutable stack that is equal (wrt ==)
to elem, or -1, if none exists.
Finds index of first occurrence of some value in this immutable stack after or at some start index .
Finds index of first occurrence of some value in this immutable stack after or at some start index .
the type of the element elem.
the element value to search for .
the start index
the index >= from of the first element of this immutable stack that is equal (wrt ==)
to elem, or -1, if none exists.
[use case] Finds index of first occurrence of some value in this immutable stack .
Finds index of first occurrence of some value in this immutable stack .
the element value to search for .
the index of the first element of this immutable stack that is equal (wrt ==)
to elem, or -1, if none exists.
Finds index of first occurrence of some value in this immutable stack .
Finds index of first occurrence of some value in this immutable stack .
the type of the element elem.
the element value to search for .
the index of the first element of this immutable stack that is equal (wrt ==)
to elem, or -1, if none exists.
Finds first index after or at a start index where this immutable stack contains a given sequence as a slice .
Finds first index after or at a start index where this immutable stack contains a given sequence as a slice .
the sequence to test
the start index
the first index >= from such that the elements of this immutable stack starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds first index where this immutable stack contains a given sequence as a slice .
Finds first index where this immutable stack contains a given sequence as a slice .
the sequence to test
the first index such that the elements of this immutable stack starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index .
Finds index of the first element satisfying some predicate after or at some start index .
the predicate used to test elements .
the start index
the index >= from of the first element of this immutable stack that satisfies the predicate p,
or -1, if none exists.
Finds index of first element satisfying some predicate .
Finds index of first element satisfying some predicate .
the predicate used to test elements .
the index of the first element of this immutable stack that satisfies the predicate p,
or -1, if none exists.
Produces the range of all indices of this sequence .
Produces the range of all indices of this sequence .
a Range value from 0 to one less than the length of this immutable stack.
Selects all elements except the last .
Selects all elements except the last .
a immutable stack consisting of all elements of this immutable stack except the last one .
[use case] Computes the multiset intersection between this immutable stack and another sequence .
Computes the multiset intersection between this immutable stack and another sequence .
the sequence of elements to intersect with .
a new immutable stack which contains all elements of this immutable stack
which also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will be retained
in the result, but any following occurrences will be omitted.
Computes the multiset intersection between this immutable stack and another sequence .
Computes the multiset intersection between this immutable stack and another sequence .
the element type of the returned immutable stack .
the sequence of elements to intersect with .
a new collection of type That which contains all elements of this immutable stack
which also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will be retained
in the result, but any following occurrences will be omitted.
Tests whether this immutable stack contains given index .
Tests whether this immutable stack contains given index .
The implementations of methods apply and isDefinedAt turn a Seq[A] into
a PartialFunction[Int, A].
true if this immutable stack contains an element at position idx, false otherwise.
Checks if this stack is empty .
Checks if this stack is empty .
true, iff there is no element on the stack .
This method is used to test whether the dynamic type of the receiver object is T0.
This method is used to test whether the dynamic type of the receiver object is T0.
Note that the test result of the test is modulo Scala's erasure semantics. Therefore the expression1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will
return true. In the latter example, because the type argument is erased as part of compilation it is not
possible to check whether the contents of the list are of the requested typed.
true if the receiver object is an instance of erasure of type T0; false otherwise.
Tests whether this immutable stack can be repeatedly traversed .
Tests whether this immutable stack can be repeatedly traversed .
true
Returns an iterator over all elements on the stack .
Returns an iterator over all elements on the stack . The iterator issues elements in the reversed order they were inserted into the stack (LIFO order).
an iterator over all stack elements .
Selects the last element .
Selects the last element .
the first element of this immutable stack .
[use case] Finds index of last occurrence of some value in this immutable stack before or at a given end index .
Finds index of last occurrence of some value in this immutable stack before or at a given end index .
the element value to search for .
the end index .
the index <= end of the last element of this immutable stack that is equal (wrt ==)
to elem, or -1, if none exists.
Finds index of last occurrence of some value in this immutable stack before or at a given end index .
