DynamoDbClient (AWS Java SDK :: Services :: Amazon DynamoDB 2.20.7 API)

All Superinterfaces:

AutoCloseable, SdkAutoCloseable, SdkClient
```
@Generated(value="software.amazon.awssdk:codegen")
 @ThreadSafe
public interface DynamoDbClient
extends SdkClient
```
Service client for accessing DynamoDB. This can be created using the static builder() method. Amazon DynamoDB
Amazon DynamoDB is a fully managed NoSQL database service that provides fast and predictable performance with seamless scalability. DynamoDB lets you offload the administrative burdens of operating and scaling a distributed database, so that you don't have to worry about hardware provisioning, setup and configuration, replication, software patching, or cluster scaling.

With DynamoDB, you can create database tables that can store and retrieve any amount of data, and serve any level of request traffic. You can scale up or scale down your tables' throughput capacity without downtime or performance degradation, and use the Amazon Web Services Management Console to monitor resource utilization and performance metrics.

DynamoDB automatically spreads the data and traffic for your tables over a sufficient number of servers to handle your throughput and storage requirements, while maintaining consistent and fast performance. All of your data is stored on solid state disks (SSDs) and automatically replicated across multiple Availability Zones in an Amazon Web Services Region, providing built-in high availability and data durability.

Field Summary

Fields
Modifier and Type Field and Description

static String SERVICE_METADATA_ID
Value for looking up the service's metadata from the ServiceMetadataProvider.

static String SERVICE_NAME

Fields
Modifier and Type	Field and Description
`static String`	`SERVICE_METADATA_ID` Value for looking up the service's metadata from the `ServiceMetadataProvider`.
`static String`	`SERVICE_NAME`

Method Summary

All Methods Static Methods Instance Methods Default Methods
Modifier and Type	Method and Description
`default BatchExecuteStatementResponse`	`batchExecuteStatement(BatchExecuteStatementRequest batchExecuteStatementRequest)` This operation allows you to perform batch reads or writes on data stored in DynamoDB, using PartiQL.
`default BatchExecuteStatementResponse`	`batchExecuteStatement(Consumer<BatchExecuteStatementRequest.Builder> batchExecuteStatementRequest)` This operation allows you to perform batch reads or writes on data stored in DynamoDB, using PartiQL.
`default BatchGetItemResponse`	`batchGetItem(BatchGetItemRequest batchGetItemRequest)` The `BatchGetItem` operation returns the attributes of one or more items from one or more tables.
`default BatchGetItemResponse`	`batchGetItem(Consumer<BatchGetItemRequest.Builder> batchGetItemRequest)` The `BatchGetItem` operation returns the attributes of one or more items from one or more tables.
`default BatchGetItemIterable`	`batchGetItemPaginator(BatchGetItemRequest batchGetItemRequest)` The `BatchGetItem` operation returns the attributes of one or more items from one or more tables.
`default BatchGetItemIterable`	`batchGetItemPaginator(Consumer<BatchGetItemRequest.Builder> batchGetItemRequest)` The `BatchGetItem` operation returns the attributes of one or more items from one or more tables.
`default BatchWriteItemResponse`	`batchWriteItem(BatchWriteItemRequest batchWriteItemRequest)` The `BatchWriteItem` operation puts or deletes multiple items in one or more tables.
`default BatchWriteItemResponse`	`batchWriteItem(Consumer<BatchWriteItemRequest.Builder> batchWriteItemRequest)` The `BatchWriteItem` operation puts or deletes multiple items in one or more tables.
`static DynamoDbClientBuilder`	`builder()` Create a builder that can be used to configure and create a `DynamoDbClient`.
`static DynamoDbClient`	`create()` Create a `DynamoDbClient` with the region loaded from the `DefaultAwsRegionProviderChain` and credentials loaded from the `DefaultCredentialsProvider`.
`default CreateBackupResponse`	`createBackup(Consumer<CreateBackupRequest.Builder> createBackupRequest)` Creates a backup for an existing table.
`default CreateBackupResponse`	`createBackup(CreateBackupRequest createBackupRequest)` Creates a backup for an existing table.
`default CreateGlobalTableResponse`	`createGlobalTable(Consumer<CreateGlobalTableRequest.Builder> createGlobalTableRequest)` Creates a global table from an existing table.
`default CreateGlobalTableResponse`	`createGlobalTable(CreateGlobalTableRequest createGlobalTableRequest)` Creates a global table from an existing table.
`default CreateTableResponse`	`createTable(Consumer<CreateTableRequest.Builder> createTableRequest)` The `CreateTable` operation adds a new table to your account.
`default CreateTableResponse`	`createTable(CreateTableRequest createTableRequest)` The `CreateTable` operation adds a new table to your account.
`default DeleteBackupResponse`	`deleteBackup(Consumer<DeleteBackupRequest.Builder> deleteBackupRequest)` Deletes an existing backup of a table.
`default DeleteBackupResponse`	`deleteBackup(DeleteBackupRequest deleteBackupRequest)` Deletes an existing backup of a table.
`default DeleteItemResponse`	`deleteItem(Consumer<DeleteItemRequest.Builder> deleteItemRequest)` Deletes a single item in a table by primary key.
`default DeleteItemResponse`	`deleteItem(DeleteItemRequest deleteItemRequest)` Deletes a single item in a table by primary key.
`default DeleteTableResponse`	`deleteTable(Consumer<DeleteTableRequest.Builder> deleteTableRequest)` The `DeleteTable` operation deletes a table and all of its items.
`default DeleteTableResponse`	`deleteTable(DeleteTableRequest deleteTableRequest)` The `DeleteTable` operation deletes a table and all of its items.
`default DescribeBackupResponse`	`describeBackup(Consumer<DescribeBackupRequest.Builder> describeBackupRequest)` Describes an existing backup of a table.
`default DescribeBackupResponse`	`describeBackup(DescribeBackupRequest describeBackupRequest)` Describes an existing backup of a table.
`default DescribeContinuousBackupsResponse`	`describeContinuousBackups(Consumer<DescribeContinuousBackupsRequest.Builder> describeContinuousBackupsRequest)` Checks the status of continuous backups and point in time recovery on the specified table.
`default DescribeContinuousBackupsResponse`	`describeContinuousBackups(DescribeContinuousBackupsRequest describeContinuousBackupsRequest)` Checks the status of continuous backups and point in time recovery on the specified table.
`default DescribeContributorInsightsResponse`	`describeContributorInsights(Consumer<DescribeContributorInsightsRequest.Builder> describeContributorInsightsRequest)` Returns information about contributor insights, for a given table or global secondary index.
`default DescribeContributorInsightsResponse`	`describeContributorInsights(DescribeContributorInsightsRequest describeContributorInsightsRequest)` Returns information about contributor insights, for a given table or global secondary index.
`default DescribeEndpointsResponse`	`describeEndpoints()` Returns the regional endpoint information.
`default DescribeEndpointsResponse`	`describeEndpoints(Consumer<DescribeEndpointsRequest.Builder> describeEndpointsRequest)` Returns the regional endpoint information.
`default DescribeEndpointsResponse`	`describeEndpoints(DescribeEndpointsRequest describeEndpointsRequest)` Returns the regional endpoint information.
`default DescribeExportResponse`	`describeExport(Consumer<DescribeExportRequest.Builder> describeExportRequest)` Describes an existing table export.
`default DescribeExportResponse`	`describeExport(DescribeExportRequest describeExportRequest)` Describes an existing table export.
`default DescribeGlobalTableResponse`	`describeGlobalTable(Consumer<DescribeGlobalTableRequest.Builder> describeGlobalTableRequest)` Returns information about the specified global table.
`default DescribeGlobalTableResponse`	`describeGlobalTable(DescribeGlobalTableRequest describeGlobalTableRequest)` Returns information about the specified global table.
`default DescribeGlobalTableSettingsResponse`	`describeGlobalTableSettings(Consumer<DescribeGlobalTableSettingsRequest.Builder> describeGlobalTableSettingsRequest)` Describes Region-specific settings for a global table.
`default DescribeGlobalTableSettingsResponse`	`describeGlobalTableSettings(DescribeGlobalTableSettingsRequest describeGlobalTableSettingsRequest)` Describes Region-specific settings for a global table.
`default DescribeImportResponse`	`describeImport(Consumer<DescribeImportRequest.Builder> describeImportRequest)` Represents the properties of the import.
`default DescribeImportResponse`	`describeImport(DescribeImportRequest describeImportRequest)` Represents the properties of the import.
`default DescribeKinesisStreamingDestinationResponse`	`describeKinesisStreamingDestination(Consumer<DescribeKinesisStreamingDestinationRequest.Builder> describeKinesisStreamingDestinationRequest)` Returns information about the status of Kinesis streaming.
`default DescribeKinesisStreamingDestinationResponse`	`describeKinesisStreamingDestination(DescribeKinesisStreamingDestinationRequest describeKinesisStreamingDestinationRequest)` Returns information about the status of Kinesis streaming.
`default DescribeLimitsResponse`	`describeLimits()` Returns the current provisioned-capacity quotas for your Amazon Web Services account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
`default DescribeLimitsResponse`	`describeLimits(Consumer<DescribeLimitsRequest.Builder> describeLimitsRequest)` Returns the current provisioned-capacity quotas for your Amazon Web Services account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
`default DescribeLimitsResponse`	`describeLimits(DescribeLimitsRequest describeLimitsRequest)` Returns the current provisioned-capacity quotas for your Amazon Web Services account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
`default DescribeTableResponse`	`describeTable(Consumer<DescribeTableRequest.Builder> describeTableRequest)` Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
`default DescribeTableResponse`	`describeTable(DescribeTableRequest describeTableRequest)` Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
`default DescribeTableReplicaAutoScalingResponse`	`describeTableReplicaAutoScaling(Consumer<DescribeTableReplicaAutoScalingRequest.Builder> describeTableReplicaAutoScalingRequest)` Describes auto scaling settings across replicas of the global table at once.
`default DescribeTableReplicaAutoScalingResponse`	`describeTableReplicaAutoScaling(DescribeTableReplicaAutoScalingRequest describeTableReplicaAutoScalingRequest)` Describes auto scaling settings across replicas of the global table at once.
`default DescribeTimeToLiveResponse`	`describeTimeToLive(Consumer<DescribeTimeToLiveRequest.Builder> describeTimeToLiveRequest)` Gives a description of the Time to Live (TTL) status on the specified table.
`default DescribeTimeToLiveResponse`	`describeTimeToLive(DescribeTimeToLiveRequest describeTimeToLiveRequest)` Gives a description of the Time to Live (TTL) status on the specified table.
`default DisableKinesisStreamingDestinationResponse`	`disableKinesisStreamingDestination(Consumer<DisableKinesisStreamingDestinationRequest.Builder> disableKinesisStreamingDestinationRequest)` Stops replication from the DynamoDB table to the Kinesis data stream.
`default DisableKinesisStreamingDestinationResponse`	`disableKinesisStreamingDestination(DisableKinesisStreamingDestinationRequest disableKinesisStreamingDestinationRequest)` Stops replication from the DynamoDB table to the Kinesis data stream.
`default EnableKinesisStreamingDestinationResponse`	`enableKinesisStreamingDestination(Consumer<EnableKinesisStreamingDestinationRequest.Builder> enableKinesisStreamingDestinationRequest)` Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow.
`default EnableKinesisStreamingDestinationResponse`	`enableKinesisStreamingDestination(EnableKinesisStreamingDestinationRequest enableKinesisStreamingDestinationRequest)` Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow.
`default ExecuteStatementResponse`	`executeStatement(Consumer<ExecuteStatementRequest.Builder> executeStatementRequest)` This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
`default ExecuteStatementResponse`	`executeStatement(ExecuteStatementRequest executeStatementRequest)` This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
`default ExecuteTransactionResponse`	`executeTransaction(Consumer<ExecuteTransactionRequest.Builder> executeTransactionRequest)` This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
`default ExecuteTransactionResponse`	`executeTransaction(ExecuteTransactionRequest executeTransactionRequest)` This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
`default ExportTableToPointInTimeResponse`	`exportTableToPointInTime(Consumer<ExportTableToPointInTimeRequest.Builder> exportTableToPointInTimeRequest)` Exports table data to an S3 bucket.
`default ExportTableToPointInTimeResponse`	`exportTableToPointInTime(ExportTableToPointInTimeRequest exportTableToPointInTimeRequest)` Exports table data to an S3 bucket.
`default GetItemResponse`	`getItem(Consumer<GetItemRequest.Builder> getItemRequest)` The `GetItem` operation returns a set of attributes for the item with the given primary key.
`default GetItemResponse`	`getItem(GetItemRequest getItemRequest)` The `GetItem` operation returns a set of attributes for the item with the given primary key.
`default ImportTableResponse`	`importTable(Consumer<ImportTableRequest.Builder> importTableRequest)` Imports table data from an S3 bucket.
`default ImportTableResponse`	`importTable(ImportTableRequest importTableRequest)` Imports table data from an S3 bucket.
`default ListBackupsResponse`	`listBackups()` List backups associated with an Amazon Web Services account.
`default ListBackupsResponse`	`listBackups(Consumer<ListBackupsRequest.Builder> listBackupsRequest)` List backups associated with an Amazon Web Services account.
`default ListBackupsResponse`	`listBackups(ListBackupsRequest listBackupsRequest)` List backups associated with an Amazon Web Services account.
`default ListContributorInsightsResponse`	`listContributorInsights(Consumer<ListContributorInsightsRequest.Builder> listContributorInsightsRequest)` Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
`default ListContributorInsightsResponse`	`listContributorInsights(ListContributorInsightsRequest listContributorInsightsRequest)` Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
`default ListContributorInsightsIterable`	`listContributorInsightsPaginator(Consumer<ListContributorInsightsRequest.Builder> listContributorInsightsRequest)` Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
`default ListContributorInsightsIterable`	`listContributorInsightsPaginator(ListContributorInsightsRequest listContributorInsightsRequest)` Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
`default ListExportsResponse`	`listExports(Consumer<ListExportsRequest.Builder> listExportsRequest)` Lists completed exports within the past 90 days.
`default ListExportsResponse`	`listExports(ListExportsRequest listExportsRequest)` Lists completed exports within the past 90 days.
`default ListExportsIterable`	`listExportsPaginator(Consumer<ListExportsRequest.Builder> listExportsRequest)` Lists completed exports within the past 90 days.
`default ListExportsIterable`	`listExportsPaginator(ListExportsRequest listExportsRequest)` Lists completed exports within the past 90 days.
`default ListGlobalTablesResponse`	`listGlobalTables()` Lists all global tables that have a replica in the specified Region.
`default ListGlobalTablesResponse`	`listGlobalTables(Consumer<ListGlobalTablesRequest.Builder> listGlobalTablesRequest)` Lists all global tables that have a replica in the specified Region.
`default ListGlobalTablesResponse`	`listGlobalTables(ListGlobalTablesRequest listGlobalTablesRequest)` Lists all global tables that have a replica in the specified Region.
`default ListImportsResponse`	`listImports(Consumer<ListImportsRequest.Builder> listImportsRequest)` Lists completed imports within the past 90 days.
`default ListImportsResponse`	`listImports(ListImportsRequest listImportsRequest)` Lists completed imports within the past 90 days.
`default ListImportsIterable`	`listImportsPaginator(Consumer<ListImportsRequest.Builder> listImportsRequest)` Lists completed imports within the past 90 days.
`default ListImportsIterable`	`listImportsPaginator(ListImportsRequest listImportsRequest)` Lists completed imports within the past 90 days.
`default ListTablesResponse`	`listTables()` Returns an array of table names associated with the current account and endpoint.
`default ListTablesResponse`	`listTables(Consumer<ListTablesRequest.Builder> listTablesRequest)` Returns an array of table names associated with the current account and endpoint.
`default ListTablesResponse`	`listTables(ListTablesRequest listTablesRequest)` Returns an array of table names associated with the current account and endpoint.
`default ListTablesIterable`	`listTablesPaginator()` Returns an array of table names associated with the current account and endpoint.
`default ListTablesIterable`	`listTablesPaginator(Consumer<ListTablesRequest.Builder> listTablesRequest)` Returns an array of table names associated with the current account and endpoint.
`default ListTablesIterable`	`listTablesPaginator(ListTablesRequest listTablesRequest)` Returns an array of table names associated with the current account and endpoint.
`default ListTagsOfResourceResponse`	`listTagsOfResource(Consumer<ListTagsOfResourceRequest.Builder> listTagsOfResourceRequest)` List all tags on an Amazon DynamoDB resource.
`default ListTagsOfResourceResponse`	`listTagsOfResource(ListTagsOfResourceRequest listTagsOfResourceRequest)` List all tags on an Amazon DynamoDB resource.
`default PutItemResponse`	`putItem(Consumer<PutItemRequest.Builder> putItemRequest)` Creates a new item, or replaces an old item with a new item.
`default PutItemResponse`	`putItem(PutItemRequest putItemRequest)` Creates a new item, or replaces an old item with a new item.
`default QueryResponse`	`query(Consumer<QueryRequest.Builder> queryRequest)` You must provide the name of the partition key attribute and a single value for that attribute.
`default QueryResponse`	`query(QueryRequest queryRequest)` You must provide the name of the partition key attribute and a single value for that attribute.
`default QueryIterable`	`queryPaginator(Consumer<QueryRequest.Builder> queryRequest)` You must provide the name of the partition key attribute and a single value for that attribute.
`default QueryIterable`	`queryPaginator(QueryRequest queryRequest)` You must provide the name of the partition key attribute and a single value for that attribute.
`default RestoreTableFromBackupResponse`	`restoreTableFromBackup(Consumer<RestoreTableFromBackupRequest.Builder> restoreTableFromBackupRequest)` Creates a new table from an existing backup.
`default RestoreTableFromBackupResponse`	`restoreTableFromBackup(RestoreTableFromBackupRequest restoreTableFromBackupRequest)` Creates a new table from an existing backup.
`default RestoreTableToPointInTimeResponse`	`restoreTableToPointInTime(Consumer<RestoreTableToPointInTimeRequest.Builder> restoreTableToPointInTimeRequest)` Restores the specified table to the specified point in time within `EarliestRestorableDateTime` and `LatestRestorableDateTime`.
`default RestoreTableToPointInTimeResponse`	`restoreTableToPointInTime(RestoreTableToPointInTimeRequest restoreTableToPointInTimeRequest)` Restores the specified table to the specified point in time within `EarliestRestorableDateTime` and `LatestRestorableDateTime`.
`default ScanResponse`	`scan(Consumer<ScanRequest.Builder> scanRequest)` The `Scan` operation returns one or more items and item attributes by accessing every item in a table or a secondary index.
`default ScanResponse`	`scan(ScanRequest scanRequest)` The `Scan` operation returns one or more items and item attributes by accessing every item in a table or a secondary index.
`default ScanIterable`	`scanPaginator(Consumer<ScanRequest.Builder> scanRequest)` The `Scan` operation returns one or more items and item attributes by accessing every item in a table or a secondary index.
`default ScanIterable`	`scanPaginator(ScanRequest scanRequest)` The `Scan` operation returns one or more items and item attributes by accessing every item in a table or a secondary index.
`static ServiceMetadata`	`serviceMetadata()`
`default TagResourceResponse`	`tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)` Associate a set of tags with an Amazon DynamoDB resource.
`default TagResourceResponse`	`tagResource(TagResourceRequest tagResourceRequest)` Associate a set of tags with an Amazon DynamoDB resource.
`default TransactGetItemsResponse`	`transactGetItems(Consumer<TransactGetItemsRequest.Builder> transactGetItemsRequest)` `TransactGetItems` is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region.
`default TransactGetItemsResponse`	`transactGetItems(TransactGetItemsRequest transactGetItemsRequest)` `TransactGetItems` is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region.
`default TransactWriteItemsResponse`	`transactWriteItems(Consumer<TransactWriteItemsRequest.Builder> transactWriteItemsRequest)` `TransactWriteItems` is a synchronous write operation that groups up to 100 action requests.
`default TransactWriteItemsResponse`	`transactWriteItems(TransactWriteItemsRequest transactWriteItemsRequest)` `TransactWriteItems` is a synchronous write operation that groups up to 100 action requests.
`default UntagResourceResponse`	`untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)` Removes the association of tags from an Amazon DynamoDB resource.
`default UntagResourceResponse`	`untagResource(UntagResourceRequest untagResourceRequest)` Removes the association of tags from an Amazon DynamoDB resource.
`default UpdateContinuousBackupsResponse`	`updateContinuousBackups(Consumer<UpdateContinuousBackupsRequest.Builder> updateContinuousBackupsRequest)` `UpdateContinuousBackups` enables or disables point in time recovery for the specified table.
`default UpdateContinuousBackupsResponse`	`updateContinuousBackups(UpdateContinuousBackupsRequest updateContinuousBackupsRequest)` `UpdateContinuousBackups` enables or disables point in time recovery for the specified table.
`default UpdateContributorInsightsResponse`	`updateContributorInsights(Consumer<UpdateContributorInsightsRequest.Builder> updateContributorInsightsRequest)` Updates the status for contributor insights for a specific table or index.
`default UpdateContributorInsightsResponse`	`updateContributorInsights(UpdateContributorInsightsRequest updateContributorInsightsRequest)` Updates the status for contributor insights for a specific table or index.
`default UpdateGlobalTableResponse`	`updateGlobalTable(Consumer<UpdateGlobalTableRequest.Builder> updateGlobalTableRequest)` Adds or removes replicas in the specified global table.
`default UpdateGlobalTableResponse`	`updateGlobalTable(UpdateGlobalTableRequest updateGlobalTableRequest)` Adds or removes replicas in the specified global table.
`default UpdateGlobalTableSettingsResponse`	`updateGlobalTableSettings(Consumer<UpdateGlobalTableSettingsRequest.Builder> updateGlobalTableSettingsRequest)` Updates settings for a global table.
`default UpdateGlobalTableSettingsResponse`	`updateGlobalTableSettings(UpdateGlobalTableSettingsRequest updateGlobalTableSettingsRequest)` Updates settings for a global table.
`default UpdateItemResponse`	`updateItem(Consumer<UpdateItemRequest.Builder> updateItemRequest)` Edits an existing item's attributes, or adds a new item to the table if it does not already exist.
`default UpdateItemResponse`	`updateItem(UpdateItemRequest updateItemRequest)` Edits an existing item's attributes, or adds a new item to the table if it does not already exist.
`default UpdateTableResponse`	`updateTable(Consumer<UpdateTableRequest.Builder> updateTableRequest)` Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
`default UpdateTableResponse`	`updateTable(UpdateTableRequest updateTableRequest)` Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
`default UpdateTableReplicaAutoScalingResponse`	`updateTableReplicaAutoScaling(Consumer<UpdateTableReplicaAutoScalingRequest.Builder> updateTableReplicaAutoScalingRequest)` Updates auto scaling settings on your global tables at once.
`default UpdateTableReplicaAutoScalingResponse`	`updateTableReplicaAutoScaling(UpdateTableReplicaAutoScalingRequest updateTableReplicaAutoScalingRequest)` Updates auto scaling settings on your global tables at once.
`default UpdateTimeToLiveResponse`	`updateTimeToLive(Consumer<UpdateTimeToLiveRequest.Builder> updateTimeToLiveRequest)` The `UpdateTimeToLive` method enables or disables Time to Live (TTL) for the specified table.
`default UpdateTimeToLiveResponse`	`updateTimeToLive(UpdateTimeToLiveRequest updateTimeToLiveRequest)` The `UpdateTimeToLive` method enables or disables Time to Live (TTL) for the specified table.
`default DynamoDbWaiter`	`waiter()` Create an instance of `DynamoDbWaiter` using this client.

