@Generated(value="software.amazon.awssdk:codegen") @ThreadSafe public interface StsClient extends SdkClient
builder() method.
Security Token Service (STS) enables you to request temporary, limited-privilege credentials for Identity and Access Management (IAM) users or for users that you authenticate (federated users). This guide provides descriptions of the STS API. For more information about using this service, see Temporary Security Credentials.
| Modifier and Type | Field and Description |
|---|---|
static String |
SERVICE_METADATA_ID
Value for looking up the service's metadata from the
ServiceMetadataProvider. |
static String |
SERVICE_NAME |
| Modifier and Type | Method and Description |
|---|---|
default AssumeRoleResponse |
assumeRole(AssumeRoleRequest assumeRoleRequest)
Returns a set of temporary security credentials that you can use to access Amazon Web Services resources that you
might not normally have access to.
|
default AssumeRoleResponse |
assumeRole(Consumer<AssumeRoleRequest.Builder> assumeRoleRequest)
Returns a set of temporary security credentials that you can use to access Amazon Web Services resources that you
might not normally have access to.
|
default AssumeRoleWithSamlResponse |
assumeRoleWithSAML(AssumeRoleWithSamlRequest assumeRoleWithSamlRequest)
Returns a set of temporary security credentials for users who have been authenticated via a SAML authentication
response.
|
default AssumeRoleWithSamlResponse |
assumeRoleWithSAML(Consumer<AssumeRoleWithSamlRequest.Builder> assumeRoleWithSamlRequest)
Returns a set of temporary security credentials for users who have been authenticated via a SAML authentication
response.
|
default AssumeRoleWithWebIdentityResponse |
assumeRoleWithWebIdentity(AssumeRoleWithWebIdentityRequest assumeRoleWithWebIdentityRequest)
Returns a set of temporary security credentials for users who have been authenticated in a mobile or web
application with a web identity provider.
|
default AssumeRoleWithWebIdentityResponse |
assumeRoleWithWebIdentity(Consumer<AssumeRoleWithWebIdentityRequest.Builder> assumeRoleWithWebIdentityRequest)
Returns a set of temporary security credentials for users who have been authenticated in a mobile or web
application with a web identity provider.
|
static StsClientBuilder |
builder()
Create a builder that can be used to configure and create a
StsClient. |
static StsClient |
create()
Create a
StsClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider. |
default DecodeAuthorizationMessageResponse |
decodeAuthorizationMessage(Consumer<DecodeAuthorizationMessageRequest.Builder> decodeAuthorizationMessageRequest)
Decodes additional information about the authorization status of a request from an encoded message returned in
response to an Amazon Web Services request.
|
default DecodeAuthorizationMessageResponse |
decodeAuthorizationMessage(DecodeAuthorizationMessageRequest decodeAuthorizationMessageRequest)
Decodes additional information about the authorization status of a request from an encoded message returned in
response to an Amazon Web Services request.
|
default GetAccessKeyInfoResponse |
getAccessKeyInfo(Consumer<GetAccessKeyInfoRequest.Builder> getAccessKeyInfoRequest)
Returns the account identifier for the specified access key ID.
|
default GetAccessKeyInfoResponse |
getAccessKeyInfo(GetAccessKeyInfoRequest getAccessKeyInfoRequest)
Returns the account identifier for the specified access key ID.
|
default GetCallerIdentityResponse |
getCallerIdentity()
Returns details about the IAM user or role whose credentials are used to call the operation.
|
default GetCallerIdentityResponse |
getCallerIdentity(Consumer<GetCallerIdentityRequest.Builder> getCallerIdentityRequest)
Returns details about the IAM user or role whose credentials are used to call the operation.
|
default GetCallerIdentityResponse |
getCallerIdentity(GetCallerIdentityRequest getCallerIdentityRequest)
Returns details about the IAM user or role whose credentials are used to call the operation.
|
default GetFederationTokenResponse |
getFederationToken(Consumer<GetFederationTokenRequest.Builder> getFederationTokenRequest)
Returns a set of temporary security credentials (consisting of an access key ID, a secret access key, and a
security token) for a federated user.
|
default GetFederationTokenResponse |
getFederationToken(GetFederationTokenRequest getFederationTokenRequest)
Returns a set of temporary security credentials (consisting of an access key ID, a secret access key, and a
security token) for a federated user.
|
default GetSessionTokenResponse |
getSessionToken()
Returns a set of temporary credentials for an Amazon Web Services account or IAM user.
|
default GetSessionTokenResponse |
getSessionToken(Consumer<GetSessionTokenRequest.Builder> getSessionTokenRequest)
Returns a set of temporary credentials for an Amazon Web Services account or IAM user.
|
default GetSessionTokenResponse |
getSessionToken(GetSessionTokenRequest getSessionTokenRequest)
Returns a set of temporary credentials for an Amazon Web Services account or IAM user.
|
static ServiceMetadata |
serviceMetadata() |
serviceNameclosestatic final String SERVICE_NAME
static final String SERVICE_METADATA_ID
ServiceMetadataProvider.static StsClient create()
StsClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider.static StsClientBuilder builder()
StsClient.default AssumeRoleResponse assumeRole(AssumeRoleRequest assumeRoleRequest) throws MalformedPolicyDocumentException, PackedPolicyTooLargeException, RegionDisabledException, ExpiredTokenException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary security credentials that you can use to access Amazon Web Services resources that you
might not normally have access to. These temporary credentials consist of an access key ID, a secret access key,
and a security token. Typically, you use AssumeRole within your account or for cross-account access.
For a comparison of AssumeRole with other API operations that produce temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
Permissions
The temporary security credentials created by AssumeRole can be used to make API calls to any Amazon
Web Services service with the following exception: You cannot call the Amazon Web Services STS
GetFederationToken or GetSessionToken API operations.
(Optional) You can pass inline or managed session policies to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.
When you create a role, you create two policies: A role trust policy that specifies who can assume the role and a permissions policy that specifies what can be done with the role. You specify the trusted principal who is allowed to assume the role in the role trust policy.
To assume a role from a different account, your Amazon Web Services account must be trusted by the role. The trust relationship is defined in the role's trust policy when the role is created. That trust policy states which accounts are allowed to delegate that access to users in the account.
A user who wants to access a role in a different account must also have permissions that are delegated from the
user account administrator. The administrator must attach a policy that allows the user to call
AssumeRole for the ARN of the role in the other account.
To allow a user to assume a role in the same account, you can do either of the following:
Attach a policy to the user that allows the user to call AssumeRole (as long as the role's trust
policy trusts the account).
Add the user as a principal directly in the role's trust policy.
You can do either because the role’s trust policy acts as an IAM resource-based policy. When a resource-based policy grants access to a principal in the same account, no additional identity-based policy is required. For more information about trust policies and resource-based policies, see IAM Policies in the IAM User Guide.
Tags
(Optional) You can pass tag key-value pairs to your session. These tags are called session tags. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.
An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.
You can set the session tags as transitive. Transitive tags persist during role chaining. For more information, see Chaining Roles with Session Tags in the IAM User Guide.
Using MFA with AssumeRole
(Optional) You can include multi-factor authentication (MFA) information when you call AssumeRole.
This is useful for cross-account scenarios to ensure that the user that assumes the role has been authenticated
with an Amazon Web Services MFA device. In that scenario, the trust policy of the role being assumed includes a
condition that tests for MFA authentication. If the caller does not include valid MFA information, the request to
assume the role is denied. The condition in a trust policy that tests for MFA authentication might look like the
following example.