Finds index of last occurrence of some value in this immutable stack before or at a given end index .
the type of the element elem.
the element value to search for .
the end index .
the index <= end of the last element of this immutable stack that is equal (wrt ==)
to elem, or -1, if none exists.
[use case] Finds index of last occurrence of some value in this immutable stack .
Finds index of last occurrence of some value in this immutable stack .
the element value to search for .
the index of the last element of this immutable stack that is equal (wrt ==)
to elem, or -1, if none exists.
Finds index of last occurrence of some value in this immutable stack .
Finds index of last occurrence of some value in this immutable stack .
the type of the element elem.
the element value to search for .
the index of the last element of this immutable stack that is equal (wrt ==)
to elem, or -1, if none exists.
Finds last index before or at a given end index where this immutable stack contains a given sequence as a slice .
Finds last index before or at a given end index where this immutable stack contains a given sequence as a slice .
the sequence to test
the end index
the last index <= end such that the elements of this immutable stack starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds last index where this immutable stack contains a given sequence as a slice .
Finds last index where this immutable stack contains a given sequence as a slice .
the sequence to test
the last index such that the elements of this immutable stack starting a this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index .
Finds index of last element satisfying some predicate before or at given end index .
the predicate used to test elements .
the index <= end of the last element of this immutable stack that satisfies the predicate p,
or -1, if none exists.
Finds index of last element satisfying some predicate .
Finds index of last element satisfying some predicate .
the predicate used to test elements .
the index of the last element of this immutable stack that satisfies the predicate p,
or -1, if none exists.
Optionally selects the last element .
Optionally selects the last element .
the last element of this immutable stack$ if it is nonempty, None if it is empty.
The length of the immutable stack .
The length of the immutable stack .
Note: the execution of length may take time proportial to the length of the sequence.@return the number of elements in this immutable stack.
Compares the length of this immutable stack to a test value .
Compares the length of this immutable stack to a test value .
the test value that gets compared with the length .
A value x where
x < 0 if this.length < len
x == 0 if this.length == len
x > 0 if this.length > len
The method as implemented here does not call length directly; its running time
is O(length min len) instead of O(length). The method should be overwritten
if computing length is cheap.
Turns this partial function into an plain function returning an Option result.
Turns this partial function into an plain function returning an Option result.
a function that takes an argument x to Some(this(x)) if this is defined for x, and to None otherwise.
[use case] Builds a new collection by applying a function to all elements of this immutable stack .
Builds a new collection by applying a function to all elements of this immutable stack .
the element type of the returned collection .
the function to apply to each element .
a new immutable stack resulting from applying the given function
f to each element of this immutable stack and collecting the results.
Builds a new collection by applying a function to all elements of this immutable stack .
Builds a new collection by applying a function to all elements of this immutable stack .
the element type of the returned collection .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the function to apply to each element .
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That resulting from applying the given function
f to each element of this immutable stack and collecting the results.
[use case] Finds the largest element .
Finds the largest element .
the largest element of this immutable stack .
Finds the largest element .
Finds the largest element .
The type over which the ordering is defined .
An ordering to be used for comparing elements .
the largest element of this immutable stack with respect to the ordering cmp.
[use case] Finds the smallest element .
Finds the smallest element .
the smallest element of this immutable stack
Finds the smallest element .
Finds the smallest element .
The type over which the ordering is defined .
An ordering to be used for comparing elements .
the smallest element of this immutable stack with respect to the ordering cmp.
Displays all elements of this immutable stack in a string .
Displays all elements of this immutable stack in a string .
a string representation of this immutable stack. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this immutable stack follow each other without any separator string.
Displays all elements of this immutable stack in a string using a separator string .
Displays all elements of this immutable stack in a string using a separator string .
the separator string .
a string representation of this immutable stack. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this immutable stack are separated by the string sep.
Displays all elements of this immutable stack in a string using start, end, and separator strings .