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

- Field Detail
  - SERVICE_NAME
```
static final String SERVICE_NAME
```
    See Also:
    
    Constant Field Values
  - SERVICE_METADATA_ID
```
static final String SERVICE_METADATA_ID
```
    Value for looking up the service's metadata from the ServiceMetadataProvider.
    
    See Also:
    
    Constant Field Values
- Method Detail
  - batchExecuteStatement
```
default BatchExecuteStatementResponse batchExecuteStatement(BatchExecuteStatementRequest batchExecuteStatementRequest)
                                                     throws RequestLimitExceededException,
                                                            InternalServerErrorException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            DynamoDbException
```
    This operation allows you to perform batch reads or writes on data stored in DynamoDB, using PartiQL. Each read statement in a BatchExecuteStatement must specify an equality condition on all key attributes. This enforces that each SELECT statement in a batch returns at most a single item.
    
    The entire batch must consist of either read statements or write statements, you cannot mix both in one batch.
    
    A HTTP 200 response does not mean that all statements in the BatchExecuteStatement succeeded. Error details for individual statements can be found under the Error field of the BatchStatementResponse for each statement.
    
    Parameters:
    
    batchExecuteStatementRequest -
    
    Returns:
    
    Result of the BatchExecuteStatement operation returned by the service.
    
    Throws:
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchExecuteStatement
```
default BatchExecuteStatementResponse batchExecuteStatement(Consumer<BatchExecuteStatementRequest.Builder> batchExecuteStatementRequest)
                                                     throws RequestLimitExceededException,
                                                            InternalServerErrorException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            DynamoDbException
```
    This operation allows you to perform batch reads or writes on data stored in DynamoDB, using PartiQL. Each read statement in a BatchExecuteStatement must specify an equality condition on all key attributes. This enforces that each SELECT statement in a batch returns at most a single item.
    
    The entire batch must consist of either read statements or write statements, you cannot mix both in one batch.
    
    A HTTP 200 response does not mean that all statements in the BatchExecuteStatement succeeded. Error details for individual statements can be found under the Error field of the BatchStatementResponse for each statement.
    
    This is a convenience which creates an instance of the BatchExecuteStatementRequest.Builder avoiding the need to create one manually via BatchExecuteStatementRequest.builder()
    
    Parameters:
    
    batchExecuteStatementRequest - A Consumer that will call methods on BatchExecuteStatementInput.Builder to create a request.
    
    Returns:
    
    Result of the BatchExecuteStatement operation returned by the service.
    
    Throws:
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetItem
```
default BatchGetItemResponse batchGetItem(BatchGetItemRequest batchGetItemRequest)
                                   throws ProvisionedThroughputExceededException,
                                          ResourceNotFoundException,
                                          RequestLimitExceededException,
                                          InternalServerErrorException,
                                          AwsServiceException,
                                          SdkClientException,
                                          DynamoDbException
```
    The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.
    
    A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items. BatchGetItem returns a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys. You can use this value to retry the operation starting with the next item to get.
    
    If you request more than 100 items, BatchGetItem returns a ValidationException with the message "Too many items requested for the BatchGetItem call."
    
    For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52 items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem returns a ProvisionedThroughputExceededException. If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    By default, BatchGetItem performs eventually consistent reads on every table in the request. If you want strongly consistent reads instead, you can set ConsistentRead to true for any or all tables.
    
    In order to minimize response latency, BatchGetItem retrieves items in parallel.
    
    When designing your application, keep in mind that DynamoDB does not return items in any particular order. To help parse the response by item, include the primary key values for the items in your request in the ProjectionExpression parameter.
    
    If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Working with Tables in the Amazon DynamoDB Developer Guide.
    
    Parameters:
    
    batchGetItemRequest - Represents the input of a BatchGetItem operation.
    
    Returns:
    
    Result of the BatchGetItem operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetItem
```
default BatchGetItemResponse batchGetItem(Consumer<BatchGetItemRequest.Builder> batchGetItemRequest)
                                   throws ProvisionedThroughputExceededException,
                                          ResourceNotFoundException,
                                          RequestLimitExceededException,
                                          InternalServerErrorException,
                                          AwsServiceException,
                                          SdkClientException,
                                          DynamoDbException
```
    The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.
    
    A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items. BatchGetItem returns a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys. You can use this value to retry the operation starting with the next item to get.
    
    If you request more than 100 items, BatchGetItem returns a ValidationException with the message "Too many items requested for the BatchGetItem call."
    
    For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52 items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem returns a ProvisionedThroughputExceededException. If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    By default, BatchGetItem performs eventually consistent reads on every table in the request. If you want strongly consistent reads instead, you can set ConsistentRead to true for any or all tables.
    
    In order to minimize response latency, BatchGetItem retrieves items in parallel.
    
    When designing your application, keep in mind that DynamoDB does not return items in any particular order. To help parse the response by item, include the primary key values for the items in your request in the ProjectionExpression parameter.
    
    If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Working with Tables in the Amazon DynamoDB Developer Guide.
    
    This is a convenience which creates an instance of the BatchGetItemRequest.Builder avoiding the need to create one manually via BatchGetItemRequest.builder()
    
    Parameters:
    
    batchGetItemRequest - A Consumer that will call methods on BatchGetItemInput.Builder to create a request. Represents the input of a BatchGetItem operation.
    
    Returns:
    
    Result of the BatchGetItem operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetItemPaginator
```
default BatchGetItemIterable batchGetItemPaginator(BatchGetItemRequest batchGetItemRequest)
                                            throws ProvisionedThroughputExceededException,
                                                   ResourceNotFoundException,
                                                   RequestLimitExceededException,
                                                   InternalServerErrorException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   DynamoDbException
```
    The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.
    
    A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items. BatchGetItem returns a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys. You can use this value to retry the operation starting with the next item to get.
    
    If you request more than 100 items, BatchGetItem returns a ValidationException with the message "Too many items requested for the BatchGetItem call."
    
    For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52 items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem returns a ProvisionedThroughputExceededException. If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    By default, BatchGetItem performs eventually consistent reads on every table in the request. If you want strongly consistent reads instead, you can set ConsistentRead to true for any or all tables.
    
    In order to minimize response latency, BatchGetItem retrieves items in parallel.
    
    When designing your application, keep in mind that DynamoDB does not return items in any particular order. To help parse the response by item, include the primary key values for the items in your request in the ProjectionExpression parameter.
    
    If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Working with Tables in the Amazon DynamoDB Developer Guide.
    
    This is a variant of batchGetItem(software.amazon.awssdk.services.dynamodb.model.BatchGetItemRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.BatchGetItemIterable responses = client.batchGetItemPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.BatchGetItemIterable responses = client.batchGetItemPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.BatchGetItemResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.BatchGetItemIterable responses = client.batchGetItemPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of null won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the batchGetItem(software.amazon.awssdk.services.dynamodb.model.BatchGetItemRequest) operation.
    Parameters:
    
    batchGetItemRequest - Represents the input of a BatchGetItem operation.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetItemPaginator
```
default BatchGetItemIterable batchGetItemPaginator(Consumer<BatchGetItemRequest.Builder> batchGetItemRequest)
                                            throws ProvisionedThroughputExceededException,
                                                   ResourceNotFoundException,
                                                   RequestLimitExceededException,
                                                   InternalServerErrorException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   DynamoDbException
```
    The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.
    
    A single operation can retrieve up to 16 MB of data, which can contain as many as 100 items. BatchGetItem returns a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys. You can use this value to retry the operation starting with the next item to get.
    
    If you request more than 100 items, BatchGetItem returns a ValidationException with the message "Too many items requested for the BatchGetItem call."
    
    For example, if you ask to retrieve 100 items, but each individual item is 300 KB in size, the system returns 52 items (so as not to exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem returns a ProvisionedThroughputExceededException. If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    By default, BatchGetItem performs eventually consistent reads on every table in the request. If you want strongly consistent reads instead, you can set ConsistentRead to true for any or all tables.
    
    In order to minimize response latency, BatchGetItem retrieves items in parallel.
    
    When designing your application, keep in mind that DynamoDB does not return items in any particular order. To help parse the response by item, include the primary key values for the items in your request in the ProjectionExpression parameter.
    
    If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Working with Tables in the Amazon DynamoDB Developer Guide.
    
    This is a variant of batchGetItem(software.amazon.awssdk.services.dynamodb.model.BatchGetItemRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.BatchGetItemIterable responses = client.batchGetItemPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.BatchGetItemIterable responses = client.batchGetItemPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.BatchGetItemResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.BatchGetItemIterable responses = client.batchGetItemPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of null won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the batchGetItem(software.amazon.awssdk.services.dynamodb.model.BatchGetItemRequest) operation.
    
    This is a convenience which creates an instance of the BatchGetItemRequest.Builder avoiding the need to create one manually via BatchGetItemRequest.builder()
    Parameters:
    
    batchGetItemRequest - A Consumer that will call methods on BatchGetItemInput.Builder to create a request. Represents the input of a BatchGetItem operation.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchWriteItem
```
default BatchWriteItemResponse batchWriteItem(BatchWriteItemRequest batchWriteItemRequest)
                                       throws ProvisionedThroughputExceededException,
                                              ResourceNotFoundException,
                                              ItemCollectionSizeLimitExceededException,
                                              RequestLimitExceededException,
                                              InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to BatchWriteItem can transmit up to 16MB of data over the network, consisting of up to 25 item put or delete operations. While individual items can be up to 400 KB once stored, it's important to note that an item's representation might be greater than 400KB while being sent in DynamoDB's JSON format for the API call. For more details on this distinction, see Naming Rules and Data Types.
    
    BatchWriteItem cannot update items. If you perform a BatchWriteItem operation on an existing item, that item's values will be overwritten by the operation and it will appear like it was updated. To update items, we recommend you use the UpdateItem action.
    
    The individual PutItem and DeleteItem operations specified in BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs, the failed operations are returned in the UnprocessedItems response parameter. You can investigate and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each iteration would check for unprocessed items and submit a new BatchWriteItem request with those unprocessed items until all items have been processed.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchWriteItem returns a ProvisionedThroughputExceededException.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    With BatchWriteItem, you can efficiently write or delete large amounts of data, such as from Amazon EMR, or copy data from another database into DynamoDB. In order to improve performance with these large-scale operations, BatchWriteItem does not behave in the same way as individual PutItem and DeleteItem calls would. For example, you cannot specify conditions on individual put and delete requests, and BatchWriteItem does not return deleted items in the response.
    
    If you use a programming language that supports concurrency, you can use threads to write items in parallel. Your application must include the necessary logic to manage the threads. With languages that don't support threading, you must update or delete the specified items one at a time. In both situations, BatchWriteItem performs the specified put and delete operations in parallel, giving you the power of the thread pool approach without having to introduce complexity into your application.
    
    Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.
    
    If one or more of the following is true, DynamoDB rejects the entire batch write operation:
    - One or more tables specified in the BatchWriteItem request does not exist.
    - Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.
    - You try to perform multiple operations on the same item in the same BatchWriteItem request. For example, you cannot put and delete the same item in the same BatchWriteItem request.
    - Your request contains at least two items with identical hash and range keys (which essentially is two put operations).
    - There are more than 25 requests in the batch.
    - Any individual item in a batch exceeds 400 KB.
    - The total request size exceeds 16 MB.
    Parameters:
    
    batchWriteItemRequest - Represents the input of a BatchWriteItem operation.
    
    Returns:
    
    Result of the BatchWriteItem operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchWriteItem
```
default BatchWriteItemResponse batchWriteItem(Consumer<BatchWriteItemRequest.Builder> batchWriteItemRequest)
                                       throws ProvisionedThroughputExceededException,
                                              ResourceNotFoundException,
                                              ItemCollectionSizeLimitExceededException,
                                              RequestLimitExceededException,
                                              InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to BatchWriteItem can transmit up to 16MB of data over the network, consisting of up to 25 item put or delete operations. While individual items can be up to 400 KB once stored, it's important to note that an item's representation might be greater than 400KB while being sent in DynamoDB's JSON format for the API call. For more details on this distinction, see Naming Rules and Data Types.
    
    BatchWriteItem cannot update items. If you perform a BatchWriteItem operation on an existing item, that item's values will be overwritten by the operation and it will appear like it was updated. To update items, we recommend you use the UpdateItem action.
    
    The individual PutItem and DeleteItem operations specified in BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs, the failed operations are returned in the UnprocessedItems response parameter. You can investigate and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each iteration would check for unprocessed items and submit a new BatchWriteItem request with those unprocessed items until all items have been processed.
    
    If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchWriteItem returns a ProvisionedThroughputExceededException.
    
    If DynamoDB returns any unprocessed items, you should retry the batch operation on those items. However, we strongly recommend that you use an exponential backoff algorithm. If you retry the batch operation immediately, the underlying read or write requests can still fail due to throttling on the individual tables. If you delay the batch operation using exponential backoff, the individual requests in the batch are much more likely to succeed.
    
    For more information, see Batch Operations and Error Handling in the Amazon DynamoDB Developer Guide.
    
    With BatchWriteItem, you can efficiently write or delete large amounts of data, such as from Amazon EMR, or copy data from another database into DynamoDB. In order to improve performance with these large-scale operations, BatchWriteItem does not behave in the same way as individual PutItem and DeleteItem calls would. For example, you cannot specify conditions on individual put and delete requests, and BatchWriteItem does not return deleted items in the response.
    
    If you use a programming language that supports concurrency, you can use threads to write items in parallel. Your application must include the necessary logic to manage the threads. With languages that don't support threading, you must update or delete the specified items one at a time. In both situations, BatchWriteItem performs the specified put and delete operations in parallel, giving you the power of the thread pool approach without having to introduce complexity into your application.
    
    Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.
    
    If one or more of the following is true, DynamoDB rejects the entire batch write operation:
    - One or more tables specified in the BatchWriteItem request does not exist.
    - Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.
    - You try to perform multiple operations on the same item in the same BatchWriteItem request. For example, you cannot put and delete the same item in the same BatchWriteItem request.
    - Your request contains at least two items with identical hash and range keys (which essentially is two put operations).
    - There are more than 25 requests in the batch.
    - Any individual item in a batch exceeds 400 KB.
    - The total request size exceeds 16 MB.
    This is a convenience which creates an instance of the BatchWriteItemRequest.Builder avoiding the need to create one manually via BatchWriteItemRequest.builder()
    Parameters:
    
    batchWriteItemRequest - A Consumer that will call methods on BatchWriteItemInput.Builder to create a request. Represents the input of a BatchWriteItem operation.
    
    Returns:
    
    Result of the BatchWriteItem operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createBackup
```
default CreateBackupResponse createBackup(CreateBackupRequest createBackupRequest)
                                   throws TableNotFoundException,
                                          TableInUseException,
                                          ContinuousBackupsUnavailableException,
                                          BackupInUseException,
                                          LimitExceededException,
                                          InternalServerErrorException,
                                          AwsServiceException,
                                          SdkClientException,
                                          DynamoDbException
```
    Creates a backup for an existing table.
    
    Each time you create an on-demand backup, the entire table data is backed up. There is no limit to the number of on-demand backups that can be taken.
    
    When you create an on-demand backup, a time marker of the request is cataloged, and the backup is created asynchronously, by applying all changes until the time of the request to the last full table snapshot. Backup requests are processed instantaneously and become available for restore within minutes.
    
    You can call CreateBackup at a maximum rate of 50 times per second.
    
    All backups in DynamoDB work without consuming any provisioned throughput on the table.
    
    If you submit a backup request on 2018-12-14 at 14:25:00, the backup is guaranteed to contain all data committed to the table up to 14:24:00, and data committed after 14:26:00 will not be. The backup might contain data modifications made between 14:24:00 and 14:26:00. On-demand backup does not support causal consistency.
    
    Along with data, the following are also included on the backups:
    - Global secondary indexes (GSIs)
    - Local secondary indexes (LSIs)
    - Streams
    - Provisioned read and write capacity
    Parameters:
    
    createBackupRequest -
    
    Returns:
    
    Result of the CreateBackup operation returned by the service.
    
    Throws:
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    TableInUseException - A target table with the specified name is either being created or deleted.
    
    ContinuousBackupsUnavailableException - Backups have not yet been enabled for this table.
    
    BackupInUseException - There is another ongoing conflicting backup control plane operation on the table. The backup is either being created, deleted or restored to a table.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createBackup
```
default CreateBackupResponse createBackup(Consumer<CreateBackupRequest.Builder> createBackupRequest)
                                   throws TableNotFoundException,
                                          TableInUseException,
                                          ContinuousBackupsUnavailableException,
                                          BackupInUseException,
                                          LimitExceededException,
                                          InternalServerErrorException,
                                          AwsServiceException,
                                          SdkClientException,
                                          DynamoDbException
```
    Creates a backup for an existing table.
    
    Each time you create an on-demand backup, the entire table data is backed up. There is no limit to the number of on-demand backups that can be taken.
    
    When you create an on-demand backup, a time marker of the request is cataloged, and the backup is created asynchronously, by applying all changes until the time of the request to the last full table snapshot. Backup requests are processed instantaneously and become available for restore within minutes.
    
    You can call CreateBackup at a maximum rate of 50 times per second.
    
    All backups in DynamoDB work without consuming any provisioned throughput on the table.
    
    If you submit a backup request on 2018-12-14 at 14:25:00, the backup is guaranteed to contain all data committed to the table up to 14:24:00, and data committed after 14:26:00 will not be. The backup might contain data modifications made between 14:24:00 and 14:26:00. On-demand backup does not support causal consistency.
    
    Along with data, the following are also included on the backups:
    - Global secondary indexes (GSIs)
    - Local secondary indexes (LSIs)
    - Streams
    - Provisioned read and write capacity
    This is a convenience which creates an instance of the CreateBackupRequest.Builder avoiding the need to create one manually via CreateBackupRequest.builder()
    Parameters:
    
    createBackupRequest - A Consumer that will call methods on CreateBackupInput.Builder to create a request.
    
    Returns:
    
    Result of the CreateBackup operation returned by the service.
    
    Throws:
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    TableInUseException - A target table with the specified name is either being created or deleted.
    
    ContinuousBackupsUnavailableException - Backups have not yet been enabled for this table.
    
    BackupInUseException - There is another ongoing conflicting backup control plane operation on the table. The backup is either being created, deleted or restored to a table.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createGlobalTable
```
default CreateGlobalTableResponse createGlobalTable(CreateGlobalTableRequest createGlobalTableRequest)
                                             throws LimitExceededException,
                                                    InternalServerErrorException,
                                                    GlobalTableAlreadyExistsException,
                                                    TableNotFoundException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    DynamoDbException
```
    Creates a global table from an existing table. A global table creates a replication relationship between two or more DynamoDB tables with the same table name in the provided Regions.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    If you want to add a new replica table to a global table, each of the following conditions must be true:
    - The table must have the same primary key as all of the other replicas.
    - The table must have the same name as all of the other replicas.
    - The table must have DynamoDB Streams enabled, with the stream containing both the new and the old images of the item.
    - None of the replica tables in the global table can contain any data.
    If global secondary indexes are specified, then the following conditions must also be met:
    - The global secondary indexes must have the same name.
    - The global secondary indexes must have the same hash key and sort key (if present).
    If local secondary indexes are specified, then the following conditions must also be met:
    - The local secondary indexes must have the same name.
    - The local secondary indexes must have the same hash key and sort key (if present).
    Write capacity settings should be set consistently across your replica tables and secondary indexes. DynamoDB strongly recommends enabling auto scaling to manage the write capacity settings for all of your global tables replicas and indexes.
    
    If you prefer to manage write capacity settings manually, you should provision equal replicated write capacity units to your replica tables. You should also provision equal replicated write capacity units to matching secondary indexes across your global table.
    Parameters:
    
    createGlobalTableRequest -
    
    Returns:
    
    Result of the CreateGlobalTable operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    GlobalTableAlreadyExistsException - The specified global table already exists.
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createGlobalTable
```
default CreateGlobalTableResponse createGlobalTable(Consumer<CreateGlobalTableRequest.Builder> createGlobalTableRequest)
                                             throws LimitExceededException,
                                                    InternalServerErrorException,
                                                    GlobalTableAlreadyExistsException,
                                                    TableNotFoundException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    DynamoDbException
```
    Creates a global table from an existing table. A global table creates a replication relationship between two or more DynamoDB tables with the same table name in the provided Regions.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    If you want to add a new replica table to a global table, each of the following conditions must be true:
    - The table must have the same primary key as all of the other replicas.
    - The table must have the same name as all of the other replicas.
    - The table must have DynamoDB Streams enabled, with the stream containing both the new and the old images of the item.
    - None of the replica tables in the global table can contain any data.
    If global secondary indexes are specified, then the following conditions must also be met:
    - The global secondary indexes must have the same name.
    - The global secondary indexes must have the same hash key and sort key (if present).
    If local secondary indexes are specified, then the following conditions must also be met:
    - The local secondary indexes must have the same name.
    - The local secondary indexes must have the same hash key and sort key (if present).
    Write capacity settings should be set consistently across your replica tables and secondary indexes. DynamoDB strongly recommends enabling auto scaling to manage the write capacity settings for all of your global tables replicas and indexes.
    