"Condition": {"Bool": {"aws:MultiFactorAuthPresent": true}}
For more information, see Configuring MFA-Protected API Access in the IAM User Guide guide.
To use MFA with AssumeRole, you pass values for the SerialNumber and
TokenCode parameters. The SerialNumber value identifies the user's hardware or virtual
MFA device. The TokenCode is the time-based one-time password (TOTP) that the MFA device produces.
assumeRoleRequest - MalformedPolicyDocumentException - The request was rejected because the policy document was malformed. The error message describes the
specific error.PackedPolicyTooLargeException - The request was rejected because the total packed size of the session policies and session tags combined
was too large. An Amazon Web Services conversion compresses the session policy document, session policy
ARNs, and session tags into a packed binary format that has a separate limit. The error message indicates
by percentage how close the policies and tags are to the upper size limit. For more information, see Passing Session Tags in
STS in the IAM User Guide.
You could receive this error even though you meet other defined session policy and session tag limits. For more information, see IAM and STS Entity Character Limits in the IAM User Guide.
RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.ExpiredTokenException - The web identity token that was passed is expired or is not valid. Get a new identity token from the
identity provider and then retry the request.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault AssumeRoleResponse assumeRole(Consumer<AssumeRoleRequest.Builder> assumeRoleRequest) throws MalformedPolicyDocumentException, PackedPolicyTooLargeException, RegionDisabledException, ExpiredTokenException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary security credentials that you can use to access Amazon Web Services resources that you
might not normally have access to. These temporary credentials consist of an access key ID, a secret access key,
and a security token. Typically, you use AssumeRole within your account or for cross-account access.
For a comparison of AssumeRole with other API operations that produce temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
Permissions
The temporary security credentials created by AssumeRole can be used to make API calls to any Amazon
Web Services service with the following exception: You cannot call the Amazon Web Services STS
GetFederationToken or GetSessionToken API operations.
(Optional) You can pass inline or managed session policies to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.
When you create a role, you create two policies: A role trust policy that specifies who can assume the role and a permissions policy that specifies what can be done with the role. You specify the trusted principal who is allowed to assume the role in the role trust policy.
To assume a role from a different account, your Amazon Web Services account must be trusted by the role. The trust relationship is defined in the role's trust policy when the role is created. That trust policy states which accounts are allowed to delegate that access to users in the account.
A user who wants to access a role in a different account must also have permissions that are delegated from the
user account administrator. The administrator must attach a policy that allows the user to call
AssumeRole for the ARN of the role in the other account.
To allow a user to assume a role in the same account, you can do either of the following:
Attach a policy to the user that allows the user to call AssumeRole (as long as the role's trust
policy trusts the account).
Add the user as a principal directly in the role's trust policy.
You can do either because the role’s trust policy acts as an IAM resource-based policy. When a resource-based policy grants access to a principal in the same account, no additional identity-based policy is required. For more information about trust policies and resource-based policies, see IAM Policies in the IAM User Guide.
Tags
(Optional) You can pass tag key-value pairs to your session. These tags are called session tags. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.
An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.
You can set the session tags as transitive. Transitive tags persist during role chaining. For more information, see Chaining Roles with Session Tags in the IAM User Guide.
Using MFA with AssumeRole
(Optional) You can include multi-factor authentication (MFA) information when you call AssumeRole.
This is useful for cross-account scenarios to ensure that the user that assumes the role has been authenticated
with an Amazon Web Services MFA device. In that scenario, the trust policy of the role being assumed includes a
condition that tests for MFA authentication. If the caller does not include valid MFA information, the request to
assume the role is denied. The condition in a trust policy that tests for MFA authentication might look like the
following example.
"Condition": {"Bool": {"aws:MultiFactorAuthPresent": true}}
For more information, see Configuring MFA-Protected API Access in the IAM User Guide guide.
To use MFA with AssumeRole, you pass values for the SerialNumber and
TokenCode parameters. The SerialNumber value identifies the user's hardware or virtual
MFA device. The TokenCode is the time-based one-time password (TOTP) that the MFA device produces.
This is a convenience which creates an instance of the AssumeRoleRequest.Builder avoiding the need to
create one manually via AssumeRoleRequest.builder()
assumeRoleRequest - A Consumer that will call methods on AssumeRoleRequest.Builder to create a request.MalformedPolicyDocumentException - The request was rejected because the policy document was malformed. The error message describes the
specific error.PackedPolicyTooLargeException - The request was rejected because the total packed size of the session policies and session tags combined
was too large. An Amazon Web Services conversion compresses the session policy document, session policy
ARNs, and session tags into a packed binary format that has a separate limit. The error message indicates
by percentage how close the policies and tags are to the upper size limit. For more information, see Passing Session Tags in
STS in the IAM User Guide.
You could receive this error even though you meet other defined session policy and session tag limits. For more information, see IAM and STS Entity Character Limits in the IAM User Guide.
RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.ExpiredTokenException - The web identity token that was passed is expired or is not valid. Get a new identity token from the
identity provider and then retry the request.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault AssumeRoleWithSamlResponse assumeRoleWithSAML(AssumeRoleWithSamlRequest assumeRoleWithSamlRequest) throws MalformedPolicyDocumentException, PackedPolicyTooLargeException, IdpRejectedClaimException, InvalidIdentityTokenException, ExpiredTokenException, RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary security credentials for users who have been authenticated via a SAML authentication
response. This operation provides a mechanism for tying an enterprise identity store or directory to role-based
Amazon Web Services access without user-specific credentials or configuration. For a comparison of
AssumeRoleWithSAML with the other API operations that produce temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
The temporary security credentials returned by this operation consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to Amazon Web Services services.
Session Duration
By default, the temporary security credentials created by AssumeRoleWithSAML last for one hour.
However, you can use the optional DurationSeconds parameter to specify the duration of your session.
Your role session lasts for the duration that you specify, or until the time specified in the SAML authentication
response's SessionNotOnOrAfter value, whichever is shorter. You can provide a
DurationSeconds value from 900 seconds (15 minutes) up to the maximum session duration setting for
the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your
role, see View
the Maximum Session Duration Setting for a Role in the IAM User Guide. The maximum session duration
limit applies when you use the AssumeRole* API operations or the assume-role* CLI
commands. However the limit does not apply when you use those operations to create a console URL. For more
information, see Using IAM Roles
in the IAM User Guide.
Role chaining limits your CLI or Amazon Web Services API role session to a maximum of one hour. When you use
the AssumeRole API operation to assume a role, you can specify the duration of your role session
with the DurationSeconds parameter. You can specify a parameter value of up to 43200 seconds (12
hours), depending on the maximum session duration setting for your role. However, if you assume a role using role
chaining and provide a DurationSeconds parameter value greater than one hour, the operation fails.
Permissions
The temporary security credentials created by AssumeRoleWithSAML can be used to make API calls to
any Amazon Web Services service with the following exception: you cannot call the STS
GetFederationToken or GetSessionToken API operations.
(Optional) You can pass inline or managed session policies to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.
Calling AssumeRoleWithSAML does not require the use of Amazon Web Services security credentials. The
identity of the caller is validated by using keys in the metadata document that is uploaded for the SAML provider
entity for your identity provider.