Displays all elements of this immutable stack in a string using start, end, and separator strings .
the starting string .
the separator string .
the ending string .
a string representation of this immutable stack. The resulting string
begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method toString)
of all elements of this immutable stack are separated by the string sep.
o.ne(arg0) is the same as !(o.eq(arg0)).
o.ne(arg0) is the same as !(o.eq(arg0)).
the object to compare against this object for reference dis-equality .
false if the argument is not a reference to the receiver object; true otherwise.
The builder that builds instances of type immutable .
The builder that builds instances of type immutable . Stack[A]
Tests whether the immutable stack is not empty .
Tests whether the immutable stack is not empty .
true if the immutable stack contains at least one element, false otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor .
Wakes up a single thread that is waiting on the receiver object's monitor .
Wakes up all threads that are waiting on the receiver object's monitor .
Wakes up all threads that are waiting on the receiver object's monitor .
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined .
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined .
the argument type of the fallback function
the result type of the fallback function
the fallback function
a partial function which has as domain the union of the domains
of this partial function and that. The resulting partial function
takes x to this(x) where this is defined, and to that(x) where it is not.
[use case] Appends an element value to this immutable stack until a given target length is reached .
Appends an element value to this immutable stack until a given target length is reached .
the target length
the padding value
a new immutable stack consisting of
all elements of this immutable stack followed by the minimal number of occurrences of elem so
that the resulting immutable stack has a length of at least len.
Appends an element value to this immutable stack until a given target length is reached .
Appends an element value to this immutable stack until a given target length is reached .
the element type of the returned immutable stack .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the target length
the padding value
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That consisting of
all elements of this immutable stack followed by the minimal number of occurrences of elem so
that the resulting collection has a length of at least len.
Partitions this immutable stack in two immutable stacks according to a predicate .
Partitions this immutable stack in two immutable stacks according to a predicate .
the predicate on which to partition .
a pair of immutable stacks: the first immutable stack consists of all elements that
satisfy the predicate p and the second immutable stack consists of all elements
that don't. The relative order of the elements in the resulting immutable stacks
is the same as in the original immutable stack.
[use case] Produces a new immutable stack where a slice of elements in this immutable stack is replaced by another sequence .
Produces a new immutable stack where a slice of elements in this immutable stack is replaced by another sequence .
the index of the first replaced element
the number of elements to drop in the original immutable stack
a new immutable stack consisting of all elements of this immutable stack
except that replaced elements starting from from are replaced
by patch.
Produces a new immutable stack where a slice of elements in this immutable stack is replaced by another sequence .
Produces a new immutable stack where a slice of elements in this immutable stack is replaced by another sequence .
the element type of the returned immutable stack .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the index of the first replaced element
the replacement sequence
the number of elements to drop in the original immutable stack
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new immutable stack consisting of all elements of this immutable stack
except that replaced elements starting from from are replaced
by patch.
Removes the top element from the stack .
Removes the top element from the stack . Note: should return (A, Stack[A]) as for queues (mics)
the new stack without the former top element .
Returns the length of the longest prefix whose elements all satisfy some predicate .
Returns the length of the longest prefix whose elements all satisfy some predicate .
the predicate used to test elements .
the length of the longest prefix of this immutable stack
such that every element of the segment satisfies the predicate p.
[use case] Multiplies up the elements of this collection .
Multiplies up the elements of this collection .
the product of all elements in this immutable stack of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the immutable stack and as result type of product.
Examples of such types are: Long, Float, Double, BigInt.
Multiplies up the elements of this collection .
Multiplies up the elements of this collection .
the result type of the * operator.
an implicit parameter defining a set of numeric operations
which includes the * operator to be used in forming the product.
the product of all elements of this immutable stack with respect to the * operator in num.
returns a projection that can be used to call non-strict filter, map, and flatMap methods that build projections of the collection .
returns a projection that can be used to call non-strict filter, map, and flatMap methods that build projections of the collection .
use view' instead
Push a sequence of elements onto the stack .
Push a sequence of elements onto the stack . The last element of the sequence will be on top of the new stack.
the element sequence .
the stack with the new elements on top .
Push an element on the stack .
