object character
This module contains many parsers to do with reading one or more characters. Almost every parser will need something from this module.
In particular, this module contains: combinators that can read specific characters; combinators that represent character classes and their negations; combinators for reading specific strings; as well as a selection of pre-made parsers to parse specific kinds of character, like digits and letters.
- Source
- character.scala
- Since
2.2.0
- Grouped
- Alphabetic
- By Inheritance
- character
- AnyRef
- Any
- Hide All
- Show All
- Public
- Protected
Value Members
- final def !=(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
- final def ##: Int
- Definition Classes
- AnyRef → Any
- final def ==(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
- final def asInstanceOf[T0]: T0
- Definition Classes
- Any
- val bit: Parsley[Char]
This parser tries to parse a bit and returns it if successful.
This parser tries to parse a bit and returns it if successful.
A bit (binary digit) is either
'0'
or'1'
. - def char(c: Char): Parsley[Char]
This combinator tries to parse a single specific character
c
from the input.This combinator tries to parse a single specific character
c
from the input.Attempts to read the given character
c
from the input stream at the current position. If this character can be found, it is consumed and returned. Otherwise, no input is consumed and this combinator will fail.- c
the character to parse
- returns
a parser that tries to read a single
c
, or fails.
scala> import parsley.character.char scala> char('a').parse("") val res0 = Failure(..) scala> char('a').parse("a") val res1 = Success('a') scala> char('a').parse("ba") val res2 = Failure(..)
- Note
this combinator can only handle 16-bit characters: for larger codepoints, consider using
string
.
Example: - def clone(): AnyRef
- Attributes
- protected[lang]
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.CloneNotSupportedException]) @native()
- val crlf: Parsley[Char]
This parser tries to parse a
CRLF
newline character pair, returning'\n'
if successful.This parser tries to parse a
CRLF
newline character pair, returning'\n'
if successful.A
CRLF
character is the pair of carriage return ('\r'
) and line feed ('\n'
). These two characters will be parsed together or not at all. The parser is made atomic usingattempt
. - val digit: Parsley[Char]
This parser tries to parse a digit, and returns it if successful.
This parser tries to parse a digit, and returns it if successful.
A digit is any character
c <= '\uFFFF'
whose Unicode Category Type is Decimal Number (Nd
). Examples of (inclusive) ranges within this category include:- the Latin digits
'0'
through'9'
- the Arabic-Indic digits
'\u0660'
through'\u0669'
- the Extended Arabic-Indic digits
'\u06F0'
through'\u06F9'
- the Devangari digits
'\u0966'
through'\u096F'
- the Fullwidth digits
'\uFF10'
through'\uFF19'
The full list of codepoints found in a category can be found in the Unicode Character Database.
- the Latin digits
- val endOfLine: Parsley[Char]
This parser will parse either a line feed (
LF
) or aCRLF
newline, returning'\n'
if successful.This parser will parse either a line feed (
LF
) or aCRLF
newline, returning'\n'
if successful.- See also
- final def eq(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
- def equals(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef → Any
- def finalize(): Unit
- Attributes
- protected[lang]
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.Throwable])
- final def getClass(): Class[_ <: AnyRef]
- Definition Classes
- AnyRef → Any
- Annotations
- @native()
- def hashCode(): Int
- Definition Classes
- AnyRef → Any
- Annotations
- @native()
- val hexDigit: Parsley[Char]
This parser tries to parse a hexadecimal digit, and returns it if successful.
This parser tries to parse a hexadecimal digit, and returns it if successful.
A hexadecimal digit is one of (all inclusive ranges):
- the digits
'0'
through'9'
- the letters
'a'
through'f'
- the letters
'A'
through'Z'
- See also
- the digits
- def isHexDigit(c: Char): Boolean
This function returns true if a character is a hexadecimal digit.
This function returns true if a character is a hexadecimal digit.
A hexadecimal digit is one of (all inclusive ranges):
- the digits
'0'
through'9'
- the letters
'a'
through'f'
- the letters
'A'
through'Z'
- See also
- the digits
- final def isInstanceOf[T0]: Boolean
- Definition Classes
- Any
- def isOctDigit(c: Char): Boolean
This function returns true if a character is an octal digit.
This function returns true if a character is an octal digit.
An octal digit is one of
'0'
to'7'
(inclusive).- See also
- def isSpace(c: Char): Boolean
This function returns true if a character is either a space or a tab character.