Calling AssumeRoleWithSAML can result in an entry in your CloudTrail logs. The entry includes the
value in the NameID element of the SAML assertion. We recommend that you use a
NameIDType that is not associated with any personally identifiable information (PII). For example,
you could instead use the persistent identifier (
urn:oasis:names:tc:SAML:2.0:nameid-format:persistent).
Tags
(Optional) You can configure your IdP to pass attributes into your SAML assertion as session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.
You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.
An Amazon Web Services conversion compresses the passed session policies and session tags into a packed binary
format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other
requirements. The PackedPolicySize response element indicates by percentage how close the policies
and tags for your request are to the upper size limit.
You can pass a session tag with the same key as a tag that is attached to the role. When you do, session tags override the role's tags with the same key.
An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.
You can set the session tags as transitive. Transitive tags persist during role chaining. For more information, see Chaining Roles with Session Tags in the IAM User Guide.
SAML Configuration
Before your application can call AssumeRoleWithSAML, you must configure your SAML identity provider
(IdP) to issue the claims required by Amazon Web Services. Additionally, you must use Identity and Access
Management (IAM) to create a SAML provider entity in your Amazon Web Services account that represents your
identity provider. You must also create an IAM role that specifies this SAML provider in its trust policy.
For more information, see the following resources:
About SAML 2.0-based Federation in the IAM User Guide.
Creating SAML Identity Providers in the IAM User Guide.
Configuring a Relying Party and Claims in the IAM User Guide.
Creating a Role for SAML 2.0 Federation in the IAM User Guide.
assumeRoleWithSamlRequest - MalformedPolicyDocumentException - The request was rejected because the policy document was malformed. The error message describes the
specific error.PackedPolicyTooLargeException - The request was rejected because the total packed size of the session policies and session tags combined
was too large. An Amazon Web Services conversion compresses the session policy document, session policy
ARNs, and session tags into a packed binary format that has a separate limit. The error message indicates
by percentage how close the policies and tags are to the upper size limit. For more information, see Passing Session Tags in
STS in the IAM User Guide.
You could receive this error even though you meet other defined session policy and session tag limits. For more information, see IAM and STS Entity Character Limits in the IAM User Guide.
IdpRejectedClaimException - The identity provider (IdP) reported that authentication failed. This might be because the claim is
invalid.
If this error is returned for the AssumeRoleWithWebIdentity operation, it can also mean that
the claim has expired or has been explicitly revoked.
InvalidIdentityTokenException - The web identity token that was passed could not be validated by Amazon Web Services. Get a new identity
token from the identity provider and then retry the request.ExpiredTokenException - The web identity token that was passed is expired or is not valid. Get a new identity token from the
identity provider and then retry the request.RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault AssumeRoleWithSamlResponse assumeRoleWithSAML(Consumer<AssumeRoleWithSamlRequest.Builder> assumeRoleWithSamlRequest) throws MalformedPolicyDocumentException, PackedPolicyTooLargeException, IdpRejectedClaimException, InvalidIdentityTokenException, ExpiredTokenException, RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary security credentials for users who have been authenticated via a SAML authentication
response. This operation provides a mechanism for tying an enterprise identity store or directory to role-based
Amazon Web Services access without user-specific credentials or configuration. For a comparison of
AssumeRoleWithSAML with the other API operations that produce temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
The temporary security credentials returned by this operation consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to Amazon Web Services services.
Session Duration
By default, the temporary security credentials created by AssumeRoleWithSAML last for one hour.
However, you can use the optional DurationSeconds parameter to specify the duration of your session.
Your role session lasts for the duration that you specify, or until the time specified in the SAML authentication
response's SessionNotOnOrAfter value, whichever is shorter. You can provide a
DurationSeconds value from 900 seconds (15 minutes) up to the maximum session duration setting for
the role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your
role, see View
the Maximum Session Duration Setting for a Role in the IAM User Guide. The maximum session duration
limit applies when you use the AssumeRole* API operations or the assume-role* CLI
commands. However the limit does not apply when you use those operations to create a console URL. For more
information, see Using IAM Roles
in the IAM User Guide.
Role chaining limits your CLI or Amazon Web Services API role session to a maximum of one hour. When you use
the AssumeRole API operation to assume a role, you can specify the duration of your role session
with the DurationSeconds parameter. You can specify a parameter value of up to 43200 seconds (12
hours), depending on the maximum session duration setting for your role. However, if you assume a role using role
chaining and provide a DurationSeconds parameter value greater than one hour, the operation fails.
Permissions
The temporary security credentials created by AssumeRoleWithSAML can be used to make API calls to
any Amazon Web Services service with the following exception: you cannot call the STS
GetFederationToken or GetSessionToken API operations.
(Optional) You can pass inline or managed session policies to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.
Calling AssumeRoleWithSAML does not require the use of Amazon Web Services security credentials. The
identity of the caller is validated by using keys in the metadata document that is uploaded for the SAML provider
entity for your identity provider.
Calling AssumeRoleWithSAML can result in an entry in your CloudTrail logs. The entry includes the
value in the NameID element of the SAML assertion. We recommend that you use a
NameIDType that is not associated with any personally identifiable information (PII). For example,
you could instead use the persistent identifier (
urn:oasis:names:tc:SAML:2.0:nameid-format:persistent).
Tags
(Optional) You can configure your IdP to pass attributes into your SAML assertion as session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.
You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.
An Amazon Web Services conversion compresses the passed session policies and session tags into a packed binary
format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other
requirements. The PackedPolicySize response element indicates by percentage how close the policies
and tags for your request are to the upper size limit.
You can pass a session tag with the same key as a tag that is attached to the role. When you do, session tags override the role's tags with the same key.
An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.
You can set the session tags as transitive. Transitive tags persist during role chaining. For more information, see Chaining Roles with Session Tags in the IAM User Guide.
SAML Configuration
Before your application can call AssumeRoleWithSAML, you must configure your SAML identity provider
(IdP) to issue the claims required by Amazon Web Services. Additionally, you must use Identity and Access
Management (IAM) to create a SAML provider entity in your Amazon Web Services account that represents your
identity provider. You must also create an IAM role that specifies this SAML provider in its trust policy.
For more information, see the following resources:
About SAML 2.0-based Federation in the IAM User Guide.
Creating SAML Identity Providers in the IAM User Guide.
Configuring a Relying Party and Claims in the IAM User Guide.
Creating a Role for SAML 2.0 Federation in the IAM User Guide.
This is a convenience which creates an instance of the AssumeRoleWithSamlRequest.Builder avoiding the
need to create one manually via AssumeRoleWithSamlRequest.builder()
assumeRoleWithSamlRequest - A Consumer that will call methods on AssumeRoleWithSAMLRequest.Builder to create a
request.MalformedPolicyDocumentException - The request was rejected because the policy document was malformed. The error message describes the
specific error.PackedPolicyTooLargeException - The request was rejected because the total packed size of the session policies and session tags combined
was too large. An Amazon Web Services conversion compresses the session policy document, session policy
ARNs, and session tags into a packed binary format that has a separate limit. The error message indicates
by percentage how close the policies and tags are to the upper size limit. For more information, see Passing Session Tags in
STS in the IAM User Guide.
You could receive this error even though you meet other defined session policy and session tag limits. For more information, see IAM and STS Entity Character Limits in the IAM User Guide.
IdpRejectedClaimException - The identity provider (IdP) reported that authentication failed. This might be because the claim is
invalid.