Push an element on the stack .
the element to push on the stack .
the stack with the new element on top .
Push all elements provided by the given traversable object onto the stack .
Push all elements provided by the given traversable object onto the stack . The last element returned by the traversable object will be on top of the new stack.
the stack with the new elements on top .
Applies a binary operator to all elements of this immutable stack, going left to right .
Applies a binary operator to all elements of this immutable stack, going left to right .
the result type of the binary operator .
the result of inserting op between consecutive elements of this immutable stack,
going left to right:
op(...(op(x1, x2), ... ) , xn)
where x,,1,,, ..., x,,n,, are the elements of this immutable stack.
Optionally applies a binary operator to all elements of this immutable stack, going left to right .
Optionally applies a binary operator to all elements of this immutable stack, going left to right .
the result type of the binary operator .
the binary operator .
an option value containing the result of reduceLeft(op) is this immutable stack is nonempty,
None otherwise.
Applies a binary operator to all elements of this immutable stack, going right to left .
Applies a binary operator to all elements of this immutable stack, going right to left .
the result type of the binary operator .
the binary operator .
the result of inserting op between consecutive elements of this immutable stack,
going right to left:
op(x1, op(x2, ..., op(xn-1, xn)...))
where x,,1,,, ..., x,,n,, are the elements of this immutable stack.
Optionally applies a binary operator to all elements of this immutable stack, going right to left .
Optionally applies a binary operator to all elements of this immutable stack, going right to left .
the result type of the binary operator .
the binary operator .
an option value containing the result of reduceRight(op) is this immutable stack is nonempty,
None otherwise.
The collection of type immutable stack underlying this TraversableLike object.
The collection of type immutable stack underlying this TraversableLike object.
By default this is implemented as the TraversableLike object itself, but this can be overridden.
Returns new immutable stack wih elements in reversed order .
An iterator yielding elements in reversed order .
An iterator yielding elements in reversed order .
Note: xs.reverseIterator is the same as xs.reverse.iterator but might be more efficient.
an iterator yielding the elements of this immutable stack in reversed order
[use case] Builds a new collection by applying a function to all elements of this immutable stack and collecting the results in reversed order .
Builds a new collection by applying a function to all elements of this immutable stack and collecting the results in reversed order .
the element type of the returned collection .
Note: xs.reverseMap(f) is the same as xs.reverse.map(f) but might be more efficient.
the function to apply to each element .
a new immutable stack resulting from applying the given function
f to each element of this immutable stack and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this immutable stack and collecting the results in reversed order .
Builds a new collection by applying a function to all elements of this immutable stack and collecting the results in reversed order .
Note: xs.reverseMap(f) is the same as xs.reverse.map(f) but might be more efficient.
the element type of the returned collection .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the function to apply to each element .
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That resulting from applying the given function
f to each element of this immutable stack and collecting the results in reversed order.
use reverseIterator' instead
[use case] Checks if the other iterable collection contains the same elements in the same order as this immutable stack .
Checks if the other iterable collection contains the same elements in the same order as this immutable stack .
the collection to compare with .
true, if both collections contain the same elements in the same order, false otherwise.
Checks if the other iterable collection contains the same elements in the same order as this immutable stack .
Checks if the other iterable collection contains the same elements in the same order as this immutable stack .
the type of the elements of collection that.
the collection to compare with .
true, if both collections contain the same elements in the same order, false otherwise.
Produces a collection containing cummulative results of applying the operator going left to right .
Produces a collection containing cummulative results of applying the operator going left to right .
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
collection with intermediate results
Produces a collection containing cummulative results of applying the operator going right to left .
Produces a collection containing cummulative results of applying the operator going right to left .
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
collection with intermediate results
Computes length of longest segment whose elements all satisfy some predicate .
Computes length of longest segment whose elements all satisfy some predicate .
the predicate used to test elements .
the index where the search starts .
the length of the longest segment of this immutable stack starting from index from such that every element of the segment satisfies the predicate p.
The size of this immutable stack, equivalent to length.