This function returns true if a character is either a space or a tab character.
- See also
- def isWhitespace(c: Char): Boolean
This function returns true if a character is a whitespace character.
This function returns true if a character is a whitespace character.
A whitespace character is one of:
- a space (
' '
) - a tab (
'\t'
) - a line feed (
'\n'
) - a carriage return (
'\r'
) - a form feed (
'\f'
) - a vertical tab (
'\u000B'
)
- See also
- a space (
- val item: Parsley[Char]
This parser will parse any single character from the input, failing if there is no input remaining.
This parser will parse any single character from the input, failing if there is no input remaining.
- Note
this combinator can only handle 16-bit characters.
- val letter: Parsley[Char]
This parser tries to parse a letter, and returns it if successful.
This parser tries to parse a letter, and returns it if successful.
A letter is any character
c <= '\uFFFF'
whose Unicode Category Type is any of the following:- Uppercase Letter (
Lu
) - Lowercase Letter (
Ll
) - Titlecase Letter (
Lt
) - Modifier Letter (
Lm
) - Other Letter (
Lo
)
The full list of codepoints found in a category can be found in the Unicode Character Database.
- Uppercase Letter (
- val letterOrDigit: Parsley[Char]
This parser tries to parse either a letter or a digit, and returns it if successful.
- val lower: Parsley[Char]
This parser tries to parse a lowercase letter, and returns it if successful.
This parser tries to parse a lowercase letter, and returns it if successful.
A lowercase letter is any character
c <= '\uFFFF'
whose Unicode Category Type is Lowercase Letter (Ll
). Examples of characters within this category include:- the Latin letters
'a'
through'z'
- Latin special character such as
'é'
,'ß'
,'ð'
- Cryillic letters
- Greek letters
- Coptic letters
The full list of codepoints found in a category can be found in the Unicode Character Database.
- the Latin letters
- final def ne(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
- val newline: Parsley[Char]
This parser tries to parse a line feed newline (
'\n'
) character, and returns it if successful.This parser tries to parse a line feed newline (
'\n'
) character, and returns it if successful.This parser will not accept a carriage return (
CR
) character orCRLF
. - def noneOf(cs: NumericRange[Char]): Parsley[Char]
This combinator tries to parse any character not from supplied set of characters
cs
, returning it if successful.This combinator tries to parse any character not from supplied set of characters
cs
, returning it if successful.If the next character in the input is outside of the range of characters
cs
, it is consumed and returned. Otherwise, no input is consumed and the combinator fails.- cs
the range of characters to check.
- returns
a parser that parses a character outside the range
cs
.
scala> import parsley.character.noneOf scala> val p = noneOf('a' to 'c') scala> p.parse("a") val res0 = Failure(..) scala> p.parse("b") val res1 = Failure(..) scala> p.parse("c") val res1 = Failure(..) scala> p.parse("xb") val res2 = Success('x') scala> p.parse("") val res3 = Failure(..)
- Note
this combinator can only handle 16-bit characters.
- See also
Example: - def noneOf(cs: Char*): Parsley[Char]
This combinator tries to parse any character not from supplied set of characters
cs
, returning it if successful.This combinator tries to parse any character not from supplied set of characters
cs
, returning it if successful.If the next character in the input is not an element of the list of characters
cs
, it is consumed and returned. Otherwise, no input is consumed and the combinator fails.- cs
the set of characters to check.
- returns
a parser that parses one character that is not an element of
cs
.
scala> import parsley.character.noneOf scala> val p = noneOf('a', 'b', 'c') scala> p.parse("a") val res0 = Failure(..) scala> p.parse("c") val res1 = Failure(..) scala> p.parse("xb") val res2 = Success('x') scala> p.parse("") val res3 = Failure(..)
- Note
this combinator can only handle 16-bit characters.
- See also
Example: - def noneOf(cs: Set[Char]): Parsley[Char]
This combinator tries to parse any character not from supplied set of characters
cs
, returning it if successful.This combinator tries to parse any character not from supplied set of characters
cs
, returning it if successful.If the next character in the input is not a member of the set
cs
, it is consumed and returned. Otherwise, no input is consumed and the combinator fails.- cs
the set of characters to check.