    If you prefer to manage write capacity settings manually, you should provision equal replicated write capacity units to your replica tables. You should also provision equal replicated write capacity units to matching secondary indexes across your global table.
    
    This is a convenience which creates an instance of the CreateGlobalTableRequest.Builder avoiding the need to create one manually via CreateGlobalTableRequest.builder()
    Parameters:
    
    createGlobalTableRequest - A Consumer that will call methods on CreateGlobalTableInput.Builder to create a request.
    
    Returns:
    
    Result of the CreateGlobalTable operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    GlobalTableAlreadyExistsException - The specified global table already exists.
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createTable
```
default CreateTableResponse createTable(CreateTableRequest createTableRequest)
                                 throws ResourceInUseException,
                                        LimitExceededException,
                                        InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    The CreateTable operation adds a new table to your account. In an Amazon Web Services account, table names must be unique within each Region. That is, you can have two tables with same name if you create the tables in different Regions.
    
    CreateTable is an asynchronous operation. Upon receiving a CreateTable request, DynamoDB immediately returns a response with a TableStatus of CREATING. After the table is created, DynamoDB sets the TableStatus to ACTIVE. You can perform read and write operations only on an ACTIVE table.
    
    You can optionally define secondary indexes on the new table, as part of the CreateTable operation. If you want to create multiple tables with secondary indexes on them, you must create the tables sequentially. Only one table with secondary indexes can be in the CREATING state at any given time.
    
    You can use the DescribeTable action to check the table status.
    
    Parameters:
    
    createTableRequest - Represents the input of a CreateTable operation.
    
    Returns:
    
    Result of the CreateTable operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createTable
```
default CreateTableResponse createTable(Consumer<CreateTableRequest.Builder> createTableRequest)
                                 throws ResourceInUseException,
                                        LimitExceededException,
                                        InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    The CreateTable operation adds a new table to your account. In an Amazon Web Services account, table names must be unique within each Region. That is, you can have two tables with same name if you create the tables in different Regions.
    
    CreateTable is an asynchronous operation. Upon receiving a CreateTable request, DynamoDB immediately returns a response with a TableStatus of CREATING. After the table is created, DynamoDB sets the TableStatus to ACTIVE. You can perform read and write operations only on an ACTIVE table.
    
    You can optionally define secondary indexes on the new table, as part of the CreateTable operation. If you want to create multiple tables with secondary indexes on them, you must create the tables sequentially. Only one table with secondary indexes can be in the CREATING state at any given time.
    
    You can use the DescribeTable action to check the table status.
    
    This is a convenience which creates an instance of the CreateTableRequest.Builder avoiding the need to create one manually via CreateTableRequest.builder()
    
    Parameters:
    
    createTableRequest - A Consumer that will call methods on CreateTableInput.Builder to create a request. Represents the input of a CreateTable operation.
    
    Returns:
    
    Result of the CreateTable operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteBackup
```
default DeleteBackupResponse deleteBackup(DeleteBackupRequest deleteBackupRequest)
                                   throws BackupNotFoundException,
                                          BackupInUseException,
                                          LimitExceededException,
                                          InternalServerErrorException,
                                          AwsServiceException,
                                          SdkClientException,
                                          DynamoDbException
```
    Deletes an existing backup of a table.
    
    You can call DeleteBackup at a maximum rate of 10 times per second.
    
    Parameters:
    
    deleteBackupRequest -
    
    Returns:
    
    Result of the DeleteBackup operation returned by the service.
    
    Throws:
    
    BackupNotFoundException - Backup not found for the given BackupARN.
    
    BackupInUseException - There is another ongoing conflicting backup control plane operation on the table. The backup is either being created, deleted or restored to a table.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteBackup
```
default DeleteBackupResponse deleteBackup(Consumer<DeleteBackupRequest.Builder> deleteBackupRequest)
                                   throws BackupNotFoundException,
                                          BackupInUseException,
                                          LimitExceededException,
                                          InternalServerErrorException,
                                          AwsServiceException,
                                          SdkClientException,
                                          DynamoDbException
```
    Deletes an existing backup of a table.
    
    You can call DeleteBackup at a maximum rate of 10 times per second.
    
    This is a convenience which creates an instance of the DeleteBackupRequest.Builder avoiding the need to create one manually via DeleteBackupRequest.builder()
    
    Parameters:
    
    deleteBackupRequest - A Consumer that will call methods on DeleteBackupInput.Builder to create a request.
    
    Returns:
    
    Result of the DeleteBackup operation returned by the service.
    
    Throws:
    
    BackupNotFoundException - Backup not found for the given BackupARN.
    
    BackupInUseException - There is another ongoing conflicting backup control plane operation on the table. The backup is either being created, deleted or restored to a table.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteItem
```
default DeleteItemResponse deleteItem(DeleteItemRequest deleteItemRequest)
                               throws ConditionalCheckFailedException,
                                      ProvisionedThroughputExceededException,
                                      ResourceNotFoundException,
                                      ItemCollectionSizeLimitExceededException,
                                      TransactionConflictException,
                                      RequestLimitExceededException,
                                      InternalServerErrorException,
                                      AwsServiceException,
                                      SdkClientException,
                                      DynamoDbException
```
    Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.
    
    In addition to deleting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
    
    Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times on the same item or attribute does not result in an error response.
    
    Conditional deletes are useful for deleting items only if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.
    
    Parameters:
    
    deleteItemRequest - Represents the input of a DeleteItem operation.
    
    Returns:
    
    Result of the DeleteItem operation returned by the service.
    
    Throws:
    
    ConditionalCheckFailedException - A condition specified in the operation could not be evaluated.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    TransactionConflictException - Operation was rejected because there is an ongoing transaction for the item.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteItem
```
default DeleteItemResponse deleteItem(Consumer<DeleteItemRequest.Builder> deleteItemRequest)
                               throws ConditionalCheckFailedException,
                                      ProvisionedThroughputExceededException,
                                      ResourceNotFoundException,
                                      ItemCollectionSizeLimitExceededException,
                                      TransactionConflictException,
                                      RequestLimitExceededException,
                                      InternalServerErrorException,
                                      AwsServiceException,
                                      SdkClientException,
                                      DynamoDbException
```
    Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.
    
    In addition to deleting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
    
    Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times on the same item or attribute does not result in an error response.
    
    Conditional deletes are useful for deleting items only if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.
    
    This is a convenience which creates an instance of the DeleteItemRequest.Builder avoiding the need to create one manually via DeleteItemRequest.builder()
    
    Parameters:
    
    deleteItemRequest - A Consumer that will call methods on DeleteItemInput.Builder to create a request. Represents the input of a DeleteItem operation.
    
    Returns:
    
    Result of the DeleteItem operation returned by the service.
    
    Throws:
    
    ConditionalCheckFailedException - A condition specified in the operation could not be evaluated.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    TransactionConflictException - Operation was rejected because there is an ongoing transaction for the item.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteTable
```
default DeleteTableResponse deleteTable(DeleteTableRequest deleteTableRequest)
                                 throws ResourceInUseException,
                                        ResourceNotFoundException,
                                        LimitExceededException,
                                        InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    The DeleteTable operation deletes a table and all of its items. After a DeleteTable request, the specified table is in the DELETING state until DynamoDB completes the deletion. If the table is in the ACTIVE state, you can delete it. If a table is in CREATING or UPDATING states, then DynamoDB returns a ResourceInUseException. If the specified table does not exist, DynamoDB returns a ResourceNotFoundException. If table is already in the DELETING state, no error is returned.
    
    DynamoDB might continue to accept data read and write operations, such as GetItem and PutItem, on a table in the DELETING state until the table deletion is complete.
    
    When you delete a table, any indexes on that table are also deleted.
    
    If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the DISABLED state, and the stream is automatically deleted after 24 hours.
    
    Use the DescribeTable action to check the status of the table.
    
    Parameters:
    
    deleteTableRequest - Represents the input of a DeleteTable operation.
    
    Returns:
    
    Result of the DeleteTable operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteTable
```
default DeleteTableResponse deleteTable(Consumer<DeleteTableRequest.Builder> deleteTableRequest)
                                 throws ResourceInUseException,
                                        ResourceNotFoundException,
                                        LimitExceededException,
                                        InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    The DeleteTable operation deletes a table and all of its items. After a DeleteTable request, the specified table is in the DELETING state until DynamoDB completes the deletion. If the table is in the ACTIVE state, you can delete it. If a table is in CREATING or UPDATING states, then DynamoDB returns a ResourceInUseException. If the specified table does not exist, DynamoDB returns a ResourceNotFoundException. If table is already in the DELETING state, no error is returned.
    
    DynamoDB might continue to accept data read and write operations, such as GetItem and PutItem, on a table in the DELETING state until the table deletion is complete.
    
    When you delete a table, any indexes on that table are also deleted.
    
    If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the DISABLED state, and the stream is automatically deleted after 24 hours.
    
    Use the DescribeTable action to check the status of the table.
    
    This is a convenience which creates an instance of the DeleteTableRequest.Builder avoiding the need to create one manually via DeleteTableRequest.builder()
    
    Parameters:
    
    deleteTableRequest - A Consumer that will call methods on DeleteTableInput.Builder to create a request. Represents the input of a DeleteTable operation.
    
    Returns:
    
    Result of the DeleteTable operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeBackup
```
default DescribeBackupResponse describeBackup(DescribeBackupRequest describeBackupRequest)
                                       throws BackupNotFoundException,
                                              InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Describes an existing backup of a table.
    
    You can call DescribeBackup at a maximum rate of 10 times per second.
    
    Parameters:
    
    describeBackupRequest -
    
    Returns:
    
    Result of the DescribeBackup operation returned by the service.
    
    Throws:
    
    BackupNotFoundException - Backup not found for the given BackupARN.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeBackup
```
default DescribeBackupResponse describeBackup(Consumer<DescribeBackupRequest.Builder> describeBackupRequest)
                                       throws BackupNotFoundException,
                                              InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Describes an existing backup of a table.
    
    You can call DescribeBackup at a maximum rate of 10 times per second.
    
    This is a convenience which creates an instance of the DescribeBackupRequest.Builder avoiding the need to create one manually via DescribeBackupRequest.builder()
    
    Parameters:
    
    describeBackupRequest - A Consumer that will call methods on DescribeBackupInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeBackup operation returned by the service.
    
    Throws:
    
    BackupNotFoundException - Backup not found for the given BackupARN.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeContinuousBackups
```
default DescribeContinuousBackupsResponse describeContinuousBackups(DescribeContinuousBackupsRequest describeContinuousBackupsRequest)
                                                             throws TableNotFoundException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    DynamoDbException
```
    Checks the status of continuous backups and point in time recovery on the specified table. Continuous backups are ENABLED on all tables at table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to ENABLED.
    
    After continuous backups and point in time recovery are enabled, you can restore to any point in time within EarliestRestorableDateTime and LatestRestorableDateTime.
    
    LatestRestorableDateTime is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days.
    
    You can call DescribeContinuousBackups at a maximum rate of 10 times per second.
    
    Parameters:
    
    describeContinuousBackupsRequest -
    
    Returns:
    
    Result of the DescribeContinuousBackups operation returned by the service.
    
    Throws:
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeContinuousBackups
```
default DescribeContinuousBackupsResponse describeContinuousBackups(Consumer<DescribeContinuousBackupsRequest.Builder> describeContinuousBackupsRequest)
                                                             throws TableNotFoundException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    DynamoDbException
```
    Checks the status of continuous backups and point in time recovery on the specified table. Continuous backups are ENABLED on all tables at table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to ENABLED.
    
    After continuous backups and point in time recovery are enabled, you can restore to any point in time within EarliestRestorableDateTime and LatestRestorableDateTime.
    
    LatestRestorableDateTime is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days.
    
    You can call DescribeContinuousBackups at a maximum rate of 10 times per second.
    
    This is a convenience which creates an instance of the DescribeContinuousBackupsRequest.Builder avoiding the need to create one manually via DescribeContinuousBackupsRequest.builder()
    
    Parameters:
    
    describeContinuousBackupsRequest - A Consumer that will call methods on DescribeContinuousBackupsInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeContinuousBackups operation returned by the service.
    
    Throws:
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeContributorInsights
```
default DescribeContributorInsightsResponse describeContributorInsights(DescribeContributorInsightsRequest describeContributorInsightsRequest)
                                                                 throws ResourceNotFoundException,
                                                                        InternalServerErrorException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        DynamoDbException
```
    Returns information about contributor insights, for a given table or global secondary index.
    
    Parameters:
    
    describeContributorInsightsRequest -
    
    Returns:
    
    Result of the DescribeContributorInsights operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeContributorInsights
```
default DescribeContributorInsightsResponse describeContributorInsights(Consumer<DescribeContributorInsightsRequest.Builder> describeContributorInsightsRequest)
                                                                 throws ResourceNotFoundException,
                                                                        InternalServerErrorException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        DynamoDbException
```
    Returns information about contributor insights, for a given table or global secondary index.
    
    This is a convenience which creates an instance of the DescribeContributorInsightsRequest.Builder avoiding the need to create one manually via DescribeContributorInsightsRequest.builder()
    
    Parameters:
    
    describeContributorInsightsRequest - A Consumer that will call methods on DescribeContributorInsightsInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeContributorInsights operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeEndpoints
```
default DescribeEndpointsResponse describeEndpoints()
                                             throws AwsServiceException,
                                                    SdkClientException,
                                                    DynamoDbException
```
    Returns the regional endpoint information.
    
    Returns:
    
    Result of the DescribeEndpoints operation returned by the service.
    
    Throws:
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    describeEndpoints(DescribeEndpointsRequest), AWS API Documentation
  - describeEndpoints
```
default DescribeEndpointsResponse describeEndpoints(DescribeEndpointsRequest describeEndpointsRequest)
                                             throws AwsServiceException,
                                                    SdkClientException,
                                                    DynamoDbException
```
    Returns the regional endpoint information.
    
    Parameters:
    
    describeEndpointsRequest -
    
    Returns:
    
    Result of the DescribeEndpoints operation returned by the service.
    
    Throws:
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeEndpoints
```
default DescribeEndpointsResponse describeEndpoints(Consumer<DescribeEndpointsRequest.Builder> describeEndpointsRequest)
                                             throws AwsServiceException,
                                                    SdkClientException,
                                                    DynamoDbException
```
    Returns the regional endpoint information.
    
    This is a convenience which creates an instance of the DescribeEndpointsRequest.Builder avoiding the need to create one manually via DescribeEndpointsRequest.builder()
    
    Parameters:
    
    describeEndpointsRequest - A Consumer that will call methods on DescribeEndpointsRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeEndpoints operation returned by the service.
    
    Throws:
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeExport
```
default DescribeExportResponse describeExport(DescribeExportRequest describeExportRequest)
                                       throws ExportNotFoundException,
                                              LimitExceededException,
                                              InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Describes an existing table export.
    
    Parameters:
    
    describeExportRequest -
    
    Returns:
    
    Result of the DescribeExport operation returned by the service.
    
    Throws:
    
    ExportNotFoundException - The specified export was not found.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeExport
```
default DescribeExportResponse describeExport(Consumer<DescribeExportRequest.Builder> describeExportRequest)
                                       throws ExportNotFoundException,
                                              LimitExceededException,
                                              InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Describes an existing table export.
    
    This is a convenience which creates an instance of the DescribeExportRequest.Builder avoiding the need to create one manually via DescribeExportRequest.builder()
    
    Parameters:
    
    describeExportRequest - A Consumer that will call methods on DescribeExportInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeExport operation returned by the service.
    
    Throws:
    
    ExportNotFoundException - The specified export was not found.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeGlobalTable
```
default DescribeGlobalTableResponse describeGlobalTable(DescribeGlobalTableRequest describeGlobalTableRequest)
                                                 throws InternalServerErrorException,
                                                        GlobalTableNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        DynamoDbException
```
    Returns information about the specified global table.
    
    This operation only applies to Version 2017.11.29 of global tables. If you are using global tables Version 2019.11.21 you can use DescribeTable instead.
    
    Parameters:
    
    describeGlobalTableRequest -
    
    Returns:
    
    Result of the DescribeGlobalTable operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    GlobalTableNotFoundException - The specified global table does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeGlobalTable
```
default DescribeGlobalTableResponse describeGlobalTable(Consumer<DescribeGlobalTableRequest.Builder> describeGlobalTableRequest)
                                                 throws InternalServerErrorException,
                                                        GlobalTableNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        DynamoDbException
```
    Returns information about the specified global table.
    
    This operation only applies to Version 2017.11.29 of global tables. If you are using global tables Version 2019.11.21 you can use DescribeTable instead.
    
    This is a convenience which creates an instance of the DescribeGlobalTableRequest.Builder avoiding the need to create one manually via DescribeGlobalTableRequest.builder()
    
    Parameters:
    
    describeGlobalTableRequest - A Consumer that will call methods on DescribeGlobalTableInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeGlobalTable operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    GlobalTableNotFoundException - The specified global table does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeGlobalTableSettings
```
default DescribeGlobalTableSettingsResponse describeGlobalTableSettings(DescribeGlobalTableSettingsRequest describeGlobalTableSettingsRequest)
                                                                 throws GlobalTableNotFoundException,
                                                                        InternalServerErrorException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        DynamoDbException
```
    Describes Region-specific settings for a global table.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    Parameters:
    
    describeGlobalTableSettingsRequest -
    
    Returns:
    
    Result of the DescribeGlobalTableSettings operation returned by the service.
    
    Throws:
    
    GlobalTableNotFoundException - The specified global table does not exist.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeGlobalTableSettings
```
default DescribeGlobalTableSettingsResponse describeGlobalTableSettings(Consumer<DescribeGlobalTableSettingsRequest.Builder> describeGlobalTableSettingsRequest)
                                                                 throws GlobalTableNotFoundException,
                                                                        InternalServerErrorException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        DynamoDbException
```
    Describes Region-specific settings for a global table.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    This is a convenience which creates an instance of the DescribeGlobalTableSettingsRequest.Builder avoiding the need to create one manually via DescribeGlobalTableSettingsRequest.builder()
    
    Parameters:
    
    describeGlobalTableSettingsRequest - A Consumer that will call methods on DescribeGlobalTableSettingsInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeGlobalTableSettings operation returned by the service.
    
    Throws:
    
    GlobalTableNotFoundException - The specified global table does not exist.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeImport
```
default DescribeImportResponse describeImport(DescribeImportRequest describeImportRequest)
                                       throws ImportNotFoundException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Represents the properties of the import.
    
    Parameters:
    
    describeImportRequest -
    
    Returns:
    
    Result of the DescribeImport operation returned by the service.
    
    Throws:
    
    ImportNotFoundException - The specified import was not found.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeImport
```
default DescribeImportResponse describeImport(Consumer<DescribeImportRequest.Builder> describeImportRequest)
                                       throws ImportNotFoundException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Represents the properties of the import.
    
    This is a convenience which creates an instance of the DescribeImportRequest.Builder avoiding the need to create one manually via DescribeImportRequest.builder()
    
    Parameters:
    
    describeImportRequest - A Consumer that will call methods on DescribeImportInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeImport operation returned by the service.
    
    Throws:
    
    ImportNotFoundException - The specified import was not found.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeKinesisStreamingDestination
```
default DescribeKinesisStreamingDestinationResponse describeKinesisStreamingDestination(DescribeKinesisStreamingDestinationRequest describeKinesisStreamingDestinationRequest)
                                                                                 throws ResourceNotFoundException,
                                                                                        InternalServerErrorException,
                                                                                        AwsServiceException,
                                                                                        SdkClientException,
                                                                                        DynamoDbException
```
    Returns information about the status of Kinesis streaming.
    
    Parameters:
    
    describeKinesisStreamingDestinationRequest -
    
    Returns:
    
    Result of the DescribeKinesisStreamingDestination operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeKinesisStreamingDestination
```
default DescribeKinesisStreamingDestinationResponse describeKinesisStreamingDestination(Consumer<DescribeKinesisStreamingDestinationRequest.Builder> describeKinesisStreamingDestinationRequest)
                                                                                 throws ResourceNotFoundException,
                                                                                        InternalServerErrorException,
                                                                                        AwsServiceException,
                                                                                        SdkClientException,
                                                                                        DynamoDbException
```
    Returns information about the status of Kinesis streaming.
    
    This is a convenience which creates an instance of the DescribeKinesisStreamingDestinationRequest.Builder avoiding the need to create one manually via DescribeKinesisStreamingDestinationRequest.builder()
    
    Parameters:
    
    describeKinesisStreamingDestinationRequest - A Consumer that will call methods on DescribeKinesisStreamingDestinationInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeKinesisStreamingDestination operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeLimits
```
default DescribeLimitsResponse describeLimits()
                                       throws InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Returns the current provisioned-capacity quotas for your Amazon Web Services account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
    
    When you establish an Amazon Web Services account, the account has initial quotas on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given Region. Also, there are per-table quotas that apply when you create a table there. For more information, see Service, Account, and Table Quotas page in the Amazon DynamoDB Developer Guide.
    
    Although you can increase these quotas by filing a case at Amazon Web Services Support Center, obtaining the increase is not instantaneous. The DescribeLimits action lets you write code to compare the capacity you are currently using to those quotas imposed by your account so that you have enough time to apply for an increase before you hit a quota.
    
    For example, you could use one of the Amazon Web Services SDKs to do the following:
    1. Call DescribeLimits for a particular Region to obtain your current account quotas on provisioned capacity there.
    2. Create a variable to hold the aggregate read capacity units provisioned for all your tables in that Region, and one to hold the aggregate write capacity units. Zero them both.
    3. Call ListTables to obtain a list of all your DynamoDB tables.
    4. For each table name listed by ListTables, do the following:
      
      Call DescribeTable with the table name.
      
      Use the data returned by DescribeTable to add the read capacity units and write capacity units provisioned for the table itself to your variables.
      
      If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.
    5. Report the account quotas for that Region returned by DescribeLimits, along with the total current provisioned capacity levels you have calculated.
    This will let you see whether you are getting close to your account-level quotas.
    
    The per-table quotas apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes.
    
    For existing tables and their GSIs, DynamoDB doesn't let you increase provisioned capacity extremely rapidly, but the only quota that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account quotas.
    
    DescribeLimits should only be called periodically. You can expect throttling errors if you call it more than once in a minute.
    
    The DescribeLimits Request element has no content.
    Returns:
    
    Result of the DescribeLimits operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    describeLimits(DescribeLimitsRequest), AWS API Documentation
  - describeLimits
```
default DescribeLimitsResponse describeLimits(DescribeLimitsRequest describeLimitsRequest)
                                       throws InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Returns the current provisioned-capacity quotas for your Amazon Web Services account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
    
    When you establish an Amazon Web Services account, the account has initial quotas on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given Region. Also, there are per-table quotas that apply when you create a table there. For more information, see Service, Account, and Table Quotas page in the Amazon DynamoDB Developer Guide.
    