The size of this immutable stack, equivalent to length.
the number of elements in this immutable stack .
Selects an interval of elements .
Selects an interval of elements .
Note: c.slice(from, to) is equivalent to (but possibly more efficient than)
c.drop(from).take(to - from)
the index of the first returned element in this immutable stack .
the index one past the last returned element in this immutable stack .
a immutable stack containing the elements starting at index from and extending up to (but not including) index until of this immutable stack.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped .
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped . )
the number of elements per group
An iterator producing immutable stacks of size size, except the
last will be truncated if the elements don't divide evenly.
Iterator#sliding
Sorts this immutable .
Sorts this immutable . Stack according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.
the target type of the transformation f, and the type where
the ordering ord is defined.
the transformation function mapping elements
to some other domain B.
the ordering assumed on domain B.
a immutable stack consisting of the elements of this immutable stack
sorted according to the ordering where x < y if
ord.lt(f(x), f(y)).
scala . math.Ordering
Sorts this immutable stack according to a comparison function .
Sorts this immutable stack according to a comparison function .
The sort is stable. That is, elements that are equal wrt lt appear in the
same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering .
a immutable stack consisting of the elements of this immutable stack
sorted according to the comparison function lt.
Sorts this immutable stack according to an Ordering .
Sorts this immutable stack according to an Ordering .
The sort is stable. That is, elements that are equal wrt lt appear in the
same order in the sorted sequence as in the original.
the ordering to be used to compare elements .
a immutable stack consisting of the elements of this immutable stack
sorted according to the ordering ord.
scala . math.Ordering
Splits this immutable stack into a prefix/suffix pair according to a predicate .
Splits this immutable stack into a prefix/suffix pair according to a predicate .
Note: c span p is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p), provided the evaluation of the predicate p does not cause any side-effects.
the test predicate
a pair consisting of the longest prefix of this immutable stack whose
elements all satisfy p, and the rest of this immutable stack.
Splits this immutable stack into two at a given position .
Splits this immutable stack into two at a given position.
Note: c splitAt n is equivalent to (but possibly more efficient than)
(c take n, c drop n).
the position at which to split .
a pair of immutable stacks consisting of the first n elements of this immutable stack, and the other elements.
Tests whether this immutable stack starts with the given sequence .
Tests whether this immutable stack starts with the given sequence .
the sequence to test
true if this collection has that as a prefix, false otherwise.
Tests whether this immutable stack contains the given sequence at a given index .
Tests whether this immutable stack contains the given sequence at a given index .
If the both the receiver object, this and the argument, that are infinite sequences this method may not terminate.
the sequence to test
the index where the sequence is searched .
true if the sequence that is contained in this immutable stack at index offset,
otherwise false.
Defines the prefix of this object's toString representation.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString applied to this immutable stack.
By default the string prefix is the simple name of the collection class immutable stack.
[use case] Sums up the elements of this collection .
Sums up the elements of this collection .
the sum of all elements in this immutable stack of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the immutable stack and as result type of sum.
Examples of such types are: Long, Float, Double, BigInt.
Sums up the elements of this collection .
Sums up the elements of this collection .
the result type of the + operator.
an implicit parameter defining a set of numeric operations
which includes the + operator to be used in forming the sum.
the sum of all elements of this immutable stack with respect to the + operator in num.
Selects all elements except the first .
Selects all elements except the first .
a immutable stack consisting of all elements of this immutable stack except the first one .
Selects first n elements.
Selects first n elements.
Tt number of elements to take from this immutable stack .
a immutable stack consisting only of the first n elements of this immutable stack, or else the
whole immutable stack, if it has less than n elements.
Selects last n elements.
Selects last n elements.
the number of elements to take
a immutable stack consisting only of the last n elements of this immutable stack, or else the
whole immutable stack, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate .
Takes longest prefix of elements that satisfy a predicate .
The predicate used to test elements .
the longest prefix of this immutable stack whose elements all satisfy
the predicate p.
The underlying collection seen as an instance of immutable.Stack.