- returns
a parser that parses one character that is not a member of the set
cs
.
scala> import parsley.character.noneOf scala> val p = noneOf(Set('a', 'b', 'c')) scala> p.parse("a") val res0 = Failure(..) scala> p.parse("c") val res1 = Failure(..) scala> p.parse("xb") val res2 = Success('x') scala> p.parse("") val res3 = Failure(..)
- Note
this combinator can only handle 16-bit characters.
- See also
Example: - final def notify(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native()
- final def notifyAll(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native()
- val octDigit: Parsley[Char]
This parser tries to parse an octal digit, and returns it if successful.
This parser tries to parse an octal digit, and returns it if successful.
An octal digit is one of
'0'
to'7'
(inclusive).- See also
- def oneOf(cs: NumericRange[Char]): Parsley[Char]
This combinator tries to parse any character from supplied set of characters
cs
, returning it if successful.This combinator tries to parse any character from supplied set of characters
cs
, returning it if successful.If the next character in the input is within the range of characters
cs
, it is consumed and returned. Otherwise, no input is consumed and the combinator fails.- cs
the range of characters to check.
- returns
a parser that parses a character within the range
cs
.
scala> import parsley.character.oneOf scala> val p = oneOf('a' to 'c') scala> p.parse("a") val res0 = Success('a') scala> p.parse("b") val res1 = Success('b') scala> p.parse("c") val res1 = Success('c') scala> p.parse("xb") val res2 = Failure(..)
- Note
this combinator can only handle 16-bit characters.
- See also
Example: - def oneOf(cs: Char*): Parsley[Char]
This combinator tries to parse any character from supplied set of characters
cs
, returning it if successful.This combinator tries to parse any character from supplied set of characters
cs
, returning it if successful.If the next character in the input is an element of the list of characters
cs
, it is consumed and returned. Otherwise, no input is consumed and the combinator fails.- cs
the characters to check.
- returns
a parser that parses one of the elements of
cs
.
scala> import parsley.character.oneOf scala> val p = oneOf('a', 'b', 'c') scala> p.parse("a") val res0 = Success('a') scala> p.parse("c") val res1 = Success('c') scala> p.parse("xb") val res2 = Failure(..)
- Note
this combinator can only handle 16-bit characters.
- See also
Example: - def oneOf(cs: Set[Char]): Parsley[Char]
This combinator tries to parse any character from supplied set of characters
cs
, returning it if successful.This combinator tries to parse any character from supplied set of characters
cs
, returning it if successful.If the next character in the input is a member of the set
cs
, it is consumed and returned. Otherwise, no input is consumed and the combinator fails.- cs
the set of characters to check.
- returns
a parser that parses one of the member of the set
cs
.
scala> import parsley.character.oneOf scala> val p = oneOf(Set('a', 'b', 'c')) scala> p.parse("a") val res0 = Success('a') scala> p.parse("c") val res1 = Success('c') scala> p.parse("xb") val res2 = Failure(..)
- Note
this combinator can only handle 16-bit characters.
- See also
Example: - def satisfy(pred: (Char) => Boolean): Parsley[Char]
This combinator tries to parse a single character from the input that matches the given predicate.
This combinator tries to parse a single character from the input that matches the given predicate.
Attempts to read a character from the input and tests it against the predicate
pred
. If a characterc
can be read andpred(c)
is true, thenc
is consumed and returned. Otherwise, no input is consumed and this combinator will fail.- pred
the predicate to test the next character against, should one exist.
- returns
a parser that tries to read a single character
c
, such thatpred(c)
is true, or fails.
scala> import parsley.character.satisfy scala> satisfy(_.isDigit).parse("") val res0 = Failure(..) scala> satisfy(_.isDigit).parse("7") val res1 = Success('7') scala> satisfy(_.isDigit).parse("a5") val res2 = Failure(..) scala> def char(c: Char): Parsley[Char] = satisfy(_ == c)
- Note
this combinator can only handle 16-bit characters.
Example: - val space: Parsley[Char]
This parser tries to parse a space or tab character, and returns it if successful
This parser tries to parse a space or tab character, and returns it if successful
- See also
- val spaces: Parsley[Unit]
This parser skips zero or more space characters using
space
.This parser skips zero or more space characters using
space
.- See also
- def string(s: String): Parsley[String]
This combinator attempts to parse a given string from the input, and fails otherwise.
This combinator attempts to parse a given string from the input, and fails otherwise.