    Although you can increase these quotas by filing a case at Amazon Web Services Support Center, obtaining the increase is not instantaneous. The DescribeLimits action lets you write code to compare the capacity you are currently using to those quotas imposed by your account so that you have enough time to apply for an increase before you hit a quota.
    
    For example, you could use one of the Amazon Web Services SDKs to do the following:
    1. Call DescribeLimits for a particular Region to obtain your current account quotas on provisioned capacity there.
    2. Create a variable to hold the aggregate read capacity units provisioned for all your tables in that Region, and one to hold the aggregate write capacity units. Zero them both.
    3. Call ListTables to obtain a list of all your DynamoDB tables.
    4. For each table name listed by ListTables, do the following:
      
      Call DescribeTable with the table name.
      
      Use the data returned by DescribeTable to add the read capacity units and write capacity units provisioned for the table itself to your variables.
      
      If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.
    5. Report the account quotas for that Region returned by DescribeLimits, along with the total current provisioned capacity levels you have calculated.
    This will let you see whether you are getting close to your account-level quotas.
    
    The per-table quotas apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes.
    
    For existing tables and their GSIs, DynamoDB doesn't let you increase provisioned capacity extremely rapidly, but the only quota that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account quotas.
    
    DescribeLimits should only be called periodically. You can expect throttling errors if you call it more than once in a minute.
    
    The DescribeLimits Request element has no content.
    Parameters:
    
    describeLimitsRequest - Represents the input of a DescribeLimits operation. Has no content.
    
    Returns:
    
    Result of the DescribeLimits operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeLimits
```
default DescribeLimitsResponse describeLimits(Consumer<DescribeLimitsRequest.Builder> describeLimitsRequest)
                                       throws InternalServerErrorException,
                                              AwsServiceException,
                                              SdkClientException,
                                              DynamoDbException
```
    Returns the current provisioned-capacity quotas for your Amazon Web Services account in a Region, both for the Region as a whole and for any one DynamoDB table that you create there.
    
    When you establish an Amazon Web Services account, the account has initial quotas on the maximum read capacity units and write capacity units that you can provision across all of your DynamoDB tables in a given Region. Also, there are per-table quotas that apply when you create a table there. For more information, see Service, Account, and Table Quotas page in the Amazon DynamoDB Developer Guide.
    
    Although you can increase these quotas by filing a case at Amazon Web Services Support Center, obtaining the increase is not instantaneous. The DescribeLimits action lets you write code to compare the capacity you are currently using to those quotas imposed by your account so that you have enough time to apply for an increase before you hit a quota.
    
    For example, you could use one of the Amazon Web Services SDKs to do the following:
    1. Call DescribeLimits for a particular Region to obtain your current account quotas on provisioned capacity there.
    2. Create a variable to hold the aggregate read capacity units provisioned for all your tables in that Region, and one to hold the aggregate write capacity units. Zero them both.
    3. Call ListTables to obtain a list of all your DynamoDB tables.
    4. For each table name listed by ListTables, do the following:
      
      Call DescribeTable with the table name.
      
      Use the data returned by DescribeTable to add the read capacity units and write capacity units provisioned for the table itself to your variables.
      
      If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.
    5. Report the account quotas for that Region returned by DescribeLimits, along with the total current provisioned capacity levels you have calculated.
    This will let you see whether you are getting close to your account-level quotas.
    
    The per-table quotas apply only when you are creating a new table. They restrict the sum of the provisioned capacity of the new table itself and all its global secondary indexes.
    
    For existing tables and their GSIs, DynamoDB doesn't let you increase provisioned capacity extremely rapidly, but the only quota that applies is that the aggregate provisioned capacity over all your tables and GSIs cannot exceed either of the per-account quotas.
    
    DescribeLimits should only be called periodically. You can expect throttling errors if you call it more than once in a minute.
    
    The DescribeLimits Request element has no content.
    
    This is a convenience which creates an instance of the DescribeLimitsRequest.Builder avoiding the need to create one manually via DescribeLimitsRequest.builder()
    Parameters:
    
    describeLimitsRequest - A Consumer that will call methods on DescribeLimitsInput.Builder to create a request. Represents the input of a DescribeLimits operation. Has no content.
    
    Returns:
    
    Result of the DescribeLimits operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeTable
```
default DescribeTableResponse describeTable(DescribeTableRequest describeTableRequest)
                                     throws ResourceNotFoundException,
                                            InternalServerErrorException,
                                            AwsServiceException,
                                            SdkClientException,
                                            DynamoDbException
```
    Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
    
    If you issue a DescribeTable request immediately after a CreateTable request, DynamoDB might return a ResourceNotFoundException. This is because DescribeTable uses an eventually consistent query, and the metadata for your table might not be available at that moment. Wait for a few seconds, and then try the DescribeTable request again.
    
    Parameters:
    
    describeTableRequest - Represents the input of a DescribeTable operation.
    
    Returns:
    
    Result of the DescribeTable operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeTable
```
default DescribeTableResponse describeTable(Consumer<DescribeTableRequest.Builder> describeTableRequest)
                                     throws ResourceNotFoundException,
                                            InternalServerErrorException,
                                            AwsServiceException,
                                            SdkClientException,
                                            DynamoDbException
```
    Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
    
    If you issue a DescribeTable request immediately after a CreateTable request, DynamoDB might return a ResourceNotFoundException. This is because DescribeTable uses an eventually consistent query, and the metadata for your table might not be available at that moment. Wait for a few seconds, and then try the DescribeTable request again.
    
    This is a convenience which creates an instance of the DescribeTableRequest.Builder avoiding the need to create one manually via DescribeTableRequest.builder()
    
    Parameters:
    
    describeTableRequest - A Consumer that will call methods on DescribeTableInput.Builder to create a request. Represents the input of a DescribeTable operation.
    
    Returns:
    
    Result of the DescribeTable operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeTableReplicaAutoScaling
```
default DescribeTableReplicaAutoScalingResponse describeTableReplicaAutoScaling(DescribeTableReplicaAutoScalingRequest describeTableReplicaAutoScalingRequest)
                                                                         throws ResourceNotFoundException,
                                                                                InternalServerErrorException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                DynamoDbException
```
    Describes auto scaling settings across replicas of the global table at once.
    
    This operation only applies to Version 2019.11.21 of global tables.
    
    Parameters:
    
    describeTableReplicaAutoScalingRequest -
    
    Returns:
    
    Result of the DescribeTableReplicaAutoScaling operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeTableReplicaAutoScaling
```
default DescribeTableReplicaAutoScalingResponse describeTableReplicaAutoScaling(Consumer<DescribeTableReplicaAutoScalingRequest.Builder> describeTableReplicaAutoScalingRequest)
                                                                         throws ResourceNotFoundException,
                                                                                InternalServerErrorException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                DynamoDbException
```
    Describes auto scaling settings across replicas of the global table at once.
    
    This operation only applies to Version 2019.11.21 of global tables.
    
    This is a convenience which creates an instance of the DescribeTableReplicaAutoScalingRequest.Builder avoiding the need to create one manually via DescribeTableReplicaAutoScalingRequest.builder()
    
    Parameters:
    
    describeTableReplicaAutoScalingRequest - A Consumer that will call methods on DescribeTableReplicaAutoScalingInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeTableReplicaAutoScaling operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeTimeToLive
```
default DescribeTimeToLiveResponse describeTimeToLive(DescribeTimeToLiveRequest describeTimeToLiveRequest)
                                               throws ResourceNotFoundException,
                                                      InternalServerErrorException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      DynamoDbException
```
    Gives a description of the Time to Live (TTL) status on the specified table.
    
    Parameters:
    
    describeTimeToLiveRequest -
    
    Returns:
    
    Result of the DescribeTimeToLive operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeTimeToLive
```
default DescribeTimeToLiveResponse describeTimeToLive(Consumer<DescribeTimeToLiveRequest.Builder> describeTimeToLiveRequest)
                                               throws ResourceNotFoundException,
                                                      InternalServerErrorException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      DynamoDbException
```
    Gives a description of the Time to Live (TTL) status on the specified table.
    
    This is a convenience which creates an instance of the DescribeTimeToLiveRequest.Builder avoiding the need to create one manually via DescribeTimeToLiveRequest.builder()
    
    Parameters:
    
    describeTimeToLiveRequest - A Consumer that will call methods on DescribeTimeToLiveInput.Builder to create a request.
    
    Returns:
    
    Result of the DescribeTimeToLive operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableKinesisStreamingDestination
```
default DisableKinesisStreamingDestinationResponse disableKinesisStreamingDestination(DisableKinesisStreamingDestinationRequest disableKinesisStreamingDestinationRequest)
                                                                               throws InternalServerErrorException,
                                                                                      LimitExceededException,
                                                                                      ResourceInUseException,
                                                                                      ResourceNotFoundException,
                                                                                      AwsServiceException,
                                                                                      SdkClientException,
                                                                                      DynamoDbException
```
    Stops replication from the DynamoDB table to the Kinesis data stream. This is done without deleting either of the resources.
    
    Parameters:
    
    disableKinesisStreamingDestinationRequest -
    
    Returns:
    
    Result of the DisableKinesisStreamingDestination operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableKinesisStreamingDestination
```
default DisableKinesisStreamingDestinationResponse disableKinesisStreamingDestination(Consumer<DisableKinesisStreamingDestinationRequest.Builder> disableKinesisStreamingDestinationRequest)
                                                                               throws InternalServerErrorException,
                                                                                      LimitExceededException,
                                                                                      ResourceInUseException,
                                                                                      ResourceNotFoundException,
                                                                                      AwsServiceException,
                                                                                      SdkClientException,
                                                                                      DynamoDbException
```
    Stops replication from the DynamoDB table to the Kinesis data stream. This is done without deleting either of the resources.
    
    This is a convenience which creates an instance of the DisableKinesisStreamingDestinationRequest.Builder avoiding the need to create one manually via DisableKinesisStreamingDestinationRequest.builder()
    
    Parameters:
    
    disableKinesisStreamingDestinationRequest - A Consumer that will call methods on KinesisStreamingDestinationInput.Builder to create a request.
    
    Returns:
    
    Result of the DisableKinesisStreamingDestination operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableKinesisStreamingDestination
```
default EnableKinesisStreamingDestinationResponse enableKinesisStreamingDestination(EnableKinesisStreamingDestinationRequest enableKinesisStreamingDestinationRequest)
                                                                             throws InternalServerErrorException,
                                                                                    LimitExceededException,
                                                                                    ResourceInUseException,
                                                                                    ResourceNotFoundException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    DynamoDbException
```
    Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow. If this operation doesn't return results immediately, use DescribeKinesisStreamingDestination to check if streaming to the Kinesis data stream is ACTIVE.
    
    Parameters:
    
    enableKinesisStreamingDestinationRequest -
    
    Returns:
    
    Result of the EnableKinesisStreamingDestination operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableKinesisStreamingDestination
```
default EnableKinesisStreamingDestinationResponse enableKinesisStreamingDestination(Consumer<EnableKinesisStreamingDestinationRequest.Builder> enableKinesisStreamingDestinationRequest)
                                                                             throws InternalServerErrorException,
                                                                                    LimitExceededException,
                                                                                    ResourceInUseException,
                                                                                    ResourceNotFoundException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    DynamoDbException
```
    Starts table data replication to the specified Kinesis data stream at a timestamp chosen during the enable workflow. If this operation doesn't return results immediately, use DescribeKinesisStreamingDestination to check if streaming to the Kinesis data stream is ACTIVE.
    
    This is a convenience which creates an instance of the EnableKinesisStreamingDestinationRequest.Builder avoiding the need to create one manually via EnableKinesisStreamingDestinationRequest.builder()
    
    Parameters:
    
    enableKinesisStreamingDestinationRequest - A Consumer that will call methods on KinesisStreamingDestinationInput.Builder to create a request.
    
    Returns:
    
    Result of the EnableKinesisStreamingDestination operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - executeStatement
```
default ExecuteStatementResponse executeStatement(ExecuteStatementRequest executeStatementRequest)
                                           throws ConditionalCheckFailedException,
                                                  ProvisionedThroughputExceededException,
                                                  ResourceNotFoundException,
                                                  ItemCollectionSizeLimitExceededException,
                                                  TransactionConflictException,
                                                  RequestLimitExceededException,
                                                  InternalServerErrorException,
                                                  DuplicateItemException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
    
    For PartiQL reads (SELECT statement), if the total number of processed items exceeds the maximum dataset size limit of 1 MB, the read stops and results are returned to the user as a LastEvaluatedKey value to continue the read in a subsequent operation. If the filter criteria in WHERE clause does not match any data, the read will return an empty result set.
    
    A single SELECT statement response can return up to the maximum number of items (if using the Limit parameter) or a maximum of 1 MB of data (and then apply any filtering to the results using WHERE clause). If LastEvaluatedKey is present in the response, you need to paginate the result set.
    
    Parameters:
    
    executeStatementRequest -
    
    Returns:
    
    Result of the ExecuteStatement operation returned by the service.
    
    Throws:
    
    ConditionalCheckFailedException - A condition specified in the operation could not be evaluated.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    TransactionConflictException - Operation was rejected because there is an ongoing transaction for the item.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    DuplicateItemException - There was an attempt to insert an item with the same primary key as an item that already exists in the DynamoDB table.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - executeStatement
```
default ExecuteStatementResponse executeStatement(Consumer<ExecuteStatementRequest.Builder> executeStatementRequest)
                                           throws ConditionalCheckFailedException,
                                                  ProvisionedThroughputExceededException,
                                                  ResourceNotFoundException,
                                                  ItemCollectionSizeLimitExceededException,
                                                  TransactionConflictException,
                                                  RequestLimitExceededException,
                                                  InternalServerErrorException,
                                                  DuplicateItemException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
    
    For PartiQL reads (SELECT statement), if the total number of processed items exceeds the maximum dataset size limit of 1 MB, the read stops and results are returned to the user as a LastEvaluatedKey value to continue the read in a subsequent operation. If the filter criteria in WHERE clause does not match any data, the read will return an empty result set.
    
    A single SELECT statement response can return up to the maximum number of items (if using the Limit parameter) or a maximum of 1 MB of data (and then apply any filtering to the results using WHERE clause). If LastEvaluatedKey is present in the response, you need to paginate the result set.
    
    This is a convenience which creates an instance of the ExecuteStatementRequest.Builder avoiding the need to create one manually via ExecuteStatementRequest.builder()
    
    Parameters:
    
    executeStatementRequest - A Consumer that will call methods on ExecuteStatementInput.Builder to create a request.
    
    Returns:
    
    Result of the ExecuteStatement operation returned by the service.
    
    Throws:
    
    ConditionalCheckFailedException - A condition specified in the operation could not be evaluated.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    TransactionConflictException - Operation was rejected because there is an ongoing transaction for the item.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    DuplicateItemException - There was an attempt to insert an item with the same primary key as an item that already exists in the DynamoDB table.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - executeTransaction
```
default ExecuteTransactionResponse executeTransaction(ExecuteTransactionRequest executeTransactionRequest)
                                               throws ResourceNotFoundException,
                                                      TransactionCanceledException,
                                                      TransactionInProgressException,
                                                      IdempotentParameterMismatchException,
                                                      ProvisionedThroughputExceededException,
                                                      RequestLimitExceededException,
                                                      InternalServerErrorException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      DynamoDbException
```
    This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
    
    The entire transaction must consist of either read statements or write statements, you cannot mix both in one transaction. The EXISTS function is an exception and can be used to check the condition of specific attributes of the item in a similar manner to ConditionCheck in the TransactWriteItems API.
    Parameters:
    
    executeTransactionRequest -
    
    Returns:
    
    Result of the ExecuteTransaction operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    TransactionCanceledException - The entire transaction request was canceled.
    
    DynamoDB cancels a TransactWriteItems request under the following circumstances:
    
    A condition in one of the condition expressions is not met.
    
    A table in the TransactWriteItems request is in a different account or region.
    
    More than one action in the TransactWriteItems operation targets the same item.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    An item size becomes too large (larger than 400 KB), or a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    
    There is a user error, such as an invalid data format.
    
    DynamoDB cancels a TransactGetItems request under the following circumstances:
    
    There is an ongoing TransactGetItems operation that conflicts with a concurrent PutItem, UpdateItem, DeleteItem or TransactWriteItems request. In this case the TransactGetItems operation fails with a TransactionCanceledException.
    
    A table in the TransactGetItems request is in a different account or region.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    There is a user error, such as an invalid data format.
    
    If using Java, DynamoDB lists the cancellation reasons on the CancellationReasons property. This property is not set for other languages. Transaction cancellation reasons are ordered in the order of requested items, if an item has no error it will have None code and Null message.
    
    Cancellation reason codes and possible error messages:
    
    No Errors:
    
    Code: None
    
    Message: null
    
    Conditional Check Failed:
    
    Code: ConditionalCheckFailed
    
    Message: The conditional request failed.
    
    Item Collection Size Limit Exceeded:
    
    Code: ItemCollectionSizeLimitExceeded
    
    Message: Collection size exceeded.
    
    Transaction Conflict:
    
    Code: TransactionConflict
    
    Message: Transaction is ongoing for the item.
    
    Provisioned Throughput Exceeded:
    
    Code: ProvisionedThroughputExceeded
    
    Messages:
    
    The level of configured provisioned throughput for the table was exceeded. Consider increasing your provisioning level with the UpdateTable API.
    
    This Message is received when provisioned throughput is exceeded is on a provisioned DynamoDB table.
    
    The level of configured provisioned throughput for one or more global secondary indexes of the table was exceeded. Consider increasing your provisioning level for the under-provisioned global secondary indexes with the UpdateTable API.
    
    This message is returned when provisioned throughput is exceeded is on a provisioned GSI.
    
    Throttling Error:
    
    Code: ThrottlingError
    
    Messages:
    
    Throughput exceeds the current capacity of your table or index. DynamoDB is automatically scaling your table or index so please try again shortly. If exceptions persist, check if you have a hot key: https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/bp-partition-key-design.html.
    
    This message is returned when writes get throttled on an On-Demand table as DynamoDB is automatically scaling the table.
    
    Throughput exceeds the current capacity for one or more global secondary indexes. DynamoDB is automatically scaling your index so please try again shortly.
    
    This message is returned when when writes get throttled on an On-Demand GSI as DynamoDB is automatically scaling the GSI.
    
    Validation Error:
    
    Code: ValidationError
    
    Messages:
    
    One or more parameter values were invalid.
    
    The update expression attempted to update the secondary index key beyond allowed size limits.
    
    The update expression attempted to update the secondary index key to unsupported type.
    
    An operand in the update expression has an incorrect data type.
    
    Item size to update has exceeded the maximum allowed size.
    
    Number overflow. Attempting to store a number with magnitude larger than supported range.
    
    Type mismatch for attribute to update.
    
    Nesting Levels have exceeded supported limits.
    
    The document path provided in the update expression is invalid for update.
    
    The provided expression refers to an attribute that does not exist in the item.
    TransactionInProgressException - The transaction with the given request token is already in progress.
    
    IdempotentParameterMismatchException - DynamoDB rejected the request because you retried a request with a different payload but with an idempotent token that was already used.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - executeTransaction
```
default ExecuteTransactionResponse executeTransaction(Consumer<ExecuteTransactionRequest.Builder> executeTransactionRequest)
                                               throws ResourceNotFoundException,
                                                      TransactionCanceledException,
                                                      TransactionInProgressException,
                                                      IdempotentParameterMismatchException,
                                                      ProvisionedThroughputExceededException,
                                                      RequestLimitExceededException,
                                                      InternalServerErrorException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      DynamoDbException
```
    This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
    
    The entire transaction must consist of either read statements or write statements, you cannot mix both in one transaction. The EXISTS function is an exception and can be used to check the condition of specific attributes of the item in a similar manner to ConditionCheck in the TransactWriteItems API.
    
    This is a convenience which creates an instance of the ExecuteTransactionRequest.Builder avoiding the need to create one manually via ExecuteTransactionRequest.builder()
    Parameters:
    
    executeTransactionRequest - A Consumer that will call methods on ExecuteTransactionInput.Builder to create a request.
    
    Returns:
    
    Result of the ExecuteTransaction operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    TransactionCanceledException - The entire transaction request was canceled.
    
    DynamoDB cancels a TransactWriteItems request under the following circumstances:
    
    A condition in one of the condition expressions is not met.
    
    A table in the TransactWriteItems request is in a different account or region.
    
    More than one action in the TransactWriteItems operation targets the same item.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    An item size becomes too large (larger than 400 KB), or a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    
    There is a user error, such as an invalid data format.
    
    DynamoDB cancels a TransactGetItems request under the following circumstances:
    
    There is an ongoing TransactGetItems operation that conflicts with a concurrent PutItem, UpdateItem, DeleteItem or TransactWriteItems request. In this case the TransactGetItems operation fails with a TransactionCanceledException.
    
    A table in the TransactGetItems request is in a different account or region.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    There is a user error, such as an invalid data format.
    