The underlying collection seen as an instance of immutable.Stack.
By default this is implemented as the current collection object itself,
but this can be overridden.
[use case] Converts this immutable stack to an array .
Converts this immutable stack to an array .
an array containing all elements of this immutable stack.
A ClassManifest must be available for the element type of this immutable stack.
Converts this immutable stack to an array .
Converts this immutable stack to an array .
the type of the elements of the array. A ClassManifest for this type must
be available.
an array containing all elements of this immutable stack .
A conversion from collections of type Repr to immutable.Stack objects.
A conversion from collections of type Repr to immutable.Stack objects.
By default this is implemented as just a cast, but this can be overridden.
Converts this immutable stack to an indexed sequence .
Converts this immutable stack to an indexed sequence .
an indexed sequence containing all elements of this immutable stack .
Converts this immutable stack to an iterable collection .
Converts this immutable stack to an iterable collection .
an Iterable containing all elements of this immutable stack.
Returns an Iterator over the elements in this immutable stack .
Returns an Iterator over the elements in this immutable stack . Will return the same Iterator if this instance is already an Iterator.
an Iterator containing all elements of this immutable stack .
Converts this immutable stack to a list .
Converts this immutable stack to a list .
a list containing all elements of this immutable stack .
Converts this immutable stack to a map .
Converts this immutable stack to a map . This method is unavailable unless the elements are members of Tuple2, each ((K, V)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map containing all elements of this immutable stack .
Converts this immutable stack to a sequence .
Converts this immutable stack to a sequence .
Overridden for efficiency.@return a sequence containing all elements of this immutable stack.
Converts this immutable stack to a set .
Converts this immutable stack to a set .
a set containing all elements of this immutable stack .
Converts this immutable stack to a stream .
Converts this immutable stack to a stream .
a stream containing all elements of this immutable stack .
Returns a string representation of this stack .
Returns a string representation of this stack.@return a string representation of this collection. By default this
string consists of the stringPrefix of this immutable stack,
followed by all elements separated by commas and enclosed in parentheses.
Converts this immutable stack to an unspecified Traversable .
Converts this immutable stack to an unspecified Traversable . Will return the same collection if this instance is already Traversable.
a Traversable containing all elements of this immutable stack .
Returns the top element of the stack .
Returns the top element of the stack . An error is signaled if there is no element on the stack.
the top element .
Transposes this immutable stack of traversable collections into a immutable stack of immutable stacks .
Transposes this immutable stack of traversable collections into a immutable stack of immutable stacks .
the type of the elements of each traversable collection .
an implicit conversion which asserts that the element type of this
immutable stack is a Traversable.
a two-dimensional immutable stack of immutable stacks which has as nth row the nth column of this immutable stack.
[use case] Produces a new sequence which contains all elements of this immutable stack and also all elements of a given sequence .
Produces a new sequence which contains all elements of this immutable stack and also all elements of
a given sequence. xs union ys is equivalent to xs ++ ys.
the sequence to add .
a new immutable stack which contains all elements of this immutable stack
followed by all elements of that.
Produces a new sequence which contains all elements of this immutable stack and also all elements of a given sequence .
Produces a new sequence which contains all elements of this immutable stack and also all elements of
a given sequence. xs union ys is equivalent to xs ++ ys.
Another way to express this
is that xs union ys computes the order-presevring multi-set union of xs and ys.
union is hence a counter-part of diff and intersect which also work on multi-sets.
the element type of the returned immutable stack .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the sequence to add .
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That which contains all elements of this immutable stack
followed by all elements of that.
Converts this immutable stack of pairs into two collections of the first and second halfs of each pair .
Converts this immutable stack of pairs into two collections of the first and second halfs of each pair .
an implicit conversion which asserts that the element type of this immutable stack is a pair .
a pair immutable stacks, containing the first, respectively second half of each element pair of this immutable stack .
[use case] A copy of this immutable stack with one single replaced element .
A copy of this immutable stack with one single replaced element .
the position of the replacement
the replacing element
a copy of this immutable stack with the element at position index replaced by elem.