Attempts to read the given string completely from the input at the current position. If the string is present, then the parser succeeds, and the entire string is consumed from the input. Otherwise, if the input has too few characters remaining, or not all the characters matched, the parser fails. On failure, all the characters that were matched are consumed from the input.
- s
the string to be parsed from the input
- returns
a parser that either parses the string
s
or fails at the first mismatched character.
scala> import parsley.character.string scala> string("abc").parse("") val res0 = Failure(..) scala> string("abc").parse("abcd") val res1 = Success("abc") scala> string("abc").parse("xabc") val res2 = Failure(..)
- Note
the error messages generated by
string
do not reflect how far into the input it managed to get: this is because the error being positioned at the start of the string is more natural. However, input will still be consumed for purposes of backtracking.
Example: - def stringOfMany(pc: Parsley[Char]): Parsley[String]
This combinator parses
pc
zero or more times, collecting its results into a string.This combinator parses
pc
zero or more times, collecting its results into a string.Parses
pc
repeatedly until it fails. The resulting characters are placed into a string, which is then returned. This is morally equivalent tomany(pc).map(_.mkString)
, but it usesStringBuilder
, which makes it much more efficient.- pc
the parser whose results make up the string
- returns
a parser that parses a string whose letters consist of results from
pc
.
scala> import parsley.character.{letter, letterOrDigit, stringOfMany} scala> import parsley.implicits.zipped.Zipped2 scala> val ident = (letter, stringOfMany(letterOrDigit)).zipped((c, s) => s"$c$s") scala> ident.parse("abdc9d") val res0 = Success("abdc9d") scala> ident.parse("a") val res1 = Success("a") scala> ident.parse("9") val res2 = Failure(..)
- Since
4.0.0
Example: - def stringOfSome(pc: Parsley[Char]): Parsley[String]
This combinator parses
pc
one or more times, collecting its results into a string.This combinator parses
pc
one or more times, collecting its results into a string.Parses
pc
repeatedly until it fails. The resulting characters are placed into a string, which is then returned. This is morally equivalent tomany(pc).map(_.mkString)
, but it usesStringBuilder
, which makes it much more efficient. The result string must have at least one character in it.- pc
the parser whose results make up the string
- returns
a parser that parses a string whose letters consist of results from
pc
.
scala> import parsley.character.{letter, stringOfSome} scala> val ident = stringOfSome(letter) scala> ident.parse("abdc9d") val res0 = Success("abdc") scala> ident.parse("") val res1 = Failure(..)
- Since
4.0.0
Example: - def strings[A](kv0: (String, Parsley[A]), kvs: (String, Parsley[A])*): Parsley[A]
This combinator tries to parse each of the key-value pairs
kvs
(andkv0
), until one of them succeeds.This combinator tries to parse each of the key-value pairs
kvs
(andkv0
), until one of them succeeds.Each argument to this combinator is a pair of a string and a parser to perform if that string can be parsed.
strings(s0 -> p0, ...)
can be thought of asattemptChoice(string(s0) *> p0, ...)
, however, the given ordering of key-value pairs does not dictate the order in which the parses are tried. In particular, it will favour keys that are the prefix of another key first, so that it has Longest Match semantics. it will try to minimise backtracking too, making it a much more efficient option thanattemptChoice
.- kv0
the first key-value pair to try to parse.
- kvs
the remaining key-value pairs to try to parse.
- returns
a parser that tries to parse all the given key-value pairs, returning the (possibly failing) result of the value that corresponds to the longest matching key.
scala> import parsley.character.strings scala> val p = strings("hell" -> pure(4), "hello" -> pure(5), "goodbye" -> pure(7), "g" -> pure(1), "abc" -> pure(3)) scala> p.parse("hell") val res0 = Success(4) scala> p.parse("hello") val res1 = Success(5) scala> p.parse("good") val res2 = Success(1) scala> p.parse("goodbye") val res3 = Success(7) scala> p.parse("a") val res4 = Failure(..)
- Since
4.0.0
- Note
the scope of any backtracking performed is isolated to the key itself, as it is assumed that once a key parses correctly, the branch has been committed to. Putting an
attempt
around the values will not affect this behaviour.