    If using Java, DynamoDB lists the cancellation reasons on the CancellationReasons property. This property is not set for other languages. Transaction cancellation reasons are ordered in the order of requested items, if an item has no error it will have None code and Null message.
    
    Cancellation reason codes and possible error messages:
    
    No Errors:
    
    Code: None
    
    Message: null
    
    Conditional Check Failed:
    
    Code: ConditionalCheckFailed
    
    Message: The conditional request failed.
    
    Item Collection Size Limit Exceeded:
    
    Code: ItemCollectionSizeLimitExceeded
    
    Message: Collection size exceeded.
    
    Transaction Conflict:
    
    Code: TransactionConflict
    
    Message: Transaction is ongoing for the item.
    
    Provisioned Throughput Exceeded:
    
    Code: ProvisionedThroughputExceeded
    
    Messages:
    
    The level of configured provisioned throughput for the table was exceeded. Consider increasing your provisioning level with the UpdateTable API.
    
    This Message is received when provisioned throughput is exceeded is on a provisioned DynamoDB table.
    
    The level of configured provisioned throughput for one or more global secondary indexes of the table was exceeded. Consider increasing your provisioning level for the under-provisioned global secondary indexes with the UpdateTable API.
    
    This message is returned when provisioned throughput is exceeded is on a provisioned GSI.
    
    Throttling Error:
    
    Code: ThrottlingError
    
    Messages:
    
    Throughput exceeds the current capacity of your table or index. DynamoDB is automatically scaling your table or index so please try again shortly. If exceptions persist, check if you have a hot key: https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/bp-partition-key-design.html.
    
    This message is returned when writes get throttled on an On-Demand table as DynamoDB is automatically scaling the table.
    
    Throughput exceeds the current capacity for one or more global secondary indexes. DynamoDB is automatically scaling your index so please try again shortly.
    
    This message is returned when when writes get throttled on an On-Demand GSI as DynamoDB is automatically scaling the GSI.
    
    Validation Error:
    
    Code: ValidationError
    
    Messages:
    
    One or more parameter values were invalid.
    
    The update expression attempted to update the secondary index key beyond allowed size limits.
    
    The update expression attempted to update the secondary index key to unsupported type.
    
    An operand in the update expression has an incorrect data type.
    
    Item size to update has exceeded the maximum allowed size.
    
    Number overflow. Attempting to store a number with magnitude larger than supported range.
    
    Type mismatch for attribute to update.
    
    Nesting Levels have exceeded supported limits.
    
    The document path provided in the update expression is invalid for update.
    
    The provided expression refers to an attribute that does not exist in the item.
    TransactionInProgressException - The transaction with the given request token is already in progress.
    
    IdempotentParameterMismatchException - DynamoDB rejected the request because you retried a request with a different payload but with an idempotent token that was already used.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - exportTableToPointInTime
```
default ExportTableToPointInTimeResponse exportTableToPointInTime(ExportTableToPointInTimeRequest exportTableToPointInTimeRequest)
                                                           throws TableNotFoundException,
                                                                  PointInTimeRecoveryUnavailableException,
                                                                  LimitExceededException,
                                                                  InvalidExportTimeException,
                                                                  ExportConflictException,
                                                                  InternalServerErrorException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  DynamoDbException
```
    Exports table data to an S3 bucket. The table must have point in time recovery enabled, and you can export data from any time within the point in time recovery window.
    
    Parameters:
    
    exportTableToPointInTimeRequest -
    
    Returns:
    
    Result of the ExportTableToPointInTime operation returned by the service.
    
    Throws:
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    PointInTimeRecoveryUnavailableException - Point in time recovery has not yet been enabled for this source table.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InvalidExportTimeException - The specified ExportTime is outside of the point in time recovery window.
    
    ExportConflictException - There was a conflict when writing to the specified S3 bucket.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - exportTableToPointInTime
```
default ExportTableToPointInTimeResponse exportTableToPointInTime(Consumer<ExportTableToPointInTimeRequest.Builder> exportTableToPointInTimeRequest)
                                                           throws TableNotFoundException,
                                                                  PointInTimeRecoveryUnavailableException,
                                                                  LimitExceededException,
                                                                  InvalidExportTimeException,
                                                                  ExportConflictException,
                                                                  InternalServerErrorException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  DynamoDbException
```
    Exports table data to an S3 bucket. The table must have point in time recovery enabled, and you can export data from any time within the point in time recovery window.
    
    This is a convenience which creates an instance of the ExportTableToPointInTimeRequest.Builder avoiding the need to create one manually via ExportTableToPointInTimeRequest.builder()
    
    Parameters:
    
    exportTableToPointInTimeRequest - A Consumer that will call methods on ExportTableToPointInTimeInput.Builder to create a request.
    
    Returns:
    
    Result of the ExportTableToPointInTime operation returned by the service.
    
    Throws:
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    PointInTimeRecoveryUnavailableException - Point in time recovery has not yet been enabled for this source table.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InvalidExportTimeException - The specified ExportTime is outside of the point in time recovery window.
    
    ExportConflictException - There was a conflict when writing to the specified S3 bucket.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getItem
```
default GetItemResponse getItem(GetItemRequest getItemRequest)
                         throws ProvisionedThroughputExceededException,
                                ResourceNotFoundException,
                                RequestLimitExceededException,
                                InternalServerErrorException,
                                AwsServiceException,
                                SdkClientException,
                                DynamoDbException
```
    The GetItem operation returns a set of attributes for the item with the given primary key. If there is no matching item, GetItem does not return any data and there will be no Item element in the response.
    
    GetItem provides an eventually consistent read by default. If your application requires a strongly consistent read, set ConsistentRead to true. Although a strongly consistent read might take more time than an eventually consistent read, it always returns the last updated value.
    
    Parameters:
    
    getItemRequest - Represents the input of a GetItem operation.
    
    Returns:
    
    Result of the GetItem operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getItem
```
default GetItemResponse getItem(Consumer<GetItemRequest.Builder> getItemRequest)
                         throws ProvisionedThroughputExceededException,
                                ResourceNotFoundException,
                                RequestLimitExceededException,
                                InternalServerErrorException,
                                AwsServiceException,
                                SdkClientException,
                                DynamoDbException
```
    The GetItem operation returns a set of attributes for the item with the given primary key. If there is no matching item, GetItem does not return any data and there will be no Item element in the response.
    
    GetItem provides an eventually consistent read by default. If your application requires a strongly consistent read, set ConsistentRead to true. Although a strongly consistent read might take more time than an eventually consistent read, it always returns the last updated value.
    
    This is a convenience which creates an instance of the GetItemRequest.Builder avoiding the need to create one manually via GetItemRequest.builder()
    
    Parameters:
    
    getItemRequest - A Consumer that will call methods on GetItemInput.Builder to create a request. Represents the input of a GetItem operation.
    
    Returns:
    
    Result of the GetItem operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - importTable
```
default ImportTableResponse importTable(ImportTableRequest importTableRequest)
                                 throws ResourceInUseException,
                                        LimitExceededException,
                                        ImportConflictException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Imports table data from an S3 bucket.
    
    Parameters:
    
    importTableRequest -
    
    Returns:
    
    Result of the ImportTable operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ImportConflictException - There was a conflict when importing from the specified S3 source. This can occur when the current import conflicts with a previous import request that had the same client token.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - importTable
```
default ImportTableResponse importTable(Consumer<ImportTableRequest.Builder> importTableRequest)
                                 throws ResourceInUseException,
                                        LimitExceededException,
                                        ImportConflictException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Imports table data from an S3 bucket.
    
    This is a convenience which creates an instance of the ImportTableRequest.Builder avoiding the need to create one manually via ImportTableRequest.builder()
    
    Parameters:
    
    importTableRequest - A Consumer that will call methods on ImportTableInput.Builder to create a request.
    
    Returns:
    
    Result of the ImportTable operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ImportConflictException - There was a conflict when importing from the specified S3 source. This can occur when the current import conflicts with a previous import request that had the same client token.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listBackups
```
default ListBackupsResponse listBackups()
                                 throws InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    List backups associated with an Amazon Web Services account. To list backups for a given table, specify TableName. ListBackups returns a paginated list of results with at most 1 MB worth of items in a page. You can also specify a maximum number of entries to be returned in a page.
    
    In the request, start time is inclusive, but end time is exclusive. Note that these boundaries are for the time at which the original backup was requested.
    
    You can call ListBackups a maximum of five times per second.
    
    Returns:
    
    Result of the ListBackups operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listBackups(ListBackupsRequest), AWS API Documentation
  - listBackups
```
default ListBackupsResponse listBackups(ListBackupsRequest listBackupsRequest)
                                 throws InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    List backups associated with an Amazon Web Services account. To list backups for a given table, specify TableName. ListBackups returns a paginated list of results with at most 1 MB worth of items in a page. You can also specify a maximum number of entries to be returned in a page.
    
    In the request, start time is inclusive, but end time is exclusive. Note that these boundaries are for the time at which the original backup was requested.
    
    You can call ListBackups a maximum of five times per second.
    
    Parameters:
    
    listBackupsRequest -
    
    Returns:
    
    Result of the ListBackups operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listBackups
```
default ListBackupsResponse listBackups(Consumer<ListBackupsRequest.Builder> listBackupsRequest)
                                 throws InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    List backups associated with an Amazon Web Services account. To list backups for a given table, specify TableName. ListBackups returns a paginated list of results with at most 1 MB worth of items in a page. You can also specify a maximum number of entries to be returned in a page.
    
    In the request, start time is inclusive, but end time is exclusive. Note that these boundaries are for the time at which the original backup was requested.
    
    You can call ListBackups a maximum of five times per second.
    
    This is a convenience which creates an instance of the ListBackupsRequest.Builder avoiding the need to create one manually via ListBackupsRequest.builder()
    
    Parameters:
    
    listBackupsRequest - A Consumer that will call methods on ListBackupsInput.Builder to create a request.
    
    Returns:
    
    Result of the ListBackups operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listContributorInsights
```
default ListContributorInsightsResponse listContributorInsights(ListContributorInsightsRequest listContributorInsightsRequest)
                                                         throws ResourceNotFoundException,
                                                                InternalServerErrorException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                DynamoDbException
```
    Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
    
    Parameters:
    
    listContributorInsightsRequest -
    
    Returns:
    
    Result of the ListContributorInsights operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listContributorInsights
```
default ListContributorInsightsResponse listContributorInsights(Consumer<ListContributorInsightsRequest.Builder> listContributorInsightsRequest)
                                                         throws ResourceNotFoundException,
                                                                InternalServerErrorException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                DynamoDbException
```
    Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
    
    This is a convenience which creates an instance of the ListContributorInsightsRequest.Builder avoiding the need to create one manually via ListContributorInsightsRequest.builder()
    
    Parameters:
    
    listContributorInsightsRequest - A Consumer that will call methods on ListContributorInsightsInput.Builder to create a request.
    
    Returns:
    
    Result of the ListContributorInsights operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listContributorInsightsPaginator
```
default ListContributorInsightsIterable listContributorInsightsPaginator(ListContributorInsightsRequest listContributorInsightsRequest)
                                                                  throws ResourceNotFoundException,
                                                                         InternalServerErrorException,
                                                                         AwsServiceException,
                                                                         SdkClientException,
                                                                         DynamoDbException
```
    Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
    
    This is a variant of listContributorInsights(software.amazon.awssdk.services.dynamodb.model.ListContributorInsightsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListContributorInsightsIterable responses = client.listContributorInsightsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListContributorInsightsIterable responses = client
             .listContributorInsightsPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListContributorInsightsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListContributorInsightsIterable responses = client.listContributorInsightsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listContributorInsights(software.amazon.awssdk.services.dynamodb.model.ListContributorInsightsRequest) operation.
    Parameters:
    
    listContributorInsightsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listContributorInsightsPaginator
```
default ListContributorInsightsIterable listContributorInsightsPaginator(Consumer<ListContributorInsightsRequest.Builder> listContributorInsightsRequest)
                                                                  throws ResourceNotFoundException,
                                                                         InternalServerErrorException,
                                                                         AwsServiceException,
                                                                         SdkClientException,
                                                                         DynamoDbException
```
    Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.
    
    This is a variant of listContributorInsights(software.amazon.awssdk.services.dynamodb.model.ListContributorInsightsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListContributorInsightsIterable responses = client.listContributorInsightsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListContributorInsightsIterable responses = client
             .listContributorInsightsPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListContributorInsightsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListContributorInsightsIterable responses = client.listContributorInsightsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listContributorInsights(software.amazon.awssdk.services.dynamodb.model.ListContributorInsightsRequest) operation.
    
    This is a convenience which creates an instance of the ListContributorInsightsRequest.Builder avoiding the need to create one manually via ListContributorInsightsRequest.builder()
    Parameters:
    
    listContributorInsightsRequest - A Consumer that will call methods on ListContributorInsightsInput.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listExports
```
default ListExportsResponse listExports(ListExportsRequest listExportsRequest)
                                 throws LimitExceededException,
                                        InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Lists completed exports within the past 90 days.
    
    Parameters:
    
    listExportsRequest -
    
    Returns:
    
    Result of the ListExports operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listExports
```
default ListExportsResponse listExports(Consumer<ListExportsRequest.Builder> listExportsRequest)
                                 throws LimitExceededException,
                                        InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Lists completed exports within the past 90 days.
    
    This is a convenience which creates an instance of the ListExportsRequest.Builder avoiding the need to create one manually via ListExportsRequest.builder()
    
    Parameters:
    
    listExportsRequest - A Consumer that will call methods on ListExportsInput.Builder to create a request.
    
    Returns:
    
    Result of the ListExports operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listExportsPaginator
```
default ListExportsIterable listExportsPaginator(ListExportsRequest listExportsRequest)
                                          throws LimitExceededException,
                                                 InternalServerErrorException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 DynamoDbException
```
    Lists completed exports within the past 90 days.
    
    This is a variant of listExports(software.amazon.awssdk.services.dynamodb.model.ListExportsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListExportsIterable responses = client.listExportsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListExportsIterable responses = client.listExportsPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListExportsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListExportsIterable responses = client.listExportsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listExports(software.amazon.awssdk.services.dynamodb.model.ListExportsRequest) operation.
    Parameters:
    
    listExportsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listExportsPaginator
```
default ListExportsIterable listExportsPaginator(Consumer<ListExportsRequest.Builder> listExportsRequest)
                                          throws LimitExceededException,
                                                 InternalServerErrorException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 DynamoDbException
```
    Lists completed exports within the past 90 days.
    
    This is a variant of listExports(software.amazon.awssdk.services.dynamodb.model.ListExportsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListExportsIterable responses = client.listExportsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListExportsIterable responses = client.listExportsPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListExportsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListExportsIterable responses = client.listExportsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listExports(software.amazon.awssdk.services.dynamodb.model.ListExportsRequest) operation.
    
    This is a convenience which creates an instance of the ListExportsRequest.Builder avoiding the need to create one manually via ListExportsRequest.builder()
    Parameters:
    
    listExportsRequest - A Consumer that will call methods on ListExportsInput.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listGlobalTables
```
default ListGlobalTablesResponse listGlobalTables()
                                           throws InternalServerErrorException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    Lists all global tables that have a replica in the specified Region.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    Returns:
    
    Result of the ListGlobalTables operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listGlobalTables(ListGlobalTablesRequest), AWS API Documentation
  - listGlobalTables
```
default ListGlobalTablesResponse listGlobalTables(ListGlobalTablesRequest listGlobalTablesRequest)
                                           throws InternalServerErrorException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    Lists all global tables that have a replica in the specified Region.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    Parameters:
    
    listGlobalTablesRequest -
    
    Returns:
    
    Result of the ListGlobalTables operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listGlobalTables
```
default ListGlobalTablesResponse listGlobalTables(Consumer<ListGlobalTablesRequest.Builder> listGlobalTablesRequest)
                                           throws InternalServerErrorException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    Lists all global tables that have a replica in the specified Region.
    
    This operation only applies to Version 2017.11.29 of global tables.
    
    This is a convenience which creates an instance of the ListGlobalTablesRequest.Builder avoiding the need to create one manually via ListGlobalTablesRequest.builder()
    
    Parameters:
    
    listGlobalTablesRequest - A Consumer that will call methods on ListGlobalTablesInput.Builder to create a request.
    
    Returns:
    
    Result of the ListGlobalTables operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listImports
```
default ListImportsResponse listImports(ListImportsRequest listImportsRequest)
                                 throws LimitExceededException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Lists completed imports within the past 90 days.
    
    Parameters:
    
    listImportsRequest -
    
    Returns:
    
    Result of the ListImports operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listImports
```
default ListImportsResponse listImports(Consumer<ListImportsRequest.Builder> listImportsRequest)
                                 throws LimitExceededException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Lists completed imports within the past 90 days.
    
    This is a convenience which creates an instance of the ListImportsRequest.Builder avoiding the need to create one manually via ListImportsRequest.builder()
    
    Parameters:
    
    listImportsRequest - A Consumer that will call methods on ListImportsInput.Builder to create a request.
    
    Returns:
    
    Result of the ListImports operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listImportsPaginator
```
default ListImportsIterable listImportsPaginator(ListImportsRequest listImportsRequest)
                                          throws LimitExceededException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 DynamoDbException
```
    Lists completed imports within the past 90 days.
    
    This is a variant of listImports(software.amazon.awssdk.services.dynamodb.model.ListImportsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListImportsIterable responses = client.listImportsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListImportsIterable responses = client.listImportsPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListImportsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListImportsIterable responses = client.listImportsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listImports(software.amazon.awssdk.services.dynamodb.model.ListImportsRequest) operation.
    Parameters:
    
    listImportsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listImportsPaginator
```
default ListImportsIterable listImportsPaginator(Consumer<ListImportsRequest.Builder> listImportsRequest)
                                          throws LimitExceededException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 DynamoDbException
```
    Lists completed imports within the past 90 days.
    
    This is a variant of listImports(software.amazon.awssdk.services.dynamodb.model.ListImportsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListImportsIterable responses = client.listImportsPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListImportsIterable responses = client.listImportsPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListImportsResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListImportsIterable responses = client.listImportsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listImports(software.amazon.awssdk.services.dynamodb.model.ListImportsRequest) operation.
    
    This is a convenience which creates an instance of the ListImportsRequest.Builder avoiding the need to create one manually via ListImportsRequest.builder()
    Parameters:
    
    listImportsRequest - A Consumer that will call methods on ListImportsInput.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTables
```
default ListTablesResponse listTables()
                               throws InternalServerErrorException,
                                      AwsServiceException,
                                      SdkClientException,
                                      DynamoDbException
```
    Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
    
    Returns:
    
    Result of the ListTables operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listTables(ListTablesRequest), AWS API Documentation
  - listTables
```
default ListTablesResponse listTables(ListTablesRequest listTablesRequest)
                               throws InternalServerErrorException,
                                      AwsServiceException,
                                      SdkClientException,
                                      DynamoDbException
```
    Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
    
    Parameters:
    
    listTablesRequest - Represents the input of a ListTables operation.
    
    Returns:
    
    Result of the ListTables operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTables
```
default ListTablesResponse listTables(Consumer<ListTablesRequest.Builder> listTablesRequest)
                               throws InternalServerErrorException,
                                      AwsServiceException,
                                      SdkClientException,
                                      DynamoDbException
```
    Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
    
    This is a convenience which creates an instance of the ListTablesRequest.Builder avoiding the need to create one manually via ListTablesRequest.builder()
    
    Parameters:
    
    listTablesRequest - A Consumer that will call methods on ListTablesInput.Builder to create a request. Represents the input of a ListTables operation.
    
    Returns:
    
    Result of the ListTables operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTablesPaginator
```
default ListTablesIterable listTablesPaginator()
                                        throws InternalServerErrorException,
                                               AwsServiceException,
                                               SdkClientException,
                                               DynamoDbException
```
    Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
    
    This is a variant of listTables(software.amazon.awssdk.services.dynamodb.model.ListTablesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListTablesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of Limit won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTables(software.amazon.awssdk.services.dynamodb.model.ListTablesRequest) operation.
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    listTablesPaginator(ListTablesRequest), AWS API Documentation
  - listTablesPaginator
```
default ListTablesIterable listTablesPaginator(ListTablesRequest listTablesRequest)
                                        throws InternalServerErrorException,
                                               AwsServiceException,
                                               SdkClientException,
                                               DynamoDbException
```
    Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
    
    This is a variant of listTables(software.amazon.awssdk.services.dynamodb.model.ListTablesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListTablesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of Limit won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTables(software.amazon.awssdk.services.dynamodb.model.ListTablesRequest) operation.
    Parameters:
    
    listTablesRequest - Represents the input of a ListTables operation.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTablesPaginator
```
default ListTablesIterable listTablesPaginator(Consumer<ListTablesRequest.Builder> listTablesRequest)
                                        throws InternalServerErrorException,
                                               AwsServiceException,
                                               SdkClientException,
                                               DynamoDbException
```
    Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
    
    This is a variant of listTables(software.amazon.awssdk.services.dynamodb.model.ListTablesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ListTablesResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ListTablesIterable responses = client.listTablesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of Limit won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTables(software.amazon.awssdk.services.dynamodb.model.ListTablesRequest) operation.
    
    This is a convenience which creates an instance of the ListTablesRequest.Builder avoiding the need to create one manually via ListTablesRequest.builder()
    Parameters:
    
    listTablesRequest - A Consumer that will call methods on ListTablesInput.Builder to create a request. Represents the input of a ListTables operation.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsOfResource
```
default ListTagsOfResourceResponse listTagsOfResource(ListTagsOfResourceRequest listTagsOfResourceRequest)
                                               throws ResourceNotFoundException,
                                                      InternalServerErrorException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      DynamoDbException
```
    List all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up to 10 times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Parameters:
    
    listTagsOfResourceRequest -
    
    Returns:
    
    Result of the ListTagsOfResource operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsOfResource
```
default ListTagsOfResourceResponse listTagsOfResource(Consumer<ListTagsOfResourceRequest.Builder> listTagsOfResourceRequest)
                                               throws ResourceNotFoundException,
                                                      InternalServerErrorException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      DynamoDbException
```
    List all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up to 10 times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    This is a convenience which creates an instance of the ListTagsOfResourceRequest.Builder avoiding the need to create one manually via ListTagsOfResourceRequest.builder()
    
    Parameters:
    
    listTagsOfResourceRequest - A Consumer that will call methods on ListTagsOfResourceInput.Builder to create a request.
    