If this error is returned for the AssumeRoleWithWebIdentity operation, it can also mean that
the claim has expired or has been explicitly revoked.
InvalidIdentityTokenException - The web identity token that was passed could not be validated by Amazon Web Services. Get a new identity
token from the identity provider and then retry the request.ExpiredTokenException - The web identity token that was passed is expired or is not valid. Get a new identity token from the
identity provider and then retry the request.RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault AssumeRoleWithWebIdentityResponse assumeRoleWithWebIdentity(AssumeRoleWithWebIdentityRequest assumeRoleWithWebIdentityRequest) throws MalformedPolicyDocumentException, PackedPolicyTooLargeException, IdpRejectedClaimException, IdpCommunicationErrorException, InvalidIdentityTokenException, ExpiredTokenException, RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary security credentials for users who have been authenticated in a mobile or web application with a web identity provider. Example providers include the OAuth 2.0 providers Login with Amazon and Facebook, or any OpenID Connect-compatible identity provider such as Google or Amazon Cognito federated identities.
For mobile applications, we recommend that you use Amazon Cognito. You can use Amazon Cognito with the Amazon Web Services SDK for iOS Developer Guide and the Amazon Web Services SDK for Android Developer Guide to uniquely identify a user. You can also supply the user with a consistent identity throughout the lifetime of an application.
To learn more about Amazon Cognito, see Amazon Cognito Overview in Amazon Web Services SDK for Android Developer Guide and Amazon Cognito Overview in the Amazon Web Services SDK for iOS Developer Guide.
Calling AssumeRoleWithWebIdentity does not require the use of Amazon Web Services security
credentials. Therefore, you can distribute an application (for example, on mobile devices) that requests
temporary security credentials without including long-term Amazon Web Services credentials in the application.
You also don't need to deploy server-based proxy services that use long-term Amazon Web Services credentials.
Instead, the identity of the caller is validated by using a token from the web identity provider. For a
comparison of AssumeRoleWithWebIdentity with the other API operations that produce temporary
credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
The temporary security credentials returned by this API consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to Amazon Web Services service API operations.
Session Duration
By default, the temporary security credentials created by AssumeRoleWithWebIdentity last for one
hour. However, you can use the optional DurationSeconds parameter to specify the duration of your
session. You can provide a value from 900 seconds (15 minutes) up to the maximum session duration setting for the
role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your
role, see View
the Maximum Session Duration Setting for a Role in the IAM User Guide. The maximum session duration
limit applies when you use the AssumeRole* API operations or the assume-role* CLI
commands. However the limit does not apply when you use those operations to create a console URL. For more
information, see Using IAM Roles
in the IAM User Guide.
Permissions
The temporary security credentials created by AssumeRoleWithWebIdentity can be used to make API
calls to any Amazon Web Services service with the following exception: you cannot call the STS
GetFederationToken or GetSessionToken API operations.
(Optional) You can pass inline or managed session policies to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.
Tags
(Optional) You can configure your IdP to pass attributes into your web identity token as session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.
You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.
An Amazon Web Services conversion compresses the passed session policies and session tags into a packed binary
format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other
requirements. The PackedPolicySize response element indicates by percentage how close the policies
and tags for your request are to the upper size limit.
You can pass a session tag with the same key as a tag that is attached to the role. When you do, the session tag overrides the role tag with the same key.
An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.
You can set the session tags as transitive. Transitive tags persist during role chaining. For more information, see Chaining Roles with Session Tags in the IAM User Guide.
Identities
Before your application can call AssumeRoleWithWebIdentity, you must have an identity token from a
supported identity provider and create a role that the application can assume. The role that your application
assumes must trust the identity provider that is associated with the identity token. In other words, the identity
provider must be specified in the role's trust policy.
Calling AssumeRoleWithWebIdentity can result in an entry in your CloudTrail logs. The entry includes
the Subject of the provided web
identity token. We recommend that you avoid using any personally identifiable information (PII) in this field.
For example, you could instead use a GUID or a pairwise identifier, as suggested in the OIDC
specification.
For more information about how to use web identity federation and the AssumeRoleWithWebIdentity API,
see the following resources:
Using Web Identity Federation API Operations for Mobile Apps and Federation Through a Web-based Identity Provider.
Web Identity Federation Playground. Walk through the process of authenticating through Login with Amazon, Facebook, or Google, getting temporary security credentials, and then using those credentials to make a request to Amazon Web Services.
Amazon Web Services SDK for iOS Developer Guide and Amazon Web Services SDK for Android Developer Guide. These toolkits contain sample apps that show how to invoke the identity providers. The toolkits then show how to use the information from these providers to get and use temporary security credentials.
Web Identity Federation with Mobile Applications. This article discusses web identity federation and shows an example of how to use web identity federation to get access to content in Amazon S3.
assumeRoleWithWebIdentityRequest - MalformedPolicyDocumentException - The request was rejected because the policy document was malformed. The error message describes the
specific error.PackedPolicyTooLargeException - The request was rejected because the total packed size of the session policies and session tags combined
was too large. An Amazon Web Services conversion compresses the session policy document, session policy
ARNs, and session tags into a packed binary format that has a separate limit. The error message indicates
by percentage how close the policies and tags are to the upper size limit. For more information, see Passing Session Tags in
STS in the IAM User Guide.
You could receive this error even though you meet other defined session policy and session tag limits. For more information, see IAM and STS Entity Character Limits in the IAM User Guide.
IdpRejectedClaimException - The identity provider (IdP) reported that authentication failed. This might be because the claim is
invalid.
If this error is returned for the AssumeRoleWithWebIdentity operation, it can also mean that
the claim has expired or has been explicitly revoked.
IdpCommunicationErrorException - The request could not be fulfilled because the identity provider (IDP) that was asked to verify the
incoming identity token could not be reached. This is often a transient error caused by network
conditions. Retry the request a limited number of times so that you don't exceed the request rate. If the
error persists, the identity provider might be down or not responding.InvalidIdentityTokenException - The web identity token that was passed could not be validated by Amazon Web Services. Get a new identity
token from the identity provider and then retry the request.ExpiredTokenException - The web identity token that was passed is expired or is not valid. Get a new identity token from the
identity provider and then retry the request.RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault AssumeRoleWithWebIdentityResponse assumeRoleWithWebIdentity(Consumer<AssumeRoleWithWebIdentityRequest.Builder> assumeRoleWithWebIdentityRequest) throws MalformedPolicyDocumentException, PackedPolicyTooLargeException, IdpRejectedClaimException, IdpCommunicationErrorException, InvalidIdentityTokenException, ExpiredTokenException, RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary security credentials for users who have been authenticated in a mobile or web application with a web identity provider. Example providers include the OAuth 2.0 providers Login with Amazon and Facebook, or any OpenID Connect-compatible identity provider such as Google or Amazon Cognito federated identities.
For mobile applications, we recommend that you use Amazon Cognito. You can use Amazon Cognito with the Amazon Web Services SDK for iOS Developer Guide and the Amazon Web Services SDK for Android Developer Guide to uniquely identify a user. You can also supply the user with a consistent identity throughout the lifetime of an application.
To learn more about Amazon Cognito, see Amazon Cognito Overview in Amazon Web Services SDK for Android Developer Guide and Amazon Cognito Overview in the Amazon Web Services SDK for iOS Developer Guide.
Calling AssumeRoleWithWebIdentity does not require the use of Amazon Web Services security
credentials. Therefore, you can distribute an application (for example, on mobile devices) that requests
temporary security credentials without including long-term Amazon Web Services credentials in the application.