A copy of this immutable stack with one single replaced element .
A copy of this immutable stack with one single replaced element .
the element type of the returned immutable stack .
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the position of the replacement
the replacing element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new immutable stack which is a copy of this immutable stack with the element at position index replaced by elem.
Creates a non-strict view of a slice of this immutable stack .
Creates a non-strict view of a slice of this immutable stack .
Note: the difference between view and slice is that view produces
a view of the current immutable stack, whereas slice produces a new immutable stack.
Note: view(from, to) is equivalent to view.slice(from, to)
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this immutable stack, starting at index from and extending up to (but not including) index until.
Creates a non-strict view of this immutable stack .
Creates a non-strict view of this immutable stack .
a non-strict view of this immutable stack .
Creates a non-strict filter of this immutable stack .
Creates a non-strict filter of this immutable stack .
Note: the difference between c filter p and c withFilter p is that
the former creates a new collection, whereas the latter only restricts
the domain of subsequent map, flatMap, foreach, and withFilter operations.
the predicate used to test elements .
an object of class WithFilter, which supports
map, flatMap, foreach, and withFilter operations.
All these operations apply to those elements of this immutable stack which
satisfy the predicate p.
[use case] Returns a immutable stack formed from this immutable stack and another iterable collection by combining corresponding elements in pairs .
Returns a immutable stack formed from this immutable stack and another iterable collection by combining corresponding elements in pairs . If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new immutable stack containing pairs consisting of
corresponding elements of this immutable stack and that. The length
of the returned collection is the minimum of the lengths of this immutable stack and that.
Returns a immutable stack formed from this immutable stack and another iterable collection by combining corresponding elements in pairs .
Returns a immutable stack formed from this immutable stack and another iterable collection by combining corresponding elements in pairs . If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A).
the type of the second half of the returned pairs
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type (A1, B) being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, B), That].
is found.
The iterable providing the second half of each result pair
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type (A1, B).
a new collection of type That containing pairs consisting of
corresponding elements of this immutable stack and that. The length
of the returned collection is the minimum of the lengths of this immutable stack and that.
[use case] Returns a immutable stack formed from this immutable stack and another iterable collection by combining corresponding elements in pairs .
Returns a immutable stack formed from this immutable stack and another iterable collection by combining corresponding elements in pairs . If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this immutable stack is shorter than that.
the element to be used to fill up the result if that is shorter than this immutable stack.
a new immutable stack containing pairs consisting of
corresponding elements of this immutable stack and that. The length
of the returned collection is the maximum of the lengths of this immutable stack and that.
If this immutable stack is shorter than that, thisElem values are used to pad the result.
If that is shorter than this immutable stack, thatElem values are used to pad the result.
Returns a immutable stack formed from this immutable stack and another iterable collection by combining corresponding elements in pairs .
Returns a immutable stack formed from this immutable stack and another iterable collection by combining corresponding elements in pairs . If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this immutable stack is shorter than that.
the element to be used to fill up the result if that is shorter than this immutable stack.
a new collection of type That containing pairs consisting of
corresponding elements of this immutable stack and that. The length
of the returned collection is the maximum of the lengths of this immutable stack and that.
If this immutable stack is shorter than that, thisElem values are used to pad the result.
If that is shorter than this immutable stack, thatElem values are used to pad the result.
[use case] Zips this immutable stack with its indices .
Zips this immutable stack with its indices .
A new immutable stack containing pairs consisting of all elements of this
immutable stack paired with their index. Indices start at 0.
@example
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Zips this immutable stack with its indices .
Zips this immutable stack with its indices .
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A).
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type (A1, Int) being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, Int), That].
is found.
A new collection of type That containing pairs consisting of all elements of this
immutable stack paired with their index. Indices start at 0.
This class implements immutable stacks using a list-based data structure .
Note: This class exists only for historical reason and as an analogue of mutable stacks. Instead of an immutable stack you can just use a list.
the type of the elements contained in this stack .
version
1 . 0, 10/07/2003
since
1
authors:
Matthias Zenger