    Returns:
    
    Result of the ListTagsOfResource operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - putItem
```
default PutItemResponse putItem(PutItemRequest putItemRequest)
                         throws ConditionalCheckFailedException,
                                ProvisionedThroughputExceededException,
                                ResourceNotFoundException,
                                ItemCollectionSizeLimitExceededException,
                                TransactionConflictException,
                                RequestLimitExceededException,
                                InternalServerErrorException,
                                AwsServiceException,
                                SdkClientException,
                                DynamoDbException
```
    Creates a new item, or replaces an old item with a new item. If an item that has the same primary key as the new item already exists in the specified table, the new item completely replaces the existing item. You can perform a conditional put operation (add a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values. You can return the item's attribute values in the same operation, using the ReturnValues parameter.
    
    When you add an item, the primary key attributes are the only required attributes.
    
    Empty String and Binary attribute values are allowed. Attribute values of type String and Binary must have a length greater than zero if the attribute is used as a key attribute for a table or index. Set type attributes cannot be empty.
    
    Invalid Requests with empty values will be rejected with a ValidationException exception.
    
    To prevent a new item from replacing an existing item, use a conditional expression that contains the attribute_not_exists function with the name of the attribute being used as the partition key for the table. Since every record must contain that attribute, the attribute_not_exists function will only succeed if no matching item exists.
    
    For more information about PutItem, see Working with Items in the Amazon DynamoDB Developer Guide.
    
    Parameters:
    
    putItemRequest - Represents the input of a PutItem operation.
    
    Returns:
    
    Result of the PutItem operation returned by the service.
    
    Throws:
    
    ConditionalCheckFailedException - A condition specified in the operation could not be evaluated.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    TransactionConflictException - Operation was rejected because there is an ongoing transaction for the item.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - putItem
```
default PutItemResponse putItem(Consumer<PutItemRequest.Builder> putItemRequest)
                         throws ConditionalCheckFailedException,
                                ProvisionedThroughputExceededException,
                                ResourceNotFoundException,
                                ItemCollectionSizeLimitExceededException,
                                TransactionConflictException,
                                RequestLimitExceededException,
                                InternalServerErrorException,
                                AwsServiceException,
                                SdkClientException,
                                DynamoDbException
```
    Creates a new item, or replaces an old item with a new item. If an item that has the same primary key as the new item already exists in the specified table, the new item completely replaces the existing item. You can perform a conditional put operation (add a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values. You can return the item's attribute values in the same operation, using the ReturnValues parameter.
    
    When you add an item, the primary key attributes are the only required attributes.
    
    Empty String and Binary attribute values are allowed. Attribute values of type String and Binary must have a length greater than zero if the attribute is used as a key attribute for a table or index. Set type attributes cannot be empty.
    
    Invalid Requests with empty values will be rejected with a ValidationException exception.
    
    To prevent a new item from replacing an existing item, use a conditional expression that contains the attribute_not_exists function with the name of the attribute being used as the partition key for the table. Since every record must contain that attribute, the attribute_not_exists function will only succeed if no matching item exists.
    
    For more information about PutItem, see Working with Items in the Amazon DynamoDB Developer Guide.
    
    This is a convenience which creates an instance of the PutItemRequest.Builder avoiding the need to create one manually via PutItemRequest.builder()
    
    Parameters:
    
    putItemRequest - A Consumer that will call methods on PutItemInput.Builder to create a request. Represents the input of a PutItem operation.
    
    Returns:
    
    Result of the PutItem operation returned by the service.
    
    Throws:
    
    ConditionalCheckFailedException - A condition specified in the operation could not be evaluated.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    TransactionConflictException - Operation was rejected because there is an ongoing transaction for the item.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - query
```
default QueryResponse query(QueryRequest queryRequest)
                     throws ProvisionedThroughputExceededException,
                            ResourceNotFoundException,
                            RequestLimitExceededException,
                            InternalServerErrorException,
                            AwsServiceException,
                            SdkClientException,
                            DynamoDbException
```
    You must provide the name of the partition key attribute and a single value for that attribute. Query returns all items with that partition key value. Optionally, you can provide a sort key attribute and use a comparison operator to refine the search results.
    
    Use the KeyConditionExpression parameter to provide a specific value for the partition key. The Query operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the Query operation by specifying a sort key value and a comparison operator in KeyConditionExpression. To further refine the Query results, you can optionally provide a FilterExpression. A FilterExpression determines which items within the results should be returned to you. All of the other results are discarded.
    
    A Query operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation.
    
    DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a FilterExpression.
    
    Query results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the ScanIndexForward parameter to false.
    
    A single Query operation will read up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you will need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    FilterExpression is applied after a Query finishes, but before the results are returned. A FilterExpression cannot contain partition key or sort key attributes. You need to specify those attributes in the KeyConditionExpression.
    
    A Query operation can return an empty result set and a LastEvaluatedKey if all the items read for the page of results are filtered out.
    
    You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the ConsistentRead parameter to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.
    
    Parameters:
    
    queryRequest - Represents the input of a Query operation.
    
    Returns:
    
    Result of the Query operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - query
```
default QueryResponse query(Consumer<QueryRequest.Builder> queryRequest)
                     throws ProvisionedThroughputExceededException,
                            ResourceNotFoundException,
                            RequestLimitExceededException,
                            InternalServerErrorException,
                            AwsServiceException,
                            SdkClientException,
                            DynamoDbException
```
    You must provide the name of the partition key attribute and a single value for that attribute. Query returns all items with that partition key value. Optionally, you can provide a sort key attribute and use a comparison operator to refine the search results.
    
    Use the KeyConditionExpression parameter to provide a specific value for the partition key. The Query operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the Query operation by specifying a sort key value and a comparison operator in KeyConditionExpression. To further refine the Query results, you can optionally provide a FilterExpression. A FilterExpression determines which items within the results should be returned to you. All of the other results are discarded.
    
    A Query operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation.
    
    DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a FilterExpression.
    
    Query results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the ScanIndexForward parameter to false.
    
    A single Query operation will read up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you will need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    FilterExpression is applied after a Query finishes, but before the results are returned. A FilterExpression cannot contain partition key or sort key attributes. You need to specify those attributes in the KeyConditionExpression.
    
    A Query operation can return an empty result set and a LastEvaluatedKey if all the items read for the page of results are filtered out.
    
    You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the ConsistentRead parameter to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.
    
    This is a convenience which creates an instance of the QueryRequest.Builder avoiding the need to create one manually via QueryRequest.builder()
    
    Parameters:
    
    queryRequest - A Consumer that will call methods on QueryInput.Builder to create a request. Represents the input of a Query operation.
    
    Returns:
    
    Result of the Query operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - queryPaginator
```
default QueryIterable queryPaginator(QueryRequest queryRequest)
                              throws ProvisionedThroughputExceededException,
                                     ResourceNotFoundException,
                                     RequestLimitExceededException,
                                     InternalServerErrorException,
                                     AwsServiceException,
                                     SdkClientException,
                                     DynamoDbException
```
    You must provide the name of the partition key attribute and a single value for that attribute. Query returns all items with that partition key value. Optionally, you can provide a sort key attribute and use a comparison operator to refine the search results.
    
    Use the KeyConditionExpression parameter to provide a specific value for the partition key. The Query operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the Query operation by specifying a sort key value and a comparison operator in KeyConditionExpression. To further refine the Query results, you can optionally provide a FilterExpression. A FilterExpression determines which items within the results should be returned to you. All of the other results are discarded.
    
    A Query operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation.
    
    DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a FilterExpression.
    
    Query results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the ScanIndexForward parameter to false.
    
    A single Query operation will read up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you will need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    FilterExpression is applied after a Query finishes, but before the results are returned. A FilterExpression cannot contain partition key or sort key attributes. You need to specify those attributes in the KeyConditionExpression.
    
    A Query operation can return an empty result set and a LastEvaluatedKey if all the items read for the page of results are filtered out.
    
    You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the ConsistentRead parameter to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.
    
    This is a variant of query(software.amazon.awssdk.services.dynamodb.model.QueryRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.QueryIterable responses = client.queryPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.QueryIterable responses = client.queryPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.QueryResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.QueryIterable responses = client.queryPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of Limit won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the query(software.amazon.awssdk.services.dynamodb.model.QueryRequest) operation.
    Parameters:
    
    queryRequest - Represents the input of a Query operation.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - queryPaginator
```
default QueryIterable queryPaginator(Consumer<QueryRequest.Builder> queryRequest)
                              throws ProvisionedThroughputExceededException,
                                     ResourceNotFoundException,
                                     RequestLimitExceededException,
                                     InternalServerErrorException,
                                     AwsServiceException,
                                     SdkClientException,
                                     DynamoDbException
```
    You must provide the name of the partition key attribute and a single value for that attribute. Query returns all items with that partition key value. Optionally, you can provide a sort key attribute and use a comparison operator to refine the search results.
    
    Use the KeyConditionExpression parameter to provide a specific value for the partition key. The Query operation will return all of the items from the table or index with that partition key value. You can optionally narrow the scope of the Query operation by specifying a sort key value and a comparison operator in KeyConditionExpression. To further refine the Query results, you can optionally provide a FilterExpression. A FilterExpression determines which items within the results should be returned to you. All of the other results are discarded.
    
    A Query operation always returns a result set. If no matching items are found, the result set will be empty. Queries that do not return results consume the minimum number of read capacity units for that type of read operation.
    
    DynamoDB calculates the number of read capacity units consumed based on item size, not on the amount of data that is returned to an application. The number of capacity units consumed will be the same whether you request all of the attributes (the default behavior) or just some of them (using a projection expression). The number will also be the same whether or not you use a FilterExpression.
    
    Query results are always sorted by the sort key value. If the data type of the sort key is Number, the results are returned in numeric order; otherwise, the results are returned in order of UTF-8 bytes. By default, the sort order is ascending. To reverse the order, set the ScanIndexForward parameter to false.
    
    A single Query operation will read up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you will need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    FilterExpression is applied after a Query finishes, but before the results are returned. A FilterExpression cannot contain partition key or sort key attributes. You need to specify those attributes in the KeyConditionExpression.
    
    A Query operation can return an empty result set and a LastEvaluatedKey if all the items read for the page of results are filtered out.
    
    You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set the ConsistentRead parameter to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.
    
    This is a variant of query(software.amazon.awssdk.services.dynamodb.model.QueryRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.QueryIterable responses = client.queryPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.QueryIterable responses = client.queryPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.QueryResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.QueryIterable responses = client.queryPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of Limit won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the query(software.amazon.awssdk.services.dynamodb.model.QueryRequest) operation.
    
    This is a convenience which creates an instance of the QueryRequest.Builder avoiding the need to create one manually via QueryRequest.builder()
    Parameters:
    
    queryRequest - A Consumer that will call methods on QueryInput.Builder to create a request. Represents the input of a Query operation.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - restoreTableFromBackup
```
default RestoreTableFromBackupResponse restoreTableFromBackup(RestoreTableFromBackupRequest restoreTableFromBackupRequest)
                                                       throws TableAlreadyExistsException,
                                                              TableInUseException,
                                                              BackupNotFoundException,
                                                              BackupInUseException,
                                                              LimitExceededException,
                                                              InternalServerErrorException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              DynamoDbException
```
    Creates a new table from an existing backup. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account.
    
    You can call RestoreTableFromBackup at a maximum rate of 10 times per second.
    
    You must manually set up the following on the restored table:
    - Auto scaling policies
    - IAM policies
    - Amazon CloudWatch metrics and alarms
    - Tags
    - Stream settings
    - Time to Live (TTL) settings
    Parameters:
    
    restoreTableFromBackupRequest -
    
    Returns:
    
    Result of the RestoreTableFromBackup operation returned by the service.
    
    Throws:
    
    TableAlreadyExistsException - A target table with the specified name already exists.
    
    TableInUseException - A target table with the specified name is either being created or deleted.
    
    BackupNotFoundException - Backup not found for the given BackupARN.
    
    BackupInUseException - There is another ongoing conflicting backup control plane operation on the table. The backup is either being created, deleted or restored to a table.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - restoreTableFromBackup
```
default RestoreTableFromBackupResponse restoreTableFromBackup(Consumer<RestoreTableFromBackupRequest.Builder> restoreTableFromBackupRequest)
                                                       throws TableAlreadyExistsException,
                                                              TableInUseException,
                                                              BackupNotFoundException,
                                                              BackupInUseException,
                                                              LimitExceededException,
                                                              InternalServerErrorException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              DynamoDbException
```
    Creates a new table from an existing backup. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account.
    
    You can call RestoreTableFromBackup at a maximum rate of 10 times per second.
    
    You must manually set up the following on the restored table:
    - Auto scaling policies
    - IAM policies
    - Amazon CloudWatch metrics and alarms
    - Tags
    - Stream settings
    - Time to Live (TTL) settings
    This is a convenience which creates an instance of the RestoreTableFromBackupRequest.Builder avoiding the need to create one manually via RestoreTableFromBackupRequest.builder()
    Parameters:
    
    restoreTableFromBackupRequest - A Consumer that will call methods on RestoreTableFromBackupInput.Builder to create a request.
    
    Returns:
    
    Result of the RestoreTableFromBackup operation returned by the service.
    
    Throws:
    
    TableAlreadyExistsException - A target table with the specified name already exists.
    
    TableInUseException - A target table with the specified name is either being created or deleted.
    
    BackupNotFoundException - Backup not found for the given BackupARN.
    
    BackupInUseException - There is another ongoing conflicting backup control plane operation on the table. The backup is either being created, deleted or restored to a table.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - restoreTableToPointInTime
```
default RestoreTableToPointInTimeResponse restoreTableToPointInTime(RestoreTableToPointInTimeRequest restoreTableToPointInTimeRequest)
                                                             throws TableAlreadyExistsException,
                                                                    TableNotFoundException,
                                                                    TableInUseException,
                                                                    LimitExceededException,
                                                                    InvalidRestoreTimeException,
                                                                    PointInTimeRecoveryUnavailableException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    DynamoDbException
```
    Restores the specified table to the specified point in time within EarliestRestorableDateTime and LatestRestorableDateTime. You can restore your table to any point in time during the last 35 days. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account.
    
    When you restore using point in time recovery, DynamoDB restores your table data to the state based on the selected date and time (day:hour:minute:second) to a new table.
    
    Along with data, the following are also included on the new restored table using point in time recovery:
    - Global secondary indexes (GSIs)
    - Local secondary indexes (LSIs)
    - Provisioned read and write capacity
    - Encryption settings
      
      All these settings come from the current settings of the source table at the time of restore.
    You must manually set up the following on the restored table:
    - Auto scaling policies
    - IAM policies
    - Amazon CloudWatch metrics and alarms
    - Tags
    - Stream settings
    - Time to Live (TTL) settings
    - Point in time recovery settings
    Parameters:
    
    restoreTableToPointInTimeRequest -
    
    Returns:
    
    Result of the RestoreTableToPointInTime operation returned by the service.
    
    Throws:
    
    TableAlreadyExistsException - A target table with the specified name already exists.
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    TableInUseException - A target table with the specified name is either being created or deleted.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InvalidRestoreTimeException - An invalid restore time was specified. RestoreDateTime must be between EarliestRestorableDateTime and LatestRestorableDateTime.
    
    PointInTimeRecoveryUnavailableException - Point in time recovery has not yet been enabled for this source table.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - restoreTableToPointInTime
```
default RestoreTableToPointInTimeResponse restoreTableToPointInTime(Consumer<RestoreTableToPointInTimeRequest.Builder> restoreTableToPointInTimeRequest)
                                                             throws TableAlreadyExistsException,
                                                                    TableNotFoundException,
                                                                    TableInUseException,
                                                                    LimitExceededException,
                                                                    InvalidRestoreTimeException,
                                                                    PointInTimeRecoveryUnavailableException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    DynamoDbException
```
    Restores the specified table to the specified point in time within EarliestRestorableDateTime and LatestRestorableDateTime. You can restore your table to any point in time during the last 35 days. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account.
    
    When you restore using point in time recovery, DynamoDB restores your table data to the state based on the selected date and time (day:hour:minute:second) to a new table.
    
    Along with data, the following are also included on the new restored table using point in time recovery:
    - Global secondary indexes (GSIs)
    - Local secondary indexes (LSIs)
    - Provisioned read and write capacity
    - Encryption settings
      
      All these settings come from the current settings of the source table at the time of restore.
    You must manually set up the following on the restored table:
    - Auto scaling policies
    - IAM policies
    - Amazon CloudWatch metrics and alarms
    - Tags
    - Stream settings
    - Time to Live (TTL) settings
    - Point in time recovery settings
    This is a convenience which creates an instance of the RestoreTableToPointInTimeRequest.Builder avoiding the need to create one manually via RestoreTableToPointInTimeRequest.builder()
    Parameters:
    
    restoreTableToPointInTimeRequest - A Consumer that will call methods on RestoreTableToPointInTimeInput.Builder to create a request.
    
    Returns:
    
    Result of the RestoreTableToPointInTime operation returned by the service.
    
    Throws:
    
    TableAlreadyExistsException - A target table with the specified name already exists.
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    TableInUseException - A target table with the specified name is either being created or deleted.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InvalidRestoreTimeException - An invalid restore time was specified. RestoreDateTime must be between EarliestRestorableDateTime and LatestRestorableDateTime.
    
    PointInTimeRecoveryUnavailableException - Point in time recovery has not yet been enabled for this source table.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - scan
```
default ScanResponse scan(ScanRequest scanRequest)
                   throws ProvisionedThroughputExceededException,
                          ResourceNotFoundException,
                          RequestLimitExceededException,
                          InternalServerErrorException,
                          AwsServiceException,
                          SdkClientException,
                          DynamoDbException
```
    The Scan operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression operation.
    
    If the total number of scanned items exceeds the maximum dataset size limit of 1 MB, the scan stops and results are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.
    
    A single Scan operation reads up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    Scan operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel Scan operation by providing the Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
    
    Scan uses eventually consistent reads when accessing the data in a table; therefore, the result set might not include the changes to data in the table immediately before the operation began. If you need a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead parameter to true.
    
    Parameters:
    
    scanRequest - Represents the input of a Scan operation.
    
    Returns:
    
    Result of the Scan operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - scan
```
default ScanResponse scan(Consumer<ScanRequest.Builder> scanRequest)
                   throws ProvisionedThroughputExceededException,
                          ResourceNotFoundException,
                          RequestLimitExceededException,
                          InternalServerErrorException,
                          AwsServiceException,
                          SdkClientException,
                          DynamoDbException
```
    The Scan operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression operation.
    
    If the total number of scanned items exceeds the maximum dataset size limit of 1 MB, the scan stops and results are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.
    
    A single Scan operation reads up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    Scan operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel Scan operation by providing the Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
    
    Scan uses eventually consistent reads when accessing the data in a table; therefore, the result set might not include the changes to data in the table immediately before the operation began. If you need a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead parameter to true.
    
    This is a convenience which creates an instance of the ScanRequest.Builder avoiding the need to create one manually via ScanRequest.builder()
    
    Parameters:
    
    scanRequest - A Consumer that will call methods on ScanInput.Builder to create a request. Represents the input of a Scan operation.
    
    Returns:
    
    Result of the Scan operation returned by the service.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - scanPaginator
```
default ScanIterable scanPaginator(ScanRequest scanRequest)
                            throws ProvisionedThroughputExceededException,
                                   ResourceNotFoundException,
                                   RequestLimitExceededException,
                                   InternalServerErrorException,
                                   AwsServiceException,
                                   SdkClientException,
                                   DynamoDbException
```
    The Scan operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression operation.
    
    If the total number of scanned items exceeds the maximum dataset size limit of 1 MB, the scan stops and results are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.
    
    A single Scan operation reads up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    Scan operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel Scan operation by providing the Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
    
    Scan uses eventually consistent reads when accessing the data in a table; therefore, the result set might not include the changes to data in the table immediately before the operation began. If you need a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead parameter to true.
    
    This is a variant of scan(software.amazon.awssdk.services.dynamodb.model.ScanRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ScanIterable responses = client.scanPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ScanIterable responses = client.scanPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ScanResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ScanIterable responses = client.scanPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of Limit won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the scan(software.amazon.awssdk.services.dynamodb.model.ScanRequest) operation.
    Parameters:
    
    scanRequest - Represents the input of a Scan operation.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - scanPaginator
```
default ScanIterable scanPaginator(Consumer<ScanRequest.Builder> scanRequest)
                            throws ProvisionedThroughputExceededException,
                                   ResourceNotFoundException,
                                   RequestLimitExceededException,
                                   InternalServerErrorException,
                                   AwsServiceException,
                                   SdkClientException,
                                   DynamoDbException
```
    The Scan operation returns one or more items and item attributes by accessing every item in a table or a secondary index. To have DynamoDB return fewer items, you can provide a FilterExpression operation.
    
    If the total number of scanned items exceeds the maximum dataset size limit of 1 MB, the scan stops and results are returned to the user as a LastEvaluatedKey value to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.
    
    A single Scan operation reads up to the maximum number of items set (if using the Limit parameter) or a maximum of 1 MB of data and then apply any filtering to the results using FilterExpression. If LastEvaluatedKey is present in the response, you need to paginate the result set. For more information, see Paginating the Results in the Amazon DynamoDB Developer Guide.
    
    Scan operations proceed sequentially; however, for faster performance on a large table or secondary index, applications can request a parallel Scan operation by providing the Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
    
    Scan uses eventually consistent reads when accessing the data in a table; therefore, the result set might not include the changes to data in the table immediately before the operation began. If you need a consistent copy of the data, as of the time that the Scan begins, you can set the ConsistentRead parameter to true.
    