You also don't need to deploy server-based proxy services that use long-term Amazon Web Services credentials.
Instead, the identity of the caller is validated by using a token from the web identity provider. For a
comparison of AssumeRoleWithWebIdentity with the other API operations that produce temporary
credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
The temporary security credentials returned by this API consist of an access key ID, a secret access key, and a security token. Applications can use these temporary security credentials to sign calls to Amazon Web Services service API operations.
Session Duration
By default, the temporary security credentials created by AssumeRoleWithWebIdentity last for one
hour. However, you can use the optional DurationSeconds parameter to specify the duration of your
session. You can provide a value from 900 seconds (15 minutes) up to the maximum session duration setting for the
role. This setting can have a value from 1 hour to 12 hours. To learn how to view the maximum value for your
role, see View
the Maximum Session Duration Setting for a Role in the IAM User Guide. The maximum session duration
limit applies when you use the AssumeRole* API operations or the assume-role* CLI
commands. However the limit does not apply when you use those operations to create a console URL. For more
information, see Using IAM Roles
in the IAM User Guide.
Permissions
The temporary security credentials created by AssumeRoleWithWebIdentity can be used to make API
calls to any Amazon Web Services service with the following exception: you cannot call the STS
GetFederationToken or GetSessionToken API operations.
(Optional) You can pass inline or managed session policies to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. Passing policies to this operation returns new temporary credentials. The resulting session's permissions are the intersection of the role's identity-based policy and the session policies. You can use the role's temporary credentials in subsequent Amazon Web Services API calls to access resources in the account that owns the role. You cannot use session policies to grant more permissions than those allowed by the identity-based policy of the role that is being assumed. For more information, see Session Policies in the IAM User Guide.
Tags
(Optional) You can configure your IdP to pass attributes into your web identity token as session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.
You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.
An Amazon Web Services conversion compresses the passed session policies and session tags into a packed binary
format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other
requirements. The PackedPolicySize response element indicates by percentage how close the policies
and tags for your request are to the upper size limit.
You can pass a session tag with the same key as a tag that is attached to the role. When you do, the session tag overrides the role tag with the same key.
An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.
You can set the session tags as transitive. Transitive tags persist during role chaining. For more information, see Chaining Roles with Session Tags in the IAM User Guide.
Identities
Before your application can call AssumeRoleWithWebIdentity, you must have an identity token from a
supported identity provider and create a role that the application can assume. The role that your application
assumes must trust the identity provider that is associated with the identity token. In other words, the identity
provider must be specified in the role's trust policy.
Calling AssumeRoleWithWebIdentity can result in an entry in your CloudTrail logs. The entry includes
the Subject of the provided web
identity token. We recommend that you avoid using any personally identifiable information (PII) in this field.
For example, you could instead use a GUID or a pairwise identifier, as suggested in the OIDC
specification.
For more information about how to use web identity federation and the AssumeRoleWithWebIdentity API,
see the following resources:
Using Web Identity Federation API Operations for Mobile Apps and Federation Through a Web-based Identity Provider.
Web Identity Federation Playground. Walk through the process of authenticating through Login with Amazon, Facebook, or Google, getting temporary security credentials, and then using those credentials to make a request to Amazon Web Services.
Amazon Web Services SDK for iOS Developer Guide and Amazon Web Services SDK for Android Developer Guide. These toolkits contain sample apps that show how to invoke the identity providers. The toolkits then show how to use the information from these providers to get and use temporary security credentials.
Web Identity Federation with Mobile Applications. This article discusses web identity federation and shows an example of how to use web identity federation to get access to content in Amazon S3.
This is a convenience which creates an instance of the AssumeRoleWithWebIdentityRequest.Builder avoiding
the need to create one manually via AssumeRoleWithWebIdentityRequest.builder()
assumeRoleWithWebIdentityRequest - A Consumer that will call methods on AssumeRoleWithWebIdentityRequest.Builder to create a
request.MalformedPolicyDocumentException - The request was rejected because the policy document was malformed. The error message describes the
specific error.PackedPolicyTooLargeException - The request was rejected because the total packed size of the session policies and session tags combined
was too large. An Amazon Web Services conversion compresses the session policy document, session policy
ARNs, and session tags into a packed binary format that has a separate limit. The error message indicates
by percentage how close the policies and tags are to the upper size limit. For more information, see Passing Session Tags in
STS in the IAM User Guide.
You could receive this error even though you meet other defined session policy and session tag limits. For more information, see IAM and STS Entity Character Limits in the IAM User Guide.
IdpRejectedClaimException - The identity provider (IdP) reported that authentication failed. This might be because the claim is
invalid.
If this error is returned for the AssumeRoleWithWebIdentity operation, it can also mean that
the claim has expired or has been explicitly revoked.
IdpCommunicationErrorException - The request could not be fulfilled because the identity provider (IDP) that was asked to verify the
incoming identity token could not be reached. This is often a transient error caused by network
conditions. Retry the request a limited number of times so that you don't exceed the request rate. If the
error persists, the identity provider might be down or not responding.InvalidIdentityTokenException - The web identity token that was passed could not be validated by Amazon Web Services. Get a new identity
token from the identity provider and then retry the request.ExpiredTokenException - The web identity token that was passed is expired or is not valid. Get a new identity token from the
identity provider and then retry the request.RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault DecodeAuthorizationMessageResponse decodeAuthorizationMessage(DecodeAuthorizationMessageRequest decodeAuthorizationMessageRequest) throws InvalidAuthorizationMessageException, AwsServiceException, SdkClientException, StsException
Decodes additional information about the authorization status of a request from an encoded message returned in response to an Amazon Web Services request.
For example, if a user is not authorized to perform an operation that he or she has requested, the request
returns a Client.UnauthorizedOperation response (an HTTP 403 response). Some Amazon Web Services
operations additionally return an encoded message that can provide details about this authorization failure.
Only certain Amazon Web Services operations return an encoded authorization message. The documentation for an individual operation indicates whether that operation returns an encoded message in addition to returning an HTTP code.
The message is encoded because the details of the authorization status can contain privileged information that
the user who requested the operation should not see. To decode an authorization status message, a user must be
granted permissions through an IAM policy to request the
DecodeAuthorizationMessage (sts:DecodeAuthorizationMessage) action.
The decoded message includes the following type of information:
Whether the request was denied due to an explicit deny or due to the absence of an explicit allow. For more information, see Determining Whether a Request is Allowed or Denied in the IAM User Guide.
The principal who made the request.
The requested action.
The requested resource.
The values of condition keys in the context of the user's request.
decodeAuthorizationMessageRequest - InvalidAuthorizationMessageException - The error returned if the message passed to DecodeAuthorizationMessage was invalid. This can
happen if the token contains invalid characters, such as linebreaks.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault DecodeAuthorizationMessageResponse decodeAuthorizationMessage(Consumer<DecodeAuthorizationMessageRequest.Builder> decodeAuthorizationMessageRequest) throws InvalidAuthorizationMessageException, AwsServiceException, SdkClientException, StsException
Decodes additional information about the authorization status of a request from an encoded message returned in response to an Amazon Web Services request.
For example, if a user is not authorized to perform an operation that he or she has requested, the request
returns a Client.UnauthorizedOperation response (an HTTP 403 response). Some Amazon Web Services
operations additionally return an encoded message that can provide details about this authorization failure.