Example: - def strings(str0: String, strs: String*): Parsley[String]
This combinator tries to parse each of the strings
strs
(andstr0
), until one of them succeeds.This combinator tries to parse each of the strings
strs
(andstr0
), until one of them succeeds.Unlike
choice
, or more accuratelyattemptChoice
, this combinator will not necessarily parse the strings in the order provided. It will favour strings that have another string as a prefix first, so that it has Longest Match semantics. It will try to minimise backtracking too, making it a much more efficient option thanattemptChoice
.The longest succeeding string will be returned. If no strings match then the combinator fails.
- str0
the first string to try to parse.
- strs
the remaining strings to try to parse.
- returns
a parser that tries to parse all the given strings returning the longest one that matches.
scala> import parsley.character.strings scala> val p = strings("hell", "hello", "goodbye", "g", "abc") scala> p.parse("hell") val res0 = Success("hell") scala> p.parse("hello") val res1 = Success("hello") scala> p.parse("good") val res2 = Success("g") scala> p.parse("goodbye") val res3 = Success("goodbye") scala> p.parse("a") val res4 = Failure(..)
- Since
4.0.0
Example: - final def synchronized[T0](arg0: => T0): T0
- Definition Classes
- AnyRef
- val tab: Parsley[Char]
This parser tries to parse a tab (
'\t'
) character, and returns it if successful.This parser tries to parse a tab (
'\t'
) character, and returns it if successful.This parser does not recognise vertical tabs, only horizontal ones.
- def toString(): String
- Definition Classes
- AnyRef → Any
- val upper: Parsley[Char]
This parser tries to parse an uppercase letter, and returns it if successful.
This parser tries to parse an uppercase letter, and returns it if successful.
An uppercase letter is any character
c <= '\uFFFF'
whose Unicode Category Type is Uppercase Letter (Lu
). Examples of characters within this category include:- the Latin letters
'A'
through'Z'
- Latin special character such as
'Å'
,'Ç'
,'Õ'
- Cryillic letters
- Greek letters
- Coptic letters
The full list of codepoints found in a category can be found in the Unicode Character Database.
- the Latin letters
- final def wait(): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.InterruptedException])
- final def wait(arg0: Long, arg1: Int): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.InterruptedException])
- final def wait(arg0: Long): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.InterruptedException]) @native()
- val whitespace: Parsley[Char]
This parser tries to parse a whitespace character, and returns it if successful.
This parser tries to parse a whitespace character, and returns it if successful.
A whitespace character is one of:
- a space (
' '
) - a tab (
'\t'
) - a line feed (
'\n'
) - a carriage return (
'\r'
) - a form feed (
'\f'
) - a vertical tab (
'\u000B'
)
- See also
- a space (
- val whitespaces: Parsley[Unit]
This parser skips zero or more space characters using
whitespace
.This parser skips zero or more space characters using
whitespace
.- See also
Core Combinators and Parsers
These are the most primitive combinators for consuming input capable of any input reading tasks.
Character Class Combinators
These combinators allow for working with character classes. This means that a set, or range, of characters can be specified, and the combinator will return a parser that matches one of those characters (or conversely, any character that is not in that set). The parsed character is always returned.
String Combinators
These combinators allow for working with, or building, strings. This means that they can
parse specific strings, specific sets of strings, or can read characters repeatedly to
generate strings. They are united in all returning String
as their result.
Specific Character Parsers
These parsers are special cases of satisfy
or char
. They are worth using, as they are given special error labelling,
producing nicer error messages than their primitive counterparts.
This documentation assumes JDK 17.
JDK 17 is compliant with Unicode® Specification 13.0.
As such, the descriptions of the parsers in this section are accurate with respect to Unicode® Specification 13.0:
using a different JDK may affect the precise definitions of the parsers below. If in doubt, check the documentation
for java.lang.Character
to see which Unicode version is supported by your JVM. A table of the Unicode versions
up to JDK 17 can be found here.
These parsers are only able to parse unicode characters in the range '\u0000'
to '\uFFFF'
, known as
the Basic Multilingual Plane (BMP). Unicode characters wider than a single 16-bit character should be
parsed using multi-character combinators such as string
, or, alternatively, satisfyUtf16
or charUtf16
.
Whitespace Skipping Parsers
These parsers are designed to skip chunks of whitespace, for very rudimentary lexing tasks. It is probably better to use the functionality of parsley.token.
Character Predicates
These are useful for providing to the sub-descriptions of a token.descriptions.LexicalDesc to specify behaviour for the lexer. Other than that, they aren't particularly useful.