    This is a variant of scan(software.amazon.awssdk.services.dynamodb.model.ScanRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ScanIterable responses = client.scanPaginator(request);
 responses.stream().forEach(....);
 
 
```
    2) Using For loop
```
 {
     @code
     software.amazon.awssdk.services.dynamodb.paginators.ScanIterable responses = client.scanPaginator(request);
     for (software.amazon.awssdk.services.dynamodb.model.ScanResponse response : responses) {
         // do something;
     }
 }
 
```
    3) Use iterator directly
```
 
 software.amazon.awssdk.services.dynamodb.paginators.ScanIterable responses = client.scanPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 
```
    Please notice that the configuration of Limit won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the scan(software.amazon.awssdk.services.dynamodb.model.ScanRequest) operation.
    
    This is a convenience which creates an instance of the ScanRequest.Builder avoiding the need to create one manually via ScanRequest.builder()
    Parameters:
    
    scanRequest - A Consumer that will call methods on ScanInput.Builder to create a request. Represents the input of a Scan operation.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws LimitExceededException,
                                        ResourceNotFoundException,
                                        InternalServerErrorException,
                                        ResourceInUseException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Associate a set of tags with an Amazon DynamoDB resource. You can then activate these user-defined tags so that they appear on the Billing and Cost Management console for cost allocation tracking. You can call TagResource up to five times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Parameters:
    
    tagResourceRequest -
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws LimitExceededException,
                                        ResourceNotFoundException,
                                        InternalServerErrorException,
                                        ResourceInUseException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Associate a set of tags with an Amazon DynamoDB resource. You can then activate these user-defined tags so that they appear on the Billing and Cost Management console for cost allocation tracking. You can call TagResource up to five times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
    
    Parameters:
    
    tagResourceRequest - A Consumer that will call methods on TagResourceInput.Builder to create a request.
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - transactGetItems
```
default TransactGetItemsResponse transactGetItems(TransactGetItemsRequest transactGetItemsRequest)
                                           throws ResourceNotFoundException,
                                                  TransactionCanceledException,
                                                  ProvisionedThroughputExceededException,
                                                  RequestLimitExceededException,
                                                  InternalServerErrorException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    TransactGetItems is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region. A TransactGetItems call can contain up to 100 TransactGetItem objects, each of which contains a Get structure that specifies an item to retrieve from a table in the account and Region. A call to TransactGetItems cannot retrieve items from tables in more than one Amazon Web Services account or Region. The aggregate size of the items in the transaction cannot exceed 4 MB.
    
    DynamoDB rejects the entire TransactGetItems request if any of the following is true:
    - A conflicting operation is in the process of updating an item to be read.
    - There is insufficient provisioned capacity for the transaction to be completed.
    - There is a user error, such as an invalid data format.
    - The aggregate size of the items in the transaction cannot exceed 4 MB.
    Parameters:
    
    transactGetItemsRequest -
    
    Returns:
    
    Result of the TransactGetItems operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    TransactionCanceledException - The entire transaction request was canceled.
    
    DynamoDB cancels a TransactWriteItems request under the following circumstances:
    
    A condition in one of the condition expressions is not met.
    
    A table in the TransactWriteItems request is in a different account or region.
    
    More than one action in the TransactWriteItems operation targets the same item.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    An item size becomes too large (larger than 400 KB), or a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    
    There is a user error, such as an invalid data format.
    
    DynamoDB cancels a TransactGetItems request under the following circumstances:
    
    There is an ongoing TransactGetItems operation that conflicts with a concurrent PutItem, UpdateItem, DeleteItem or TransactWriteItems request. In this case the TransactGetItems operation fails with a TransactionCanceledException.
    
    A table in the TransactGetItems request is in a different account or region.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    There is a user error, such as an invalid data format.
    
    If using Java, DynamoDB lists the cancellation reasons on the CancellationReasons property. This property is not set for other languages. Transaction cancellation reasons are ordered in the order of requested items, if an item has no error it will have None code and Null message.
    
    Cancellation reason codes and possible error messages:
    
    No Errors:
    
    Code: None
    
    Message: null
    
    Conditional Check Failed:
    
    Code: ConditionalCheckFailed
    
    Message: The conditional request failed.
    
    Item Collection Size Limit Exceeded:
    
    Code: ItemCollectionSizeLimitExceeded
    
    Message: Collection size exceeded.
    
    Transaction Conflict:
    
    Code: TransactionConflict
    
    Message: Transaction is ongoing for the item.
    
    Provisioned Throughput Exceeded:
    
    Code: ProvisionedThroughputExceeded
    
    Messages:
    
    The level of configured provisioned throughput for the table was exceeded. Consider increasing your provisioning level with the UpdateTable API.
    
    This Message is received when provisioned throughput is exceeded is on a provisioned DynamoDB table.
    
    The level of configured provisioned throughput for one or more global secondary indexes of the table was exceeded. Consider increasing your provisioning level for the under-provisioned global secondary indexes with the UpdateTable API.
    
    This message is returned when provisioned throughput is exceeded is on a provisioned GSI.
    
    Throttling Error:
    
    Code: ThrottlingError
    
    Messages:
    
    Throughput exceeds the current capacity of your table or index. DynamoDB is automatically scaling your table or index so please try again shortly. If exceptions persist, check if you have a hot key: https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/bp-partition-key-design.html.
    
    This message is returned when writes get throttled on an On-Demand table as DynamoDB is automatically scaling the table.
    
    Throughput exceeds the current capacity for one or more global secondary indexes. DynamoDB is automatically scaling your index so please try again shortly.
    
    This message is returned when when writes get throttled on an On-Demand GSI as DynamoDB is automatically scaling the GSI.
    
    Validation Error:
    
    Code: ValidationError
    
    Messages:
    
    One or more parameter values were invalid.
    
    The update expression attempted to update the secondary index key beyond allowed size limits.
    
    The update expression attempted to update the secondary index key to unsupported type.
    
    An operand in the update expression has an incorrect data type.
    
    Item size to update has exceeded the maximum allowed size.
    
    Number overflow. Attempting to store a number with magnitude larger than supported range.
    
    Type mismatch for attribute to update.
    
    Nesting Levels have exceeded supported limits.
    
    The document path provided in the update expression is invalid for update.
    
    The provided expression refers to an attribute that does not exist in the item.
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - transactGetItems
```
default TransactGetItemsResponse transactGetItems(Consumer<TransactGetItemsRequest.Builder> transactGetItemsRequest)
                                           throws ResourceNotFoundException,
                                                  TransactionCanceledException,
                                                  ProvisionedThroughputExceededException,
                                                  RequestLimitExceededException,
                                                  InternalServerErrorException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    TransactGetItems is a synchronous operation that atomically retrieves multiple items from one or more tables (but not from indexes) in a single account and Region. A TransactGetItems call can contain up to 100 TransactGetItem objects, each of which contains a Get structure that specifies an item to retrieve from a table in the account and Region. A call to TransactGetItems cannot retrieve items from tables in more than one Amazon Web Services account or Region. The aggregate size of the items in the transaction cannot exceed 4 MB.
    
    DynamoDB rejects the entire TransactGetItems request if any of the following is true:
    - A conflicting operation is in the process of updating an item to be read.
    - There is insufficient provisioned capacity for the transaction to be completed.
    - There is a user error, such as an invalid data format.
    - The aggregate size of the items in the transaction cannot exceed 4 MB.
    This is a convenience which creates an instance of the TransactGetItemsRequest.Builder avoiding the need to create one manually via TransactGetItemsRequest.builder()
    Parameters:
    
    transactGetItemsRequest - A Consumer that will call methods on TransactGetItemsInput.Builder to create a request.
    
    Returns:
    
    Result of the TransactGetItems operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    TransactionCanceledException - The entire transaction request was canceled.
    
    DynamoDB cancels a TransactWriteItems request under the following circumstances:
    
    A condition in one of the condition expressions is not met.
    
    A table in the TransactWriteItems request is in a different account or region.
    
    More than one action in the TransactWriteItems operation targets the same item.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    An item size becomes too large (larger than 400 KB), or a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    
    There is a user error, such as an invalid data format.
    
    DynamoDB cancels a TransactGetItems request under the following circumstances:
    
    There is an ongoing TransactGetItems operation that conflicts with a concurrent PutItem, UpdateItem, DeleteItem or TransactWriteItems request. In this case the TransactGetItems operation fails with a TransactionCanceledException.
    
    A table in the TransactGetItems request is in a different account or region.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    There is a user error, such as an invalid data format.
    
    If using Java, DynamoDB lists the cancellation reasons on the CancellationReasons property. This property is not set for other languages. Transaction cancellation reasons are ordered in the order of requested items, if an item has no error it will have None code and Null message.
    
    Cancellation reason codes and possible error messages:
    
    No Errors:
    
    Code: None
    
    Message: null
    
    Conditional Check Failed:
    
    Code: ConditionalCheckFailed
    
    Message: The conditional request failed.
    
    Item Collection Size Limit Exceeded:
    
    Code: ItemCollectionSizeLimitExceeded
    
    Message: Collection size exceeded.
    
    Transaction Conflict:
    
    Code: TransactionConflict
    
    Message: Transaction is ongoing for the item.
    
    Provisioned Throughput Exceeded:
    
    Code: ProvisionedThroughputExceeded
    
    Messages:
    
    The level of configured provisioned throughput for the table was exceeded. Consider increasing your provisioning level with the UpdateTable API.
    
    This Message is received when provisioned throughput is exceeded is on a provisioned DynamoDB table.
    
    The level of configured provisioned throughput for one or more global secondary indexes of the table was exceeded. Consider increasing your provisioning level for the under-provisioned global secondary indexes with the UpdateTable API.
    
    This message is returned when provisioned throughput is exceeded is on a provisioned GSI.
    
    Throttling Error:
    
    Code: ThrottlingError
    
    Messages:
    
    Throughput exceeds the current capacity of your table or index. DynamoDB is automatically scaling your table or index so please try again shortly. If exceptions persist, check if you have a hot key: https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/bp-partition-key-design.html.
    
    This message is returned when writes get throttled on an On-Demand table as DynamoDB is automatically scaling the table.
    
    Throughput exceeds the current capacity for one or more global secondary indexes. DynamoDB is automatically scaling your index so please try again shortly.
    
    This message is returned when when writes get throttled on an On-Demand GSI as DynamoDB is automatically scaling the GSI.
    
    Validation Error:
    
    Code: ValidationError
    
    Messages:
    
    One or more parameter values were invalid.
    
    The update expression attempted to update the secondary index key beyond allowed size limits.
    
    The update expression attempted to update the secondary index key to unsupported type.
    
    An operand in the update expression has an incorrect data type.
    
    Item size to update has exceeded the maximum allowed size.
    
    Number overflow. Attempting to store a number with magnitude larger than supported range.
    
    Type mismatch for attribute to update.
    
    Nesting Levels have exceeded supported limits.
    
    The document path provided in the update expression is invalid for update.
    
    The provided expression refers to an attribute that does not exist in the item.
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - transactWriteItems
```
default TransactWriteItemsResponse transactWriteItems(TransactWriteItemsRequest transactWriteItemsRequest)
                                               throws ResourceNotFoundException,
                                                      TransactionCanceledException,
                                                      TransactionInProgressException,
                                                      IdempotentParameterMismatchException,
                                                      ProvisionedThroughputExceededException,
                                                      RequestLimitExceededException,
                                                      InternalServerErrorException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      DynamoDbException
```
    TransactWriteItems is a synchronous write operation that groups up to 100 action requests. These actions can target items in different tables, but not in different Amazon Web Services accounts or Regions, and no two actions can target the same item. For example, you cannot both ConditionCheck and Update the same item. The aggregate size of the items in the transaction cannot exceed 4 MB.
    
    The actions are completed atomically so that either all of them succeed, or all of them fail. They are defined by the following objects:
    - Put — Initiates a PutItem operation to write a new item. This structure specifies the primary key of the item to be written, the name of the table to write it in, an optional condition expression that must be satisfied for the write to succeed, a list of the item's attributes, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - Update — Initiates an UpdateItem operation to update an existing item. This structure specifies the primary key of the item to be updated, the name of the table where it resides, an optional condition expression that must be satisfied for the update to succeed, an expression that defines one or more attributes to be updated, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - Delete — Initiates a DeleteItem operation to delete an existing item. This structure specifies the primary key of the item to be deleted, the name of the table where it resides, an optional condition expression that must be satisfied for the deletion to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - ConditionCheck — Applies a condition to an item that is not being modified by the transaction. This structure specifies the primary key of the item to be checked, the name of the table where it resides, a condition expression that must be satisfied for the transaction to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    DynamoDB rejects the entire TransactWriteItems request if any of the following is true:
    - A condition in one of the condition expressions is not met.
    - An ongoing operation is in the process of updating the same item.
    - There is insufficient provisioned capacity for the transaction to be completed.
    - An item size becomes too large (bigger than 400 KB), a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    - The aggregate size of the items in the transaction exceeds 4 MB.
    - There is a user error, such as an invalid data format.
    Parameters:
    
    transactWriteItemsRequest -
    
    Returns:
    
    Result of the TransactWriteItems operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    TransactionCanceledException - The entire transaction request was canceled.
    
    DynamoDB cancels a TransactWriteItems request under the following circumstances:
    
    A condition in one of the condition expressions is not met.
    
    A table in the TransactWriteItems request is in a different account or region.
    
    More than one action in the TransactWriteItems operation targets the same item.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    An item size becomes too large (larger than 400 KB), or a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    
    There is a user error, such as an invalid data format.
    
    DynamoDB cancels a TransactGetItems request under the following circumstances:
    
    There is an ongoing TransactGetItems operation that conflicts with a concurrent PutItem, UpdateItem, DeleteItem or TransactWriteItems request. In this case the TransactGetItems operation fails with a TransactionCanceledException.
    
    A table in the TransactGetItems request is in a different account or region.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    There is a user error, such as an invalid data format.
    
    If using Java, DynamoDB lists the cancellation reasons on the CancellationReasons property. This property is not set for other languages. Transaction cancellation reasons are ordered in the order of requested items, if an item has no error it will have None code and Null message.
    
    Cancellation reason codes and possible error messages:
    
    No Errors:
    
    Code: None
    
    Message: null
    
    Conditional Check Failed:
    
    Code: ConditionalCheckFailed
    
    Message: The conditional request failed.
    
    Item Collection Size Limit Exceeded:
    
    Code: ItemCollectionSizeLimitExceeded
    
    Message: Collection size exceeded.
    
    Transaction Conflict:
    
    Code: TransactionConflict
    
    Message: Transaction is ongoing for the item.
    
    Provisioned Throughput Exceeded:
    
    Code: ProvisionedThroughputExceeded
    
    Messages:
    
    The level of configured provisioned throughput for the table was exceeded. Consider increasing your provisioning level with the UpdateTable API.
    
    This Message is received when provisioned throughput is exceeded is on a provisioned DynamoDB table.
    
    The level of configured provisioned throughput for one or more global secondary indexes of the table was exceeded. Consider increasing your provisioning level for the under-provisioned global secondary indexes with the UpdateTable API.
    
    This message is returned when provisioned throughput is exceeded is on a provisioned GSI.
    
    Throttling Error:
    
    Code: ThrottlingError
    
    Messages:
    
    Throughput exceeds the current capacity of your table or index. DynamoDB is automatically scaling your table or index so please try again shortly. If exceptions persist, check if you have a hot key: https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/bp-partition-key-design.html.
    
    This message is returned when writes get throttled on an On-Demand table as DynamoDB is automatically scaling the table.
    
    Throughput exceeds the current capacity for one or more global secondary indexes. DynamoDB is automatically scaling your index so please try again shortly.
    
    This message is returned when when writes get throttled on an On-Demand GSI as DynamoDB is automatically scaling the GSI.
    
    Validation Error:
    
    Code: ValidationError
    
    Messages:
    
    One or more parameter values were invalid.
    
    The update expression attempted to update the secondary index key beyond allowed size limits.
    
    The update expression attempted to update the secondary index key to unsupported type.
    
    An operand in the update expression has an incorrect data type.
    
    Item size to update has exceeded the maximum allowed size.
    
    Number overflow. Attempting to store a number with magnitude larger than supported range.
    
    Type mismatch for attribute to update.
    
    Nesting Levels have exceeded supported limits.
    
    The document path provided in the update expression is invalid for update.
    
    The provided expression refers to an attribute that does not exist in the item.
    TransactionInProgressException - The transaction with the given request token is already in progress.
    
    IdempotentParameterMismatchException - DynamoDB rejected the request because you retried a request with a different payload but with an idempotent token that was already used.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - transactWriteItems
```
default TransactWriteItemsResponse transactWriteItems(Consumer<TransactWriteItemsRequest.Builder> transactWriteItemsRequest)
                                               throws ResourceNotFoundException,
                                                      TransactionCanceledException,
                                                      TransactionInProgressException,
                                                      IdempotentParameterMismatchException,
                                                      ProvisionedThroughputExceededException,
                                                      RequestLimitExceededException,
                                                      InternalServerErrorException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      DynamoDbException
```
    TransactWriteItems is a synchronous write operation that groups up to 100 action requests. These actions can target items in different tables, but not in different Amazon Web Services accounts or Regions, and no two actions can target the same item. For example, you cannot both ConditionCheck and Update the same item. The aggregate size of the items in the transaction cannot exceed 4 MB.
    
    The actions are completed atomically so that either all of them succeed, or all of them fail. They are defined by the following objects:
    - Put — Initiates a PutItem operation to write a new item. This structure specifies the primary key of the item to be written, the name of the table to write it in, an optional condition expression that must be satisfied for the write to succeed, a list of the item's attributes, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - Update — Initiates an UpdateItem operation to update an existing item. This structure specifies the primary key of the item to be updated, the name of the table where it resides, an optional condition expression that must be satisfied for the update to succeed, an expression that defines one or more attributes to be updated, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - Delete — Initiates a DeleteItem operation to delete an existing item. This structure specifies the primary key of the item to be deleted, the name of the table where it resides, an optional condition expression that must be satisfied for the deletion to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    - ConditionCheck — Applies a condition to an item that is not being modified by the transaction. This structure specifies the primary key of the item to be checked, the name of the table where it resides, a condition expression that must be satisfied for the transaction to succeed, and a field indicating whether to retrieve the item's attributes if the condition is not met.
    DynamoDB rejects the entire TransactWriteItems request if any of the following is true:
    - A condition in one of the condition expressions is not met.
    - An ongoing operation is in the process of updating the same item.
    - There is insufficient provisioned capacity for the transaction to be completed.
    - An item size becomes too large (bigger than 400 KB), a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    - The aggregate size of the items in the transaction exceeds 4 MB.
    - There is a user error, such as an invalid data format.
    This is a convenience which creates an instance of the TransactWriteItemsRequest.Builder avoiding the need to create one manually via TransactWriteItemsRequest.builder()
    Parameters:
    
    transactWriteItemsRequest - A Consumer that will call methods on TransactWriteItemsInput.Builder to create a request.
    
    Returns:
    
    Result of the TransactWriteItems operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    TransactionCanceledException - The entire transaction request was canceled.
    
    DynamoDB cancels a TransactWriteItems request under the following circumstances:
    
    A condition in one of the condition expressions is not met.
    
    A table in the TransactWriteItems request is in a different account or region.
    
    More than one action in the TransactWriteItems operation targets the same item.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    An item size becomes too large (larger than 400 KB), or a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
    
    There is a user error, such as an invalid data format.
    
    DynamoDB cancels a TransactGetItems request under the following circumstances:
    
    There is an ongoing TransactGetItems operation that conflicts with a concurrent PutItem, UpdateItem, DeleteItem or TransactWriteItems request. In this case the TransactGetItems operation fails with a TransactionCanceledException.
    
    A table in the TransactGetItems request is in a different account or region.
    
    There is insufficient provisioned capacity for the transaction to be completed.
    
    There is a user error, such as an invalid data format.
    
    If using Java, DynamoDB lists the cancellation reasons on the CancellationReasons property. This property is not set for other languages. Transaction cancellation reasons are ordered in the order of requested items, if an item has no error it will have None code and Null message.
    
    Cancellation reason codes and possible error messages:
    
    No Errors:
    
    Code: None
    
    Message: null
    
    Conditional Check Failed:
    
    Code: ConditionalCheckFailed
    
    Message: The conditional request failed.
    
    Item Collection Size Limit Exceeded:
    
    Code: ItemCollectionSizeLimitExceeded
    
    Message: Collection size exceeded.
    
    Transaction Conflict:
    
    Code: TransactionConflict
    
    Message: Transaction is ongoing for the item.
    
    Provisioned Throughput Exceeded:
    
    Code: ProvisionedThroughputExceeded
    
    Messages:
    
    The level of configured provisioned throughput for the table was exceeded. Consider increasing your provisioning level with the UpdateTable API.
    
    This Message is received when provisioned throughput is exceeded is on a provisioned DynamoDB table.
    
    The level of configured provisioned throughput for one or more global secondary indexes of the table was exceeded. Consider increasing your provisioning level for the under-provisioned global secondary indexes with the UpdateTable API.
    
    This message is returned when provisioned throughput is exceeded is on a provisioned GSI.
    
    Throttling Error:
    
    Code: ThrottlingError
    
    Messages:
    
    Throughput exceeds the current capacity of your table or index. DynamoDB is automatically scaling your table or index so please try again shortly. If exceptions persist, check if you have a hot key: https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/bp-partition-key-design.html.
    
    This message is returned when writes get throttled on an On-Demand table as DynamoDB is automatically scaling the table.
    
    Throughput exceeds the current capacity for one or more global secondary indexes. DynamoDB is automatically scaling your index so please try again shortly.
    
    This message is returned when when writes get throttled on an On-Demand GSI as DynamoDB is automatically scaling the GSI.
    
    Validation Error:
    
    Code: ValidationError
    
    Messages:
    
    One or more parameter values were invalid.
    
    The update expression attempted to update the secondary index key beyond allowed size limits.
    
    The update expression attempted to update the secondary index key to unsupported type.
    
    An operand in the update expression has an incorrect data type.
    
    Item size to update has exceeded the maximum allowed size.
    
    Number overflow. Attempting to store a number with magnitude larger than supported range.
    
    Type mismatch for attribute to update.
    
    Nesting Levels have exceeded supported limits.
    
    The document path provided in the update expression is invalid for update.
    
    The provided expression refers to an attribute that does not exist in the item.
    TransactionInProgressException - The transaction with the given request token is already in progress.
    
    IdempotentParameterMismatchException - DynamoDB rejected the request because you retried a request with a different payload but with an idempotent token that was already used.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws LimitExceededException,
                                            ResourceNotFoundException,
                                            InternalServerErrorException,
                                            ResourceInUseException,
                                            AwsServiceException,
                                            SdkClientException,
                                            DynamoDbException
```
    Removes the association of tags from an Amazon DynamoDB resource. You can call UntagResource up to five times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws LimitExceededException,
                                            ResourceNotFoundException,
                                            InternalServerErrorException,
                                            ResourceInUseException,
                                            AwsServiceException,
                                            SdkClientException,
                                            DynamoDbException
```
    Removes the association of tags from an Amazon DynamoDB resource. You can call UntagResource up to five times per second, per account.
    
    For an overview on tagging DynamoDB resources, see Tagging for DynamoDB in the Amazon DynamoDB Developer Guide.
    
    This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
    
    Parameters:
    
    untagResourceRequest - A Consumer that will call methods on UntagResourceInput.Builder to create a request.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateContinuousBackups
```
default UpdateContinuousBackupsResponse updateContinuousBackups(UpdateContinuousBackupsRequest updateContinuousBackupsRequest)
                                                         throws TableNotFoundException,
                                                                ContinuousBackupsUnavailableException,
                                                                InternalServerErrorException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                DynamoDbException
```
    UpdateContinuousBackups enables or disables point in time recovery for the specified table. A successful UpdateContinuousBackups call returns the current ContinuousBackupsDescription. Continuous backups are ENABLED on all tables at table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to ENABLED.
    
    Once continuous backups and point in time recovery are enabled, you can restore to any point in time within EarliestRestorableDateTime and LatestRestorableDateTime.
    
    LatestRestorableDateTime is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days.
    
    Parameters:
    
    updateContinuousBackupsRequest -
    
    Returns:
    
    Result of the UpdateContinuousBackups operation returned by the service.
    
    Throws:
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    ContinuousBackupsUnavailableException - Backups have not yet been enabled for this table.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateContinuousBackups
```
default UpdateContinuousBackupsResponse updateContinuousBackups(Consumer<UpdateContinuousBackupsRequest.Builder> updateContinuousBackupsRequest)
                                                         throws TableNotFoundException,
                                                                ContinuousBackupsUnavailableException,
                                                                InternalServerErrorException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                DynamoDbException
```
    UpdateContinuousBackups enables or disables point in time recovery for the specified table. A successful UpdateContinuousBackups call returns the current ContinuousBackupsDescription. Continuous backups are ENABLED on all tables at table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to ENABLED.
    
    Once continuous backups and point in time recovery are enabled, you can restore to any point in time within EarliestRestorableDateTime and LatestRestorableDateTime.
    
    LatestRestorableDateTime is typically 5 minutes before the current time. You can restore your table to any point in time during the last 35 days.
    
    This is a convenience which creates an instance of the UpdateContinuousBackupsRequest.Builder avoiding the need to create one manually via UpdateContinuousBackupsRequest.builder()
    
    Parameters:
    
    updateContinuousBackupsRequest - A Consumer that will call methods on UpdateContinuousBackupsInput.Builder to create a request.
    
    Returns:
    
    Result of the UpdateContinuousBackups operation returned by the service.
    
    Throws:
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    ContinuousBackupsUnavailableException - Backups have not yet been enabled for this table.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateContributorInsights
```
default UpdateContributorInsightsResponse updateContributorInsights(UpdateContributorInsightsRequest updateContributorInsightsRequest)
                                                             throws ResourceNotFoundException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    DynamoDbException
```
    Updates the status for contributor insights for a specific table or index. CloudWatch Contributor Insights for DynamoDB graphs display the partition key and (if applicable) sort key of frequently accessed items and frequently throttled items in plaintext. If you require the use of Amazon Web Services Key Management Service (KMS) to encrypt this table’s partition key and sort key data with an Amazon Web Services managed key or customer managed key, you should not enable CloudWatch Contributor Insights for DynamoDB for this table.
    
    Parameters:
    
    updateContributorInsightsRequest -
    
    Returns:
    
    Result of the UpdateContributorInsights operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateContributorInsights
```
default UpdateContributorInsightsResponse updateContributorInsights(Consumer<UpdateContributorInsightsRequest.Builder> updateContributorInsightsRequest)
                                                             throws ResourceNotFoundException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    DynamoDbException
```
    Updates the status for contributor insights for a specific table or index. CloudWatch Contributor Insights for DynamoDB graphs display the partition key and (if applicable) sort key of frequently accessed items and frequently throttled items in plaintext. If you require the use of Amazon Web Services Key Management Service (KMS) to encrypt this table’s partition key and sort key data with an Amazon Web Services managed key or customer managed key, you should not enable CloudWatch Contributor Insights for DynamoDB for this table.
    
    This is a convenience which creates an instance of the UpdateContributorInsightsRequest.Builder avoiding the need to create one manually via UpdateContributorInsightsRequest.builder()
    
    Parameters:
    
    updateContributorInsightsRequest - A Consumer that will call methods on UpdateContributorInsightsInput.Builder to create a request.
    
    Returns:
    
    Result of the UpdateContributorInsights operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateGlobalTable
```
default UpdateGlobalTableResponse updateGlobalTable(UpdateGlobalTableRequest updateGlobalTableRequest)
                                             throws InternalServerErrorException,
                                                    GlobalTableNotFoundException,
                                                    ReplicaAlreadyExistsException,
                                                    ReplicaNotFoundException,
                                                    TableNotFoundException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    DynamoDbException
```
    Adds or removes replicas in the specified global table. The global table must already exist to be able to use this operation. Any replica to be added must be empty, have the same name as the global table, have the same key schema, have DynamoDB Streams enabled, and have the same provisioned and maximum write capacity units.
    
    Although you can use UpdateGlobalTable to add replicas and remove replicas in a single request, for simplicity we recommend that you issue separate requests for adding or removing replicas.
    
    If global secondary indexes are specified, then the following conditions must also be met:
    - The global secondary indexes must have the same name.
    - The global secondary indexes must have the same hash key and sort key (if present).
    - The global secondary indexes must have the same provisioned and maximum write capacity units.
    Parameters:
    
    updateGlobalTableRequest -
    
    Returns:
    
    Result of the UpdateGlobalTable operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    GlobalTableNotFoundException - The specified global table does not exist.
    
    ReplicaAlreadyExistsException - The specified replica is already part of the global table.
    
    ReplicaNotFoundException - The specified replica is no longer part of the global table.
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateGlobalTable
```
default UpdateGlobalTableResponse updateGlobalTable(Consumer<UpdateGlobalTableRequest.Builder> updateGlobalTableRequest)
                                             throws InternalServerErrorException,
                                                    GlobalTableNotFoundException,
                                                    ReplicaAlreadyExistsException,
                                                    ReplicaNotFoundException,
                                                    TableNotFoundException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    DynamoDbException
```
    Adds or removes replicas in the specified global table. The global table must already exist to be able to use this operation. Any replica to be added must be empty, have the same name as the global table, have the same key schema, have DynamoDB Streams enabled, and have the same provisioned and maximum write capacity units.
    
    Although you can use UpdateGlobalTable to add replicas and remove replicas in a single request, for simplicity we recommend that you issue separate requests for adding or removing replicas.
    
    If global secondary indexes are specified, then the following conditions must also be met:
    - The global secondary indexes must have the same name.
    - The global secondary indexes must have the same hash key and sort key (if present).
    - The global secondary indexes must have the same provisioned and maximum write capacity units.
    This is a convenience which creates an instance of the UpdateGlobalTableRequest.Builder avoiding the need to create one manually via UpdateGlobalTableRequest.builder()
    Parameters:
    
    updateGlobalTableRequest - A Consumer that will call methods on UpdateGlobalTableInput.Builder to create a request.
    
    Returns:
    
    Result of the UpdateGlobalTable operation returned by the service.
    
    Throws:
    
    InternalServerErrorException - An error occurred on the server side.
    
    GlobalTableNotFoundException - The specified global table does not exist.
    
    ReplicaAlreadyExistsException - The specified replica is already part of the global table.
    
    ReplicaNotFoundException - The specified replica is no longer part of the global table.
    
    TableNotFoundException - A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateGlobalTableSettings
```
default UpdateGlobalTableSettingsResponse updateGlobalTableSettings(UpdateGlobalTableSettingsRequest updateGlobalTableSettingsRequest)
                                                             throws GlobalTableNotFoundException,
                                                                    ReplicaNotFoundException,
                                                                    IndexNotFoundException,
                                                                    LimitExceededException,
                                                                    ResourceInUseException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    DynamoDbException
```
    Updates settings for a global table.
    
    Parameters:
    
    updateGlobalTableSettingsRequest -
    
    Returns:
    
    Result of the UpdateGlobalTableSettings operation returned by the service.
    
    Throws:
    
    GlobalTableNotFoundException - The specified global table does not exist.
    
    ReplicaNotFoundException - The specified replica is no longer part of the global table.
    
    IndexNotFoundException - The operation tried to access a nonexistent index.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateGlobalTableSettings
```
default UpdateGlobalTableSettingsResponse updateGlobalTableSettings(Consumer<UpdateGlobalTableSettingsRequest.Builder> updateGlobalTableSettingsRequest)
                                                             throws GlobalTableNotFoundException,
                                                                    ReplicaNotFoundException,
                                                                    IndexNotFoundException,
                                                                    LimitExceededException,
                                                                    ResourceInUseException,
                                                                    InternalServerErrorException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    DynamoDbException
```
    Updates settings for a global table.
    
    This is a convenience which creates an instance of the UpdateGlobalTableSettingsRequest.Builder avoiding the need to create one manually via UpdateGlobalTableSettingsRequest.builder()
    
    Parameters:
    
    updateGlobalTableSettingsRequest - A Consumer that will call methods on UpdateGlobalTableSettingsInput.Builder to create a request.
    
    Returns:
    
    Result of the UpdateGlobalTableSettings operation returned by the service.
    
    Throws:
    
    GlobalTableNotFoundException - The specified global table does not exist.
    
    ReplicaNotFoundException - The specified replica is no longer part of the global table.
    
    IndexNotFoundException - The operation tried to access a nonexistent index.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateItem
```
default UpdateItemResponse updateItem(UpdateItemRequest updateItemRequest)
                               throws ConditionalCheckFailedException,
                                      ProvisionedThroughputExceededException,
                                      ResourceNotFoundException,
                                      ItemCollectionSizeLimitExceededException,
                                      TransactionConflictException,
                                      RequestLimitExceededException,
                                      InternalServerErrorException,
                                      AwsServiceException,
                                      SdkClientException,
                                      DynamoDbException
```
    Edits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
    
    You can also return the item's attribute values in the same UpdateItem operation using the ReturnValues parameter.
    
    Parameters:
    
    updateItemRequest - Represents the input of an UpdateItem operation.
    
    Returns:
    
    Result of the UpdateItem operation returned by the service.
    
    Throws:
    
    ConditionalCheckFailedException - A condition specified in the operation could not be evaluated.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    TransactionConflictException - Operation was rejected because there is an ongoing transaction for the item.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateItem
```
default UpdateItemResponse updateItem(Consumer<UpdateItemRequest.Builder> updateItemRequest)
                               throws ConditionalCheckFailedException,
                                      ProvisionedThroughputExceededException,
                                      ResourceNotFoundException,
                                      ItemCollectionSizeLimitExceededException,
                                      TransactionConflictException,
                                      RequestLimitExceededException,
                                      InternalServerErrorException,
                                      AwsServiceException,
                                      SdkClientException,
                                      DynamoDbException
```
    Edits an existing item's attributes, or adds a new item to the table if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update on an existing item (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
    
    You can also return the item's attribute values in the same UpdateItem operation using the ReturnValues parameter.
    
    This is a convenience which creates an instance of the UpdateItemRequest.Builder avoiding the need to create one manually via UpdateItemRequest.builder()
    
    Parameters:
    
    updateItemRequest - A Consumer that will call methods on UpdateItemInput.Builder to create a request. Represents the input of an UpdateItem operation.
    
    Returns:
    
    Result of the UpdateItem operation returned by the service.
    
    Throws:
    
    ConditionalCheckFailedException - A condition specified in the operation could not be evaluated.
    
    ProvisionedThroughputExceededException - Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ItemCollectionSizeLimitExceededException - An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.
    
    TransactionConflictException - Operation was rejected because there is an ongoing transaction for the item.
    
    RequestLimitExceededException - Throughput exceeds the current throughput quota for your account. Please contact Amazon Web Services Support to request a quota increase.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateTable
```
default UpdateTableResponse updateTable(UpdateTableRequest updateTableRequest)
                                 throws ResourceInUseException,
                                        ResourceNotFoundException,
                                        LimitExceededException,
                                        InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
    