Only certain Amazon Web Services operations return an encoded authorization message. The documentation for an individual operation indicates whether that operation returns an encoded message in addition to returning an HTTP code.
The message is encoded because the details of the authorization status can contain privileged information that
the user who requested the operation should not see. To decode an authorization status message, a user must be
granted permissions through an IAM policy to request the
DecodeAuthorizationMessage (sts:DecodeAuthorizationMessage) action.
The decoded message includes the following type of information:
Whether the request was denied due to an explicit deny or due to the absence of an explicit allow. For more information, see Determining Whether a Request is Allowed or Denied in the IAM User Guide.
The principal who made the request.
The requested action.
The requested resource.
The values of condition keys in the context of the user's request.
This is a convenience which creates an instance of the DecodeAuthorizationMessageRequest.Builder avoiding
the need to create one manually via DecodeAuthorizationMessageRequest.builder()
decodeAuthorizationMessageRequest - A Consumer that will call methods on DecodeAuthorizationMessageRequest.Builder to create a
request.InvalidAuthorizationMessageException - The error returned if the message passed to DecodeAuthorizationMessage was invalid. This can
happen if the token contains invalid characters, such as linebreaks.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault GetAccessKeyInfoResponse getAccessKeyInfo(GetAccessKeyInfoRequest getAccessKeyInfoRequest) throws AwsServiceException, SdkClientException, StsException
Returns the account identifier for the specified access key ID.
Access keys consist of two parts: an access key ID (for example, AKIAIOSFODNN7EXAMPLE) and a secret
access key (for example, wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY). For more information about
access keys, see Managing Access Keys for
IAM Users in the IAM User Guide.
When you pass an access key ID to this operation, it returns the ID of the Amazon Web Services account to which
the keys belong. Access key IDs beginning with AKIA are long-term credentials for an IAM user or the
Amazon Web Services account root user. Access key IDs beginning with ASIA are temporary credentials
that are created using STS operations. If the account in the response belongs to you, you can sign in as the root
user and review your root user access keys. Then, you can pull a credentials report
to learn which IAM user owns the keys. To learn who requested the temporary credentials for an ASIA
access key, view the STS events in your CloudTrail logs in the
IAM User Guide.
This operation does not indicate the state of the access key. The key might be active, inactive, or deleted. Active keys might not have permissions to perform an operation. Providing a deleted access key might return an error that the key doesn't exist.
getAccessKeyInfoRequest - SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault GetAccessKeyInfoResponse getAccessKeyInfo(Consumer<GetAccessKeyInfoRequest.Builder> getAccessKeyInfoRequest) throws AwsServiceException, SdkClientException, StsException
Returns the account identifier for the specified access key ID.
Access keys consist of two parts: an access key ID (for example, AKIAIOSFODNN7EXAMPLE) and a secret
access key (for example, wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY). For more information about
access keys, see Managing Access Keys for
IAM Users in the IAM User Guide.
When you pass an access key ID to this operation, it returns the ID of the Amazon Web Services account to which
the keys belong. Access key IDs beginning with AKIA are long-term credentials for an IAM user or the
Amazon Web Services account root user. Access key IDs beginning with ASIA are temporary credentials
that are created using STS operations. If the account in the response belongs to you, you can sign in as the root
user and review your root user access keys. Then, you can pull a credentials report
to learn which IAM user owns the keys. To learn who requested the temporary credentials for an ASIA
access key, view the STS events in your CloudTrail logs in the
IAM User Guide.
This operation does not indicate the state of the access key. The key might be active, inactive, or deleted. Active keys might not have permissions to perform an operation. Providing a deleted access key might return an error that the key doesn't exist.
This is a convenience which creates an instance of the GetAccessKeyInfoRequest.Builder avoiding the need
to create one manually via GetAccessKeyInfoRequest.builder()
getAccessKeyInfoRequest - A Consumer that will call methods on GetAccessKeyInfoRequest.Builder to create a request.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault GetCallerIdentityResponse getCallerIdentity() throws AwsServiceException, SdkClientException, StsException
Returns details about the IAM user or role whose credentials are used to call the operation.
No permissions are required to perform this operation. If an administrator adds a policy to your IAM user or role
that explicitly denies access to the sts:GetCallerIdentity action, you can still perform this
operation. Permissions are not required because the same information is returned when an IAM user or role is
denied access. To view an example response, see I Am Not Authorized to Perform: iam:DeleteVirtualMFADevice in the IAM User Guide.
SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiongetCallerIdentity(GetCallerIdentityRequest),
AWS API
Documentationdefault GetCallerIdentityResponse getCallerIdentity(GetCallerIdentityRequest getCallerIdentityRequest) throws AwsServiceException, SdkClientException, StsException
Returns details about the IAM user or role whose credentials are used to call the operation.
No permissions are required to perform this operation. If an administrator adds a policy to your IAM user or role
that explicitly denies access to the sts:GetCallerIdentity action, you can still perform this
operation. Permissions are not required because the same information is returned when an IAM user or role is
denied access. To view an example response, see I Am Not Authorized to Perform: iam:DeleteVirtualMFADevice in the IAM User Guide.
getCallerIdentityRequest - SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault GetCallerIdentityResponse getCallerIdentity(Consumer<GetCallerIdentityRequest.Builder> getCallerIdentityRequest) throws AwsServiceException, SdkClientException, StsException
Returns details about the IAM user or role whose credentials are used to call the operation.
No permissions are required to perform this operation. If an administrator adds a policy to your IAM user or role
that explicitly denies access to the sts:GetCallerIdentity action, you can still perform this
operation. Permissions are not required because the same information is returned when an IAM user or role is
denied access. To view an example response, see I Am Not Authorized to Perform: iam:DeleteVirtualMFADevice in the IAM User Guide.
This is a convenience which creates an instance of the GetCallerIdentityRequest.Builder avoiding the need
to create one manually via GetCallerIdentityRequest.builder()
getCallerIdentityRequest - A Consumer that will call methods on GetCallerIdentityRequest.Builder to create a request.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault GetFederationTokenResponse getFederationToken(GetFederationTokenRequest getFederationTokenRequest) throws MalformedPolicyDocumentException, PackedPolicyTooLargeException, RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary security credentials (consisting of an access key ID, a secret access key, and a
security token) for a federated user. A typical use is in a proxy application that gets temporary security
credentials on behalf of distributed applications inside a corporate network. You must call the
GetFederationToken operation using the long-term security credentials of an IAM user. As a result,
this call is appropriate in contexts where those credentials can be safely stored, usually in a server-based
application. For a comparison of GetFederationToken with the other API operations that produce
temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
You can create a mobile-based or browser-based app that can authenticate users using a web identity provider like
Login with Amazon, Facebook, Google, or an OpenID Connect-compatible identity provider. In this case, we
recommend that you use Amazon Cognito or
AssumeRoleWithWebIdentity. For more information, see Federation Through a Web-based Identity Provider in the IAM User Guide.
You can also call GetFederationToken using the security credentials of an Amazon Web Services
account root user, but we do not recommend it. Instead, we recommend that you create an IAM user for the purpose
of the proxy application. Then attach a policy to the IAM user that limits federated users to only the actions
and resources that they need to access. For more information, see IAM Best Practices in the IAM
User Guide.
Session duration
The temporary credentials are valid for the specified duration, from 900 seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours). The default session duration is 43,200 seconds (12 hours). Temporary credentials obtained by using the Amazon Web Services account root user credentials have a maximum duration of 3,600 seconds (1 hour).
Permissions
You can use the temporary credentials created by GetFederationToken in any Amazon Web Services
service except the following:
You cannot call any IAM operations using the CLI or the Amazon Web Services API.
You cannot call any STS operations except GetCallerIdentity.
You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters.
Though the session policy parameters are optional, if you do not pass a policy, then the resulting federated user
session has no permissions. When you pass session policies, the session permissions are the intersection of the
IAM user policies and the session policies that you pass. This gives you a way to further restrict the
permissions for a federated user. You cannot use session policies to grant more permissions than those that are
defined in the permissions policy of the IAM user. For more information, see Session
Policies in the IAM User Guide. For information about using GetFederationToken to create
temporary security credentials, see GetFederationToken—Federation Through a Custom Identity Broker.
You can use the credentials to access a resource that has a resource-based policy. If that policy specifically
references the federated user session in the Principal element of the policy, the session has the
permissions allowed by the policy. These permissions are granted in addition to the permissions granted by the
session policies.
Tags
(Optional) You can pass tag key-value pairs to your session. These are called session tags. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.
You can create a mobile-based or browser-based app that can authenticate users using a web identity provider like
Login with Amazon, Facebook, Google, or an OpenID Connect-compatible identity provider. In this case, we
recommend that you use Amazon Cognito or
AssumeRoleWithWebIdentity. For more information, see Federation Through a Web-based Identity Provider in the IAM User Guide.
An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.
Tag key–value pairs are not case sensitive, but case is preserved. This means that you cannot have separate
Department and department tag keys. Assume that the user that you are federating has
the Department=Marketing tag and you pass the department=
engineering session tag. Department and department are not saved as
separate tags, and the session tag passed in the request takes precedence over the user tag.
getFederationTokenRequest - MalformedPolicyDocumentException - The request was rejected because the policy document was malformed. The error message describes the
specific error.PackedPolicyTooLargeException - The request was rejected because the total packed size of the session policies and session tags combined
was too large. An Amazon Web Services conversion compresses the session policy document, session policy
ARNs, and session tags into a packed binary format that has a separate limit. The error message indicates
by percentage how close the policies and tags are to the upper size limit. For more information, see Passing Session Tags in
STS in the IAM User Guide.
You could receive this error even though you meet other defined session policy and session tag limits. For more information, see IAM and STS Entity Character Limits in the IAM User Guide.
RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault GetFederationTokenResponse getFederationToken(Consumer<GetFederationTokenRequest.Builder> getFederationTokenRequest) throws MalformedPolicyDocumentException, PackedPolicyTooLargeException, RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary security credentials (consisting of an access key ID, a secret access key, and a
security token) for a federated user. A typical use is in a proxy application that gets temporary security
credentials on behalf of distributed applications inside a corporate network. You must call the
GetFederationToken operation using the long-term security credentials of an IAM user. As a result,
this call is appropriate in contexts where those credentials can be safely stored, usually in a server-based
application. For a comparison of GetFederationToken with the other API operations that produce
temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
You can create a mobile-based or browser-based app that can authenticate users using a web identity provider like
Login with Amazon, Facebook, Google, or an OpenID Connect-compatible identity provider. In this case, we
recommend that you use Amazon Cognito or
AssumeRoleWithWebIdentity. For more information, see Federation Through a Web-based Identity Provider in the IAM User Guide.
You can also call GetFederationToken using the security credentials of an Amazon Web Services
account root user, but we do not recommend it. Instead, we recommend that you create an IAM user for the purpose
of the proxy application. Then attach a policy to the IAM user that limits federated users to only the actions
and resources that they need to access. For more information, see IAM Best Practices in the IAM
User Guide.
Session duration
The temporary credentials are valid for the specified duration, from 900 seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours). The default session duration is 43,200 seconds (12 hours). Temporary credentials obtained by using the Amazon Web Services account root user credentials have a maximum duration of 3,600 seconds (1 hour).
Permissions
You can use the temporary credentials created by GetFederationToken in any Amazon Web Services
service except the following:
You cannot call any IAM operations using the CLI or the Amazon Web Services API.
You cannot call any STS operations except GetCallerIdentity.
You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policies to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters.
Though the session policy parameters are optional, if you do not pass a policy, then the resulting federated user
session has no permissions. When you pass session policies, the session permissions are the intersection of the
IAM user policies and the session policies that you pass. This gives you a way to further restrict the
permissions for a federated user. You cannot use session policies to grant more permissions than those that are
defined in the permissions policy of the IAM user. For more information, see Session
Policies in the IAM User Guide. For information about using GetFederationToken to create
temporary security credentials, see GetFederationToken—Federation Through a Custom Identity Broker.
You can use the credentials to access a resource that has a resource-based policy. If that policy specifically
references the federated user session in the Principal element of the policy, the session has the
permissions allowed by the policy. These permissions are granted in addition to the permissions granted by the
session policies.
Tags
(Optional) You can pass tag key-value pairs to your session. These are called session tags. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.
You can create a mobile-based or browser-based app that can authenticate users using a web identity provider like
Login with Amazon, Facebook, Google, or an OpenID Connect-compatible identity provider. In this case, we
recommend that you use Amazon Cognito or
AssumeRoleWithWebIdentity. For more information, see Federation Through a Web-based Identity Provider in the IAM User Guide.
An administrator must grant you the permissions necessary to pass session tags. The administrator can also create granular permissions to allow you to pass only specific session tags. For more information, see Tutorial: Using Tags for Attribute-Based Access Control in the IAM User Guide.
Tag key–value pairs are not case sensitive, but case is preserved. This means that you cannot have separate
Department and department tag keys. Assume that the user that you are federating has
the Department=Marketing tag and you pass the department=
engineering session tag. Department and department are not saved as
separate tags, and the session tag passed in the request takes precedence over the user tag.
This is a convenience which creates an instance of the GetFederationTokenRequest.Builder avoiding the
need to create one manually via GetFederationTokenRequest.builder()
getFederationTokenRequest - A Consumer that will call methods on GetFederationTokenRequest.Builder to create a
request.MalformedPolicyDocumentException - The request was rejected because the policy document was malformed. The error message describes the
specific error.PackedPolicyTooLargeException - The request was rejected because the total packed size of the session policies and session tags combined
was too large. An Amazon Web Services conversion compresses the session policy document, session policy
ARNs, and session tags into a packed binary format that has a separate limit. The error message indicates
by percentage how close the policies and tags are to the upper size limit. For more information, see Passing Session Tags in
STS in the IAM User Guide.
You could receive this error even though you meet other defined session policy and session tag limits. For more information, see IAM and STS Entity Character Limits in the IAM User Guide.
RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault GetSessionTokenResponse getSessionToken() throws RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary credentials for an Amazon Web Services account or IAM user. The credentials consist of
an access key ID, a secret access key, and a security token. Typically, you use GetSessionToken if
you want to use MFA to protect programmatic calls to specific Amazon Web Services API operations like Amazon EC2
StopInstances. MFA-enabled IAM users would need to call GetSessionToken and submit an
MFA code that is associated with their MFA device. Using the temporary security credentials that are returned
from the call, IAM users can then make programmatic calls to API operations that require MFA authentication. If
you do not supply a correct MFA code, then the API returns an access denied error. For a comparison of
GetSessionToken with the other API operations that produce temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
No permissions are required for users to perform this operation. The purpose of the
sts:GetSessionToken operation is to authenticate the user using MFA. You cannot use policies to
control authentication operations. For more information, see Permissions for GetSessionToken in the IAM User Guide.