    You can only perform one of the following operations at once:
    - Modify the provisioned throughput settings of the table.
    - Remove a global secondary index from the table.
    - Create a new global secondary index on the table. After the index begins backfilling, you can use UpdateTable to perform other operations.
    UpdateTable is an asynchronous operation; while it is executing, the table status changes from ACTIVE to UPDATING. While it is UPDATING, you cannot issue another UpdateTable request. When the table returns to the ACTIVE state, the UpdateTable operation is complete.
    Parameters:
    
    updateTableRequest - Represents the input of an UpdateTable operation.
    
    Returns:
    
    Result of the UpdateTable operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateTable
```
default UpdateTableResponse updateTable(Consumer<UpdateTableRequest.Builder> updateTableRequest)
                                 throws ResourceInUseException,
                                        ResourceNotFoundException,
                                        LimitExceededException,
                                        InternalServerErrorException,
                                        AwsServiceException,
                                        SdkClientException,
                                        DynamoDbException
```
    Modifies the provisioned throughput settings, global secondary indexes, or DynamoDB Streams settings for a given table.
    
    You can only perform one of the following operations at once:
    - Modify the provisioned throughput settings of the table.
    - Remove a global secondary index from the table.
    - Create a new global secondary index on the table. After the index begins backfilling, you can use UpdateTable to perform other operations.
    UpdateTable is an asynchronous operation; while it is executing, the table status changes from ACTIVE to UPDATING. While it is UPDATING, you cannot issue another UpdateTable request. When the table returns to the ACTIVE state, the UpdateTable operation is complete.
    
    This is a convenience which creates an instance of the UpdateTableRequest.Builder avoiding the need to create one manually via UpdateTableRequest.builder()
    Parameters:
    
    updateTableRequest - A Consumer that will call methods on UpdateTableInput.Builder to create a request. Represents the input of an UpdateTable operation.
    
    Returns:
    
    Result of the UpdateTable operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateTableReplicaAutoScaling
```
default UpdateTableReplicaAutoScalingResponse updateTableReplicaAutoScaling(UpdateTableReplicaAutoScalingRequest updateTableReplicaAutoScalingRequest)
                                                                     throws ResourceNotFoundException,
                                                                            ResourceInUseException,
                                                                            LimitExceededException,
                                                                            InternalServerErrorException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            DynamoDbException
```
    Updates auto scaling settings on your global tables at once.
    
    This operation only applies to Version 2019.11.21 of global tables.
    
    Parameters:
    
    updateTableReplicaAutoScalingRequest -
    
    Returns:
    
    Result of the UpdateTableReplicaAutoScaling operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateTableReplicaAutoScaling
```
default UpdateTableReplicaAutoScalingResponse updateTableReplicaAutoScaling(Consumer<UpdateTableReplicaAutoScalingRequest.Builder> updateTableReplicaAutoScalingRequest)
                                                                     throws ResourceNotFoundException,
                                                                            ResourceInUseException,
                                                                            LimitExceededException,
                                                                            InternalServerErrorException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            DynamoDbException
```
    Updates auto scaling settings on your global tables at once.
    
    This operation only applies to Version 2019.11.21 of global tables.
    
    This is a convenience which creates an instance of the UpdateTableReplicaAutoScalingRequest.Builder avoiding the need to create one manually via UpdateTableReplicaAutoScalingRequest.builder()
    
    Parameters:
    
    updateTableReplicaAutoScalingRequest - A Consumer that will call methods on UpdateTableReplicaAutoScalingInput.Builder to create a request.
    
    Returns:
    
    Result of the UpdateTableReplicaAutoScaling operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateTimeToLive
```
default UpdateTimeToLiveResponse updateTimeToLive(UpdateTimeToLiveRequest updateTimeToLiveRequest)
                                           throws ResourceInUseException,
                                                  ResourceNotFoundException,
                                                  LimitExceededException,
                                                  InternalServerErrorException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    The UpdateTimeToLive method enables or disables Time to Live (TTL) for the specified table. A successful UpdateTimeToLive call returns the current TimeToLiveSpecification. It can take up to one hour for the change to fully process. Any additional UpdateTimeToLive calls for the same table during this one hour duration result in a ValidationException.
    
    TTL compares the current time in epoch time format to the time stored in the TTL attribute of an item. If the epoch time value stored in the attribute is less than the current time, the item is marked as expired and subsequently deleted.
    
    The epoch time format is the number of seconds elapsed since 12:00:00 AM January 1, 1970 UTC.
    
    DynamoDB deletes expired items on a best-effort basis to ensure availability of throughput for other data operations.
    
    DynamoDB typically deletes expired items within two days of expiration. The exact duration within which an item gets deleted after expiration is specific to the nature of the workload. Items that have expired and not been deleted will still show up in reads, queries, and scans.
    
    As items are deleted, they are removed from any local secondary index and global secondary index immediately in the same eventually consistent way as a standard delete operation.
    
    For more information, see Time To Live in the Amazon DynamoDB Developer Guide.
    
    Parameters:
    
    updateTimeToLiveRequest - Represents the input of an UpdateTimeToLive operation.
    
    Returns:
    
    Result of the UpdateTimeToLive operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateTimeToLive
```
default UpdateTimeToLiveResponse updateTimeToLive(Consumer<UpdateTimeToLiveRequest.Builder> updateTimeToLiveRequest)
                                           throws ResourceInUseException,
                                                  ResourceNotFoundException,
                                                  LimitExceededException,
                                                  InternalServerErrorException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  DynamoDbException
```
    The UpdateTimeToLive method enables or disables Time to Live (TTL) for the specified table. A successful UpdateTimeToLive call returns the current TimeToLiveSpecification. It can take up to one hour for the change to fully process. Any additional UpdateTimeToLive calls for the same table during this one hour duration result in a ValidationException.
    
    TTL compares the current time in epoch time format to the time stored in the TTL attribute of an item. If the epoch time value stored in the attribute is less than the current time, the item is marked as expired and subsequently deleted.
    
    The epoch time format is the number of seconds elapsed since 12:00:00 AM January 1, 1970 UTC.
    
    DynamoDB deletes expired items on a best-effort basis to ensure availability of throughput for other data operations.
    
    DynamoDB typically deletes expired items within two days of expiration. The exact duration within which an item gets deleted after expiration is specific to the nature of the workload. Items that have expired and not been deleted will still show up in reads, queries, and scans.
    
    As items are deleted, they are removed from any local secondary index and global secondary index immediately in the same eventually consistent way as a standard delete operation.
    
    For more information, see Time To Live in the Amazon DynamoDB Developer Guide.
    
    This is a convenience which creates an instance of the UpdateTimeToLiveRequest.Builder avoiding the need to create one manually via UpdateTimeToLiveRequest.builder()
    
    Parameters:
    
    updateTimeToLiveRequest - A Consumer that will call methods on UpdateTimeToLiveInput.Builder to create a request. Represents the input of an UpdateTimeToLive operation.
    
    Returns:
    
    Result of the UpdateTimeToLive operation returned by the service.
    
    Throws:
    
    ResourceInUseException - The operation conflicts with the resource's availability. For example, you attempted to recreate an existing table, or tried to delete a table currently in the CREATING state.
    
    ResourceNotFoundException - The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.
    
    LimitExceededException - There is no limit to the number of daily on-demand backups that can be taken.
    
    For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable, UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.
    
    When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.
    
    When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.
    
    There is a soft account quota of 2,500 tables.
    
    InternalServerErrorException - An error occurred on the server side.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    DynamoDbException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - waiter
```
default DynamoDbWaiter waiter()
```
    Create an instance of DynamoDbWaiter using this client.
    Waiters created via this method are managed by the SDK and resources will be released when the service client is closed.
    
    Returns:
    
    an instance of DynamoDbWaiter
  - create
```
static DynamoDbClient create()
```
    Create a DynamoDbClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
  - builder
```
static DynamoDbClientBuilder builder()
```
    Create a builder that can be used to configure and create a DynamoDbClient.
  - serviceMetadata
```
static ServiceMetadata serviceMetadata()
```

Interface DynamoDbClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Field Detail

SERVICE_NAME

SERVICE_METADATA_ID

Method Detail

batchExecuteStatement

batchExecuteStatement

batchGetItem

batchGetItem

batchGetItemPaginator

batchGetItemPaginator

batchWriteItem

batchWriteItem

createBackup

createBackup

createGlobalTable

createGlobalTable

createTable

createTable

deleteBackup

deleteBackup

deleteItem

deleteItem

deleteTable

deleteTable

describeBackup

describeBackup

describeContinuousBackups

describeContinuousBackups

describeContributorInsights

describeContributorInsights

describeEndpoints

describeEndpoints

describeEndpoints

describeExport

describeExport

describeGlobalTable

describeGlobalTable

describeGlobalTableSettings

describeGlobalTableSettings

describeImport

describeImport

describeKinesisStreamingDestination

describeKinesisStreamingDestination

describeLimits

describeLimits

describeLimits

describeTable

describeTable

describeTableReplicaAutoScaling

describeTableReplicaAutoScaling

describeTimeToLive

describeTimeToLive

disableKinesisStreamingDestination

disableKinesisStreamingDestination

enableKinesisStreamingDestination

enableKinesisStreamingDestination

executeStatement

executeStatement

executeTransaction

executeTransaction

exportTableToPointInTime

exportTableToPointInTime

getItem

getItem

importTable

importTable

listBackups

listBackups

listBackups

listContributorInsights

listContributorInsights

listContributorInsightsPaginator

listContributorInsightsPaginator

listExports

listExports