Session Duration
The GetSessionToken operation must be called by using the long-term Amazon Web Services security
credentials of the Amazon Web Services account root user or an IAM user. Credentials that are created by IAM
users are valid for the duration that you specify. This duration can range from 900 seconds (15 minutes) up to a
maximum of 129,600 seconds (36 hours), with a default of 43,200 seconds (12 hours). Credentials based on account
credentials can range from 900 seconds (15 minutes) up to 3,600 seconds (1 hour), with a default of 1 hour.
Permissions
The temporary security credentials created by GetSessionToken can be used to make API calls to any
Amazon Web Services service with the following exceptions:
You cannot call any IAM API operations unless MFA authentication information is included in the request.
You cannot call any STS API except AssumeRole or GetCallerIdentity.
We recommend that you do not call GetSessionToken with Amazon Web Services account root user
credentials. Instead, follow our best practices
by creating one or more IAM users, giving them the necessary permissions, and using IAM users for everyday
interaction with Amazon Web Services.
The credentials that are returned by GetSessionToken are based on permissions associated with the
user whose credentials were used to call the operation. If GetSessionToken is called using Amazon
Web Services account root user credentials, the temporary credentials have root user permissions. Similarly, if
GetSessionToken is called using the credentials of an IAM user, the temporary credentials have the
same permissions as the IAM user.
For more information about using GetSessionToken to create temporary credentials, go to Temporary Credentials for Users in Untrusted Environments in the IAM User Guide.
RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiongetSessionToken(GetSessionTokenRequest),
AWS API
Documentationdefault GetSessionTokenResponse getSessionToken(GetSessionTokenRequest getSessionTokenRequest) throws RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary credentials for an Amazon Web Services account or IAM user. The credentials consist of
an access key ID, a secret access key, and a security token. Typically, you use GetSessionToken if
you want to use MFA to protect programmatic calls to specific Amazon Web Services API operations like Amazon EC2
StopInstances. MFA-enabled IAM users would need to call GetSessionToken and submit an
MFA code that is associated with their MFA device. Using the temporary security credentials that are returned
from the call, IAM users can then make programmatic calls to API operations that require MFA authentication. If
you do not supply a correct MFA code, then the API returns an access denied error. For a comparison of
GetSessionToken with the other API operations that produce temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
No permissions are required for users to perform this operation. The purpose of the
sts:GetSessionToken operation is to authenticate the user using MFA. You cannot use policies to
control authentication operations. For more information, see Permissions for GetSessionToken in the IAM User Guide.
Session Duration
The GetSessionToken operation must be called by using the long-term Amazon Web Services security
credentials of the Amazon Web Services account root user or an IAM user. Credentials that are created by IAM
users are valid for the duration that you specify. This duration can range from 900 seconds (15 minutes) up to a
maximum of 129,600 seconds (36 hours), with a default of 43,200 seconds (12 hours). Credentials based on account
credentials can range from 900 seconds (15 minutes) up to 3,600 seconds (1 hour), with a default of 1 hour.
Permissions
The temporary security credentials created by GetSessionToken can be used to make API calls to any
Amazon Web Services service with the following exceptions:
You cannot call any IAM API operations unless MFA authentication information is included in the request.
You cannot call any STS API except AssumeRole or GetCallerIdentity.
We recommend that you do not call GetSessionToken with Amazon Web Services account root user
credentials. Instead, follow our best practices
by creating one or more IAM users, giving them the necessary permissions, and using IAM users for everyday
interaction with Amazon Web Services.
The credentials that are returned by GetSessionToken are based on permissions associated with the
user whose credentials were used to call the operation. If GetSessionToken is called using Amazon
Web Services account root user credentials, the temporary credentials have root user permissions. Similarly, if
GetSessionToken is called using the credentials of an IAM user, the temporary credentials have the
same permissions as the IAM user.
For more information about using GetSessionToken to create temporary credentials, go to Temporary Credentials for Users in Untrusted Environments in the IAM User Guide.
getSessionTokenRequest - RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptiondefault GetSessionTokenResponse getSessionToken(Consumer<GetSessionTokenRequest.Builder> getSessionTokenRequest) throws RegionDisabledException, AwsServiceException, SdkClientException, StsException
Returns a set of temporary credentials for an Amazon Web Services account or IAM user. The credentials consist of
an access key ID, a secret access key, and a security token. Typically, you use GetSessionToken if
you want to use MFA to protect programmatic calls to specific Amazon Web Services API operations like Amazon EC2
StopInstances. MFA-enabled IAM users would need to call GetSessionToken and submit an
MFA code that is associated with their MFA device. Using the temporary security credentials that are returned
from the call, IAM users can then make programmatic calls to API operations that require MFA authentication. If
you do not supply a correct MFA code, then the API returns an access denied error. For a comparison of
GetSessionToken with the other API operations that produce temporary credentials, see Requesting Temporary
Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
No permissions are required for users to perform this operation. The purpose of the
sts:GetSessionToken operation is to authenticate the user using MFA. You cannot use policies to
control authentication operations. For more information, see Permissions for GetSessionToken in the IAM User Guide.
Session Duration
The GetSessionToken operation must be called by using the long-term Amazon Web Services security
credentials of the Amazon Web Services account root user or an IAM user. Credentials that are created by IAM
users are valid for the duration that you specify. This duration can range from 900 seconds (15 minutes) up to a
maximum of 129,600 seconds (36 hours), with a default of 43,200 seconds (12 hours). Credentials based on account
credentials can range from 900 seconds (15 minutes) up to 3,600 seconds (1 hour), with a default of 1 hour.
Permissions
The temporary security credentials created by GetSessionToken can be used to make API calls to any
Amazon Web Services service with the following exceptions:
You cannot call any IAM API operations unless MFA authentication information is included in the request.
You cannot call any STS API except AssumeRole or GetCallerIdentity.
We recommend that you do not call GetSessionToken with Amazon Web Services account root user
credentials. Instead, follow our best practices
by creating one or more IAM users, giving them the necessary permissions, and using IAM users for everyday
interaction with Amazon Web Services.
The credentials that are returned by GetSessionToken are based on permissions associated with the
user whose credentials were used to call the operation. If GetSessionToken is called using Amazon
Web Services account root user credentials, the temporary credentials have root user permissions. Similarly, if
GetSessionToken is called using the credentials of an IAM user, the temporary credentials have the
same permissions as the IAM user.
For more information about using GetSessionToken to create temporary credentials, go to Temporary Credentials for Users in Untrusted Environments in the IAM User Guide.
This is a convenience which creates an instance of the GetSessionTokenRequest.Builder avoiding the need
to create one manually via GetSessionTokenRequest.builder()
getSessionTokenRequest - A Consumer that will call methods on GetSessionTokenRequest.Builder to create a request.RegionDisabledException - STS is not activated in the requested region for the account that is being asked to generate credentials.
The account administrator must use the IAM console to activate STS in that region. For more information,
see
Activating and Deactivating Amazon Web Services STS in an Amazon Web Services Region in the IAM
User Guide.SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for
catch all scenarios.SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.StsException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.AwsServiceExceptionstatic ServiceMetadata serviceMetadata()
Copyright © 2022. All rights reserved.